Over 1 million tech questions and answers.

Startup problem - STOP: c0000005 error

Q: Startup problem - STOP: c0000005 error

My computer froze and when i restarted, i keep getting this error after the Windows startup logo
STOP: c0000005 The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s
 
I tried the Startup Recovery but im stuck in a loop. Nothing gets fixed
I tried using bootrec to fix the MBR and still nothing
This isnt a hardware issue. I used another hard drive and the computer works fine. The original hard drive itself is healthy when tested using a utility. I even made a clone of the original hard drive and the cloned drive also displays the same problem
 
Please help?
 
 

RELEVANCY SCORE 200
Preferred Solution: Startup problem - STOP: c0000005 error

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Startup problem - STOP: c0000005 error

A search at the MS web site for this code results in the
http://www.microsoft.com/en-us/search/results.aspx?q=0x000000c5
They have fixits there that you can run to try fixing the problem.
 
Good luck.

 Back to top
Quote
MultiQuote
Edit

 

 

Read other 3 answers
RELEVANCY SCORE 53.6

hI....
I use windows XP SP1 (or should I say, I USED TO)... Well i installed SP2, when I restarted the system, i get a stop error report, This here is a an error message that I receive before the system restarts again... Its a stop error which says "Incosistency detected in the PCI Bus Driver's internal structures...
Technical information is:
STOP:0X000000A1(0XDEAD0010, 0X81B03DF0, 0X00000000, 0X00000000)
I don't know what that means but... Does it help?
I tried booting on safe mode, but same story... Is there anyhow i can restore my SP1, i MEAN I CAN'T get into the system at all...
PLEASE HELP!!!!

Read other answers
RELEVANCY SCORE 53.6

so im getting a blue screen , Stop 0x00000050, i had just installed AMD dual core optimizer and restarted my machine, and now i cant boot into windows normally, i can only operate in safemode.

any thoughts as to how i can fix this?

thx in advance

A:Stop Error On Startup

It runs in safemode probably because the optimizer isn't loading in safemode. Try uninstalling it while still in safemode and see if that solves the problemSome discussion about it here:http://www.xtremesystems.org

Read other 9 answers
RELEVANCY SCORE 53.6

I have a problem with AOL. It starts and then turns itself off with the message Error C0000005
 

A:Aol error message C0000005

Error messages:
https://help.aol.com/articles/aol-desktop-software-error-messages

Support: https://help.aol.com/contact/
also 1-800-827-6364
 

Read other 1 answers
RELEVANCY SCORE 53.6

On system running XP problem with various applications not starting up (AOL, roadmap software etc.) with display of above error. Have not installed new software. Error occurs as soon as system attempts to start the program. Also it is not possible to uninstall or reinstall AOL (for instance).
Going back to system status as of a week previous allowed at least reloading of AOL. But then then the same problem recurred.

Any ideas for the not very computer literate?
Is it worth trying out one of these services, which purport to find dll errors and fix them?

Any help appreciated.

Jutta & Chris
 

A:Error C0000005 with mshtml.dll

A little more info would help us a lot here.

What OS are you running?

What is the full and exact error message?

What applications cause this error?

Cheers mate!
 

Read other 3 answers
RELEVANCY SCORE 53.2

Hello, my windows XP laptop has suddenly started bringing up the error message;

STOP: c0000135 {Unable To Locate Component}
This application has failed to start because winsrv was not found. Re-installing the application may fix this problem.

However- when I searched this up I found people who shared this problem got the error message while the computer was running (that I've seen)- the problem is, when I start my laptop up, I get boot up screen as always- then the windows XP loading screen- it takes longer than usual before, up comes a blue screen with this message. I've no idea how to even begin fixing it, since I can't even get to the desktop.
Any help at all, is very much appreciated, thanks.

A:STOP: c0000135 error during startup

Did you try to boot in safe mode?

Read other 5 answers
RELEVANCY SCORE 53.2

Hello, so after I used Driversweeper to get rid of my old NVIDIA drivers and rebooted - I got a stop error.(STOP: 0x00000007E (0XFFFFFFFFC0000005....) I can't even boot in safemode!? I am so frustated, I do not know what to do?
 

A:Solved: STOP error on startup!...

Read other 16 answers
RELEVANCY SCORE 53.2

Hey guys, went to turn on my PC this morning and I get this message (I'm currently using a computer at my local library trying to figure out how to solve the problem):


Quote:




A problem has been detected and Windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check for viruses on your computer. Remove and newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

Technical information:

*** STOP: 0x0000007B (0xF9E48640, 0xC0000034, 0x00000000, 0x00000000)





I ran the chkdsk program 3 times, each through my Windows installation. I tried running "chkdsk /f" at the prompt but it said the given parameter was invalid. Everytime I reboot my PC this screen appears, and nothing that I've done or can think to do has fixed it. I could really use a hand though in helping to sort this out, I'm not exactly what caused this problem, although I have had to run the chkdsk program a lot lately as my XP frequently freezes on the "Welcome" page, forcing me to boot using the XP CD and run the "chkdsk /r" at the prompt.

Anyways any help on how to solve this would be really appreciated, thanks a lot guys! smile.gif

A:Windows XP startup help (Stop error)

Yikes ... that problem usually refers to an inaccessible boot volume error. You said you tried "chkdsk" in recovery console. You may also want to try doing a "fixboot" as well as a "fix mbr" in the recovery console. They will give you an error message that it may corrupt your drive, but I have NEVER seen it do that.

Also, have you added any new hardware (internal or external) to your machine? If so, try removing those and see if the problem continues.

Often times, I've seen this end up being a physical problem with the drive. If I'm wrong about this and a hardware TSF mentor stops in, please correct me.

Try both of those, and let me know how they work.

Read other 1 answers
RELEVANCY SCORE 53.2

On startup after the initial Dell logo and such, it comes up with the "Windows Error Recovery" screen, and displays "Launch Startup Repair" and "Start Windows Normally", neither work.
When you hit F8 it does come up with the Startup Options, but none of the options work, including Repair My Computer, and Last Known Good Configuration.
 
When you select Launch Startup Repair from the error recovery selection, it loads a bit, then goes to a the BSoD (Stop error screen) and displays the following:
 
 
 
A problem has been detected and windows has been shut down to prevent damage to your computer.
 
PAGE_FAULT_IN_NONPAGED_AREA
 
If this is the first time you've seen this Stop error screen, restart your computer.  If this screen appears again, follow these steps:
 
Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.
 
If problems continue, disable or remove any newly installed hardware or software.   Disable BIOS memory options such as caching or shadowing.  If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
 
Technical Information:
 
*** STOP: 0x00000050 (0x8E5C0000, 0x00000000, 0x8A844B33, 0x00000000)
 
 
 
As I said, none of the Startup Options work.
If you se... Read more

A:Stop error screen on startup.

System appears to be about 5 years old...I would replace the CMOS battery, as a start.
 
Did you try to run Dell Diagnostics?
 
The CMOS battery is a coin-sized small battery (CR2032 is the model/type) on the motherboard.
 
