Over 1 million tech questions and answers.

Dell Precision M4500 - Wont boot

Q: Dell Precision M4500 - Wont boot

I have 2 M4500, and I have a same problem, when I will open the device, I had seen this message:
No Boot Device Found. Press any key to reboot the machine.
How can I solved it??
Please answer me, I'm really need it.

RELEVANCY SCORE 200
Preferred Solution: Dell Precision M4500 - Wont boot

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Dell Precision M4500 - Wont boot

Hi mahmoud issa,Thanks for posting.Apologies that your system isn't working as expected. Without knowing more details about your system, we can only guess at a solution. Here is some information that may be helpful: http://dell.to/2mORDuu

Read other 1 answers
RELEVANCY SCORE 118

I have had several Dell Laptops (D630, D830, E6410, E6510, Precision M4500), and with the D630 and E6410 Dell was VERY helpful after the warranty expired (in one case by 5 months).. even replaced a system board or 2 since tons of people were reporting issues similar to mine on the D and E series.

NOW
on my Precision M4500, I called Dell 1 day (24 hours) after the warranty expired.

Issue: The system would REFUSE to boot past the dell BIOS splash screen.
It would finally boot after 10 or so power cycle attempts.

Dell refused to "help" me but did give me some advice
now ... 1 month after the warranty expired - the issue is back

System Info:
Dell M4500
16GB DDR3 RAM (Dell Certified) - issue remains when I use the 8gb in my e6410
bluray drive (I also tried to boot using the dvd drive in my e6410, issue remains)
intel 6250 wifi/wimax card
gobi 2000 card
Bluetooth
i7 cpu
NVidia FX 880 gpu
bios level a15
os: dual boot via GRUB - Ubuntu 13.10 and windows 7 ultimate (both 64 bit)

when it does finally boot, I get a message about intel management engine booting the factory image or something to that effect

it will NEVER boot past the bios splash screen on battery only (even with a new battery)
once booted, I can unplug and get about 2 1/2 hours of usage from the pc

I can access the bios settings with no issues - even on the "no-boot" power ups

once it does boot, there are no other issues

NOW:
after reading on the internet I found this to be a COMMON problem
s... Read more

A:Dell Precision M4500 - Wont boot past BIOS splash screen

I now have 2 M4500 that do the same thing. With Intel SpeedStep enabled, it refuses to boot. Both have SSD drives, 16GB DDR3 RAM, NVIDIA FX880 GPU. one has a i7-940 and the other a i7-920. I hope DELL steps up and fixes this issue in A16 BIOS update.

Read other 9 answers
RELEVANCY SCORE 91.6

My laptop's battery 2 not present. Help me!

Read other answers
RELEVANCY SCORE 88.4

Hello, I have a Dell Precision M4500 laptop which stopped recognizing the battery a couple months back. I have had the laptop for one year now with absolutely no problems up until this happened. I am pretty sure the battery is still good, it's not that old, but since the computer wont even recognize it is in, there's no way to check if it can charge. I am running Windows 7 64 bit. Any help with this would be greatly appreciated, maybe there is a fix before I have to shell out the money for a new battery.
 

A:Dell Precision M4500 stopped recognizing battery

Laptop batteries go bad any time, and they are considered to be "consumable" like paper is to a printer. Replace the battery and you should be okay
 

Read other 2 answers
RELEVANCY SCORE 88.4

I just got a new M4500 with a Samsung PM800 64GB SSD and a Toshiba 7200RPM storage drive. Both of these drives are set to non-RAID. I noticed when I went into the BIOS that it was set to RAID On instead of AHCI, even though there is no RAID setup between the two drives.

I ran the CrystalDiskUtility and the most it eeks out is at 94%. The built in Performance Utility in Windows 7 currently measures at 6.7

I was told an SSD should equal out to close to 100% and at least 7.0 as benchmarks if I want to utilize all the performance it offers. Is this the best that it can do?

Any info would be most appreciated. Thanks.

A:Dell Mobile Precision M4500 setup questions

RAID On is the default SATA controller setting in some BIOS, even with one HD,.

Try AHCI first for install.

SSD Alignment
SSD Tweaks and Optimizations in Windows 7

Read other 9 answers
RELEVANCY SCORE 86.8

I Got This Computer 27 Days Ago for Christmas Used it is 6 years old and the warranty expired 3 years ago its an old military rig but ever since i got it i have gotten Blue Screen errors Saying Memory_Management And then it does a memory dump and restarts what is wrong and how can i fix this?

