Over 1 million tech questions and answers.

Custom Built Computer. Need Help!

Q: Custom Built Computer. Need Help!

Okay I have a costum built pc, I built it about 2 years ago. I'm currently running Windows Vista 32 bit. The other day I went to go turn it on and the motherboard instead of giving me the normal 1 beep, it gave me 1 long and 3 short. It goes to start up and then the screen goes black, it shows me my cursor but still the screen stays black. I have an Asus M2R32-MVP motherboard. I looked up the beep codes and it told me " no video card or bad Ram." Well I switched the ram and changed the video card and I no longer get the beeps but the screen goes black after Windows start up. I used my old hard drive to see if that was the case, same problem. I was wondering if anyone could possible help me out, I would greatly appreciate it!

Specs:
Asus M2R32-MVP Mobo
AMD Athlon x2 Dual Core +6000 Processor
750Watt Power Supply
Nvidia 8800 GT Video Card
1 TB Hard Drive
Windows Vista 32 bit

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Custom Built Computer. Need Help!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 66.4

Hey Guys!

I will be building a custom computer in about 2 weeks. What do you think of the following hardware:

CPU - Intel Q6600 (OC 3.0GHz)

CPU Cooler - ARCTIC COOLING Freezer 7 Pro 92mm CPU Cooler

Motherboard - MSI P7N SLI Platinum LGA 775 NVIDIA nForce 750i SLI ATX

Memory - OCZ Reaper HPC Edition 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory

Graphics Card - MSI NX8800GTS 512M OC GeForce 8800GTS (G92) 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card

Hard Drive - Western Digital Caviar SE16 WD3200AAKS 320GB 7200 RPM SATA 3.0Gb/s

CD/DVD Drives (2) - LITE-ON Black 20X DVD+R 8X DVD+RW 8X DVD+R DL 20X DVD-R 6X DVD-RW 12X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM 2MB Cache SATA DVD Burner with LightScribe - OEM

Case - Antec 900

Operating System - Windows Vista Home Premium 64

Power supply - Thermaltake Purepower 600
 

A:Custom Built Computer

Read other 16 answers
RELEVANCY SCORE 66.4

I have recently attempted to create a custom built computer for the first time, i have followed guides and got the computer all made but when i power it up it makes a loud high pitched noise! how do i get it working properly, it turns on theres just a huge noise.

I also have a second question, my new computer has a 320mb 8800GTS graphics card in it, and has 2 DVI slots on the back of it, my monitor has a DVi and a VGA, but i only have lead for VGA, but i have 2 apadtops which turn a VGA into a DVI. But the adaptor only works in the graphics card, if i put an adaptor on my monitor it doesnt fit, will the monitor still work?

Intel Core 2 Duo E6600 (2.4ghz) Socket 775 FSB1066 4MB Cache Retail Boxed Processor 112706 274 in stock £126.76

Asus P5N-E SLI 650i Socket 775 Onboard Audio ATX 125082 174 in stock £58.82

Point Of View 8800GTS 320MB DVI HDCP PCI-E Graphics Card 125325 20 in stock £148.88

Seagate 7200.10 320GB SATAII/300 8.5ms 7200RPM 16MB Cache - OEM 115418 1559 in stock £43.30

Corsair 2GB Kit (2x1GB) DDR2 800MHz/PC2-6400 XMS2 Performance Memory CL5 1.9V Matched Pair with Heat Spreaders 098710 170 in stock £63.82

Coolermaster IGreen 500W PSU - 85% Efficiency ATX12V v2.2 120mm Fan 115161 41 in stock £44.29

Gigaybte GZ-X1 Black ATX Mid-Tower Case - No PSU 126922 8 in stock £31.47

Thats my computer parts help pls!
 

A:Help with my custom built computer

Can you isolate where the noise is coming from? Could be a bad fan, noise from the case speaker, etc...
 

Read other 10 answers
RELEVANCY SCORE 66

It's made of

Antec Nine Hundred Two Gaming Case
ASUS P6TD Deluxe
Intel i7 920
Kingston HyperX 3GB (3 x 1GB)
BFG GeForce 9800 GT 1GB
OCZ GameXStream 850W
My power supplies keep burning out. I think it has to do with my old hard drives 8+ years old. They make lots of noise and sometimes aren't detected when i power on the computer. Is this likely?

At the moment, I am using two. one to power the harddrives 650W and a 350W to power the motherboard. I was using an 850W for both, but it kept messing up.
Not sure about the models of current ones.
By burning out I mean it messes up. It gets to where it will shut off and the computer will start over. I have it set in the BIOS to resume previous state after power loss. If I disable that it will stay off. As soon as I replace the power supply it will start working again.
It varies at when it happens depending on how long I have had the power supply. When using a single one it lasts about a month. With this current 2 power supply combo it has lasted about 3 months. This is a overall time frame not constantly on.

The 650W had already started restarting constantly. It would still however supply power, so I was using them separate to test the harddrive theory The 350W to keep the motherboard on to keep it from restarting and the 650W to power all the drives. I accidentally plugged a drive into the 350W, so it may still be the reason for messing them up.
Also, the 350W would not power the computer. Look at the specs above. The f... Read more

A:Custom Built Computer Problems...

Read other 16 answers
RELEVANCY SCORE 66

Greetings,
I recently built a new custom computer and used the following components:
+ Motherboard: Gigabyte GA-Z97MX-Gaming 5.
+ RAM: Corsair Vengeance Pro 16GB (4 x 4 GB) DD3-1600.
+ CPU: Intel Xeon E3-1231 V3 3.4GHz Processor.
+ Storage: Intel 520 250 GB SSD.
+ Video Card: Gigabyte GTX 970 G1 Gaming.
+ PSU: Corsair RM Series 550w.
+ Drivers: All drivers are up to date and have been installed from Gigabytes website. BIOS is also up to date.
+ Operating System: Windows 8.1 x64-bit
I am experiencing two issues and I am not sure if they are connected so I'll list them separately.
1st Issue: Occasionally when I restart the computer, Windows will go to the "Restarting..." splash screen as expected, but afterwards, the screen will go black and the restart process won't complete. The computer components are on and so is the monitor. The only way to get it out of this state is to do a hard reboot.
2nd Issue: Occasionally when I boot or restart the computer, it will be extremely laggy after start up. Here is a video with me moving Firefox with task manager showing CPU usage: https://youtu.be/2XnbYj98uF8. Notice the CPU spikes up to 40+%. Nothing else is running.
Solutions I have tried: I have tried reformatting my hard drive. Replacing my hard drive. Running MemTest86 (found no errors). Re-securing the cables on my motherboard. Turning off fast startup.
I'm not sure what else to do. Any help would be much appreciated. Thank you!
SpicyLumpia

