Over 1 million tech questions and answers.

Random BSOD over past 6 months. Error 0x000000d1 ntoskrnl.exe+74ec0

Q: Random BSOD over past 6 months. Error 0x000000d1 ntoskrnl.exe+74ec0

Hello all,

Over the past 6 months or so I have been getting random BSODs with no obvious symptoms of what is causing them.

They started happening last September after I got back from the Summer. To begin with I tried to diagnose the problem following various guides to try and work out what could be causing them. I did the following:
Memtest
Reg check
Driver Verifier
Updated Drivers
Checked for any physical damage on hardware
Tried restoring

No matter what I did I could not either fix the problem or find the cause of the problem. The main reason for this was the "ntoskrnl.exe+XXXXX" would appear each time on each crash, and searching online I could not find a definitive reason or answer to the crashes.

So I decided in the meantime to live with the possible chance that I would BSOD every now and then. For the most part this was fine as they became less frequent.

Then came today. I've had 3 BSOD in one day and now its starting to irritate me. Knowing that my previous efforts to try and find a solution were to no results, I just don't know what to do. I'm getting the point that I might just rip out all my hardware and start fresh, but that won't be for another 3 months or so.

So here are the .dmps from September till now. Looking at them in BlueScreenView the Caused Driver and Address are all different, there are some common patterns such as the "Qualcomm Atheros Driver" I did update this but ended up making the problem worse, as it made my Ethernet cut out completely. Therefore I rolled back the driver.

If anyone has any ideas or can diagnose the problem better that would be grand.

My last thoughts are to what the problem might be could be involving my antivirus - BullGuard. To my memory that was the last Program I installed before I went away for the summer. Since switching to BullGuard I have noticed a lot more problems, but that could just be coincidence.
Attachment 351194

RELEVANCY SCORE 200
Preferred Solution: Random BSOD over past 6 months. Error 0x000000d1 ntoskrnl.exe+74ec0

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Random BSOD over past 6 months. Error 0x000000d1 ntoskrnl.exe+74ec0

Update Atheros LAN driver from http://www.gigabyte.in/products/prod...px?pid=4144#dl

Code:
BugCheck D1, {28, 2, 0, fffff880018fc360}

*** WARNING: Unable to verify timestamp for L1C62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for L1C62x64.sys
Probably caused by : L1C62x64.sys ( L1C62x64+6a5f )

Followup: MachineOwner
---------

Code:
Image name: L1C62x64.sys
Timestamp: Wed Apr 25 10:37:17 2012 (4F978685)
One more thing is there .... Agnitum Firewall. I dont know what is it, but as it is contributing to the BOSDs, it should be uninstalled. Probably it is branded as Outpost.

Code:
fffff880`03319e68 fffff880`04d84738Unable to load image \SystemRoot\system32\DRIVERS\afwcore.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for afwcore.sys
*** ERROR: Module load completed but symbols could not be loaded for afwcore.sys
afwcore+0x59738

Code:
fffff880`03319d48 fffff880`04d1d000Unable to load image \SystemRoot\system32\DRIVERS\afw.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
afw
Let us know the situation after doing these two.

Read other 3 answers
RELEVANCY SCORE 118

Hey guys so I've been getting some random BSOD errors every few days or so. I usually leave my computer on when I am at work or sleep and either when I come home or wake up my computer is off. So I turn it on and it says that the computer didn't shut down properly when I start up. I downloaded the BlueScreenView and noticed I've had some BSOD three times within 10 days. One was a PAGE_FAULT_IN_NONPAGED_AREA error which I believe was a RAM problem (i bought new RAM and installed it plus OCed it to 2133, but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again), but after that I've gotten two IRQL_NOT_LESS_OR_EQUAL errors related to ntoskrnl.exe. I did some research online and from what I read it could be a number of problems. I'm just not sure where to start and could really use some guidance and advice. I uploaded my dmp files for anyone who knows how to look at these.

Thank in advance.

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWA... Read more

Read other 9 answers
RELEVANCY SCORE 106.4

BSOD random, probably under heavy load situations. I dont know how to do.


DM log collector file attached

many thanks

A:BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0

Hi berdini.


Code:
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results.
____________________________________

Code:
BugCheck F7, {fffff8800a01ff08, f8800125d135, ffff077ffeda2eca, 0}

Probably caused by : Ntfs.sys ( Ntfs!_report_gsfailure+26 )

Followup: MachineOwner
---------

Read other 2 answers
RELEVANCY SCORE 95.6

Hi,

sorry, not sure what I am doing to generate this error.

I have recently had problems where the network connection fails and I cannot connect to any sites.

I cannot bring up the task manager and when I try to restart the system just freezes. I can close my open programs and save.
This has happened maybe twice in the last week, but does not always result in the BSOD so may not be related at all!

I have attached the system info dump - but i removed hosts - i develop on this PC and I some of the sites are under non-disclosure agreements.
If hosts is really required, let me know and i will remove the sensitive sites and post up.

System install is reasonable fresh [replaced the C drive just before christmas] and the updates should be applied.

thank you for any help offered,
Ice70

A:BSOD: ntoskrnl.exe+74ec0: error 0x000000c5 [DRIVER_CORRUPTED_EXPOOL]

Hello ice70, welcome to the Forums. I will see if I can help you.

First your 2 dump files:
Both blame the same thing


Code:
avgntflt
start end module name
fffff880`09800000 fffff880`09824000 avgntflt T (no symbols)
Loaded symbol image file: avgntflt.sys
Image path: avgntflt.sys
Image name: avgntflt.sys
Timestamp: Fri Jul 11 10:46:47 2014 (53C006E7)
CheckSum: 00026B8A
ImageSize: 00024000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
and


Code:
fffff880`11523878 fffff880`0a75f206Unable to load image avgntflt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgntflt.sys
*** ERROR: Module load completed but symbols could not be loaded for avgntflt.sys
avgntflt+0x5206
Both are your Avira Anti Virus. I would suggest uninstalling Avira and use the Avira removal tool Avira AntiVir Removal Tool - Download Replace it with Microsoft Security Essentials (Microsoft Security Essentials - Microsoft Windows).

I also noticed quite a few references to I/O procedures and NTFS file system, which I am sure you know is the file system Windows uses. Those usually indicate a hard drive or file system problem. You have a Samsung EVO SSD. Have you installed the Performance Restoration Software for it? They had a problem with them and released a firmware update that fixes it. It's about half way down the page Samsung SSD Downloads | Samsung SSD

I would also like ... Read more

Read other 9 answers
RELEVANCY SCORE 95.6

I have a Lenovo Z570 (i5-2450m + 6GB ram + NVidia gt520m) + Windows 7 Ultimate

I get BSOD when I try to watch a youtube video in Firefox.

I have to say that this laptop has a physical switch to turn on and of Nvidia. Otherwise it uses Intel HD Grapics.
During the BSOD Nvidia was disabled.