General Instructions , ignore the part about copying settings, that is unnecessary today.
 
After changing the battery, check the date/time in the BIOS and ensure that what is reflected is accurate.  Then hit F10 to save the changes, the system will reboot automatically.
 
Louis

Read other 77 answers
RELEVANCY SCORE 53.2

Every time I start my computer I get this error message. Everything works fine so I don't see that anything needs to be fixed. How can I stop the error message from popping UP?
 

A:Error message on startup - how do I stop it?

Read other 8 answers
RELEVANCY SCORE 53.2

Own a Dell Inspirion 1520 laptop running Windows XP service Pack 3 (using TrendMicro PC-cillin Internet Security Suite for firewall, anti-virus, etc.). This morning (and on subsequent startups) a blue screen stop error occured before loading Windows. It read "STOP: C0000145 {Application Error} The application failed to initialize properly (0xC0000005). Click on OK to terminate the application."

Except that an OK button was unavailable and the entire screen was blue. Had to hold power button down to turn off. Tried a few times to restart without error but it is hit or miss. No problems starting up in SAFE MODE w/ NETWORKING. Ran Driver Detective to update drivers and RegCure (which shut itself down every time I tried to fix the HREF errors). Have also ran my antivirus/malware scan with it finding nothingKaspersky found three items (see report after DDS.txt) that TrendMicro did not. I have since deleted the quarantined files and geleted the cached files in Java. I'll be running Kaspersky again tonight to be sure I am not missing anything.

Currently it is running it in a standard mode after several attempts at startup. I intend to keep this bugger running until I can figure this out. I have reset this computer to an earlier restore point hope this error does not reappear. I thank you for all your help and eagerly await a response. I'd rather not wipe the system...but am prepared to do so and have backed up everything. Again I thank you for assistance.

(The followin... Read more

A:Startup STOP error 0xC0000005

_____Temporarily solved_____

I know this is a double post and I apologize. the previous post was far too long to add my reply to.
Anyways. I did a system restore to 1JAN09 and did a full system scan for viruses, etc. Kaspersky found the same virus in the java folder, but could not provide any information on the virus. I googled it and found an obscure web forum refer to the virus as a Java temporary file cache virus. Their sugestion was to clean Java's temp files. To do this click on your start menu button. Click on Control Panel and click Classic view link on the left hand menu. Double click Java. In the General tab click delete temporary files...it will be on the bottom.
I redid the Kaspersky scan with no new viruses or malware found. From that point I cleared the quarantined files I had in PCcillin. I ran Driver detective and reg cure to verify that nothing was missing. Otherwise...all seems to be okay. If anyone comes across something I'm missing in those files I submitted above, please feel free to inform me as I am not as knowledgable about systems as some...I'm just not afraid to try things on my own...hee...hee...
Thanks.

Read other 7 answers
RELEVANCY SCORE 53.2

On changing some settings and rebooting I get BSOD with error message:
*** STOP: 0X00000050 (0X95A00000, 0X00000000, 0X81AE69FD, 0X00000002)
*** Ntfs.sys - Address 81AE69FD base at 81A0C000, Datestamo 4a5bbf45
I have tried using F8 and safe startup but gets to the Windows flying logo then bombs out to the Blue Screen again with the same error.
I've updated the bios with no change.
I'm on Windows 7 Ultimate

A:STOP 0X00000050 Error on Startup

Bug Check Code 0x50: http://msdn.microsoft.com/en-us/library/ff559023%28v=VS.85%29.aspx
Run chkdsk /r /f and check again.
Also, check your disk cables. If this does not help, it will be better to contact your manufacturer Technical Support.
 


This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft Certified
Professional
Microsoft Certified
Systems Administrator: Security
Microsoft Certified
Systems Engineer: Security
Microsoft Certified
Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows 7, Configuring
Microsoft Certified
IT Professional: Enterprise Administrator

Read other 2 answers
RELEVANCY SCORE 53.2

Just bought a used laptop. As soon as I seen that it turned on and got to the login screen and it stayed up for a minute or two, I assumed it worked (silly me).

Immediately after buying it I did a fresh install of XP. Now as soon as the Windows startup loading screen appears, it goes right to this message (which only lasts a split second):


"A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this stop error screen, restart your comp"


It doesn't even finish the message before it reboots into and endless loop. It will not start in safe mode or last known either.

The XP setup worked fine so I am assuming the hardware is fine. The HD was formatted and files copied to it, the charger gets the battery light when plugged in, the fan is throwing heat out the vent, etc. Also as I stated it got as far as the login screen and stayed there when I first inspected it.

The only known issue is when I tilt the screen it will get choppy while being moved. Anyone have any ideas?

A:Stop error at startup, even after XP reinstall

Hi luderdune,

Can you restart the machine and as it's starting tap F8 repeatedly to boot it into Safe Mode. You will then be presented with a few options. Scroll down with the up/down arrows and choose 'Disable automatic restart on system failure' and hit Enter. Windows will then reboot (don't tap F8 this time let it boot normally) This will allow you to see the BSoD (Blue Screen of Death) and either take a picture of it and attach it to the next post (very useful) or write down any relevant information it tells you (stop error 0x000000D1 etc which is usually at the bottom/middle area and anything under 'technical information' at the top.

You can also check to see that your hardware components are secure in their slots, especially look at RAM and you hard drive (you can locate these at the bottom of your laptop under their panels) Make sure you turn the laptop off and remove the battery, before entering it though.

You say that your screen gets choppy when tilted? This will point to an internal hard drive issue.

If you let me know the make and model of the laptop, I can try and see if I can find a user manual for it on line for you.

I would also suggest that you re-post your problem in the BSoD section here with the information that they will require

Read other 1 answers
RELEVANCY SCORE 53.2

Hey everyone, name's Silentwolf. Probably should have introduced myself in the appropriate thread, so, my apologies. While I'm doing the n00b thing, can anyone tell me how to put up my own avatar? It doesn't appear to be in the options.

That's out of the way.

This morning my Toshiba Satellite A60 Notebook computer was working fine, but a bubble popped up next to the clock informing me that a file (I don't remember the file, it was something in a system32 subfolder, with a .000 extension) was corrupt and that I should use Chkdsk to fix it. I have Windows XP Service Pack 2.

I set up Chkdsk to run when I restarted the computer and then did so.

Instead of running Chkdsk, my computer got three bars through loading Windows and blue screened with a stop error:

STOP: 0x00000024 (0x00190203, 0x81A734C0, 0xC0000102, 0x00000000)

From which point I could only turn off my laptop and turn it on again.

It gave me the usual options, safe mode, safe mode with networking, etc. and I tried each of them, each in turn resulting in the same stop error.

So I can't access Safe Mode or anything. I can hold F12 when starting the computer and choose to boot from HDD, CD/DVD or Network. The only CD/DVD I have came with the computer and results in a format and reinstallation of the preinstalled system software.

I have this computer, my PC, to ask for help and possibly make a boot CD - only I don't know how. Anyone help me out?

Much appreciated,
~Wolf.

