Over 1 million tech questions and answers.

canon printer stuck on landscape setting ...

Q: canon printer stuck on landscape setting ...

canon MG2400 - how do I unstick this setting - when I get to the print window it reverts from portrait to landscape ....
Tech Support Guy System Info Utility version 1.0.0.9
OS Version: Microsoft Windows 10 Home, 64 bit, Build 17134, Installed 20180619170615.000000-480
Processor: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz, Intel64 Family 6 Model 76 Stepping 4, CPU Count: 4
Total Physical RAM: 2 GB
Graphics Card: Intel(R) HD Graphics, 1024 MB
Hard Drives: C: 27 GB (0 GB Free);
Motherboard: HP 827C, ver 93.21, s/n PGBVB028J42157
System: American Megatrends Inc., ver HPQOEM - 1072009, s/n 5CD6372JK1
Antivirus: Windows Defender, Enabled and Updated

RELEVANCY SCORE 200
Preferred Solution: canon printer stuck on landscape setting ...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: canon printer stuck on landscape setting ...

You have this HP Notebook x2 - 10-p020ca.
It was purchased in January 2017 and came with Windows 10 Home 64-bit and came with a 32 GB(28 GB actual capacity) eMMC storage drive.
Because its storage drive has no free space left, that's my guess why Windows 10 Home 64-bit is 19 months out-of-date.

I've used nothing but HP printers since 1997, so I'm not familiar with how Canon printers are set up and work.
The printer properties in your Canon PIXMA MG2400 printer should have settings that allow you to select landscape or portrait or auto mode.
Make use of its on-line manual and see it helps you.

----------------------------------------------------------------

Read other 2 answers
RELEVANCY SCORE 63.6

Hello:

In printing screens, it is often necessary to set the printing orientation to either Portrait or Landscape. However, drilling down in menus until you get to where you can set this is boring and time-consuming. Is there any way to do this quickly (button/macro or the like) for Win 7?

Thanks!

Hans L

A:Setting Portrait or Landscape

Maybe try this freeware software, it's been around a while and seems pretty popular Gadwin Printscreen

Read other 9 answers
RELEVANCY SCORE 61.6

I have a very weird situation. I have a user that is printing invoices from a web portal and every time she prints, they default to landscape. We have setup the printer in IE to Portrait but they always come up as landscape. We had her login on a different computer and it comes up fine but on her system it is not. I had her try printing to another printer and it still comes up landscape.

I thought it could be a print driver but unfortunately I don't believe it is.

She is on XP SP3
IE 7

This is very weird, please let me know if more information is needed.

Thanks,
 

A:IE printing in Landscape by default - Not accepting portrait setting

I would first try reinstalling. Likely it IS the printer driver...
 

Read other 1 answers
RELEVANCY SCORE 60.8

While in the middle of printing several copies of a document yesterday, my Yoga 2 suddenly started printing only in landscape mode and will now only print in landscape despite being set to portrait.  Any suggestions?  It does this on the printer at my office and also at home.

Read other answers
RELEVANCY SCORE 60.8

While in the middle of printing several copies of a document yesterday, my Yoga 2 suddenly started printing only in landscape mode and will now only print in landscape despite being set to portrait.  Any suggestions?  It does this on the printer at my office and also at home.

Read other answers
RELEVANCY SCORE 60.4

I am having this problem with a windows 7 HP Elitebook 2540p laptop. Whenever I print a power point presentation on the landscape setting, the first page of the presentation comes out in portrait. This problem only happens when printing to one of our toshiba copiers in color. This is not a problem with a smaller hp color printer also hooked up to the computer. I have checked the orientation settings and everything seems normal. I have even replaced the laptop with a new formatted one with the most updated drivers. The printers are toshiba 3530 and 2830s.Any help would be appreciated.Edit: Moved topic from Win 7 to the more appropriate forum. ~ Animal

A:First page of a Power Point Presentation prints in portrait on landscape setting

Just to rule out a couple things I am using the PCL6 drivers, but tried using the PS drivers the other day with the same result. This problem also happens when printing PDFs.

Read other 1 answers
RELEVANCY SCORE 60

If I want to print a document in Landscape format that I have typed in Word, I click on Print/Properties/Basics/Landscape/OK, and it still prints out as vertical or Portrait.

