Over 1 million tech questions and answers.

Driver State Power Failure

Q: Driver State Power Failure

I have a 5 month old Lenovo Thinkpad, Win 32, Vista Basic, SP2 with all updates done. It and a desktop operate on my wireless private home network via a Linksys WRT160N router. On Oct. 2 I added a 1TB My Book World Edition as an auto backup drive and installed Western Digital software on the laptop only. My Book is connected via USB cable to the router. So far, the laptop isn't correctly loading or recognizing or connecting with the Western Digital drives, so no backups. While I'd like to solve that problem, the BSoD is first priority and may be related to the WD install.

I'm unclear about the connection between the events because the first mini dump was Sept. 29, before the WD install. Since Oct. 22, there have been frequent unexpected shutdowns, usually while the laptop is asleep. At various times my apps software has frozen (Word, Outlook) and the shutdown cycle then takes about 10 minutes. The script when recovering from an unexpected shutdown on Oct. 28 was:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 00000004
BCP2: 00000258
BCP3: 84152D78
BCP4: 00000000
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini102809-02.dmp
C:\Users\Jim\AppData\Local\Temp\WER-114769-0.sysdata.xml
C:\Users\Jim\AppData\Local\Temp\WER2847.tmp.version.txt

Read our privacy statement:
http://go.microsoft.com/fwlink/?link...3&clcid=0x0409

I have attached a record of the minidumps and the perfmon.exe folder as requested from others. My tech skill level is low to moderate. Can you help?

RELEVANCY SCORE 200
Preferred Solution: Driver State Power Failure

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Driver State Power Failure

Hello JimPA and welcome to TSF!

You may try these:

1.) Restart your computer Tap F8 and select Last Known Good Command Config and see if everything goes back to normal.
2.) If No. 1 is unsuccesful try uninstalling the WD software
3.) Do you have the 1 TB backup hooked up to your laptop? Unplug it
4.) Maybe you'll need your RAM upgraded
5.) If none of these works, since it's only 5mos old, it's under warranty, I would contact Lenovo.

Read other 7 answers
RELEVANCY SCORE 88

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 88

Hey, I got some BSOD problems. Do you got time & experience to help me?

I got Windows 8 at the moment, I will install 8.1 shortly. Had 8.1 before i re-installed OS when the first BSOD showed up, so I doubt that 8.1 will fix things completely.

My problems ATM!

- Driver Power State Failure
- Video TDR Failiure (nvlddmkm.sys)
- Screen freezes at start up or when I get to the desktop
- Have to Disable my NVIDIA GeForce GTX 675M to use the CPU (Windows has stopped this device because it has reported problems. (Code 43).

Got two other kinds of BSOD before I re-installed windows but don't remember what they said, I just felt like "Hey I need to re-install my OS anyways so w/e". But apparently that didn't solve the problems.

I also gained "NVIDIA Windows Kernel Mode Driver, Version 340.52 stopped working While playing CS:GO" but that was before I re-installed windows. And now to use my CPU I need to go into Device Manager and shutdown my NVIDIA card to be able to use the CPU and use the Intel card instead. If I don't shut it down my CPU will freeze the screen for days, til I restart or I get a BSOD.

I will buy a can of air and open up my laptop and blow some dust away, perhaps that could help? Perhaps the NVIDIA card is burned/broken and I have to buy a new PC?

I've tried a few different driver for my NVIDIA card also, nothing works.

I'm no computer expert and thats why I'm here begging for help, so if someone could help me out here I would appreci... Read more

A:Driver Power State Failure,Video TDR Failure(nvlddmkm.sys)

Hi Markmsigt60 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Fri Sep 26 06:15:51.972 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\092614-55906-01.dmp]

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows 8 Kernel Version 9200 MP (8 procs) Free x64

Built by: 9200.16912.amd64fre.win8_gdr.140502-1507

System Uptime: 0 days 0:07:07.738

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Probably caused by : ntoskrnl.exe ( nt+5a540 )

BugCheck 9F, {3, fffffa800892b880, fffff8800326a7f0, fffffa80089c3e10}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800892b880, Physical Device Object of the stack
Arg3: fffff8800326a7f0, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: fffffa80089c3e10, The blocked IRP
BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: WRONG_SYMBOLS

CPUID: "Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz"

MaxSpeed: 2400

CurrentSpeed: 2395

BIOS Version E16F3IMS.50R

BI... Read more

Read other 3 answers
RELEVANCY SCORE 88

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 85.6

Hello,

I would appreciate any help with the following problem: the pc sometimes seemingly randomly shows BSOD with errors named in the title, I also attach corresponding screenshots. The problem wont happen if the PC power is supplied from the adapter AND there is some content running on the screen (video in VLC f.ex.). Other important symptoms are: Can not turn off the laptop. There will be endless blue screen saying shutting down,while PC already stopped working. I also can not get the PC to sleep. If i I go to sleep mode, display turns black, PC is still working on and on and I can not go back to desktop anymore.