A:Notebook Startup Stop Error

As far as troubleshooting goes, I'm not really sure what that stop error goes.

I do know that you should be able to boot off a Windows XP cd, select "install windows xp"

the next screen it should tell you that if already found a previous installation, at that point, you should be able to repair that installation...

that has worked for me. the problem I had was after choosing safemode/last known good configuration or normal startup, it would simply just restart without even showing a splash screen...

Read other 1 answers
RELEVANCY SCORE 53.2

Every time i try to acces the slideshow application in the photoshops elements i get an error warning. Closing Photoshop elements. Adobe Photoshop Elements has encountered a problem and needs to close. Error code C0000005 Address 60cbb311, or 60cbb2fi. Then the program terminates. I have tried repairing the program, uninstalled it and reinstalled it all with no effect. The address numbers change but that's it..otherwise the program seems to work. As long as i don't try to access the slideshow portion. I've also noticed that my Ms Picture it! Publishing Platinum is no longer working either. Tried scanning for virus's and the like, it comes up clean. I have an older pc and its running windows xp. I know that the slideshow part of the program did work at one time but i never really used it besides toying with it until lately..the photoshop program is an older one but i bought it outright, it had never been installed until i put it on my pc. Any ideas or help would be appreicated, thanks in advance.
 

Read other answers
RELEVANCY SCORE 53.2

I'm running Windows 7 Home, 64 bit
Laptop with i7 2.4 gHz and nVidia GeForce GT 630M, 1 GB memory, and 6 GB RAM.

Almost all games do not work on my computer. I've been trying to install a new game, and everything crashes instantly. The installers for each game also crash; some games I was able to install through a torrent or direct download client. However they all crash when I open them. For example, Raiderz, Tera, Dragons Nest, and C9 downloaders all crashed for me. C9 didn't work for me after I had installed it (instant crash with C0000005 error) and it didn't work through steam either (same error). They close instantly, before I am able to interact with the window. Pando Media Booster and Nexon Game Manager also crash with this same error.

I did manage to get Raiderz to work after I direct downloaded a set up and installed that. However, C9 still didn't even after I had installed it.

I've tried changing compatibility modes and running as administrator. I also updated my DirectX and my video card drivers.

Can anyone resolve this issue? Or direct me to a place where it has been solidly resolved? I've been researching this problem all day, to no avail.

Perhaps some games that do work may help: Dota 2 and League of Legends are games I've played recently that will work.
 

A:APPCRASH C0000005 error, almost every game

Read other 16 answers
RELEVANCY SCORE 53.2

Hello all, I'm new to the forums here as I can normally troubleshoot and problems myself, but I've been having a hard time resolving this issue.

I've recently upgraded my motherboard, processor and RAM to an ASUS Z87-K, Intel i5-4670K, and Corsair XMS3 1x8GB, and ever since I have been experiencing what appear to be video card related crashes. I am using a Zotac Geforce GTX 560 AMP, and a Corsair 750w PSU and did not have issues before the upgrade. The computer will crash to desktop while playing high performance games, sometimes almost immediately, sometimes after an hour or two. This results in an event log message like this:


Code:
-
System


-
Provider

[ Name]
Application Error




-
EventID
1000

[ Qualifiers]
0





Level
2





Task
100





Keywords
0x80000000000000




-
TimeCreated

[ SystemTime]
2014-06-18T19:01:27.000000000Z





EventRecordID
5565





Channel
Application





Computer
HomeCore





Security

-
EventData

Shogun2.exe

1.1.0.0

507716b8

nvwgf2um.dll

9.18.13.3788

537a8e25

c0000005

00290d6e

18c0

01cf8b1863dbf93b

C:\Valve\Steam\steamapps\common\Total War SHOGUN 2\Shogun2.exe

C:\WINDOWS\SYSTEM32\nvwgf2um.dll

f2ba8cef-f71a-11e3-8286-40167eb0e1dd





Code:
-
System


-
Provider

[ Name]
Application Error




-
EventID
1000

[ Qualifiers]
0





Level
2





Task
10... Read more

A:BSOD and CTD, error 119 and 133 , exception c0000005

Hi Krieger & Welcome To The Forums ^_^,

I have analyzed your dump files (one of them is corrupt), below has been provided an analysis of your dump files for informational purposes :-

Code:
**************************Thu Jun 19 03:29:33.384 2014 (UTC + 5:30)***************************** WARNING: Unable to verify timestamp for nvlddmkm.sys

*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys

Probably caused by : nvlddmkm.sys ( nvlddmkm+cbb76 )

BugCheck 119, {1, af87d, af89c, ffffe001fede8010}
BugCheck Info: VIDEO_SCHEDULER_INTERNAL_ERROR (119)

BUGCHECK_STR: 0x119

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: Shogun2.exe

FAILURE_BUCKET_ID: 0x119_1_DRIVER_REPORTED_INVALID_FENCE_ID_nvlddmkm+cbb76

MaxSpeed: 3400

CurrentSpeed: 3400

BIOS Version 1302

BIOS Release Date 05/29/2014

Manufacturer ASUS

Product Name All Series

??????????????????????????????????????????????????????????????????????????????????????``
**************************Wed Jun 18 02:02:04.650 2014 (UTC + 5:30)**************************
Probably caused by : GenuineIntel

BugCheck 124, {0, ffffe001b0ba9028, bf800000, 124}
BugCheck Info: WHEA_UNCORRECTABLE_ERROR (124)

BUGCHECK_STR: 0x124_GenuineIntel

PROCESS_NAME: Shogun2.exe

FAILURE_BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_CACHE

MaxSpeed: 3400

CurrentSpeed: 3400

BIOS Version 1103

BIO... Read more

Read other 14 answers
RELEVANCY SCORE 53.2

I know this sub-forum is normally used for BSOD issues, but I'm not sure if this issue fits in the other sub-forums any better than this one.

For at least a month now, various programs have been crashing with error code c0000005, and I'm not sure how to fix the issue.

I've already run Memtest86 a few times, and I received no errors from the tests I ran.

I've uploaded the latest minidump crash from a program called MusicBee (I no longer have the other minidumps), along with the rest of the files produced from DM Log Collector Tool (HOME-Fri_07_22_2016__12235_99.zip).

Read other answers
RELEVANCY SCORE 52.4

Hi, i have a problem with my dell laptop running vista. Basically whenever i start it up windows asks me if i want to start it running normally or repair mode. Whenever i select either of these options i allways end up getting a blue screen with the error message

STOP: 0X000000F4 (0X00000003,0X84BA04D0,0X84BA061C,0X81290330)

Ive been told maybe its a hardware issue?

