Over 1 million tech questions and answers.

Solved: HDMI adapter plug stuck in Lenovo T420 display port

Q: Solved: HDMI adapter plug stuck in Lenovo T420 display port

I just purchased an adapter plug that allows me to connect my Lenovo/IBM thinkpad (T420) to my HDTV by plugging the HDMI cord into my TV and the other end to this adapter plug which converts the HDMI cable into a male plug which fits into my display port (there is no HDMI port on this model computer). It worked, but now I can't remove the adapter plug...it's stuck in the laptop display port. I do not know if the problem is caused by the male adapter plug or the female jack in the computer, but they're locked together now.

I have previously read review comments (on these HDMI/display port adapter plugs) mentioning this jamming happening on more than a couple occasions, but I don't recall any resolutions being mentioned except to break off (and destroy) the plug and possibly damage the display port as well. I called Lenovo tech support but they said I'd have to mail the computer to them to get it fixed. I'd prefer avoiding that if possible even though my warranty is still in effect and it would be of no cost to me.....just time lost without a computer.

I'd greatly appreciate hearing from anyone who may be aware of how to resolve this problem (and also how to avoid it happening again) without doing damage to either the plug or especially the computer display port.

Thanks for your consideration in any case....

Preferred Solution: Solved: HDMI adapter plug stuck in Lenovo T420 display port

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solved: HDMI adapter plug stuck in Lenovo T420 display port

Read other 8 answers

My ThinkPad laptop computer does not have an HDMI port, so in order to connect my computer to my HDTV I use an adapter plug which accepts an HDMI cable male plug (from my TV) and then plugs into my a/v display port. I've gone thru a few of these adapters because for some reason they tend to develop connection problems, like loss of the audio portion, or whatever. The current plug is shorter than my previous ones and less likely to get bent, but all of a sudden I've lost the audio transfer again and when I went to unplug and replug the adapter to make sure the connection was secure I found it was very hot. I don't recall it ever being that hot before....some heat, yes, but this was very hot. Not a good sigh....eh?

When this same audio loss has occurred in the past, unplugging and replugging the adapter has worked, turning the TV off and back on again has solved the problem on some occasions, other times it took restarting the computer. And then on some occasions the loss of TV audio was due to my receiver input setting getting accidently altered (I run my TV audio thru my receiver and into a Dolby surround sound speaker system). None of these remedies have worked this time however.

In this case I'm more concerned about the overheating issue than my loss of audio transfer. Can anyone with good technical knowledge comment on this high heat matter....should I trash this plug immediately?....can damage be done here with an overheating plug, or is some heat to... Read more

A:Overheated Display Port to HDMI Adapter/Converter

Read other 11 answers

Hey everyone,

PC Info:
Windows 10 Genuine
Intel i7 4790k
NVidia GTX 980ti
8GB RAM 1600
128GB SSD Boot
480GB SSD for games
1TB HDD @7200rpm for movies

I recently purchased a Display port to HDMI adapter for my PC. I did this because my TV (SONY XBR55X930D) displays 4k HDR and I want to take advantage of its ENHANCED HDMI setting. Now, when I hook the Display port end of this adapter into the 980ti and then plug the HDMI into the adapter for my TV I get video and support for ENHANCED HDMI, however, I receive no audio output whatsoever. I'll run DOOM 2016 I get video @4k but nothing for audio. Can't hear a thing whether its a movie, streaming audio through SoundCloud...nothing. I'm told that there should be support for audio with these adapters.

Is this not the case? Am I missing a setting?

I've done some research but am having difficulty finding a solution.

I am using HDMI 2.0a cables that support HDCP 2.2.

This is the adapter I purchased:


Thank you for reading and I look forward to reading your replies/tips and answering any questions.

Read other answers

I have 10 pcs Lenovo M92p, each of which is on a projector via display / hdmi cable.I do not get the sound out of the hdmi cable that I need.I can download a Lenovo driver that works after a restart but only works until I restart.What can I do ??? The drivers I'm installing are for the clip set ( Win10 pro 64Bit

Read other answers

ok so heres my question i need to know if this setup will work for me...i just bought my ps3 and i dont wanna buy a tv becouse my room is already crouded with things so i want to try to hook up my ps3 to my moniter...

i already have an hdmi cable..but my moniter is not dvi its VGA(blue)...i cant seen to find an adapter that is withing my price range $10-$35... i have to adapters one is DVI(male) to VGA(female) and i have another adapter a DVI(male)to hdmi(female)

so what kind of adapter should i buy in order for this to work .........or if its even posible..meaning if my moniter will support this??
my moniter is a IBM Lenovo ThinkVision L171
so plz let me now..if i could it will be perfect..lol

iv done some searching and would it work if i buy this VGA(male)to DVI(female) and connect it to the adapter that i already have( DVI(male)toHDMI), then hook my HDMI cable to that then the other end to my ps3....??????????????

