Over 1 million tech questions and answers.

windows 2000 pro...blue screened

Q: windows 2000 pro...blue screened

when i start up..it blue screens the following message.....stop: {0000218 } registry file failure {
registry cannot load the hive ( file) ;
/system route/system 32/config/software
or its log or alternate.
it is corrupt,absent, or not writable.beginning dump of physical memory
physical memory dump complete contact your system administrator or technical support group.

Please help me

Preferred Solution: windows 2000 pro...blue screened

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: windows 2000 pro...blue screened

Read other 8 answers


I was just using my PC when it disconnected from the internet. Other devices were still connected so I figured the issue must be with my PC, closed my programs and then tried to restart my PC.

This is when it blue screened with a DRIVER_POWER_STATE_FAILURE error. Once the blue screen reached 100% it hung for a good five minutes before I decided to try a hard reset and now it's stuck on the loading wheel and won't boot up. I'm scared to try another restart but I'm not sure where to go from here.

Any help is much appreciated

Read other answers

My computer occasionally is freezing up randomly with a blue screen.The error is:

*** STOP: 0X00000124 (0x0000000000000000, 0xFFFFFA800082ED028, 0x00000000BE000000, 0X0000000000800400)

System information:

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 8189 Mb
Graphics Card: AMD Radeon HD 6800 Series, 1024 Mb
Hard Drives: C: Total - 953766 MB, Free - 66672 MB; E: Total - 953866 MB, Free - 902255 MB;
Motherboard: ASUSTeK Computer INC., Maximus III Formula
Antivirus: Kaspersky Internet Security, Updated and Enabled

A:Windows 7 Blue Screened 0x00000124

Read other 7 answers


I was just using my PC when it disconnected from the internet. Other devices were still connected so I figured the issue must be with my PC, closed my programs and then tried to restart my PC.

This is when it blue screened with a DRIVER_POWER_STATE_FAILURE error. Once the blue screen reached 100% it hung for a good five minutes before I decided to try a hard reset and now it's stuck on the loading wheel and won't boot up. I'm scared to try another restart but I'm not sure where to go from here.

Any help is much appreciated

A:My PC Blue Screened and now won't boot (Windows 10)

You'll have to try another restart as there is nothing that we can help you with without the memory dump + system files.

Blue Screen of Death (BSOD) Posting Instructions - Windows 10, 8.1, 8, 7 & Vista

See if you can boot into Recovery and run Windows System Restore.

Regards. . .



Read other 1 answers

I have Windows 7 Ultimate installed on my computer and had it up to date on all of the Windows updates. I also have Windows Vista installed on another drive on the computer.
I was using it earlier and it suddenly blue screened at random. I was just browsing Reddit or something when it happened.
Once it blue screened I couldn't get it to work again. The error code it gave me was 0x000000e for both my Windows 7 install and Vista install (both were working fine before this blue screen).
I got on my laptop and downloaded the system repair and put it on a disc. I ran it on my desktop (the computer having issues) and it repaired the boot issues. However, on the Windows 7 install I can get to the login screen and log in now, but it will spend about a minute or two sitting at the 'Preparing your desktop' message before coming up with a screen with nothing but a teal background and in the bottom right it says this:

Windows 7
Build 7600
This copy of Windows is not genuine

It is a legitimate copy and has worked fine for a year before this happened. The background looks like this minus the taskbar and icons: http://www.guidebookgallery.org/pics...win2000pro.png

The Vista install seems to work fine now though. However, I cannot access the drive that has Windows 7 installed on it from Vista anymore. If I try opening it, it will say 'Access Denied'.
Also, the drive letter for Windows 7 changed after running the repair. It was originally drive letter G but it has been changed to F.

... Read more

A:Windows 7 issue -- Blue screened then odd things happened

interesting... ok lets think now... ok i'm assuming you have some knowleage about deul booting.

few questions, can you log in to windows 7 via safe mode? also was this repair disc for windows 7 or vista? and do you have the windows 7 installation DVD?

Read other 8 answers

I am trying to sell my Dell XPS L401X (XPS 14) that I bought in December of 2010 but I have encountered a serious problem with it. I loaded the computer from factory settings as it had blue screen and refused to start up without startup repair and dell datasafe backup or w/e that program is called. I loaded it up, installed Google Chrome, cleared my history on IE, downloaded MSE, the latest nvidia drivers and java 7 64 and deleted all those and emptied the recycle bin once done installing those. I shut down the computer to install updates and get a blue screen as soon as it passes the startup screen. Every time I attempt to launch using startup repair it just opens up another window with a black screen and the option of startup repair and normal repair, never actually going to startup repair, just continually refreshing every time I select startup repair. Please help I need a permanent fix ASAP as I don't want my buyer to experience these issues and send it back.

A:Windows 7 on Dell XPS L401X Blue Screened, Startup Repair not loading

Proceed through the steps in Troubleshooting Windows 7 Failure to Boot and see if that resolves the problem.

You may also consider Clean Reinstall - Factory OEM Windows 7 since the system is no longer under warranty anyway. Just make sure you can read the key on the sticker prior to doing those steps.

Read other 1 answers

Hi everyone im new to this site but i thought you could help me out?
My computer keeps going thru a loop of blue screening and then restarting really fast. i managed to get the errors down on a piece of paper and would like to know what it all means. i can even get past the Xp load screen.

