Over 1 million tech questions and answers.

Windows 7 Service Pack 1 failed install

Q: Windows 7 Service Pack 1 failed install

Hey guys,
First of all, thank everyone for posting to this forum. I have found a lot of really helpful advice so far. Right now, however, I have not been able to diagnose and fix the problem I am currently having so I was hoping that someone could help me out. Basically my problem is that I have been able to install every update to Windows 7 up to Service Pack 1 which fails every time. I am pretty sure that I have tried everything I have read on here short of a clean reinstall, so I wanted to post first before I went to that. My error code screenshot and CBS files are attached. Thanks in advance for any help!

Attachment 351257

RELEVANCY SCORE 200
Preferred Solution: Windows 7 Service Pack 1 failed install

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Windows 7 Service Pack 1 failed install

SFC is reporting these errors...

Code:
Line 23334: 2015-03-02 07:48:15, Info CSI 00000343 [SR] Repairing 3 components
Line 23335: 2015-03-02 07:48:15, Info CSI 00000344 [SR] Beginning Verify and Repair transaction
Line 23338: 2015-03-02 07:48:15, Info CSI 00000346 [SR] Cannot repair member file [l:18{9}]"gulim.ttc" of Microsoft-Windows-Font-TrueType-Gulim, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 23341: 2015-03-02 07:48:15, Info CSI 00000348 [SR] Cannot repair member file [l:24{12}]"MSVidCtl.dll" of Microsoft-Windows-Video-TVVideoControl, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 23344: 2015-03-02 07:48:15, Info CSI 0000034a [SR] Cannot repair member file [l:24{12}]"nvd3dumx.dll" of nv_lh.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
CheckSUR is clear, so I'll post a fix for these later.

Read other 9 answers
RELEVANCY SCORE 92.4

I cant install windows 7 service pack 1.
Unknown error help me

A:Windows 7 Service Pack 1 failed to install

After doing a quick google search, it appears to be a pretty generic error code.

Do you have any third party antivirus or firewall installed? If so try disabling those untill you get it to install. Remember to disable those services in the "services.msc" directory as they will re-enable at the next boot and could cause havoc with the install procedure.

Read other 9 answers
RELEVANCY SCORE 92.4

I have tried everything to try to download Service Pack 1.

I've ran a SFC Scan and it has not worked, it had said it could not have repaired the corrupted files of the computer, I have also renamed the SoftwareDistribution folder in the C: Drive. I have reseted the Windows update cache and still not working. I get an error code 8024200D every time I try to install it. I've tried to manually install it and still says the remote procedure call failed. I have also tried the System readiness and still has not fixed anything.

Thank you in advance.

Read other answers
RELEVANCY SCORE 84.4

Microsoft .NET Framework 3.0 Service Pack 1 (KB929300) (x86 Failed to install. What is this service pack anyway?

A:Service Pack failed to install

It's a Service Pack to the .NET 3.0 Framework. It won't install if you don't have Framework 3.0 installed. You can check it in Add/Remove Programs in Control Panel. Some programs may need this version installed to run correctly.

Read other 2 answers
RELEVANCY SCORE 82.8

I was installing the Windows Vista Service Pack 1 so that I can install office 2010. The installation seemed to fail and stall on a black screen with some text about the registry. I turned the computer off and took the battery out to make sure it was off. I waited 5 minutes and tried to boot up at that blue screen with the choice of "safe mode" and "recovery mode" etc. I tried all the options available and all have failed. I tried the Vista recovery disc and it failed to. I don't have a Vista installation disc and don't want to buy one. I do have a Windows XP installation disc. The question is: Can I install XP on my laptop over the Vista that is already installed? Please help me.

A:BSOD on Vista after Service Pack 1 failed to install

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.

I suggest starting all troubleshooting with the following diagnostic tests (located at this link: Hardware Diagnostics ). They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
Hard Drive Diagnostics (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




You can attempt to install XP on the system - but you have to have a valid product key for XP that will work with the XP installation disk. You will have problems with getting drivers, so you'll need another computer to communicate with us while trying to get all the drivers (there is guarantee that you'll be able to get all the drivers that you'll need).

