Over 1 million tech questions and answers.

BSOD and crash during encoding with Handbrake

Q: BSOD and crash during encoding with Handbrake

I recently got into ripping Blu-ray movies and encoding them. However I have recently had a few blue screens with restarts. I use MakeMKV and it usually runs fine and doesn't give my problems. However, I have had problems encoding the MKV files with Handbrake v0.9.5. Here are my system specs:

Windows 7 64-bit Pro SP1
Intel Core i5-2500K (overclocked to 4 GHz)
8GB Corsair Vengeance RAM (Model CMZ8GX3M2A1600C9B)
ASRock Pro3 Gen3 Mobo (latest BIOS update 2.30)
Mushkin Chronos 120GB SSD
Seagate Barracuda 1TB HD
Nvidia GTX 560TI graphics card (slightly overclocked,can't remember speed)
Cooler Master Hyper 212+ CPU cooler

The case also has plenty of fans (7 to be exact). 2 intake fans in the front, 1 intake in the side, 1 intake on the front of the cooler, 1 outtake on the rear of the cooler, and 2 outtake on the back and top. So the tower is staying cool. I'm running AXTU Hardware Monitor during the encoding and temps are staying steady around 50C, which I've heard are normal. The encoding is about 50% now and so far no crashes or spikes in temperature.
I thought the memory may be the culprit and I ran MemTest86. It returned one error after a few hours of running. I have not taken the RAM out to test each module or clean the slots. The timing is set at 9-9-9-24 and I dialed down the speed to 1333 from 1600.
That's all I can think of now but if I forgot something, don't be afraid to ask. Please someone help me!

RELEVANCY SCORE 200
Preferred Solution: BSOD and crash during encoding with Handbrake

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD and crash during encoding with Handbrake

If you would like for us to be able to effectively help you, we will need you to follow the Blue Screen of Death (BSOD) Posting Instructions Please be sure to do each step, as outlined in the tutorial. By doing this, we will have the necessary information to help you.

Read other 3 answers
RELEVANCY SCORE 57.2

I get the aforementioned BSOD, only in one specific situation, and it happens 100% of the time. Otherwise, I never get BSODs in this computer. The problem happens only when I open Handbrake, and drop an mp4 on it to use as a source. The moment I do that, boom BSOD. It's extremely strange. I have tried reinstalling Handbrake of course to no avail. For now my only solution is to have a Ubuntu VM with Handbrake and run it that way. Any idea what could cause this? Thanks.

Read other answers
RELEVANCY SCORE 56.8

I've recently started having a problem whenever I try to encode or convert video files. Any file that ends up being over about 30mb in size while being encoded will cause my computer to throw up the BSOD. When I get back onto my desktop I'm told that the problem is with the nforce SATA drivers and that I should download the newest drivers. Thing is, I've done that. I've done some searching around and found that this isn't an uncommon problem, but haven't found any sort of answer that helps me out. I would appreciate any suggestion from anyone. I leave it to you and your vast computer knowledge.


More details:
I am running Vista x32
2 GB DDR2
nforce 590sli mobo
AMD X2 6400+
geforce 8800GTS

A:Vista crash while encoding video

Hi -

Sounds like you have been using WERCON - which is good.

I'll take a look at the dumps and other system info to see if I can find anything that may help. Please follow THESE instructions and attach the zip files to your next post.

Regards. . .

jcgriff2

.

Read other 3 answers
RELEVANCY SCORE 56

This is a computer that I built a couple of months ago and it consistently crashes when running handbrake, not every time but say 3 out of 4 times. It will also crash when making large file transfers like moving my movies from one hard drive to another. I have ran Memtest86 without any problems. I have also ran Prime95. When running prime95 these are the options:

It ran the first two options with no problems, but crashes pretty quickly when running the blend test.

Here is a copy of the report from reliability manager for the crash:

Source
Windows

Summary
Shut down unexpectedly

Date
‎3/‎13/‎2012 7:27 PM

Status
Not reported

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033

Extra information about the problem
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800768D8F8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
I have updated and reupdated all the drivers a couple of times.

Also I ran handbrake in SAFEMODE and still had the crash. I was trying to eliminate some of the hardware and drivers from causing the crashes, but I am not sure what drivers or hardware are eliminated during SAFEMODE.

Please help....thanks.

System Specs:
OS - Windows 7 Enterprise(64 BIT) SP1
CPU - Intel Core2Quad Q9550 Motherboard - Asus P5N-VM WS (REFURBISHED)
Memory - 8GB - DDR2 G.SKILL Graphics Card - Integrated NVIDIA FX470 ... Read more

A:BSOD when running handbrake or during large file transfers

Your .dmp file shows a stop error of 0x124 which is a general hardware error .





Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress


Some generic advice.

If you are overclocking STOP. Return to the default settings at least for now.
If you are running a RAID update its driver.
You can read more on this error and what to try here... Stop 0x124 - what it means and what to try

Read other 1 answers
RELEVANCY SCORE 49.6

Hello, I have been getting BSODs quite frequently when I'm trying to encode video. Since this is a very cpu intensive process I assumed it was due to my overclock. I went back to stock on my processor, and I am still seeing these errors no matter what program I'm using to encode. Any help would be greatly appreciated.

A:BSOD When Encoding Video

HotSpot Shield is known to cause BSOD's on some Windows systems - please uninstall it immediately.

Please install the chipset drivers for your system/motherboard
Your HiDefinition Audio is disabled. Is this deliberate? If so, why?

Lot's of Live Kernel Events in the WER section of MSINFO32 - may be indicative of a hardware problem. Please do this:





Please do the following:
- open Event Viewer (run eventvwr.msc from the "Run" dialog))
- expand the Custom Views category (left click on the > next to the words "Custom Views")
- right click on Administrative Events
- select "Save all Events in Custom View as..."
- save the file as Admin.evtx
- zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")
- upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).



Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Windows systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropr... Read more

Read other 3 answers
RELEVANCY SCORE 49.6

I have been trying to create a DVD-Video using Nero software. This has caused blue screens multiple times tonight. The encoding will work for maybe a third of the video then the PC crashes. The BSOD's have different headings, one mentioned a hardware error and another said that a driver had overran a stack-based buffer.

I have had BSOD's in the past, generally while playing computer games and found that disabling my virtual memory stopped this problem, due to this the first BSOD errors are not recorded.

A:BSOD's Encoding DVD-Video

One very important info is missing here .... have you enabled the Driver verifier yourself? And is it crashing the same way even without driver verifier? Cannot have the answer from the data, as there are two crash dumps and both are DV enabled.

What is catching the attention that there are two consecutive crash dumps with totally two different nature. One indicates to a hardware failure, and the other indicates to either a failing device driver or a malware. Now let us have a look at your files.

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Next, scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Then update the logitech drivers.
Start Menu\Programs\Logitech
Start Menu\Programs\Logitech\G9x, G500 and G700 Gaming Mice
Start Menu\Programs\Logitech\Mouse and Keyboard
The drivers are all old.

Code:
LHidFilt Logitech SetPoint KMDF Kernel 02/09/2011 07:23:09
LMouFilt Logitech SetPoint KMDF Kernel 02/09/2011 07:23:15
And they are unloaded in both the crashes.

Code:
Unloaded modules:
... Read more

Read other 1 answers
RELEVANCY SCORE 49.6

I have an editing machine and have been plagued with crashes when encoding in Adobe CS5. I have taken out all extra cards, and now with core i7 and quadro 3800 I am still unable to complete a encoding process.
Here is my latest bccode:

Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional information about the problem:
BCCode: 50
BCP1: FFFFFA8054E907FC
BCP2: 0000000000000001
BCP3: FFFFF960000FAA4E
BCP4: 0000000000000005
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

I am almost suspecting a bad cpu.....

A:BSOD and crashes - during encoding

Hi and Welcome to SF videofx






Quote:
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA

Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS


memory corruption was blamed in the minidump. I would download third party called memtestx86, burn it to CD using iso recorder http://isorecorder.alexfeinman.com/W7.htm , and let it run for at least 7 passes.

Also, in looking through your loaded drivers, I see you have this old driver:

Code:
ASACPI ASACPI.sys Mon Mar 28 09:30:36 2005 (42476C4C)
It is dated from 2005, which is known for causing BSOD, please update it, follow the instruction in this article:
http://www.sevenforums.com/787431-post2.html


Code:
BugCheck 50, {fffffa8054e907fc, 1, fffff960000faa4e, 5}
Could not read faulting driver name
Probably caused by : memory_corruption

Followup: memory_corruption
---------
PROCESS_NAME: explorer.exe

Read other 9 answers
RELEVANCY SCORE 49.2

Hey guys, hoping you can help me out because this is driving me mad!

I'm trying to re-encode a .mkv file using MeGUI but i'm constantly getting a BSOD when going through the process. I kick off the encoding, it gets to random points (tried numoerous times and there's no logic) and then just BSODs on me with the following information after a reboot ... does anyone have any ideas?

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 2057
Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 86E8C020
BCP3: B2000040
BCP4: 00000800
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1

Any help would be much appreciated!

Cheers

Danny
 

A:BSOD Using MeGUI / tsMuxer - Encoding .mkv

dvdflick will encode mkv files to dvd.. dvdflick is free software
http://all-streaming-media.com/CD-a...converting-AVI-MPG-MOV-WMV-ASF-FLV-to-DVD.htm
 

Read other 1 answers
RELEVANCY SCORE 48.8

Hi,

I got a couple of BSODs both while encoding H.264 with adobe media encoder. I was also using Samsung Kies and browsing the web with Chrome. I have encoded plenty of H.264 without issue, but I'm thinking there much be a glitch with the file I'm currently trying to encode, as since I have stopped trying no BSOD. If someone could verify it is adobe media encoder causing the BSOD, I would be most grateful.

Thank you kindly for your time.

A:BSOD While encoding H264, error 0x00000001

You try HandBrake: Open Source Video Transcoder to encode to H.264.

When I was a noob in the forum, I faced the issue of system hang during video encoding. Wishmaster helped me there, and the first question was .... are you overclocking? If so, set the hardware back to default. It applies to you too

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Let us know the results.
_____________________________________________________________________________________

Code:
BugCheck 124, {0, fffffa8007748028, be200000, 5110a}

Probably caused by : GenuineIntel

Followup: MachineOwner
------------------------------------------------------------------------------
BugCheck 101, {31, 0, fffff880035d7180, 3}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

Read other 4 answers
RELEVANCY SCORE 48

Hey all, i'm new and need some help recently i've been BSODing alot randomly doing stuff
leaning towards old and bad memory but i need some advice to be certain.

thank ahead of time!





Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: fc
BCP1: FFFFF880043131B8
BCP2: 80000001A48DC963
BCP3: FFFFF8800D09B7E0
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\091012-19718-01.dmp
C:\Users\******\AppData\Local\Temp\WER-31980-0.sysdata.xml

A:BSOD Randomly Gaming,Streaming,Video Encoding

Hello and welcome aboard.

Can you post following the steps of http://www.sevenforums.com/crashes-d...tructions.html ?

Read other 4 answers
RELEVANCY SCORE 47.6

Hey guys!

This is my first post and I really need help for my desktop.

My goal is to do some Crysis live commentary and the computer keeps randomly crashing when playing the game (or any other game) and consistently crashing when encoding the video (crashed with 2 different programs).