Stop:0x00000024(0x001902fe, 0xf7975378, 0xf7975074, 0x86e49805)

the only thing i put into my pc earlier in the week was a new video card and its driver.
eVGA geforce 8400gs 512MB if that helps

A:I keep getting blue screened over and over again...

Read other 7 answers

Have an HP Pavilion dv2700 that keeps showing a blue screen with the message:

Problem event:blue screen
OS version: 6.1.7601.
Locale ID: 1033

Additional info about problem:
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack:1_0
Product: 768_1

Files that help describe the problem:

What can the problem be? Please HELP!

A:Blue Screened

Hi, some reasons for Blue Screens
New hardware - software installed.
Device driver - Video driver - corrupted - faulty.
Faulty Ram - Overheating - Dying hard drive etc.
Let us have some Pc specifications.
Check and post
TSG System Information Utility - found here.
Post the Minidump files
Create a new folder on the desktop and call it dumpfiles [or something similar]

Look in c:\windows\minidump
Copy the last 4 minidump files to that folder.
Close the folder and right click on it and select Send To Compressed [zipped] Folder.
Windows will compress the file and then save the new zipped file in the same location.

Use the 'Manage attachments' in the 'Go Advanced' reply window below to upload that zip file here as an attachment.

Read other 2 answers


I'm new to this but I figured I'd give this a try. This is a repost of my earlier post I did last week. no replies .

I have an Acer Aspire 5110 laptop and recently I've been getting the bluescreen when starting the laptop. Sometimes it pops up after I login, sometimes on the password screen. The bluescreen usually has HSFHWAZL.SYS (i think). After this, windows usually does a disk check. Sometimes it finds nothing, other times it truncates like 15-20 files.

Currently I'm running WindowsXP Media Center Edition.

I downloaded HijackThis and here's the log file.

If I'm missing anything, please let me know. Thanks!

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 6:19:20 PM, on 30/10/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Acer\Empowering Technology\ePerformance\MemCheck.exe
C:\Program Files\Symantec\LiveUpdate\AluSchedulerSvc.exe
c:\Program Files\WIDCOMM\Bluetooth Software\bin\btwdins.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
... Read more

A:Help im getting blue screened!

Blue screen is Blue screen of Death if it occurs it means that there is some issue with the operating system or the hardware.
it may be the virus issue.
If the error occurs follow the on the screen instructions if it says to restart the computer in the safe mode, try that.

Read other 3 answers

About 2 months ago I bought a Hp G70-460US Laptop that I've been running Vista Home Premium on and it was working perfectly until earlier today when I started to get random blue screens of death. At first I thought it was just a random crash from running too many programs, but it started to blue screen ever more frequently. Earlier I restored it back to 2 weeks prior but I was unable to run programs efficiently and it still blue screened, so I backed-up all that was important onto an Ipod and did a complete system restore to the factory settings, which took about an hour, and at which point it blue screened at startup before even getting to the administrator log-in screen. I've now attempted to boot it into safe mode, however it no longer even recognized that windows is even installed and asks for it to be, and when booted regularly, it just shows a black screen. I'm fairly certain it may be a driver issue, however seeing as I can no longer boot the computer to get the blue screen, it's difficult to check what the problem actually is now. I've never had this problem before and I'm not much of a computer wiz, so I'm not sure what I should be doing to fix it. Does anyone have prior knowledge or possibly some insight on how to fix this problem? It would be greatly appreciated. I haven't given much information other than the problem itself, so if some is needed, just let me know. Also I'm new to this forum, so if this thread is in the wrong place, I apologize. Edit: I attem... Read more

A:Vista Blue Screened

Hello Werty789,
Welcome to Vista Forums!

I think that there was a little glitch that turned big (sounds weird i know).
But since you backed up all of your files thats super. I would suggest you do a clean installation of your version of vista. This way, you can have a fresh start and hopefully your BSOD will be gone. Also, make sure you allow windows to update itself after installation so it downloads and installs all the proper updates.

Let us know how it goes,

Read other 10 answers

debug-CommanderJoe-xxxx.zip.zip I was on google plus and facebook when my BSOD happened I do not know what is wrong and would like to know thank you

A:Was blue screened unknowing why

The cause of the crash is Norton/Symantec, although this crash looks to be a single one which is handled by Windows.
This means that you have nothing to worry and do not need to do anything
If this problem keeps occuring, simply reply again here with a new zip from the DM Log Collector and I'll be notified

* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck FC, {fffff800714f1fe8, 8000000053c32121, ffffd0002117a0f0, 2}

*** WARNING: Unable to verify timestamp for BHDrvx64.sys
*** ERROR: Module load completed but symbols could not be loaded for BHDrvx64.sys
Driver Reference Table - BHDrvx64.sys

Read other 0 answers

Please help! I am new to this forum. I tried to follow a tread on this but it got so confussing. Does someone have a step by step reply? Issue is Blue screen "A driver has overrun a stack-based buffer". Its on my teen son's PC (need I say more). System has been down for months got tierd of working on it till now. The begining:
1) System starts and said it had two spywares running at same time. After 4 mins the system would freeze, not giveing much time to do anything
2) I started in safe mode and removed my Nortons since I could not this "other" spyware. After a reboot windows said it removed a few malice files. Forgot the the files for this "other" spyware" but it had a tool bar on IE and ended with (4.1?)
3) System worked fine. However as I tried to install a new antivirus I found that neither of my CD/ DVD drives would work (device manger, would not let me update driver). I even moved the drives to the other IDE controller but got the same thing. After two days I found someone who gave me step by step insrtuctions to remove two reg files. Got the drives to work.
4) Now I have this blue screen message. I have removed one by one each hardware item and I still get the problem.

