Over 1 million tech questions and answers.

Possible to mark additional groups as Sensitive?

Q: Possible to mark additional groups as Sensitive?

In addition to the default list of sensitive groups, is it possible to configure additional groups as sensitive?
I'd like to get notified if there are any changes to other groups, like Exchange Admins, or ones that have elevated rights in our organization.
This is on ATA 1.8

Read other answers
Preferred Solution: Possible to mark additional groups as Sensitive?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


How could I dump the list of the users/groups who has sensitive privileges. is there any column on the mongodb that I can query
Thank You,

Read other answers

Hi everybody,
ATA V. 1.9.7312.32791 - fresh install, no update
Just recently installed Microsoft's ATA. I only use lightweight deployment option for ata gateways on every domain controller available, no other ata gateways in use. So for my understanding I don't need any configuration of event forwarding since the lightweight
gateways are able to read any event locally.

I am not able to get a report about modifications of sensitive groups, it's greyed out. An informational message below it says: "No modifications of sensitive groups were observed, make sure that events forwarding is properly configured."
I changed many things about my sensitive groups for testing purpose btw.
Any hints?

Thanks, regards, tim

Read other answers

I am testing sensitive account modification and it isn't working. When I looked at the logs, I see the following event over and over. I am running lightweight gateways, version 1.9.7312.32791. Does the lightweight gateway service need special permissions
to read the event logs? 

2018-05-31 21:51:43.9737 2664 102 Error [EventLogException] System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
   at System.Diagnostics.Eventing.Reader.EventLogException.Throw(Int32 errorCode)
   at System.Diagnostics.Eventing.Reader.NativeWrapper.EvtSubscribe(EventLogHandle session, SafeWaitHandle signalEvent, String path, String query, EventLogHandle bookmark, IntPtr context, IntPtr callback, Int32 flags)
   at System.Diagnostics.Eventing.Reader.EventLogWatcher.StartSubscribing()
   at Microsoft.Tri.Gateway.Collection.Events.EventListeners.WindowsEventLogReader.<UpdateWindowsEventLogReaderBookmarksAsync>b__15_1(KeyValuePair`2 _)
   at MoreLinq.MoreEnumerable.ForEach[T](IEnumerable`1 source, Action`1 action)
   at async Microsoft.Tri.Gateway.Collection.Events.EventListeners.WindowsEventLogReader.UpdateWindowsEventLogReaderBookmarksAsync(?)
   at async Microsoft.Tri.Infrastructure.Framework.Module.<>c__DisplayClass30_0.<RegisterPeriodicTask>b__1(?)
   at async Microsoft.Tri.Infrastructure.Extensions.TaskExtension.<>c__DisplayClass33_0.<RunPe... Read more

Read other answers

I can sign into my Yahoo groups account but can only see the first page of groups (I belong to about 70 groups). When I click on "View all Groups" I get the following message:
"We're sorry, but we were unable to complete your request at this time.

If you continue to receive this error for more than 48 hours, please contact our Customer Support staff. We apologize for this inconvenience."

I have tried from various workststations(home and at work), made sure cookies were turned on, dropped the firewall, etc. I even went to the lost groups locator utility, no result.

Yahoo tech support does not respond, I have tried many times in the last two months (I got what I paid for).

Any ideas?

A:Yahoo groups error can't view all groups

it's Yahoo,

there tech support are disgusting, I had major problems with one of the groups I run and you camn log a call but dont expect an answer !

example of an OXYMORON

TEch Support
Customer services

Read other 1 answers

Dear all the helpers

Well, i've been having this problems for around 4 months already and i cannot figure out what's is wrong with my newly built PC.
PC info:
Pentium 4 3.2 GHz HyperThreading
Asus mobo PC480 Delux with free WI-FI antenna edition
HDD 200GB serial seagate
128MB Graphic card,WinFast A350XT
Monitor Samsung 173V

Windows XP Professional
Note: If you need more info about my PC please ask

Here're the problems:
- I don't what's wrong everytime that i touch something in the back of my System Units (all the ports and stuff) my PC just stop working by not sending any signal to the Monitor(blank with LED light flashing)
- Sometimes when i stand by the PC too long, say 4 or 5 hours then when i try to start up again it doesn't do so, again the same sign, the monitor is keep flashing its green light by not showing anything and the harddisk of the PC is not spinning anymore.
- Also the same thing happen when i run alot of applications(Like Norton Live Update, Signing in MSN, and a couple of Mozilla Windows) that use my Internet connection ( it's a LAN internet shared by Wireless switch outside my room).