I have actually been searching around on the net and found that you can burn your own recovery disk for vista and boot it from startup and do a system restore ect. Here is a guide for doing the system restore,

http://www.bleepingcomputer.com/tutorials/tutorial142.html

Now ive got up to part 4 but cant get any further because it says i need to load drivers so i click that and then it says 'insert the installation media for the device and click ok to select the driver', i click ok and then it opens up a box with computer, system files ect and it wants me to find a file with setup information. Now i dont know which file of where the file is on the computer i should select, but when i select a file and its the wrong one it says 'the specified location does not contain information about your hardware', so which file should i be selecting? Also i couldnt find out if this version of vista is the 32 or 64 bit, its not on any stickers and obviously i cant get into the computer to find out, could i find out through bios or something? The disk for the recovery is the 32 bit version but i dont know if the... Read more

A:STOP: 0X000000F4 error on startup with vista

Hi -

Please follow these instructions --> http://www.techsupportforum.com/1871981-post2.html

Attach the resulting zipped file(s) to your next post.

Regards. . .

jcgriff2

`

`

EDIT:

The bugcheck posted = 0xf4 (0x3,,,) = A process critical to the operation of Windows was suddenly & unexpectedly terminated.

Hardware can always be the underlying cause of almost any BSOD. It may be bad RAM, HDD, PSU, etc... that caused this.

However, it could very well be caused by a software update - be it Windows Update or an update to a driver or an installed program that now finds itself in the middle of a fight - usually for a memory address or mem add region that another driver claims for itself or that Windows has declared "off limits" for the protection of the OS. In other words - a 3rd party driver not playing by the rules of the Windows Kernel.

Give us a little time and we'll provide our analysis & conclusions.

JC

.
.

Read other 12 answers
RELEVANCY SCORE 52.4

Hi everyone,

Firstly, I apologize for missing anything here as I am new to the forum. I would really appreciate any help as this has been very frustrating. I have spent the entire evening attempting to fix my girlfriend's laptop. It is a Dell Inspiron 1525 running Windows Vista.

My initial problem was dealing with what I am fairly sure was a virus that redirected all search engine links to other sites. Unfortunately, this also had the effect of closing any anti virus programs I attempted to run such as Spybot Search and Destroy and avast! that I have running on her computer.

I finally attempted to run Panda Active Scan as this runs through a browser. While running this, the computer unexpectedly shut down. When restarting, I now get a blue screen and the error message STOP: c000021a everytime. I cannot start in safe mode or use any of the other startup options.

Not sure if this means anything but I ran the system diagnostics and got the following errors when running a scan on the system memory:

Error Code: 0142
Message: Error Code 2000-0142
Hard Drive1 - Self Test Unsuccessful
Status: 79

At this point, I realize from reading other threads that I will most likely need to reformat the hard drive. However, if possible I would really like to recover some of the hard drive files. Is this possible through any kind of command prompt and backup utility or will I need to have someone else do this for me?

I know that usually you would require logs and other information from... Read more

A:Startup Error Code: STOP: c000021a

Read other 8 answers
RELEVANCY SCORE 52.4

I recently built my computer a few days previous. I had it setup fine and running. I was able to play games such as CSGO, GTAV, Arma 3, and DayZ with no problems. Everything was working until this morning, I had shut down last night and it had to update when I shut down. When I turned on my computer this morning I was met by the blue screen with the error. I am currently only able to run in safe mode. I have already tried to do a restore but it had no effect.

I have attached the dump file below. I have not tried to run any memory or cpu tests yet.

Thanks for any help.

A:BSOD on startup Stop error 0x00000124

There is no crash dump in the zip. So we cannot check it in search of a probable cause.

You are running in safe mode, and normal mode causes the BSOD. That means some device driver which are inactive by virtue of the safe mode is causing the issue. There are apparently two primary suspects which devices are stopped now in Safe mode, despite of being ordered to auto-start with windows:
NVIDIA GeForce GTX 970
USB Audio Class 1.0 and 2.0 DAC Device
First remove the USB audio thing. Try to Boot into normal mode. Does it work?

If not, remove the nvidia card, apply the display port to the Motherbord's port to activate the Intel HD 4600 graphics. Then try to boot back in normal mode. Does it work? Let us know.

Also, free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.

Read other 1 answers
RELEVANCY SCORE 52.4

I am getting a windows stop error (details below) just after the login screen on XP. It appears to have made it to the loading startup programs stage and then the blue screen. I can boot in to SAFE mode successfully and ran Norton from there but am stumped about the stop error.

I am pretty sure the machine is virus and spyware free (according to Norton, Ewido, Spybot and Adaware) so I don't think that is the problem but, of course, I could be completely wrong. :) I have adequate free disk space (25GB Free on 40GB Drive), I don't know if I have a driver that is causing the conflict and don't seem to have a caching and/or shadowing option in the BIOS. The stop error follows along with a HiJack this log. Thanks for any help you can provide!

Joe

STOP: 0x0000008E (0xC0000005, 0x8055D07C, 0xF7EE7984, 0x00000000)

HiJack This...

Logfile of HijackThis v1.99.1
Scan saved at 4:31:04 PM, on 11/28/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\savedump.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Hijackthis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dell.com
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http... Read more

A:Windows Stop Error in Normal Startup

8E error is likely to be a corrupt nvidia driver

Read other 10 answers
RELEVANCY SCORE 52.4

Error -STOP: 0x0000007B upon startup of ASUS Q550LF laptop. Unable to boot--keep getting error. Have tried Startup Repair with Windows 7 bootable flash drive-which did not fix problem.

I had this hard drive in a Lenovo working just fine, so I got some software and uninstalled most of the drivers since I was moving THAT hard drive (with operating system on it) over to an ASUS Q550LF laptop. I did not want Lenovo drivers on the ASUS. So I installed the hard drive in the Asus and it started up a few times and then I started getting the error. Any idea how to fix the issue?

A:Bluescreen Error STOP: 0x0000007B on startup

Stop ox7B is INACCESSIBLE_BOOT_DEVICE. That means the system cannot get access to the disc to boot from. The usual causes areThe Hard drive itself
Improper boot sequence
Boot virus, bootkit.
What you need to do are .... ► Test the HDD using Seatools for DOS.

► Scan the system for possible virus infection with Windows Defender Offline

► Do you have access to another computer right now? If so, download Partition wizard Bootable CD (the last one in the link). Burn it in a blank CD or in a USB flash stick.

Boot into Partition Wizards GUI following this instructions. When you are on the last screen, take a camera snap of the screen and upload the snap here.
Screenshots and Files - Upload and Post in Seven Forums

We need to see the partitions and parameters.
Let us know the results.

** If you dont want to take all those hassles, you may opt for a Clean Renstall.

Read other 1 answers
RELEVANCY SCORE 52.4

NeighborI tried to add a Skype account recently.  Now internet explorer will not connect to his isp so that he can retrieve his email...apparently something went astray in his registry.  I do not know whether the addition of the Skype account caused this or what.  Trying to help.  Tried CCcleaner with no result.  Ran Malwarebytes.  Anyone else had this problem?

A:internet explorer will not connect to my isp Error c0000005

This sounds most unusual, a lot of problems which might not be related or might have happened at the same time by coincidence. Has a browser other than IE been tried? Have other computers attempted to connect along the same connection?
Skype is simply a video over internet protocol VOIP program, it might increase your bandwidth use quite a bit but shouldn't cause any other issues with general connectivity.