Thank you very much for your help.

Ales

Read other answers
RELEVANCY SCORE 85.2

Hi all, this is my first time here, and I need some help.

I'm using an Asus G71GX gaming laptop running Win7 Pro x64, and randomly my computer will just BSOD on me, and reboot. The minidump is too fast for me to read much past the first few lines, so I don't know entirely what's to blame. When it restarts, a dialogue box comes up saying "Windows has recovered from an unexpected shutdown". When I click on the more info tab, this is the information it gives me:


Quote:




Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80063A8620
BCP3: FFFFF80000B9C4D8
BCP4: FFFFFA800BA8E190
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\091910-19484-01.dmp
C:\Users\Mike\AppData\Local\Temp\WER-42135-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?link...8&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt





Also, when I wake up my computer from sleep, sometimes it doesn't recognize my speakers, and no audio comes out either from my speakers or headphones. If I put my computer to sleep and wake it up again, they're recognized a... Read more

A:Driver Power State Failure

Hi -

Please follow these instructions --> http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 17 answers
RELEVANCY SCORE 85.2

I just bought a new ASUS E200HA, and I keep having issues with certain aspects of it, so I tried to reset my computer back to factory settings. Instead of it resetting and restarting, I get the notification of a driver power state failure. Its on Windows 10 as well. I am getting frustrated and want to just reset my computer. Help!
 

Read other answers
RELEVANCY SCORE 85.2

Hi
I have just upgraded from windows XP 32 to window 7 64
My cursor is really jittery and typing is delayed
if I leave my computer and it goes idle then i get the blue screen and one of the messages is 'driver power state failure'
I've got the dmp files zipped and attached to this thread
I suspect that I need to remove or update a driver?

Not sure if this is helpful or not but I have pasted the results of a WhoCrashed test

any help would be greatly appreciated
thanks
Tim

On Mon 5/30/2011 9:49:09 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\053011-47315-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7FD00)
Bugcheck code: 0x9F (0x3, 0xFFFFFA80164EE050, 0xFFFFF80000B9C518, 0xFFFFFA800B946850)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
 

Read other answers
RELEVANCY SCORE 85.2

Does anyone have any suggestions for the following issue:
 
http://www.bleepingcomputer.com/forums/t/588804/driver-power-state-failure/
 
Thank-you.
 
 

Read other answers
RELEVANCY SCORE 85.2

Hey i have a problem with my toshiba satellite it does not boot up correctly when i start the computer it takes long time than usual and also after it starts the windows 7 wallpaper comes and normally there is a log in button to log into my pc but now theres no login button its only the normal windows 7 wallpaper.
Well One night i was using the computer and i was using speed up my pc and playing games and it got very slow and it got a lot stuck so i had to force it down and after i start it up again it says the computer was unable to boot properly and stuff but after that i have tried few stuff and now no error comes up but it does not start correctly i have no way on going into my computer.
The stuff i did was i tried sfc and it was not able to fix the problems it said check the cbs file or something for the logs of the errors and also before the errors come up but after i did all four of these no errors come it starts but no login button only windows 7 wallpaper this is what i tried doing
type > bootrec /fixmbr
type > bootrec /fixboot
type > bootrec /scanos
type > bootrec /rebuildbcd
Those four i tried.

Like i just told i tried all those four options of bootrec and it made the computer boot up but only the windows 7 wallpaper is there when it should be the windows 7 wallpaper and a log in button but the login button is not there i can post pictures if needed.

Startup repair could not fix the problems.
Sfc could not fix the problems.
Bootrec c... Read more

A:Driver Power State Failure

I get a Driver_power_state_failure with a stop : 0x0000009F(0x00000004,0x00000258,0x8658F020,0x8397CB24)

Yesterday i was working with my computer and i was running a game and fix my pc and it was very slow it got stuck and i forced it down and when i start the pc i get that error.

I have tried sfc and bootrec and startup repair none of them can fix the problem it says unable to fix the problem.
I also have the recovery disk and can view the hard disk files and also use cmd but i tried the startup repair and it could not fix the problem.

Please help here is few pictures:

Read other 8 answers
RELEVANCY SCORE 85.2

Hello I m using Intel base pc but after installation of windows 8 I m facing a problem......
when I start my pc after boot it's show blue screen " power driver State failure" what is men pleases help me any one my system configuration is below and I am put the link of my sky Drive there is Minidump File and System Information

Main Board Intel Dx58so
Prosser Core i7 930
Hard Disk 160 GB WD
320 GB W
VGA ATI 4650
WIFI TPlink TL-722n

SkyDrive Link

https://skydrive.live.com/?cid=a3c35...2101E1D%211904
Download the file and tall me what I do after show Blue Screen "power driver State failure" I update my WIFI Driver but doesn't work pleases help me thanks
Goher Altaf

Read other answers
RELEVANCY SCORE 85.2

For some reason whenever i do something that uses my graphics card i get a BSOD. I disabled it to confirm that it was indeed causing me issues.