Please help me! John

A:Blue screened, after other issues

Hello John, Welcome to TSF!

Please read this article? "Having problems with spyware and pop-ups? - First Steps"; follow the instructions very carefully; then, post all the requested logs and information; as instructed, in the HiJackThis Log Help Forum.
(Simply, click on the coloured links to be re-directed.)

Please ensure that you create a new thread in the HiJackThis Log Help Forum; not back here in this one.
(Please change the new Thread Subscription to ?Instant Email Notification? so that you receive an email as soon as a reply is posted,)

When carrying out The 5 Steps, if you cannot complete any of them for whatever reason, just continue on with the next one until they are all completed.
However,it is extremely important to make mention of the fact that you could not complete any of the steps in your post to The HJT Help Forum; where an Analyst will assist you with other workarounds.

Once done, please be patient, as the Security Team Analysts are usually very busy; one of them will answer your request as soon as they can.

Good Luck with it.

Kind Regards,

Read other 1 answers

I've been getting the blue screen of death several times a week, if not several times a day, for several months now. It almost always comes when I am surfing the internet, especially--but not particularly--when I'm accessing video sites such as Hulu or MSN Video, although I don't even need to be playing something in such sites--if the window's even up, it will likely give a blue screen somewhere in the next hour. Lately, though, just running a browser can cause it to blues creen.

My blue screen says at the top something to the effect of: driver-not-less-or-equal; I've never been fast enough to catch the specific numbers, but I can try if they're needed.

I've tested this in the latest versions of: IE, FF, Opera, Flock, and Safari and all equally cause a blue screen crash.

I have an Acer E380 8 month old system with:
Vista SP1
AM2 Socket MB (I believe, and don't know the exact model)
Athlon 64 X2 4400+ @ 2.31 GHz
NVIDIA GeForce 6150SE nForce 430 (I now just installed a NVIDIA GeForce 8600 GT and it did not remedy anything)
Realtek High Definition audio
320 GB Western Digital HD
Came with 250W PSU (I put in a 750W PSU to try some upgrades with the new graphics card, but somehow that combination gave more blue screens so I took both of them out)
I have about 6 USBs hooked up drawing various amounts of power and I use a Wacom tablet as my main mouse/input, but the problem started way before that...so don't know if that means anything.

I also hav... Read more

A:I'm getting blue-screened to death

Hi dgal. . .

Welcome... to your first thread in the TSF Vista Support Forum.

I see that you have been a member since last November, but this is your first thread and post. Sorry it had to be under a BSOD watch. Let's see if we can locate the cause.

I need some items and I have a few things for you as well. There is a zip file attached to this post containing a batch file named minidump-msinfo32.bat. Please download it and extract it to your desktop. Right-click on the desktop batch file icon and select Run as Administrator. The black "DOS" command screen will appear and scroll followed by the smaller Vista screen while msinfo32 runs. Give it a few minutes, then go to your documents folder where there should be a new folder named TSF_08-21-08 containing the dump files (with names similar to Mini082008-01.dmp), a text file and the msinfo32 NFO file. Zip the entire folder up and attach to your next post.

In the interim, please check WERCON - Windows Problem Reports and Solutions as it usually does contain information on the system crashes that may prove to be helpful.
START | type wercon.exe into the start search box | right-click on wercon.exe under programs above | run as admin | view Problems to Check & Problem History.

Also check the Device Manager for any red/yellow flags.
START | type dev man into the start search box | right-click on Device Manager up top under programs | run as admin

Regards. . .



Read other 6 answers

Ok this is how it started...first I will list sys specs so that you know what it is I am running...

Pentium 4 2.4ghz 400mhz bus
1536 meg ddr 2700 ram
Geforce fx 5200 256 meg video card
Intel motherboard Model: D865gbf
Windows XP Pro
Browser: Mozilla Firefox ( i do not use IE )

Keep in mind I have been running a smooth system for over a year now. I frequently run Ad-aware PE, Spybot S&D, Hijackthis , Nortan system works 2004, Avast Virus removal program, and System Mechanic. I am very contious of what and where I download from... I do currently have Kazaa and Limewire on my computer but I do not download anything but music and the last few months the only program I have even downloaded that from is Limewire.

Two nights ago I was playing an online game when all of the sudden for the first time I lost connection. I figured it was an internet issue only to log out of the game and to see my internet was still up and running. I then try to go back into the game ( everquest ) but it would not connect to a server for some reason. Again I thought it was my internet... So i rebooted the computer.
While I was rebooting I noticed that it was taking an awefully long time to reboot....pausing almost a minute or two on each load screen. It normally takes my computer less then 30 seconds to reboot.

After windows was back up and running the boggyness didnt cease... I had somewhere from 4-10 second delays on clicking open a program or the internet. So normally I reboot once more to see... Read more

A:Blue Screened! ahhhhh help please

I'm not a security expert, but this looks just a little suspicious.

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Window Title = Have a nice cup of stfu !