A:New Custom Built Computer Issues

Let's start with this report.  Please do the following:
- open Event Viewer (run eventvwr.msc from the "Run" dialog)
- expand the Custom Views category (left click on the > next to the words "Custom Views")
- right click on Administrative Events
- select "Save all Events in Custom View as..."
- save the file as Admin.evtx
- zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")
- upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).
FYI - If we're looking for Event ID 41 errors (unexplained shutdowns), there's more info on that here:  http://support.microsoft.com/kb/2028504
While waiting for a reply, please monitor your temps with this free utility:  http://www.cpuid.com/softwares/hwmonitor.html
 

Read other 4 answers
RELEVANCY SCORE 66

i had a custom "nova" computer given to me. the motherboard is an ABIT-BE6-II. i have read many good things about this motherboard. the particular items that i like are the Fcable and s-video ports. i tested the hard drive and power supply on a separate computer, so i know that they work. this is my first "real" project.
there is no internet connection supplied to the unit. only mouse, keyboard, and monitor.
the hard drive is a maxtor with 30GB storage and xp installed.
the power supply is a viomax ATX model AT500.N ITEMW606. additional information written on it are as follows;


INPUT: 100V-127V/6A 60 Hz
200V-240V/3A 50 Hz

OUTPUT: +3.3V +5V +12V -12V -5V +5VSb
MAX(A): 30A 50A 25A 0.8A 0.5A 2.0A
OUTPUT: 500W


i am fairly confident that i have everything connected properly, with the exception of the hard drive. the only vacant ribbon cable was assumed to be the hard drive connection.

when i tested the computer, it showed several screens. none of them were the typical windows screen that i am familiar with. then, it displayed a screen similar to this:



Diskette Drive B: None Serial Port(s): 3FB
IDE Pri. Master None Parallel Port(s): 37B
IDE Pri. Slave None SDRam at Rows: 0 1
IDE Sec. Mast r None
IDE Sec. Slave None

PCI Device listing
Device Class
IDE Cont... Read more

A:First custom built computer project

I've never seen this screen, but with what you posted why does the motherboard not pick up your ide devices(hard drive and/or cd drive)
 

Read other 1 answers
RELEVANCY SCORE 66

When I press the power button the machine comes alive for one millisecond then dies. The Cpu fan, HDD lights, Power light, fans... All turn on. But it turns off instantly..

I plugged in everything I'm sure.. used an antistatic mat and wristband combo.. Anyway here's my build.

Case: http://www.newegg.com/Product/Produ...6&cm_re=antec_skeleton-_-11-129-056-_-Product
PSU: http://www.newegg.com/Product/Product.aspx?Item=N82E16817139006&Tpk=750tx
CPU: http://www.newegg.com/Product/Product.aspx?Item=N82E16819115215&cm_re=i5_750-_-19-115-215-_-Product
Mobo: http://www.newegg.com/Product/Product.aspx?Item=N82E16813128412
RAM: http://www.newegg.com/Product/Product.aspx?Item=N82E16820231277
GPU: http://www.newegg.com/Product/Product.aspx?Item=N82E16814150443
HDD: http://www.newegg.com/Product/Product.aspx?Item=N82E16822136284
Optical Drive: http://www.newegg.com/Product/Product.aspx?Item=N82E16827106276
Monitor: http://www.newegg.com/Product/Product.aspx?Item=N82E16824001280
 

A:Custom built computer will not start..

Read other 15 answers
RELEVANCY SCORE 66

I recently ordered the parts to build a computer and once I had everything hooked up I could not get the computer to start up.

PC components:
Raidmax Smilodon Tower with 500w PSU
Asus P8H 61-MLE Series Motherboard
Intel Core i3-2100 LGA1155 Processor
G.Skill DDR3-1333 4GB (2x2GB) RAM
Western Digital 320GB HDD

The MoBo led comes on showing that the PSU is plugged in and on but no response when the PC switch is pressed. I've tried moving the MoBo jumper to reset the CMOS with no response yet.

Also, when I unplug the ATX12V plug from the MoBo I get a light/fan response but still no boot...

Any suggestions or help?
Plz and Ty
 

A:Custom-built computer won't turn on

sounds like you may have the power and reset plugs in the wrong places read your manual and see where they need to be plugged
 

Read other 7 answers
RELEVANCY SCORE 66

Hello, i am new to building custom rigs. The first time i turned my
pc on it just will not do anything, I have installed the jumpers correctly, and the PSU cables and the PSU itself, and all the other hardware. Please Help

Alex
 

A:My Just-built custom computer will not turn on

Check to make sure that your 'clear cmos' jumpers are set correctly from the factory. Some times, only occasionaly, you will have one with the jumper set to clear. What are the specs on your newly built machine please?
 

Read other 8 answers
RELEVANCY SCORE 66

Specs: Windows 7 64bit OS w/ 16GB RAM.
Recently the dllhost.exe has been using up almost all my physical ram (amount of ram installed is 16GB). When this happens my computer is slow. don't what caused it. Right now (after restarting, runing DDS, task manager/resource monitor, and opening Firefox) my computer has used 5GB out of 16GB. dllhost.exe is using the most. also when I open my computer it takes a long time to load and the left sidebar on the explorer is not showing links.
 
My protection software is Bitdefender sphere 2013 (2-yr key). Should I be using BD or should I use something else? The only thing BD detects is a possible virus from an email in thunderbird, which I think I deleted. I did a clean install in June.
 
I sometimes use my computer as a miner (BTC or LTC) when I am not using it.
 
Yesterday there was a message saying bitcoin-qt had to quit because there was no more memory. This has never happened before.
 
I turn my computer off everynight (is this a good thing?)
 
I also play Ace of spades and minecraft on my computer. I also run mirc for long periods.
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 10.0.9200.16618  BrowserJavaVersion: 10.25.2
Run by shywolf91 at 20:56:00 on 2013-07-02
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.1.1033.18.16365.13389 [GMT -7:00]
.
AV: Bitdefender Antivirus *Disabled/Outdated* {9B5F5313-CAF9-DD97-C460-E778420237B4}
SP: Windows Defender *Disabled/Updated* {D68DD... Read more

A:Issues with custom built computer

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/499963 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 9 answers
RELEVANCY SCORE 66

Hey y'all

i want to make a custom built systwm but i have no idea to start i got 100 dollars. I'm 12 yeas old. Very Expierenced for my age. This computer will be used for an office/home used i will have a network on it soon with dsl. Want a cdrw.