Read other answers
RELEVANCY SCORE 84

I'm posting this more as an observation of things I discovered than as a question, but would welcome feedback from others experiencing a similar problem.
At the Black Friday sales I bought a very nice 32" Asus VA32A 2560x1440 WQHD monitor to use with my Dell Precision M4500 i7 laptop. I was replacing a smaller very old Dell monitor that had a considerably lower maximum resolution.
Almost immediately I started experiencing events daily where the screen would turn a nice shade of mauve in pixelated pattern and freeze, requiring a hard reboot. This had happened on very rare occasions before, but not often enough to investigate. Now it was a constant problem and everything I read online told me it was an overheating issue and not to ignore it as it could destroy the computer.
First recommendation was to clean the dust out of the fan area. Being an old computer there was a lot. I took out the fan/heat sinks cleaned the input and output screens as well as the fan itself meticulously and put it all back together. No benefit; still overheating.
I figured maybe I had accidentally removed come of the thermal grease so took it apart again and replaced the grease where it was previously. Same result - still overheating.
I then bought a cooling fan for under the laptop and made sure that the laptop's own monitor was turned off when the case was closed (I use an external wireless keyboard for this setup... Read more

Read other answers
RELEVANCY SCORE 81.2

Hello everyone,
I have an Dell precision 960 which won't boot, during boot it beeps short twice, and the post lights 1,2,3 are lit, in the manual it says that you have to look on the screen for further problems, but the pc doesn't give video out.
the pc has 16g ram allocated on 1st 4 slots and has a low-end graphics card installed, no DVD, HDD connected to eliminate them.
thanks in advance:
JurgenMK

A:dell precision wont boot

I don't see a Precision 960 listed -- is this an Optiplex 960?  Or is it a Precision 690?
If it's a Precision 690, the very first thing to look for is the presence of bad or leaking capacitors on the mainboard - particularly near the memory socket and CPU socket.  If any are bulging or leaking a brownish substance, the mainboard will need to be replaced.  These systems were very well known for capacitor failures.
There's a set of four diagnostic LEDs on the system -- what pattern of off/green/amber shows on those?

Read other 1 answers
RELEVANCY SCORE 80

So earlier today I was playing a game on my Dell precision T5510 and all of a sudden it powers down and wont boot back up...every single time i turn it on it shows led # 3 and 4 blinks number 4 twice then turns on led 1 and never continues..I have a Geforce GTX970 in the PCI connector and it has both processor sockets full and has 8GB RAM per core...and from the error sheet provided for the computer it states that it has something to do with the memory. Please tell me if im doing something wrong because tech support has been one massive circle.

Read other answers
RELEVANCY SCORE 80

Hello im new in this forum, and was wondering if anybody can help with my problem,
this morning i took my computer apart to clean it, (which i have done several times)
and the computer wont boot, i dont have any diagnostic lights on, the power button is solid amber color.
i tried disconnecting every piece of hardware to try to see if its a hardware issue and even with everything unplugged same thing, solid amber light with no diagnostic light and no beeps (i think there is no internal speaker) i have repeatedly check all connectors.
**I am somewhat techsavy

Thank you for your time!

Read other answers
RELEVANCY SCORE 74

Described here. I have a problem with finishing work on "unknown device". For a moment, after installing from the DELL (www.dell.com/.../advanced) driver "ST Microelectronics Free Fall Sensor Driver ", file DRVR_WIN_R309372.EXE Device Manager has stopped showing that there is an" unknown device "in the configuration. After updating to "ST Microelectronics Free Fall Sensor Driver", the Chipset_Driver_RCHTX_WN_2.00.10.34_A11.EXE file, from the same DELL page, again appeared in the configuration unknown device.
I decided to remove the ST Microelectronics Free Fall Sensor Driver from the system via the Control Panel to install only DRVR_WIN_R309372.EXE. Unfortunately, the installation can not be resumed, the message "Found incompatible installation of, Version. Please uninstall it via Control Panel Add / Remove Programs before installing this version of Accelerometer". The problem is that Control Panel no longer shows this application. Suspecting that there were some traces left after the previous installation, I tried to remove them from the File Manager and also edited the registry. In the registry I searched for: "R309372", "RCHTX", "Microelectronics", "AccelerometerP11", "Freefall". I deleted the entries containing the above characters. I would be grateful for directional guidance on how to proceed further. I am using Windows 10 64 bit Dell Precision M4500.

Read other answers
RELEVANCY SCORE 74

When I press the power button the wi-fi light turns on and the HDD spins, then the fan spins for a second then shuts off. Then the 3 blue lights (number lock, caps lock, scroll lock) at the top of the keyboard light up. The two on the right stay solid but the number lock blinks. The screen stays dark the entire time.
 
There was no trauma the the laptop that I know of, and it worked property last time I used it (last week). 
 
I have tried removing and re-installing the processor, ram, hdd, dvd drive, battery, and every combination I could think of. Another site said the flashing numberlock indicated a need to reset or replace the processor or the motherboard. 
 
Any suggestions would be very appreciated. I appologize if I forgot any details, thank you for your time. 
 
-G.

A:Dell m4500 laptop won't boot, no bsod, no bios, no splash

You pretty much covered everything. If you have more than one RAM stick try only one and swap slots. If that doesn't work try the other stick and swap slots.
 