Ive reflashed the bios, updated the driver, rolled it back and even did a complete reinstall to factory settings.

I upgraded to Windows 10 as well to see if it would fix the issue but it has not done anything.

The graphics card is a GTX 670m.

Edit: Sometimes i will get the BSOD doing normal things such as browsing or even being on the desktop.

Thanks

A:Driver power state failure.

The latest dump indicates a problem with nvlddmkm.sys:

Code:
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
The driver is old: Tue Aug 28 03:52:38 2012

According to the output of dxdiag, you have a Intel(R) HD Graphics 4000.
You also have a NVIDIA GeForce GTX 670M but it doesn't appear to be the active video card. Update that driver to the latest WHQL version which is 368.39.

Looks like the Intel is onboard and the Nvidia is a PCI-E card.

Read other 1 answers
RELEVANCY SCORE 85.2

I periodically get a driver power state failure BSOD. It's happens about once a week or so.

Relevant files attached.

A:Driver Power State Failure

Check your post again, as there are no files attached.

Also, fill out your system specs. Click on the link in my signature to do it.

Read other 5 answers
RELEVANCY SCORE 85.2

Every now and then my laptop bluescreens and I get this error.  Does anybody know how to fix it?
 
 

A:driver power state failure

Hi
 
 
We need to collect some basic info to analyze and find the reason behind the crashes. So please follow the below steps.
 
Upload the crash dumps for analysis
 
Open C:\Windows\Minidump folder. Copy and  zip the entire contents of that folder and upload to any free file hosting site of your choice. You may have to disable User Account Control to copy them.
 
  Example file hosting sites :
 
  https://www.box.com/
 
  http://www.mediafire.com/
 
  http://www.sendspace.com
 
Post the download link to the dumps in next reply.
 
 
A Speccy report about your system
 
  Generate a report about your system using Speccy by reading the guide below. Make sure to run the Speccy after running the system about one or more hour. This will give us an indication of current CPU -GPU temperature status.
 
   http://www.bleepingcomputer.com/forums/t/323892/publish-a-snapshot-using-speccy/
 
 Post the web link displayed by Speccy in next reply.
 
A Minitoolbox log
 
  Download Minitoolbox from the below link.
 
http://www.bleepingcomputer.com/download/minitoolbox/
 
 
  Run the tool and only select the following tick boxes.
 
    -List last 10 Event viewer errors
    -List installed programs
    -List devices
    -List users, partition and memory size
 
Now click "Go" and post the output... Read more

Read other 12 answers
RELEVANCY SCORE 85.2

So I have an Asus ROG laptop and I've recently started having some issues with it, one of them being this driver state power failure bsod. Its happened 3 times now in the past two weeks.

I haven't exactly nailed down what causes it, but I've done some research and most places suggest updating drivers and BIOS to fix it.

The first issue I'm having with this is that I'm unable to update my BIOS. I've got the file downloaded from the Asus website, I put it on a flash drive and tried to use the EZ Flash 3 utility to update the BIOS but it doesn't see the flash drive. In fact it doesn't see any drive at all except for one 256 MB partition on the main hard drive (laptop has an SSD and 2nd hard drive for storage). I've tried formatting the drive in FAT32 as old documentation suggested it might need that but still no luck. I've tried several flash drives and no luck. I read that USB 3.0 might be the problem, but the laptop only has 3.0 ports. So not sure what I can do about that if that is the actual problem.

Some other additional information, a few days ago I noticed my power brick for charging the laptop got extremely hot as it was under some blankets and such. How long that was going on I don't know. Could the charger be the problem? When it BSOD'd a couple hours ago it was shortly after I unplugged it (30 seconds-ish). But this did crash before I noticed the power brick issue so I don't know if its been a thing for that long or not.

Also I did update my video card... Read more

A:Win 10 Driver State Power Failure

Hi. . .

I definitely need the minidumps to see if they yield any clues. Most 0x9f bugckeck BSODs (DRIVER_POWER_STATE_FAILURE) that I see typically involve networking drivers. But not all of them.

The title of the 0x9f BSOD is misleading and confusing. It has nothing to do with power bricks getting too hot because of blankets; nor the system being unplugged and running on battery power; probably not the video driver -- but I have seen video drivers involved in 0x9f BSODs.

Hopefully the memory dump(s) will tell us the driver that is responsible for your BSODs - assuming that your BSODs are software related and not the result of hardware failure.

Run the app in these instructions. It will copy the dump(s) and generate about 25 system reports that are helpful to me.

Blue Screen of Death (BSOD) Posting Instructions - Windows 10, 8.1, 8, 7 & Vista

However, before you run the BSOD Instructions app, I want you to run Driver Verifier first -

Driver Verifier - Windows 10, 8.1, 8, 7 & Vista (BSOD-related)

Let it run in the background for at least 24 hours. If a BSOD occurs while running Driver Verifier, then run the BSOD Sysnative/jcgriff2 app (per step 1) and attach the zip file to your next post. If no BSODs after 24 hours, then run the BSOD app.