System info:

Windows 7 Ultimate 64-bit SP1
Microsoft Security Essential
CPU: Phenom II X4 955
RAM: F3-12800CL9D-8GBXL
PSU: OCZ500SXS2
GPU: 2 x AX5770 1GBD5-H (Crossfire)

Symptoms:

- Randomly BSOD or Hangs when playing Crysis, Crysis Warhead, Starcraft 2
- Consistently BSOD or Hangs when encoding videos with PowerDirector 10 and Adobe Premiere 10

Tests or thing I've tried:

- Prime95: 1 error (not pro enough to understand the rest)
- AMD Overdrive: crashing sometimes on stability test
- Temperatures of CPU and GPU are ok.
- Tried using single GPU, nothing changed.

Thank you very much for your pro support guys!


Clsk

A:Seriously complicated problem (BSOD, HANGS, VIDEO ENCODING & RANDOM))

Update:

The PC just froze when I was browsing.

Read other 3 answers
RELEVANCY SCORE 44.8

Nowadays, my mind leads to YouTube Make-up Videos. This is because my sweet-heart likes it. Before long, there will be a birthday for her. So I have to prepare a kissable present Burn a sing-layer DVD with these make-up guide and tips videos. Yep, I am totally kissable. LOL
Well, hmmm, hmmm, forgive me for almost illiterate to these video editing stuffs. Ive used Handbrake (most people recommended), but I have to download the video to be converted. That really frustrated me since the network is soooooo slow. Mad. Is there anybody know of this kind of software which can convert and burn the videos into DVD directly without any other downloader?
 

A:Handbrake ….

Read other 6 answers
RELEVANCY SCORE 44.8

Hey guys, I have to rip a DVD for my class assignment and splice two clips together, so my professor told use to use Handbrake to do it. However, when I click "open source", my dvd file isn't there. I downloaded a file called libdvdcss-2.dll to see if that would work and I keep trying to open it on my computer but my computer keeps saying that I don't have a program to open it with. What do I do?
 

Read other answers
RELEVANCY SCORE 44.8

Apparently this is illegal, oops.
 

Read other answers
RELEVANCY SCORE 44.8

Changes between 0.9.3 and 0.9.4:






Quote:
Core:

New build system, allowing 64-bit binaries (around 10% faster)
Soft subtitles and Closed Captions:
DVD Closed Captions
ATSC Closed Captions
SRT subtitle import
Text soft subtitles in MP4 and MKV output
Bitmap soft subtitles in MKV output
Better support for DVD inputs:
Uses libdvdnav
DVD angles support
Workaround for libdvdread malloc bomb on invalid PGC entry
DVD drive region detection support in Linux
Handles DVD programs with more than 16 streams
No longer tries to detect and discard duplicate titles when scanning
Libdvdnav patched to perform read error recovery
Libdvdread patched to allow raw device access in Windows
Handles poorly mastered DVDs that had the menus ripped out of them
Better support for non-DVD inputs:
Preserves MP4 metadata
TrueHD
DTS-HD demuxing
8 bit audio
Better handling of transport streams where audio starts first
Better handling of transport streams that have been spliced together, leading to duplicate timestamps
Better VC-1 frame detection
Fixes bug that was causing one sec. of audio to be dropped on many ffmpeg files
Looks harder for aspect ratio info from DV sources
No longer truncates the last (dummy) chapter
Allows specifying field parity for detelecine and decomb
Better AV sync
Support for sources with no audio
DTS passthrough for MKV
x264 bumped from r1169 to r1347, which means speed optimizations, new default settings (see r2742 commit comment), the magic of macroblock tree r... Read more

A:Handbrake 0.9.4 available

Thank you. I use this every once in a while.

Read other 2 answers
RELEVANCY SCORE 44.8

Recently dumped my iMac for a Windows 8 POWERHOUSE from Dell. Unfortunately my Handbrake app will not copy commercial DVD movies, although this is easily done on a Mac running Handbrake. Any suggestions? Any FREE Handbrake styled alternatives for Windows out there?

A:Handbrake and Win 8

you need to bypass the copy protection before you can get handbrake to transcode it. how did they get around that on the Mac???

once you've ripped the movie to the hard drive sans copy protection, you can easily use handbrake on it.

Slysoft is well-known for a slew of great products. Check them out. Also DVDFab.

the free stuff is kind of antiquated. stuff like DVD Decrypter, DVD Shrink, etc.

Read other 2 answers
RELEVANCY SCORE 44.4

Hey all,
I'm having an issue with my ASUS F5GL laptop. If I try to launch a game like Counter-Strike: Source, Garry's Mod or Just Cause 2, not long after actually leaving the menu and beginning to play (anywhere between 2-5min), the whole laptop just silently crashes. I checked ALL the logs, and there is nothing in there, except something recorded at boot, saying the computer was not cleanly shutdown. When it does crash, a second before it crashes, a weird thin horizontal line appears in a random location on the screen, going all the way across the screen. This was happening under Windows Vista, but I just bought and did a clean install of Windows 7 Home Premium, and it's still happening. I have updated my drivers and it still happens. Laptop info is below (caution, large block of text)

Code:
System Information report written at: 04/21/11 15:41:47
System Name: BODENEAMONN-PC
[System Summary]

Item Value
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name BODENEAMONN-PC
System Manufacturer ASUSTeK Computer Inc.
System Model F5GL
System Type X86-based PC
Processor Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz, 2167 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 214, 16/03/2009
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C... Read more

A:Complete system crash (no BSOD or crash dump) when trying to launch most games.

Hello

You can try these to see what is going on with the overheating.

Core Temp

CPUID - System & hardware benchmark, monitoring, reporting

Read other 4 answers
RELEVANCY SCORE 44.4

Looking for counsel from anyone familiar w/ Handbrake---> Windows XP---> iPhone. Much obliged!