Start with the diagnostics above, that'll tell you if the system is sound enough to install Windows

Read other 1 answers
RELEVANCY SCORE 82.8

I have checked the Microsoft help page, multiple other people seem to have the same or a similar problem. Some of them have had success in solving it, but their solutions do not work for me. The service pack downloads fine, but fails when installing, giving me the error code 8024200D (which I have looked up, and the answers there did not help.) I have run the system update readiness tool, which did not find anything out of the ordinary, and I have also done the SFC scan, which also did not find anything out of the ordinary.

I have some suspicions that it might be because I have Windows N Ultimate edition, but I am not sure. The screenshot is from viewing the details of the failed update on the "view update history" screen in Windows Update. It doesn't really say anything that I have not already said. I am completely puzzled here.

I guess I COULD make a backup and install regular Windows 7 to fix the issue (even if it isn't compatibility, a clean install might fix it), but I would like to avoid that if possible. Thank you in advance, and if you need any more information to help me, don't be afraid to ask.

A:Service Pack 1 Install Failed Error 8024200D

I don't know what kind of rules there are with bumping, but I really just don't want my thread to get buried in other threads. Please help.

Read other 9 answers
RELEVANCY SCORE 82.8

When I ran KB948465 it failed and produced error 800F082f.
How can I now proceed? I have checked Microsoft Updates and it says that there are no updates needed.I obviously need to run it again but it is not there.

A:[SOLVED] Vista Service pack 2 failed to install

I get the same error code when trying to install Vista SP2. I've downloded and installed it numerous times and it keeps giving me this error code and saying I need to restart. I do this and the whole process begins again.

Read other 3 answers
RELEVANCY SCORE 82.8

So I've got a Dell back my apartment that keeps looping because Service Pack Failed to install, it shuts down and reboots, and then it loops.

Even in Safe Mode, tried startup recovery to try a system restore, but that crashes and then the laptop shuts down afterwards.

Is there a fix? If, so what can I do fix this issue?

It's running Vista x86

A:Service Pack Failed to Install. Reverting Changes. (Vista x86)

  
Quote: Originally Posted by 0080900


So I've got a Dell back my apartment that keeps looping because Service Pack Failed to install, it shuts down and reboots, and then it loops.

Even in Safe Mode, tried startup recovery to try a system restore, but that crashes and then the laptop shuts down afterwards.

Is there a fix? If, so what can I do fix this issue?

It's running Vista x86


Have you run the system readiness tool?
Ensure you install the correct 64 or 32bit option for your system)

Download the System Update Readiness Tool (64bit)
Download the System Update Readiness Tool (32bit)

ISC Diary | Windows 7 / 2008 R2 Service Pack 1 Problems

links courtesy jmh

Read other 2 answers
RELEVANCY SCORE 81.6

I keep trying to install the update Microsoft .NET Framework 1.1 Service Pack 1. It continues to tell me that it has failed to install. Can anyone help me? Thanks in advance!
 

A:Solved: Microsoft .NET Framework 1.1 Service Pack 1 failed to install

Read other 6 answers
RELEVANCY SCORE 80

Please help, I'm not highly technical and I think my problems started a while ago when Vista Service Pack 2 failed to install which caused startup failure and I couldn't log in. I attempted a fix using startup repair and was able to login again but now all my Vista updates since then fail to install and today my computer is running extremely slow, constantly lagging. I think it's related. I also get 'windows installer service could not be accessed' issues so can not run Hijackthis. Does anyone have any suggestions? Thanks in advance
 

A:Service Pack 2 failed to install, now updates fail and computer running slow

hello and welcome

see if this ms fixit will help. http://support.microsoft.com/kb/971058/en-us

If not try to restore to a date before the sp2 problem

good luck, post back and we can go from there!!
 

Read other 2 answers
RELEVANCY SCORE 76.8

I cannot install the Windows Service Pack 1 on my Windows 7 notebook. I have attached a picture of what it shows after failing to install the service pack after restarting the computer.

Upon clicking the "Go online..." link, I have followed the steps exactly as shown here: http://windows.microsoft.com/en-us/windows7/troubleshoot-problems-installing-service-pack

The service pack still fails to install.

A:Failed Installations of Windows 7 Service Pack 1

Take a look at http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/windows-7-sp1-gives/4c0d71a6-c2d9-4a68-9e68-aa7cd7b6f848 .