Everytime that i have such kind of problems above when i try to boot my PC it doesn't boot (Means there's nothing comes up on the Monitor with flashing green light, HDD just run for a while then stop, and there's some wierd noise comes out of my Speakers as well it's like chinese or sth, wierd huh?
Wit... Read more

A:Help, PC is very sensitive

Read other 9 answers

Recently i have been having problems with my microphone as it is not sensitive enough. I was using astro a40s and they worked fine and everybody can hear me in discord but after those broke i have tried using razer, an beat headsets and they still can barely hear me in discord even though they said that they put me at 200% volume. I thought getting a newer headset (astro a50 gen 3) would fix it but it did not. My volume in recording devices is all the way up and my input device in discord is as well.

Read other answers

Stange isn't it. I post a question about an AOL problem, nobody answers it so I say I'm fed up with AOL and I'm going to dump it.
Suddenly, my post is no longer available and I'm not able to log in. Couldn't be because AOL doesn't want to hear the criticism could it?
As a "from the begining" AOL user, I'd still be marginally happy with it if any real help was available when they decide to change things that we don't want and don't work.
AOL has gone so far from it's original premise that it's no wonder it wouldn't work for Time Warner. In fact it's a wonder anybody is still sticking with it.
How about wising up and getting some real time help even for us "free" users? After all AOL was the one that wanted us to stop paying for their service.

A:AOL - a little sensitive?

Your other thread was deleted because you said your fix was to delete AOL - "Listen -- that sound you hear is AOL being flushed down the Computer Commode."

And your other comment led us to believe you had no further use for this forum - "Seems like this "help" forum is just as useless as AOL is."

AOL Support: http://help.aol.com/help/microsites/...904377A80BB756

Read other 1 answers

A window is maximized. When I click and hold the title bar and drag it a bit, the window resizes to a smaller window.

What Win7 feature is this?

Initially I had trouble with this. I know I wasn't double-clicking on the title bar for it to be resizing, but it was.

Interestingly, on Win7 Ult RC at home, I never noticed this happening, only on Win7 Ent at work.

A:Title bar too sensitive?

That is Aero Snap. Can be disabled. I love it, but it can be touchy.

Read other 9 answers

Hello, I would like to change the sensitivity settings of my touchpad, but nothing under control panel>mouse> device settings (nor anywhere else in the mouse options) shows up to adjust sensitivity. I am using windows 7 on a Samsung NP-R525 laptop computer which has synaptics pointing device 15.2.20 installed. Is there some sort of driver or something that would allow me to adjust the sensitivity?

A:touchpad sensitive

Just did a search and found this for you.
Drivers | Synaptics

Others were have the same problem and had good results.

Read other 4 answers

Hello Team,
When i am  checking the ata  report.
I found sensitive  users and senstive computer.
what is the difference between the sensitive user and normal user.
how to identify the deference's. ?

Read other answers

Hello everyone!

I am using my sister's notebook and having major issues with mouse sensitivity.

Windows XP on HP Compaq 6730s

The touchpad seems to be overly sensitive to the point where basically lightly grazing it will move the mouse. It also seems like the cursor jumps randomly making typing on this or even using it at all nearly impossible!

I have tried to check the settings in the control panel but I can only find settings for a regular mouse, nothing about touch sensitivity... unless i'm looking in the wrong place... would these kind of settings be found in Mouse or Keyboard settings in Control Panel? Or somewhere else?

I am wondering if it is a driver problem?

Any suggestions would be greatly appreciated. Even typing this paragraph has taken me too long and the cursor has jumped 7 times already


A:Mouse TOO sensitive

ok..... so i decided to go with my gut and update the driver AND IT WORKED but then i kept getting an error message saying there was an error and "send or do not send" to report problem.. i kept closing the error box and it would just pop back up... so then i tried updating the live updates, and when i rebooted there were no more pop up error messages...

i went into control panel and opened the mouse settings and it was ALL THERE, finally! so I changed the sensitivity and it seems to be working PERFECT now!!!

thanks for taking the time to read it, for those of you who did, and even tho i resolved the issue myself, i figured i should at least post the update on how i fixed it (in case anyone in the future stumbles upon this same issue)