The dumps are filled with a lot of spacing and nulls, so they compress greatly. A 1 GB "mini dump" is more the norm these days as each version of Windows adds more to the dumps to help the BSOD A... Read more

Read other 7 answers
RELEVANCY SCORE 85.2

Sorry I have NO CLUE but I keep getting that DRIVER_POWER_STATE_FAILURE also. I have no idea what to do or how to do anything! Can someone email me on what I should do because I wont know how to get back here (sorry)
thank you
[email address removed]
 

A:Driver power state failure

Have you updated any drivers lately?
 

Read other 1 answers
RELEVANCY SCORE 85.2

I just tried to restart my laptop and it took like really long to restart .. basically it was stuck at the "Restarting blue'ish screen" and after a while displayed some texts like "collecting info ....... Driver_Power_State_Failure"

After googleing a bit, it seems lots of people suggests its likely being caused by a damaged/outdated driver or something similar but I checked the device manager and I don't have any errors/yellow sigh anywhere and also tried checking updates for Ethernet/wifi adapters etc .. it just says I already have the latest version.

I've installed a few new softwares on pc recently but I'm don't think these can actually cause this issue, itunes latest version and a virtual wifi router: this one: https://virtualrouter.codeplex.com/ (don't know if I should link it here but incase it helps)

Also I don't think I've any virus issues, running comodo + maleware bytes ... so far no detection's.

Any advise how to fix it?
OS: Win 8.1 64bit

System config
--------------
Asus X555LF
Intel? Core? i3 5010U Processor
DDR3L 1600 MHz SDRAM 8GB
NVIDIA? GeForce? 930M with 2GB DDR3 VRAM
1TB HDD

Read other answers
RELEVANCY SCORE 85.2

Wondering if anyone can help. About 1x/week I'm getting a blue screen that says I have a Driver Power State Failure. I really don't know what to do even though I have read up a little on it.

Anyone have any suggestions on how I can get started fixing this?

A:Driver Power State Failure??

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

Read other 9 answers
RELEVANCY SCORE 85.2

I'm using a Toshiba Satellite S55-C5363 and I have been semi-frequently getting BSOD due to "Driver Power State Failure." This usually happens when I try to run software that is somewhat graphically intensive, such as solidworks or photoshop. In either case, they run for a period of time (sometimes long, sometimes short), and then I encounter the bluescreen. I believe my computer has a good enough specs to run this software. Either way, I don't think my computer should be crashing.
I have malwarebytes installed and am currently running a scan. I just installed bluescreenview. Let me know if I should download any software and attach any logs. Attached is a log from speccy.
Thank you.
 

Read other answers
RELEVANCY SCORE 85.2

Someone help me with this computer failure. See attached computer dump.

A:Power Driver State Failure

Hi, welcome to the forums You may need to post at our BSOD forum :-

BSOD, App Crashes And Hangs - Tech Support Forum

However as your error sites Ntoskrnl.exe and this is generic (probably not the cause) it may be a simple ACL's problem (many are) so run a chkdsk, in safe mode, cmd prompt, chkdsk/f

Read other 1 answers
RELEVANCY SCORE 85.2

In the last few weeks I've been getting stuck and when rebooting I get a blue screen and minidump w/Driver Power State failure. Please help? I've done PERFORM/REPORT and attached.

A:Driver Power State Failure

Hi -

There are no attachments to your post.

Run Driver Verifier - http://www.techsupportforum.com/f217...ed-473665.html

Provide full system info - http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 2 answers
RELEVANCY SCORE 85.2

A couple of days ago I did a Windows 10 64-bit "clean install" on my Dell Inspiron 1564 Laptop, and it has been running well, basically. However, I did experience a Driver Power State Failure on startup today. It immediately reached 100% complete in collecting error info, but did not restart after (as it said it would). I waited for approximately 10 minutes more and then manually rebooted. It came up fine.

Going forward, I am not sure what I should be doing to correct the situation. If someone has recommendations, I would be appreciative.

By "clean install", I mean I upgraded from 7 to 10 - then I did a computer recovery - reset this pc, at which time I told it to remove all my personal files and applications. I think I have 4 GB of ram, but quite frankly, the system information screen has changed; and even digging into the Device Manager information leaves me no less confused about what is installed. So I hope this is enough of the basics for someone to give me a basic next step.

Thank you,
Minderbinder

A:Driver Power State Failure

If it doesn't pop back up, I wouldn't worry too much about it. Sometimes drivers can fail every once in a while.

Read other 1 answers
RELEVANCY SCORE 85.2

First off, i have an acer aspire VX5-591G
-Intel i7-7700HQ
-16gb RAM
-1tb harddrive and 256gb ssd
-Nvidia GTX 1050
-Windows 10 home.

So i have had this problem for months now,
and i'm out of ideas.
Every time i close a program with task manager or the program doesn't respond,
after a few seconds i get blue screen with driver power state failure.

