Over 1 million tech questions and answers.

No HDMI signal

Q: No HDMI signal

Hi, can anybody help?
I have a two year old XPS-8700 desktop, now with Windows 10 64-bit and 16 MB RAM, with NVIDIA GeForce GT 720 graphics card. Today I tried to connect to it my HDV camcorder Canon HV20 through the HDMI port at the back (the lower graphics card one, as the motherboard socket is closed), in order to transfer some videos I have not tapes. However, there is no communication, the Dell doesn't see the Canon at all. On the previous desktop I used to do it through the FireWire port, but the Dell doesn't have it.
I enabled Intel multiple display in BIOS, as advised on this forum some time ago, but it didn't help.
I read somewhere GT720 is quite weak, is this the reason? On the other hand, Nvidia claims this card is fully capable of video handling.
Will appreciate any advice.
Ryszard

RELEVANCY SCORE 200
Preferred Solution: No HDMI signal

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: No HDMI signal

Oops, sorry "on tapes" and not "not tapes".
Ryszard

Read other 1 answers
RELEVANCY SCORE 58.8

Unable to connect my compaq cq60 PC using my Hdmi port have trouble shooted hdmi cord using another laptop  and hdmi cord is fine and working so is the TV monitor a message is comming up Signal unkown how do i fix this???? Need for my Hdmi to work on my current laptop  as i use this mostly for work any answers please!.. running windows 10 by the way.

Read other answers
RELEVANCY SCORE 58.8

Spoiler (Highlight to read)  Unable to connect my compaq cq60 PC using my Hdmi port have troubleshoot hdmi cord using another laptop  and hdmi cord is fine and working so is the TV monitor a message is coming up Signal unknown how do i fix this???? Need for my Hdmi to work on my laptop  as i use this mostly for work any answers please!.. running windows 10 by the way.

Read other answers
RELEVANCY SCORE 55.6

Hello all, i recently bought a 1070 gtx but i am still using my old monitor until i can afford a new one.

The 1070 has no VGA slot so i had to buy one of those HDMI to VGA adaptors in order to connect it to my current monitor, however i get no image at all while i connect it.

This is the adaptor : https://s13.postimg.org/8iqt3l6ef/00054569abx.jpg Hama HDMI to VGA converter.
The card is the G1 version from Gigabyte.
Monitor is an old Samsung SyncMaster 933sn

PS : i also looked for a DVI-D to VGA adaptor but i can't find one at all. Any chance of a bit of help in trying to figure out what's the issue ?

Thanks for reading.
 

A:No signal : HDMI to VGA adaptor - no signal

Read other 6 answers
RELEVANCY SCORE 52.4

I have an HP Desktop Envy All in One. I used an HDMI cable to connect my PC and my Samsung UHD TV so I could use my TV as a 2nd Monitor. I have verified the cable is fine along with the HDMI ports on the TV. When I use the "Source" button on the remote and select HDMI port 2, it tells me there is NO signal or it's not strong enough. When I try to adjust the "Display Settings "on my computer, it appears my PC won't even detect the TV. So, whatever the issue it, it's my computer that is the problem and I am sure it's a simple setting. I am lost and very, very frustrated.
 

Read other answers
RELEVANCY SCORE 51.2

I have a new 40" LCD Dynex TV with HDMI connections and a one year old Acer computer with Windows 7, which has an HDMI terminal. I have tried to connect the two, using all kinds of combinations of plugging in the cable before and after the computer starts or the TV is turned on etc. I have gone into the display on the computer and see that the computer recognizes the TV as a device and it also indicates that it is working properly, but I get absolutely no signal at the TV. I have tried different resolutions and different recovery rates, but to no avail. I know that the connections are good and that the TV input mode is the correct one.
I see in the "display" function of the control panel that two monitors are shown - one for the TV and one for my computer monitor.
Can anyone help me?

A:HDMI - no signal

Start by calling Dynex and ask what "mode" the TV should be in to receive.