Read other 2 answers

from truthisvirtue .. . I am now aware of the organization that has my computer monitored .. because I stood up & voice my specific opinion on issue's that are in my mind un-constitutional and of grave concern to all Americans.. NOW I am being monitored by .. ,(you may know who) ' is there any way what so ever to prevent the monitoring without being shut down.
XP Pro . 2002 version, Pack 3 , .. Pavilion...Pentium -Intel [R]...4CPU 2.53 GHZ & 512 MB of Ram

Their system is extremely advanced .. !!! "understatement !
I am only a concerned citizen .., one of many .. whom is in the same boat .. NO agendas or pretenses .. yet I am like many being now blatantly monitored .. is there hope and a way to at least get my Yahoo acct. back .. without being monitored .. Yahoo will NOT help .. they are part of the problem .
At this present time .. 8/31/10 I still have e-mail and IM capability ! BUT under a completely strange forum and a obvious mistake by the so called Institution that is monitoring me and who knows how many other American citizens ..allowed me to find out exactly whom they are .. maybe NOT a mistake on their part .. who knows ...?
IS there Help ? anyone .. Please

A:sensitive n Nature please help

It might be helpful if you would describe how you know you are being 'monitored'.

Read other 2 answers

What exactly does "case sensitive" mean?

A:Case Sensitive

Case sensitive means when your Caps Lock is turned on. The letters can be BIG, like that, or can be small. That is especially important when you're logging into an account. Don't turn Caps Lock on when you're typing in a password, but if you have capital letters in your password then using Caps Lock could help.

Read other 2 answers

I want to slow down my keyboard to be more like the
old-fashioned keyboards. I like to take my time.
Is there a way to do that?

Thank you, Mary
XP Home

A:Keyboard too sensitive

is this because you hold the key down to long it repeats - you can change that setting
control panel >keyboard> change the repeat speed and rate

Read other 3 answers

I recently upgraded a Dell Inspiron laptop to Win 7 from XP. Since then the computer has become possessed. Unintended programs open, text appears other programs, the cursor moves in unintended ways- such as from the end to the beginning of a line.

This is the second time I have written this post. The first time was interrupted by text suddenly appearing from an old email. None of this was experienced during years of using XP.

Can anyone explain this or offer a solution? I'd sure appreciate it!

A:Over sensitive interface

Did you install all of the Windows 7 drivers for your laptop, making sure the Chipset drivers were the first to be installed. What is the model of your laptop?

When you say 'Unintended programs open', do they just open when you aren't even touching your machine, or when you are typing something?

Read other 6 answers

Can somebody help me on this? My laptop mouse is messed-up and I plugged in a desktop mouse and the same thing is happening. The problem is, when I move my mouse arrow on a file or a folder, my mouse left-clicks on it all by itself without me pressing the left mouse button. There's times when I move my mouse arrow on a video file and I only move the mouse arrow over the video file, the next thing I know I have a Media Player loading up and playing the video when I never did that. can anyone help? Thanks.

A:My Mouse Is Too Sensitive Now

Hit start, type 'mouse' and hit Enter. See whether the settings are what you want.

Read other 3 answers

I am having a panic attack i need the computer for a online college course my computer is really screwed up every picture or letter is coming up as a weird cluster of letters like a square a triangle and a circle. I am also seeing pop-ups of some fake anti virus program called stopsign,cyberdefender and there may be others that I dont about please help. Again this is incredibly time sensitive i cant stress that enough immediate help will be rewarded with possible donation. Enclosed is my HJT log
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:47:32 PM, on 1/30/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16762)
Boot mode: Normal
Running processes:
c:\program files\common files\logitech\lvmvfm\LVPrcSrv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\system32\nvs... Read more


please i really need help i have an online college course that i need to attend

Read other 3 answers

Help!  I am new to the HP forums and really appreciate any help you can give me.  I have an issue with my HP  laptop and its built-in mouse pad.  This started after I upgraded to Windows 10.  Since then, out of nowhere a black BIng search screen will appear.  No joke - this happens at least 20-25 times an hour.  Plus, as I move the mouse around, the screen will zoom in or out.  My 2-window screen will divide into 4 or 8 screens, unwanted websites will appear, some of my folders will get moved into other folders, and several times my computer has rebooted to my surprise.  I know that i did not punch certain keys because I am a one-finger typist and I have to carefully watch what keys I hit.  The issue is in play whenever I am moving the mouse.  My frustration is slowly turning to anger.  I have checked very setting I have found and nothing fixes the problem.  PLEASE help me?
Thanks for any consideration
Bill Hart

Read other answers

I just bought Dell Desktop XPS 8300 system with 24 inch ST2420L Full HD LED Monitor.

