Over 1 million tech questions and answers.

V310 15ikb generic monitor

Q: V310 15ikb generic monitor

Hi there I have recently purchased a V310 15IKB notebook. It is working fine, but I am unable to update monitor driver to the latest one. It is always showing "Generic PNP monitor". Driver date is quite old: 21.06.2006. Generic PnP monitorCan you pls adivise how to update it? Thank you in advance S

Read other answers
RELEVANCY SCORE 200
Preferred Solution: V310 15ikb generic monitor

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 71.6

Hi, What is a good 256G M.2 NVMe SSD good to be used on a V310-15IKB?BTW, I tried WD Black PCIe WDS256G1X0C and V310 could not detect it.

Read other answers
RELEVANCY SCORE 71.6

mrb arkada?lar leptobu yeni ald?m ancak çok yavas ag?r cal?s?yor ve hiç bir ?ey yokken bir anda dnuyor bir resmi bile çok zor ac?yor acarken siyah ekran geliyor acil yard?m

Read other answers
RELEVANCY SCORE 70.8

Hi! I installed a SSD in my laptop and replaced the ODD with a HDD/SSD caddy with a WD HDD. There were issues like the laptop couldn't recognize the 2nd drive. Then I installed the Intel RST driver and now the laptop can read/write the hdd but it just sometimes can recognize it. When it does it works fine but after reboot, it doesn't shown up in Windows. In BIOS I allways see the two drives. If I enter BIOS before start the Windows allways sees the HDD until I reboot it. The controller mode is AHCI.Any suggestions? Regards,Imre 

Read other answers
RELEVANCY SCORE 70.8

Well, since no one had replied to my previous question, i will ask again.Firstly, how many time do i have to start a new topic to get noticed?My 1month old laptop freezes constantly, i don't know what is happening, checked everything related to the updates, drivers, errors, viruses, scans and that stuff, laptop doesn't have heating issues, app crashing, slowdowns... Did the lenovo slution center scans, it is all good. I heard from the other members that replacing motherboard wont solve the problem, so dont try that, i am asking you what else can i do? i cannot even browse the internet, play YT videos,I simply dont have time to waste, reinstalled win10, updtated to the latest bios and even that wont help, so i' am assuming that my device is faulty. How am i supposed to do my job, when i have unstable laptop? I am wondering will you replay this time, and please don't tell me to run lenovo solution center, or to update drivers, or to reinstall windows for the 4th time. I've had enough of it.Looking forward to your reply,Kind regards

Read other answers
RELEVANCY SCORE 70.8

Hi, I just got a new V310-15IKB notebook and I would like to use it with Windows 8.1. I installed the system but I cannot  find the Win8.1 drivers at the download page:http://pcsupport.lenovo.com/cz/en/products/laptops-and-netbooks/lenovo-v-series-laptops/v310-15ikb/d... Suprisingly, Win7 drivers seem to be available, but there are no drivers for Win 8.1 listed. Where can I get the appropriate W8.1 drivers? So far, I have managed to get some of the things working (e.g. the wlan and camera) by intalling either the W7 or W10 drivers. However, the driver for the graphics chip seems to be troublesome. I tried installing the driver provided by Intel (https://downloadcenter.intel.com/download/26836/Graphics-Intel-Graphics-Driver-for-Windows-15-45-?v=...) but it refuses to intall and claims that minimum requirements are not met. What should be done to get around this issue?

Read other answers
RELEVANCY SCORE 70.8

I tried to replace the ODD with an online purchased HDD caddy. After installation, during boot up, it took long time to boot up and when login to windows, the second hard-disk cannot be found. What special caddy do I need? Or some thing I missed out at the bios (I did try all the order option in the bios)

Read other answers
RELEVANCY SCORE 70.8

Hi. I bought a V310-15IKB (80T3). It was easy to upgrade the parts with my old Lenovo since all I had to do was remove the screws under the battery and the lid would come out. Now I want to connect my SSD to my new laptopn but I couldn't figure out how I can remove the back lid. I removed all the screws but I can't find a handle to grab. There are tutorials on Youtube for 15IKB, but on all of them, there is another hatch for HDD, but not on my model. I am adding pictures of my computer. I'd be glad if anyone can tell me how to remove the back lid.

A:How To Upgrade SSD On V310-15IKB (80T3

Welcome to the Lenovo Community !
 
Are you removing the optical drive first if so equipped?  By removing it will allow easier removal of the base cover from the top half.  Page #32 of your model's Hardware Maintenance Manual will explain how to remove the drive.  Starting on page #35 explains the base cover removal.  Here is a link to that manual for your reference......
 
https://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/v310-14-15ikb_hmm_en.pdf
 
There is also a Lenovo Training Video for the V510.  Although it is a slightly different model, the technique for removing the base cover should be the same.  Here is a link to that video series....
 