Read other 3 answers

keep getting blue screened and my computer reboots and I cannot figure out the problem. It gives me different errors every time. And seems to happen at random not during anything in particular.
My build:
Amd phenom II 3.6 ghz quad core psu
Gtx 950 sc gpu
Mai 970 a motherboard
G skill Ripjaw 2 x 4 gb ram
Cooler master 400w power supply
Western digital 500 gb hard drive
Windows 10 64 bit os

The errors I managed to see are
Driver IRQL NOT LESS OR EQUAL (dxgmms2.sys)
Page fault in non paged area
System service exception
Kmode exception not handled

A:keep getting blue screened and my computer reboots and I ca

Read other 7 answers

Hey guys I need some help, I just brought my computer to the college dorms, set it up, and was working fine for around 4 hours. Then I got a blue screen while chatting and it said something about checking my hardware. When I restarted, it says "error loading OS".

I restarted once more pressing "delete" and checked the "Standard CMOS Features" and it doesn't show my primary hard drive, "primary ide master : none" but it shows my 2nd slave drive.

Anyone know what happen to my computer?
Is there anyway to fix this problem? No computer at college =

A:Blue Screened, then computer malfunctions

Read other 12 answers

Yesterday my machine blue screened and would not boot back up.  I ended up having to remove the harddrive and doing a chkdsk /f /r.  It does boot up, but very slow.  I ran malwarebyte and it found Trojan.Agent.Gen.  It only aloud me to quarantine.  I want to make sure There isn't anything else causing damage.
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 9.0.8112.16555  BrowserJavaVersion: 10.51.2
Run by Dawn at 11:14:17 on 2014-07-09
Microsoft Windows 7 Professional   6.1.7601.1.1252.1.1033.18.16366.10597 [GMT -6:00]
AV: Symantec Endpoint Protection *Enabled/Updated* {63DF5164-9100-186D-2187-8DC619EFD8BF}
SP: Windows Defender *Disabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Symantec Endpoint Protection *Enabled/Updated* {D8BEB080-B73A-17E3-1B37-B6B462689202}
FW: Symantec Endpoint Protection *Enabled* {5BE4D041-DB6F-1935-0AD8-24F3E73C9FC4}
============== Running Processes ===============
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\system32\svchos... Read more

A:Blue screened and wouldn't restart

Hi there,my name is Marius and I will assist you with your malware related problems.Before we move on, please read the following points carefully. First, read my instructions completely. If there is anything that you do not understand kindly ask before proceeding. Perform everything in the correct order. Sometimes one step requires the previous one. If you have any problems while following my instructions, Stop there and tell me the exact nature of your problem. Do not run any other scans without instruction or add/remove software unless I tell you to do so. This would change the output of our tools and could be confusing for me. Post all logfiles as a reply rather than as an attachment unless I specifically ask you. If you can not post all logfiles in one reply, feel free to use more posts. If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed. Stay with me. I will give you some advice about prevention after the cleanup process. Absence of symptoms does not always mean the computer is clean. My first language is not english. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.    Scan with aswMBRPlease download aswMBR ( 4.5MB ) to your desktop.Double click the aswMBR.exe icon, and click Run.There will be a short delay before the next dialog box comes up. Please just wait a minute or two.When asked if you'd like to "download the latest Avast! virus d... Read more

Read other 8 answers

yo i already did a search on "unmountable boot volume"
i have win xp pro dell dimension 8200
my question is can i use a windows xp home cd to repair my files? will it mess up my windows xp pro?

A:help blue screened! boot volume

No it will not mess up your Pro version . . the repair will not run.

Unmountable boot volume will usually indicate a hard drive failure . . Does BIOS redognize the drive?

Read other 2 answers

A problem has been detected and windows has been shut down to prevent damage to your computer.
The problem seems to be caused by the following file: partmgr.sys

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installtion, ask your hardware or software manufacturer for any other windows updates you might need.
If this problem continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advance Startup Options, and then select Safe Mode.

Etc etc..
Installing fresh windows onto laptop, gets to 73% when formating the hard drive then I get this blue screen, tried about 4-5 times. Using a Windows XP cd.
Its a Toshiba Satellite 1905-2301 laptop.
Worked ok before I tried this, just was running slow and laggy from spyware and virus's.

A:blue screened while formating hard drive

Read other 11 answers

Hi, I am running a laptop with nvidia optimus, using an intergrated card and a 310m geforce. I was using my computer as usual, when it blue screened on me, then rebooted. Afterwards, my resolution was messed up, and the computer no longer dectected the 310m! I have tried reinstalling some drivers, but they do not detect the card. I know the card is there, as I have used it previously.

Read other answers

A problem has been detected and windows has been shut down to prevent damage to your computer.
The problem seems to be caused by the following file: partmgr.sys


If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installtion, ask your hardware or software manufacturer for any other windows updates you might need.
If this problem continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advance Startup Options, and then select Safe Mode.

Etc etc..
Installing fresh windows onto laptop, gets to 73% when formating the hard drive then I get this blue screen, tried about 4-5 times. Using a Windows XP cd.
Its a Toshiba Satellite 1905-2301 laptop.
Worked ok before I tried this, just was running slow and laggy from spyware and virus's.

A:blue screened while formating hard drive

Did you fdisk the drive before attempting to install XP?