Louis

Read other 4 answers
RELEVANCY SCORE 76.8

The service pack fails to update my syste, is windows xp home edition version 2002 with service pack 1 it's an HP Pavilion Intel R celeronR CPU 2 with 2.70 GHz 248 MB of RAM

and the upate for the service pack 2 downloads but fails to install on my computer who has experience with this problem
 

A:Windows service pack 2 for xp failed to update

Read other 6 answers
RELEVANCY SCORE 76.8

I dot know what is wrong, I have tried updating my windows 7 with service pack 1 update several times but it reported update failure with error message:
Error code 80072F78 Windows update encountered an unknown error.

All other updates are applying successfully.
what should be done please.

thank you.
Augustine Ojeka

Read other answers
RELEVANCY SCORE 76

A few days ago, I was updating through windows update then when it's the time to restart. The "Configuring service pack" stuck to 44% and after a few minutes, it shut down. Then repeated again ad got stuck again in 44% and it just repeats the process. I was annoyed so I pushed the power button and rebooted the laptop then after the welcome screen (or b4 dunno) It just says "Failes to configure sp or sumthing then reverted to original" then when I saw the update history I saw that SP 1 failed to install. I tried to manually install it but failed to continue because some components are missing. I dunno wat to do anymore. I'm a computer noob. Please help TT_TT

A:Windows service pack 1 (KB976932) update failed.

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

Read other 7 answers
RELEVANCY SCORE 76

Last fall I initiated a download of a service update for my computer and walked away to go about my day. When I returned to the computer it was stuck in a loop something like this:

Computer: Running AutoChk
Me: Fine, whatever you want to do.
Computer: AutoChk Not Found
Me: ???
Computer: FATAL ERROR <blue screen with ominous and confusing error location description>
Me: Crap.

My wife had a baby shortly thereafter and I have not gotten around to servicing the inoperable computer until now. I'm trying to repair windows off of the install disk that came with the computer. Here's what I'm dealing with:

Computer: Welcome to Setup... To repair a Windows XP installation using Recovery Console, press R.

Me: Ok, "R"

Computer: 1: C:\WINDOWS... Which Windows installation would you like to log onto <To cancel, press ENTER>?

Me: Well, it seems that I want to log onto option 1. "1"

Computer: Type the Administrator password:

Me: I guess you are talking about my log on since I've had you since you were a little baby. "*********"

Computer: The password is not valid. Please retype the password.

Me: I have no idea what you're talking about. Let's make sure this isn't a case sensitive issue. "*********"

Computer: The password is not valid. Please retype the password.

Me: Oh come on, now. Don't be like that. "**********"

Computer: An invalid password has been entered 3 times. To r... Read more

A:Need help with Windows XP repair after failed service pack installation

slipstream the sp into the windows disk with nlite

http://www.nliteos.com/download.html

then use the slipstreamed disk to run a repair install

to do a repair install
set the bios to boot from cd first
pop in the disk
reboot
choose install
ignore the first repair option and continue with install
when windows finds the previous installation
then do the repair

Read other 4 answers
RELEVANCY SCORE 76

Hello, first time posting please bare with me.

I am trying to update a family members laptop which is a Dell Inspiron 1720 with vista home premium pre-installed. Windows update recommends Windows Vista SP1 (KB936330). Made several attempts to download and install this update and haven't had any success. The update runs like normal and automatically restarts the computer, then I get a window with some info saying the update failed to install. Error code 8007371C, and error code 8007000D. Two different codes for two different attempts.

I troubleshooted this through microsoft help and solutions and followed their instructions. I downloaded the stand alone 32-bit package from the microsoft download center and ran it, my computer froze up during the install (the install was supposed to take around an hour to complete) so after a few hours frozen I chose to cancel the install and try again. I still haven't attempted a re-install. Thought I would see if anyone else knows how to fix this issue first.

Thanks

A:windows update vista service pack 1 "failed"

Hi!

Do have any firewalls/antivirus/antispyware programs installed? If so, try disabling them and running the manual patch.

Read other 4 answers
RELEVANCY SCORE 75.2

i downloaded a valid copy of Windows 7 from DreamSpark And Now Activation failing - Please help me out of the problem.
Thank You
--------------------------------------------------------------
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-KPF2W-JPDGC-THMBH
Windows Product Key Hash: h2wi5odtv4sQd3o3f6kaHunR0FI=
Windows Product ID: 00371-704-6607432-06365
Windows Product ID Type: 5
Windows License Type: Retail
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {DEE3BBC1-87BF-4A60-A186-6E2AA8568ECD}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 109 N/A... Read more

Read other answers
RELEVANCY SCORE 75.2

I have a HP mini 110-3000 and am trying to install the Windows 7 Service Pack 1 but every time I have tried to update, it comes up with error code 26. I have tried everything that I could think of and need assistance.