Can you give me good places to buy all the nessasary hardware.

I already have
cdrom 52x
15 inch monitor
modem dont really want it but i do
new video card.

I live in atlanta if you have any stores i can go to in atlanta thats great.

Need a AMD athlon xp like around 1.8 to 2.1 ghz system.
Need:
Good motherboard & cpu-with onboard parellel,usb,serial,lan,etc.
cdrw
floppy
case
hard drive whatever i need

Need to buy them online or in atlanta

Cheap but good stuff
 

A:Wanna buy a custom built computer

Read other 10 answers
RELEVANCY SCORE 66

I just built a pentium 4 computer, but the keyboard works for about a minute then it stops, so i cant set up the bios.
 

A:neep help with custom built computer

Read other 8 answers
RELEVANCY SCORE 66

I ran Belarc and here is what it reported:
Operating System System Model Windows XP Professional Service Pack 3 (build 2600) Enclosure Type: Desktop Processor a Main Circuit Board b 2.20 gigahertz AMD Athlon 64
128 kilobyte primary memory cache
512 kilobyte secondary memory cache Board: http://www.abit.com.tw/ NF8/NF8-V (NF3 Series) 1.x
Bus Clock: 200 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 09/11/2006 Drives Memory Modules c,d 160.03 Gigabytes Usable Hard Drive Capacity
139.13 Gigabytes Hard Drive Free Space
_NEC DVD_RW ND-3550A [CD-ROM drive]
ST3160827AS [Hard drive] (160.04 GB) -- drive 0 2048 Megabytes Installed Memory
Slot 'A0' has 1024 MB
Slot 'A1' has 1024 MB Local Drive Volumes
c: (NTFS on drive 0) 160.03 GB 139.13 GB free Network Drives None detected Users Printers local user accountslast logon Administrator 5/18/2009 5:29:02 PM (admin) local system accounts Guest never
HelpAssistant never
SUPPORT_388945a0 never
Marks a disabled account; Marks a locked account Microsoft XPS Document Writer on XPSPort: Controllers Display Primary IDE Channel [Controller] (2x)
Secondary IDE Channel [Controller] (2x)
Standard Dual Channel PCI IDE Controller (2x) NVIDIA GeForce 7600 GS [Display adapter]
ATE ITOR [Monitor] (18.2"vis, May 2001) Bus Adapters Multimedia Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller (2x) Realtek AC'97 Audio Communications Other Devices
Motorola SURFboard USB Gateway
Auto IP... Read more

A:No sound on custom built computer. help, please!

Read other 9 answers
RELEVANCY SCORE 66

My husband bought a custom-built PC from CyberPowerPC about a month ago. Ever since he got the PC we have had a problem with the screen glitching...it almost looks like someone hit the screen. Then, it will go to BSOD. I have posted an image of the error screen we are getting. Any help would be greatly appreciated. Also, we have uninstalled and reinstalled Windows 7, the graphics drivers, and also have been very selective about the Windows Updates because that was causing an issue before.
 

A:BSOD on Custom Built Computer

Welcome to the forum.
That is probably a video card error. It should still be under warranty contact Cyber Power.
 

Read other 3 answers
RELEVANCY SCORE 66

Recently, I have encountered several computer problems. The first of all of my problems started before I installed the new RAM, when Windows XP got the BSOD before startup. Trying to fix the problem, I decided to attempt to repair. Unfortunately, I have several Window XP disks and each one was somehow corrupted. Then, I wanted to do a fresh install. Trying to get to the fresh install was a pain however, as I was put into an endless "Setup is continuing" every bootup.

Anyways, this is besides the point. I finally got Windows XP to install, and once I did this, I installed DDR2-Dual Corsair 800 5-5-18T RAM cards. So, the computer was running very smoothly, and in the middle of playing "Platform Racer 2" the computer crashed. Ok, no big deal, this happens with a custom built computer every now and then. Ok, so I go back to the computer and browse the net - CRASH! I decided it may be the RAM, and I tried switching the slots. However, when this happened, I recently realized I did something incorrectly and only 2GB are active. The time of the computer running is about 5X longer, and I have yet to see a crash.

Which leads me to the main point - Is there a reason that only 2GB works with the computer, and not 4? It may just be rotten luck, but I am unsure.

Specs:
ASUS P5ND2-SLI Motherboard - 4 Slots, 8GB Supported
Intel Pentium 4 CPU 3.2GHz
OS = Windows XP Pro. SP2 32Bit
NVidia GeForce 7800 GTX

Any advice would be greatly appreciated. I would love to fi... Read more

A:Custom Built Computer crashes with 4GB of Ram, but so far, not with 2.

Try to check the frequency of RAM which is newly install . Is it match with your mother board?
The BSOD error mainly came with the problem of RAM.

Read other 8 answers
RELEVANCY SCORE 66

I came home to find out my computer had been fried, well our home computer. My brother told me the news. He said while it was on it made a popping noise and some smoke came out. I know some things about computers, the most in my household but not enough to know how to fix or build a computer. I figure it's fried though. I called a few pc repair stores and a few even said they have dealt with emachines before. They said usually when the power supply goes out it takes out the motherboard. So after calling about six or so stores, my cheapest price on replacing both the power supply and motherboard with labor was $150. My first question is, is that a reasonable price? Or should i look elsewhere and maybe even try learning how to put it in myself? So i thought well I?m putting that much into an old machine, bought in 2002, maybe i should put in double that and i can get a better machine. The most i could probably put into it is $400. If anything in my old pc is usable i could even use them and of course my monitor. Looking through Google there are so many places that sell parts and already built pcs. There?s stores to and eBay. So it?s pretty hectic. If I do fix what I have now and its under $100 I can do it soon. If I have to spend $400 then I may have to wait til February because of finical issues. I really don?t want to wait til February but if I did order parts online I?d have to wait anyway. Below is the specs of my emachine, well what I could find. Any advice ... Read more

A:first computer fried, so looking into a custom built one

Do you... game by any chance? Judging by your old machine probably not, but thought I might as well ask.

Here's a great system that will not only be faster than your eMachines, but upgradeable (new AM2 socket and PCI-E x16, DDR2) and cheap (but not cheap in quality).
Motherboard:http://www.newegg.com/Product/Product.asp?Item=N82E16813128029
It's a nice Gigabyte board, that's MicroATX, uses the AM2 socket, DDR2 ram (four banks, up to 16GB), and has a nice PCI-E x16 slot for later graphics expansion. It has good onboard audio (8 channels) and graphics (excellent for office use, not good in games; but it can be upgraded due to the PCI-E x16 slot).

