Over 1 million tech questions and answers.

point-to-point link for thousands of kilometers possibility

Q: point-to-point link for thousands of kilometers possibility

“Computer Networks” book by ANDREW S. TANENBAUM Ed4th Article 5.5.2 How Networks Can be Connected page 421 (Figure 5-44) he says:

“------Now let us consider the same situation but with two Ethernets connected by a pair of routers instead of a switch. The routers are connected by a point-to-point, possibly a leased line thousands of kilometers long.”.

Here he mentioned physical leased (dedicated) line.

Is practically (real life) this line available for thousand of kilometers ?

RELEVANCY SCORE 200
Preferred Solution: point-to-point link for thousands of kilometers possibility

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: point-to-point link for thousands of kilometers possibility

Read other 16 answers
RELEVANCY SCORE 93.6

I uninstalled ZoneAlarm Firewalla and now strange things happens...............

rundll32.exe - Entry point not found
The procedure entry point LdrResfindResource could not be located in the dynamic link library ntdll.dll

Whenever i log in to windows i get

userinit rundll32.exe - Entry point not found
The procedure entry point LdrResfindResource could not be located in the dynamic link library ntdll.dll

winlogon rundll32.exe - Entry point not found
The procedure entry point LdrResfindResource could not be located in the dynamic link library ntdll.dll
When i right click "MY PC" i get
rundll32.exe - Entry point not found
The procedure entry point LdrResfindResource could not be located in the dynamic link library ntdll.dll

I tried sfc /scannow without any success :/

A:rundll32.exe - Entry point not found The procedure entry point LdrResfindResource could not be located in the dynamic link libr...

You currently have an open Malware Removal Logs citing same issue, http://www.bleepingcomputer.com/forums/topic473316.html .

Since you have the open malware topic, we request that you pursue that and resolve any/all issues there...before proceeding with a topic in a different forum, citing the same issues.

At the conclusion/resolution of your MRL topic...you should then initiate a topic in the appropriate forum for any system issues that you may then have.

To avoid confusion, this topic is now closed.

Louis

Read other 1 answers
RELEVANCY SCORE 87.6

While preparing Win 8.1 laptop to be upgraded to Windows 10, I ran Rkill and found several issues
1) The folder C:\WINDOWS\Temp\46fed246-a20b-47f0-ae81-4936b8513516\Program Files\Common Files\Microsoft Shared\ink\en-us
contains thousands of entries which are Reparse Point/Junctions with <Unknown Target>.
As these are all temp files, can I SAFELY delete the folder?
 
2) SFC /scannow in safe mode found errors and has not been able to fix some of them (definitively related to the above)
C:\Windows\WinSxS\Temp\PendingRenames
8986 items
C:\Windows\WinSxS\Temp\PendingDeletes
6 items
 
I was unable to find sfcdetails.txt even with show hidden files.folders and show protected operating system files.
 
If it is safe to delete the temp files above, will I be able to upgrade to Windows 10 smoothly?
 
Thank you for your suggestions

A:Rkill finds thousands of Reparse Point/Junctions <Unknown Target>

Temp files can be removed. Please download Temp File Cleaner by Old Timer and save it to your desktop. 1. Save any unsaved work. (TFC will close ALL open programs including your browser!) 2. Double-click on TFC.exe to run it.  3. Click the Start button to begin the cleaning process and let it run uninterrupted to completion.  4.  After Temp Flie Cleaner has run, click on Exit.   Do the following to repair the corrupt files.  After you have done this run the sfc /scannow to make sure the files have been repaired. Press the Windows key and the X key, in the menu that opens click or tap on Command Prompt (Admin).  This will open the Elevated Command prompt. Copy and paste the command below, then press Enter. dism /online /cleanup-image /restorehealth Restart the computer to complete the repair.  If you have problems with your current operating system these problems could have an effect on your upgrade, depending of the problem.

Read other 29 answers
RELEVANCY SCORE 78.8

Because windows 7 is getting really slow, I decided to start fresh with it. Going into system restore, I find the original restore point. As I click on it, it says the file is not found. My "backup recovery" drive is a partitioned C drive. Could I find this file? Or Could I somehow format my harddrive or reset to factory defaults or anything to start fresh?

Compaq Presario CQ61-420US notebbook
Windows 7 Home Premium SP1 64 bit
3 GB ram
Amd Athlon II Dual Core M320

A:Restoring windows to original point, can't find restore point

Back up any important files that you want to keep first.
Use an External drive, flash drive or CD/DVD.






Quote:
Restore the PC to its original condition using the f11 key if Windows 7 is not accessible
Restore the PC to its original condition with the HP Recovery Manager from within Windows 7







Quote:
Create a set of operating system recovery discs

You can use HP Recovery Manager to create a personal set of recovery discs. When you select the Recovery disc creation process, the HP Recovery Manager examines the PC and determines how many blank DVD discs will be required. Depending on the model, you will need up to three DVD-R or DVD+R (Non-read/writeable) discs. The creation process can take up to an hour or more. Do not interrupt the creation process.