A:Solved: HDMI To Display Port

Afraid adapters aren't going to work.
SVGA outputs an analog signal.
HDMI is digital.
You would need a signal converter and those aren't very cheap.

Read other 1 answers

hi could someone possibly help me i have a toshiba satellite pro L100 laptop it is an old laptop and does not have a hdmi slot i have read many conflicting reports that a display port to hdmi cable would make it possible for me to connect my laptop to my tv but i am not even sure if my computer has a display port or if the cable would carry picture and sound i have included a link to the cable i am talking about could anyone tell me if this would work on my laptop thanks in advance x


A:Solved: display port to hdmi

Read other 6 answers

I would like to first say thank you for any assistance that can be provided.I have a refurbished T420 Business Class that I have recently purchased.  It has the Display Port and I use an adapter to go from it to HDMI.  I use a projector during one class I instruct and a television during the other.Connecting the HDMI cable to the adapter there seems to be some issues.  The screen resolution changes on the notebook but nothing automatically displays through the projector or the television.  Using the function+F8 does nothing; however, the Windows Key+P will bring up the options but they do not seem to be configured properly.  No matter which one I pick I cannot get a dual display on the monitor and the output device.  Every notebook I?ve had in recent years automatically picked up on the display and went to the dual mode.  I ordered this one with the NVIDA NVS4200M Graphics Card and I?m beginning to think I screwed up.  I have updated the driver and still no better results.System- Windows 10 Pro 64-bitI5-2520M CPU @ 2.50GHz8GB RamIntel(R) HD Graphics 3000Driver Date 5/27/2015Driver Version NVS4200MDriver Date 10/04/16Driver Version 369.49 

Read other answers

Hi I am new to this community, so I would like to applogise if I mist a simillar subject (I did check some but non resolved my problem). I have a thinkpad t420, I bought a used one. It worked great, and I bought it from a friend, that I trust. I installed a ssd drive, was usnig Linux, and everything worked for one month. But then I bought a HDD caddy, and replaced the CD rom. After that my thinkpad worked for a day (although it didnt recognize the second HDD). The next day I tried searching BIOS for some settings, and after restarting my laptop it was stuck on Lenovo splash screen, rebooting in a loop. I tried:- removing and replacing the caddy with the CD rom,- replacing my SSD drive,- replacing RAM (both slots),- reseting BIOS,- running a diagnostic CD (but it will not boot, neither can I boot from an USB) My google search showed that it could bi a problem with one of the USB pins inside of one of the ports (short circuit or something like that), but I could not finde any damage. So I am thinkig that the motherboard could be damaged, but I can access BIOS, but that is the only thing I can do with it. I would be wery thenkful for any advice or help, before I go to an official Lenovo service for help. Thnak you! Z.


Go to Solution.

A:T420 stuck on Lenovo splash screen

Hi Zjaz123456,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with not booting to OS on your ThinkPad T420.
Is both HDD &SSD detecting in BIOS?
Check with removing CMOS battery, make sure you have disconnected the system from AC adapter and battery is removed.
Remove both the drive & battery from the system, disconnect the power adapter. Press and hold the power button for 15 to 20 sec perform this step for 2 to 3 times and then connect only the drive which is having OS installed in it. Use only power adapter to switch ON the system.
Hope this helps. Do post us back for further assistance!
Best regards,
Hemanth Kumar

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers

I'm using a Dell U3415W monitor. My video card is AMD Radeon RX480. The monitor is connected via DisplayPort to my computer. The monitor is connected via HDMI to my work laptop. When I want to switch over to HDMI, it acts as if I shut off the monitor on the Displayport shifting everything over to my secondary monitor. It causes no problem, but drives me nuts because when I switch back over to DIsplayPort, I have to move my open programs around again. Is there any simple way to make this stop? If I don't use DisplayPort, and instead use HDMI/DVI combination, the behavior described does not happen. I'm guessing that is just the way it is, but I'm hoping there is an easy way to make it stop.