Read other 2 answers

Hi, recently installed a new cpu motherboard and graphics card. Reinstalled windows, and now the machine is crashing occasionally. It crashes anywhere between instant on start up or 40 minutes into browsing. I uploaded the zip file per your BSOD posting instructions.

I've done a little researching on my own and I think it may have to do with the Realtek audio controller conflicting with my nvidia graphics card in some way. Although since the computer is blue screening I'm hoping your diagnoses might help me figure out if that is actually the problem.

*** STOP: 0x00000124

A:Computer blue screened, details inside.

Hiya and welcome to SevenForums!

BugCheck 124, {0, fffffa800a06b028, bf800000, 124}

Unable to load image \SystemRoot\system32\DRIVERS\cfosspeed6.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for cfosspeed6.sys
*** ERROR: Module load completed but symbols could not be loaded for cfosspeed6.sys
Probably caused by : hardware
MODULE_NAME: hardware

IMAGE_NAME: hardware




Hmm, is your CPU compatible with your new motherboard? Remove Asus TurboLAN.

Read other 1 answers

For the second time in the last few months We've had a partial network outage that was traced to a blue screened machine. This time, the BSOD referenced storport.sys.  The issue being caused is that the switch gets flooded with unknown traffic and that
goes as far as the uplinked switch that gets taken down.
I can't find anything that stands out in a wireshark trace, but as soon as that machine is unplugged, everything is fixed.  What could possibly be causing this and how can it be prevented?

Read other answers

Here is the error code and the minidump. Thx

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.
Locale ID: 1033

Additional information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 833C6487
BCP3: AA01375C
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:

A:BDOD upgraded towondows 7 and 2010 blue screened

Quote: Originally Posted by Amstel117

Here is the error code and the minidump. Thx

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.
Locale ID: 1033

Additional information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 833C6487
BCP3: AA01375C
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:

These were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier

I'd suggest that you first backup your data and ... Read more

Read other 1 answers

Hello everyone I'm new to the board and I apologize for not having the time to read through all of the beginning tutorials and scanning to see if this has already been addressed on the site. I've learned more about computers in the last eight hours then I could ever imagine. I have a Lenovo T420 running Windows 7 enterprise service pack two. My computer won't boot up in windows regular mode or safemode. I believe I deleted a registry file and that blue screened my computer. My computer has windows bit locker Drive encryption in which I am an administrator and have the key. I have until tomorrow to get my expense reports submitted for the last three weeks so that I can get reimbursed and my computer picked a doozy of a time to get a virus. Specifically the Mal/Iframe-AH that I thought was quarantined. I believe it is this virus that has: Redirected Google, mirrored other websites, taken over all Internet downloads from Firefox and Internet Explorer, told me Skitch needed an update, and I downloaded a SCARY version of Skitch, and fakes the virus protection scan when I ran it. I went into the registry and deleted a file that basically blue screened my computer. I'm at a point now where I can get to the command prompt however I believe the startup repair from bitlocker is overriding my boot up disk. I did change the boot order from advice from a Lenovo rep over the phone but I still haven't seen the start up menu for the Microsoft, I believe, system s... Read more

A:Blue screened because I deleted a registry file and a nasty virus.

Do you remember what file you deleted, which started the blue screening?

Read other 14 answers

Window XP Professional: when starting, interupted by blue screen with error message Fat 32 D:volume (something) 1DOB-3241 verifying files and service and then system checks out OK and starts. Since loading Windows Live and Live security have had very slow response until all of it is loaded (sometimes up to 45 minutes before I can get on Internet Explorer).
I think my D drive is too full--cannot complete defrag since there is only 9% free space on disk. C drive is nearly empty. I think I have to move some of these files to C but I don't know how. Does anyone know if these problems are connected to error message at start-up or are they separate issues? Had broadband service check over weekend and they said its not their problem. I'm not too techy but fast learner if someone has patience to help....Thanks.

A:Blue-screened error @ startup: D: volume service Fat32

To move the files right click on them and select "copy", then make a folder on your C drive and in that folder right click "paste"

Once the files have been moved, you can go back to the D drive and delete them. Don't delete all of the files on D, just the ones you put there.

You should not store any of your files on the D drive, this is most likely a restore partition and should not be used by you.


Read other 2 answers

I was using my computer as usual and after I came back after eating, I saw a completely black screen. I turned my computer off and as it booted back up it blue screened, telling me there was a problem with memory management.
I turned it back off and fully depowered my motherboard, popped my ram in and out, just in case.
I turned it back on and nothing showed up on my monitor. My mouse and keyboard lit up and I got the regular system beeps. I plugged my HDMI cable into my motherboard with the same results. The cable works and the port on my monitor works as well.

A:Blue screened with message Memory Management, now no longer displays to monitor

Do you have another video card that you can try in the system?
If not, you may want to purchase one from a place that accepts returns (and gives you your money back) - in case you don't need it.

Read other 1 answers

Hi all, my son's Dell Optiplex all-in-one blue screened once. It then gave options and my son selected reboot. It would then not boot up at all (power is present as screen will come on in HDMI mode) . Bizarrely, by experimenting we realised that it will boot up ONLY if you go through this process every time:
 - remove both RAM
 - power up (it gives the beep to say memory not found)
 - power off and return one of the memory and power on
 - it briefly powers on and then powers off (we worked out that it does this as recognises it has a change in memory)
 - power off and add the other memory
 - again, briefly powers on but turns off. Power on again and voila all OK and boots Windows
However, if you then power down, it will not power back up unless you go through the above again.
Does anyone have any ideas as I am stumped with this and I need to get it working again for my son's school work. Thank you in advance.