Have you tried a powercycle. Pull the battery and power adapter. Hold the power button down for 30 seconds. Replace the power adapter but leave out the battery and boot.
 
Sometimes a bad CMOS battery can make things flaky.

Read other 4 answers
RELEVANCY SCORE 71.6

I have this M4500 which is quite a trusty computer with a great keyboard. It's just a fun computer to use and still runs my apps really well. In many ways the experience of using this computer is better than more recent counterparts. 
The one thing this computer doesn't have going for it is the LCD, it has pretty bad viewing angles by today's standards and the colors are noticeably off. So I'm wondering, is there an LCD out there that is newer and would be a drop-in replacement for this one? I have the 1080p screen on this.
I actually bought an LCD with a 30pin input, and it didn't work, so I'm asking in here in hopes that somebody out there has done this or worked on a similar model.

Read other answers
RELEVANCY SCORE 70.8

Intel I7 CPU - Original problem was BIOS did not detect the SATA drive. I could access the drive on another computer and see three partitions under ‘Disk Management’. I formatted the Primary Partition on another computer as NTFS. BIOS now sees the SATA drive and I see three partitions when I try to load Windows. Error – “Windows cannot be installed on this drive. The selected disk is of the GPT partition style. Default BIOS sets drive to RAID. AHCI gives same results. Same error when USB drive with Windows loaded on it is selected as target for installation.

A:Precision M4500 - Unable to reload Windows 7 Professional

The Windows 7 bootable USB needs to be FAT32 formatted and setup for the GPT partition scheme using the likes of Rufus. See here for details:
https://www.youtube.com/watch?v=lg8Oebhc3EI&list=PL1RkaknDn7v82tfEmxGgycwJJvJ0xGoqZ&index=2
It also has to be 64 Bit. 32 Bit is not supported with GPT.

Read other 2 answers
RELEVANCY SCORE 70.8

Is the accelerate function of Intel Rapid Storage Technology available on a Precision M4500 with A15 BIOS?

A:Precision M4500 & Intel Rapid Storage Technology

If the system has both a hard drive and an mSATA solid state drive, it should be, yes.

Read other 2 answers
RELEVANCY SCORE 68

HI.
I was trying to use the fingerprint swipe reader on my laptop. It turns out it is useless except with the wave security software except for logging into the computer itself. It will not work with internet explorer, network logins or other applications.
A full description is here: http://notebooks.bigresource.com/Dell-New-Fingerprint-Reader-Owner-039-s-Must-Read-joChMJo1.html
On win7 32 bit, apparently Wave's PIM (Personal information manager) and Document Vault work. Wave software is notorious for being a complete useless, bloated piece of code that does nothing but slow down your system to a crawl. On 64 bit systems, they do not provide PIM or DocVault at all. Emails from them have confirmed they do not provide it, and maybe they will at some point in the future but not really.
The big problem is dell uses a fingerprint reader that is not compatible with the Windows Biometric standard. Why they do this on the precision is beyond me. I think some other brands are affected, but I used to have a Latitiude with a reader that did work as a WB. The implementation problem seems to be because the fingerprint sensor is slaved to the Broadcom USH device. As a non-standard, proprietary system, there are no software implementations from anyone (think PSQL 2009, an excellent program for this purpose). Not because they don't want to but because they can't get to the sensor. Even Wave, the one that has the rights to develop for this sensor, does not do it for W7x64... Read more

A:FINGERPRINT READER USELESS ON PRECISION M4500 W7-64bit BROADCOM CHIP WAVE SECURITY

I'm having the exact same issue here. I'm wondering, there were 2 fingerprints to select when buying the laptop. I got the cheaper one. Would the expensive one be one which is supported by the biometrics framework?

Read other 11 answers
RELEVANCY SCORE 64

Described here. I have a problem with finishing work on "unknown device". For a moment, after installing from the DELL (www.dell.com/.../advanced) driver "ST Microelectronics Free Fall Sensor Driver ", file DRVR_WIN_R309372.EXE Device Manager has stopped showing that there is an" unknown device "in the configuration. After updating to "ST Microelectronics Free Fall Sensor Driver", the Chipset_Driver_RCHTX_WN_2.00.10.34_A11.EXE file, from the same DELL page, again appeared in the configuration unknown device.
I decided to remove the ST Microelectronics Free Fall Sensor Driver from the system via the Control Panel to install only DRVR_WIN_R309372.EXE. Unfortunately, the installation can not be resumed, the message "Found incompatible installation of, Version. Please uninstall it via Control Panel Add / Remove Programs before installing this version of Accelerometer". The problem is that Control Panel no longer shows this application. Suspecting that there were some traces left after the previous installation, I tried to remove them from the File Manager and also edited the registry. In the registry I searched for: "R309372", "RCHTX", "Microelectronics", "AccelerometerP11". I deleted the entries containing the above characters. I would be grateful for directional guidance on how to proceed further. I am using Windows 10 64 bit Dell Precision M4500.