How can I get it to print in horizontal or Landscape format?

Thanks.
 

A:I can't get printer to print in Landscape.

Hi,

Check within the Printer Properties settings or Printer Options

When you select Print there will normally be a settings options or similar option.

Ensure you have your page orientation set to Landscap in this as well.

hth

Ceri
 

Read other 1 answers
RELEVANCY SCORE 59.2

I have two printers here in my office, one that we use for printing normal size sheets of paper and a Dymo Labelwriter 330. The labels in the Dymo are long and not tall and must be printed in landscape mode. Is there a way to force (or default) that particular printer to always print in landscape? I've tried setting the preferences on the printer itself and they seem to have no effect on anything else. We waste a lot of labels because people forget to change the preferences before they print.
 

A:Default printer to landscape mode?

Read other 8 answers
RELEVANCY SCORE 59.2

Hi

My printer is a EPSON stylus 440 and when i try to print on landscape mode it still prints portrait mode what should i do?
 

A:Printer wont print landscape

Read other 6 answers
RELEVANCY SCORE 59.2

I inherited an 1135N printer, need users manual etc.

I want to print landscape VS portrait ... how do I make the change

need newbie basic steps
 

A:1135n how to configure for landscape printer

Dell 1135n Multifunction Mono Laser Printer (support site)

HERE is its on-line user manual.
Note: Adobe Reader or some other PDF reader is needed to open and view it.

---------------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 59.2

I recently uninstalled and reinstalled the software (Multipass Manager 3.01) for my Canon C5500 printer; during the reinstall, I am receiving the following error "Failed to register mpservic.exe to windows NT as domain or service". Can anyone give me any insight on how to make the software register this executable to the service MPSERVICE? I tried to remove all entries for the Canon printer in the registry and reinstalled the software; but I am receiving this same error everytime and the software is uninstallled after the error. Please help!!
 

A:Reinstall of Canon Multipass 3.01 software for Canon C5500 printer

Two things to try: If you have anti-virus software, disable it, uninstall the cannon stuff. Reboot (be sure av is still disabled), and reinstall. Then reenable av, restart for good measure.

Another suggestion from Canon, though not apparently EXACTLY your issue:

http://www.expressresponse.com/cgi-...02877.2509.2&search_erproduct=MultiPASS+C5500

Also, see this document.. it most likely is not related, but..

http://www.expressresponse.com/cgi-...3490.14078.7&search_erproduct=MultiPASS+C5500
 

Read other 3 answers
RELEVANCY SCORE 58.8

I have printed out a two page document which should have been entirely in
portrait in MS Word 2003 and the first page has come out in landscape and the second in portrait - I had selected Portrait in the set up.
I don't know how to correct this.
I i just print a single page it comes out as Portait just like I have selected.
I use an HP Pavilion laptop zd8000 Series connected to the HP All in One by USB Cable
Deatails of the All in one are below

H P Photosmart C5180 ALL IN ONE.
Operating System Windows Home Premium
Connection USB Cable
 

Read other answers
RELEVANCY SCORE 58.4

I have a Canon i850 printer which I have immensely enjoyed using these past four+ years. For one thing, I've never had even one paper-jam during that time.

My understanding always has been that it is best to have separate components, so that's why I've always owned a dedicated printer. However, it appears that the present-day trend is more toward all-in-one units. Actually, I'm in the market only for a printer, but if the Canon MP600 all-in-one is technologically advanced far beyond my i850, then I would strongly considering buying one.

The MP600 has a scanner (which I don't need, although it would provide me with a back-up) and it has several modern features of convenience which my i850 doesn't have. What I would especially like to know is whether or not the MP600 produces appreciably better results with both text and photos than my i850. Also, would it be faster and cheaper in the long run than the MP600? While quality of results is more important than anything else, speed, economy, and convenience also enter into the equation.

(I was also considering the Canon PIXMA iP6700D photo printer, but from what I've read so far it appears that the MP600 all-in-one is more highly-regarded.)

I would appreciate hearing from anyone who has an opinon on this matter. Thank you very much.
 