I tried to install the original driver for HD Grapics but I still got BSOD.


Now I turned on Nvidia and in Nvidia Control Panel I set Firefox to work with the High Performance Graphics Device.
Since then everything is fine.

But if I always use Nvidia the battery won't last long. So I want to use HD Graphics without BSOD.

I uploaded the SF Diagnostic Tool Results.
Can someone figure out the cause for the BSOD?

(I read other posts with similar error. I've never had any other antivirus soft, beside ESET Smart Security)

A:BSOD STOP: ntoskrnl.exe+74ec0: error 0x0000007F

How did you activate your copy of windows?

Read other 2 answers
RELEVANCY SCORE 94.8

Hello

Several months ago I started getting seemingly random BSODs occasionally. However after attempting to find the cause on my own for a few weeks, they seemed to stop (I was updating drivers and poking around at trying to identify if it was a hardware issue). More recently (approximately a month or so ago) the BSODs started again. I honestly can't think what may have been changed or installed on the system to cause this.

I also tried a memory test and this didn't seem to reveal anything.

I have attached the dump files along with sys information any help would be appreciated.

A:BSOD randomly occurs - error 0x0000000a - ntoskrnl.exe+74ec0

Code:
BugCheck A, {7, 2, 1, fffff80003c7b343}

Probably caused by : hardware ( nt!KiDeferredReadyThread+223 )

Followup: MachineOwner
---------
Hi James.

Update the display driver to the latest. Drivers - Download NVIDIA Drivers

Then opt for some basic hardware tests.

► Stress test the Graphics Card using Furmark. Video Card - Stress Test with Furmark
Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any artifacts or crashes during the test.

► Stress test the CPU. Hardware - Stress Test With Prime95
It saves the result as a .txt file in the prime95's folder. Upload the file for us.

► Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

► Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not. eXtreme Power Supply Calculator - The only power supply calculator trusted by PSU manufacturers and computer enthusiasts
Also let us know the wattage of the PSU that you use.

► Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your Syst... Read more

Read other 2 answers
RELEVANCY SCORE 90.4

Hey everybody,
I've been getting system crashes and restarts for the past two months. It seems to be completely random and I never use any programs that are too intensive - at most photoshop. In the first day it happened, it restarted 5 times within half an hour. This was helped by me doing a system restore. Still had the problem but it was around once a day. After talking to HP support a few days ago and doing that the guy told me to do, it got waaay worse and I restored it again. It's still worse than before but slightly better.
Anyway, I have no idea what I should do. Please help!

HP p6330f refurb
Windows 7 x64 OEM,
Intel Core i3 530, 2.93 Ghz
1TB SATA HD, 6GB RAM
age - about 3 months.

Attached is the BSOD .rar and the blue screen error

A:random BSOD, restarts for the past 2 months

I suspect ZoneAlarm is the cause here. Please remove it with with this tool: http://download.zonealarm.com/bin/fr...cpes_clean.exe

Reset the Windows Firewall. Open an elevated command prompt and enter netsh advfirewall reset.
Code:
Event[13900]:
Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-09-20T07:23:58.000
Event ID: 1001
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Project-Orion
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000006f8, 0xfffff80002a95b9f). A dump was saved in: C:\Windows\Minidump\092010-18049-01.dmp. Report Id: 092010-18049-01.
I believe CCleaner is deleting your memory dumps. Please disable it for now, until you determine the BSODs have stopped.

Read other 9 answers
RELEVANCY SCORE 87.2

Hello,

Recently I got a few bluescreens while playing World of Warcraft, which I thought was very weird, because all of my hardware is pretty new. Here is some info about my computer:

Intel i5 4690 3.5-3.9 GHZ
EVGA GTX 970 SSC (super superclocked - the fans are designed not to turn on until card reaches 60c)
16gb Hyper X Fury ram
1tb WD Black HDD
Windows 7 OS

At first, I noticed three bluescreens, then I used EVGA Precision X with a custom aggressive fan profile and the problem went away temporarily, but then the computer crashed later on. I'm not sure if that's relevant or not. I ran a diagnostic on my harddrive and processor, and both were fine. The RAM seems more difficult to test because it said something about usb drives, so I decied to stray away from that unless it was absolutely necessary (and then get help from someone who knows what they're doing!)

I am going to upload the dump files that were saved by bluescreenview. Any help at all would be greatly appreciated!

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

CRITICAL_OBJECT_TERMINATION BSODs (0xf4) are usually related to an issue with the hard drive.

If you have an SSD, make sure that the firmware is upgraded.

If HDD, run SeaTools for DOS, LONG test - Hard Drive (HDD) Diagnostics - Sysnative Forums

Regards. . .

jcgriff2

`

Read other 8 answers
RELEVANCY SCORE 87.2

Hi there,

Recently I've been getting BSOD while playing WoW. I'm not sure what details to give other than the dump so I'll just tell you about my computer:

Intel i5 4690 3.5-3.9 GHZ
EVGA GTX 970 SSC (super superclocked - the fans are designed not to turn on until card reaches 60c)
16gb Hyper X Fury ram
1tb WD Black HDD
Windows 7 OS

I noticed that I haven't crashed yet while EVGA Precision X is up (it has a custom aggressive fan curve I made). Maybe this has to do with the fact that it replaces fan drivers, or something? I don't know. I'm pretty clueless as to what's going on because all these parts are pretty new and it only recently started, but it's crashed three times today. Here are the dumps.
Any help you guys can give would be greatly greatly appreciated. Thanks a ton!
 

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

Any ideas? It happened again while using EVGA Precision.
 

Read other 1 answers
RELEVANCY SCORE 86

Hello, 
 
As title says I've been suffering with BSOD for a few months now and although it isn't consistent its still very annoying!
 
I've tested my RAM memory with memtest86 and it found no errors after a number of passes I've also tested my HDD and that also seems to be fine, however i have just installed HW Monitor to check my temps and the CPU cores seem to be peaking at about 60 degrees celsius  (140 degrees fahrenheit) so I'm not sure if that's considered very high or not?
 
Anyway here are the results from blue screen view 
 
021215-37315-01.dmp
12/02/2015 06:45:09 PM
IRQL_NOT_LESS_OR_EQUAL
0x0000000a
00000000`
00000000
00000000`
00000002
00000000`
00000001
fffff800`030e10cf
ntoskrnl.exe
ntoskrnl.exe+74ec0
NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.18717 (win7sp1_gdr.150113-1808) x64 ntoskrnl.exe+74ec0 C:\Windows\Minidump\021215-37315-01.dmp 8 15 7601 300,048 12/02/2015 06:46:43 PM 
 
Hope someone can help thanks in advance! 
 

A:BSOD ntoskrnl.exe+74ec0

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

Read other 38 answers
RELEVANCY SCORE 84.8

Hi, I'm new to this all, but am having a problem with BSOD's and it is driving me bonkers! If anyone is willing to help me out it would be greatly appreciated! here is the log info, hopefully I did this right! Thanks

A:BSOD ntoskrnl.exe+74ec0 and 76e80

Anyone?