Recover Windows 7 Operating System Using HP Recovery Compaq Presario CQ61-420US Notebook PC - HP Customer Care (United States - English)

Post back if any questions, plus let us know how it's going.

Read other 9 answers
RELEVANCY SCORE 78.8

Greetings all,

Location-A:
OS: XP Pro
CPU: Intel P4/3.0GHz
Memory: 1.0GB DDR 3200
HDD: 120GB
PC Type: Generic
Connection: ADSL 3.0Mbps/375Kbps
Router: LinkSys Model#: BEFSR41
Location-B:
OS: XP Pro
CPU: 3.0GHz
Memory: 1.0GB DDR 3200
HDD: 120GB
Connection: ADSL 3.0Mbps/375Kbps
Connecting Device: LinkSys Model#: BEFSR41

Would like to connect the two locations and share resources.
I there an way to accomplish this without additional hardware/software ?

Thanks for your help

X-PC
 

A:Solved: How Connect two locations 120Miles apart using Point-to-Point Protocol

Read other 8 answers
RELEVANCY SCORE 78

I'm working on creating a point-to-point wireless network between my computer store and a car wash I own that's about 1 /4 mile away. I thought I might start a thread to share the progress along the way.

The goal is to be able to provide Internet service for credit card payments as well as security camera monitoring. I'm hopeful that the connection will be stable and low latency enough to also allow for VOIP.





Next door to the computer store is a home that was once owned by the local ambulance squad. They've got a tall tower still there that is no longer in use. We've made arrangements to be able to put a Ubiquiti Nanobeam on it, which will have a clear line-of-sight to the car wash. We got a tower that was once used by a home to receive TV signals and put it up at the car wash. On Monday, I got up in the bucket truck and mounted the Nanobeam there. (Photos below.) We still need to run conduit and cables to the tower on the computer store side and then climb that tower (as the bucket truck won't reach). It should be fun! I don't think that'll get done next week, but hopefully the week after.






 

Read other answers
RELEVANCY SCORE 76.4

HI ,i have a home pc with adsl,this program i hear about,does anybody know the pro's and con's about it,do i need it or should i just keep the software my provider issued me.What would this program do for me if i was to use it..Thank's in advance for all replies.
pppoe or raspppoe
 

A:pppoe(point to point protocol over ethernet

Im not familliar with raspppoe.. but after reading some info about it.
I'll just stay with pppoe, same results anyway
 

Read other 2 answers
RELEVANCY SCORE 76.4

Howdy,

It has been a while since I last posted. I am trying to help out a reporter with a story on networking and I would like to get this group's thoughts on the topic below:

Cabling: Structured vs. Point-To-Point
When it comes to data center cabling, there are two primary options: structured and point-to-point. This article should look at the pros and cons of both, how they differ, etc. When and where is one option a better fit over the other? How does the cabling option chosen affect overall data center flexibility, performance, and future-proofing?

Any or all comments would be greatly appreciated. Thanks!

JR
 

Read other answers
RELEVANCY SCORE 76

Hi guys, this is my first post so be gentle and talk slow please...

I've got the BT HH4 set up as the main router in my house but because it "has" to be plugged into the Master Socket its currently tucked away in the loft upstairs and the WiFi signal downstairs is really struggling because of it... So I decided to stick my neck out and install an access point downstairs as the house is cabled up! The one I've gone for is the 'TP-Link TL-WA901ND' which I checked was pretty good and would do the job for me, however before it's arrived I found out that I COULD have just used the old HH3 instead?!

So here's my question, does anyone know which device would be better as a Wireless Access Point downstairs..? Either the BT Home Hub 3 or the TP-Link TL-WA901ND (Advanced 300Mbps Wireless N Access Point).

Any help would be appreciated, I just want to see if it's worth me sending the TP Link back if the HH3 does a better job..!

Many thanks in advance =D
 

A:BT HH3 or TP-Link TL-WA901ND as Wireless Access Point??

i would suggest you try the HH3 and see how it works for you.

Its difficult to advise, because the construction of the house and layout has a lot to do with how the wireless signal performs , also the interference from other wireless signals , if there are a lot in the area , can impact the quality.
 

Read other 1 answers
RELEVANCY SCORE 76

Hello, i really hope someone can help me. I just purchased this unit new, i tried calling there support and there english is so bad i could not talk with them.

I have a verizon mifi 2200 wireless interent i guess you would call it a hotspot but its only wireless.
You cannot hook up any computer to it via etherent.

This unit i bought has the ability to do it but i cannot figure out how.
I can get into the setup and there are many possibilities to configure it buy im really not even sure which one?

client mode
bridge with ap mode
repeater mode

My verizon mifi 2200
i can get into the setup here easily as well

i have the network name, mode is 802.11, security none, authenication open access
under the lan setup i can see the ip address, subnet mask, mac address, dhco range
Im quite capable of getting this setup but need a little help the the right direction

Thank You!
 