Read other answers

Does anyone know if there is a log so I can copy and paste it here? It's happened a few times since I started connecting to the internet.

A:Just got blue screened and "system has recovered from serious error"

Read other 7 answers

Hello all,
I have a Windows 2000 Professional computer with all the latest updates and serivce packs installed. Recently I gotten this error message during windows bootup: Error Message: Windows Could Not Start Because the Following File Is Missing or Corrupt: \Winnt\System32\Config\Systemced. I found the problem on Microsoft's website and yes their solution does correct the problem but my question is what caused the problem?

The cause that Microsft lists on their website does not affect me. I do have a motherboard with 2 built in RAID controllers. For more info on my computer click on this link: http://www.supermicro.com/products/system/tower/5033/SYS-5033C-T.cfm. I use only 1 RAID controller and it's the Marvell Hercules I controller. My computer is setup as a RAID 1 mirrored drive. I do have my computer on UPS as well.

Actually this is a computer the company that I work for sells to our customers. We have sold about 25 of these computers configured the same and all hardware and the same and configured. 4 of these computer have gotten the error that I listed above at 2 different locations and the others at different locations are working fine.

What is causing this problem? Why are the other computers at other locations are fine and why do the computers that we send too 2 different locations keep getting the error message over and over again?

The computer specs can be found here: http://www.supermicro.com/products/system/tower/5033/SYS-5033C-T.cfm

We install t... Read more

A:Windows 2000 PRO Blue Screen

Read other 8 answers

Someone else used my pc and now when I boot up I get a blue screen.
The message is inaccesible_boot_device.
I can't boot up in safe mode. It come up right after the "starting up" screen.

Anyone know what I can do or what the problem is?


A:Windows 2000 blue screen

Read other 16 answers

I've now run Memory86Test and Hard Drive Diagnostics without any faults found thus far. I am doing an "Exerciser" test on the hard drive. I'm puzzled by all this too, since I also have a second identical EVO laptop which I swapped over this hardrive into and I get the same response from it in that laptop. I'm leaning toward some part of the boot sector being damaged or a cluster on the hardisk being bad. Can a sector be skipped if it is bad? Not sure what to do now. Any advise? Please!

My computer had been running slow ( It is a 610 Compaq EVO laptop) and I had been getting memory dump occurences all along here. I tried cleaning up my PC doing defrag and using Adaware, etc. prior to my final dilemma. I had been in safe mode doing some of this cleaning up and now I have this problem after rebooting.

When I boot now regular or safe mode, it brings up a new blue screen right after the Windows 2000 screen. The message is
"*** Stop: 0x00000050 (0xE8565B98, 0x00000001,
*** Address BFF3DD3C base at BFED3000, DateStamp 3ebc05a5 - Ntsf.sys"

I cannot seem to get this message even with the Win2000 Installation CD. I cannot get the repair option to appear either while booting off the Win2000 CD.

Please Help!!!

Read other answers

By trying to reconnect to the internet I messed up Windows 2000 Pro by trying to add a Windows component under add remove programs. I think I tried to add Network services and Other Windows Networking file and print services. One thing to note, I do not have any win2000 setup or recovery CDs. Now when it boots, it goes to a blue screen after booting up with no Icons. It will however, boot into safe mode with icons if you hit F8 but I don't have a clue on how to correct the regular boot up problem. The windows 2000 pro machine hooks up (when it works OK) wirelessly to a Netgear router which is running as an access point that is piggy backed to Lan #4 on a d-Link router which has 2 other machines hardwired to the D Link router. I also have a wireless Dell Laptop which hooks up with no problem to the access point. Can anyone give me some help?

A:Windows 2000 Pro boots to blue screen Help please!

Read other 8 answers

I've been contending with this problem for a while. Here is my hardware setup:
Abit KD7A motherboard (on-board sound/NIC *disabled*)
2 Maxtor HDDs (one 80GB, one 60, IDE 7200RPM)
Crucial 256MB DDR RAM 400
I'm currently using an ATI Rage AGP card, I was also using a GeForce AGP card but using different ones didn't seem to help. I generally run it with a PCI NIC card i nstalled but that doesn't seem to make any difference, either.

I have checked the RAM for integrity and it has come out okay. I had this problem on my old install of Windows 2000 but having recently re-installed, it is still giving me consistent problems. There are no bad clusters on the HDDs. I have no video drivers installed; the only drivers installed are for the NIC.

In the past week when testing I have had a variety of STOP errors when doing things like running Windows Update or just looking around the computer. A few are:
TOP: 0x00000050" ntoskrnl.exe (this is a popular one, I only was able to write down this bit cos it was before I discovered MEMORY.DMP)

here is the latest:
*** STOP: IRQL_NOT_LESS_OR_EQUAL 0x0000000A (0x000000, 0x00000002, 0x80437ECF

*** Address 80437ECF base at 80400000 DateStamp 384d9b17- ntoskrnl.exe

got it during winupd. CPU burn-in doesn't seem to do the trick for crashing it. If you've got any ideas, please let me know, I am assuming it is a BIOS misconfiguration or some sort of hardware problem. Thank you in advance.
-rossssss... Read more

A:Windows 2000 Blue Screen Crashes

Read other 14 answers

I did something silly the other day that trashed my partition tables. So I reformatted the hard driive and then reinstalled Win 2000 Pro and Service Packs 1,2,3,4, then went to the Microsoft website for Win 2K updates. Microsoft sent me 32 updates, all in one batch.