A:Windows 7 Service Pack failed to update, error code 26

Hello Krayola47, welcome to SevenForums!

Can you post the requested data please?

Windows Update Posting Instructions

Tom

Read other 1 answers
RELEVANCY SCORE 71.6

Hi,

I am trying to install service pack 2 for my windows 2000 home edition computer.

I have tried using the website for windows updates but it will not allow me to download, and nothing really seems to be right for my computer.

I have also tried using the link i have seen on a few ofthe posts on this site but again i have the same error. It brings up message 'page cannot be found'.

Can anyone help?

Thank you

A:How Do I Install Windows Service Pack 2?

Hello afy4ev4,Microsoft's technet has a good guide on how to do it found at http://technet.microsoft.com/en-us/library/bb742588.aspxWhat links on this site produce the error?

Read other 1 answers
RELEVANCY SCORE 71.6

Service pack 1 refuses to install on my pc giving me the error "Code 80073701".
I think this may be due to the language packs after reading up on solutions.
I think this because when i ran "lpksetup.exe" the only language pack installed "English(English)" has a yellow warning triangle next to it.
I wondered whether anyone knows hows to reinstall it or remove the errors

A:Service Pack 1 will not install on windows 7.

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

Read other 2 answers
RELEVANCY SCORE 71.6

can' t install the windows 7 service pack

Read other answers
RELEVANCY SCORE 71.6

I follow each and everyone of these steps

Steps to take before you install Windows XP Service Pack 3

But after I install the computer restarts and never goes past the Windows Splash Screen. The bar keeps moving but it stays there forever (I let it run for about 1 hour, twice).

So I have to start in Safe Mode and do a system restore.

Can anyone help?

A:Windows Xp SP3 (service pack 3) will not install!!

Have you run Windows UPdate manually doing the Software Updates and Critival Updates from the Windows Update site? I believe there are some updates that must be in before installing Sp3 but personally if your system is older, I never suggest my clients install Sp3 at all as I see nothing to gain and a lot to lose potentially.

Read other 3 answers
RELEVANCY SCORE 71.6

Hi, I'm Glad I Joined this Forum,
I am Still Finding Out how to Show my IDE Hard Disk (Samsung SP0842N)
But when I start the Setup, It Redirect to the Load Driver.

What Should I Do to Install Windows 7 from my IDE DVD-ROM to IDE HDD?


Thanks for the Hands,
Nico

A:I Need help to Install Windows 7 with Service Pack 1 on my PC

Hi Nico, and welcome:

Where did you get Win7? DId you burn the DVD yourself? If so confirm the ISO integrity or download another, then burn to DVD using ImgBurn at 4x speed.

Reset the BIOS to optimal defaults.

Unplug all peripherals and other HD's besides target.

Wipe the HD: Clean and Clean All with Diskpart Command

Win7 rarely needs IDE controller drivers, but you can try inserting your chipset at the Load Drivers link on drive selection screen during install. Normally this is an installer error.

Read other 6 answers
RELEVANCY SCORE 71.6

I am trying to install the windows 7 service pack 1 but it will not let me. I have already tried the standalone installer and downloading the service pack directly and running it, but it will not work. When I try to run it through windows update it sits at 0% and I get the error code 80004005. How can I fix this?

A:Windows 7 service pack 1 will not install

That error code roughly translates as 'access denied'

Since Windows Updates and the Software protection service have many things in common, it can be useful to see a copy of the MGADiag report.....

We need to see a full copy of the report produced by the MGADiag tool
(download and save to desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once saved, run the tool.
Click on the Continue button, which will produce the report.
To copy the report to your response, click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your response.

Read other 9 answers
RELEVANCY SCORE 71.6

I just used the emachines restore DVD (version 1.0) to reinstall Windows XP.

Per microsoft website, service pack 1a or 2 need to be installed prior to installing service pack 3.

Attempt to install in "safe mode" results in same error message.

(Per microsoft website, "automatic updates" are not available for Windows XP.)