The monitor is so sensitive that even just touching a folder opens it although I have selected double click to open in folder options.

It is same with menu bars & some files too. Drop down menus snap right back up.

Dell tech support spent an hour but couldn?t do anything.

I am using the Native Resolution of 1920X1080

It has NVIDIA GeDorce GT 530 Video Card & I installed the Latest drivers too.

I am using the DVI port for connection.

The system came with Win -7 Home Premium but I installed Win -7 ( Ultimate ) on it.

Any help will be much appreciated.

Thank You

Read other answers

I bought this microphone for recording audio to my computer. It seems extremely insensitive though. I have to literally press my lips against the microphone to get a decent volume, and that's even when the mic sensitivity is cranked all the way up on my audio program (audacity). I don't think it's the program's fault though, as I also tried it in Windows Sound Recorder to the same effect. Is there anything that can be done?

Oh, if it helps, I use an adapter to get the 1/4" plug into the 3.5 mm jack.

A:Microphone not sensitive enough!

Read other 7 answers

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Professional , 64 bit
Processor: AMD Athlon(tm) II X2 245 Processor, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 3838 Mb
Graphics Card: ATI Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 467548 MB, Free - 418674 MB;
Motherboard: Dell Inc., 04GJJT, A00 , ..CN70163016006W.
Antivirus: Microsoft Security Essentials, Updated and Enabled

In the last week I've added nothing to my computer but the left clicker on my mouse has become extremely sensitive. Most times when I try to click on anything whether it be in a free cell game or on excell it acts like I clicked two or three times. I've been to "mouse" on the control panel and moved the double click to the slowest setting but no help. Now before this I'd never been to the "mouse" on the control panel so I could not have accidently done anything.

Does anybody have any ideas. It's really hard to do anything since I've got to be so careful hitting the left clicker on the mouse!

Thanking you ahead of time.

A:mouse click too sensitive

Buy a new mouse.

Read other 3 answers

Dear Tech Guy(s):

I am running an HP Pavillion 6630, with WIN 98, Celeron Processor 500MHZ. CD-ROM 40X, CD-Burner HP8250I

I have been accessing a reference CD-ROM, which I own, that contains time sensitive technical data. Recently I have been LOCKED OUT, from accessing the data, and I would like to continue using it. I get a window telling me "The CD-ROM is dated May 2001 and you need to install an updated version."(Which I Don't Have)

I have tried completely uninstalling and reinstalling, the software, but this hasn't helped. I was also able to edit a couple of notepad files, on board the CD, entitled "Version" and "Volume", but that still didn't allow me access.

My Questions:
How can I continue to access this information? What files on board a CD of this nature, are usually responsible for allowing a computer, to identify its date? (The CD"s Date)

Any suggestions, or information on which files I need to access and edit will be greatly appreciated. Thank you!


A:Time Sensitive CD-ROM Material

Read other 16 answers

Ok so to start off my Model is T420 ok so this is my second gobi i've Might've ruined due to how sensitive the hardware is - ok so the history goes that i've instsalled windows 8 (iso provided from MS's secretive (idk if it is a secretive onedrive or not)one drive) and upgraded to 8.1 and it instaslled perfect with all drivers onboard from Lenovo System Updater Uitlity and after a fight with bluetooth not shutting down i've decied to go back to OEM system and the first thing i noticed when going to check in device manager(habbit) is Gobi 3000 not installing drivers with a code 10 so the question i ask... Is it possible that the transition from win 8 - 8.1 - back to OEM win 7 did something hardware wise to the gobi? also sorry if i spelled something wrong - that's what happens when you take 5MGx2 melatonin

A:Sensitive Gobi 3000? or ???

Ok so I found out that my gobi /3g module might be a windows 8/8.1 onesince the windows 7 version of the driver doesn't install the driver on windows 7 but the windows 8/8.1 version of the driver installs just fine on both windows 7 pro x64 and windows 8/8.1 pro x64and yes I've run the recovery dvd's a few times which is windows 7 pro and the gobi doesn't look to be installed when checking device manager Each of those times -I think someone might be handing out modified gobi 3000's or in short 3g module's to fit in on a certain driver made for another system instead of it's original system (it's what I think am not sure)so in short case closed.

Read other 1 answers

I am facing a strange problem, about a week ago my right click got well.. hypersensitive.