Read other answers
RELEVANCY SCORE 44.4

I'm using Windows 7 64 bit, and when I tried to rip a DVD, after about one hour, an error came up saying something about "This log's size is over 100mb, so there's a problem". So how do I fix this issue?
EDIT: I checked the encode log file, and it said "Block Code disabled" or something like that. Is it just copyright protection?

Read other answers
RELEVANCY SCORE 44.4

December 3, 2010

Handbrake 0.9.5 is available. Changelog below.



   Information

HandBrake 0.9.5 has now been released.

Release Highlights:

Core Library
* BluRay disc structure support. (No decryption support)
* Updated Libraries (x264, ffmpeg)
* SSA Subtitle support. (Including burn-in)
* MP3 audio now supported in MP4 files (Note: Limited Player compatibility)
* VOBSUB subtitle now supported in MP4 files (Note: Limited Player compatibility)
* Updated Presets for newer devices and better quality
* AC3 encoding support.
* Many Bug Fixes and other small improvements
* Improved DVD Main Feature detection (when using dvdnav)
* Universal audio downmix support (all audio types can be downmixed)
* Point*to*Point encoding (second or frame start and end times)
* Peak framerate option (Capped VFR)

All GUIs
* Updated x264 Advanced Panel
* Video Quality Slider drops % value and only shows RF for x264
* Batch Scan (Scan Multiple files at once. N.B: Does not include multiple VIDEO_TS folders / Image files)
* Many Bug fixes
* Many Tweaks to improve usability.
* Ability to edit queue jobs

Mac GUI
* New Audio Panel supporting >4 Audio Tracks
* VLC detection in /Applications and ~/Applications
* Multiple instance support

Windows GUI
* Encode Status in GUI. (CLI window is now always hidden)
* Improved Auto-Naming for Destination file name.
* Drag / Drop Video onto Main Window to scan.

Linux GUI
* Multiple instance support (run multiple copies of ghb ... Read more

A:Handbrake 0.9.5 Released

I was really hoping presets would be restored in this version. I skipped 0.9.4 because the Xbox360 preset was gone, and no string I found online worked for me as a replacement for the preset.

Read other 1 answers
RELEVANCY SCORE 44.4

Sorry if this is posted in the wrong forum.

If I own a DVD purchased out a shop and I want to place a copy on my Hard Drive, is it legal in the UK to do this? I tried Handbrake to rip a music dvd (owned [personally]) but it wouldnt play the file back. Tried WMP and VLC but neither could read the file. Is this an ordinary occurance and all i need to do is try again and hopefully the next time it will work?

A:Handbrake and DVDs

I can't answer about the legality, but I can tell you that you skipped a step. You need something to remove the protection first. The most common and easiest method is to use DVDfab HD Decrypter (which is free) to rip the movie to your HDD, and then Handbrake can take that folder and turn it into whatever type file you need.

Read other 7 answers
RELEVANCY SCORE 44.4

What are some alternatives for Handbrake? I've used Handbrake on my Mac for years, but heard the windows version doesn't work as well. I want to be able to backup copies of my DVD and also have digital versions for my netbook.

Thanks!

A:Handbrake Alternatives

have you tried handbrake yourself?

have a look at dvdshrink - it can rip and backup. it's pretty basic, but it's free.

as far as commercial software goes, dvdfab is very good and can convert to h264, but it costs unfortunately.

Read other 1 answers
RELEVANCY SCORE 44.4

Had my system for a while. recently upgraded all my drivers due to issues with bsods and crashing ive seen. ran maleware bytes, did scans from my iobit advanced system care.   took apart and blew out my computer. etc etc. done a few things all in the attemtp to try and get my computer back to normal running and have no sucess. i did run a memory diognostic and it says there was some memory issue's but i wasnt sure as to what to do next.
if anyone could help i would be theroughly apreciative.
as for what some of my problems are.
Random blue screen of deaths. with what look's to be rainbow-ish screen tearing right before (video card issue?)
some program fail to start. or while starting Crash/crash while useing them.
some programs that have NEVER had issue's suddenly  become unusable due to above reasons even after sucessfull reinstall's.
*edit:1*
another issue though uncommon is Explorer.exe fails to work and needs to restart it's self.
 

A:Random Bsod's, programs failing to start/crash/bug crash etc

You need to replace the ram.

Read other 1 answers
RELEVANCY SCORE 44.4

Hey,

My month and half old Acer V3 started to give BSOD's, did some sort of recovery and started working again for a couple of hours, if not trying to access any Windows files. If tried to look up error logs etc it gave different versions of the BSOF. So I tried to run Recovery, getting it back to factory settings, and that's when Windows crashed completely. I followed Acer customer support advice, ordered recovery discs (couldn't create one because Windows crashed when trying it. I got the recovery discs, ran the recovery which ended up giving me failure because of "missing image-something". Another call to Acer and they told to run different recovery version from the puter.

That recovery end to a failure again. After several restarts and what not, windows started up again, being slower than usual. I'm now having constant problems losing internet connection, I've had couple minidumbs and several issues with windows updater and such and these after machine should be back in the factory settings. Anyhow, here's the last log if anyone could take a look on it before I throw this machine to the wall.

A:BSOD and total windows crash and recovery crash/failure

For starters:





At work we start all repairs with a set of diagnostics. Often they find problems that weren't even expected. It's a waste of time to try to fix software on a system that has hardware problems.
Please try these free diagnostics for starters: Initial Hardware Diagnostics
Also, please ensure that you have ALL available Windows Updates (it may take several trips to get them all).



In particular, start with the hard drive diagnostics as I suspect that is the problem.