And that's just the first problem.

It is in dutch but it says: u need permission from 'laptop' to make changes to this map.

Anyone please help me!!!
Thanks!!

Verzonden vanaf mijn iPhone met Tapatalk
 

Read other answers
RELEVANCY SCORE 85.2

Turning on the computer or after some time of use sometimes gives the BSOD power_driver_state_failure. after resetting it usually enters the windows. Could anyone help me with this problem?

A:Power Driver State Failure

Update drivers in red. Run System File Checker. Remove Alcohol 120 and/or Daemon Tools if using them.

Code:

HECIx64.sys Thu Sep 17 21:54:16 2009 (4AB293E8)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

NTIOLib_X64.sys Wed Oct 20 08:45:49 2010 (4CBE901D)
MSI Afterburner driver (known BSOD issues with Windows) Also found to be a part of MSI Live Update 5[br][br]Recently (Nov 2014) there have been numerous instances of this driver in memory dumps. Analysis reveals that they are scattered throughout the filesystem by the installed MSI command utilities. For now I suggest uninstalling them all.
http://www.carrona.org/drivers/driver.php?id=NTIOLib_X64.sys

Rt630x64.sys Fri May 10 11:59:08 2013 (518CC4EC)
Realtek PCI/PCIe Adapters
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

agp440.sys Thu Aug 22 13:39:35 2013 (5215F877)
Intel AGP Bus Filter
http://www.carrona.org/drivers/driver.php?id=agp440.sys

nv_agp.sys Thu Aug 22 13:39:38 2013 (5215F87A)
NVIDIA nForce AGP Bus Filter
http://www.carrona.org/drivers/driver.php?id=nv_agp.sys

RTKVHD64.sys Wed May 14 12:28:52 2014 (53734564)
Realtek High Definition Audio Function Driver
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys

nvhda64v.sys Mon Jul 21 16:17:53 2014 (53CD2111)
nVidia HDMI Audio Device (nF... Read more

Read other 7 answers
RELEVANCY SCORE 85.2

my OS - XP pro SP2

Every time I try to shutdown my computer a blue screen appears:

Driver_Power_State_Failure
. . .
. . .
Stop (0x00000500 0x00000002 0x(changes every time) 0x81AF3E30).

Can someone Please advise ?

Read other answers
RELEVANCY SCORE 85.2

Hi i juz had a problem recently with my new dell laptop xps1530. for a few times it had shut down automatically when i'm not using it. it stated tat it had driver power state failure which i cant figure out after looking at all the posts here. this is my dump files below....

pls help!!
 

A:Driver Power State Failure

I have seen a lot of similar "Power State" failures on computers using wireless when returning from sleep or idle.

Your minidumps, which are all the same as below, seems to confirm this >>

Debug session time: Wed Jun 17 14:49:34.117 2009 (GMT-7)

BugCheck 9F, {3, 8511bd50, 852aa030, 868c5c40}

Unable to load image \SystemRoot\system32\DRIVERS\CnxTrLan.sys, Win32 error 2
*** WARNING: Unable to verify timestamp for CnxTrLan.sys
*** ERROR: Module load completed but symbols could not be loaded for CnxTrLan.sys
Probably caused by : CnxTrLan.sys (>> USB Wireless >> Conexant?)Click to expand...

http://www.google.com/search?client=opera&rls=en&q=CnxTrLan.sys&sourceid=opera&ie=utf-8&oe=utf-8

I would try updating the wireless drivers, if one is available, or get something from a different vendor.

A removal and reinstall alone may also just work.
 

Read other 3 answers
RELEVANCY SCORE 85.2

Hello,

I just got a Driver Power State Failure Bsod. Please find attached the dump files. Any help would be greatly appreciated.

Edit: Event Viewer called up 'CtHdaSvc.exe' which is the SB Recon3D Service.

Checking Gigabyte for an update to the audio drivers.

Edit: No new driver on the Gigabyte site. Will reinstall.

A:Driver Power State Failure

Hi brouhahaha,

The Asmedia 106x SATA controller driver has caused the crash.
As a bluescreen crash happened only once, I wouldn't be worried too much about it.
Windows resolves bluescreens that only onces happened.

Code:
0: kd> !irp ffffe001eed11b40
Irp is active with 6 stacks 4 is current (= 0xffffe001eed11ce8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe001ee8336e0 00000000 fffff8011a7d8bd0-00000000 Success Error Cancel pending
\Driver\pci storport!RaidAdapterPowerUpDeviceCompletion
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 ffffe001eeec7050 00000000 fffff8001b92ed78-ffffe001eed12c70 Success Error Cancel pending
Unable to load image asstahci64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for asstahci64.sys
*** ERROR: Module load completed but symbols could not be loaded for asstahci64.sys
\Driver\asstahci64 nt!PopRequestCompletion
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe001eed12c70
Arg... Read more

Read other 0 answers
RELEVANCY SCORE 85.2

Hi, Getting this blue screen error quite alot now, multiple times a day.
I know its quite a common error, I am running Windows Vista Home Basic SP2 on a ACER Aspire 5738. Dual core processer @ 2.0 GHz .32 Bit.
Heres some details about the error.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 6153

Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: C12630A8
BCP3: BF65BB78
BCP4: BF65B874
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini041911-02.dmp
C:\Users\ganly\AppData\Local\Temp\WER-350362-0.sysdata.xml
C:\Users\ganly\AppData\Local\Temp\WER8297.tmp.version.txt

HELP WOULD BE MUCH APPRECIATED, THANK YOU.