A:Precision M4500, Windows 10, "unknown device" problem

PiotrMak,Unfortunately, there are no Windows 10 drivers  available from Dell on the M4500 system.

Read other 1 answers
RELEVANCY SCORE 63.2

Hello,
I tried to install the newly released Dell Precision Optimizer v3.5.5 (A00) August 18, 2016 on my Precision 5510, running Windows 7 64bit.
During the installation, an error panel pops up with this text:

> SetupNew\setup.cpp (140)PAPP:PVENDOR:PGUID:[email protected] Vista Service Pack 1 (7601)IE Version: 9.11.9600.18426
The installation then fails and the installer log shows the following:
[08/25/16 13:16:06]    Open file: C:\ProgramData\Dell\UpdatePackage\Log\Application_KKJH9_WN32_3.5.5_A00_2016-08-25.txt[08/25/16 13:19:12]    User Command: attended[08/25/16 13:19:12]    DUP Capabilities Value: 2097151 (0x1FFFFF)[08/25/16 13:19:12]    DUP Vendor Software Version: 3.5.5[08/25/16 13:19:12]    Local System/Model Compatible with this Package? Yes[08/25/16 13:19:12]    Local System OS Version: 6.1.1.0[08/25/16 13:19:12]    OS Compatible with this Package? Yes[08/25/16 13:19:12]    Local System OS Language: DE[08/25/16 13:19:12]    Language Compatible with this Package? Unknown[08/25/16 13:19:12]    User Parameter: logfile[08/25/16 13:19:12]    User Parameter: logfile changed to: C:\ProgramData\Dell\UpdatePackage\Log\Application_KKJH9_WN32_3.5.5_A00_2016-08-25.txt[08/25/16 13:19:12]    Extraction-miniunz path: C:\PROGRA~3\dell\drivers\APPLIC~1.5_A\miniunz.exe[08/25/16 13:19:12]    Extra... Read more

Read other answers
RELEVANCY SCORE 63.2

My precision 690 witch I am resurrecting to act as a server/nas . It powers on but does not connect to the screen the power switch appears not to work, I tried to reset the bios switch and changed the battery. To no avail. Just plugging in the power starts the machine and the fans seem to run at high speed, is the m/board
broken or is there a way to sort it, I also tried different VGA cards none worked. Looking for help. Thanks in advance. Stephen
 

Read other answers
RELEVANCY SCORE 61.6

Hi Guys,
I have acquired a Dell Precision 590 workstation which has a boot issue that I cannot seem to solve.  The machine goes through it's POST and boot procedures and I receive messages stating that it cannot find SATA 0 or SATA1 it then gives me the option to press F1 to continue or run setup.  After I press F1 the machine continues to boot into Windows normally.  I cannot seem to get the machine to boot straight into Windows without pressing F!.  I'm not sure how to correct this issue and would appreciate any assistance you can provide.  I realize that this machine is a bit old but I would like to get it up and running correctly so that I can reinstall Windows and drivers.  Despite it's age this machine still has considerable processing power.and I would like to get it working if possible.  Thanks for the assist.

Read other answers
RELEVANCY SCORE 61.6

I have a Dell Precision Workstation 390. When I boot system, first the fan is loud, then it quiets down, then the startup screen appears with the dell logo and the usual F2, F12 options and then the fan revs up and that's it. Power button is green. System is rarely used, purely a backup system in case my main system, its clone, ever fails so no dust. Every so often I start it up to make sure it is working and to update Windows, Norton etc.
How do I proceed from here?

A:No Boot, loud fan, Dell Precision 390

Any beeps from the tower? If you press F12 at boot, can you to get a menu with options to run the diagnostics?
What color are the diagnostic LEDs on the front panel?  If they don't all go off, look up error code in the manual:
downloads.dell.com/.../precision-390_setup guide_en-us.pdf
When was last time you replaced the motherboard battery?

Read other 3 answers
RELEVANCY SCORE 61.6

Sometimes this causes a reboot. Other times the computer just locks up with a distorted lock screen.

SF Diagnostic zip attached.

A:BSOD When Idle on Dell m4500

The SF Diagnostic zip file is missing the dmp file, please supply this if possible.

Read other 6 answers
RELEVANCY SCORE 61.2

Older desktop running XP Pro. Had some problem booting yesterday; and today am unable to boot up at all.
Problem area seems to be the CD drawer.

Fairly sure that boot sequence is CD then C and then perhaps A (diskette drive).
Yesterday, it took several tries to boot the desktop, and I noticed that the green light on the CD drawer often kept flashing even after I had been successful. I ended up using a paper clip to open the drawer and left it open for the remainder of the day.

Today unable to boot successfully.
At one point screen showed some brief text, I believe whatever is typical at starting up sequence, but this immediately went dark. It seemed like the CD drive and drawer were trying to be accessed.