I am having the same issue with both 1a and 2. I have downloaded them from CNET and from the MS site with the same issue/messages;

"The following error occurred while Service Pack 1(2) Setup attempted to download the Service Pack 1 files from the Internet: The server did not respond."

The point of installation denoted in the "details" window shows this; "http//xpSP1.microsoft.com/isapi/pstream3.dll/xp/sp1.USA.1106a"

Thank-you for your help.
 

Read other answers
RELEVANCY SCORE 71.6

I used to get error code 0x80071a90. So I followed these directions: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/windows-7-sp1-gives/4c0d71a6-c2d9-4a68-9e68-aa7cd7b6f848

After I completed them, I tried to install Windows 7 Service Pack 1 again, but now I get error code 0x800f0826.

A:Cannot Install Windows 7 Service Pack 1

Type services.msc in the start search box. Click on the icon... when the Window opens, scroll down to Windows Module Installer. Right click on it, set it to automatic and start the service.Let us know if that works.

Read other 2 answers
RELEVANCY SCORE 71.6

Hi, I was hoping you could help.

I am unable to install windows xp service pack 2. I have downloaded it and it gets to final stages of instalation (performing cleaning) and then I get an error message saying that it could not complete installation.

I have a proper copy of win xp and have used it for ages and registered it. The problems came when I got a new motherboard and it asked me to register windows which I did successfully. When I went to download SP2 it told me I had to register windows and to follow certain steps in the control panel.

I could not do this as the final step was to go to the activate windows option in control panel which was not there ( I suspect because I have already activated).

So i had to get the download from another source.

Any help would be much appreciated, as I have had no problems with windows registering or validation before with this disk and I have also downloaded sp2 before.

Cheers,

Bruce
 

A:cant install windows xp service pack 2

sorry the problem has somehow fixed itself. the automatic update seems to have installed sp2 and circumvented the problem I had. Cheers anyway.
 

Read other 1 answers
RELEVANCY SCORE 71.6

ya so umm, when do the rest of us get the good stuff?

A:When can we install Windows 7's first service pack?

I'm waiting for an official release and then see it pop up as a Windows Update to be installed.

Let them finish debugging and crashing. If it works like the new MSE update last week I'll definitely wait.

Mike

Read other 9 answers
RELEVANCY SCORE 71.6

Back Story: My Toshiba Satellite laptop recently had a little problem with overheating, so for now, I've been using an old Dell Inspiron 1100 with Windows SP1.
I've been using this laptop, and I have to deal with it for quite some time before I can replace my other one. Anyway, I've attempted to install Windows Service Pack 2 and 3 several times (I can't download or update Windows applications without it), but I haven't had any luck.

I almost get to the end of the installation when the "Extracting Files" box closes and an error message pops up saying "Setup Error: System cannot find file specified", then "Setup Error: Installation did not complete". It does this after the extraction stops on "i386\update\update.exe"

I tried Google for some solutions, and it led me to look in the SetupAPI Log, this is what I found:

[SetupAPI Log]
OS Version = 5.1.2600 Service Pack 1
Platform ID = 2 (NT)
Service Pack = 1.0
Suite = 0x0300
Product Type = 1
Architecture = x86
[2008/03/13 13:40:59 352.1]
#-198 Command line processed: c:\33b432170b17f5f468631a04\UPDATE\update.exe /quiet /norestart /overwriteoem
#E361 An unsigned or incorrectly signed file "c:\33b432170b17f5f468631a04\update\update_wxp.inf" will be installed (Policy=Ignore). Error 0x800b0003: The form specified for the subject is not one supported or known by the specified trust provider.
[2008/07/29 16:31:29 3632.1]
#-198 Command line processed: c:\dc9e... Read more

A:Cannot install Windows Service Pack 2 or 3

I've solved a similar problem, I couldn't install downloaded updates from the net and or the Windows Update site - after trawling through several sites including the updates site I came across a link recommending downloading and resetting some administrator keys http://www.microsoft.com/downloads/...E56-D8FE-4A91-93CF-ED6985E3927B&displaying=en
it directs you to download the SubInACL tool SubInACL.exe
I followed the directions and all the download back logs have cleared up
 

Read other 2 answers
RELEVANCY SCORE 71.6

If you find that you have issues where Windows service Pack 1 fails to install from the ms website, there&#8217;s no need to re-image the laptop, all you need to do is run the hotfix below and reboot then try reinstalling Win SP 1 from the ms website.