A:DRIVER POWER STATE FAILURE

I'm not allowed to attach the dump file, and i cannot locate the other two files in the temp folder.

Read other 5 answers
RELEVANCY SCORE 85.2

Hey all,

I just put Windows 8 Professional 32-Bit on my Gateway M100-E laptop. It seems to crash when it is restarted and it's power state has changed. As in from battery to power cord and vice-versa. The BSOD tells me the error is called a driver power state failure. This laptop is 100% stock with the latest Windows 8 updates. The antivirus I'm using is the included Windows Defender and Windows Firewall. Attached are my log files.

A:Driver Power State Failure

First of all

update this driver

Intel Raid StorPort Driver

Intel Download Center

Read other 4 answers
RELEVANCY SCORE 85.2

Running an HP Quad Core with Vista Home Premium SP2. The last two months I've been getting BSOD's on hibernation. Error message indicates it a DRIVER POWER STATE FAILURE.

I've updated all drivers and uninstalled software added just before the first BSOD, with the exception of Skype. Attached a .zip with the last four MiniDump files. I've tried analyzing them with Windbg, but I can't get the symbols to load properly.

Any assistance would be greatly appreciated.

A:Driver Power State Failure x9F

Hello and welcome to TSF.

It's not just you that can't get the symbols to load, they aren't loading for me neither. Where is the OS from? There's no Built by: line, either...

Read other 14 answers
RELEVANCY SCORE 85.2

Hi all,
Recently my Windows 7 Pro 32-bit computer I built with an ASUS board started blue-screening on entering sleep mode. It also usually won't shut down properly. I'm getting a Driver Power State Failure bluescreen, stop 0x0000009f. Any help in resolving this would be appreciated!

A:Driver Power State Failure

Please provide this information: http://www.techsupportforum.com/f217...ns-452654.html

Read other 3 answers
RELEVANCY SCORE 85.2

I keep getting a BSOD upon getting back onto my computer after it hasn't been used for a while (I just leave it on all the time). I checked around on the Microsoft home site and I'm reading that it might be an issue with using IEEE devices and that I should download a new service pack or something. I was looking around elsewhere and other people are saying that it might be an issue with the hd, and that I need to backup all my files and recover it before it fails.

Do you guys have any suggestions on how to deal with this issue?

Thanks
 

Read other answers
RELEVANCY SCORE 85.2

Hi
I've been getting this BS error for quite a while now and it is becoming more frequent so I've decided to take action. I have no idea what?s causing it but it happens when I try to put my laptop into hibernate - sometimes it happens when the laptop is idle. The Vista report (below) tells me that there is a solution available which is great but it doesn't tell me what that is. I have no idea what the 3 files mentioned are or how to find them. I have run CHKDSK but it didn't find any issues though maybe I missed something. I have also updated all my drivers from Device Manager but it tells me that everything is up to date.
I have the date from the first shutdown. Is there anyway from that that I can see what was installed on that date that may be causing the problem? There is nothing close to that date that I can see in Control Panel.
My laptop is an ASUS M51Sn running off Vista x32 which was preinstalled and is about 3 years old. I have attached the files as per the BSOD guide.

Thanks in advance


Product
Windows

Problem
Shut down unexpectedly

Date
28/05/2011 19:24

Status
Solution Available

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 6153

Files that help describe the problem (some files may no longer be available)
Mini052811-02.dmp
sysdata.xml
Version.txt

Extra information about the problem
BCCode: 116
BCP1: 9EDC1008
BCP2: 90E0D880
BCP3: 00000000
BCP4: 00000002... Read more

A:Driver Power State Failure

Hi,

The camera driver (snp2uvc.sys) is blamed for this issue!


Look here & try the "Two" listed drivers: -

http://drp.su/drivers/notebooks/?v=A...Sn&id=242&l=en


USB 2.0 UVC 1.3M WebCam & USB2.0 1.3M UVC WebCam


So, give them a go & see what happens from there. OK?

Read other 6 answers
RELEVANCY SCORE 85.2

Hi Allfor the past days I've bumped into BSOD Driver Power State Failure quite a few times. All my drivers are up to date, but I suspect my BIOS not to be. My BIOS version is: CDCN26WW, 12-10-15. Could the problem be around the BIOS?

Read other answers
RELEVANCY SCORE 85.2

Computer was recently updated to Windows 8. When laptop lid is closed and opened, BSOD instead of sleep. I need to know which driver is causing it. "grab all" results attached. Thanks.