Read other 1 answers
RELEVANCY SCORE 51.2

So, I just finished building my first ever custom PC. At first I couldn?t even get it to turn on, but that?s not my current issue; after finally getting my computer to turn on, now it doesn?t even display anything on my monitor. In fact, it?s worse than displaying nothing; it shows the monitor?s blue screen with the ?HDMI No Signal? message, as if my computer isn?t even hooked up to the monitor. I use this same HDMI cable and monitor for my Xbox One, so I know that those aren?t the issue. The problem must be somewhere in the computer itself, but everything seems to be running fine.

Just to clarify; this is a fully custom built PC and this is my first time attempting to boot it up. I haven?t even had the chance to try to install my Win10 OS because I can?t get my monitor to present the Startup BIOS.
 

Read other answers
RELEVANCY SCORE 51.2

Hi,

I have a Gigabyte GA-MA785G-US2H mobo with radeon HD 4200 graphics. It has HDMI 1.3 and I have an old TV lying around which happens to have HDMI input. I just built a new PC so, I decided to hook up these 2 and make a Boxee box.

I have Ubuntu installed on the to-be boxee and on the new machine I have Windows 7 Home Premium.

When I plug in the HMDI cable, nothing happens, that is, no display on the TV. I even doubled checked everything-input, cable!

Am I doing something wrong here? The TV is a Hitachi L32S02A.

The cable is HDMI 1.3 one.

I even tried the new PC which has my Radeon HD 6770 on it-still nothing!

What should I try now?
 

A:No signal through HDMI

Change your resolution to 1366x768 or lower and make sure the refresh rate is 60 before connecting to the tv..? Set tv to hdmi1 or hdmi2 input.
 

Read other 3 answers
RELEVANCY SCORE 51.2

I have an ASUS monitor and ASUS desktop with a graphics card not on board graphics. I have an HDMI cable from the monitor to the video card. Today for the first time while on the internet my screen froze and then went blue saying no HDMI signal. I tried everything but still no signal. I then tried my VGA cable and all was working. I then tried my HDMI cable again and it worked until this afternoon when I was watching a video on the internet and the screen froze and said no HDMI signal. also when this happened I could hear my fan running loudly. Any suggestions on what the problem could be?

A:no HDMI signal

Happen to have another HDMI cable to try ? Chances it can be bad or connections on either end.

Read other answers
RELEVANCY SCORE 51.2

Hey,

When I connect my PC to my TV Via HDMI Cable, my TV does not receive a signal. When I check in Control panel>Display>Resolution, My TV hasn't even been detected. My TV is an LG 50", Card is a GTX580, and my OS is Win7.

Also, when I connect my laptop to my TV via HDMI (Also on Win7), It is instantly recognised and automatically displays, so it has to be an issue with the PC itself.

Spent a while on google trying to find a solution, but unfortunately I couldn't find one. Thanks for any help on this.

A:PC To TV via HDMI. No signal.

Hi there
What do you get on your MAIN PC when you press the windows + P key. It should be settable to display on 2nd screen only.

It should allow you to switch monitors. The monitor probably isn't being recognized since your PC is set to display on your main screen only (by default).

Ensure the TV is switched on and the input set for HDMI. You'll probably have to change the resolution - laptops seem to work fine --desk tops seem to be different -- probably because of the difference in the graphics cards - especially built in ones.

Laptops recognize when a monitor is plugged in -- this isn't always the case with Desktop PC's so try it with the WIN +P key with the TV switched on of course and the HDMI cable plugged in.

If you DO get it to work don't forget to re-set the screen back to PC display before disconnecting or at the next boot if you don't have the TV plugged in you'll end up with a nice blank screen.