After several abortive attempts, I did a text message with something like
I believe Checksum error or Sum error but very far from being completely sure on what error code.
Previous attempts at starting computer have failed, please contact Dell for support.
While yesterday I had been successful at some point in getting CD tray to stay in the open position, and not keep closing - today I have been unable to do so.

============
At some point I should replace this old machine. If I can get it up and running again, I expect that I should take the CD drive out of the boot sequence (or put it after C drive).

I do not have any bootable CD at the office, and not sure if I have one at home either (this is computer I used to use at home and now have in office).

Thanks for any s... Read more

A:Unable to boot desktop (Dell Precision 450)

Read other 9 answers
RELEVANCY SCORE 61.2

I have a new Dell Precision T5600 workstation with A11 bios. I want to use network boot. F3 does not work. Going into the bios system setup (with F12) and changing the boot sequence to put the onboard NIC first did not work. Any clues?

A:Dell Precision T5600 network boot

Never mind, I stumbled across the bios setting. The Onboard NIC has to have PXE enabled before it will show up as a boot target.

Read other 5 answers
RELEVANCY SCORE 61.2

Hi Guys,
I have a Dell Precision 690 Workstation.  I want to reinstall Windows 7 but the CD ROM does not appear in the Boot Menu.  The drive is visible from within Windows, so I'm at a lose as to why it's not listed as a boot device.  Any help you can provide would be appreciated.

Read other answers
RELEVANCY SCORE 61.2

We have quite a few Precision 3510 devices running Windows 10 (1607)
Some of them are locking up on the users
Some of them are hanging when it tries to load windows
I have read articles that there is a windows update causing this but I have been unable to validate.

Anyone with any experience please respond.

Thank You,
Jason

Read other answers
RELEVANCY SCORE 60.8

Has anyone ever seen this (in the attachement)? I have tried updating different graphics drivers. Also this problem only occurs in certain resolutions. The computer is an m4500 with a docking station. I have tried 2 different docking stations.

Thanks

A:[SOLVED] Dell M4500 Graphics problems

Hi see if the info here can help you Your Desktop Icons Are Missing in Windows XP

Read other 8 answers
RELEVANCY SCORE 60.4

Hi,
I just got a new Precision 7510 and can't figure out how to get it to enable numlock automatically on boot.
I checked the BIOS and that is enabled already.  
I would like this as I am running WIndows 10 and it is setup to login with a numeric PIN.
Does anyone know how to do this?
Thanks,
Jim

Read other answers
RELEVANCY SCORE 60.4

So I got the TB16 to use with my Windows 10 Precision 7510. I've had issues with the USB devices dropping out randomly but I seem to have got that under control (for now). I'm having another issue of sorts. Updated the BIOS then went into the BIOS changed restart/shutdown to "thorough" and checked "thunderbolt adapter boot support" and "thunderbolt adapter pre boot modules" as I wanted to boot from a USB DVD drive that was connected to the TB16. But when I tried to boot the laptop got stuck on the Dell logo and wouldn't go into POST. I tried diagnostic boot and got the same result. Couldn't get far enough to press F2 or F12. When I disconnected the TB16 and powered on the laptop it booted up fine. I could then connect the TB16 and it would work fine. But if I tried to restart with the TB16 connected I had the same issue. I eventually unchecked "thunderbolt adapter boot support" and "thunderbolt adapter pre boot modules" just so I could restart without having to disconnect the TB16 (I don't know which of the two options is causing the booting issue though). I can get by without booting from the TB16 but I got it partly for that reason so would to get it working if I can. Any ideas?

A:Dell Precision 7510 TB16 Boot Issues

n00b2
So I got the TB16 to use with my Windows 10 Precision 7510. I've had issues with the USB devices dropping out randomly but I seem to have got that under control (for now).
It might be if the devices are intermittent, they would exhibit problems during a Pre Boot Scan.
I wanted to boot from a USB DVD drive that was connected to the TB16. But when I tried to boot the laptop got stuck on the Dell logo and wouldn't go into POST.
You are wanting to boot a UEFI capable DVD, such as the Win 10 Install media, connected to the TB16?  If that is the case, I can test to see if I can do it.  I am wondering if the Thunderbolt is connected to the PCIe bus if any device there will be checked for boot compatibility.  
I suppose you can boot from that USB DVD when connected directly to your system?

Read other 1 answers
RELEVANCY SCORE 60.4

I am trying to get my computer to boot up using only one hard drive. Currently it will only boot up
if all 3 drives are connected. I am sending a screenshot of the disk management screen so
someone with know how can diagnose why all 3 are interconnected and need each other.
I bought a stand alone drive copier to copy my hard drive to a larger drive. I would like to make the copy of the "C" drive on the 250 gb. drive shown but I think if I change something on that drive the comp. will not boot at all.
I hope that i conveyed this so that people can understand because it is somewhat confusing. My computer skill level is decent but i need assistance on this.
I would add a second drive once I clear this up.