Let's see, so far 74.99$ + 6.13$ = 81.12$.

CPU:http://www.newegg.com/Product/Product.asp?Item=N82E16819104301
This is an excellent budget CPU. At 1.6GHz is may *seem* slow, but it is NOT slow at all. Again, great for office use, and if overclocked (like I have mine, at 2.16GHz) good for even gaming. Not only that, but is 64 bit.

Now it's 43.00$ + 0.00$, so that's 43$, add it to the mobo and we're up to 124.12$.

RAM:http://www.newegg.com/Product/Product.asp?Item=N82E16820145530
AMAZING ram. It's a bit slow compared to more high-end models (DDR2 533 vs. DDR2 800), but again for office use and non-hardcore gaming it's fine. It's 2 sticks of 256MB running in dual channel, which is faster than 1 stick of 512MB in single channel. 512MB should be fine for office work, and O.K. fo... Read more

Read other 42 answers
RELEVANCY SCORE 66

I get BSOD on my computer as soon as Windows 7 boot up. If I unplug the power supply for about 30 seconds and replace it, the computer will boot up and run for about 30 minutes before going back to BSOD. I have noticed that the computer will also have lines in the screen etc right before it goes to BSOD. The computer temps are running around 35c - 50c at its highest. The computer specs are listed below.

ID-INFO 321082 BLKPEARL 1 0.00 0.00
MODEL1 C SERIES 1 0.00 0.00
SW-152-120 JUST CAUSE 2 GAME 1 0.00 0.00
SW-152-134 BATMAN ARKHAM CITY GAME COUPON 1 0.00 0.00
KB-153-101 BLACK MULTIMEDIA/ INTERNET USB KEYBOARD 1 0.00 0.00
MN-172-103 SCEPTRE X270W 27" 16:9 1920 X 1080 BLACK LCD 1 248.00 248.00
MO-107-101 BLACK USB MOUSE 1 0.00 0.00
CU-197-206 INTEL i7-960 3.20GHZ 8M 1366 RETAIL 1 1,279.00 1,279.00
HD-403-306 1TB SATA III 7200 RPM 3.5" HARD DRIVE 1 0.00 0.00
RM-317-401 KINGSTON HYPER X DDR3/1600MHz 2 GB MEMORY 6 0.00 0.00
FA-205-110 COOLERMASTER V6 GT CPU COOLER FAN 1 22.00 22.00
CS-425-101 ... Read more

A:BSOD on Custom Built Computer

Please upload a report

http://www.techsupportforum.com/foru...ta-452654.html

Read other 9 answers
RELEVANCY SCORE 66

Specs:
Windows XP Home (SP3)
Abit AV8 Motherboard
AMD Athlon 64 3200+ @ 2.1GHz (Motherboard/CPU was obtained by a friend, who might have done something to it. Overclocked?)
Nvidia GeForce 7800 GT
4x256MB (1GB) DDR-333 RAM

My current RAM configuration is terrible. 4 slots, all 256MB DDR-333. 1 GB. I would like to reach 2GB+. Now that RAM is affordable, I'm about ready to purchase some more. But I need help.

Abit's official website on my motherboard says:
"Four 184-pin DIMM sockets (Un-buffered Non-ECC DIMM) Dual Channel DDR 400/333/266 (Max. 8GB)". Click to expand...

Does this mean I'll be able to fill 2 slots with 1GB DDR-400's each, and the other 2 my 256 DDR-333's? I'm unsure if mixing types like that would work.

Also, quick question about CPU's. I have a Socket 939 motherboard, and I'd like my CPU's clock speed to go up. There aren't many other processors that are higher than 2.1GHz for Socket 939 (but if there are they're usually cheap)... so do you recommend I try to learn how to overclock or try to save up for a whole new motherboard? I know my setup is somewhat out-of-date.
 

A:Upgrading RAM/CPU for my custom built computer

Read other 7 answers
RELEVANCY SCORE 66

? OS - Windows 7 x64
? clean installed on 120GB Corsair SSD (CSSD-F120GB3A-BK)
? full retail version
? <6 Months old
? <6 Months old - have you re-installed the OS? No

? Intel i7-3770K Ivy Bridge (BX80637I73770K)
? MSI N670GTX-PM2D2GD5
? ASUS P8Z77-V LK LGA 1155
? Antec HCG-750 750W ATX12V

This was a custom build I completed early August.

A:BSOD custom built computer

There are not any .dmp files in the upload to look at.
Check in the C:\windows\minidump folder to see if there are any, if there are zip up and upload, if not check the PC is set to collect mini dumps.

Check the PC is set to collect mini dumps> How to Check Computer is set to collect dumps

Read other 4 answers
RELEVANCY SCORE 66

I have a custom built computer I put together in 2011.  It didn't have problems until 6 months ago.  The computer will freeze at random times after streaming music from iheartradio, watching youtube, or playing a video game.  When the computer freezes the sound turns into a blaring noise until I hard reset the thing.  I have tested running the computer with each RAM stick by itself and without the graphics card, and the problem still persists.  I have run chkdsk and still have not found anything that helps me pin point the issue.  What can I do to figure out what is causing the freezing issue?
 
Thanks for the help.

A:Custom Built Computer Freezing

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

Read other 8 answers
RELEVANCY SCORE 66

Hello,

I get a BSOD at mostly random times. I've attached the files as per the posting instructions. Any help is appreciated.

Edit #1:
I ran driver verification - no BSOD occurred. Attached is the result of verifier /query.

A:BSOD - Custom Built Computer

Additional Information.

Read other 5 answers
RELEVANCY SCORE 66

Hello,

A small bit of history first:
The computer in question is a custom build that I had been using for around 5 years with no problems at all. I then gave it to my sister after a complete format, and she has started to experience many BSoD's with it. Please note that only the internal hardware is the same, she may be using external hardware (USB devices) that are different to what I was using, which I believe may be the problem here.

I did try running Driver Verifier, and the computer would not boot up. It would BSoD into an IRQL_NOT_LESS_OR_EQUAL.

Sometimes, I noticed the computer would not even get past POST. It would finish all the memory tests, then just restart.

I have attached the entire folder of the SF Diagnostic Tool. If anyone could help shed some light on why I am receiving these BSoD's and how to fix it, I would really appreciate it.