Cheers
jimbo

Read other 6 answers
RELEVANCY SCORE 51.2

hi. i have a laptop dell inspiron n5110. i am trying to connect hdmi output with a tv. nut i have not video+audio signal. from dbtv decoder to tv i have signal. so the problem is to the hdmi laptop output. i tried the option to connect to projector from windows 7 but nothing. any idea? thank u in advance

Read other answers
RELEVANCY SCORE 51.2

I have an ASUS monitor and ASUS desktop with a graphics card not on board graphics. I have an HDMI cable from the monitor to the video card. Today for the first time while on the internet my screen froze and then went blue saying no HDMI signal. I tried everything but still no signal. I then tried my VGA cable and all was working. I then tried my HDMI cable again and it worked until this afternoon when I was watching a video on the internet and the screen froze and said no HDMI signal. also when this happened I could hear my fan running loudly. Any suggestions on what the problem could be?

A:no HDMI signal

Happen to have another HDMI cable to try ? Chances it can be bad or connections on either end.

Read other 0 answers
RELEVANCY SCORE 51.2

Hi

I have just built a PC with the ASUS M4A88T-M motherboard which has Radeon HD 4250 on board graphics. OS is Windows 7 Pro.

I have installed all the motherboard/graphics drivers that were supplied on the CD, but I cannot get any video or audio output from the HDMI slot.

I know that there are sometimes issues getting the audio through the HDMI cable but there is no video signal either. The VGS & DVI slots are fine, and also using a DVI-HDMI cable works, but then I have to use separate audio cables.

Do you have to enable HDMI within Windows anywhere ?

I have tried two different TV?s with no signal on either, so it seems to be a PC issue.

Any help appreciated.

A:No HDMI signal

You can try to download the latest drivers from here:ASUSTeK Computer Inc. - Motherboards- ASUS M4A88T-M/USB3

Failing that, You can try to exchange the motherboard (for OEM Windows 7 to activate the replacement board must be the SAME model), or look into getting a video card

Read other 7 answers
RELEVANCY SCORE 51.2

Hi, i created an account just so i can post this question. I have an Asus ROG G20 i5 processor, nvidia gtx 750. I was using my computer normally and then the tv screen randomly went to "No signal" and everything is plugged in. I tried to use the hdmi on my second monitor and it worked. I am using VGA on the TV right now, and the HDMI leading from my TV to my Xbox is working. i tried everything and nothing seems to solve my problem with the HDMI plugged into my TV and still no signal. plz help

Read other answers
RELEVANCY SCORE 51.2

Hello everybody. First of all, I'd like to say that I am not very technically savvy, so I apologize for any ignorance on my part. I posted this issue and a follow up on another forum; however, that forum seems to be a little on the dead side, so I decided to ask you experts. For that reason, I am splitting this into the two days I have spent trying to figure this out (to no avail).

Day 1:

So basically, I've been connected up to this 37" Emprex HDTV for a few days (nothing great... use the nice Samsung for the PS3), with no problems... well, ok, one problem. While fine at first, yesterday the computer decided to stop picking up the HDMI audio, with Windows 7 listing it as "unplugged." I tried uninstalling, reinstalling, and rolling back the drivers as well as installing new ones (Realtek... not sure if it had anything to do with anything, but it was worth a shot) to no avail. That was only the start of the problems however.

This morning, everything (except for the audio, of course) was peachy. A few hours ago, however, the TV decided to just stop reading the HDMI signal all together. No video, no picture, no nothing. All I get is a blue screen that says "No signal." I've tried numerous cables, unplugged and replugged countless times, uninstalled and reinstalled all the drivers, and nothing. VGA works though, so that's what I'm using now. By the way, the problem occured after I had moved the TV to a new spot, so it's n... Read more

A:No HDMI Signal

when u connect the cable to your laptop, do u hold down the fn key and click on the monitor key up on top? I think its one of the F keys? As fas as audio goes, you will need to go to your audio setting and choose HDMI .Hope that works for u.
 

Read other 2 answers
RELEVANCY SCORE 51.2

Hi all, there is no signal coming from the G70-80 HDMI port to my LCD-Display.I already tried different HDMI cables, but no change. The display stays black. I had a look at the BIOS, too, but there was no option for the Intel graphics chip. In the Intel graphics options I can only choose the integrated display, there is no 2nd display.Pressing the "F10" key and selecting "duplicate display" or "exted display" does not help. Anything else I could try? Thank you! Regards,ayalala

Read other answers
RELEVANCY SCORE 51.2

So I am starting to regret buying this system.  Latest problem: no signal from the HDMI port, the cable used and the monitor work perfectly well with other system.  Anyone know how I can diagnose potential problems or is suffering from the same? Thanks in advance.