Read other 2 answers
RELEVANCY SCORE 52.4

hey! i am new to eightforums. i am getting appcrash due to exception code c0000005 when i open GTAV.exe or GTAIV.exe.
i have uploaded error messages screenshots and dump files.
tell me what more info should i provide.
i earlier used to play GTAIV.exe on this same computer (model hp pavillion 15 e016tx).
please help me out.

A:error c0000005 opening GTAV.exe and GTAIV.exe

please help!

Read other 4 answers
RELEVANCY SCORE 52.4

I've been getting this error for a couple of months, over 20 times in all. The two common situations in which it usually happens are:
1) Browsing in Chrome, particularly when there are many windows and tabs open.
2) While computer is idle.
Except for the very first time this happened, it points to file aswSnx.sys, address FFFFF8800????AD1, where the ???? can vary

I attach the SFdebug file.

Haakon

A:BSOD with several Chrome windows, error 3B (C0000005, ...

All of the crashes I saw point to Avast as the culprit. Looking at the module in particular, it's up to date, but it's still the cause nonetheless.

fffff880`03e87000 fffff880`03f88000 aswSnx
Loaded symbol image file: aswSnx.sys
Image path: \??\C:\Windows\system32\drivers\aswSnx.sys
Image name: aswSnx.sys
Timestamp: Tue Jan 21 11:11:09 2014 (52DEAA2D)
CheckSum: 000FECA1
ImageSize: 00101000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Personally, I wouldn't use Avast. If you have to run antivirus (I don't run any) then use something that has hundreds of millions of engineering dollars behind it. Such as McAfee or Symantec. I know these comments will likely get me a lot of heat, but they're just my opinion.

If you want to post links to some full memory dumps I'd be happy to look further to see if another driver might be stepping on top of the Avast driver. As it is right now, some action in user mode invokes a call to aswSnx.sys (likely through services.exe) which results in an unrecoverable exception.

It's this instruction here that causes the bugcheck:

aswSnx+0x2cad1:
fffff880`040f7ad1 f30f6f01 movdqu xmm0,xmmword ptr [rcx] ds:00000000`17de0000=????????????????????????????????

Unfortunately the code referenced is paged out.

Read other 9 answers
RELEVANCY SCORE 52

I keep getting this error message at startup. I can't figure out how to get it to stop coming up. It doesn't appear I have to fix anything since everything's working fine. Where do I go to get this error message to go away?
 

A:Solved: Error message at startup - how do I get it to stop coming up?

Read other 8 answers
RELEVANCY SCORE 52

Hello: My computer was infected by variant kazy malware/virus which was removed by radialpoint security system and then few files by malwarebytes'anti malware.But the new problem arised when i start up the window,desktop doesn't load and tons of error messages pops up,all related to c:\dococument and setting\all users \application data \...........exe didn't found or c:\local service \........ exe or c:\win\xpsp2\system32\........exe etc etc.I keep on ok and new name arises.All those names are fake. When i start task manager by pressing ctrl+alt+delete and terminate explorer.exe all pop up stops then after getting back the explorer.exe desktop arises and the computer works normal.I run radianpoint security services realtime anti virus supplied by my ip provider and also malwarebytes anti malware software but it didn't find no more threats.I run malwarebytes in safemode with networking too but made no difference. So I downloaded combofix and it found the rootkit is infected. Combofix didn' fix the infected rootkit but posted a log of catchme about hidden files etc on my desktop.I think you can help me to fix the problem.But i can't post the log here as per the announcement by the admin.So please help me and advise me what should i do ?ThanksEdit: Moved topic from XP to the more appropriate forum. ~ Animal

A:At startup error messages stop loading desktop

Its not unusual to receive such an error after using specialized fix tools.A "Cannot find...", "Could not run...", "Error loading... or "specific module could not be found" message is usually related to malware that was set to run at startup but has been deleted. Windows is trying to load this file but cannot locate it since the file was mostly likely removed during an anti-virus or anti-malware scan. However, an associated orphaned registry entry remains and is telling Windows to load the file when you boot up. Since the file no longer exists, Windows will display an error message. You need to remove this registry entry so Windows stops searching for the file when it loads. To resolve this, download Autoruns, search for the related entry and then delete it.Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there. (click here if you're not sure how to do this.)Open the folder and double-click on autoruns.exe to launch it.Please be patient as it scans and populates the entries.When done scanning, it will say Ready at the bottom.Scroll through the list and look for a startup entry related to the file(s) in the error message.Right-click on the entry and choose delete.Reboot your computer and see if the startup error returns.[i]Credit to quietman7[/iHaving run ComboFix we need to see that and a DDS log.Please go here....Preparation Guide ,do steps 6 - 9.Create a DDS log and post it in the n... Read more

Read other 7 answers
RELEVANCY SCORE 52

Specs
- Samsung N150 Plus (1GB RAM, Intel Atom processor)
- Windows 7 Starter x86 OEM (Original OS)
- Age - Just over a year old and no OS re-installation
More specs - Support for NP-N150P

Hi,

I have my friends net-book and all of a sudden it generated a error where it had to be restarted and every-time I switch it on it says that windows failed to start and comes up with options of startup repair or start windows normally if i click start-up repair it just comes up with the windows 7 screen and a pointer, i can move the pointer around but it will not do anything else, also if i press start windows normally it flashes with a blue screen and restarts itself and goes back to the start-up repair option, i had disabled automatic restart on system failure and got this information from the BSOD:

UMOUNTABLE_BOOT_VOLUME

Technical Information: *** STOP: 0x000000ED (0x84E77E20, 0x0C0000185, 0x00000000, 0x00000000)

I have tried all the options on F8 advanced options, have tried to use windows 7 repair disk but external CD drive (which works) will not be recognized in the boot menu and the inbuilt recovery will not work and if i use the repair your computer option it just comes up with the windows 7 screen and a pointer, i can move the pointer around but it will not do anything else. I have also tried the Samsung Recovery Solution 4 (F4 on boot up) but it just comes up with the logo and the pointer and does nothing after that. And also I do not want to do anything physical to the ... Read more

A:BSOD during Windows 7 startup error *** STOP 0x000000ED

Why are you against taking out the hard drive? Is it difficult to get to?

The hard drive is typically within a panel that is easy to remove with a screwdriver. I honestly wonder if the hard drive is not connected properly to the system... If you decide to check, here are the steps to follow:The first thing to check is whether the hard disk is physically connected to the motherboard properly. To do so:Shut down and turn off the computer
Remove the AC Adapter
Remove the battery
Hold down the power button for 15-30 seconds to close the circuit and drain any residual power
Remove the panel on the underside of the laptop where the hard disk is housed
Remove and re-insert the hard disk by sliding it away from the connector and then gently but firmly pressing it back into the connector (no screws should need to be removed to do this step)
Replace the panel on the underside of the laptop to cover the hard disk
Replace the battery
Replace the AC Adapter
Turn on the computer and see how it responds
Post back once these steps have been implemented whether the system is stable. Sometimes these crashes can occur due to a loose connection.
STOP 0x000000ED: UNMOUNTABLE_BOOT_VOLUME from usasma provides this information about the BugCheck:






  
Quote: Originally Posted by usasma


Usual causes: Hard drive problem, File system problem, Improper boot parameters



A couple other things to try:Reset the hardware/software connections f... Read more

Read other 3 answers
RELEVANCY SCORE 52

Hi,
I have got a serious problem running our web app in some machines.. machines installed IE 6 crahsed viewing particular page(even before page is started loading). But this works fine on all the machines installed IE 7 & IE 8.