As soon as the updates were complete, I rebooted *immediately*, and was rewarded with the Blue Screen Of Death with message as follows:

" STOP*** 0x000000A1 (0xDEAD010, 0x820C7030, ox00000000, 0x00000000). Inconsistency detected in the PCI Bus Driver's internal structure."

The BSOD message then made the following suggestions:

"Check to make sure any new hardware or software is properly installed" <I had not installed any new hardware or software>.

"Disable BIOS memory options such as caching or shadowing" <I did that, no joy.>

"Use SAFE MODE to remove or disable components" <I tried to boot in SAFE MODE but it gave me a Blue Screen insteadl>.


I repeated the reinstall of Win2K, SP1,2,3,4 and, as soon as I downloaded the 32 updates from Microsoft update, tried to reboot. Same thing.

One very odd feature: the updates refused to install separately, with a separate reboot for each update, and insisted on installing as a single batch.


I have checked google for "0x000000A1 (0xDEAD010, Ox820C7030" and got two references to this problem but no solutions.

I note that I have been running Windows 2000 Pro for three ... Read more

A:Blue Screen after Windows 2000 updates

Read other 10 answers

I am getting a blue screen when I boot up a windows 2000 server. Nothing recently changed. The message is below.
STOP: 0x0000001E (0xc0000005, 0x804b9d71)
Kmode_exception_not_handled address804b9d71 base at 80400000 date stamp 3975dfdf- ntoskrnl.exe:

A:Windows 2000 server Blue Screen

Depress F8 when booting and select Safe Mode or Restore.

Read other 3 answers

Please help guys. I have had my OS (win 2000) for 2 years. Yesterday my computer just wont start up - fan comes on, all looks good, get the usual "windows is starting up" screens, then it gets to a blue screen (as usual).

Then I hear the computer noises slow down, and nothing else happens. Sometimes the start button appears but when I scroll to it, the arrow just becomes a dumbell and I cant do anything. Leave it for 2 hours - no help. Restarting over and over keeps giving the same thing. Just a blue screen and an arrow that is controllable with mouse.

No idea what has happened or how to fix it!

A:Windows 2000 - no start up - blue screen only

Welcome to TSG....

If you can boot into safe mode go to device manager and find the display adapter and write it down for reference, then delete or remove it and exit out normally using OK as much as you can. Then reboot the computer and see if Windows will re-install on boot up.

Read other 2 answers

whenever i play world of warcraft within 20mins or so i get a blue screen stop message. 0x000000BE
and A00E5FAC at A000000

A:windows 2000 stop message(blue screen)

Memory addresses. Try reseating your memory and possibly add more RAM.

Read other 1 answers

Cannot start computer --> get blue screen ***STOP: 0X0000007B (0X8207AA10,0XC0000032,0X00000000,0X0000000) INACCESSIBLE_BOOT_DEVICE

I've tried all the F8 options without success. I cannot get started to check anything, I'm just stuck with nowhere to go. I've just relocated the Dell Dimension 4100 from work to home. It started up fine last night but when I moved it into it 's final location, I'm getting the BLUE SCREEN at the Windows start-up. The message says to check for viruses, remove any newly installed hard drive or hard drive controllers, check for hard drive corruption and that it is properly configured. How do I check if I can't boot? I've added or altered nothing except moving it to a different location and I don't have the original start-up disk since I aquired it from work as a "give-away".

Any suggestions?

A:Windows 2000 blue screen STOP 0X0000007B

Sounds like something's come loose. If you've never been into a tower before make sure you discharge any static or it'll fry the motherboard. Make sure everything's turned off and check cables etc and phericals in slots.

If all else fails the f key to press is F11 which will give you options to reset to factory settings.

Read other 3 answers


A friend was having problems installing webcam 3 onto his PC. I discovered lots of missing files effecting installation and decided it maybe a good idea after removing the viruses and spyware to reinstall Windows 2000 professional back over the top.

When this was done windows starts up but continues in 'setup mode' with a progress bar running along the screen saying its installing devices as part of upgrade, your screen may flicker at some point etc. When it gets about half way it crashes with a blue screen saying system error Vobid.sys may be responsible with two lines underneath stating BF703380.

Even if you start in safe mode it still tries to finish the windows 2000 install so the same thing happens again! It could be something to do with the webcam 3 driver that only half installed but know I cant go anywhere or do anything to uninstall it.

If anyone's got any ideas I would be very grateful has he now has no PC and isn't too pleased.

Thanks in advance

A:[Solved] Windows 2000 Blue Screen during setup

Read other 7 answers

hey i recently got a computer from my granddad that was having some trouble. when i start up it goes to the boot up page starts window but instead of going to the log in screen i get the blue screen with this message in the top left hand corner. STOP:c0000218 {Registry File Failure} the registry can not load the hive (file): /systemroot/system32/config/SECURITY or its log or alternative It is corrupt, absent or unwritable. please let me know if you know how to fix this. thanks for you time.
P.S. i plan on clearing the hard drive and i have a OEM recovery CD so if there is a way just to start over, i could easily just do that.