A:help with tp-link tl-wa701nd wireless access point

Client mode will allow you to connect the TP-Link to the MiFi wirelessly, then plug PCs into the TP-Link access point.
 

Read other 1 answers
RELEVANCY SCORE 76

Hi,

My home network consists of 8 PCs, a PVR, an IP Camera, a PS3, a Wii and a network printer. My sons also have iPods they want to connect wirelessly.

My internet connection is cable which connects to a Netgear WNR3500 wireless gigabit router. This is cabled to a DLink 1016D 16 port gigabit switch.

Wireless is enabled on the WNR3500 and the iPods connect fine within a 25-30 foot radius of the router. The PS3 only got a 35-45% signal from 15 feet away so I cabled it. The other end of the house is 60 feet away.

At the other end of the house I have a PC and a PVR connected to a DLINK DGS1008D 8 port gigabit switch.

I purchased a TP-LINK TL-WA601G access point from a computer store who told me this would enable me to have the wireless devices to access the network from that end of the house.

But I can't get it working. I have the same SSID on both wireless routers. I have the TP-Link set to access point mode, and plugged into the switch. The WNR3500 is 192.168.1.250 and the TP-Link is 192.168.1.254. When I look at connected devices on the WNR3500 I do not see the TP-LINK.

Can someone please provide guidance as to how I extend my wireless capabilities to the far end of the house. Sorry for being a noob.

thanks

A:Correct mode for TP-Link access point?

The simple answer is that the store guy gave me a bum steer.

The correct answer is that the TP-Link had to be configured as a repeater, and the MAC address of the WNR3500 added.

On the Netgear WNR3500 I had to enable the wireless repeater and set it as a repeater base station then add the MAC address of the TP-LINK.

Thanks for your assistance.

Read other 3 answers
RELEVANCY SCORE 76

Hi

Hopefully quite a simple question, although I may be wrong! I have a spare router, a D-Link DSL-2640R that I would like to set up as a wireless access point. The reason is, I am currently residing in student accommodation, where the only source for internet access is wired ethernet ports in the bedroom walls.

Obviously the standard setup of the router wont allow me to broadcast this connection wirelessly, as it requires a phone line, however I have been told a "Wireless Access Point" would allow me to connect with various devices (Xbox 360, Laptop, iPhone etc.) without switching ethernet cables around all the time.

I have been trying to make do with ICS on my Windows laptop, however this doesn't seem to work with Xbox Live.

I have a good knowledge of computing just fall short when it comes to networking. Any help or guides would be great.

Thanks
 

A:[D-Link DSL-2640R] Setting up as Access Point?

Read other 7 answers
RELEVANCY SCORE 76

I've a Pirelli modem-router and I'd like to connect a D-Link dwl-2100ap as access point (operation mode= access point).

Details:
I connected 2100ap to Pirelli through an ethernet cable
2100ap has a dynamic ip provided by Pirelli's dhcp
Pirelli and D-Link 2100ap have same SSID, same encryption (wpa) and same pw but, probably, different channel (both on "auto channel scan").
With a notebook on the wan I can ping the 2100ap, I can access to its setting pages but if I go close to it (far away from Pirelli) I don't see any network with the notebook, in other words the D-Link doesn't work as access point.

Am I missing something ?
 

Read other answers
RELEVANCY SCORE 76

Hello.

We are currently upgrading our wifi technology at work. As a result I have obtained an access point that was used in the network no longer needed. I would like to install this in my home in order to boost the signal and range.

The access point is a D-Link DWL-8610AP. I have no CD-ROM or manual however I have looked at a few videos online. The problem I have at the moment is that I cannot seem to get into the Access point user interface to make any changes.

I have connected the access point my laptop using an ethernet cable. There are 2 ports on the access point: a LAN port and a console port. I have tried both.
Next I have opened a browser and typed 192.168.0.50 into the address bar which I acquired from an online manual and video. However, this just returns a search list when I expected a window requesting the login details for the access point. I can't seem to get any further.

I have almost zero experience of networking so any help will be greatly appreciated.

Thanks
 

Read other answers
RELEVANCY SCORE 76

I have a Draytek Vigor 2820 ADSL Modem Router supplying my internet connection to my home network with both wired and wireless devices connected to it.

To extend the wireless range of my network I purchased a TP-Link TL-WA701ND.

I am using the TL-WA701ND in universal repeater mode, connected to my Draytek wirelessly and using the MAC address of the Draytek. I have also set my Draytek to operate in bridge mode using the MAC address of the
TL-WA701ND.

I can get internet services and email through the TL-WA701ND wirelessly without problem.

My problem is that I CANNOT access file sharing or iTunes home sharing services through the TL-WA701ND. I cannot see any of my computers connected to the draytek router. However I can see computers
connected to the TL-WA701ND from other computers connected to the Draytek Router.

I have tried switching the TL-WA701ND to Repeater mode with WDS activated on the Draytek router and I lose my network connection completely from the TL-WA701ND.

A wired option is not an option, as this is a set-up between two houses.

I have searched the internet and TP-Link site for support on this matter and have found nothing.

Any ideas.