I have created the crash dumb using the dr watson utility.. it logs the following error msg.
seems there is access violation happened in mshtml.dll.. but i dont know whether this is happened because of our page or some other thing.. can someone help me out to resplve this one..

if u go through the stack trace below, u could see this line

FAULT ->7dcb1227 f3a6 rep cmpsb ds:044ae560=00 es:00000000=??

this is where exactly the error happened.. but i dont know how to use this line to identify the actual problem... :(

Application exception occurred:
App: C:\Program Files\Internet Explorer\iexplore.exe (pid=3780)
When: 8/12/2009 @ 10:53:34.796
Exception number: c0000005 (access violation)



*----> State Dump for Thread Id 0x8ec <----*

eax=00000000 ebx=00000000 ecx=000000bc edx=044ae560 esi=044ae560 edi=00000000
eip=7dcb1227 esp=044ae1b8 ebp=044ae1c4 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246

function: mshtml
7dcb1213 ec in al,dx
7dcb1214 53 push ebx
7dcb1215 8b5d08 ... Read more

Read other answers
RELEVANCY SCORE 52

Hi, well there is an error (0*c0000005) which pops up every time i try to install a new app and also pop up on regular basis for a antivirus program i use. so i go through sfc scan to deal with this. sfc scan shows the
following result :  "windows resource protection found corrupt files but was unable to fix some of them."
so i go to the SFC details to check the corrupted files and i found multiple files which says:
1) cannot repair member file
2) could not reproject corrupted files
On the end of both these lines following text was written: "Hash mismatch"
what should i do now?
Somebody help please!

Read other answers
RELEVANCY SCORE 52

I,ve read alot of old strings about getting error code: c0000005 Address: 60cbb2f1 when starting a slide show but there never seems to be a fix. I,ve done everything but reload the program but it looks like others who have reloaded still have the error. Is ther a fix out there?
 

Read other answers
RELEVANCY SCORE 51.2

I am receiving the STOP Error 0x00000124 on a Lenovo Thinkcentre M93P M10A90016US 2 month old PC running MS Windows 7 64-bit Pro with 8 Gig RAM and 500 Gig HDD and can't figure out what's causing it. System was just restored to factory new condition so no new software has been installed. ZIP file attached.

Thanks in advance for your help!
Dino

A:Unrecoverable Hardware Error STOP 0x00000124 upon Windows 7 startup

  
Quote: Originally Posted by gsssman


I am receiving the STOP Error 0x00000124 on a Lenovo Thinkcentre M93P M10A90016US 2 month old PC running MS Windows 7 64-bit Pro with 8 Gig RAM and 500 Gig HDD and can't figure out what's causing it. System was just restored to factory new condition so no new software has been installed. ZIP file attached.

Thanks in advance for your help!
Dino


RMA it.

Stop 0x124 is a hardware issue in general, and some hardware tests will void the warranty. As it is brand new as you are saying, better you use the warranty.

Read other 1 answers
RELEVANCY SCORE 51.2

Hey everyone, I have a bit of a complicated problem today, so bear with me .

So several days ago my friend bestowed upon me some old desktop rig that had been collecting dust in his room for a while. It seems to have the internals of a Dell Inspiron 531, except with 4GB of RAM and a different video card (having trouble determining). After I turned it on, I discovered the CMOS battery was dead, so I quickly replaced it.

There was no hard drive when I got it so I hooked up a Western Digital Scorpio Blue 640GB (WD6400BPVT) with Windows 7 on it to get things going. Things were going fine until I booted the computer, now at the Windows 7 logo animation, within the first few frames (where the red and green tiles first appear as small dots), I get this error:

[B}
*** STOP: 0x0000007B (0xFFFFF880009A9928, 0xFFFFFFFFC0000034, 0X0000000000000000, 0x0000000000000000(
[/B]

I've tested the hard drive on another computer, and it boots normally. Is there something i'm missing? The hard drive seems to be hooked up correctly (SATA and power cables both fit normally, recognized in BIOS). I've tried just about every advanced boot option (Safe Mode, Repair my computer, etc), and all BSOD before they can even finish loading.

Any help at all is greatly appreciated, I've been trying to solve this for a couple days now, and Google has gotten me nowhere.

A:BSOD on Windows 7 Startup Animation, error STOP: 0x0000007B

Well, it sounds like an Incompatible hardware problem. It sounds like the HDD is incompatible with the PC. For the reason being is that you are getting a bugcheck of 0x7b which indicted an inaccessible boot device.

When you boot the HDD on the other computer does windows boot perfectly fine?

Read other 4 answers
RELEVANCY SCORE 51.2

A few days ago, my father used this computer for reasons I see no exact reasoning to allow. Since then, this computer has been unable to run outside of Safe Mode. Upon reaching the Windows XP Logo, it would instantly restart. I have disabled Automatic Restarting and receive a blue screen mentioning this STOP error:


Code:
***STOP: 0x0000007E (0xC0000005, 0xF782E9B9, 0xF8BF5538, 0xF8BF5234)
I do not know what he did, nor would he know or remember anyway. It is my believe this is caused by a viral infection of the computer due to his arrogance of safe internet usage procedures, but individual scans of the HDDs prove nearly useless. I have found posts of similar errors requiring checks and such I am unacquainted with, but I am hoping help could be provided. This computer is an eMachines T2958, purchased around 5 years ago.

I have lost track of what more information you'll need, besides exact specs (which I'll need to find, then). So inquire where needed. I am only hoping that restores or formats are not required. I had a minor bad experience a few years back where my sister did a system restore without my consent and I had lost a large majority of code I had written for a game.

Edit: I've added the computer specs I obtained from PC Wizard 2008 in 2007 to my profile. The only change since then is finally moving to Windows XP Service Pack 3 after finding the erroneous registry by one of my programs preventing the upgrade. The hardware is the same. Not everyt... Read more

A:Receiving blue screen stop error on normal XP SP3 startup

0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
A system thread generated an exception which the error handler did not catch. There are numerous individual causes for this problem, including hardware incompatibility, a faulty device driver or system service, or some software issues.

Generally when one can only access through Safe Mode the issue is due to drivers.

If you can access through Safe Mode check Event Viewer (EventVwr.msc) for additional information such as Yellow Triangles and RedXs and note what they flag.

Due to the fact that you are suspicious of viral infection go to our Virus and Malware Removal forum and read the UPDATED 8 Step sticky and if you can follow the steps as given.

Then on that forum post there with the the required logs attached. You'll get excellent help.
 