Although there's only 2 memory dumps (it usually takes 4 or 5 to conclude if it's a hardware error or not) - the repeated failure of factory installs makes a hardware failure the most likely problem here. Please run the diagnostics that I suggested above and let us know the results.

There are a list of drivers that need updating (because the recovery media was made a while ago). Don't worry about them until you've finished the hardware diagnostics. If all the diagnostics pass, then update the drivers.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

NTIDrvr.sys Mon Apr 19 21:39:04 2010 (4BCD05B8)
NTI CD-ROM Filter Driver by NewTech Infosystems (likely a part of Acer Empowering Technology)
http://www.carrona.org/dr... Read more

Read other 5 answers
RELEVANCY SCORE 44.4

Hello everyone I have been trying to fix my PC for the last two weeks. I've tried everything. Windows clean install a bunch of test on my hard drive. I've checked S.M.A.R.T done an 9 hour memtest and I;ve finally given up. I honestly don't know what to do this is a fairly new build done in June. I have the DM log files please anyone this is getting out of hand.
P.S I made this thread on my computer but when I am loading for a game or in the middle of a game computer gives me 0x000000F4 error no idea what it is :/ so far its only happened on league of legends.

Read other answers
RELEVANCY SCORE 44

Hi. I've recently been trying to play Metal Gear Solid 5 but every time I boot it up my PC either crashes as soon as the splash screens are done or after a few minutes. It's been crashing while playing other games as well but it's been much rarer. It's not a BSOD crash and it doesn't produce any crash dumps so I'm leaning towards it being a problem with either the PSU, the motherboard or one of the graphics cards. Any help with finding the cause of this would be appreciated.
 
The PSU model is fd-psu-newt2-800, the graphics cards are both Nvidia GTX760s and the motherboard is a ASUS Sabertooth Z77

Read other answers
RELEVANCY SCORE 43.6

I have a 1080p video (BBC's Planet Earth documentary),but it is in .m2ts format, and i wont to convert it into something more convenient, like .mov,or .mp4,or even .m4v with H.264I tried using various software ,but i get a huge (50 GB) file and i can't play it in either of my players I put constant quality, could it be because of that ?
 

A:Convert .m2ts with Handbrake

sorry, but we cannot assist with this, unfortunately.

from the rules page:

Circumventing Copy Protection - While we believe it's reasonable to make backup copies of CDs and DVDs that you own, a lot of people break copy protection for the wrong reasons. The law is still vague, at best, as to if it is legal to break copy protection in order to make such a backup, even for personal use. (The DMCA, for example, seems to make it illegal.) As a result, we do not allow discussion of how to break copy protection at this time. If we can find a nice way to draw the line, we may reconsider this in the future as laws get sorted out.Click to expand...

closing thread, thanks for understanding.

v
 

Read other 1 answers
RELEVANCY SCORE 43.6

I rip my DVDs for playback on my Xbox360. I accomplish this by using Handbrake 0.9.3, since it contains a nice, neat profile for my 360.

The two newer versions of Handbrake do not support profiles, and I'm unaware of any way to export the profile and add it in to a new version. I've found plenty of strings online to try in the newer versions, yet none of the outputted files will play back on my 360. Ones done in the older 0.9.3 with the 360 profile work just fine, on my computer and the console.

Is there anyway around this, or anyway to get the original profile settings into 0.9.5?

A:Handbrake Profile Question

  
Quote: Originally Posted by DeaconFrost


I rip my DVDs for playback on my Xbox360. I accomplish this by using Handbrake 0.9.3, since it contains a nice, neat profile for my 360.

The two newer versions of Handbrake do not support profiles, and I'm unaware of any way to export the profile and add it in to a new version. I've found plenty of strings online to try in the newer versions, yet none of the outputted files will play back on my 360. Ones done in the older 0.9.3 with the 360 profile work just fine, on my computer and the console.

Is there anyway around this, or anyway to get the original profile settings into 0.9.5?


The only thing i can think of is Taking note of what your 360 profile settings are in .9.3 and re-creating them in .9.5.

Also, the AppleTV/AppleTV 2 profiles should work on your 360.

Read other 1 answers
RELEVANCY SCORE 43.6

Hello,
Recently downloaded some full movie (mp4), and found a Hebrew subtitle. Located both files in a folder,
opened the subtitle with Notepad, made some minor editing, saved it (encoding UTF-8) srt file,
movie and subtitle same name.
Played the movie in any player on the system, the subtitle rans perfect, no need to adjust timing.
Then I loaded the movie in "HandBrake (0.10.5.0 - 32bit)", imported the subtitle, selected Hebrew and
utf-8, made a small preview file - subtitle was not added.
Note, I used the same procedure several times ago with other movies - results were good.
Do not know what happened, I would ask for some help please.
Thanks
Motim

Read other answers
RELEVANCY SCORE 43.6

I am looking for a handbrake alternative that can do all handbrake can but work. Willing to pay small amount. Anyone know of one which is good?

Hot 4 topics in forums and groups:
Mac OS X - the tenth major version of Apple's operating system for Macintosh computers, has been refreshing people?s experience in computer system ocean.
Apple iTunes - the world's best digital music player and the NO.1 music store. Download music, movies, TV shows, apps, and more to your Mac, PC, iPod, and iPhone.
HandBrake - a free Mac OS X/Windows utility for ripping videos from DVDs and saving them in various formats including MP4 files that are playable by the iPhone/iPod Touch.
Alternative to Handbrake ? special offer page, substitutes in place of Handbrake?s goods, seem to be the same and even better.