Read other answers

Windows 7 EnterpriseSystem does not see or react to external display when connectedNothing displays when connectedExternal display says nothing connectedTried multiple dongles - same results
Other system that include a VGA connector work just fine to same external display.

Read other answers

I arose last morning to find my display upside down 180 degees from normal ..I use a hdmi cable to display my desktop onto my big screen tv. When I disconnect the hdmi, every thing returns. I plug the cable in its turn upside down.. By the way for about a year the lower portion of my display was distorted. Something reset itself and I don’t have that problem anymore. But now I’m unable to use my big screen, thru my hdmi cable without it flipping both the laptop and tv display It appears to be an issue with my lap top hdmi port,as I tried a new cable. Please help with suggestions
Thank you in advance

A:Upside down display (180 degrees) when when hdmi cable is plug in

Press and hold
Ctrl     Alt     and press the up arrow

Read other 5 answers

Hello, I am attempting to use the mini display port outpt on the Thinkpad Yoga14 to connect to an HDMI monitor using a miniDP to HDMI adapter. I've tried two different adapters. The monitor is never recognized. However, the mini-display port will work with a miniDP to DVI or miniDP to VGA adapter cable (I verfied this at a store where there were multiple cables and monitors to use). miniDP to HDMI: does not workminiDP to DVI: worksminiDP to VGA: works Has anyone else seen this problem?

Read other answers

Hello, I have trouble obtaining the 65W Adapter for X1 Carbon Gen5/Gen6 Laptops https://www.lenovo.com/de/de/accessories-and-monitors/chargers-and-batteries/chargers/PWR-ADP-BO-Typ... It should be a EURO Plug Adapter just like Displayed on the page https://de.wikipedia.org/wiki/Eurostecker#/media/File:Euro-Flachstecker_2.jpghttps://de.wikipedia.or... So far i tried 3 different sellers, all having the correct images in their webshops but shipping the standard.One local retailer told us even, that these adapters doesnt exist and the images on the internet are wrong. Whats the mystery about these Lenovo adapters?

Read other answers

I have just purchased two new monitors that have two hdmi and a vga input but my graphics card has dvi,hdmi and display port so I have one monitor running Strait hdmi and the other one running dvi converted to hdmi but that one I'd very blurb and slightly stretched. So I was wondering if it would be better to run displayport and convert it to hdmi or get a new graphics card.

A:Dvi to hdmi or display port to hdmi

Read other 6 answers

After upgrade to Windows 10, I cannot display from my HP laptop via HDMI to my TV. This is bad since I play movies using my laptop.

Where can I find a display driver that supports Windows 10? The laptop HDMI worked with Windows 7 & 8.

Read other answers

When I plug the AC adapter/charger in to charge the battery of the notebook, it just shut downs completely ( I was working on the  notebook on battery before I plugged the charger in).  It still works perfectly on battery only. I have taken the notebook to the store where I bought if from and we have tried plugging a new charger in, but it's still shutting down. Any idea what the problem could be?

Read other answers

I have been doing a lot of research but all I find is B/S like when they were invented, royalty rights, extra pins ect. but not just some basics answers to some basic questions.

I have a video card and display both with HDMI and Display Port ability.
At the present time I'm using HDMI to HDMI.

1. Can I use HDMI and Display Port using 2 cables at the same time on the same screen and is it a advantage or disadvantage?
Please explain.

2. If I just use Display Port will it work better that just HDMI?

I don't have a Display Port to Display Port cable at this time.
I will buy one if it will make things better.

I'm not having a problem at this time. I'm just trying to get the most out of my hardware.

Asus GTX-770 Direct CU-II/OC
Asus VE278Q

A:HDMI<> Display Port

Quote: Originally Posted by Layback Bear

1. Can I use HDMI and Display Port using 2 cables at the same time on the same screen and is it a advantage or disadvantage?
Please explain.

1 monitor 1 cable

since DP and HDMI are both digital, I guess there is no advantage either way (unlike analog vs digital).

2 outputs usually means dual monitor support, although you'd have to check the manual. Dual screens is the best upgrade I've ever made, esp for my C4D work - also good for watching TV whilst surfing !

BTW although I mainly use DVI, I had to buy a HDMI lead recently to test some gear. I was surprised to see a note in the package to the effect 'warning do not hot swap this lead - power down all equipment before connecting'. Apparently there's some kinda live detecting pin that can cause probs when hot plugging.