A:Various BSoD's on Custom Built Computer

Hi aommaster.

Apparently the BSODs are seeming to be some sort of driver fault, but the failing driver/s are not showing up in the crash dumps.

Code:
INVALID_KERNEL_HANDLE (93)
This message occurs if kernel code attempts to close or reference a handle
that is not a valid handle. Only invalid or protected handles passed to NtClose
will cause this bugcheck, unless bad handle detection is enabled.

Code:
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
Enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot O... Read more

Read other 9 answers
RELEVANCY SCORE 66

Hey everyone,
This is my first post on the forums, so I don't know if this is a bad question or not. I have a custom built computer that has never worked. When I first got it it would never POST or boot at all. It sounds like it is working, but nothing comes up on the screen. I have tried almost everything. I returned the motherboard three times and it tested OK everytime. I also replaced the power supply with a 650 watt Ultra Power Supply. Still nothing. Here are the specs:

AMD 3000+ Dual Core CPU

Asus A8N-SLI Motherboard

1 GB Corsair RAM

EVGA 7300 Video Card

SeaGate 120 GB SATA HDD

If you need anymore specifics, let me know. I will be glad to look them up again. I have booted it up a few times by luck, but it managed to lock up within 10 minutes of it turning on. I can also boot it up when I reset the CMOS. Then it will boot up. Any suggestions will be greatly appreciated. Thanks.
 

A:Custom Built Computer Will Not POST

Load it with Fail-safe opinion.

You should set your A8N-SLI PCI - X small card (dual mode change to single mode)

I dont know about your ram... I think A8N-SLI only support DDR2.
 

Read other 45 answers
RELEVANCY SCORE 65.2

I just built a new custom system, put it all together and the cpu fan, case fan and power supply fan is working but nothing is coming up on the monitor, does anybody have any ideas as to wat my problem may be? and how to fix it?
 

A:New custom built computer wont start

If there is no beeps chances are the video card is not sitting properly or you forgot to plug in a molex connector to the video card.
 

Read other 3 answers
RELEVANCY SCORE 65.2

Hi all, i am going to be building my first custom-built computer tomorrow. Here are the specs:

MSI K8T Neo2 Motherboard
AMD Athlon 3200+
NEC DVD/CD Burner RW
Samsung Hard drive 160 GB
Corsair 1 GB RAM
ASYS Case with 450 Watt PW Supply
Diamond Shadow Radeon Video Card 128 MB
D-Link WIreless G DWL-G510 Adapter

Can you give me some guidelines/tips to building my first computer. I will be doing it alone, and I just found out that my case does not come with a manual. My CPU Fan/Heatsinki is a very good one, and it came with thermal paste. I have never glued a CPU to the motherboard as well as the heatsink. Please give me some advice so I don't make any mistakes tomorrow while building it.
 

A:Tips for building my first custom-built computer

Read other 12 answers
RELEVANCY SCORE 65.2

Hey Everyone,
I just recently built a computer from a local computer store "Thrift King". The computer was meant for liquid Simulation and Highly Intense Graphics design and of course a few video games
Since the day I brought it home I have been getting random BSOD and also some random restarts. The computer would be running fine, then it would just flash to blank screen and restart. Sometimes after my BSOD my keyboard (usb) is not readable and so I must reset as I need to input a password at windows login.
I took the machine in right away to have it looked at. They flashed my bios and updated a few drivers. Also I believe they changed the ram however I still get the issues. I was asked that if it happens to record all BSOD so that they can better pin point the issue. I would like to find the issue out myself so I can tell them what to fix. Last time I had them look at it I got the vibe that they weren't going to try there hardest and I also had to fight with them as they could not duplicate the BSOD. Anyways letís start with my system specs and I will also post the 10 BSOD I have recorded.

Computer Case - Antec 900 (comes with 4 fans installed)
Power Supply - 900w OCZ MODXSTREAM Power RE
Mother Board - GA USB3 Sata3 890 DDR3 1394
Processor - X6 1090T 3.2 GHZ AM
Graphics Card - HD 5770 IG GDDR5 XFX
OS - Windows 7 Premium 64 Bit
CD Drive - 22x DVD +DVDRAM Black Sata
Hard Drive -WD 1TB SATA3
Ram -2g DDR3 1333PQI * 4

BSODS
www.Alliemunro.com/images/0927002... Read more

A:Custom Built Computer - Multiple BSODS

The problems suggest power supply, motherboard, or memory problems - or perhaps just a bad connection.

What voltages are being reported for the power supply? You should find this information in the BIOS or you can use something like speedfan to obtain them.

edit: If you are overclocking, this could be the source of the trouble. Restore the system to all defaults in the BIOS.
 

Read other 1 answers
RELEVANCY SCORE 65.2

Hello,

I am running Windows 8 64 bit Professional. Occasionally, I'll get seemingly random BSOD's when trying to game or watch a video on Youtube. The error that shows is a KERNEL_SECURITY_CHECK_FAILURE.

The computer also sometimes hangs on restart, then BSOD's with a DRIVER_POWER_STATE_FAILURE.

This is a custom built desktop. This is extremely annoying. Thanks in advance for the help.

I have attached my dump zip file.

A:Custom Built computer random BSOD's

No memory dumps in the uploaded reports. Please:





Upload Dump Files:
NOTE: If using a disk cleaning utility, please stop using it while we are troubleshooting your issues.
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service. Then post the link to it in your topic so that we can download it.

Also, search your entire hard drive for files ending in .dmp, .mdmp, and .hdmp. Zip up any that you find and upload them with your next post.

Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDumpMore info on dump file options here: Overview of memory dump file options for Windows 2000, Windows XP, Windows Server 2003, Windows Vista, Windows Server 2... Read more

Read other 7 answers
RELEVANCY SCORE 65.2

? OS - Vista/ Windows 7 ?
Windows 7

? x86 (32-bit) or x64 ?
64x

? What was original installed OS on system?
Windows 7

? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)?
OEM

? Age of system (hardware)
Recently bought off of Tigerdirect

? Age of OS installation - have you re-installed the OS?
Factory reset, which had Windows 7 pre installed about a month ago.

? CPU
i7 4770k

? Video Card
Intel HD graphics 4600

? MotherBoard
Intel DB85FL_

? Power Supply - brand & wattage
Forgot the brand, 750w

? System Manufacturer
INTEL

? Exact model number (if laptop, check label on bottom)

Laptop or Desktop? Custom Desktop

A:BSOD Error Custom Built Computer

Hi Gaining_Levels,

Welcome to TSF! :)

Can you confirm that your computer has all of the current Windows Updates installed? If you can check that whilst I analyse your logs that'd be great.