A:Canon i850 printer vs. Canon Pixma MP600 All-in-One

Read other 9 answers
RELEVANCY SCORE 54.4

Canon do not support their BJ30 printer on a Windows 7 64 bit OS, and do not supply drivers. Does anyone know how I can use this printer on this OS, by perhaps using similar drivers etc? Thanks.
 

A:Printer Driver needed for Canon BJ30 printer on a Windows 7 64bit OS

on another forum, someone has managed to use the BJC-85 printer drivers to work with windows 7 - doesn't
say if 32 or 64bit windows 7 though

also have read here
http://forums.techguy.org/windows-7/990380-windows-7-64-bit-bj.html
 

Read other 1 answers
RELEVANCY SCORE 53.6

When I tried to install a new Canon Pixma ip6220D printer on my Sony Vaio Windows XP Media Edition w/ SP2 desktop I receive an error that the computer cannot detect the printer after I hook-up the USB cable to the computer from the printer. This is after a balloon dialog appears in the system tray noting that new hardware was found - the hardware being a Canon ip6220D. The Canon software notes that it could not detect the printer and that there was a printer driver failure. Eventually a Windows error box appears noting that an error occurred installing the new hardware.

I have the same problem with a printer that previously had no problems. That printer is a HP Photosmart 3210xi.

I ran malware check using Threat Fire 3 which didn't find anything.

I have tried different USB ports with no success. I have tried USB ports that other devices use with no success.

Any suggestions on how to attack this problem would be appreciated.
 

Read other answers
RELEVANCY SCORE 53.6

My trusty old Canon printer S400 finally has decided to act up and quit on me after several years. I am getting an Error 5700 when I attempt to print to it. I can not locate what this error means.

If someone knows, I'd appreciate it.
 

A:Canon printer error 5700 on S400 printer

I don`t know what the error means, but have you tried uninstalling then reinstalling the printer?

Check the cables for damage and connection.

If this doesn`t work then maybe a new printer is in order.

Regards Howard
 

Read other 15 answers
RELEVANCY SCORE 52.4

I get a printer error that I have two of the same cartridge installed (which I don't). I did the maintenance cleaning. I was able to get it to print for awhile by opening and closing the lid, but now it is not printing. I use Canon cartridges, and several are new cartridges.
 

Read other answers
RELEVANCY SCORE 50.8

I am pretty tech savy but I can't even

1. load the ink cartridges

2. get the paper to feed

3. after installing the drivers they are not recognized

Whacking head
 

A:nightmare setting up Canon Pixma MP160

Is the printer even coming on? Any lights on or blinking?
 

Read other 3 answers
RELEVANCY SCORE 50.8

Hello,

I'm Ryan. New to these forums. I thought I would ask this question here since I have tried a lot of trouble shooting steps here. I am using the CANON MG 3570 All in One. My ADSL Modem Router is the TP Link TD-W8968. I need help setting up the wireless. I just cannot seem to do it.

I follow the driver instructions, but it's not able to install the driver over the network. I have tried doing it via WPS, Cableless Setup, and wireless through USB. They all don't work. I do have a software printer driver file which prints directly to PDF, so I don't know if that interferes with us but I am able to access the AIO through USB connectivity. My OS configuation is as follows.

Windows 7 Ultimate x64
AMD BE 2350
RAM - 3GB DDR
No working Optical Drive. I downloaded the drivers through the internet.

Router Settings:
DHCP - Enabled
Firewall in Router - off
Wireless Security - WPA 2 Personal
SSID Broadcast - On

If there is anything else that I need to give, let me know but I'd love to set this up. If it's a unit malfunction, I'll definitely take it up with Canon but I thought I should do all the trouble shooting here.

Blessings in Christ,
Ryan
 

A:Assitance in setting up wireless on Canon MG3570

Read other 16 answers
RELEVANCY SCORE 50.4

Hi guys,

I have an issue that I don't know quite know, how to approach.

I would like the mentioned printer to revert back to a "black and white" setting pr. default every time a user have chosen to print out a job in color. Naturally, I would like to set this on the printserver itself and have the setting filter down to the entire userbase. How do I do this?