Thanks, Max.
 

Read other answers
RELEVANCY SCORE 75.2

Hi,

i have setup a DIR600 router as a wireless access point and configured it to take IP address automatically by contacting the DHCP server.
when it reloaded, it takes my domain controllers (My DHCP server) ip address as its address while creating IP address conflict with the server. when i check the dhcp server, sometimes its hostname comes under the address leases and sometime not comming.

my server's host name goes as "server.xxxx.com" and access points host name is mention as "dir600.server.xxxx.com" in the DHCP leases section.

can anybody help me to avoid the router taking the server address? (server address has statically configured)
 

A:D-link DIR600 wireless access point problem

i have setup a DIR600 router as a wireless access point ...Click to expand...

Is that a feature of the router, or you have configured it by the method that works for all routers?

... configured it to take IP address automatically by contacting the DHCP server.Click to expand...

In access point mode? That's extremely strange. And, assuming that's possible, why?

when it reloaded ...Click to expand...

Meaning of "reloaded"?

... it takes my domain controllers (My DHCP server) ip address as its address while creating IP address conflict with the server.Click to expand...

That implies a problem with the server--somehow you have it configured to have its own address in the Dhcp server's address range.
 

Read other 1 answers
RELEVANCY SCORE 75.2

Tp-Link supply an IP address to bring up a Dialog Box to allow you to log in and configure this device online, it is 192.168.1.254. But it does not work, when typed into the browser it will not connect to the site and allow configuration of the unit.
I am trying to configure it as a universal repeater from a wireless network, that I have permission to use, to my laptop to improve reception. (only have 2 bars at present)
Can this access point be configured be configured any other way, I have an Ethernet cable with it, or is there a way of sorting the problem. TP-Link have no idea. I have now spent 10-15 hrs on the problem.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1976 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 796 Mb
Hard Drives: C: Total - 228471 MB, Free - 110363 MB;
Motherboard: Acer , CathedralPeak , Rev , LXATR0X18584110D0B2000
Antivirus: AVG Anti-Virus, Updated and Enabled
 

A:TP-Link TL-WA701ND Access Point configuration problem

Generally speaking, there's a limited number of ways to access a router's configuration utility. Some will have an access port on the back of the router; but with the typical home-type router, you would utilize the web-browser method. Sometimes this is with a name like 'tp-linkrouterconfig' (or something to that effect), but more often than not it's via a specific IP address as you show above. Some routers will allow configuration through the wireless connection(s), but some specifically require you to be wired directly to the router.

Either way, you will have to be connected directly through that particular router, not through a different one. (eg - You shouldn't be able to access the TP-Link config utility while you're plugged into the other one across the way, or while accessing through another router's wireless connection)

Now, if you're trying to:

... configure this device online ...Click to expand...

Unless you're simply trying to state that you'd use your Web Browser to do so, then there's NO WAY you're going to configure your home router from outside the home network.
 

Read other 2 answers
RELEVANCY SCORE 75.2

hi guys,

had a problem in the office with my broadband router, so i replaced it
the office is working fine with a sbs2003 server domain
i have an ethernet cable running down to my house which always worked
then with the router change it didnt, my friend set it up years ago and i didnt see how he set it up
but i didnt know the password, neither does he
so i reset it and set it up from scratch
my apple ipad and desktop and another laptop connect fine
but my hp 6735s vista laptop just wont connect
it tries to connect and just says the laptop is taking an unusually long time to connect then fails

the network card is a broadcom 802.11 b/g wlan adapter and the tp-link is a TL-WA601G

i have changed channels
turned off encryption
reinstalled the network card
reset the tcp-ip stack
but cant get it working

yet it connected first time to my wimax router...strange
the weird thing is when i was trying to access the router before the reset it seemed to be using ip6 addressing...
yet in the router i cant see anything to do with ip6 addressing
the server in the office is dhcp server and the addresses are 192.168.10.x
as i said other laptops etc are working in the house

i even looked for firmware updates for this device but cant see anything
any help or ideas greatly appreciated
PK
 

A:cant connect hp vista machine to tp-link access point

Read other 8 answers
RELEVANCY SCORE 74.4

Hi guys and gals!
Im in abit of trouble trying to setup a wireless network. Part of the problem is that I am many miles away and I've never setup a wifi-netork involving more than one device, that device being a router.

I've attached a jpg which should explain the basics of the problem. This is what I've done so far:

I connected the TL-WA901ND to the router(a Thomson tg787) located in the house, this router couldn't be used simply because the SSID and its password is locked, and we sometimes have people renting the bottom floor and we would prefer a better SSID and a changable password for the network. The first TL-WA901ND(will call this one TL1(AP) from now on, the other being TL2(RP)) is set to operate as Access Point, having a different SSID and password for the network, and it works great. However, when I try to set the other one, TL2(RP) to repeater mode, with the TL1(AP) and that SSID/MAC as "target", it doesn't seem to work. I've tried using bot the repeater mode and the universal repeater mode but none of them seem to do the job.
Is is possible to repeat the signal of an access point or does it have to be a router?
The SSID and the WPAkey of the repeater is set to the same as the access point, is that correct?
The access point is not the one handing out IP-addresses, the router is still acting as the DHCP-server, is that correct?
Are there any other setups using these devices that could achieve the same thing?, using some k... Read more

A:Using a repeater to extend the signal of an Access Point, both a TP-Link TL-WA901ND

I've never set up a Repeater, so blind leading the blind may not help much.