Read other 1 answers
RELEVANCY SCORE 84.8

Hi, I am completely new here and don't know if I am at the right place, feel free to correct or move me if I am not. Also English is not my native language, however, I prefer to discuss computer problems in English as it is much easier to find additional information. I will try to express myself as adequately as I can.

So, for the past 3 weeks I have been getting BSODs at completely irregular and random intervals, sometimes none for 5 days, sometimes 4 in 2 hours, and I have officially ran out of ideas what to do.

It all started 1 day after I got a new monitor, though I have no idea whether that is a coincidence or the monitor is to blame. The first one was a bad pool header, the second memory management, by now I have had at least 6 different ones, but you can see all in the crashdump files which I've zipped and linked at the end.
Anyway, since I'm not lazy, I tried to fix it. And boy I tried... So far I have:
-Updated Driver
-Ran checkdisk
-Formatted my Hard drives and re installed windows (that helped for about 2 days..)(*note*: I did not format C manually, where I Installed Windows, as I gave it the command to format it himself, might be an issue?)
-Updated all drivers again
-Got kaspersky Antivirus and checked everth.
-Ran windows memory test and memtest86 (0 errors)
-Changed monitor cables to be both DVI (since my Graphic card is known to give BSOD if you use both HDMI and DVI at same time)
-Updated Bios to newest
-Ran CHDSK and updated drivers...again... Read more

A:Various BSOD's, all connected to ntoskrnl.exe+74ec0

Complete this tutorial as it states is the first thing to do.

Blue Screen of Death (BSOD) Posting Instructions

Read other 5 answers
RELEVANCY SCORE 84.8

Hi, I'm having random BSOD's on my new computer build. I have tried running memtest86+ on individual sticks, then all 4 combined, ran WD Lifegaurd extended test, ran HD Tune Pro, tried a Malwarebytes scan (someone suggested and figured anything is worth a shot!) here is the mini tool file
 
MiniToolBox by Farbar  Version: 30-11-2014
Ran by Derrick (administrator) on 17-02-2015 at 20:05:59
Running from "F:\MyStuff\FMyDownloads"
Microsoft Windows 7 Professional  Service Pack 1 (X64)
Boot Mode: Normal
***************************************************************************
 
========================= Event log errors: ===============================
 
Application errors:
==================
Error: (02/17/2015 08:00:23 PM) (Source: thermald) (User: )
Description: System.NotSupportedException: Specified method is not supported.
   at Gigabyte.EnvironemntControl.CoolingDevice.Fan.FanRegulatorEx2.InitFanObjects(MotherboardHealthIdentification healthNumber)
   at Gigabyte.EnvironemntControl.CoolingDevice.Fan.FanRegulatorEx2.InitObjectsInternal(MotherboardHealthIdentification healthNumber)
   at Gigabyte.EnvironemntControl.CoolingDevice.Fan.FanControl.InitIntelObjects()
   at Gigabyte.EnvironemntControl.CoolingDevice.Fan.FanControl.InitObjects(String productName)
   at Gigabyte.EnvironemntControl.CoolingDevice.Fan.FanControl..ctor()
   at thermald.MainWindow.InitHardwareMonitorObjects()
 
Error... Read more

A:Getting BSOD ntoskrnl.exe+74ec0 and 76e80

Anyone?

Read other 7 answers
RELEVANCY SCORE 84.8

Computer crashed four times in a row with the same BSOD.

Not sure what to do.
Running Windows 7 Ultimate 64 bit.

A:Multiple BSOD ntoskrnl.exe+74ec0

The crash dumps are not pointing to anything precisely. But it is memory related. Not necessarily the physical RAM, it may be any driver too, passing bad info to the memory. Let us explore both the possibilities.

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If it does not show any error, enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.... Read more

Read other 2 answers
RELEVANCY SCORE 84.4

Since about 7 months back I've been experiencing a BSOD on my Toshiba Satellite C655D-S5529 laptop. It would happen upon logging into my account and would only stop if I booted up in safe mode. Other people use the computer too so I can't be quite sure what may have caused it but since this week it has actually booted up twice, including now, without being in safe mode and hasn't blue screened. The BOSD always returns though so I'm sure this time will be no different. I was wondering if anyone could help me resolve this issue as I would love to be able to use this laptop again. Any help is greatly appreciated.

A:BSOD for the past several months, Error 0x0000001E

Please follow fully - Blue Screen of Death (BSOD) Posting Instructions

Use the "Grab All" option.

Update your System Specifications with Speccy, and then copy this information into your System Specifications: Go to your UserCP, and then select Edit System Spec in the left pane. Copy the information from Speccy into the required fields. These System Specifications will then follow your every post.

Read other 9 answers
RELEVANCY SCORE 82

Greetings Seven Forums.
I've been encountering constant BSODs consisting of page fault in nonpaged area and attempted execute of non executable memory! I have run memtest for 24 hours without errors. Additionally, I am running on no overclocks. Chkdsk found no errors in my hard drive, a Western Digital, either. I have run malwarebytes and kaspersky without any reports either! Any assistance is greatly appreciated!
Using WinDBG, I get

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\022015-245514-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18717.amd64fre.win7sp1_gdr.150113-1808
Machine Name:
Kernel base = 0xfffff800`03860000 PsLoadedModuleList = 0xfffff800`03aa4890
Debug session time: Thu Feb 19 20:00:27.509 2015 (UTC - 6:00)
System Uptime: 0 days 0:16:55.306
Loading Kernel Symbols
...............................................................
................................................................
.........................................
Loading User Symbols
Loading unloaded module list
..................................................
**************************************... Read more

A:BSOD 0x000000FC & 0x00000050 ntoskrnl.exe (74ec0 & 76e80)+ Win32k.sys

Just got done running memtest on each stick individually; no errors were found.

Read other 9 answers
RELEVANCY SCORE 79.2

Hi there sinds a few weeks I have been getting random BSODs. Its not related to anything specific it even occurs when the pc is idle.
I dont know if its related but a month ago my screen would randomly flicker and Nvidia control panal would say that it had recovered form an unexpected error.

System specs:
Windows 64 bit Ultimate
Core i5 760
4gb RAM
Geforce 460 GTX
Asrock p55 Deluxe3
Vertex2 60gb SDD
250gb regular HDD
1tb external HDD

If you need any other information i would be happy to provide it.
If its a hardware problem i have limited warranty left.
Any help is greatly appreciated! Thanks in advance.

A:BSOD Random. error 0x000000d1

These were related to your eset. Yours is over 2 years old. I would remove and replace with MSE at least to test.

http://download.eset.com/special/ESETUninstaller.exe

Microsoft Security Essentials - Free Antivirus for Windows

Read other 1 answers
RELEVANCY SCORE 78.4

Well, I had a lot of these BSOD lately. It all started when I installed a new graphics card. On the first (in fact, was the second) start of the system, after driver installing and all that stuff, a wild BSOD appeared. I reinstalled the graphics card drivers but the BSOD keep appearing. So I thought, maybe is the RAM I had to remove when cleaning, but when I ran Memtest it showed no errors. These BSOD keep appearing and I've been tempted to set the computer on fire.