Read other 3 answers

Dear Sir,

I would like to purchase DELL OPTIPLEX 3020 MICRO and it has only Display port. 
Actually, I want to connect it to TV. Therefore, I will use adapter to tranfer Display port to HDMI.
But I have question that
 Will the audio signal carry with HDMI or not? 
Please help me to answer 
Thanks a lot 

A:Display Port to HDMI

I don't know about the 3020 micro, but I have used DP to HDMI before and it carries the audio to the TV

Read other 4 answers

Hello, wondered is anyone could help?i have brought a HP 8470p which has a display port, i have brought an adaptor from a display port to HDMI but it doesn't seem to work. i wanted to know if that could work or if i have to change any settings. if not ill use the VGA port insted.Many thanks 

Read other answers

I've purchased a Display Port to HDMI converter, however, when I connect it to my 42" Panasonic TV I'm not getting any display (screen is blank).  My laptop "r500" acts as if it's not recognizing that it is connected.  Is there anything that I need to dowload (driver update, etc) or any settings I need to change for the Display port to work? Thanks for your help


Go to Solution.

A:Display Port to HDMI to TV

pwm91c, welcome to the forum, it would be helpful if you could post which R500 and Operating System you have, even better post the Type and Model Number this will help members to help you. If it ends in CTO please provide some details about your R500. Please do NOT post your s/n.  Thanks

Read other 9 answers

I bought 2 new monitors.
They look amazing. Ips monitors for an amazing price.

I open. I find no hdmi connection.
I check the specs. Oh. My bad. They don't mention. Grrrrr!

Anyway... I can buy a dvi to hdmi or display port to hdmi cable.

If I get one of these... Am I losing out in anyway?

If all ok... Of the 2... Which should I get? Dvi to hdmi or display port to hdmi?


Read other answers

Just purchased a new Mobo (Asus P8Z77-V Deluxe). Haven't bought the CPU. I am waithing on the new 22nm models. After taking a close look at the display outputs on the mobo I have a choice of HDMI or Display Port. None of my existing monitors have ports for that. Soooo I guess I get a new display.

What should I be looking at as far as cables and the choice between HDMI or Display Port. I am not familiar with either one. Also I am assuming the cabling is different for the two ports.

A:Display Port or HDMI

You can find adapters to allow you to use either with DVI. If your current monitor needs replacing anyway, an HDMI-native model will be cheaper than the DP version.

It can get more complicated if you have plans for multiple monitors down the road.

Read other 9 answers

Hello all, I have a H50-50 and i have 2 monitors both HDMI capable. I have tried hooking both up HDMI and only the one that is hooked up to the video card works. How can i use the computer HDMI port and how can i get it to work? do I have to use VGA? I would rather have both HDMI ports working since it is there, not sure what the purpose of having 2 if I can only use one.... Thanks in advance

A:HDMI Port - Lenovo H50-50

they are both the same exact screen too if that makes a difference. not sure if having two fo the same type means anything

Read other 1 answers

I know there are several threads but they are with different cards and they didn't solve my issue...

I bought a new MEDION AKOYA P5334E and the system arrived installed normally with win7 home edition.

I've installed on the computer the win7 enterprise edition (x64) and many drivers could not be find. I've installed nost of them, except the display adapter.
It's stuck on "standard vga graphic adapter".
I have the AMD Radeon HD7570 card but no matter what I try is not working!!!
tried to uninstall the current driver, tried to download the driver from the AMD website (when executing it - it's running but does nothing).
when executed the auto detect from AMD website, I got the message "we were unable to find your product or OS"

Will be greatful for any help!!!
Thanks a lot!!!

A:display adapter is stuck on standard vga adapter

Welcome to the Sevem Forums, Oraz.

If you still have the DVD of Windows 7 home edition and if it is also 64-bit then you might find the graphics adapter driver there which might get installed. Otherwise try installing Graphics Card AMD Radeon HD7570 in Windows XP SP3 mode.

Another option is to try installing the Graphics Card AMD Radeon HD7570 that you have downloaded in the safe mode. In case the this driver gets loaded in the safe mode then it shall install too.

Read other 1 answers

I have 2 TVs currently serving as my screens. I've lately been helping family and friends fix small issues on their computers. I've come across a few PCs that have only a VGA Display Port, while both of my screens only have HDMI ports.
I asked someone at a local parts store, if a wire that is VGA male one side and HDMI male the other, would do the job. He told me in long detail why that would never work, that I needed a signal converter to change the display signal.
Basically he said when adapting a VGA screen to a HDMI port was possible, and the reverse (HDMI screen to VGA port in pc) is not.