Is is possible to repeat the signal of an access point or does it have to be a router?Click to expand...

Depends on the Repeater and Access Point. I didn't check the manual, but I would expect that two of the same device would play nice together.

The SSID and the WPAkey of the repeater is set to the same as the access point, is that correct?Click to expand...

To my surprise I learned recently that the Repeater (at least some of them) can broadcast a different SSID. But certainly you have to specify that of the Access Point in order to make the connection between them. I'd get it working w/o encryption first. In some cases you have to specify the MAC Address of the other device--again, I did not check the manual for your units.

The access point is not the one handing out IP-addresses, the router is still acting as the DHCP-server, is that correct?Click to expand...

Yes, definitely.
 

Read other 1 answers
RELEVANCY SCORE 74.4

Hi,

I have a program that is problem opening/running, (all other application are working well)

I am getting this message, please look at the image,

I searched on internet but not getting any solutions,

I have Windows XP SP3

I tried regsvr32 C:\Program Files\AmiBroker/cooltool.dll

message was

"Load library ..... the specified module can not be found.:
 

A:Entry Point Not Found ...could not be located in dynamic link library

Search the hard drive for cooltool.dll. Most of the time the DLL files are in c:\windows\system32.

If its missing you can possibly take it off the original CD
 

Read other 1 answers
RELEVANCY SCORE 74.4

Guys, I am having a hard time configuring my Access point. I have a DSL Router connected to our telephone line and it works fine wirelessly, Yesterday I purchased TP LINK Router to configure as Access Point to extend wireless signal up to the second floor. Now, I am wondering, should I do some re-configuration on my DSL Router before configuring my TP Link Router? Guys, Please share your thoughts and if you have knowledge on how to configure my 2nd Router to my Wifi Networks that will help.
NOTE: I followed the user guide manual that came with my TP LINK router but it is no USE. I just need to know if should I reconfigure my 1st Router in order to communicate with my 2nd Router.

Thanks,

A:How To CONFIGURE TP LINK ROUTER as ACCESS POINT in an existing network

How are you connecting the two routers together?

An access point needs to have a static IP, and it needs to be outside of the DHCP range that your router is using. For example, if your router assigns IP addresses from 192.168.1.150 to 192.168.1.200, you need to have the access point IP address below 150 or above 200. I like to keep the access points close to the router, so I usually use 192.168.1.10 for the first access point.

What model router did you buy? TP Link makes a few, and knowing the exact model will help us help you.

Read other 4 answers
RELEVANCY SCORE 74.4

Hello, I am having a "Entry Point Not Found The procedure entry point "dmAPP_isUnlockedVIDPID" could not be located in the dynamic link library dmBackup.dll problem. When I try to open files on my SanDisk USB 8GB flash drive. This started the last time I exited the disk and believe I didn't right-click hardware device and click eject. No when I plug it in, I get the msg. Any ideas on how to fine the entry point again? Thanks in advance, PC.

A:Entry Point Not Found in the dynamic link library dmBackup.dll

Hello, I am having a "Entry Point Not Found The procedure entry point "dmAPP_isUnlockedVIDPID" could not be located in the dynamic link library dmBackup.dll problem. When I try to open files on my SanDisk USB 8GB flash drive. This started the last time I exited the disk and believe I didn't right-click hardware device and click eject. No when I plug it in, I get the msg. Any ideas on how to fine the entry point again? Thanks in advance, PC.Did you enable the Sandisk 'Secure Access' app? If so, you might need a new VID/PID (Vendor ID) if you corrupted the existing one. You can post a request on their forum @ Sandisk USB Flash Drives forum

Read other 2 answers
RELEVANCY SCORE 73.6

Every time I load a data CD on the PC I get the error-"The procedure entry point" (different procedure e.g. "ndPaint") "could not be located in the dynamic link library " (different .dll filename e.g. "USER32.dll"). Virus scan comes back clear..Spybot clear...anybody help.

A:Error-The procedure entry point...could not be located in the dynamic link library...

Quote:





Originally Posted by dosh


Every time I load a data CD on the PC I get the error-"The procedure entry point" (different procedure e.g. "ndPaint") "could not be located in the dynamic link library " (different .dll filename e.g. "USER32.dll"). Virus scan comes back clear..Spybot clear...anybody help.




Take a read on this http://www.smartcomputing.com/techsu...&ErrorID=21261 and you can go here www.dll-files.com to dowload any missing .dll files. Hope this helps.