Solved!
Go to Solution.

A:P70 HDMI no signal

does the machine see your monitor? if it does whats your resolution set to? 

Read other 9 answers
RELEVANCY SCORE 51.2

II just purchased the HP Omen and i wanted to extend my laptop screen onto my TV but when i plug my HDMI cable into the TV it doesn't display anything and just says "no signal". I have tried three different HDMI cables and i know they work as i used them for my xbox and i have used my sisters laptop and when I plug hers in it works fine. I dont know much about why it isn't working i have changed the projection and it still isnt working. I have been looking at the forums for hours and i can't find a solution I dont know if my drivers are outdated but i went to the support and put in my product number and it doesnt say it requires any update so I am not sure why the HDMI port is not working. This is the first time i have used the laptop so i dont think the port is broken but missing drivers or somthing. I would appreicate the help very much thank you. Product name: OMEN by HP LaptopProduct number: Y0V19EA#ABU













Solved!

View Solution.

A:HDMI to TV no signal.

Hi, Have you tried to hit f4 ? This key allows laptop to send video signals to an external screen. Regards.

Read other 2 answers
RELEVANCY SCORE 50.4

I bought a new HDMI cable yesterday, hooked it up to my laptop and TV and it worked just as expected. I unplugged the cable went away a few hours and when I came back to use it again and the TV was receiving no signal, Black screen with no sound. The laptop recognises the TV and says the connection is working properly but the TV shows nothing. The cable works between my Ipad and TV so it definitely looks like a setting issue on the laptop which is strange as I haven't changed anything manually between it working and then not. The TV is on the correct input and I have set the laptop to duplicate on a second screen. Tried a few things like changing the resolution and refresh rate but no luck.

Any ideas are appreciated. TIA

Read other answers
RELEVANCY SCORE 50.4

Hi  I have a HP Notebook Untill recently I have been able to connect my pc to my philips tv withou any  problems.Now I get no signal when connecting my pc to my tv.I have confirmed that the problem is not with the tv or the HDMI cableI think this might be because of windows update.The drivers are generic so I cant update the drivers  Any ideas?

Read other answers
RELEVANCY SCORE 50.4

Hi, I have an HP ProBook 640 with Windows 7, where I can not get signal out through Hdmi port - where can I set this option?

A:Signal out through Hdmi port

Let's check device manager and see what is listed under display adapters. We need to be sure the correct video driver is installed. Also please describe your setup. HDMI cable from laptop to what? Monitor? TV? Have you tried the Windows key on the keyboad plus the p key to see if you can get it displaying on the external screen? 

Read other 1 answers
RELEVANCY SCORE 50.4

I just bought a new asus monitor 2 weeks ago. everything was fine until yesterday. The monitor knows when you turn on a computer hooked up to it and turns on by itself. So yesterday when i tried rebooting my computer it said "dvi no signal" i tried to to change the input again to dvi and the buttons did not respond and i couldn't event turn off my monitor so i unplugged the power cable and plugged back again and this time it did recognize it. It also happens when i'm using my other computer with the HDMI cable! both cables are hooked up to the monitor but i don't use both computers at the same time! can anyone help me fix this issue? thanks!!!
 

A:New monitor DVI or HDMI no signal

It just turn on your monitor before turning on your PC.
 

Read other 1 answers
RELEVANCY SCORE 50.4

Hi, I have an HP ProBook 640 with Windows 7, where I can not get signal out through Hdmi port - where can I set this option?