Windows Specs:

- Home Premium 64bit
- OEM
- Second install, because I formatted the HD thinking it was soft problem, this install it's about five months old.

Additional Info:

- The error is 0x000000d1 DRIVER_IRQL_NOT_LESS_OR_EQUAL
- The new graphics card is a Gigabyte GeForce 520, the old one was built in. I ran a stress test on it and it was all fine.
- BlueScreenView says something about ntoskrnl.exe
- The BSOD appear randomly. Usually when playing Football Manager 2012 or starting Firefox. With other games or programs I have less problems.
- I had more BSOD's than dumps in the zip, that's because my brother hard resets the computer when dumping (one of these days I'm going to set him on fire with the computer)
- Driver Verifier was running, but I closed it sometime ago.

PD: I'm a humble spanish man, so don't be fussy with the grammar and ortography.

A:Random BSOD, error 0x000000d1 DRIVER_IRQL...

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Kingston\BSODDmpFiles\johncasel\Windows_NT6_BSOD_jcgriff2\030112-12542-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02c15000 PsLoadedModuleList = 0xfffff800`02e5a670
Debug session time: Thu Mar 1 10:35:07.490 2012 (UTC - 7:00)
System Uptime: 0 days 9:09:43.926
Loading Kernel Symbols
...............................................................
................................................................
..................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff9805b277003, 2, 0, fff... Read more

Read other 7 answers
RELEVANCY SCORE 78.4

I've had a couple of BSODs in the past, but recently it has become a lot worse. I have tolerated it for a while, while trying to fix it by myself. I'm not that tech savvy, and I'd like some assistance. I don't have any but recent back-ups, so that is not possible.

I have attached the .dmp files as instructed. If you need more info, please let me know.

A:BSOD seemingly at random, error 0x000000d1

Hi Toap.

All your Today's BSODs are network related. Those are caused by ....

ZyXEL AG-320 IEEE 802.11a+g Wireless PCI Adapter

Code:
fffff880`09fad048 fffff880`0482d0ffUnable to load image \SystemRoot\system32\DRIVERS\AG320.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AG320.sys
*** ERROR: Module load completed but symbols could not be loaded for AG320.sys
AG320+0x2d0ff
And the driver is extremely old.

Code:
fffff880`03f84000 fffff880`03fea680 AG320 (deferred)
Image path: \SystemRoot\system32\DRIVERS\AG320.sys
Image name: AG320.sys
Timestamp: Thu Jul 20 18:16:43 2006 (44BF7B33)
CheckSum: 000712A6
ImageSize: 00066680
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try to update it from Download Library | ZyXEL

SeriousBit NetBalancer Internet traffic control and monitoring tool driver

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {0, 2, 8, 0}

*** WARNING: Unable to verify timestamp for nbdrv.sys
*** ERROR: Module load completed but sy... Read more

Read other 1 answers
RELEVANCY SCORE 78.4

This has been happening for a long time now, but I have always chose to neglect it. Several days ago, my laptop Lenovo SL500 got a BSOD:


Code:
DRIVER_IRQL_NOT_LESS_OR_EQUAL
Technical info:
STOP: 0x000000D1 (0x00000030, 0x00000002, 0x00000000, 0x90E4C8A5)
athr.sys - Address 90E4C8A5 base at 90E0A000 , DateStamp 4acea1f4
Strange thing is that this happens randomly and I really don't know why
Here is my dump file:
http://www.**************/download/e..._163142_06.zip
Thank you very much!
P/S: It's mediafire

Read other answers
RELEVANCY SCORE 78.4

Hi all,


I have been experiencing this BSOD 1 time randomly. Attached dump files zipped folder
Any other relevant information I will be gladly able to provide, let me know.

Kindly assist.
Thank you all in advance

A:Random BSOD , DRIVER_IRQL_NOT_LESS_OR_EQUAL, error 0x000000d1

You are running an Acer Product ID (PID) on a Gigabyte board.
This makes your installation counterfeit.
Troubleshooting a counterfeit installation is useless as it is not known what has been modified to your system.
A counterfeit installation contains heavily modified code which causes the system to behave in unexpected ways.
For this reason, analyzing counterfeit systems is unreliable and most analysts won't try it.

Code:
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Katon
Registered Organization:
Product ID: 00426-OEM-8992662-00006
Original Install Date: 23/01/2014, 12:56:52
System Boot Time: 30/12/2015, 19:36:12
System Manufacturer: Gigabyte Technology Co., Ltd.
I recommend to install a genuine copy of Windows.
If, after you have installed a genuine copy of Windows, you still get BSOD's we'll be happy to assist you.

Read other 2 answers
RELEVANCY SCORE 78.4

This is a new computer system and already I am getting the BSOD. I don't know why. This is happen constanly, every since I booted up my new computer. I'm am uploading the .dmp files and I can't make any heads or tails of it. Could someone please help fix my BSOD issue please?

Read other answers
RELEVANCY SCORE 77.6

Hello,

I have tried to fix this myself, even had people that work with computers look at it. It is getting quite frustrating to have these BSOD and sometimes just auto restart.

Happens when I play League of legends, Rocket league, Isaac, small random games from steam. And I noticed that ClickerHeroes.com is making it happen faster. It has been ongoing for some good months now.

Read other answers
RELEVANCY SCORE 77.6

Hello community,

Last time I've formated this computer was in April and it's been working great untill few days ago.

A few days ago, some BSOD started to appear randomly, like a few times per day.
error:
0x000000d1 (0xfffff88006f94000, 0x0000000000000002, 0x0000000000000000, 0xfffff8800507b242).

I took to a local computer store, they tested my two SSD hard drivers and my RAM memories and they were both healthy, so I'm a bit lost right now.

Attached you can find my LOG FILES.
I couldn't figure out my motherboard since it's saying '' to be filled by O.E.M'
all the info I have is: _Asus_ - 107, BIOS DATE, 07/11/13

My computer:
Microsoft Windows 7 Professional x64
Service Pack 1 Compila?o 7601
PROCESSOR : Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz, 3401 Mhz, 4 N?cleo(s), 8 Processador(es) L?gico(s)
SOUND : ASUS Xonar DG Audio Device
GRAPHIC: AMD Radeon HD 6800 series, INTER (R) HD Graphics 3000
2 Hard Drives: M4 - CT 128 M4ssd2 Ata Device + PLextor PX 128 M5 pro ATA device
Network: Realtek PCIe GBE Family controller

more info:
Karspersky anti virus
I have three monitors
Razer Deathadder + razer nostromo, HID keyboard
Thank you guys so much for you help!!