Read other 5 answers
RELEVANCY SCORE 73.6

I was using my work computer yesterday and everything was fine. All of a sudden it popped up the following message and not I can't open up several programs or my email. Thank you in advance for any help!!

the procedure entry point HttpQueryInfoA could not be located in the dynamic link libraryWININET.dll

A:the procedure entry point HttpQueryInfoA could not be located in the dynamic link libraryWININET.dll

I have tried running a virus scan and it did find several and recommended to "move to chest". This has not helped the problem. I am sorry that I can not give any more technical information. I don't know what information would be relevant.

Read other 5 answers
RELEVANCY SCORE 73.6

Hello,

When I start my laptop, I am getting the message "The procedure entry point GetShortPathName coulkd not be located in the dynamic link library KERNEL32.dll" for Internet browser exe, yahoo messengar exe and many other programs.

My laptop was working fine till yesterday night. I have no idea what is the cause of this problem and how could I resolve it.

I will appreciate any response/help to resolve this issue.

Please let me know if you need more details.

Thanks,
Pankaj

A:Procedure entry point could not be located in the Dynamic Link Library KERNEL32.DLL

Have you installed some thing last time?If yes uninstall it.You can also try sfc /scannow command:Run cmd.exe with administrative previlliges and type sfc /scannow
If nothing help use System Restore:System Restore - Undo

Read other 4 answers
RELEVANCY SCORE 73.6
A:entry point SMapLS could not be located in dynamic link library KERNEL32.dll

Fixed Problem,sorry, ^_^
 

Read other 1 answers
RELEVANCY SCORE 73.6

I am running completely wireless now. I have a Linksys WRT54G router and about 5 computers connected to it wirelessly (G).

I have a printer that has a built in network card, and you can configure the IP address from the setup screen on the printer. (Xerox C2424)

I'm trying to link the printer up to the router, wirelessly. I have been told that you can use a USB Print Server, but that would not be necessary considering that I have a built-in network card already in the printer. I just purchased a DWL-G700AP D-Link Access Point to hook up to the printer, but I am unsure of how I should configure it. I am trying to link the printer wirelessly to the router, and sharing that to the people on my network.

Do you guys have any suggestions?
 

A:Network Capable Printer with Access Point link to Wireless Router? Is it possible?

Read other 10 answers
RELEVANCY SCORE 73.6

I am looking to get internet to a remote/distant building. I have used a wireless bridge before at another job but was looking for more guidance on the set and functions of it. Would this work, pros and cons etc.
 

Read other answers
RELEVANCY SCORE 73.6

I am new to this tool, in netmon you were able to create a IP-to-ip (point to point) capture, IS there a way to do this in message analyzer? I have read the TechNet articles on this and it does not show me what I need to know. If I can create a IP-to-ip
capture what do I do? How do I create it?


in case there is any misunderstandings this is the scenario, I have a workstation that has severe latency when accessing a server, no one can provide any clues and our WAN team says everything is perfect on the network. I need to install this tool on the
workstation and initialize traffic to the server and capture those packets. I do not need any other traffic.

Read other answers
RELEVANCY SCORE 73.6

Our company has a 100MB point to point connection through Comcast connected to a remote site 30 miles away. When everything is working properly, we can ping to that site in about 2 ms and transfer speeds back and forth look good.

Occasionally, our ping time will increase to 11 ms and transfer speeds take 3 to 4 times longer on larger files.

Comcast has looked at the circuit and not finding any issues. Our networking team is looking at switches and routers and claim no issues as well.

The increased ping time may last a few days and then go back to normal. After a few months or so it comes back again.

Any ideas on what may be occurring and why no one can seem to find out why it fluctuates? Our applications that we connect to at the site are running smoothly, it is just when we see large data copies back and forth that we see issues.
 

Read other answers
RELEVANCY SCORE 73.6

We have a point 2 point wireless network set up here (D-Link DWL-220AP) that seems to go down for no reason at all every few months (there's no really pattern to it). The connection is erratic for a couple weeks during that time (and sometimes requires a reboot) and then goes back to normal after those couple weeks and then is fine for another few months.

These units (the send and receive) are connected to cylinder style antennas which are a few hundred feet apart. It's difficult to blame the antennas or the connections to them since the connection always seems to come back and work fine for months at a time. It seems that if it was the antennas or there connections that it would be more frequently. Also, it is not weather related (as I once thought) as it occurs it fine weather too.

I really have no idea what is causing it? I doubt it is the settings because it seems if it was the settings than it would be down all the time and would require some changes on both ends. Recently I disconnected the receive unit from it's antenna and brought it over to the send unit so that they were side by side. I than disconnected the send unit from it's antenna so that they would only point at each other physically. I ran a ping test for over and hour and didn't have a single drop. This makes me think that both units are fine and that it is something in between the units that is causing the problem.

There are other wireless networks in the area and a radio repeate... Read more

A:Point 2 Point wireless goes down every few months

What are the routers 2.4 or 5.8 ? Do people have nextells near the APs are there other APs in the area around yours? Cordless phones?
 