Sometimes when i click it once it turns out that it double clicks the right click and the other time i might send a right click and then a left click.

This gets really annoying, im afraid to right click links to open new tabs because i often end up left clicking the link aswell...

A:Right click hyper sensitive?

Go to Control Panel/Mouse You can change the double click speed. You can also go to the mouse manufacturers web site and see if there is a driver you can update.
All else fails, try a different mouse.

Read other 1 answers

I was with 3 for mobile phone, but I have moved to an area where the signal is very poor. It seemed that T-mobile would be better, so I ordered a SIM to test. Itís better, but the signal still yo-yos up and down: I get from zero to 4 bars on 2G. 3G only shows up sometimes, but often with no actual detectable signal Ė very unreliable.
BUT my phone is quite old and basic (Sony-Ericsson Z601i) and I want to get a Smartphone for the first time. Thinking about the Samsung Galaxy S2. My question is: is this likely to have a greater signal sensitivity than my old phone? Ė assuming I hold it right of course...I really want to upgrade and also to be able to use my phone where I live, but donít want to sign up for 24 months if it is going to be as unreliable. Orange network is no better where I am. Vodafone and Virgin are useless.

A:Are Smartphones more signal sensitive?

I was one of the very first to get an HTC Desire Smartphone in the UK (yes, I got it a 2 days before the official release date) Best gadget ever and does so many things. I'm on Vodafone network and don't have too many issues and I travel/drive about loads in the UK.

I think a lot of it has to do with atmospheric conditions when signal strength fluctuates. For instance, sometimes I can have no signal at all at home and the phone can be sitting in the exact same position, day in day out. Most of the time, it's a full bar. It really makes no sense why it fluctuates, when the phone can be in the same position all day. Once, I had a whole weekend with no signal and now learnt that switching it off and on again, corrects the problem and a full bar reappears when the signal vanishes for long stints like that. Not sure why this works but it does for me every time and it works on my dads phone as well when this happens. Go get your Smartphone, you'll not regret it.........awesome bits of Tech and I don't think they are any more sensitive than any other phone apart from the crappy iphone which I despise anyway, but that's another issue.

Read other 2 answers

I just received my Dell Inspiron 17R laptop with Windows 7.  I am loving the laptop, however, the keyboard seems extra sensitive to me.  In the middle of what I'm typing, the cursor will jump back a line or two and start inserting type there instead of where it was previously.  I thought I was maybe dragging my hand across the mouse window while typing to cause this, but I've been typing with my hands raised above this and it is still doing this.
Is this a defect or are these keyboards really just that sensitive?

A:Ultra Sensitive Keyboard!

I have the same problem.  Just started a day ago.  I thought it might be a virus, so I scanned everything and nothing was there.  Then I started searching for answers.  One other post said it has to do with a Dell upgrade.  If you find a solution, let me know! 

Read other 4 answers

Hello, I would like to know how I can rid my PC of specific data, permanently.

You see, I am in possession of some... sensitive material. Material that must not, under any circumstances, be discovered. What material is for me to know only. I'm sorry if this complicates things, but my mom will flog me if she finds this!

I have already stored the data on a flash drive and deleted all left overs I could find, but I know that there are still traces in my laptop.

How can I track down every little piece of leftovers and erase, shred and incinerate them permanently?

Help is greatly appreciated!

A:Sensitive Data Incineration

The only way to do it with any certainty is to wipe the drive clean and run a couple passes of 0's over the drivehttp://www.killdisk.com/http://www.dban.org/

Read other 7 answers


Since I've exchanged my MOBO from MSI B85-G43 to Gigabyte sniper Z87, my mouse (Roccat Savu) started to behave strangely. Sometimes, upon turning on the PC, the mouse gets SUPER sensitive. It literally flies around the screen with the smallest touch. Also, the mouse's LED stops working. What works is unplugging the mouse, and plugging it back in. It happens in all 2.0 and 3.0 ports. It doesn't occur every time, but it only happens after I power down the PC (by turning the PDU off). Which I sadly do every night, so I have to unplug my mouse pretty much every day. It doesn't happen on reset.

I've updated the Savu driver to the latest release.

The mobo is second hand, and it might have been sold because of this flaw (the price was low), but I fail to see how the USB port itself can cause this. Seems more like a software issue to me? It happened both on previous & new installation of Windows 10, which I had to reinstall due to mobo change (activation).