A:BSOD Random, a few times error: 0x000000d1 (0xfffff88006f94000....

Welcome to 7F.

1: Kaspersky is causing multiple issues.


Code:
fffff880`0e520618 fffff880`033af110Unable to load image \SystemRoot\system32\DRIVERS\klim6.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klim6.sys
*** ERROR: Module load completed but symbols could not be loaded for klim6.sys
klim6+0x5110

fffff880`0e520348 fffff880`0326aa67Unable to load image \SystemRoot\system32\DRIVERS\kneps.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
kneps+0x2a67
fffff880`0e520350 00000000`01000000
fffff880`0e520358 fffff880`0437b10cUnable to load image \SystemRoot\system32\DRIVERS\klflt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klflt.sys
*** ERROR: Module load completed but symbols could not be loaded for klflt.sys
klflt+0x510c
Uninstall Kaspersky and install MS Security Essentials and MalwareBytes.



   Note
Make sure you uncheck the 'Enable Free Trial' box when installing MalwareBytes.


2: BitDefender is causing issues. It's never wise to run two AV products simultaneously.


Code:
fffff880`0b214348 fffff880`01b8853aUnable to load image \??\c:\program files\common files\bitdefender\bitdefender firewall\bdfndisf6.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for bdfndisf6.sys
*** ERROR: Module load completed but symbols could not be loaded for bdfndisf6.sys
bdfndisf6+0xa53a
Uninsta... Read more

Read other 8 answers
RELEVANCY SCORE 77.6

Windows 7 Pro x64 - Full Retail
Brand new system & brand new install of OS

Asrock Extreme6 Z77 Motherboard
GSkill - Ram - 16gb total (4 sticks of 4gb)
OCZ 850w PSU
i7-3770k CPU
Nvideo GTX570 GPU
SSD OS boot drive
1TB Hard Drive

I have been recieving various BSOD over the past few days. The original BSOD error 0x000000d1 which I was getting never showed up in the minidump file. Recently I have been getting the 0x0000003B BSOD which I have attached in the minidump.

Any help or direction would be appriciated.

Thanks!

A:BSOD Error 0x000000d1 & 0x0000003B -Crashes Random

These crashes were probably caused by memory corruption/exception (Cx05) {possibly a driver.}
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+


Driver Verifier






Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you... Read more

Read other 3 answers
RELEVANCY SCORE 77.6

Computer has been running stable on Windows 7 Home Premium for about a month but just recently my computer will randomly throw a BSOD with error code 0x000000d1 caused by storport.sys driver.

I've made sure all of my drivers are up to date and have searched multiple forums but found no suggested fixes besides a hotfix for Windows Server 2003.

Thank you in advance for any help!

A:BSOD appearing at random, error 0x000000d1 - storport.sys

Hi MusedRainfall welcome to SevenForums

Have you updated your bios to the current version of 4005 along with the storage driver ?



   Note
Read your manual on how to update the BIOS

Description P9X79 BIOS 4005 1.Improve system compatibility. 2.Support new CPUsFile Size 4,28 MBytes Update 2013.05.09Download
Description Intel Rapid Storage Technology driver software V11.7.0.1030 for Windows 7/8 32bit & 64bit.(WHQL)File Size12,23 MBytes Update 2013.03.05Download

Read other 9 answers
RELEVANCY SCORE 77.6

Hello

I have been having multiple issues with Bluescreens during gaming and randomly at other times.
The most recent was the following:
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0xfffff80099289a8a, 0x0000000000000002, 0x0000000000000008, 0xfffff80099289a8a). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 041714-8517-01.

All drivers appear to be up to date and the problem has persisted through multiple versions of graphics drivers.

Thanks for your help in advance.

A:BSOD at random intervals, mainly during gaming error 0x000000d1

Welcome to the forum Anfiniti,

I'd suggest you start with memtest.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you fin... Read more

Read other 6 answers
RELEVANCY SCORE 76.8

I'm new to this whole crash analyzing thing so I'm sorry if a messed something up.

I included the .zip in the attachments.

Let me know if you need anything else.

Thanks for the help!

A:Random BSOD, 3 crashes, error 0x000000d1, 0x0000000a, and 0x0000003b

Welcome to Seven Forums.

Kaspersky is often a cause of BSOD's. Please uninstall it for the time being and keep MSE. You can install i back if it was not the cause of your BSODs. Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately: Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Help protect your PC with Microsoft Security Essentials
Malwarebytes Free


   Note
Do not start the trial version of MalwareBytes

You may also take a look at: Good & Free System Security Combination
------------------------
Reduce the start-up items, Antivirus software is basically whats required. Remove Startup Programs in Windows 7
Clean Startup in Windows 7
------------------------
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible: Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow - read here
Run Disk Check on your Hard Drive for file system errors and bad sectors on it - read here
------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Tes... Read more

Read other 1 answers
RELEVANCY SCORE 74

Hi, I've recently been experiencing quite a bit of BSOD on my computer. It doesn't seem to be triggered by a certain event like playing a game or browsing the internet. Sometimes it just BSOD's while I leave it idle on the desktop. On average it's been crashing twice a day, and it's getting pretty annoying, so any help would be appreciated .

Attachment 186440
Attachment 186441

A:BSOD Randomly through Past Week 0x000000D1

Hi.

Update Intel(R) Wireless WiFi Link 5000 Series Adapter Driver for Windows 7

http://downloadcenter.intel.com/Default.aspx

Read other 5 answers
RELEVANCY SCORE 73.6

Hello -

I've got a fairly new Velocity Micro desktop running Windows 7 64 bit that's throwing bugcheck D1's and locking up to the point that it hoses my Netgear router and I have to force-power cycle the PC. I've tried updating BIOS and drivers but they continue to occur. I'm at my wits end and not sure how to proceed. I'm attaching the SF debug file to this post and would greatly appreciate any feedback / suggestions as to how to proceed.

Thanks.

Bill

A:BSOD 0x000000D1 NTOSKRNL.EXE

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

This appears to be a Windows 7 system. As such, you should seek assistance at Windows 7 Help Forums
I provide a courtesy analysis here, but I haven't done Win7 BSOD's in a long time - so I encourage you to see assistance at Seven Forums.

Most of the memory dumps blame NEOFLTR_700_17289.SYS - a Juniper Networks driver (and you have Juniper drivers that date from 2009)
Please remove (uninstall) the Juniper networks software and test to see if that stops the BSOD's
If it does (and you wish to reinstall it anyway), please be sure to get the latest, Win7 compatible version for your system.
If it doesn't fix it, I'd next suspect a conflict between the Juniper software and your Norton.