Read other 1 answers
RELEVANCY SCORE 73.6

im taking a networking class and i need help we havent talked about Point to Point Protocol yet and my professor gave me these too ?
Can anyone help

What Hardware is needed to support Point to Point Protocol?
What Software is needed to support Point to Point Protocol?

thanks
 

A:Solved: Point to Point Protocol?

http://www.google.ca/search?hl=en&source=hp&q=Point+to+Point+Protocol&btnG=Google+Search&meta=
 

Read other 2 answers
RELEVANCY SCORE 73.6

Hello, I would just start off by saying that I have been lurking here lately and have found this website to be a huge asset for information over the last couple of months but I'm in a little rut and need a little advice on how to get out.

We are in the process of building a separate maintenance facility on the other side of our complex approximately 2000ft away (nearly clear l.o.s.). In it there will be 2 desktop computers and another laptop. In our main office we have a standard domain based network with dhcp. I would like to be able to connect this new building to our current office via a wireless connection and want to double check all of the hardware to due so before I finish up the purchasing.

Already in place on our current building is a hi-gain outdoor directional antenna which is mounted on our building facing the new building. The antenna is connected to a D-Link DWL-G700AP access point via a 30ft outdoor antenna extension cable. The access point then plugs into our main switch via a standard patch cable. I have already purchased another directional outdoor antenna for the new building but I'm not sure what else I'll need to connect the 2 desktops (wired) and 1 wireless laptop that will be in that building. Would I need to get another access point similar to the D-Link that I listed above and then connect it to a standard 4-port wireless router? Here is what I?m thinking in simplified diagram: Current building?s network > switch... Read more

A:Getting our network connection from point A to point B

You got VISIO? Can you show us what you mean using a VISIO Network flow-chart. Sounds like a project and a plan. How many floors is this building? Is this a business or someone house? Not hard to do, but you sound like you know what has to be done. You'll need and AP for each floor, you can test the signal using Net tumbler or some commerical software or a tester for wi-fi which would be better. Wireless laptop would do the trick. You want the signal as strong as you can.
 

Read other 3 answers
RELEVANCY SCORE 72.8

I'm trying to install an app for my 3DS (Power Saves)on my laptop, but having a really hard time.

My first issue was; When installing I got, 'Normalize.dll not found'.

My mate directed me to a dll download site, & I replaced Normaliz.dll. Now I get; The procedure entry point kernel32.IdnToAscii could not be located in the dynamic link library Normaliz.dll.
I have no idea when it comes to technology, & have spent 6-7 hours trying to crack this. Any help you guys can give, will be muchly appreciated! Thanks in advance!
 

A:Solved: entry point kernel32.IdnToAscii could not be located in the dynamic link libr

Read other 9 answers
RELEVANCY SCORE 72.8
RELEVANCY SCORE 72.8

I keep getting this error message when trying to update my browser I also get on that say DLL not found I cant update windows I cant update my browser I cant install adobe flash player bc of these error messages I have no idea what to do pleas eanyone
help........ I am on windows 2000 professional as well someone just gave me this PC bc they got a new one and I cant do anything with it.

A:Procedure entry point SetDllDirectoryW could not be located in the dynamic link library KERNEL32.dll

Check : http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/b8157460-29e2-4126-8214-9811e4a473f3
IE8 is part of Windows and can't be downloaded and installed.Arnav Sharma | Facebook |
Twitter Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Read other 2 answers
RELEVANCY SCORE 72.8

Hi,

I have windows 8.1 and windows server 2008 on single HDD.
My HDD have 4 partitions and tried to create a new partition using disk management utility of windows.
When i SHRINK one of the partition and created a 5th partition, my basic disk got converted to dynamic with a warning message. But without releasing the consequences of it, i opted to proceed further.

Windows 8.1 works fine.

Now the problem is, i am able to log-in to windows server but nothing comes up on screen, it just remains blank and it displays an error message before and after entering log-in password "the procedure entry point RtlReleasePath could not be
located in the dynamic link library ntdll.dll"

I think that i have lost MBR information which was stored in another partition.

How can i recover that information without loosing my HDD data. Since to convert dynamic disk back to basic disk we have to delete all partitions. I don't want to format and re-install OS.

Read other answers
RELEVANCY SCORE 72.8

Hiyas. Run into a bit of a problem with Windows XP Professional.Two weeks ago, my computer wouldn't start Windows. I don't know exactly how that happened, but I did a virus warning two days before, but I used AVG three times over the three days after that to remove it. I unfortunately don't remember what virus it was. It would continually restart itself after the Windows loading screen (the one with the blue loading bar). The error I got was "insufficient virtual memory for this task". I was able to fix that by going into the Recovery console and replacing the ntdetect and ntldr files manually. This alone didn't solve the problem, however, I had to also copy the system, system32 and security folders fresh from the Windows XP Professional CD. I was able get Windows to start, but it seemed that my system had reverted to pre-SP2 Windows XP Professional.I tried running Windows Update, but it would never appear on-screen after I clicked it. I tried running it through IE, but I got the error "The procedure entry point SHRegGetValueW could not be located in the dynamic link library SHLWAPI.dll". I have downloaded a copyof SHLWAPI.dl from File Gurus, but their copy is version 6.00.2900.2180 (xpsp_sp2_rtm.040803-2158) and the current copy I have is version 6.0.2800.1106. I was wondering if it I replaced the current one (.1106) with the other one (.2180), is that going to cause further problems? I'm unable up to update to SP2 for some... Read more

A:The procedure entry point SHRegGetValueW could not be located in the dynamic link library SHLWAPI.dll

Hi AmericanMeowth, and welcome to BleepingComputer.