A:Driver power state failure

Welcome to Eight Forums,

Looks like a mixture of drivers from Acronis and Total Mounter seems to be the cause of the BSOD.
I would uninstall both these programs and their drivers and see if the sleep mode BSOD is eliminated.
Do you have a SSD and is the firmware for it up to date? Check for one, it may bring stability.

Code:
******************************************************************************** *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa8005c49050, fffff8033d53c7e0, fffffa8009021010}
*** WARNING: Unable to verify timestamp for KSPrt64.sys
*** ERROR: Module load completed but symbols could not be loaded for KSPrt64.sys
Probably caused by : KSPrt64.sys
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRI... Read more

Read other 3 answers
RELEVANCY SCORE 85.2

Hello,
I've been getting the BSOD for Windows 8 since I've downloaded it. I purchased the digital copy online from Microsoft, but don't have a CD to do a reinstall, and really would hope to avoid wiping all my files. Sometimes I go weeks without getting the error, but I want to fix it once and for all. It always happens upon my PC "reawakening". Attached is the most recent Minidump https://skydrive.live.com/redir?resid=12EC8E4E1EFCF023!575&authkey=!ACvFmfUZxRKkwgM
 

A:Driver Power State Failure

If you have your upgrade key you can enter it HERE and download the upgrade again. If I remeber correctly they Give the option[or did before] to put the software on a USB drive.

Read other 11 answers
RELEVANCY SCORE 85.2

i have a toshiba satellite u405d-s2874 and i was transferring files from one portable hard-drive to another and i got a blue screen with the driver power state failure on it. the laptop restarted and all and i thought that maybe it fixed itself or something like that so i contiinued doing what i was doing and now after a while the laptop goes to the blue screen with the power state failure. i searched for it on google and it lead me to a post on your site. i read it and its about the same problem cept for the power button on the harddrive thing. its happened about 3 times or so while i was trying to read the post and sign up for your site. please need some help...oh can you tell me if i made a good buy by buying a toshiba??
 

A:Driver Power State Failure

Have the same laptop and same problem. As far as I can tell it is due to a bad SD card reader driver. I downloaded the "Debugging Tools for Windows x64" from here and used it to load the memory dump file located in "C:\WINDOWS\Minidump". You can follow the description here on how to do this. The debugger identified the file "o2sdx64.sys" as the culprit so I went over to toshiba here and downloaded the latest SD reader driver. The old version of this file was identified by the device manager as 2.0.2.909 and after updating was 2.0.2.915.

I have not tested this for long but so far no BSOD. I did notice this error seemed to occur often when I was swapping files off the SD card I am hopful.

Hope this helps.

By the way I am running Vista x64
 

Read other 1 answers
RELEVANCY SCORE 85.2

We have been getting the blue screen of death very intermittently over the past several weeks and aren't aware of any new hardware or software that has been installed to cause any issue. Below is the full technical information. Does anyone know what is causing
the BSOD?
Stop: 0x0000009F (0x0000000000000003, 0xFFFFFA800423CA10, 0xFFFFF8000413D748, 0xFFFFFA80078A8CA0)
Thanks!

Read other answers
RELEVANCY SCORE 85.2

-Win 8.1, recently upgraded from 8
- x64
- Win 8 was the original OS on the laptop
- OEM, came pre-installed
- 1.5 years
- Upgraded to 8.1 about a month ago

- i7 4700MQ
- GT 750M

- Lenovo
- Y410p

-Laptop

I can't access my System Health Report, whenever I try to run perfmon/report in cmd (As administrator), I get an error message saying THE OPERATOR OR ADMINISTRATOR HAS REFUSED THE REQUEST. I can manually view the report in Performance Monitor but I have no idea how to save it from there, there is no option to save the report anyhow.

A:Driver Power State Failure

Hi. . .

BSODs appear to be related to USB, but the dumps are not giving up the 3rd party driver name.

See if Driver Verifier flags any 3rd party drivers - http://www.techsupportforum.com/foru...ed-473665.html

Regards. . .

jcgriff2

`

Read other 2 answers
RELEVANCY SCORE 85.2

Hi! I am Monjur Alahi from bangladesh. I have a HP Pavilion Notebook, recently i sufferd a problem during start up . Its take too much time display a message which is " Driver Power State Failure". How can i fix the problem with my Notebook ? Help me Please

Read other answers
RELEVANCY SCORE 85.2

I have a user whose laptop has been acting up, crashing, freezing, etc. randomly, she was only using word.

Her BSOD happened after awaking from sleep. Error message was "driver power state failure" stop: 0x0000009f (or however many zeros!). She had to pull the battery to get the laptop to restart.

I've attached the SF zip file - any help appreciated!