Movie fan and Apple fan I am and love the stuffs listed above so much. I often use Handbrake to convert Blu-ray movies or videos downloaded from iTunes to MP4 on Macbook. Things turned different then. Because I own a big collection of Blu-rays and want to put them on iTunes, this totally frustrated me. Which software or somewhat called alternative to Handbrake actually converts copy-protected Blu-ray movies directly to iTunes? I want to go both directions. The question bothers me day and night, so I have to do something. Doing Google search, asking friends for help, anything I tried gives different answers. No doubt there?s no better answer unless comparison. Finally g... Read more

A:Handbrake software alternative?

Handbreak does not support cracking copy-protection.
What you're looking for is a tool to do that, and I can't recommend anything of that sort.
 

Read other 1 answers
RELEVANCY SCORE 43.2

Hi there

Seems on W10 x-64 with latest updates the updated version of Handbrake sometimes crashes

Works fine on Linux with same settings !!!! encoding the same file !!.

Linux version

HandBrake rev5474 (x86_64)

Windows version

0.10.5.0 64 bit version

Windows build 1607 build 14393.351 (W10 Pro X-64).

Cheers
jimbo

Read other answers
RELEVANCY SCORE 43.2

Hey,

i'm getting a KERNEL_SECURITY_CHECK_FAILURE BSOD shortly after or by execution of the win10 version of handbrakeCLI (uses x264 encoder).
In compability mode (win7) it seems to work.

I updated the drivers before the last bluescreen (from the Lenovo homepage) but that didn't do the trick.

Laptop was upgraded from Win8 to Win10 some while ago. Dumps point to dxgmms2.sys or ntoskrnl.exe. Don't think it's an application fault, is it?

THOMAS-LAPTOP-19_02_2016_215418,60.zip

A:KERNEL_SECURITY_CHECK_FAILURE while attempting to use x264/Handbrake

Could you explain to me what this handbrakeCLI software is? I'm unfamiliair with it.






Dumps point to dxgmms2.sys or ntoskrnl.exe. Don't think it's an application fault, is it?




Most of the crashes show some stuff of the DirectX Kernel graphics (dxgmms2.sys) what points to the display drivers usually.
The ntoskrnl.exe is Windows Kernel, simplified it is never the true cause unless you experience a hell lot of problems (much more then only bluescreens).

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

Read other 0 answers
RELEVANCY SCORE 43.2

Hi. Until yesterday, I had Handbrake 10.2 installed. On launch, a message appeared (within the GUI) inviting me to click for 10.3. Which I did. I can't recall the exact sequence of events but it appeared to have gone smoothly and I was left with a popup saying Do you really want to uninstall 10.2? I said Yes as that seemed logical.

I then went to open up 10.3 ? nothing there. The only Handbrake related file I could find was a defunct link to the shortcut I had on my desktop. Ah well, so off I went and downloaded the 10.3 installer. But before I ran it, I used regedit to delete all registry entries referring to Handbrake. That way, my PC would be 'clean' right?

After the install, 10.3 launched and immediately showed a message about my previous presets and there it was ? 10.3 had the custom preset that I'd made with 10.2! Not only that, but 10.3 was able to load a DVD with DRM protection. To do that with 10.2, I had to copy a 'special' dll file into Program Files/Handbrake.

It seems I was mistaken then. Uninstalling a program and then deleting registry entries doesn't 'clean' your PC. Otherwise, my Handbrake 10.3 wouldn't have known about my old preset nor would it have the 'special' dll file.

So how DO you completely remove a program?

Read other answers
RELEVANCY SCORE 43.2

Hi. Until yesterday, I had Handbrake 10.2 installed. On launch, a message appeared (within the GUI) inviting me to click for 10.3. Which I did. I can't recall the exact sequence of events but it appeared to have gone smoothly and I was left with a popup saying Do you really want to uninstall 10.2? I said Yes as that seemed logical.

I then went to open up 10.3 ? nothing there. The only Handbrake related file I could find was a defunct link to the shortcut I had on my desktop. Ah well, so off I went and downloaded the 10.3 installer. But before I ran it, I used regedit to delete all registry entries referring to Handbrake. That way, my PC would be 'clean' right?

After the install, 10.3 launched and immediately showed a message about my previous presets and there it was ? 10.3 had the custom preset that I'd made with 10.2! Not only that, but 10.3 was able to load a DVD with DRM protection. To do that with 10.2, I had to copy a 'special' dll file into Program Files/Handbrake.

It seems I was mistaken then. Uninstalling a program and then deleting registry entries doesn't 'clean' your PC. Otherwise, my Handbrake 10.3 wouldn't have known about my old preset nor would it have the 'special' dll file.

So how DO you completely remove a program?

Read other answers
RELEVANCY SCORE 43.2

Hello. I'm ripping DVDs so that I can post snippets of scenes to put on Youtube videos within fair dealing laws. I'm trying to rip DVDs with Handbrake and it does create a file with playable videos, and there are no problems with the sound. However the picture quality comes out noticeably degraded. This might be a compression but I'm not sure.

I've tried adjusting the bar of the "Constant Quality -- RF" bar under the video section to increase image quality before downloading and adjusting over relevant variables but to no avail.

What do I need to do to resolve this issue?

With regards,
Roy
 

Read other answers
RELEVANCY SCORE 43.2

I am trying to down load the latest version of Handbrake (I dont have any old versions either). On dowloading the exe file when I click run it gives me an error saying ".NET runtime library v2.0 or newer is required. You have 1.1.4322"

What does it want me to do? I am trying to convert my dvds to MP4 format for my iPod video. Cant do anything due to this error.

HELP !!!
 