How large is your hdd, and how much free space do you have on it?

With all the problems that you are experiencing it might be easier just to do a repair installation of the OS.

Read other 5 answers
RELEVANCY SCORE 72.8

hi I want to 
1. get all the promoted links closer to each other with no whitespace space.
2. I want to remove the green colour when you mouse over 
2. remove the "see all"
3. Leave no space on the right of the promoted links- white space again

Read other answers
RELEVANCY SCORE 70

This is just for info.
Some recent Office 2010 updates kill XP, or possibly just kill Office 2010 in XP
See here for details:
https://answers.microsoft.com/en-us/msoffice/forum/all/microsoft-office-2010-on-an-xp-os/0cf7643f-1fa0-4ac5-98d1-bcda9dd9461f?page=5#LastReply
http://www.eileenslounge.com/viewtopic.php?f=21&t=31405&p=243006#p243006

Alan
P.S. These are the updates so far that break XP, ( removing them repairs Office 2010 in XP )
KB4461614 , KB4461522 , KB4462157

Read other answers
RELEVANCY SCORE 69.6

I have a power point presentation in 2003. I want to convert it to power point 2010. What do I need to do?

Thanks.
 

A:Solved: 2003 power point to 2010 power point

Open the Powerpoint 2003 file with Powerpoint 2010 and save as a Powerpoint 2010 file.
 

Read other 2 answers
RELEVANCY SCORE 69.6

this is very weird
I have no restore points, so I create a new one, get a success message
then when I go to see the restore point, 7 comes back and sez no restore points there!!!
I ran a sfc /scannow, it came back ok
did my commodo full scan, it finds issues with office 365 but no rootkits etc, lol
ran malware bytes and other rootkit revealers, nothing found there
I have 8gb set aside for restore points, that has been plenty in the past
I did have restore points at one point, did not check too recently though
any ideas what this could be???
 

A:restore point create success... but no restore point found????

After creating the new restore point and receiving the success message did you click on OK to finish the process?

Read other 8 answers
RELEVANCY SCORE 69.6

I followed the instruction to manually create a Manual Restore Point and that works fine. Then I decided to set up the task in the Task Scheduler to automatically create a restore point once daily. For some reason the task is started as it should but it never completes and I have to manually terminate it. I have included in the attached ZIP file, 5 screen shots of the tabs of the task, 4 screen shots of the history tab starting and running and then 4 screen shots of the history tab when I terminated it an hour and 25 minutes later. I don't think a restore point takes over 85 minutes to complete so I wonder what I have set incorrectly??? The VBS file is C:\Program Files\Scheduled_Instant_Restore_Point.vbs and was downloaded from the W7 forum.

Let me know if you need any additional information. If this has been answered, I couldn't find the thread. Please point me to it.

Thank you.

Al Guden

Read other answers
RELEVANCY SCORE 69.6

I followed the instruction to manually create a Manual Restore Point and that works fine. Then I decided to set up the task in the Task Scheduler to automatically create a restore point once daily. For some reason the task is started as it should but it never completes and I have to manually terminate it. I have included in the attached ZIP file, 5 screen shots of the tabs of the task, 4 screen shots of the history tab starting and running and then 4 screen shots of the history tab when I terminated it an hour and 25 minutes later. I don't think a restore point takes over 85 minutes to complete so I wonder what I have set incorrectly??? The VBS file is C:\Program Files\Scheduled_Instant_Restore_Point.vbs and was downloaded from the W7 forum.

Let me know if you need any additional information. If this has been answered, I couldn't find the thread. Please point me to it.

Thank you.

Al Guden

Read other answers
RELEVANCY SCORE 68

I have two pc's in one there is windows xp and the other pc has window's 2000
i made networking table twice but either networking cable is not working or there is some other problem related to software.please tell me what i do know
 

A:point to point connection

Read other 14 answers
RELEVANCY SCORE 68

I believe this question is legal. I have two laptops that are wireless: one is a vista and the other a windows xp. I use dial-up and would like to use a point to point connection to share the internet. I just passed the comptia A+ core so I know a little but not enough, how could I make this connection?
 

A:Wireless Point to Point?

Set up an ad-hoc wireless network between the two PCs. Make sure it is working (e.g., you can ping each from the other) and then enable Internet Connection Sharing (ICS) on the dial-up connection.

If possible use the XP machine for the dial-up connection.

I understand that this is just an outline; I leave it as an exercise for the student to ask for any details needed.
 

Read other 2 answers