Any ideas? I'd rather not RMA the mobo because of something that insignificant, but it's strange. All other periphrals work just fine on the same mobo, same USB ports. On the other hand, this problem began after I swapped the mobo...

I've looked for new USB drivers for this mobo on Gigabyte site, but haven't found any.

Read other answers

Hello all, After successfully having someone solve my first problem with this laptop (involving a faulty fingerprint sensor), I have now decided to address the second, and hopefully final, issue I have been having. My microphone is not sensitive at all - however it is working and I am pretty sure it is a driver issue too. Let me explain. The microphone has always been quiet. One of the first things I did when I got this laptop last month was to Skype some friends, and they said I sounded extremely far away. I tried Skype's test call service and when speaking normally could only just hear my voice. I did a little bit of troubleshooting and even with mic sensitivity up to 100% and boost up to 30dB, I was still realistically unhearable. It got to the point where I tried uninstalling drivers, and I discovered that uninstalling my audio drivers caused the mic to suddenly work perfectly - however reinstalling them caused the fault to reoccur. I have reinstalled the drivers as I assume the Bang and Olufsen (Realtek) drivers are needed for high quality sound output or whatever - but I was wondering if there was a fix that would allow me to use the microphone with these drivers installed instead of having to uninstall them every time I want to use the mic? Note: the microphone still works, but is not very sensitive and I can only just be heard even when I'm shouting into my screeen! Thanks, Kyran Hill

... Read more

A:HP Envy 13 - Microphone not sensitive

Kelvin2 wrote:turn off sound effects for the Microphone Array. This is done by the Control Panel command ?sound?-> ?recording? tab -> select ''MICROPHONE ARRAY" and click on ?properties? ->on the ?microphone? pane select the ?enhancements? tab -> click the check box ?disable all sound effects? then click ?OK? on all of the panels back upto the sound panel. Tired and it fixed hopefully can help you guysGreat work Kelvin2! I also made sure that "Microphone Array" was set as the default recording device too - and with your help it now seems to be working brilliantly! That said, this problem has a track record of coming back but hopefully it's fixed  Thanks again, Kyran

Read other 10 answers

On my labtop one of the keys(m button) are to sensitive, when i like rest my finger over it(VERY LIGHTLY) it would just spam out "mmmmmmmmmmmmm"

I would like to know how to fix this.
Im using a Vista labtop. With Vista settings.

A:Laptop button too sensitive

I'm on XP right now, so I don't know the exact place of things in Vista. But in control panel, classic view, you should have an entry related to the keyboard.
When you enter it, you should be able to adjust the repeat delay and the repeat rate.

Read other 4 answers

Thanks for help in advance.
I am using Windows Vista on a Toshiba Satellite

My mouse is so sensitive that when I am working in Explorer I cannot avoid dragging and/or opening files. I use gmail and the only changes that I have made that I can recall was to add some gadgets in that program.

This problem is so bad that it is fouling up my filing system and causing me to lose files.


A:Mouse action too sensitive

Hi and welcome to TSF go to control panel and in classic view mouse,pointer options and check the enhanced pointer precision check box

Read other 3 answers

Hi guys.
So recently I built my first pc, and had tons of issues which I have fixed by now.
However there is still one, mighty annoying issue that I still have; its that my pc is either turning off randomly (my cpu and gpu temperature's are fine) or its turning off because something is touched on my pc. I for example touched my pci wifi adapter from the outside, it instantly turned off. Tried it with the GPU, it instantly turned off. So I figured: that's ok, I'll just close the case and place it where it needs to be and not touch it. However it appears even if a wire is touched, or heck even if a piece of dust (or whatever) gets inside my pc and touches a piece of hardware my pc shuts off. Either that or like I said: its something completely random.

So my question is: is there a way to fix this? I mean this issue is extremely annoying as I'm trying to play games and keep on having to turn my pc on again because it shut off. This doesn't only happen during gaming either by the way.

My pc specs are:
asus m5a78l-m/usb3
NZXT source 210 Elite
R9 380
FX 8320 3.5 ghz (I'm not OCing this, ever.)
EVGA 600W Bronze PSU.
Seagate 1TB HDD

A:PC is extremely sensitive to touch?

Hello Quinn0909 and Welcome to PCHF

Are you sure there is no issue with grounding?
The fact that just by touching the system you cause it to turn off is suggestive of a short.

If I faced such an issue I would disassemble and reassemble the system to make sure.