Thanks
erin

A:driver power state failure

Probably caused by : nusb3xhc.sys NEC Electronics USB 3.0 Host Controller Driver: Support/Design | Renesas Electronics

Update Driver: RENESAS/NEC Drivers & Firmwares

Read other 3 answers
RELEVANCY SCORE 85.2

I have a Toshiba Satellite C55T-A. Running windows 10 since December. Was running Windows 8.1 previously.  The last few days my computer has been slow to shut down and start up. A blue screen comes up saying it ran into a problem and needs to shut down.then shows this message. Driver Power State Failure. i don't know if I added what I should have. if not, you will have to tell me how to do in very easy computer ease talk.  Thanks for help.
 

 SysnativeFileCollectionApp.zip   2.61MB
  3 downloads

Read other answers
RELEVANCY SCORE 85.2

hey
Lately when ever i shutdowm my computer i eather get shutdowns taking as long as 30 mintues or a BSoD with a Driver power state Failure. Can anyone help? I have noticed that members here attached the Minidump as a .zip file, for you to figure out the problem , I dont know how to do that ..There are no other problems with system proformace. Also, when it restarts again it gives me messag that hardware ID missing, I dont know what does that mean.. shall I reformat the computer??

my PC information is
HP pavilion tx 2500
Windows Vista, SP1

looking forward to your reply and support..

A:Driver power state Failure

Please follow the directions here to upload the information that we need: http://www.techsupportforum.com/1871981-post2.html

Read other 3 answers
RELEVANCY SCORE 85.2

Hi there,
please could someone help me. My laptop started crashing a little while back after itunes updated so i uninstalled and re-installed it but things got worse an crashes were happening a couple times a day, so i decided to do a fresh windows install to try repair damaged program files. well i am still having issues not as dramatic and as often but i really want to be done with this issue asap. help would be greatly appreciated.

A:driver power state failure

Code:
avgtdia.sys Thu Aug 1 20:06:31 2013 (51FA6B67)
avgrkx64.sys Tue Sep 10 04:42:59 2013 (522E4EF3)
avgfwd6a.sys Thu Sep 26 13:44:43 2013 (5243E5EB)
avgmfx64.sys Tue Oct 1 04:49:53 2013 (524A0011)
AVG contributes to BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Code:
TuneUpUtilitiesDriver64.sys Fri May 25 16:28:19 2012 (4FBF5EC3)





Quote:
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence. If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything. 10 Tips on How to Properly Maintain Your Computer


Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Reduce... Read more

Read other 9 answers
RELEVANCY SCORE 85.2

Hello I have an issue very similar to the one in this thread:

[SOLVED] driver power state failure bsod

I have used driver verifier and caused my computer to bsod under those specific settings, here is my dump file:

Any assistance would be appreciated!

A:driver power failure state

Hi,

The attached DMP file is of the DRIVER_VERIFIER_DETECTED_VIOLATION (c4) bug check.

This is the general bug check code for fatal errors found by Driver Verifier.

BugCheck C4, {73, e, e0008000, 1000}

^^ The 1st parameter of the bug check is 0x73 which indicates that MmMapIoSpace called when not at DISPATCH_LEVEL or below.

If we take a look at the call stack:


Code:

0: kd> kv
Child-SP RetAddr : Args to Child : Call Site
fffff800`00b9c008 fffff800`02f073dc : 00000000`000000c4 00000000`00000073 00000000`0000000e 00000000`e0008000 : nt!KeBugCheckEx
fffff800`00b9c010 fffff800`02f18996 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!VerifierBugCheckIfAppropriate+0x3c
fffff800`00b9c050 fffff880`0f691c2b : 00000000`e0008000 00000000`00000001 00000000`0000003e fffff880`0f68e0e6 : nt!VerifierMmMapIoSpace+0x36
fffff800`00b9c090 00000000`e0008000 : 00000000`00000001 00000000`0000003e fffff880`0f68e0e6 fffffa80`0c7d3780 : nvlddmkm+0x1e6c2b
fffff800`00b9c098 00000000`00000001 : 00000000`0000003e fffff880`0f68e0e6 fffffa80`0c7d3780 00000000`ffffffff : 0xe0008000
fffff800`00b9c0a0 00000000`0000003e : fffff880`0f68e0e6 fffffa80`0c7d3780 00000000`ffffffff 00000000`00000030 : 0x1
fffff800`00b9c0a8 fffff880`0f68e0e6 : fffffa80`0c7d3780 00000000`ffffffff 00000000`00000030 00000000`00000000 : 0x3e
fffff800`00b9c0b0 fffffa80`0c7d3780 : 00000000`ffffffff 00000000`00000030 0000... Read more

Read other 15 answers
RELEVANCY SCORE 85.2

dear sir,

after i installed win7 64 bit, i kept facing the bluescreen, it shows "driver power state failure", my configuration is as below,

MB: Rampage III Extreme
DRAM: 12GB OCZ
OS: win7 64 bit

can you help me preventing bluescreen again?
attached is the .dmp

appreciated!!

A:driver power state failure

Hi -

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Regards. . .

jcgriff2

`

Read other 5 answers