Read other 3 answers
RELEVANCY SCORE 51.2

Hi,

I was recently playing the Battlefront beta after installing new AMD drivers when a bsod occurred. Booting into Windows after this point has resulted in the following bsod. Unfortunately I'm unable to provide dump files as Windows is not accessible in any configuration.






Quote:
STOP: c000021a {Fatal System Error}
The initial session process or system process terminated unexpectedly with a status of 0x000000012f 0x000108e0)
The system has been shut down.


Note:
Due to this issue I'm unable to reach Safe Mode in any configuration.
I've also ran sfc /scannow which detected now issues
I've also tried bootrec.exe /FixMbr and /Fixboot which were succesful but did not resolve the issue.

I've ran Startup Repair several times and received this message





Quote:
If you have recently attached a device to this computer, such as a camera or portable music player, remove it and restart your computer. If you continue to see this message, contact your system administrator or computer manufacturer for assistance.


Short of formatting I'm running out of things to try to be honest, if anyone has any more insight on this I would be very grateful.

Thanks,
Tom

Read other answers
RELEVANCY SCORE 51.2

Hi guys.

My girlfriends laptop has a habit of pulling an occasional (seemingly random) BSOD on start-up. As far as either of us can remember it's the same error code every time.
Having had good advice from the forum previously I thought the best thing to do was ask here (before killing-it-while-attempting-to-fix-it).
Hopefully the files requested in the How/What to Post instructions will be attached to this post.
Thanks in advance for any help or advice available.

Cheers, Scruff

A:Packard Bell laptop 0x0000004F STOP error on startup

McAfee is a frequent cause of blue screens, please remove it.

Replace with Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Microsoft Security Essentials - Microsoft Windows

Malwarebytes Free Do not start the trial version of MalwareBytes

You may also take a look at:Good & Free System Security CombinationMake scans with - TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US

Online Virus Scanner EsetPlease take a back up of the hard drive asap - (on an external device / HDD)

Reduce items at start up:Performing a Clean Startup in Windows 7

Add, or Remove Startup Programs in Windows 7
Your Antivirus software is basically whats just needed there.

Use the System File Checker tool and Run Disk Check: Repair Windows 7 System Files with System File Checker

Run Disk Check in Windows 7 for Bad Sectors & ErrorsUpload a screenshot using:CrystalDiskInfo For how to upload a screenshot or file, read here

Test your Hard Drive by running:Hard Drive Diagnostic ProcedureMonitor hardware temperature with system monitoring software like Speccy or HWMonitor:
Piriform - Speccy

CPUID - HWMonitor For how to upload a screenshot or file, read here


Code:
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Tue Jul 30 02:21:50.059 2013 (UTC + 6:00)
System Uptime: 0 days 0:00:22.495
BugCheck F4, {3, fffff... Read more

Read other 1 answers
RELEVANCY SCORE 51.2

Laptop:
Dell Latitude D600 Intel(R) Pentium(R) M processor 1600MH 589MHz
512MB of Ram
Windows XP Pro ver. 2002 Service Pack 2
Fujitsu MHV2060AH Disk Drive
HL-DT-ST RW/DVD GCC-4241N DVD/CD-ROM drives

My Problem:

On startup gives me blue screen saying:

A problem has been detected and Windows has been shut down to prevent damage to your computer... stop: 0x000000tE (0xC0000005, 0x00000040, 0xEC4D0C7C, 0xEC4D0978)...

It just started back up normally after I was running a diagnostics test for blue screen. I quit the test early b/c it was taking too long and everything worked fine, I would just get an error report saying "windows recovered from a serious error" I sent in the error report a few times, but it keeps coming up... this is a work computer and I don't want it to start giving me the blue screen again when we really need to use it...thanks for any help!
 

A:Windows XP Pro Blue Screen: Stop Error 0x000000tE on Startup

Welcome to TS - just fashionably late. And perhaps you have already solve the problem. If not, then consider Crashes/Reboots in "Guides & Solved Issues".

The events logs sometimes hold clues to problems being experienced with the computer. New software and new hardware often introduce compatability problems that lead to the feared BSOD.

If the general troubleshooting does not lead to a solution, then minidumps associated with the errorcodes displayed as BSOD can be considered. Several contributors still have the knack to decode the minidumps.
 

Read other 2 answers
RELEVANCY SCORE 51.2

Hello there!

For some times my computer has been shutting down after being on for more than 24h by the screens just going dark or something similar, this is probably due to a memory leak but I'm not sure. Now yesterday I got a BSOD instead which read something like "nvlddmkm.sys error".

I've been spending my whole day trying to fix this in safe mode (which works without any kinks). The first thing I tried was rolling back drivers, then updating to the latest and lots of driver related things, I still haven't fixed it but I decided to see if I could turn my computer on in normal mode with my GC disabled via device manager, now instead of crashing at the Windows screen, I now crash after the Welcome screen and I get a BSOD that reads IRQL_NOT_LESS_OR_EQUAL with 0x0000000A as the stop error code.

Now what I wonder is if there's any chance to save my GC or is it completely toast? And if I decided to get a new one, will that even fix it? Since I still get BSODs without my GC turned on in the device manager.

Read other answers
RELEVANCY SCORE 51.2

Problem signature:
Problem Event Name: APPCRASH
Application Name: 512.exe
Application Version: 0.0.0.0
Application Timestamp: 4a454248
Fault Module Name: 512.exe
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4a454248
Exception Code: c0000005
Exception Offset: 000090ca
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 395a
Additional Information 2: 34935062d2f93efbc8762fc5d84c8e56
Additional Information 3: 3bb1
Additional Information 4: 0a99a957ee6823fe31c7262f0df94ff8

Read our privacy statement:
Microsoft Online Crash Analysis


Problem signature:
Problem Event Name: APPCRASH
Application Name: Explorer.EXE
Application Version: 6.0.6001.18164
Application Timestamp: 4907e242
Fault Module Name: kernel32.dll
Fault Module Version: 6.0.6001.18215
Fault Module Timestamp: 49953395
Exception Code: c0000096
Exception Offset: 000c91e5
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160

Read our privacy statement:
Microsoft Online Crash Analysis

Problem signature:
Problem Event Name: APPCRASH
Application Name: Explorer.EXE
Application Version: 6.0.6001.18164
Application Timestamp: 4907e242
Fault Module... Read more

A:APPCRASH c0000005฿c0000096 please help! my Vista error all days , how to fix it?

EDIT

I changed this post because I didn't notice






Application Name: 512.exe



This is trojan.You have to remove it!Use this tool http://malwarebytes.org/

Read other 5 answers
RELEVANCY SCORE 51.2

I have been getting the BSOD with the following error code:

Event Name: BlueScreen
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Stop Description:
BCCode: 1000007e
BCP1: 0XC0000005
BCP2: 0X8DD80C67
BCP3: 0X805997CC
BCP4: 0X805994C8

Minidumps attached.
 

A:BSOD Vista: Error code 1000007e, parameter1 c0000005...