Regards

Read other 10 answers
RELEVANCY SCORE 65.2

I just built a new computer and upon turning it on i got this message," reboot and select proper boot device or insert boot media in sleected boot device and press a key". I have checked the BIOS if the CD Rom and Hard Drive are in the right priority and detected. I also changed the configurations around and still have the same problem. Could anyone help me?
 

A:Solved: Custom Built Computer Error

Read other 16 answers
RELEVANCY SCORE 65.2

So when I turn it on it powers up and all the pretty LED and fans come on, it beeps once, then the moniter flashes a few times and just stays blank. Here are the specs
Item(s) shipped from CA Tracking Number: #713834028311
Track 1 NEC Black IDE DVD Burner Model ND-3540A - OEM
Item #: N82E16827152047 $43.99
Item(s) shipped from NJ Tracking Number: #702629794927
Track 1 ASUS A8N-SLI Deluxe Socket 939 NVIDIA nForce4 SLI ATX AMD Motherboard - Retail
Item #: N82E16813131517 $165.00
Track 1 eVGA 256-P2-N376-AX Geforce 6800GT 256MB GDDR3 PCI Express x16 Video Card - Retail
Item #: N82E16814130215 $345.00
Track 1 AMD Athlon 64 3200+ Venice Integrated into Chip FSB Socket 939 Processor Model ADA3200BPBOX - Retail
Item #: N82E16819103535 $190.00
Track 1 CORSAIR ValueSelect 1GB (2 x 512MB) 240-Pin DDR2 SDRAM DDR2 533 (PC2 4200) Unbuffered Dual Channel Kit System Memory Model VS1GBKIT533D2 - Retail
Item #: N82E16820145526 $87.85
Track 1 SONY Black 1.44MB 3.5" Internal Floppy Drive Windows 98SE/ ME/ 2000/ XP - OEM
Item #: N82E16821103116 $10.00
Track 1 Seagate Barracuda 7200.8 ST3250823AS 250GB 7200 RPM Serial ATA150 Hard Drive - OEM
Item #: N82E16822148065 $123.00
Track 1 Saitek Gamers' Keyboard PZ08A 2-Tone USB Wired Sleek contemporary Keyboard - Retail
Item #: N82E16823175101 $43.00
Track 1 SONY Black IDE CD-ROM Drive Model CDU5215 - OEM
Item #: N82E16827101129 $15.99
Track 1 ZALMAN CNPS7700-CU 120mm 2 Ball Cooling Fan - Retail
Item #: N82E16835118115 $46.99
Track 1 Logitec... Read more

A:Blank Screen with new custom built computer

Maybe it's just me, but I don't see any operating system having been purchased.
 

Read other 2 answers
RELEVANCY SCORE 65.2

Hi team,

I built my own computer a few weeks ago, after a few days I started getting the BSOD randomly. I have never had the time to sit and troubleshoot the issue until now.

I have tested the RAM but this did not help the issue.
I have performed a clean install of Windows 7
My machine has up to date drivers
My machine has up to date Windows Updates
I have ran SFC /SCANNOW
C:\Windows\system32>SFC /SCANNOW
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files and successfully repaired
them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
example C:\Windows\Logs\CBS\CBS.log
My computer does not look like it is over heating

==================================================
Dump File : 040914-57500-01.dmp
Crash Time : 09/04/2014 16:18:04
Bug Check String : MEMORY_MANAGEMENT
Bug Check Code : 0x0000001a
Parameter 1 : 00000000`00041287
Parameter 2 : 00000000`00000038
Parameter 3 : 00000000`00000000
Parameter 4 : 00000000`00000000
Caused By Driver : nvstor.sys
Caused By Address : nvstor.sys+16385
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+75bc0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\040914-57500-01.dmp
Processors C... Read more

A:Custom Built Computer - Random BSOD

How many passes did you take memtest for?


Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\DPC4LF-10_04_2014__91543_41\040914-57500-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`02819000 PsLoadedModuleList = 0xfffff800`02a5c6d0
Debug session time: Wed Apr 9 21:18:04.183 2014 (UTC + 6:00)
System Uptime: 0 days 3:18:31.201
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
.............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging informat... Read more

Read other 1 answers
RELEVANCY SCORE 65.2

I have a custom built computer that seems to have something wrong. It is constantly freezing, mouse getting stuck and just not seeming right. I has a GIGABYTE GA-Z68X-UD4-B3, I5-2500K, 120 Crucial SSD and many other Mechanical drives installed.

I had Windows 8 Pro installed and noticed the problems starting. I then installed Windows 7 thinking it maybe software, but problems persisted. What faulty hardware could it be and what tests should I start running. Memtest, what hard drive test is there for the SSD where the OS is installed. Appreciate some help on this issue.
 

A:My custom built computer is constantly freezing!

Read other 16 answers
RELEVANCY SCORE 65.2

Sorry guys this is my first post on this website and might've put this I. The wrong topic but I really can't figure out why my computer won't connect to my monitor. (I'm a noob with computers) I've tried everything I could think of I connected an vga to HDMI (my monitor isn't up to par) a vga a Dvi, Dvi to vga and vice versa and I know that at least the dvi works because I tried it on my other 3 computers... I don't have my pic specs because I never checked when it worked before... I also tried to remove my 2 sticks of ram at the same time but not individual (I'll try that) and all LEDs work (I'm pretty sure) and all fans work plz help I can't find anything on any forms so I'm counting on you guys please help!

Bye!
 

A:My custom built computer won't connect to monitor!

Oh and I've tried switching my monitor to vga and dvi didn't work it still says "no signal"
 

Read other 2 answers
RELEVANCY SCORE 65.2

Hello,

I am building myself my own computer (as seen in link below)

http://forums.techguy.org/hardware/667985-good-build-not.html#post5477880

and i was wondering if my Dell SATA hard drive 160GB would work in it, there have been cases i read, some guy change his mobo on a dell PC, and the dell computer dident want to run with that other motherboard, i have been told dell only works with dell parts.
Thanks in advance, Ryan
 

A:Will Hard Drive Fit in Custom Built Computer

Read other 16 answers
RELEVANCY SCORE 65.2

Okay, this is the problem im facing. Back in 2012 I bought windows 8 for 16 dollars from Microsoft online. I was using it on my laptop but it recently died. I talked to Microsoft to disable it on that pc and they did that. Now I have built a new computer. I am wondering on how to install it on there. When I downloaded the windows 8 installer and installed it on the usb it didn't properly install on the computer. It said drivers were not found and things like that. I then realized that it was just for updating from windows 7 and the others. After searching around on the web i found that i could use the windows 8.1 installer with a generic key but it doesn't seem to work anymore. It just says it cant connect to internet. I also dont have an optical drive on my pc so i cant use dvds. Now how can i install windows 8 on it. Anybody know?