Read other 5 answers

Me being an artist requires me to use a pressure sensitive tablet to work on Photoshop. Whenever I try to use a Pen Pressure option, it tell me that I will be needing a Pressure sensitive tablet, making me wonder if mine is not one. Is there a way to check?

And if mine is not, is there a way to make it into one via downloading any type of programs? I do not wish to spend cash anymore to re-purchase another one.

Info of my Table:
Windows XP
Tablet PC edition 2005
Version 2002
Service Pack 2

Mobile Intel(R) Pentium(R)
lll CPU - M

Help will be GREATLY appreciated

Read other answers

Hello,I have problem with airplane button. I need to disable it. Button is too much sensitive. If I touch it with feather it gona activate and break my connection. This is big problem for me since I need stable connecion and button is soo close "backspace" and "=" buttons which I use offten. Did anyone know how I can disable airplane button so it will not activate at all. I don't have any use of it and I don't want to cut it out.Thanks.

Read other answers

I have a Dell Inspiron 3532 with touch screen capabilities and I am wondering if there is a pressure sensitive stylus that will work with it. I don't want to use a captive stylus because those dont have the same capabilities for making digital artwork. 
Thank you in advance! 

A:Pressure Sensitive Stylus?

Not with this model, no.  There is a major difference between a touchscreen and a tablet-style screen with a digitizer  - you have the former, not the latter.
There are not that many 15" and larger systems with digitizer screens - even the 12-14" units that have these start just south of $1,000 -- most are over that price.  You won't find that feature in a budget-level notebook like your 3532.

Read other 1 answers

okay my girlfriends grans laptop's power socket was loose so i opened it up stripped out the Motherboard and re-soldered the connections on it, upon re assembling the laptop i find that now the screen wont go on, i have tried connecting it to a monitor but all that results from that is a blank green screen.
everything else appears to be working just looking for any reasons why this would happen. oh and i was grounded by a static rist strap as i worked on it.

quick responses would be very much appreciated

A:Please Help time sensitive problem


Read other 1 answers

About three days ago my mouse started to become too sensitive - It's hard to single click on things, and using the Back button is almost impossible. As far as I know, I haven't changed any settings. Tried doing a System Restore to a known good point with no success. It's a PC with Windows XP and I'm using a Logitech LX-3 corded mouse. Any suggestions appreciated.

A:Solved: Over-sensitive mouse

Read other 8 answers

Hi Everyone,

A person that I know has some information about one of my friends that he shouldn't have and it is quite personal and sensitive data. I have asked him to delete it but he refuses . Is there any way that you know of that I could remove this data? I thought of using a batch file, but he is quite technically literate and wouldn't run it. I don't know of any other ways though I am sure that there are. I'd appreciate some help on this one.



A:Removal of Sensitive Data

Hello Richard.

I dont think we can help with this sorry.

Read other 3 answers


I have recently migrated to Windows 7 and found that help file was not supported here.
I have an application where on F1 press, i used to display MyApp.hlp as the help file. After some investigation, i realized and convertedthis MyApp.hlp to MyApp.chm format. I also used ::HtmlHelp() to call this help file. Here is the code snippet that i used to display MyApp.chm:

::HtmlHelp(0, m_pszHelpFilePath, HH_DISPLAY_TOC, NULL) ;

But, here i found that i am not able to display help according to my context.
In many places in my application i had set the Help IDs of different dialogs like:

Now i am not sure how to use these HelpIDs for context sensitive help.
I have tried passing "HH_HELP_CONTEXT", "HH_TP_HELP_CONTEXTMENU" but couldnt seem to get this right.

Can anyone please help me?

A:Context sensitive help is not working

on the start menu index you have HELP AND SUPPORT hope this helps

Read other 4 answers

I've got an ASUS laptop pc that runs Windows 7. Alot of times when I'm typing, if my hand or thumb even lightly brushes up against the touchpad accidentally, I'll lose a whole page of text that I've just typed or (worse) cause an email that I'm still composing to go ahead and be sent.

I did a search and appear to have the most recent touchpad software for this brand. I do need touchpad capability, but is there any way I can adjust the sensitivity? There are websites that give instructions on this but they appear to be for older models; at least it didn't work for me.

A:hyper-sensitive touchpad?

Read other 6 answers

A curious question.
I would like to have VLOOKUP case sensitive.

Let's say that on sheet2, I have a list of names: "Bev", "BEV", "BeV", "bev" beginning columnA, row2, and quantities of "12", "2", "5", "6" in columnB. I have that range defined as "NameBev", $A$2:$B$5.