Also, please uninstall the Western Digital software from your system. It's driver is known to cause BSOD's on some systems.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

SiWinAcc.sys Mon Nov 1 15:23:29 2004 (41868D31)
Silicon Image driver - comes with package for the SIxxxx drivers
http://www.carrona.org/drivers/driver.php?id=SiWinAcc.sys

SiRemFil.sys Wed Oct 18 18:20:39 2006 (4536A8B7)
Silicon Image ... Read more

Read other 1 answers
RELEVANCY SCORE 73.6

OS: Win 8 pro

System: x64

Originally, there was no windows in my laptop since I bought the DOS version. But the first OS that I installed was win 8 pro and I switched back to win 7 ultimate at some time and finally switched back to win 8 pro. Both are full retail version.

Age of system: 8 months

Age of installed OS : 1 month

CPU: Intel(R) Core(TM) i7-3630QM CPU @2.4GHz (Quadcore but my dxdiag says that I have 8CPUs?)

Video Card: NVIDIA GeForce GT 750M

MotherBoard: I tried with CPU-z but it says invalid in motherboard field. So I googled and found out that I can use cmd to find it. Below is some command that I type through google. Not sure which one is my motherboard model.


Power Supply: Lenovo 19.5v == 6.15A

System Manufacturer : Lenovo

Model Number: YB00192238

I've been getting BSOD since early october. I already tried to use system restore back to previous month before I got BSOD and still getting it.
I've tried to re install windows several times and still get this BSOD.
There was a time I was just freshly installed the windows and in the middle of installing drivers of my laptop and I got BSOD.
I noticed I only get BSOD if I connect to the internet, specifically while browsing or downloading. I never get BSOD while being offline.
So here I am, finally given up on how to solve this and search for help from expert.

Thanks in advance for the input.
Apologize if I happen to miss some details.

A:BSOD for the past months

UPDATE:

I've run the driver verifier and I got a bsod.
I have re attach the new dump and all other things in this post.
I will update on RAM, HDD and initial later.

Read other 4 answers
RELEVANCY SCORE 73.6

Hi, I am getting this BSOD from past 6-8 months, i switched over to win 7 from XP (in XP also i suffered same problem), few days the Win 7 had no problem but after that every time i start my comp i get at least 4-5 times BSOD n the system keeps on going to safe mode.

Kindly help me.




Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 0000008C
BCP2: 00000002
BCP3: 00000000
BCP4: 88DD3FF1
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\102012-15303-01.dmp
C:\Users\Arun\AppData\Local\Temp\WER-32385-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:Getting this BSOD from past 6 months.

Please follow the http://www.techsupportforum.com/foru...ta-452654.html to provide us with your crash reports, and we will do our best to give you troubleshooting steps to fix the crashes.

Read other 1 answers
RELEVANCY SCORE 73.6

Well Ive had the BSOD but finally after sorting out the issue & changing the RAM I had no BSOD issues for few days but this has started again & the error I get is "IRQL_NOT_LESS_OR_EQUAL", which according to me is the driver issues..!!!

Can anybody please specify me the solution..???

Some Extra INFO

System 2.5 Years old [New RAM, 15 days old]
OS installed on 1st Jan 2011 [fresh retail install]
No over clocking done
Have had no issues on LINUX

EDIT: - Changed attached flies from txt to dmp

A:BSOD for the past 8 Months

Welcome to Seven Forums.
While your at it please take the time to fill in all your system specs. here
Attachment 129940

It will be needed to fully help you.
Thanks.
Fabe

Read other 9 answers
RELEVANCY SCORE 72.8

Hey everyone.

For about a month and a half now, I've been experiencing multiple BSODs every day(as directed in the title, up to 5-10). Most of the time when they happen, it's when I'm pushing my CPU/memory really hard(I'm an audio engineer, so I work with some processor and memory-heavy applications), but it has also happened 1 or 2 times when I was only watching a video on netflix or youtube.

I don't remember making any major changes to my system around the time this started, and I've already tried running tests on my memory and both HDDs with no errors coming up. I've also been monitoring the temps of my CPU and GPUs to make sure that it isn't a heat issue, which is isn't.
I've been running my same setup for over a year now, and even before the BSODs started I was doing the same activities that I'm doing now, including pushing my CPU/memory hard at times. I've tried to fix the problem on my own for the passed couple of weeks, but I've gotten nowhere, so I'm coming to the community for help.

I downloaded a tool called BlueScreenView which lists out the information about the BSODs that I've been having, including the driver that seems to be the cause of the problem. "ntoskrnl.exe" shows up as the problem driver every time, but sometimes it's paired with another different driver that seems to be almost random(sometimes having to do with my antivirus, sometimes with my audio interface or another windows driver, etc). But I could be completely wrong about "n... Read more

A:BSOD 5-10 Times a Day, 0x000000d1 ntoskrnl.exe?

Hi Jarret525.

It seems that the cause of your BSOD's are DJM-900nexus Audio Driver

Code:
DJM-900nexus_AutoSetup DJM-900nexus_AutoSetup Running Auto Own Process c:\program files (x86)\pioneer\djm-900nexus\djm-900nexus_autosetup.exe Normal LocalSystem 0
I would recommend you uninstall this software and its drivers with free Revo uninstaller and check if the BSOD's continue.
Revo Uninstaller
Download and install Revo Uninstaller free from here: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

System Optimisers

Please remove the following software:

Code:
TuneUpUtilitiesDriver64.sys Fri May 25 16:28:19 2012
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence.

If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything.10 Tips on How to Properly Maintain Your Computer ... Read more

Read other 9 answers
RELEVANCY SCORE 72.8

Hi there!
 
So as the title suggests, I've been having multiple BSOD's over the past few months that appear to be getting more frequent. I'm not sure if they're related as some of the error codes are different while others are the same. Hopefully you guys can help me here.
 
I'm going to be posting the BlueScreenView info on each as well as providing a link to the minidump file via Mediafire.
 
 
-------------------------BSOD 1--------------------------
Date: 1/13/15
 
Bug Check String: SYSTEM_SERVICE_EXCEPTION
 
Bug Check Code: 0x0000003b
 
Parameter1: 00000000`c0000005
 
Parameter2: fffff800`02e79c60
 
Parameter3: fffff880`0b36bf90
 
Parameter4: 00000000`00000000
 
Caused by Driver: dxgmms1.sys
 
Caused by address: dxgmms1.sys+c0a1
 
Crash Address: ntoskrnl.exe+75bc0
 
Minidump link: https://www.mediafire.com/?ba7i017yp33fn40
 
-------------------------BSOD 2--------------------------
Date: 5/8/15
Bug Check String: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code: 0x000000d1
Parameter1: 0000001d`684b4562
Parameter2: 00000000`00000007
Parameter3: 00000000`00000001
Parameter4: fffff880`04bc39f7
Caused by Driver: nvlddmkm.sys
Caused by address: nvlddmkm.sys+fe9f7
Crash Address: ntoskrnl.exe+76e80
 
Minidump link: https://www.mediafire.com/?ts1m9m3668dl31f
 
 
-------------------------BSOD 3--------------------------
Date: 7/4/15
Bug Check String: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug Check ... Read more