BTW: I have windows xp on my ancient computer. That means that if i will have to do things that require higher windows versions, I will have to do it at my friends house.

A:Install windows 8 on new custom built computer.

If this would not work i could get my brother (Student at UVIC) to get me windows 8.1 embedded industry from dreamspark. Would i be able to install that?

Read other 7 answers
RELEVANCY SCORE 65.2

I recently built a new computer and have been getting between 1 and 4 BSODs a day. They seem to occur at no particular occasion when I am not doing a particular task. I have had blue screens when the computer is idle, when playing a game. Can someone please help me find out the issue here?

A:0x0000001e BSOD on custom built computer

7b35dbf48cc2b83b38bef5a3a816de54.png

Here is a gyazo of my specs in case you don't know them.

Read other 9 answers
RELEVANCY SCORE 65.2

I just recently built my new computer, and have noticed that i keep getting IRQL_NOT_LESS_OR_EQUAL bsod. This tends to come up after playing a game for an hour or so, but the times are usually random. It has even happened while running other programs....which is slightly annoying. I thought it might be the ram cards, so i took one off, which delayed the issues it seemed...but they are back. I can still run windows and everything, so not sure how severe it is.
 

A:new custom built computer bsod issue

Read other 16 answers
RELEVANCY SCORE 64.4

I have a computer that I built a few years back and recently its performance has been absolutely terrible and borderline unusable. I have a fresh install of Windows 7 (32-bit) and I have included a full .txt file giving all the details of my hardware. I run the "gadget" that shows you your CPU and RAM usage and it seems like the processor is always working its butt off, even if the computer is doing nothing other than bringing up the right-click menu on the desktop. I am wondering which parts could possibly be causing this utterly horrific performance or if possibly it is just wear and tear over the years that have caused my hardware to function poorly. I recently upgraded my video card and RAM, but it made little to no difference. I primarily use the computer for gaming, but even browsing the internet or watching a low definition youtube video is very choppy and virtually unwatchable. Thank you in advance for your input!
 

A:Solved: Custom Self-Built Computer - Poor Performance

Read other 16 answers
RELEVANCY SCORE 64.4

First of all, let me say I consider myself somewhat of an expert in computers. I built this box from parts, set up a custom partitioning scheme, G:\ for program files, mounting a partition under my desktop etc. So two days ago I updated JRE (java). I don't know if that sparked the problems or not, but a few hours later my comp went down with a blue screen of death indicating hard drive problems STOP 0x0...77 (0xC0...185 0xC...185, 0x07D0F000).This happened a few times. When I try to reboot off the BSOD my comp doesnt see the main hard drive (the only one on a SATA cable, my second drive is on IDE with my CD ROM). When I take the power cord out then reboot I can boot normally. Since I can still boot normally, I am thinking this is not a hard drive issue but some sort of viral thing. Plus the system restores are wiped which is very symptopmatic of a virus. Plus the system really did hang whenever I ran a virus scanner. Now, normally I am very careful. I use two different browsers, keep my comp updated, dont click on anything suspiscious (and i am pretty paranoid about links) run 2 virus scanners and 2 adware blockers. So when I cold boot the box off a BSOD, It boots, no problem, then runs a little bit, but then hangs with a similar STOP 0x0...77 especially when it is doing something. It hung once when i was backing up my desktop (work) partition, it hung when I booted Opera from my quicklaunch, etc. What is strange is that the comp is also running slower. ... Read more

A:Custom Built Computer suddenly started BSODing...

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers
RELEVANCY SCORE 64.4

I recently built a computer and am getting BSOD's on a relatively frequent basis. After checking around I have no idea what the problem could be. This is the first build I have ever done.

Here is what I know:
Using WhoCrashed, it tells me that in 5/6 crashes it was related to ntoskrnl.exe, and in the 6th is was related to ntkrnlmp.exe

The BSOD's are not recurring, that is I will get one, then go back and do the same thing I was doing before, and it will be fine.

About a day after installing everything my integrated wi-fi card stopped working, I shrugged it off to a faulty antennae, and went and got a Netgear WNDA 3100v2 Wireless dual band adapter (it is faster and holds a signal better anyways). Not sure if it is related to the BSOD's.

Any other questions feel free to ask, attached are the dump files and system health report as required by the forum, as well as the screen shot of the WhoCrashed report.

For system specs look at my profile or feel free to ask. Thanks!


EDIT: Also forgot to add that I am running Windows 64-bit and it is an OEM, everything was installed in the past 4-5 days when I took them out of the box, and this is the only OS I have installed on the system.

Also I tried to run the windows repair program of the OS disc and it was not compatible, not sure if that is due to OEM or related to the problem.

A:BSOD on new custom built computer. Related to ntoskrnl.exe

PROBLEM DEVICES

Code:
Atheros AR9485 Wireless Network Adapter PCI\VEN_168C&DEV_0032&SUBSYS_850D1043&REV_01\4&299066B9&0&00E6 This device is disabled.
PCI Simple Communications Controller PCI\VEN_8086&DEV_1E3A&SUBSYS_84CA1043&REV_04\3&11583659&0&B0 The drivers for this device are not installed.
You will either need to uninstall these drivers and then install the latest version or perform a clean installation of them.
DRIVERS
The following drivers need to be updated:


Code:
hamachi.sys Thu Feb 19 21:36:41 2009
These drivers can be found by searching them in Google and then finding the associated software or driver. Finally, find the latest version of this driver or software and download and install it. Some of the drivers may also be found here (if the driver says 'Windows Update' simply make sure all Windows Updates are installed).