Hi, all of your minidumps point to ntkrpamp.exe which is a Windows file. Crashes in that file are usually from faulty memory. Download Mem test from the downloads section and let it run overnight. If you find errors remove one memory module at a time and run the test again to determine which module is faulty.

Also read this...... If you didn't already.
 

Read other 9 answers
RELEVANCY SCORE 51.2

Hi all,

One of our users is on a Vista PC on our work domain. He has a Sharp MX-2700N (Colour Network printer/copier/scanner) multi-function added, which defaults to B&W prints. When he opens up word, and goes to print properties to change to colour printing, word crashes and we get the following error codes shown in the attached jpeg images...

...our IT team is a bit baffled, does anyone have any ideas or experienced a similar or same problem?

Any help much appreciated as we only have 3 Vista PC's out of a domain network of over 500 PCs!

Cheers.

Ian
 

A:Solved: C0000005 error in Word when changing printer settings

Read other 6 answers
RELEVANCY SCORE 50.4

Yesterday, our computer around 6PM got a fake antivirus virus that popped up and installed automatically. I went and removed it off my computer. That one was called "Malware Doctor". Later, about 2 hours later, I got another one that popped up on my task bar called "Antivirus 2010". That one didnt install and I removed it. Today i started up our computer, and I got Antivirus 2010 again. I exited out of it, and removed it. Then I could not access the internet via Google Chrome, so i tried AOL. AOL worked, but it was freezing as always. I decided to restart my modem and my computer.

When I turned it on, It would go past the XP screen and continuously reboot. I then hit F8 many times, and got the menu(not sure what its called) and make it so it would not auto-reboot on system failure. I then got this error on a blue screen when i booted and had it set to not auto-reboot:

Quote:
c000021a {Fatal System Error}
The Windows logon process system process terminated unexpectedly with a status o
f 0xc0000022 (0x00000000, 0x0000000)
The system has been shut down.
I do not have a XP installation disc, or any other windows recovery discs. Booting into safe mode doesnt work, or the other start options. I am using Ubuntu 10.04 LTS to access the internet. How may I go about fixing this?

A:[SOLVED] 'Stop: c000021a {Fatal System Error} - Status 0xc0000022'; on Startup

Hi Buckeye80

Here's a blurb from aumha.org, Jim Eshelman's "Windows Support Center" website:

Stop 0xc000021a:

Quote:




This occurs when Windows switches into kernel mode and a user-mode subsystem, such as Winlogon or the Client Server Runtime Subsystem (CSRSS), is compromised. Security can no longer be guaranteed. Because Win XP can?t run without Winlogon or CSRSS, this is one of the few situations where the failure of a user-mode service can cause the system to stop responding. This Stop message also can occur as a result of malware infestation or when the computer is restarted after a system administrator has modified permissions so that the SYSTEM account no longer has adequate permissions to access system files and folders.




For your system, it's Winlogon that can't clear the hurdle.
__________

Usually, clearing this up would take two steps:
1) Clean-booting with a CD/DVD-based operating system and performing malware removal.
2) Performing a Repair installation of Windows XP (& afterwards updating Windows and antimalware software).
__________

Why not use the AVG bootable CD to clean up the malware. It boots a lean Linux & allows AVG to update it definitions. You can then scan your partitions for malware & delete what you can. http://www.avg.com/us-en/avg-rescue-cd

If your make/model came with an operating system disk, you might be able to order one from their support website. The price is ... Read more

Read other 19 answers
RELEVANCY SCORE 49.2

error comes up on XP

Error Signature BCCode: 1000007e BCP1:C0000005 BCP2: F7850FAE BCP3:

F7C577BC BCP4: F7574B8 OSVer: 5_1_2600 sp:2_0 Product 256_1

ALSO has a trap error (black screen)

TRAP C0000005 ----- Exception
tr:FFFF cr0=00000000 cr2=000039000 cr3=00000060
gdt limit=03FF base=0003F000 idt limit=07FF base=0003F400

CS:eip=0006:00000000 ss:esp=0030:00000018 errcode=0000
flags=00000000 NoCy NoZr IntDis Down TrapDis
eax=00000000 ebx=00000000 ecx=0000000C edx=00000005 ds=0000

es=0000
edi=00000000 esi=00060B00 ebp=00060AE8 cr0=00000000 fs=0060

gs=0060
 

A:Error Signature BCCode: 1000007e BCP1:C0000005 BCP2: F7850FAE BCP3: F7C577BC BCP4:

check this

http://www.pcmmc.com/error-bccode-1000007e.php
 

Read other 1 answers
RELEVANCY SCORE 46.8

Yesterday, our computer around 6PM got a fake antivirus virus that popped up and installed automatically. I went and removed it off my computer. That one was called "Malware Doctor". Later, about 2 hours later, I got another one that popped up on my task bar called "Antivirus 2010". That one didnt install and I removed it. Today i started up our computer, and I got Antivirus 2010 again. I exited out of it, and removed it. Then I could not access the internet via Google Chrome, so i tried AOL. AOL worked, but it was freezing as always. I decided to restart my modem and my computer.

When I turned it on, It would go past the XP screen and continuously reboot. I then hit F8 many times, and got the menu(not sure what its called) and make it so it would not auto-reboot on system failure. Booting into safe mode doesnt work, or the other start options. I am using Ubuntu 10.04 LTS to access the internet/techguy.

I then got this error on a blue screen:

c000021a {Fatal System Error}
The Windows logon process system process terminated unexpectedly with a status o
f 0xc0000022 (0x00000000, 0x0000000)
The system has been shut down. Click to expand...

I do not have a XP installation disc, or any other windows recovery discs. How may I go about fixing this?

Thanks! You guys are awesome, you helped me tremendously when I had my last virus/PC problem.
 

A:"Stop: c000021a {Fatal System Error}" on Startup

Read other 8 answers
RELEVANCY SCORE 46.8

Sometimes I am not sure whether or not I want a program to run at startup and I want to be able to change what I have done at any time.

So there are a number of unchecked entries in msconfig and I have to use Selective Startup all the time.

If I want to revert to Normal Startup under the General tab instead of Selective Startup, the program's box automatically rechecks itself in Startup.

The Startup tab gives me a handy record of what I did and allows for an easy change of mind so long as I continue to use Selective Startup.

As far as I know, If I edit the Registry to stop programs running at startup, they won't show in msconfig and I lose the handy record of how it was and I may have to reinstall the program to go back to it running at startup.

I would like to accomplish this:

1. Use Normal Startup instead of Selective Startup.

2. Have some programs not run at startup, but be able to easily change back to having them run at startup.

3. Have a readily accessible list of those programs and the details as shown under the Startup tab as a reminder of how it was without having to manually enter it all into a text file or keep a notebook or reinstall.

Is there some way to use Normal Startup, stop programs running at startup, but retain or find a list of those programs (including the details under the headings Startup Item, Command, Location) that is shown when using Selective Startup with unchecked boxes under the Startup tab?

To put it another way, use Normal... Read more

A:Solved: msconfig Normal Startup, stop running at startup, and change back

Read other 9 answers