Read other answers
RELEVANCY SCORE 50.4

So when i put an HDMI and a DVI cable from PC to TV the TV shows up 'No Signal' even though they're connected (it used to work on the specific TV) what to do?
What to do man :/
 

Read other answers
RELEVANCY SCORE 50.4

I have recently hooked up two Samsung Syncmaster 2243s to my HP Compaq laptop at work (waiting on an email for the specific model for the Compaq and Nvidia Quadro video card). Unfortunately, the second monitor says "Check Signal Cable" and will not display anything. Here's how I have it set up:

The first monitor is hooked up to the laptop on the VGA port and works fine. I have used extended display with my laptop screen and Syncmaster with no trouble. I hooked up the second monitor to the HDMI port in my laptop with a DVI-HDMI cable. At no point (eg. when restarting) does the monitor show anything but "Check Signal Cable".

I have updated my drivers (windows and Nvidia) and tried removing my display adapter and restarting, forcing the computer to reinstall the drivers. I have rebooted with the second monitor attached and unatatched with no luck.

The key point is that the computer recognizes the second monitor (with the Nvidia control panel I can turn off the laptop screen and set both monitors as my extended display - second monitor still says no signal although the first monitor, which works, behaves as if it were part of an extended monitor). Further, the second monitor works normally, as it was used on a previous laptop via VGA. What could cause the "no signal cable"? I did buy a second DVI-HDMI cable with the same result. Any help would be most appreciated.
 

A:Second monitor HDMI no signal

typically, dual monitors is not done with VGA, or if so, is implemented using a 'Y' cable.

A video card built to support dual video out is usually DVI with Y or two DVI ports on the card.
 

Read other 3 answers
RELEVANCY SCORE 50.4

Issue:
I've tried 2 TVs (Samsung HL67A750A1 and LNT2653HX) and they both give the same 'No Signal' error. For 8 months this setup has worked without an issue with both of these TVs.

The original issue started with the ATI 4650. The PC would still display without issue, but it would randomly freeze and then a few days later the motherboard started giving a diagnostic error code that the video RAM check during POST failed and the computer would no longer boot.

I installed an ATI 4870 I had and the computer booted fine and no more lockups. I was glad I finally figured out the issue. But then the next day the LNT2653HX LCD said 'No Signal' when turned on. A reboot/reconnect cable/re-seat video card, etc wouldn't help. I connected the PC to the HL67A750A1 and received the same error.

Tests:
Both TVs will work fine with another PC and XBox 360. I installed the 4870 in the other working PC and immediately received the 'No Signal' error. I placed my 5870 back in the working PC and while it wouldn't show POST, it did display once Windows 7 booted (interestingly when I connect through my Denon Receiver, the PC will show POST on the HL67A750A1 - just not when directly connected).

The bad PC with the 4870 will boot to Windows and I can even connect to it through RealVNC and gain access to the file shares. When looking at the display properties, it only detects a VGA connection (the RealVNC I assume). I installed Powerstrip and the EDID information it is pulling from the registry is... Read more

A:HDMI No Signal Error

I'm going to tell you that you may need to check your PSU, I wonder if it's putting out the proper power as this sounds likely that it is not.

Read other 1 answers
RELEVANCY SCORE 50.4

I have an HP2311x monitor. I use it hooked directly to my computer via DVI and it works fine. I aam trying to hook up a Samsung Blu-Ray player to the monitor via the HDMI in put. I have run a cable from the HDMI out on the player directly to the HDMI in on the Monitor, but I get a no signal message on the monitor. I have tried using a different HDMI cable and unplugging and ressetting the monitor, but I still get the no signal meaasage. How can I solve this/

Read other answers
RELEVANCY SCORE 50.4

Hi people, thanks for reading,

I have just been using a vacuum on the fan of the computer and unplugged everything. I've now gone to use it again and the AOC monitor is saying 'no signal' I've connected the HDMI cable up just how it was before so I'm completely stumped as to why it's not working now.

I've tried quite a lot of things but would be interested to know what your suggestions are.

Many thanks again,
 

A:Aoc Monitor No Signal - HDMI

Could be hardware damage. Vacuums create static electricity. Static destroys electronics.

Test with a different monitor to verify the computer or monitor is faulty. Or test that monitor on a different computer.
 