You should also update any other drivers you can think of including graphics, audio, chipset, SSD etc.
SOFTWARE
You have Norton installed, is that correct? At least to test, uninstall it and install MSE (Microsoft Security Essentials) instead.
Microsoft Security Essentials - Free Antivirus for Windows

Please also uninstall any other Symantec products you have including Endpoint and Ghost as some of your dumps point toward Symantec drivers.
HARDWARE
Run a chkdsk on the system partition to check for bad sectors or system errors.
Disk Check

Read other 5 answers
RELEVANCY SCORE 64.4

DESKTOP-I4CBMUJ-Sun_10_04_2016_234019_44.zip

Hi there! So about half a year ago, my dad decided to give me the money to build my own PC. So I bought all the parts and my dad and his friend put it together for me (I'm terrible with handling hardware).
It works great! It runs games really well, is really fast, and all that nonsense. (at least compared to the old laptops I used to use)
Here are the parts I used for this.
Except I always have an error of some kind every single day. Usually it's just the Windows 10 "blue screen" with the sad smiley face with the accompanying error message but sometimes I get random stuff happen after booting up. These are always minor things that never heavily affect anything, and always get fixed with a quick reset, but I still worry that this isn't something that should be happening and I want to see if there's something wrong with something and if I should get it fixed before it gets worse.

I've tried reformatting my computer, because my sister berated me when I asked if its because the hardware wasn't put together properly, telling me I probably just downloaded something suspicious, but I still get the errors.

It was suggested that it was probably my RAM, and I was instructed to run memtest, but it did not bring up any errors. Here's a picture of my memtest screen after 8 passes.

Obviously I attached the ZIP file from the little instructions thinger, but I decided to write down and include each error message and other non-BSOD er... Read more

Read other answers
RELEVANCY SCORE 64.4

I'm using a custom-built computer. The issue is ever since Saturday (July 30, 2016), it powers off without warning.
OS: Windows 7 Ultimate 64-bit SP1 Full Retail
Age: 3 yr
 
CPU: AMD FX-4100 Quad-Core 8.0 GB RAM
VC: R7950 Twin Frozr 3GD5
MB: ASRock 970DE3/U3S3
PSU: Antec EarthWatts EA-750 Green
 
Desktop
I cannot afford to replace anything.
The computer only shuts off while running Windows normally. It has no issues when running CHKDSK on startup, or running in Safe Mode. I don't know how to begin to diagnose this problem.

A:Custom Built Computer Shuts Down Randomly in Windows

Let's try looking at these 2 sets of reports:1)  Please run this report collecting tool (even though you may not be experiencing BSOD's) so that we can provide a complete analysis: (from the pinned topic at the top of the forum)   http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/FYI - I don't often use the Perfmon report, so if it doesn't work please just let me know.2)  Please do the following:- open Event Viewer (run eventvwr.msc from the "Run" dialog)- expand the Custom Views category (left click on the > next to the words "Custom Views")- right click on the "Administrative Events" heading- select "Save all Events in Custom View as..."- save the file as Admin.evtx- zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")- upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).FYI - If we're looking for Event ID 41 errors (unexplained shutdowns), there's more info on that here:  http://support.microsoft.com/kb/2028504While waiting for a reply, please monitor your temps with this free utility:  http://www.cpuid.com/softwares/hwmonitor.html 

Read other 2 answers
RELEVANCY SCORE 64.4

was recently playing some league of legends and browsing youtube and my screen flashed went black for a few seconds and i got a blue screen of death ive read other posts there is no name or .sys file to indicate what caused it just this in the technical information:

***STOP: 0X0000001E (0xFFFFFFFFC0000005,0xFFFFF80002EA7047, 0X0000000000000000,0X0000000000B90000)

i have read the forums and it tells me to download that file to collect the dump data and to zip it up so you guys can see it but problem. the BSOD happens around 2 seconds after loading up the desktop , ive tried a system restore, still its happening. restar computer.... logs me in lasts a few second , mouse freezes, screen flashes black and theres the blue screen of death dislaying the same thing over and over again. anyideas on how to install this or will i have to do a full install of windows 7 again? i have been having graphics card issues every now and again before the dump for instance watcing a youtube video the youtube player would turn full green and it would say a graphics related so and so has stopped working. Yesterday i got it to work and not show me the screen of death for around 3 hours when i restdarted it bam the screen again. when it did work for taht limited amount of time it said somethign about a catalyst center had stopped working? my graphics drivers i thught were uptodate as im using a RADEON HD5850 Graphics card. please help

A:BSOD on 5 month old custom built computer 0X0000001E

http://www.sevenforums.com/crashes-d...tructions.html

Read other 3 answers
RELEVANCY SCORE 64.4

Okay right now i am on my laptop and it has no problems with the internet. We just reformatted the computer and installed the cd that came with the motherboard(the drivers). Also I don't know if I am supposed to set up a network wizard. The problem I have is with the the custom built computer. So when I try to download google chrome or anything else it takes forever. Google chrome is taking up to 9 hours to download. Firefox setup is downloading and it says it will take 42 seconds and it wont move from that. Seems very slow also I am using RaLink wireless LAN card RT3062. Also I tried to do a speed test and speedtest.net it didn't work. I am using verizon frontier. Thanks for help in advance.

EDIT: the mother board is a Gigabyte MA785GM-US2H
 

A:Weird problem with internet on a custom built computer.

Read other 11 answers
RELEVANCY SCORE 64.4

Just built this computer and had no problem and out of no where after a couple weeks i started getting bsod ive done "sfc /scannow" no discrepancy ive scanned multiple things including the harddrive, virus scan and entire computer with nothing coming up i included sf debug files as i do not know what to look for in them.

A:BSOD custom built computer not shure what to due, randomly happens.

Please help thank you

Read other 9 answers
RELEVANCY SCORE 64.4

Hey all, like the title says my new custom built computer is randominly locking up. Either when I'm playing a game, surfing the web, watching a movie, or sometimes when I'm not doing anything and its just on.

Here's a quick look at the stats:

Western Digital Caviar Blue 500GB 7200 RPM Internal Hard Drive

AMD Phenom II X4 955 Black Edition Deneb 3.2GHz Socket AM3 125W Quad-Core Processor

ASUS M4A78T-E AM3 AMD 790GX HDMI ATX AMD Motherboard

EVGA GeForce 9800 GT 1GB 256-bit GDDR3

Microsoft Windows 7 Home Premium 64-bit 1-Pack

I did buy 4 gigs of RAM but they sent me DDR2 instead of DDR3. So I went to the store and picked up the only thing I could find. 2 gigs of DDR3 RAM. The RAM is the only thing I can think of that is causing the computer to lock up so randomly. But if anyone has any idea as to what could be causing it lock I'd be very great full.

Thanks
 

A:Custom built computer locks for no apparent reason

What is the brand and model of that 2 gigs of RAM you ended up installing? Perhaps it isn't compatible with the Asus motherboard or maybe the RAM voltage needs to be changed from the default motherboard voltage.
 

Read other 4 answers