Thanks,

Joe

A:dell precision 380/ win 7 / 3 hard drives all needed to boot

Because you have all three drives with a partition marked Active. Windows thinks all three are needed for boot when they're marked active. You need to mark the other two partitions on other two drives as "Inactive". Leave drive C "boot" partition as active.

Partition - Mark as Inactive

Read other 9 answers
RELEVANCY SCORE 60

how to connect 4.1 creative M4500 subwoofer to dell N5010 lap coz my lap have not 2 3.5mm jack only have mic and line out jack so if there is a method to connect this sub plss help me

A:how to connect 4.1 creative M4500 subwoofer to dell N5010 lap

Quite simply you don't without using a stereo splitter,

How to connect Creative Inspire M4500 4.1 speakers ?

Read other 3 answers
RELEVANCY SCORE 59.6

Hi everyoneI bought last week DELL T-5810 workstation. It has Xeon E5-1620v3 (3.50GHz) , 16GB RAM (DDR4 – 2133MHz), 1TB / 7200rpm and I added an TRANSCEND SSD 220S TS480GSSD220S, 480GB, SATA III, 2.5' on it.
I have clean install of windows 10 on it.
My problem is: Whenever I press power button to start the computer, it take 27 seconds (measured with stopwatch) to display the DELL logo and 1 minute to get until the windows lock screen.I tried to change different settings in the bios (i have the latest bios version A16), without any luck. I run diagnostic tests from bios and on dell website , but all tests are passed, and no matter what I did, the DELL logo is always shown after 27 seconds.Also, I found this post which is for laptop machines, but the issue that people are describing here, are prety much the same with mine. Ho help from ther either.When computer starts, it is very, very fast, and I have no complains there. But it is not acceptable for +$2000 computer to boot in 60 seconds. At hime, I have 2 other DELL work stations at home (2 and 3 year olds), which boot in less than 15 seconds.Can anyone help me to resolve this issue?

Read other answers
RELEVANCY SCORE 59.2

I want to install a new SSD Samsung V-nand 850 EVO in a Dell Precision M6500.
I clooned the hard drive. The bios is AHCI.
When i boot the SSD from the Dell Precision M6500 i got the message "inaccessible boot device"
When i boot the same SSD from other Dell (par exemple Inspriron R17) the disk is booting with no problems
The prosed repair didn't worked, the SSD is recognized in the BIOS and DOS-prompt accessible (letters X en E).
So i think it should be a BIOS problem or a driver issue.

Any idee how to solve the problem ?

A:Dell precision M6500 and new SSD Samsung V-nand 850 EVO - INACCESSIBLE BOOT DEVICE

Was the drive cloned in AHCI mode?  Once the cloning was done, did you remove the original hard drive and install ONLY the cloned drive for the first bootup?

Read other 1 answers
RELEVANCY SCORE 59.2

I've got a Dell Precision 7710 with the Dell Precision Optimizer. It works great for when I'm using AutoCAD Civil 3D in setting up the laptop for optimization by turning off 2 cores and increasing the clock speed of the processor. 
Unfortunately I also do programming with Virtual Machines. When I'm in this mode I want all 4 cores to share the load instead of 2 cores. 
Is there a workflow available to go from one profile to no profile? Do I have to do a restart to switch between profiles? So if I'm doing CAD work and then switch over to programming do I have to turn off the AutoCAD profile to no profile and the restart the computer? I tried turning off the profiles and nothing changes for the cores. 
Is there a way to create my own profile? Or should I pick one like 3ds Max that would utilize more cores?  Or should I not use it since it won't meet my needs? 
Thanks.

Read other answers
RELEVANCY SCORE 58.4

Hi, 
I am having a problem with a precision M6700 with a Nvidia K4000m. I installed Windows 10 Pro in the UEFI mode and Legacy ROM enabled. Later, i enabled secure boot from the BIOS and now there is no display. Tried resetting by removing power and removing CMOS battery. No change.
Need immidiate assistance.
Thanks.

A:Dell Precision M6700 Nvidia k4000m no display at all after enabling Secure boot

Sounds like a tough one. Your support site has articles & threads about it.
http://www.dell.com/support/home/us/en/19/product-support/product/precision-m6700/research
Precision M6700 Support site

http://www.dell.com/Support/Article/us/en/19/SLN85632
Computer Does Not Turn On Or Go Into Windows
=== Quote ====
No Video
If the power indications are normal but there is never any video seen on the computer's display during the startup process, this probably indicates a No Video issue.
If you have a desktop computer and the monitor has its own power supply, make sure the monitor has a power indicator showing that it is turned on.
To troubleshoot a No Video issue, click on the links below:

Desktop
Notebook

For a notebook, press and hold the Fn key and then press the power button. This starts the pre-boot testing and will launch ePSA. ePSA will test video with a series of patterns. If they look fine but you want to test more, you can respond to the video test with "N" and ePSA will then launch the LCD BIST test. If you have a no video issue, you can either run the Fn+Power to enter ePSA or D+Power to run the LCD BIST.
=== EOQ =====

http://www.dell.com/Support/Article/us/en/19/SLN292599
Resolve No Power, No POST, No Boot or No Video issues with your Dell Computer

http://en.community.dell.com/support-forums/laptop/f/3519/t/19596949
Laptop M6700 Screen goes blank
Cure: Update the BIOS. Also suggests plugging in an external monitor.