My question is, if I bought the cord linked below, would I have to do anything else other than just plugging it in? Or do I indeed need this converter I was told about?

Thanks in advance


A:VGA to HDMI Display Adapter

You will need a signal converter of some type. A simple wire cable with different connectors on each end will not work. A VGA output has three analog video signals. An HDMI input expects all digital signals.

Read other 1 answers


I currently found out that my TV supports 1080p.
However, it only works when HDMI is plugged in. And my card only has DVI output. And i was wondering, will the 1080p work with a DVI to HDMI adapter then?


A:Display HDMI Adapter

Yes this would..

This might help to give you an indication of what cable you could get.
Cable converts HDMI to DVI or DVI to HDMI - Cable 1080p Certified

Read other 4 answers

I recently bought a 720p Sony Bravia TV. My laptop is a ASUS M50Sseries with HD capabilities. I wanted to watch a movie from my laptop on my TV So I plugged the HDMI cord in from the laptop to the TV and it adjusted the resolution and the brightness of my laptop. (On a separate note, I couldn't get the sound to work on the TV either) So, once I got done I un plugged my laptop and it adjusted my resolution but my brightness didn't change back. I have tried to adjust both software brightness and hardware brightness. The software actually does change but not enough to matter and the hardware adjustment does nothing, up or down. HELP PLEASE!

Read other answers

Hi all, I recently bought a HP Envy desktop 750-103a but can't get the monitor to work using the HDMI ports 0 and 1? I have tried to use the playback devices to recognise it but I don't seem to be able to get anything. Could someone please assist me, I'm not sure what to do. Thanks Rick

Read other answers

Hi all, I have an Acer S7 392 ultrabook, with a water damaged HDMI port. I have successfully used the supplied display port -> VGA adaptor to connect a monitor, but I need to be using HDMI. Is it possible to get a display port -> HDMI adaptor for this ultrabook? Thanks in advance   

Read other answers

when i connect a dvi or hdmi from my gtx 780 to my acer H274HL Monitor all works fine but when i want to connect display port cable on my gtx 780 and the other side is hdmi that goes to my monitor than there is no signal at all

i am running windows 10 64 bit enterprise and all drivers are up to date also windows updates are up to date

i have tryed everything and nothing helped can some one help me

many thanks

A:display port to hdmi no signal

You may need an active adapter like this: http://www.bestbuy.com/site/insignia...&skuId=5812034

Read other 0 answers

Hi all, I have an Acer S7 392 ultrabook, with a water damaged HDMI port. I have successfully used the supplied display port -> VGA adaptor to connect a monitor, but I need to be using HDMI. Is it possible to get a display port -> HDMI adaptor for this ultrabook? Thanks in advance   

A:S7 392: HDMI output via Display Port

Noone has any idea?

Read other 1 answers

the workstation has 3x DisplayPort and nothing else. we can use a DP - HDMI cable and everything works fine. what we want to achieve is using this cable to plug into an active HDMI  extender which plugs into the back of the monitor. we have three monitors, one local to the PC which uses a passive DP to DVI converter, this works fine. the other two monitors need to be run over the extenders but we cannot get them to work. would we need an active converter to get the DP signal to HDMI because we are using an extender or is there something else that we've missed?

Read other answers

Hello, I'm in IT where I work and we have a few Lenovo P50 laptops. They are all on the same image that I've created but one in particular has the HDMI port that will just not work. I've tried the Thunderbolt firmware upgrade but in order for that to work it says that you must connect it to an external monitor through HDMI and have it displaying which it will not do. Since we've had this one it used to display just fine on HDMI but now it does not. Any ideas for getting the firmware upgraded to see if it helps?

Read other answers

Can anyone tell me how to determine what version my HDMI and Display Port is on a K450E? Thanks.
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.

Read other answers

Hello, I have recently purchased a thinkcentre m710, i had an issue with windows in the first week which lead to me restoring the pc.After setting the computer back up again i am having an issue with no audio being played through the hdmi or the display port connections out of the back of the pc. the internal speakers work fine but are too quiet to hear for what i want to use it for. I have triend installing the audio and graphics drivers again but no luck. If there is anything i can try please let me know  (when i connect the speakers through the audio jack in the front of the pc sound works as expected, just doesnt seem to work through any display adapter.)image 1: device managerImage 2: device manager with hidden devices shown image 3: sound manager Thanks in advance  

Read other answers

Hi,I have a Zbook G3 which has and HDMI port to connect to an external display. The monitors I have are EliteDisplay E241i which have display port connectors (as well as RGA and DVI, but I'd rather not use those). Can you please point me in the direction of a good connector that will allow me to display my Zbook on the above monitors?Thanks in advance,Phil

A:HDMI (laptop) to Display Port (Monitor)

Hi, Except for VGA, from HDMI to DisplayPort or DVI is digital signals and you should get same result on your current monitor. Any standard HDMI to DVI or HDMI to DP cable will do the job. Regards.  