Instructions:-

Download the System Update Readiness tool from http://www.microsoft.com/en-us/download/details.aspx?id=3132 save it to the desktop and run it.

Please note that the win 7 SP1 can take about 1 hr to install if not longer.

hope this helps
 

A:Windows 7 Service Pack 1 won't install

Read other 6 answers
RELEVANCY SCORE 71.6

I follow each and everyone of these steps

http://support.microsoft.com/kb/950717

But after I install the computer restarts and never goes past the Windows Splash Screen. The bar keeps moving but it stays there forever (I let it run for about 1 hour, twice).

So I have to start in Safe Mode and do a system restore.

Can anyone help?
 

A:Windows Xp SP3 (service pack 3) will not install!!

http://windows.microsoft.com/en-US/windows/downloads/service-packs

defrag the "c' drive try again..
 

Read other 3 answers
RELEVANCY SCORE 71.6

I have read and followed for the past year all advice given about this error. Basically the system store is corrupt and I have no idea where to go to get the files to fix it. I have attached screen prints of error code and also the log files as requested in posting updates.

Have run System Readiness tool , turned off anti virus, done SFC... all to no avail....

Could anyone help before I downgrade to XP

A:Windows 7 Service Pack 1-Just will not install..tried everything..help

  
Quote: Originally Posted by redtopper20169


I have read and followed for the past year all advice given about this error. Basically the system store is corrupt and I have no idea where to go to get the files to fix it. I have attached screen prints of error code and also the log files as requested in posting updates.

Have run System Readiness tool , turned off anti virus, done SFC... all to no avail....

Could anyone help before I downgrade to XP


Try this Repair Install

Read other 2 answers
RELEVANCY SCORE 71.6

I have Win 7 Ultimate 32-bit. I have never had SP1 before. I recently rolled back my PC a few day with system restore, then updated Windows to the newest updates. I downloaded SP1 32-bit and when I try to install it, it installs right to almost the end and gives me:Error 0x80070002

I've looked around on the internet but have yet to found a fix. This error seems to affect a lot of different things.

A:Can't install Windows 7 Service Pack 1

i found this. they talk about 64 bit, but it should apply to 32 bit as well.

Win7 64 - SP1 Failure to install with error 0x80070002

Read other 7 answers
RELEVANCY SCORE 71.6

Hi,Everytime I try to download Windows XP Service Pack 2, I get this error message:"Access Is Denied"What do I do to fix this error?

A:Can't Install Windows Xp Service Pack 2

Jesse,

The easiest way is,boot to safe mode. Then log in as the administrator. Run service pack 2 setup from here. There are many variables that may be causing conflicts. As long as you have a valid copy of XP this is the easiest way to to bypass the possible conflicts causing the error message.

Be (Safe Mode) Safe

Da Bleepin AniMod, Animal

Read other 3 answers
RELEVANCY SCORE 71.6

I need to Install Service Pack 1(sP1) on Windows 7

Read other answers
RELEVANCY SCORE 71.6

Windows XP Media Center Edition version 2002 service pack 1
Dell Dimension 4600

I'm unable to install service pack 2 from the automatic update or microsoft download center. First, I get a box that says:
Service Pack 2 Setup...
(red X) Access is denied

then, a box that says:
Service Pack 2 Setup Error
(red X) Service Pack 2 installation did not complete
Select 'ok' to undo the changes that have been made
(ok)

then, the Windows XP Service Pack 2 removal wizard runs.

One piece of info that might be useful is that when I boot up my computer I get a message that says:
The file dtscsi.sys is corrupted
press any key to continue

Any help to fix this problem would be greatly appreciated.

A:Can't install Windows Service Pack 2

Google the filename.

It seems that the .sys file is part of Daemon Tools.
The advice seems to be to remove Daemon Tools.
Don't take my word, read about it yourself first.

You could get a copy of the Service Pack 2 CD from Microsoft
to avoid the download.

I still have my CD, I also have Dimension 4600 (6 years old)
which runs sweetly on Service Pack 3.

Read other 6 answers
RELEVANCY SCORE 71.6

Hey Guys,

Im trying to download Microsoft Service Pack 2 to my computer and when i get to the part of installing, it comes back saying "Installation Unsecessful" and also just before i downlaod, it says that there is 0kb to downlaod and 0mins???