Read other 2 answers
RELEVANCY SCORE 50.4

Hi

I've just recently had to rebuild my HTPC with a newer version of Windows 7. I have been using an ATi HD5450 card in my setup for over a year now with no problems.

However, with this new build I've put on, I am now not getting any signal to my receiver from my HTPC. However, as soon as I turn on my TV, I get a signal to the receiver!! So I can get audio but always have to have the TV on, which is not how I remember it working before.

I am no nearer to finding out why all of a sudden there is no signal from my PC to receiver. I have carried out a few tests that Yamaha have advised me to as I thought the issue was with the receiver but it looks like a problem with the Windows 7 and codecs.

I've just checked and I am running the latest drivers for my card as well.

Hope someone can help! Thanks

A:No HDMI Audio Signal

Do you have your playback device on the PC set to AMD HDMI Output?

Read other 2 answers
RELEVANCY SCORE 50.4

So I recently wanted to try use two monitors. The one I'm using at the moment, DVI to DVI works fine if it is plugged in alone. If the other one is plugged in while its loading it up shows the windows icon then goes to a gray screen. If it is turned on and I plug in the cable it shows up as no signal, the screen is vga to hdmi. Any help is appreciated!
 

A:second screen VGA to HDMI no signal?

Read other 10 answers
RELEVANCY SCORE 50.4

Hi all,

I am trying to use my Laptop with an ACER 272HUL Monitor via HDMI cable.

Situation:
Whenever I plug in the HDMI cable, the Monitor Model (Acer K272HUL) and the correct max resolution (2560x1440) is being shown on screen of the Laptop (Screen resolution window).
Also, when selectimng the HDMI port I use on the monitor, the monitor does NOT say "no cable connected" which it does at all the other ports. So, seems that the principle connection between the Laptop and the Monitor works, but no signal is sent ... ???
After a little while, the monitor also says "No signal".
Now, I found on the web that the max. resolution of that monitor on HDMI seems to be 1920 x 1080 @60 Hertz, so I changed the resolution to that values but with no luck. Also reducing the repeat rate to 50Hz (by going to "advanced" and select it from the "mode" Button) does not help - monitor stays black.
Any help?

Read other answers
RELEVANCY SCORE 50.4

HDMY1 and HDMI2 scannimng  No signal. Then goes into sleep mode. Noresponse ON ENVY 750st when placing the HP CD ISP Led Backlit Monitors

A:No HDMI signal received

Hey there @jim1200, Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that you are having trouble with connecting a display to your computer and you are getting no signal. I am happy to help with this. Does your computer have a discrete graphics card installed? If so and if you are trying to use the two HDMI ports on the back of the motherboard of the computer instead of an HDMI port on that video card, then that is the issue. If a video card is installed, the integrated graphics adapter is disabled. Try using the HDMI port on the back of the video card itself. If this is not the case let me know, but if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

Read other 1 answers
RELEVANCY SCORE 50.4

Hello, just installed Revo M1-601.The monitor is Acer VK228 connected by HDMI cable.After a few minutes the screen goes black and shows "HDMI no signal" blinking. Does anyone have a solution.Merci   

Read other answers
RELEVANCY SCORE 50.4

I upgraded from Vista to Windows 7 home premium a while ago and connected my laptop
to see some movies and all I see is NO SIGNAL.With Vista it was ok and now NO SIGNAL.
I checked my laptop and it detects my Vizio tv and show 1 and 2 monitors but no output
signal.Nvidia shows two monitors but no output.Been searching with no results.I've seen
a lot of views to my post with no replies.It looks like no one knows about this problem.Need help.

A:laptop to tv via hdmi NO SIGNAL

The proper input is selected on the TV? DVI 1 or DVI 2, etc?

Read other 5 answers
RELEVANCY SCORE 50.4

I'm trying to connect my pc to tv to watch a movie but it keeps giving me the no signal. Please help this computer illiterate girl out. ughhhhhhh!!
 

A:hdmi cable no signal, help please?

Desktop computer or laptop?