The printserver runs on a MS 2003 server R2. Setting "black and white" as admin in the printer's properties on the printserver itself, changes nothing.

Bye,
 

Read other answers
RELEVANCY SCORE 49.6

hi,
last week my canon i960 bubble jet printer was getting error meesage 5c00 (waste ink). a buzzing noise with the orange light flashing 4 times which menas ink run out. But all cartridges had plenty ink left. It said to turn off hte printer and turn back on. I did this many itmes, Print head moved fine but hte sponge on the right side was soaking with ink, apparently ink waste. I blotted it until it was fairly dry. After repeated tries I finally was able to print sometihng but then hte problem repeated itself. 2 cartridges ran out very quickly after being half full, so I knew something was wrong. I repalced both. I also unistalled the printer and reinstalled. Driver device working properly in device manger. Now when I turn on the printer, it not only flashes 4 orange lights with that annoying buzz but the printhead is now not sliding back and forth as its supposed to. Also, I was able to manually slide the printhead whne I cleaned the sponge. Now it is stuck and unmovable.
I chekced the ports and theyre connected yet I think the computer is not reading the printer because evne my laser jet which I havent used in over a year is not priniting. It did print a spec page but it doesnt print from the computer.
i unplugged computer and cables from printer to computer and then replugged. Still notihng.
Winxp
 

Read other answers
RELEVANCY SCORE 49.6

My canon i960 seems to be stuck in 'offline' status. I can't undo 'offline'.
Can anyone give me some suggestions to try?

A:canon i960 stuck in offline status

Perform the following steps:

-Click Start > Devices and Printers

-When the Device Windows opens right-click the printer icon and select See what's printing

-Click the Printer tab uncheck Use Printer Offline (if selected)

If still having problems try uninstalling and reinstalling the printer driver.

Read other 1 answers
RELEVANCY SCORE 48.8

hi guys i am back now with a small thing
i have in my office a canon ir3035n and i inserted into my pc and i didn't need any drivers as it installed itself (without internet) but the thing is all the other computers in the office have a different driver.
what do i mean as when i go into printing preferences i have nearly nothing, but all the other computers have a full program (not a actual program) with options like which drawer to take the papers to where it should come out etc. so i was wandering where could i find it i made some searches tried to install some thing like canon ir3035/3045 PS3 but the problem with this one was that it didn't print!
so please if someone could help me to find the correct printing (if possible also the scanning) driver
i would really appreciate it
thanks

A:canon printer

Did you Install any of the Drivers from the Link below ? ...
http://software.canon-europe.com/products/0010415.asp

Read other 9 answers
RELEVANCY SCORE 48.8

Could someone please tell me how to invert print with a Canon IP 1800? I'm sure there has to be an option for it somewhere but for the life of me I can't find it.

Thanks for your help.
 

Read other answers
RELEVANCY SCORE 48.8

If I receive a reply to this query that contains any "useful" info, I'll be pleasantly surprised. My OS is Windows 98. Several days ago I had installed a Canon BJC 620 printer. The appropriate driver was installed. I've been using it and it has been printing without any problems. Went to print tonight and it wouldn't print at all. Opened the Control Panel, went to printers, and the printer isn't there! The only icon in the box is the one that says "Add New Printer." Went to "Add New Hardware" to reinstall printer. My printer is not in the list provided. Am using a parallel port. Can anyone tell me, step by step, just how to install this printer? Does anyone know what in the world caused the printer to just disappear as if it had never been installed in the first place? Like I said, I really would appreciate any help anyone can provide, but I'm not holding my breath. Thanks.
 

A:Canon BJC 620 printer

Not exactly a positive attitude you have there. Have you checked the usual like the attachment of the printer cable and power plug? In Device Manager under ports is the LPT port listed as working?
 

Read other 1 answers
RELEVANCY SCORE 48.8

i recently installed a new canon pixma mp130 all in one.since install my windows defrag. program will not work,aldo any third party defrag programs either.regseeker 1.45 will not load or loads very very slowly.worst of all i can only shut down computer via switch on box.system is pentium 4 3.4ghz ht.512 mb ddr ram and was working with zero faults till addition of printer software.i have reformatted and carried out total reinstallation but to no avail.any ideas please.