Please help!!

jenna
 

A:Cant Install Windows XP Service Pack 2!!

Why the duplicate post?

http://forums.techguy.org/windows-nt-2000-xp/487344-s-o-s.html
 

Read other 2 answers
RELEVANCY SCORE 70.8

I'm a guy who likes to keep all the software on my laptop updated to the latest version (Except Windows updates). Recently I saw on the web that there is a service pack update for Windows 7 named Service Pack 1 and searched more for details about this update and found that many users who have updated to Service Pack 1 are experiencing slowdowns. I have already downloaded the genuine SP1 ISO file for the Ultimate version and hesitating to go for a fresh install because of these bad reviews.
Will a clean install of Windows 7 Ultimate Service Pack 1 (x86) make my computer slower than my current non-SP Ultimate (x86) edition as many users have posted on the internet? If so how can I overcome that problem?
Please help me

A:Should I install Windows 7 Service Pack 1 Update?

I'm one who applies pretty much all OS updates on all my machines (other than hardware drivers from MS update) and have never experienced a slow down due to updates being applied. IMO, even if you don't apply any other updates you should apply SP1.

Read other 9 answers
RELEVANCY SCORE 70.8

Hi all,
In my sector we doing patches update monthly. For the patch update we need to install services pack1 first.
But while in install service pack the attached error has been occur.
I try manually and also auto update, but i can't.
Kindly provide your advice.

Read other answers
RELEVANCY SCORE 70.8

I recently bought an ipod video and on the mox it says i must have windows 2000 with serivce pack for but i know my computer only is on sp1. What are the correct steps to get to serivce pack 4? A couple months ago i attempted to get sp4 and it crashed my computer and i had to get the windows reset(dont remember the name) which completely reset my computer to the original default settings and everything, all files and everything was lost. Before i did that i talked to a computer pro and that was his advice since he said the service pack failed. The only reason I am mentioning this is because of the Ipod that I bought, i will ahve to upgrade my computer to service pack 4. When i move to service pack 4 will i have to start at 2 then move to 3 then tto 4 or can i go straight from sp1 which is what i have to sp4? anything will help thanks.
 

A:How to install Service Pack 4 for Windows 2000

Read other 6 answers
RELEVANCY SCORE 70.8

Hi I'm trying to install sp1 on win7 but it always fail..
I can't understand almost nothing from the log, can somebody help me?
here the installation log:
http://www.devfarm.it/CBS.zip

A:Windows 7 Service Pack 1 fails to install

Do an Inplace upgrade to repair Windows:

How to Do a Repair Install to Fix Windows 7
http://www.sevenforums.com/tutorials/3413-repair-install.html"A programmer is just a tool which converts caffeine into code"

Read other 6 answers
RELEVANCY SCORE 70.8

when i log into my computer i get an update alert, asking me to update with windows vista service pack 1, do i have to update? and if not, how do i remove the update alert, everytime i log on? thanks
 

A:should i install windows vista service pack 1

Yes. Back up your data first, there ahve been reports of PC's that already have unknown problems getting worse after trying to install SP1. But if it goes smoothly, you will notice a difference int he system.

Even if it goes badly and you have to reload, install SP1, it's a must.
 

Read other 1 answers
RELEVANCY SCORE 70.8

Hi All, I have tried several times to install XP SP2 on a laptop by using automatic (and manual) updates and by downloading the full installer from the Microsoft network site below but it gets it gets stuck while 'checking product key', there is no other error message. I am able to downloads all the files and start the install but it always reaches the product key point and doesn't go past that, I have left the computer on for up to 24 hours with no success. I scanned the computer using windows defender and didn't found any viruses.

Details are: HP Compac NC 6000 laptop
Windows XP Professional version 2002 (SP1)
Intel pentium M 1600 MHz 1.59 GHz 512 RAM

I searched the forum and confirmed the version of the Windows Installer is 3.1.4000.2435, the computer works fine (slow due to only SP 1) otherwise. Any advice would be appreciated, thank you!

A:(Another) unable to install Windows XP Service Pack 2

Welcome back to TSF


Quote:




1) Please go into the CMD prompt.

2) Then type cd \windows\inf and make sure we are in that directory.