On sheet1, I want to add a list of names in columnA, "BeV", "BEV", etc., and in columnB, I want VLOOKUP which will pick up the appropriate value for the name in columnA.

"=VLOOKUP(A1,NameBev,2,0)" will pick up the first value in the table. I can change the name, but it will continue to pick up only the first value. Have tried a couple of things such as &A1&, with and without ", as well as other iterations, but can't seem to get it done.

Have also tried:
IF(EXACT(A6,VLOOKUP(A6,NameBob,1,FALSE))=TRUE,VLOOKUP(A6,NameBob,2,FALSE),"No exact match")


NOT a top priority!

A:Case Sensitive VLOOKUP

Hi Dick. VLOOKUP is not case-sensitive, as Help says. Some functions are (eg: EXACT, or FIND/SEARCH (one is, one isn't ; can't remember which way round)). I don't know if you could work something with them, personally I'd go for code instead.

For Each Cell In Selection
If InStr(1, Range("D1"), Cell) <> 0 Then
Range("D2") = Cell.Offset(0, 1)
End If
Next Cell


Read other 2 answers

You hear all the time that the build up of static electricity from your body could short the components on the mobo. I know if you ground yourself you greatly reduce this risk but I was just wondering where the sensitive parts on your mobo were? Just any exposed metal part? Is the entire back of the motherboard sensitive? should you avoid touching the back at all? If so, how do you pick up and install your mobo?

A:Where are the sensitive parts on mobo?

All parts on mobo are joined somewhere, so discharging your static on any place will be bad.

Just watch out for the capacitors and any spikey exposed bits, and yes the back.

Pick it up from the sides, like a CD.

Read other 9 answers

some program has downloaded itself on my computer and restricts me from using programs on it. it says that they are all infected (even task manager) i have Norton internet security on it, but it hasn't detected anything. the name of this program is WINDOWS ANTI-VIRUS. i have tried a PC RESTORE but it didn't work, it said i had to schedule a disk check and it would begin on start up but the program again said even that was infected and so it did not open. Please help i have very sensitive information that i cannot loose. Thank you
windows vista
dell studio xps

A:Sensitive information in danger


Sorry for delayed response. Forums have been really busy. If you still need help with this do following, please.

Please download exeHelper to your desktop.
Double-click on exeHelper.com to run the fix.
A black window should pop up, press any key to close once the fix is completed.
Post the contents of log.txt (Will be created in the directory where you ran exeHelper.com)
Note: If the window shows a message that says Error deleting file, please re-run the program before posting a log - and post the two logs together (they will both be in the one file).


Download DDS and save it to your desktop from here or here or here.
Disable any script blocker, and then double click dds file to run the tool.
When done, DDS will open two (2) logs:

Save both reports to your desktop. Post them back to your topic.


Read other 1 answers

Hi all-

We have some information that we want to provide employees on a monthly basis that is of a rather sensitive nature. We want to be able to present this information to employees somehow without allowing them to print, copy, save or e-mail the page. I know with PDF you can lock it down so they cannont print or copy, but the Save functionality is still there as well as e-mail. Are there any programs that can be used to lock down documents in this fashion? We had been considering sending the information as an attachment in an e-mail but there does not seem to be any way to stop them from saving the attachment or forwarding it outside the company. We have considered setting up a link on our corporate intranet site as well but want to be able to lock down the documents still.

Any suggestions would be wonderful!

Thanks in advance!!!

A:Protecting sensitive information

If you find out, let me know

Read other 1 answers

Hello everyone,

The problem is we run spare-parts programs on our computers that have a date lock on them, after approx. six months from issue they shut down which can be a real pain, especially as we often need info from older machines in the database. So far the only way we've found to overcome it is to reset the computer date, but as you know this upsets a whole load of other settings, not least the e-mails.

Is there a standard file in the imported program that's set to count down the dates that we can insert a 'patch' in to?
look forward to your replies

many thanks

A:Date Sensitive Programs


I presume the date lock is included in the application for a reason. What you are asking for is seems to be in violation of the BC Forum Rules:"No subject matter will be allowed whose purpose is to defeat existing copyright or security measures."

I would think that a better means of avoiding this recurring problem would be to use a spreadsheet or database application that would not be subject to any time interruption. I am sure you could find someone to prepare either for a very reasonable sum.

This topic is closed.
Global Moderator

Read other 1 answers