Start with both powered off, connect the cable, power on the TV and then power on the computer.

If it's a laptop, you may need to change the output. This is usually done with the FN keys ( FN + F6 I believe) which will cycle through the video outputs (ie: laptop screen, video output, both)
 

Read other 2 answers
RELEVANCY SCORE 50.4

Hi,
My Dell XPS 15 9530 from 2014 no longer seems to be able to connect via HDMI to TV or projector since I upgraded from Win 8 to Win 10. It worked before. I get "no signal" on the second screens.
Spent half a day already on this, googling and trying the following:
* Updating to the latest Dell drivers, Windows updates, and Nvidia updates.* Disabling either of Intel (HD Graphics 4600) or Nvidia (GT 750M) graphics cards* Rolling back to older versions of display drivers* Trying different HDMI cables* Running Dell's diagnostics tool* Lowering screen resolution* Restarting everything
But nothing works.
The external screens don't show up in Screen Properties. Pressing Fn+F8 brings up the four choises (Duplicate etc.) but nothing happens when I click any of those options.
Some posts I found via googling seem to suggest that Win 10 simply isn't compatible with HDMI in some laptop/graphic card/CPU configurations. Can this really be the case, or what can I do?

Read other answers
RELEVANCY SCORE 50.4

getting no signal from TV running an amus hexacore, 64 bit win 7 system...

TV is a vizio 43in i believe 2 or so years old... has 4 hdmi slots and none of them are getting signal so im assuming its windows or my video card or something im not doing correctly to switch from my basic computer video cable to hdmi

ATI Radeon 2 5700 video cards

A:HDMI cable No signal

What is your make and model# for you Video Card? do you have an HDMI out of your video card? do you have TV out of your video card?

Read other 9 answers
RELEVANCY SCORE 50.4

Hello, just installed Revo M1-601.The monitor is Acer VK228 connected by HDMI cable.After a few minutes the screen goes black and shows "HDMI no signal" blinking. Does anyone have a solution.Merci   

Read other answers
RELEVANCY SCORE 50.4

Hello, I just bought a new PC and my monitor is showing that it's not working. Everything else works, but the computer screen itself. How do I fix this?
 

Read other answers
RELEVANCY SCORE 50

At some point last week I removed the HDMI cable from my video card to use with another device temporarily. Later, after plugging it back in I could not get anything to show up. I later hooked up an extra monitor I had laying around through one of the DVI ports and performed a system restore because the system apparently failed to boot. I have been unable to get the HDMI out to work properly.

When the HDTV is connected with the HDMI cable, both the TV and monitor hooked up via the DVI port behave as if there is no signal (e.g. displaying "no signal"). The DVI monitor does not go blank until what I assume is the Windows login screen shows up. At first all sound would stop too because I had set the HDMI out as the default sound device as well, but chaning to a different default sound device and plugging in the HDMI monitor no longer stops audio. I booted up in safe mode and the monitor plugged in via DVI port does not lose signal, but the HDMI monitor still shows nothing. I wasn't sure what do to from there.

So far I've tried uninstalling and reinstalling the driver for my graphics card, buying a new HDMI cable, and toying around with the card's settings in the Catalyst Command Center (although I barely did anything there).
 

Read other answers
RELEVANCY SCORE 50

when i connect a dvi or hdmi from my gtx 780 to my acer H274HL Monitor all works fine but when i want to connect display port cable on my gtx 780 and the other side is hdmi that goes to my monitor than there is no signal at all

i am running windows 10 64 bit enterprise and all drivers are up to date also windows updates are up to date

i have tryed everything and nothing helped can some one help me

many thanks

A:display port to hdmi no signal

You may need an active adapter like this: http://www.bestbuy.com/site/insignia...&skuId=5812034