Read other answers
RELEVANCY SCORE 72.8

Hi everyone! I've received 3 bsod the past 2 months, i don't really know where they are coming from but maybe its cause i rarely turn my Laptop off all the way. i usually put it in sleep mode. Anyways here the little windows that popped up once i turned it back on. the most recent one came when i turned my laptop on from sleep mode, maybe around 10 minutes in it just happend.Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033Additional information about the problem: BCCode: 9f BCP1: 0000000000000003 BCP2: FFFFFA80115B94E0 BCP3: FFFFF80000BA2748 BCP4: FFFFFA80111327C0 OS Version: 6_1_7601 Service Pack: 1_0 Product: 768_1Files that help describe the problem: C:\Windows\Minidump\021412-32916-01.dmp C:\Users\Eddie\AppData\Local\Temp\WER-73788-0.sysdata.xmlRead our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txtI tried going to the "files that help describe the problem" while the window was up but it wouldn't let me open them. Once i clicked check for solutions, the .xml file disappeared. The dmp is still there but it won't let me open it, it says access denied. I am the admin on this computer.Thanks for the help! off to school now.

A:BSOD out of no where 3rd time past 2 months.

Don't bother checking for solutions. Can't remember a time that has actually worked for me. I am also going to ignore the codes for the moment as they do not enjoy telling the exact issue at hand.

1. What are you doing when the BSOD pops up? You say you keep it in sleep mode, etc?

2. It is a very rare issue. Give us your computer specs (I recommend Speccy for a more thorough deluge of information).

3. Toss us a small list of your most used programs (that you actually have to open yourself) and any consistent programs such as Anti-Spyware and Anti-Virus.

4. There is a chance you do have a minor (or very sneaky) virus on your computer causing the issue. Run a thorough virus scan via Avast or maybe Avira (free-versions) and nab yourself Comodo (free again) while you are at it.

5. Finally (and last on the list) how often do you actually turn off your computer? What are your core temperatures? When was the last time you applied Thermal? Can you cook an egg on the darn thing? Let us know.

Read other 11 answers
RELEVANCY SCORE 72.8

I'm throwing in the towel.
I have received numerous BSOD's over the past 8 months or so. They reference different errors, but most are memory related. The last one (today) was saying that I was attempting to execute non-executable memory.

I have not had a lot of time to sit and fix the issue. I finally decided to come here and get help.

I am attaching the required zip files.
By the way, this happens on all 4 accounts on the computer, not just admin, etc.
The dump files are processed from my personal account, which is also the admin account.
Do I need to attach the zip files from every profile on the host?
Please help asap!

- x86 (32-bit) on 64 bit hardware
- it is the original OS
- OEM : Home Vista Premium
- What is the age of system (hardware)? roughly 4.5 years old
- What is the age of OS installation? roughtly 4.5 years old
- video card: ATI radeon HD 3600+ 1GB
- RAM: 4GB
- CPU: athlon dual core 2.5 Ghz

A:Tons of BSOD over the past several months

Adding my minidumps.

Read other 27 answers
RELEVANCY SCORE 72.8

Thats right, ive gotten BSoD 41 times in the past 5 months (Since I got my computer) Im pretty mad as it seems to happen while playing Minecraft or while web-browsing (witch are the 2 things I do most ) but it has happened right on start-up. It would be so great if someone here could help me out, and finally get this problem resolved. Thanks in advance . ~Happiness1
Questions:
? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? x64
? What was original installed OS on system? Windows 7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Full Retail Version
? Age of system (hardware) Around 5 months.
? Age of OS installation - have you re-installed the OS? 5 months (never re-installed)
? CPU: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz
? Video Card: NVIDIA GeForce 9500 GT
? MotherBoard: Board: Intel Corporation DG41WV AAE90316-102
Serial Number: BTWV104006QE
Bus Clock: 266 megahertz
BIOS: Intel Corp. WVG4110H.86A.0015.2010.1111.1718 11/11/2010
? Power Supply - brand & wattage: I dont know :/ (Cant remove it)
? System Manufacturer: Custom built
? Exact model number (if laptop, check label on bottom): Custom built

A:BSoD... 41 times in the past 5 months.

Hi -

Probable issues with RAM are a likely cause.

Run memtest86+ - http://www.techsupportforum.com/2863029-post5.html

Before you run memtest86+. . . .

- remove Daemon Tools/ Alcohol 120

- Run the Driver Verifier -- http://www.sysnative.com/0x1/Driver_Verifier.htm

I see several old drivers in the dumps. If BSODs are software related, D/V can help find the culprit.

Regards. . .

jcgriff2


`



BSOD SUMMARY

Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\091211-22245-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Mon Sep 12 15:16:32.395 2011 (GMT-4)
System Uptime: 0 days 1:18:32.112
Probably caused by : win32k.sys ( win32k!SURFACE::bDeleteSurface+3c8 )
BUGCHECK_STR: 0x1a_403
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: iexplore.exe
FAILURE_BUCKET_ID: X64_0x1a_403_win32k!SURFACE::bDeleteSurface+3c8
Bugcheck code 0000001A
Arguments 00000000`00000403 fffff680`00027b78 ba500000`a2c62867 fffff680`00007b78
BiosVersion = WVG4110H.86A.0015.2010.1111.1718
BiosReleaseDate = 11/11/2010
SystemManufacturer =
SystemProductName =
MaxSpeed: 2930
CurrentSpeed: 2926
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\091211-15428-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
... Read more

Read other 7 answers
RELEVANCY SCORE 72.8

I'm on 8.1 and it's almost always when playing World of Warcraft or sometimes just using Firefox. The most recent BSOD a minute ago was KERNEL_SECURITY_CHECK_FAILURE.

Blegh.

A:Daily-ish BSOD past few months :(

One of your dumpfiles blames Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::MarkResourcesForEviction+cf ).
Driver Description: DirectX Graphics MMS./ this is probably related to your videocards and you mentioned that the bsods mostly happens when gaming.

In your msinfo32 report i found:





<Device><![CDATA[Intel(R) HD Graphics 4600]]></Device>
<PNP_Device_ID><![CDATA[PCI\VEN_8086&DEV_0412&SUBSYS_D0001458&REV_06\3&11583659&0&10]]></PNP_Device_ID>
<Error_Code><![CDATA[This device is disabled.]]></Error_Code>



.

Why is this device disabled did you have problems with it?
How did you disabled it, through device manager or did you disabled it in your Biossettings?.
Your Logitech G710 keyboard drivers are outdated(2009), please update the latest drivers from here Support + Downloads: G710 Mechanical Gaming Keyboard - Logitech and also update the drivers(2012) for your Logitech HD Pro Webcam C910.

Please also update your Intel Watchdog Timer driver(2010), it is (probably) part of the intel mangement engine.
Check the support/driver downloadsite of your OEM model or system(mainboard) for the latest windows 8.1 driver here GIGABYTE - Motherboard - Socket 1150 - GA-Z87X-D3H (rev. 1.x).
And please also update all the other drivers to the latest version.