Read other 1 answers
RELEVANCY SCORE 58

Hello,
I'm facing the following issue with a Dell Precision 5510 laptop with latest bios 1.2.14 A13. It appeared suddenly, I just rebooted a working system.
The laptop does not boot anymore and the Dell logo is not shown, however, the diagnostic battery led blinks 2 times white and 2 times amber.
According to the error table that I found here http://www.dell.com/support/article/uk/en/ukdhs1/SLN295101/EN#2016_to_Present that means
System Board : BIOS, ROM Failure
and the suggested next steps are:

Flash BIOS to latest revision
If problem persists contact Tech Support for further troubleshooting
Did anyone had a similar experience?
How can I re-flash the BIOS from a non-booting machine?
I found some tricks for the Dell XPS 9350 (extracting HDR and ROM files from bios executable and plugging a USB drive) but they do not seem to apply to this laptop.
UPDATE
I found http://www.dell.com/support/article/uk/en/ukdhs1/SLN300716/en but I'm still unable to recover the computer. I keep getting the 3:3 blinking pattern, even after I put the latest BIOS (renamed to 'BIOS_IMG.rcv') into a newly formatted FAT32 USB stick (2 GB). I also tried with different USB sticks, and both USB ports.
Any help is really appreciated
Best regards,
alessioc

Read other answers
RELEVANCY SCORE 57.2

This is how I got my T5600 to work from a SSD SATA connected to a PERC 310H card and boot as UEFI. It can also be a SAS drive. In this example I was only using a single drive and have not attempted a RAID setup. 

I may have skipped some parts where you have to reboot. If I refer to the BIOS settings then you would have to reboot first. 

1. Setup hard drive as a NON-RAID drive. When booting it will appear as BIOS handled and NON-RAID.
2. Download the Windows 10 installer onto USB using Microsoft Media Tool.
3. Download the DELL T5600 Payload for T5600 and BIOS files (if needed). Install latest DELL BIOS if you have an existing older OS. 
4. Unzip the DELL driver payload onto the USB drive for Windows 10 and leave inside a folder called T5600.
5. Using a rear USB slot that is NOT USB 3. Go into F2 and load the USB stick under UEFI, it may have a strange name if the BIOS is old (such as INT13). Saqve changes. Reboot. Boot from the USB stick. 

6. Make sure the drive you are working on does not contain data you want to keep. Ideally you would disconnect any drive you dont want to accidentally alter. 
When given the option to select a hard drive, if necessary, delete any previous partitions so the drive is without any partitions. Then click the * NEW button. 
7. After clicking NEW it MUST generate 4 partitions, 3 system partitions + 1 OS partition (made by Windows installer). If it only has 2 partitions it will never work as a UEFI boot volume
8. In... Read more

Read other answers
RELEVANCY SCORE 56.8

whenever i switch on my dell studio 1737 laptop it wont go past the dell logo stage.
any help out there on how to fix the problem?
at the moment i am running a diagnostics test and seems like most devices are passing the test.
Michael
 

A:dell studio 1737 laptop wont boot past dell logo

It could be any number of things but my first 2 guesses are possibly the hard drive or motherboard.you might want to take it somewhere so that you will get a correct diagnosis.
 

Read other 3 answers
RELEVANCY SCORE 56.8

Hi recently my Dell 2330 wont boot up properly. I press the power button and the light comes on the button and i hear the fan. The screen is a brighter black then after a few seconds the screen seems to go off but still power and fan running. Ive spoken to Dell and done all what they asked. Then today out the blue it came on as normal. I went to run a diagnostics test from a link Dell sent me and it asked me to restart the computer. I did and then it  did what it did before and has not come back on since. They have said it could be the motherboard. Any other suggestions ? Thanks