Read other 0 answers
RELEVANCY SCORE 50

Hello, recently i got another monitor. I was looking forward to test it, so i replaced the cables from my old monitor to the new one. When the screen turned on (using VDI) the new monitor was bright. I thought of a problem with the new monitor after playing a little with the monitor settings and PC setting but it wasn't it. As i placed back the cables to the older monitor, The screen was zoomed in a little bit and when the windows was suppost to load, the screen had a note saying "no signal" at it and just turned off. After some advices i found online such as un-pluging and re-plugging all cables and power from the PC, letting the PC to be turned off for couple miniutes, factory reset ( Honestly i thought this would work!) And bunch of other things, nothing seems to fix it and im desperate for help. The PC is brand new. A bit less then a year, and i was running it for 3 hours before this problem started. What can i do?
PC specs are:
Monitor: Six Core i5 8400 2.8Ghz Coffee Lake S1151 Tray
Antec A30 Silent 92mm Blue LED Fan
Gigabyte Z370P-D3GB (2x8G) Crucial Ballistix-Sport DDR4 2400Mhz RED CL16
ASUS Nvidia GeForce GTX1070 8G DUAL FAN
SSD SanDisk PLUS 120G SATA III
Seagate 1T 3.5'' Sata3 Barracuda 7200RPM 2 Years Warranty
LG DVD-RW X24 GH24SCO
Antec GX330 Windowed + ANTEC 550W 80+ Bronze MODULAR- Windows 10 64 bit
AOC 24'' E2475SWJ 1MS HDMI + Speakers

If anything is missed in details, let me know ill respond as soon as i'll see. Thank... Read more

Read other answers
RELEVANCY SCORE 50

Hello!

I recently bought a Slimline HP Desktop 270-P024, yesterday I tried to watch a movie and decided to connect my desktop to my tv monitor through an HDMI cable. When I booted the PC, the HP Logo showed up on the TV Monitor, but then the signal went off.


I checked device manager and my tv is being detected, but yet the signal isn?t showing. I ramdonly tried changing the resolution through the Display Settings & suddenly the TV would display my PC but only for a few seconds... After a while no signal at all was found. The TV says something such as wait please.... But doesn?t display anything.

My specs are:


- Windows 10 operating system
- 12GB system memory
- 7th Gen Intel? Core? i7-7700T processor
- INTEL HD Graphics 630

What can I do to fix this? Thanks in advance.

Read other answers
RELEVANCY SCORE 50

Hello,

I have a problem with my Lenovo Ideapad Z570 or with my TV Thomson 40FW3324. I'm trying to connect them with a HDMI cable. When I plug the cable in and extend or duplicate my screen nothing happens. I reinstalled my graphic card drivers (Nvidia 520M GT and INTEL HD 3000), it didn't help. I even bought a new HDMI cable to be sure that it isn't a cable malfunction. What should I do to get it working?

A:When trying to connect computer with HDMI to my TV I get no signal!

Have you selected the correct input on the TV?

Read other 8 answers
RELEVANCY SCORE 50

Hi,

I was using my computer this morning without any issues, i changed a setting on my amd crimson software to do with resolution and now i cannot get any signal to any of my monitors through HDMI, i have tried alot of things like going through the bios to see if theirs anything obvious in their it has changed but i cannot find it.. it still says it's connected in the device manager and if i connect my other monitor while i am connected with this one it will show it as connected on the crimson software..

I hope i've explained myself well enough and you're able to help

Thanks
Aaron
 

Read other answers
RELEVANCY SCORE 50

I have a HDMI cord connection to my TV that usually worked well but since some moths ago it has stopped working. Tv says "no signal". it started happening more or less when I updated my OS to MS Windows10 although I don't know if this was the cause. I don't have this issue with my labtop -also updated to Windows 10 some month ago-. the cord connexion seems to work well also.

A:PC connected to Philips TV via HDMI but no signal

Typically what happens is an update changes one of the settings, then it is just a matter of checking out the settings.  With the TV set on the correct HDMI input and the computer connected via HDMI, right click on an empty spot of the desktop and then pick "Display settings".  There should be a graphic showing the monitor with a "1" inside. Directly under that it should say "Identify"   and    "Detect".  Click on Detect to have Windows look for the TV.  If things are working, it should then find the TV.

Read other 1 answers