A:canon printer

If you let the auto install do the installation of the printer, that could be the problem. Canon has had some problems with the auto hardware install.

Read other 3 answers
RELEVANCY SCORE 48.8

Hi, I have a Dell Inspiron desktop that's 3 yrs old and my new canon printer is connected via USB cable. I just bought a Lenovo laptop to which I connected the printer via wi-fi. I've also downloaded Win 10 recently. My problem is I can't get my printer to work thru my desktop. I can print thru my laptop but not my desktop. Could the problem be that the printer is connected thru the USB cable for the desktop and the wi-fi for the laptop? Thx for the help
 

Read other answers
RELEVANCY SCORE 48.8

Ive got a MP540 and for some reason when i print something it wants to print from the rear paper feed as opposed to the much easily accessible paper tray at the bottom of the unit. Is there anyway I can stop the printer from wanting to print via the rear paper feed

thanks
 

A:Canon MP 540 printer

Did it come with control software that allows you to configure the printer via the PC, through the properties of the printer?
 

Read other 3 answers
RELEVANCY SCORE 48.8

I have a Canon MP 830 printer. It had been working fine, but one day the printer would not turn on. I checked the power cord and it works. Any ideas? Is there an internal fuse or breaker that could have tripped?
 

A:Canon MP 830 Printer

Moving this to hardware.
 

Read other 1 answers
RELEVANCY SCORE 48.8

I have a i80 printer it says you can plug a mobile in to send pics to printer, is this correct, also where do I buy this from and also do I need the av/dc lead to go into the i80 printer.

Another I have a canon lide60 scanner, what do I install to make the pics come up on screen.

Read other answers
RELEVANCY SCORE 48.8

I have a macbook OS 10.10.5 Yosemite Can a PIMXA MG2500 Canon printer be connected to it?
 

Read other answers
RELEVANCY SCORE 48.8

My MX 870 printer is not printing. The item are backing up in the queue. (the WiFi light is on , if that means anything) I recently added a second computer, (lap-top), in a network.

HELP

A:Canon MX 870 Printer

Hello and Welcome to TSF!

I wonder if you have an Auto IP or DHCP setup for this printer. This need to be a Fixed IP, any wireless device with Auto IP assigned is not recommended.

See if the Printer IP matches with the wireless computers in your network, click on Start=> Printers and Faxes or you may also find this from Control Panel. Locate the Canon printer, right click on it, go to Properties, Port Tab and in here you shd be able to see the IP Address. From the Canon printer, look in the Menu Setting, under Network or TCP/IP setting to locate the IP Address, make sure it's on Static and the IP matches the IP in all computers in your network.

Read other 1 answers
RELEVANCY SCORE 48.8

I regret posting a second time, but somehow a post intended for the OS group landed in Hardware, which caused my question to be closed.

With my Dell Dimension 4550 I tried to install my 3 year old Canon BJC 5100 but the CD fails installation as incompatible with XP. I went to the Canon site thinking I needed a new driver but could not find one for this model, so I wrote Canon and got a response that this model is not supported for XP.

Since I am unable to install from the CD, can anyone suggest a way to install my printer???
 

A:XP & Canon printer

Unless Canon updates the driver and software for the printer you will not be able to use it, unfortunately.
 

Read other 1 answers
RELEVANCY SCORE 48.8

I have a Canon BJC-6000 printer. It is beeping 8 times telling me that the waste tank is almost full! I have opened the machine and have found the waste tank. Now I need to clean or replace the 'tank' and reset(?) the beeper (counter?). Can anyone help me. (PS I am already in contact with Canon, don't refer me there.) Thanks, .....John
 

A:Canon Printer

Waste Error Reset:
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7: Press Power to set data
 

Read other 2 answers
RELEVANCY SCORE 48.8

Appreciate some assistance.

This is one question Canon will not like.

Have two printers, a Canon BJC 2000, and a Canon BJC 250.
Use bulk black ink to refill the Canon BJC 2000, and was wondering whether the same ink could be used to refill the BJC 250. Do printers normally use "specific" ink for their make and model, or would any black bubble-jet printer ink be OK?
 