Read other answers
RELEVANCY SCORE 54.8

I have search for many hours for answers to questions on new Graphics Cards which require 8pin and 6 pin or 8pin and 8pin power connections aside from the motherboard supplied power and what the appropriate method was to connect the GPU cards to the 8 pin pcie power connections. This is complicated by the fact that the Precisions seem to only have 6pin cables installed with the towers regardless of the power supply that is installed.   Yes. Everyone understands hopefully that if you have, for example, a 450 watt power supply ( forget the efficiency aspect of the actual power supply) as I am interested in the mechanics of the  design.
The power supply connects to a PC board, which appears to be called "Power Supply extended card"
Now, looking at the connectors on this extended card, there is a "POWER_VGA1" 8pin connection on this extended card (bottom left black socket).  To this 8pin connector, on my T5600 and seemingly on all the others that have made similar inquiries, we all have a 8pin male connector that fit into the extended card. My 8pin connector has two sets of wires leaving the connector and becoming two 6 pin connectors, one of which 6pin connectors is plugged into my stock Quadro 5000 video card.
OK. So, now most people are wanting to change out the 6pin Quadro card with either an 8pin or 8 pin plus 6pin or 8pin and 8pin graphics card such as a GTX 980TI or GTX 1080 or GTX 1070 or AMDs similar card. 
Having researched the... Read more

Read other answers
RELEVANCY SCORE 52.8

dell sign comes on along with progress bar the bar goes about 3/4 of the way then every thing shuts down  cant get to safe mode but can get to boot options and setup

A:dell all in one wont boot

Hello, to BleepingComputer!
 
When you are in the bios, which is the boot options/setup screen, does the computer stay running? Do you see a drive that you can set it to boot from?

Read other 8 answers
RELEVANCY SCORE 52.8

Can any one please help, i have a Dell Dimension 2400 that i am checking out for some one, i t will not boot up at all it just gets to the Dell logo and hangs there.

It does not see the hard drive, the Floppy, or the CD ROM.

Can any one tell me what i can possibly to do to find the problem, and re install windows XP Pro.

The only options i get on screne are F2 to enter set up, and F12 to enter boot menu, the varius option to boot up are ie....

1 Normal
2 Hard disk drive c:
3 IDE CD - ROM Device
4 Diskette drive
5 System Setup
6 IDE Diognostics
7 Boot utility partition.

Systen diagnostics checks disk and gives message "pass"
Optitions 1, 2, 3, 4, 5,and 7 all give message press f1 to continue, but then i get error message saying "Error loading Operating system"

Any help would be greaqtly apreciated, i am well and truly stuck. Thanks.
 

A:Dell wont boot

Do you have the Windows XP installation disk?

If you do, change the boot order to look at the cd-rom first and boot from the install cd.
 

Read other 2 answers
RELEVANCY SCORE 52.4

Hello
I just swapped out a e5-2603 CPU and installed a e5-1620 CPU in a Precision T5600.  The PC will not boot, and prior to a forced entering to bios setup, it gives a warning/error
"Your dell current power supply does not support the recent configuration changes made .."
My PSU is a 635W - this should be sufficient, yes??
So is the 1620 not compatible with this model?
thanks for any help, david

Read other answers
RELEVANCY SCORE 52.4

Dell Precision M6400 Win7 64 bit Dell Webcam Central Software.
Long story short, just purchased a M6400, upgraded after purchase with SSD, clean install. Cant Find Win7 64 bit Dell Webcam Central Software.
Please help, no I cant go in to my account and download due to my laptop transfer has not yet cleared.
Webcam is recognized in windows configuration, but not in dell. Already removed win software, but I have no way or nothing to replace with.
 
PLEASE Help  

A:Dell Precision M6400 Win7 64 bit Dell Webcam Central Software Missing

Hi hdpartman,
If the webcam is not working, I recommend uninstalling and reinstalling the webcam drivers.
To uninstall the Dell webcam central software, perform the following steps:

Click Start.
Click Control Panel.
Using the drop-down menu next to View by: in the upper-right corner, select Large Icons.
Click Programs and Features.
Click Dell Webcam Central.
Click Uninstall.
Confirm the uninstall process by clicking OK.
Once uninstalled restart the computer.

I have provided a link below to reinstall the webcam drivers.
http://dell.to/YZkDs3
Awaiting your response!

Read other 5 answers
RELEVANCY SCORE 52.4

I am wondering if a single stick 16 GB RAM DDR3 would be OK for a Dell precision 7500 or 5500. These machines are without RISER. In page 4 of the service manual it states:
NOTE: If any DIMMs are >30mm tall (possible early 16GB DIMMs), they must be installed on the system board only.downloads.dell.com/.../precision-t5500_setup guide_en-us.pdf
has anyone tried with a single stick of 16GB memory? For example I found one here [1]
www.newegg.com/.../Product.aspx

A:single 16GB DDR3 in a dell 7500 or dell 5500 precision

You cant install random density and rank of ram.  Ram must be installed in banks of 3.
http://downloads.dell.com/Manuals/all-products/esuprt_desktop/esuprt_dell_precision_workstation/precision-t7500_Service%20Manual_en-us.pdf
 
You cant install a  4 gig then 8 gig then 16 gig.   If you use 16 gig modules they must ALL be 16 gig modules.  You cant mix ranks and density and speed.
 

Read other 1 answers