A:HandBrake Download Error Message : HELP

go to windows update and look in the non-critical updates, the .net v2.0 will be in there simply download and install via the website
 

Read other 1 answers
RELEVANCY SCORE 42.8

? OS - Windows 7 Home Premium
? x64
? What was original installed OS on system? Windows 7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? OEM Version
? Age of system (hardware) Roughly a year and a half
? Age of OS installation - have you re-installed the OS? Nope
? CPU - Intel Core2Duo P8600 @ 2.40GHz each
? Video Card - ATI Mobility Radeon HD 4570
? MotherBoard - Not sure where to find this out.
? Power Supply - Dell AC/DC adapter 19.5V output

Ok so, I was browsing the web when my laptop suddenly restarted - on restart was greeted by a small blue square saying something like..."there is a problem, check newly installed hardware or software etc." and a line saying starting memory dump...100, i figured it for a virus at first so i restarted.

Used CCleaner to check programs opening on startup and found a few .exe's which i didnt recognise - coming from AppData/Local/Temp etc. So ran a full malware check with MalwareBytes AntiMalware - returned one of the files and removed it and i deleted the rest. On restart computer seemed to be fine - continued to work for the rest of the evening. Turned on in the morning and the same blue screen greets me, I restart again, safe mode, and check for viruses - nothing.

So I let the blue screen continue, dumps the memory and restarts. Seems to be working fine then after 20mins of browsing - blue screen again and crash. Backing my computer up now an... Read more

A:BSOD - Crash on launch and Crash while running

Hi -

Remove Daemon Tools/ Alcohol 120.

If BSODs persist, run the Driver Verifier -- Driver Verifier - sysnative.com


Windbg Logs
--> http://sysnative.com/bsod2011/jcgrif..._jcgriff2_.txt
--> http://sysnative.com/bsod2011/jcgrif...riff2_.txt.zip

Regards. . .

jcgriff2


`


BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Jan 14 03:58:08.997 2011 (GMT-5)
System Uptime: 0 days 0:02:08.622
Probably caused by : ntkrnlmp.exe ( nt!ObpQueryNameString+4ed )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: conhost.exe
FAILURE_BUCKET_ID: X64_0xA_nt!ObpQueryNameString+4ed
Bugcheck code 0000000A
Arguments fffff8a0`0328703e 00000000`00000002 00000000`00000001 fffff800`02570901
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Jan 14 03:54:45.960 2011 (GMT-5)
System Uptime: 0 days 0:18:43.662
Probably caused by : win32k.sys ( win32k!MultiUserGreCleanupHmgOwnRemoveAllLocks+a1 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: eventcreate.ex
FAILURE_BUCKET_ID: X64_0xA_win32k!MultiUserGreCleanupHmgOwnRemoveAllLocks+a1
Bugcheck code 0000000A
Arguments 00000000`10000220 00000000`00000002 00000000`00000000 fffff800`02edb436
??????????????????????????????????????????????????????????????????????????????????????``
Bui... Read more

Read other 9 answers
RELEVANCY SCORE 42.8

Hi,

My windows is closing unexpectedly when ever I'm trying to convert videos using Handbrake and render my work files on Premier Pro. Before I didn't face this kind of problem it's happening after giving my Mother Board for servicing because of some power problem. I tried in all possible ways I know to fix this problem like reinstalling all codecs and programs, I also reinstalled my Windows but there is no change. I'm using Windows 7 Service Pack 1 with latest updates. Except this almost every thing is normal. How to fix this problem, is this happening because of problem in Mother Board?

A:Windows is closing unexpectedly while using Handbrake and rendering

Admin I apologise for not posting properly.

My Basic System Specs:
Processor: AMD Athlon II X3 440 301GHz
Mother Board: M2N68-AM Pluse
4GB DDR2 Ram
500GB HDD

I'm also attaching zip file of both Windows_NT6_BSOD_jcgriff2 & System Health Report

Read other 9 answers
RELEVANCY SCORE 42.8

Hi I've been using handbrake for approx 3 years running off my secondary HDD. The secondary HDD has died. So I uninstalled the Handbrake that was on that, then re-installed Handbrake to my Local C HDD.

It now will not open properly. I get this blank screen


then when I close handbrake I get the error code

An Unknown Error has occured.
Castle.MicroKernel.ComponentActivator.ComponentActivatorException: ComponentActivator: could not instantiate HandBrakeWPF.Services.EncodeServiceWrapper ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.BadImageFormatException: Could not load file or assembly 'System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The module was expected to contain an assembly manifest.
at HandBrake.ApplicationServices.Utilities.SystemInfo.get_GetGPUInfo()
at HandBrake.ApplicationServices.Utilities.GeneralUtilities.CreateCliLogHeader() in c:\HandBrake\Hudson\workspace\Release_WindowsGUI\0.10.2\win\CS\HandBrake.ApplicationServices\Utiliti es\GeneralUtilities.cs:line 121
at HandBrake.ApplicationServices.Services.Base.EncodeBase..ctor() in c:\HandBrake\Hudson\workspace\Release_WindowsGUI\0.10.2\win\CS\HandBrake.ApplicationServices\Service s\Base\EncodeBase.cs:line 59
at HandBrakeWPF.Services.EncodeServiceWrapper..ctor(IUserSettingService userSettingService) in c:\HandBrake\Hudson\workspace\Release_Wind... Read more

A:Handbrake video converter wont open

You would be better going on their own forums for this one as its their product

Read other 1 answers
RELEVANCY SCORE 42.4

Hi there

Converting 1080p MKV files encoded in H264 to H265

What's the best setting to use keeping original quality as much as possible -- a 2hr film currently with my H264 encode is around 4GB for MKV file.

The source is full HD 1080p captured from SKY Q minibox. Quality on playback is excellent but I want to store a lot of these on an external HDD so want to compress the size down a bit.

(note you need to use an HDMI splitter to get stuff off the SKY Q minibox otherwise the capture device won't see anything (DRM).

The capture device doesn't unfortunately capture in H265 which is why I need the conversion step.