Read other 1 answers

I have ThinkPad W540 Win 10. When I connect my new Samsung TV through Mini Display Port, there's no sound.How do I fix that?

A:Display port to HDMI does not produce any audio wh...

I have a Samsung TV with a Thinkpad T430 with the same problem. My solution is to plug the cable in-and-out several times, and just press some volumebuttons on the laptop, it works in 95% cases.

Read other 7 answers

My display port to HDMI Converter is not working...I am not getting display of my Notebook on my TV/LCD...I have HP Elite Book 8470p with Windows 10 (32-bit) and display adapter AMD Radeon HD 7570M...All drivers are up to date...

Read other answers

Hello,  I am looking for a cheap/resonably priced USB-C to HDMI adapter for the Yoga 920 series that works well. Does anyone have any reommendations? I've looked for some on Amazon but can't seem to find any good ones.  Thanks!

Read other answers

I try to connect my x260 to TV by HDMI but the TV doesn't recieve a signalI have installed de Intel Drive:

Read other answers

Good day I am using the ThinkCentre M910s and would like to use a projector from VGA and the local screen on display port. However, both display ports are not giving any signal to the monitor. I have tried another monitor and a different cable with no luck. The computer does not Auto detect the monitor as well. Plaease assist with any solutions or ideas you might have to resolve this. Much appreciated.  

Read other answers

Hi, I just tried to connect my macbook pro (early 2015)with EliteDisplay E240 (as an external monitor) using 'Mini display (Mac) port to HDMI (E240)'. However, the monitor or macbook do not show any reponses. Do I have to install a specific driver on my mac for this issue?

Read other answers

New laptop. Good HDMI cable working fine. Sony Bravia TV uses the HDMI port too. I try to use a Display Port to HDMI converter from E-Bay and what happens is the image on TV flashes at 1 sec intervals.  The E-Bay seller is willing for refund as he is sure it worked with WIN 8 OS. IS there any patch I can try in the laptop or alternately should return the adaptor to E-Bay and buy one from HP ??

A:Display Port to HDMI does not work on Elite Pro 9480M ( WIN ...

Hi, Have you found the anwers for this problem? Im having the same issue with my machine. Please let me know Thank you Kind RegardsKarin

Read other 1 answers

Hello, I am attempting to use the mini display port outpt on the Thinkpad Yoga14 to connect to an HDMI monitor using a miniDP to HDMI adapter. I've tried two different adapters. The monitor is never recognized. However, the mini-display port will work with a miniDP to DVI or miniDP to VGA adapter cable (I verfied this at a store where there were multiple cables and monitors to use).
miniDP to HDMI: does not work
miniDP to DVI: works
miniDP to VGA: works
Has anyone else seen this problem?
Moderator comment: Model added to subject for clarity.

Read other answers

Hello,I have a refurbished T420 running Windows 10 Pro 64-Bit.  When connecting a projector via the "Display Port" using an HDMI adapter, I cannot duplicate the display.  It allows to extend the display but I like to have the image on my PC too and it doesn't do that.  Also, when extended it doesn't allow me to run operations on the projection screen. I have read aa few tips on reseting the video portion of the BIOS and I have checked, it is set on the NVDIA driver, the computer also has the Intel video driver.  I am using  MS PowerPoint 2010. This is very frustrating any help appreciated.

Read other answers

 ERunning Cad on HP Probook  - USB/VGA/HDMI + Externalk Screen ZR2740 TFT  Display port, Dual  DVI & Display port . Connections issues to external monitor in terms of resolutio really poor or Doesnt recognise monitor is attatcheddependant up which adapter cable is tried.  No Matter what cables are tried the connectivity is Really poor Quality or wont connect at all  (Need 1080P ) or The only combination not tried so far is VGA to Display port. So need to get 1080p From the Laptop to the screen. Both the scren and monitor are working sperately Thanks

Read other answers