A:blue screen of death help windows proffessional 2000

You can either run XP repair or do a Clean Install by booting to the cd:

Read other 1 answers

I have installed a clean new copy of Win2000 on a brand new component system. I have installed all new drivers to my knowledge and all windows updates and have tried 3 or 4 new clean reinstalls of win2000 and the same prob occurs. A blue screen comes up that says

*** STOP: 0x0000007F (0x0000000D, 0x00000000,0x00000000, 0x00000000)

Begininning dump of physical memory
physical memory dump complete. Contact your system administrator or technical support group

WELL GUYS, you are my tech support group I guess and I cannot figure this out. Please help, I will answer any other questions you have about what is going on. Thanks a lot.

A:Windows 2000 blue screen and restart problem

I have installed two different sticks of memory and it continues to do this, so I do not think it is a memory problem.

Read other 3 answers

OS:windows 2000
ram:1.24 gigs

vid card:ati radeon 5600
exact error message:
***STOP 0x0000007B (0x85E2DC30, 0xC0000032, 0x00000000, 0x00000000)

if this is the first time you have seen this stop error screen restart you computer. if this screen appears again follows these steps:
check for virus's on your computer. remove and new installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. run CHKDSK /F to check for hard drive corruption , and then restart your computer.
refer to your getting started manual for more information on troubleshooting stop errors.
frequency i receive error: every single time i try to start my computer it goes to that blue screen of death
date/time error started: 12:10 pm 10/19/2009

now i have tried to reboot in safe mode, safe mode with networking, safe mode with command prompt, and every other option that u are given when you press F8 during the windows loading screen. none of it works, it always goes to that blue screen of death.
the problem occurred after i tried to open the installation file i downloaded from dungeon fighters online(a video game). so what happened is this, i tried to open the video game install file, but nothing happened, i hit ctrl alt del to see if it was even opening and in my process, it wasnt, BUT my computer was super laggy still, like something was trying to open, but nothing was happening, so i waited and... Read more

A:cant start windows 2000(blue screen of death)

see this post

Read other 1 answers

I am having a problem with my Windows 2000 hard drive - Whenever I login, the computer gets a blue screen of death that lasts about 1/2 a second then reboots.
I am assuming it is software related as it logs in, loads things like Nvidia config, AVG, etc, THEN crashes.

I dual-boot with Kubuntu 7.10 (Main hard drive, also has some recent problems.), and I tested my memory using Ubuntu 7.10 memtest.

I use Grub 1.5 to choose OS's or memtest, Windows and Linux are on separate hard drives.

Here are my specs:
AMD Sempron 3100+
Palit Geforce 8400 GS (Not overclocked)
1.2gb's DDR memory (1x 1gb, 1x 256mb)
Windows 2000 on one drive.
Kubuntu 7.10 on the other.

When problem started:
Yesterday, I swapped CPU's from an AMD Athlon 2800+ to an AMD Sempron 3100+.
Before, I had a problem where my computer would crash when doing 3d things, but only with the Geforce 8400, not a FireGL x3100. Setting the hyper transports from 4k to 2k fixed the problem. Problem was fixed after CPUs were switched.
Before that problem was fixed, while using the FireGL, the BSoD problem didn't exist.
Can anyone help me fix this?

Note: Problem does not persist in safe mode, as said in title.

A:Windows 2000: Blue screen of Death after login

Mabey your PSU cant supply enough power? That is one cause for a blue screen of death

Read other 4 answers

Hi! My boyfriend's old laptop died, leaving us scrambling for a new one. We got a great deal (free) on a good laptop (needs a new battery), but it didn't have a harddrive. To cut my usually verbose self short, we don't have the time or money right now to get a second drive and then a connector so that he can get his data off his old drive.

SO, we just want to put the old drive in the new laptop. I've done that, and it recognizes the drive in BIOS just fine. It can even start Windows 2000...but then it comes with the Blue Screen. I'm not surprised, considering that it's geared for the old laptop, but I was oh so hoping that there is a way to get it to function properly without erasing all his files.

I tried doing an emergency repair with Windows 2000, but to no avail.

What are the chances that upgrading to Windows XP will solve our problem?

Do you think that it's just not going to work, period, and that the blue screen would not go away even with a reformat? All the data on it is recoverable, but it would be time consuming so we'd rather not try this unless absolutely necessary.

Any help on the subject would be greatly appreciated.

A:Moved Old Windows 2000 HDD to New Laptop.. How to Defeat the Blue Screen?

Read other 10 answers

Okay hopefully I can explain this problem clearly. I installed windows 2000 professional...wow nice operating system so I thought. Within a few days my computer was rebooting on its own. Well at first I thought my roomies were messing with my computer....grrrrrrrrrrr...but alas that wasn't the case. This continued until one day while I was on aol my screen suddenly went blue and quickly rebooted. Now the error message was so fast I could barely read what it said but I did catch something about dumping memory files and watched with horror as the countdown went to 100 and rebooted. Oh boy I thought, this can't be good. Now when I get on my computer in the mornings I can always tell when it has rebooted itself...which seems to be a daily activity. Ummmm HELPPPPPP!!!

A:blue screen, dumping mem files and rebooting of windows 2000

Run DRWATSON to have it capture more details and post what it reports. It will run in background until needed so start it as soon as you can. Good hunting and good luck.

Read other 1 answers