I would like to get about 50% of that size with H265 - but not sure of the settings in Handbrake I should use.

Any video editors here --help please !!!!!

I'm not bothered if the final container is MKV or MP4 so long as it's encoded H265 and quality is very similar (preferably identical) to original file.

Cheers
jimbo

Read other answers
RELEVANCY SCORE 42

Hi,

For ease of use, i want to make a folder available at my company network for people to drop any video files in, and then to make it output to a standard format (mp4) in another folder. That way no one will have to wait for a video to finish encoding or have to think about conversion at all.

I can use a computer that is always on and running, connected to the network and with free space and processing power, but i wonder if this is the right way. What i have so far:

Using Syncback Pro, I'm automatically watching for file changes in the folder, then syncing the changed files to a local folder (so not to directly encode from the network. Then, after each sync i have Syncback run a bat file for converting, which is inside the local folder. This is the code:

FOR /F "tokens=*" %%G IN ('DIR /S /B *.*') DO "C:\Program Files\Handbrake\HandBrakeCLI" -i "%%G" -o "%%G".mp4 --preset="Normal"

The problem is that it outputs in the same folder as it inputs, which makes syncing back to the network sloppy. The next step in the process, which would be to sync the output files back to the network can be easily done, but not if the original and converted files are jumbled together. =

My question would be:

Am i doing this the right way? (in the broadest sense)
and
Is there a way to output handbrakeCLI converted files to a different folder?

Any help is appreciated.
 

Read other answers
RELEVANCY SCORE 39.6

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8010C69010
BCP2: FFFFF880069CD6AC
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\040913-9204-01.dmp
C:\Users\Phantom\AppData\Local\Temp\WER-21060-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

==========================================================

changed bios settings from RAID to IDE didnt seem to help this has occurred multiple times during playing planet side 2 the game runs fine then suddenly crashes im pretty sure i have the latest drivers and everything is up to date can someone clever help me please

A:BSOD Plannetside 2 (steam) black screen> reboot> BSOD crash report

A stop 0x116 is a display/graphics related issue. Many a factors or components may cause such a BSOD.

First of all, it is the display driver. From your BSOD dumps, I have noticed that it crashed the same irrespective of the driver version over time. So overlooking this part right now. Will concentrate it on later again, if needed.

Next thing is overclocking, which sometimes lead display to crash. And, you are slightly overclocked.

Code:
CPUID: "Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz"
MaxSpeed: 3400
CurrentSpeed: 3411
As the system is crashing, you should stop overclocking. Set all the hardware elements like CPU, GPU and RAM to default; and reset the BIOS to default too.
How To Clear CMOS (Reset BIOS)

Heat is another factor. Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Also, dust accumulation causes heat, and dust accumulation depends on the age of the system. How old the system is? If possible, dismantle it and clean the inside carefully .... specially the air vents and fan grills, so that it can blow the hot air out easily.
Dont forget to apply thermal paste to the CPU when re-seating the system.

Insufficient power supply is also a great cause of display crash. Check if the CPU is supplying adequate power there or not.
eXtreme Power Supply Calculator

It GPU itself may not perform upto the mark. Stress test the Graphics Card u... Read more

Read other 1 answers
RELEVANCY SCORE 39.6

Just did a malware scan and ended up with bsod. Please check my mini dump and advise on what to try.

Hjalmer

A:Recent crash issues system exception bsod and Page Fault bsod

Tried loading Malware Byte and had BSOD:

On Thu 4/3/2014 2:19:27 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\040314-17440-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF800030B7D79, 0x0, 0xFFFFFFFFFFFFFFFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System

Read other 3 answers
RELEVANCY SCORE 39.6

I was merely resizing a Windows Explorer window on the desktop when the monitor went black for 15-20 seconds, then the mobo splash screen came up, and Windows booted back up. The "Windows shut down unexpectedly" window came up and the details said it was a BSOD. The pertinent log files from the DM Log Collector app are attached.

*edit* I built this system over 3.5 years ago and I've never reloaded or reformatted anything in that time. Maybe it's about time to reformat C: since I have all my data files on a separate drive anyway.

Read other answers
RELEVANCY SCORE 38.4

Attachment 272276Hi,

I have been having alot of issues with BSOD and i went to reformat my PC thinking it will solve everything. But it didnt, now its have BSOD MEMORY_MANAGEMENT and alot of random auto shutdowns. I cant update my windows when the windows update is trying to update anything relate to NET.framwork. i've attached the minidump files. please help me.

A:BSOD Memory_Management and random crash without BSOD

Please follow - Blue Screen of Death (BSOD) Posting Instructions

Read other 9 answers
RELEVANCY SCORE 38.4

Hello!

I have been expiriencing problems with my computer which are as follows:
I do my thing on the computer (surf, play etc.) and suddently my screen goes black. It has been doing this for about a week now, and I received my new SSDs recently so I popped them in, put them in RAID-0 and reinstalled windows, hoping that a complete reinstall would fix it. But it didnt. I updated my graphics card driver and analyzed the minidumps this BSOD created.
Analysis:

Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Akke\Desktop\081611-9001-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*G:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02e4d000 PsLoadedModuleList = 0xfffff800`0308ae50
Debug session time: Tue Aug 16 20:56:35.629 2011 (UTC + 3:00)
System Uptime: 0 days 0:19:12.628
Loading Kernel Symbols
...............................................................
................................................................
...................
Loading User Symbols
Loading unloaded module list
...
*******************************************************************************
* ... Read more

A:Windows crash (BSOD without BSOD) nVidia

Have you tried a different video card? The bug check you received is usually a sign of a bad video card. It could also be overheating, power supply, or motherboard related.

STOP 0x116: VIDEO_TDR_ERROR troubleshooting

Read other 2 answers