3) Then type ren oem*.inf oem*.old, it will go back to the prompt after giving you some error (Do not worry about it)

4) Then type ren oem*.pnf oem*.old1, it will go back to the prompt after giving you some error (Do not worry about it)

5) Then goto start - run - type c:\windows\inf and you will see the files in the folder.

6) Then find the file by name INFCACHE.1 and take a backup of it to desktop (by copying it to desktop) and delete the INFCACHE.1 from c:\windows\inf.

7) Close all windows and reboot the computer to safe mode and start the installation of SP2 and it should go fine.




http://discussions.virtualdr.com/sho...d.php?t=209296

Read other 1 answers
RELEVANCY SCORE 70.8

Need some feedback on whether I should install Service Pack 3 for my Windows XP Home ??

anyone had any problems with update? Anything good about it? any comments are appreciated.

Currently running Windows XP Home Svc Pack 2, Celeron CPU 1.70 GHz, 512 ram, 83% free space.

Tks,
Lora
 

A:Solved: Should I Install Windows Service Pack 3 ???

Read other 13 answers
RELEVANCY SCORE 70.8

I have a Dell 380 with Windows XP Pro. I installed IE8 and uninstalled it but then got error messages saying files such as elua.txt and eencode.dll could not be found. I finally got IE8 working and then installed service pack 3. About then I ran tuneittuilities 2009. Since that time:1. A number of programs won't load: including PSP XI and X2, X1 desktop search, Pixie.2. My IE browser crashes the browser session EVERY TIME I click on a drop down button in ANY site.2. mstml.dll errors and i am unable to re-register.3. Firefox has no problem with downloads but the problem loading other programs persists.I have run: Panda Scan and housecall online scans, GMER (though i couldn't read the results)SuperspywareAvir F-ScanSpybotAdawareAVGWindows Bit DefenderMost fouond nothing but cookies, but Avir when set to the highest screen level found and removed:html/shellcodespr/took-keyviewpck/armadillocrypt xpack.genfralp.pack After this the problem with the drop downs and nonloadng programs continues. I am at my wit's end as I make my living ont he computer and can't work with it like this. Here is the HJT taken just this morning:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 10:59:50, on 10/30/2009Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v8.00 (8.00.6001.18702)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\sys... Read more

A:IE8 Service Pack 3 Install and my XP Pro Windows is messed up

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. You can subscribe by clicking the Options box to the right of your topic title and selecting Track This Topic.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

Read other 2 answers
RELEVANCY SCORE 70.8

Hey, my name is Greg and I am trying to fix my girlfriends computer but am having trouble and wish to seek help. Here is what is happening. The computer is an old Dell Pentium 4 2.0ghz processor with 2GB of RAM and a 40GB clean harddrive. The running programs are the system's required ones along with: Webroot Spysweeper with Antivirus and Google Chrome update check. I installed the operating system with the dell cd and deleted the partition that contained all the bloatware. I updated the system to latest updates including the Service Pack 3. I installed all the necessary programs she would be using and need such as: Webroot Spysweeper with Antivirus, Office 2007, Java, Flash, and Internet Explorer 8 (came with the updates but just clarifying). Everything was working fine. Her and I took a mini vacation to Colorado and her daughter was on the computer and she told me of an error message that kept coming up randomly on her. I told her I would look at it after I came back from Colorado. I come back to find it now has a BSOD with the error message like STOP: 0x00000024. It wouldn't even let me boot into safemode. Fortunately, the dell disc came with a dell utility diagnostic tool. So I did an extended full system scan to ensure all the hardware was properly working. Everything passed! So did a scan disk to make sure, it found 1 error and fixed it. Still the computer comes up with a BSOD before it hits the log in screen. So I took the Dell disc and did repaired the operating syst... Read more

A:Unable to Install Windows XP Service Pack 2

Hello DarkOwnage_

I think midiriya.exe is some sort of malware. You will have to get that cleaned up before trying to install SP2 as it it will not install on an infected system.

Please read ?Virus/Trojan/Spyware Removal Help ? and follow the instructions very carefully; then, post all the requested logs and information in the Virus Help Forum
If you cannot complete any step, just miss it out and do what you can, but be sure to include this information in your post.
Please ensure that you create a new thread in the Virus Help Forum; not back here in this one.

Please be patient, as the Security Team Analysts are usually very busy; one of them will answer your request as soon as they can.

.

Read other 1 answers