A:Ink for Canon Printer

Read other 11 answers
RELEVANCY SCORE 48.8

A friend has a new 64 bit Win 7 computer and an "older" Canon BJC 250 printer that she wants to be able to use just as she did with XP. It connects with USB and Win 7 recognizes the connection but the printer does not show up anywhere, such as on Devices and Printers page. I have dowloaded the Canon driver but am stymied at that point. Suggestions and help appreciated.

A:Canon BJC printer and Win 7 64 bit

I've looked at Canon's driver page for the BJC-250 and unfortunately that model is not supported on windows 7, nor is it supported on Windows Vista. The last driver that Canon released for that model was for Windows XP in 2003 and that definitely won't work on Windows 7.

Canon have evidently decided that the BJC-250 is too old for them to spend money writing new drivers for it. This is not unusual as other device manufacturers have also done the same with some of their discontinued models.

So if, as you say, you've already downloaded a driver for it I'm puzzled as to where you got it from.

The bottom line is that you'll have to buy a new printer for Windows 7.

Read other 3 answers
RELEVANCY SCORE 48.8

Is it possible to get longer use out of cartridges for the lowly BJC-2000SP (black and colour) and BJ-30(black). Mine run out almost straight away. I've tried what the manuals say about draft mode and speed settings.
 

A:canon printer

Read other 8 answers
RELEVANCY SCORE 48.8

I need complete help setting up my printer. Can someone please walk me step through step please?
 

Read other answers
RELEVANCY SCORE 48.4

With a Canon MG5430 (might be MG5420 or 22 in the US), on my desktop, only the calendar print is available in My Garden menu. My laptop lists all of the functions being available. The desktop was an upgrade to Windows 8. Could this be a Windows driver problem? If so, what are possible solutions? Thank you.

A:Canon Printer Problem

What OS does your laptop use currently?

Read other 1 answers
RELEVANCY SCORE 48.4

I have Canon MP160 printer connected via USB port. Turning on printer it has been installed, but printer does not working. Using Microsoft Office 2007 Word and choosing this printer, status of this printer is inactive.

I try with driver downloaded from Canon web page, but I did not resolve the problem. Do anyone have some god advice on this issue?

A:Canon MP160 printer

Solution

On notebook's manufactor home page dowload USB Driver and installed it.

Now it works OK.

Read other 1 answers
RELEVANCY SCORE 48.4

I have a canon D760 xerox printer and my boss wants me to clean the fuser. Couple things, I dont know what the fuser is or looks like,( went online to look, but still a little vague ) and when i find it how do i clean it? I been looking for documentation online, but I couldnt find one for this brand of printer. Plus they tell you you need all these tools to clean it, is this nessecary?
 

Read other answers
RELEVANCY SCORE 48.4

just bought a canon pixma mp600,installed all software which is recognised,but will only print on plain paper once then stops,wont do glossy or the disks,will print test page and from notepad,sometimes prints a bit then spits it out,have changed paper settings and am well confused,have uninstalled and reinstalled all software and rebooted over and over,any sugestions???? thanks liz.
 

A:canon printer problems,

Read other 6 answers
RELEVANCY SCORE 48.4

I am trying to set up this printer under WiFi but installation of MP driver comes up as a failure with error code 0200 0000. Can anyone help?
 

A:Canon MP495 Printer

what windows version are you setting up on ?

have a read here
http://forums.techguy.org/windows-7/959208-solved-computer-sees-my-printer.html
 

Read other 3 answers
RELEVANCY SCORE 48.4

It's old - so am I. My i905D should be capable of working without a pc. Cartridges OK, sounds normal, drives paper through as if printing bu sheet remains blank. Head cleaned, removed and cleaned. It happened in the middle of printing page of text. Nozzle check not printing. It has printed part of a page from time to time but mostly nothing. Perhaps we've been together too long.
 

Read other answers
RELEVANCY SCORE 48.4

Do you know where to get drivers for WIN 7 for the printer Canon iR1024i ?
Thank you

A:drivers for printer Canon

If W7 doesn't recognise it then use the latest driver from Canons website, even if all you see on offer is for Vista... I've installed W7 a couple times for people with Canon hardware and W7 has automatically installed perfectly good drivers by itself...

Read other 1 answers