If theBSOD's continue, I'd suggest running Driver Verifier according to theseinstructions: Driver Verifier Se... Read more

Read other 8 answers
RELEVANCY SCORE 72.8

i've been getting these BSOD
Please help

A:BSOD for the past few months 0x0000001e

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

Read other 3 answers
RELEVANCY SCORE 72.8

I have so many Blue Screen errors on my PC I don't know what to do with myself.

I have re-installed Windows 7 Ultimate fresh.

I have been running Driver Verifier for the past 6 hours. No BSOD so far so I am thinking it isn't a driver issue.

I have ran the Seagate HD Diagnostic Test, and everything has passed.

A lot of the time these BSOD's occur when I am gaming/streaming my games.

Specs: Windows 7 Ultimate
Video Card: Nvidia 570 GTX
Processor: AMD 1090 Thuban
Hard Drive: Seagate 500 GB
Ram: 8 GB G.Skill Ripjaw

==================================================
Dump File : 021012-14523-01.dmp
Crash Time : 2/10/2012 3:07:24 AM
Bug Check String : SYSTEM_SERVICE_EXCEPTION
Bug Check Code : 0x0000003b
Parameter 1 : 00000000`c0000005
Parameter 2 : fffff880`010e83d1
Parameter 3 : fffff880`082e5fb0
Parameter 4 : 00000000`00000000
Caused By Driver : fltmgr.sys
Caused By Address : fltmgr.sys+43d1
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7cc40
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\021012-14523-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 292,144
==================================================

==================================================
Dump File : 021012-14289-01.dmp
Crash Time : 2/10/2012 2:39:23 AM
Bug Check String : UNEXPECTED_KERNEL_MODE_TRAP
Bug Check Code : 0x0000007f
Parameter 1 : 00000000`... Read more

A:Several BSOD errors for the past few months

Please follow the http://www.sevenforums.com/crashes-d...tructions.html to provide us with more detailed information about your system, crashes, and error logs.

Read other 9 answers
RELEVANCY SCORE 72

Hi,

I've been getting alot of BSOD's, Mainly when playing Crysis2 (within 2-3 minutes of playing).
I also recently got one trying to do a Computer rating (Windows experience Index)

Prior to this I was getting BSOD's after installing drivers for my USB wireless adaptor - (Netgear n600), so I changed to a Linksys PCI adapter which I thought solved the issue.....but now the blue screens are back!

BlueScreenView shows that ntoskrnl.exe seems to be the problem?...I ain't got a clue so any help is appreciated!


Windows 7 Ultimate x64 bit (retail) SP1

- What is the age of system (hardware)? - New (had PC 1 week)
- What is the age of OS installation - 1 week

Manufacturer: GIGABYTE
Processor: AMD A6-3500 APU with Radeon HD graphics 2.10GHz
RAM: 8GB
Asus Radeon 6670 installed

A:BSOD ntoskrnl.exe 0x000000d1 HELP!! (Playing Crysis2)

Anyone?

I've ran memtest86 with no errors not sure what else to do!?

Read other 4 answers
RELEVANCY SCORE 72

Been getting BSOD for the past 2 months or so.

Happens sometimes while watching a movie or when it's just idle downloading a torrent.

Please help, thanks.

I attached the zip file.

System Spec
- Windows 7 Ultimate x64
- Age of system: approx. 3 months
- Age of OS installation: approx. 3 months

A:BSOD, tcpip.sys, ntoskrnl.exe, 0x000000D1, 0x0000003B

Many of your crashes were DirectX/graphics card related. DirectX comes installed with Windows, so this may indicate Windows corruption. It may also be that you have corrupted drivers or a graphics card hardware problem.
If you are overclocking any hardware, please stop.

Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.







  
Quote: Originally Posted by H2SO4


These are all stop 0x116 VIDEO_TDR_FAILURE conditions.

It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception.

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash. As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds. If there's no response, the OS concludes that the video driver/hardware combo has truly co... Read more

Read other 7 answers
RELEVANCY SCORE 72

Hello!

I've been getting BSODs usually when playing full screen games or also just randomly.

Checked my RAM with memtest and it seems ok!

DRIVER_IRQL_NOT_LESS_OR_EQUAL
BUG CHECK CODE : 0x000000d1
PARAMETER 1 : fffff880`071ec30c
PARAMETER 2 : 00000000`00000002
PARAMETER 3 : 00000000`00000008
PARAMETER 4 : fffff880`071ec30c
driver : e22w8x64.sys
address : e22w8x64.sys+2630c

ntoskrnl.exe+5a540 is also highlighted red
Would be really appreciated if somebody could help Let me know if any other information is needed!

A:Frequent BSOD (ntoskrnl.exe & e22w8x64.sys 0x000000d1)

e22w8x64.sys is your networking driver. Try updating that first.

Then, Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum): Blue Screen of Death (BSOD) Posting Instructions Please use Option 1 as it provides Event Viewer logs.

If the BSOD recurs, please run Driver Verifier according to these instructions: Driver Verifier Settings

Read other 1 answers
RELEVANCY SCORE 72

Hello everyone,

I was hoping someone could help me out with a BSOD. I had Windows 7 on my computer for the last 14 months without a single BSOD, a couple of days ago I had a fresh install, installed all my programs, drivers, windows updates, etc, same stuff as my previous install basically. But now I am getting a BSOD ever day ever since.

Of course I first looked into a lot of other threads in this forums and already did the following things:

Checked if there were any Minidumps files, and yes there are, of every single on of them, I used BlueScreenView and even though " cause by driver" is different everytime the crash address is always "ntoskrnl.exe+75bc0".

I also used Memtest and let it run and it took approx 40 minutes before it said " Pass: 1" and I saw 0 errors.

The "Bug Check String" is always "DRIVER_IRQL_NOT_LESS_OR_EQUAL".

I Provided three minidump files and I hope someone wants to help me out to find the root cause of this problem.

Cheers Rick

A:[DAILY] BSOD - 0x000000D1 - Repetitive ntoskrnl.exe

Your logs are incomplete. Follow Blue Screen of Death (BSOD) Posting Instructions, let the tool run until it is 100% complete then upload the resulting .zip file.

Read other 3 answers
RELEVANCY SCORE 72

Like the topic title says my Windows 7 computer has been getting Blue Screens on and off for a while now.  This is a fairly recent computer that I built at the start of last year.  I don't know how much help this information would be but at the start of this year I installed a new 2TB hard drive, and made a switch from WIFI to Ethernet, and sometime after that the BSODs started happening.  I bring up the Ethernet bit because one of the BSODs happened after I accidentally knocked out the Ethernet cable.
 
I decided to stop putting it off after i got two Blue Screens within the same hour today.
 
I've attached the minidump files down below.
 
Any help would be greatly appreciated.

A:Computer experiencing BSOD on and off for the past several months

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

Read other 3 answers