https://www.lenovoservicetraining.com/showcase?sid=1194&key=TGVuZw==

Read other 2 answers
RELEVANCY SCORE 70.8

Good day, I am the owner of a Lenovo laptop having the following specifications: Product Code: 80T30127RIMotherboard: LNVNB161216 (U3E1)Processor: Intel Core i7-7500 uRAM Memory: 8 GB DDRAM 4 2133 MhzStorage: WDC WD10JPCX-24UE4T0 1TBSATA Type: SATA-III 6.0Gb/s I want to replace the HDD of my laptop with one of the following SSD models: 1. Samsung 850 EVO, 2.5", 500GB, SATA III- Dimensions: (W x D x H mm) 100 x 6.8 x 69.85 2. Samsung 850 PRO Basic, 2.5", 512GB, SATA III- Dimensions:  100 x 69.8 x 6.8 3. Samsung 860 EVO, 500GB, 2.5", SATA III- Dimensions:  100 x 69.85 x 6.8 Please note that I want to remove the WD 1TB HDD of my laptop by replacing it with one of the above mentioned Samsung SSD's. My questions is: The Samsung SSD's mentioned above are compatible with my laptop?  Thank you.

Read other answers
RELEVANCY SCORE 70

I recently bought a Lenovo V310-15IKB about a month ago, shortly after installing Windows 7 or Windows 10 my laptop has started getting semi random freezes. When a freeze occurs the entire system locks up, the sound makes a very short interval constant loop, and I have to preform a full reboot. It seems to happen more frequently feels like it can happen at any time. Can any one help me ?

A:Lenovo V310-15IKB Hanging Issue

Hi Nawaid,1. Does your systems have other symptoms? Such as slowing down, application crashing, etc.?2. You may try to perform a memory scan to see if there is any issue on the RAM.
https://technet.microsoft.com/en-us/library/ff700221.aspx
Peter
ThinkPad X40 | ThinkPad W520 | ThinkPad T560 | ThinkCentre E73 SFF | Yoga 11s | Yoga 3 Pro | Yoga 900 | Yoga Home 900 | Yoga Tablet 2 Pro | Miix 2 10" | IdeaPad Y460p | IdeaPad K1 | 3000 Y300 | Vibe K5 Plus
Give kudos to reward people for their assistance | Mark thread solved if the solution works | I am an active volunteer, not an Lenovo employee
=====================================
List of Sound Enhancement Thread
T520 | W520 ; Dolby ; IdeaPad Slate Tablet ; Yoga 3 Pro ; X100e ; Vibe Shot ; Yoga 900 ; P50 ; P40 Yoga | Yoga 14 | Yoga 460 ; T560 | P50s ; Vibe K5 | K5 Plus ; M0620 Speaker Mod ; Windows 10 / Windows Server 2016

Read other 2 answers
RELEVANCY SCORE 70

Two mounts ago, I bought Lenova V310 15IKB. In first week my laptop froze twice. It's freezing since I got it. Last night I went back to work for a presentation and I lost all my work because of froze. When I called with an authorized service, he told me to format all it. This is new laptop... The authorized service does not help at all. I have also written to various complaint web sites but have not found any result. No body call me or writen. I bought Lenovo for the first time with my friends' advice. I think this is the end. In my research on the Internet, many people have expressed the same problem for this series. It is defenetly this problem on this series. Please, help me for this problem... 

Read other answers
RELEVANCY SCORE 70

Greetings, Two weeks ago, i bought Lenovo V310. Great laptop for the price, But, it freezes on its own from time to time. Laptop is brand new running windows 10. I have tested it with Lenovo Solution Center and it passes all the tests. But my main concern is why the laptop is unresponsive, i've tried pressing num and caps lock button to check if they would switch off but nothing happens. This is my second lenovo laptop and i have to say the previous one G580 worked better.  I bought this V310 for web development and those things should not happen. This problem occurs on Windows 10 and Linux Ubuntu. Do you have any tips how to fix this freezing issue, i cannot rely on the faulty laptop.Thanks,Kind regards!

Read other answers
RELEVANCY SCORE 70

Good day, I am the owner of a Lenovo laptop having the following specifications: Product Code: 80T30127RIMotherboard: LNVNB161216 (U3E1)Processor: Intel Core i7-7500 uRAM Memory: 8 GB DDRAM 4 2133 MhzStorage: WDC WD10JPCX-24UE4T0 1TBSATA Type: SATA-III 6.0Gb/s I want to know what is the maximum RAM capacity that I can instal on my laptop.  Thank you

Read other answers
RELEVANCY SCORE 70

Hi everybody, I bought a new IdeaPad v310-15ikb, I have been using it for one week and I realized that fun is running all the time, although CPU usage is low (~5%) and its temperature is also ok (36°C, HWMonitor). The fun speed and noise that it does is not big but still audible, it starts quickly after switching on and never stops entirely. I installed the latest bios update yesterday, nothing changed so far. I would like to know if it is normal and I need to accept it (I don't want to return the laptop, I like it otherwise) or if there is a way how to solve it / control the fan speed. Thank everybody in advance. 

Read other answers
RELEVANCY SCORE 69.2

Hello everybody !I bought few days ago a lenovo v310-15IKB notebook, and after i installed the windows 7 64 bit, i downloaded the drivers from lenovo suport page and after i installed the driver for the display adapters, it doesn't work properly and i have the error with openGL. I update my BIOS and install another driver from the AMD site, but still doesn't work. Can you help me ? Thank you very much !


























Untitled.jpg ?333 KB

Read other answers
RELEVANCY SCORE 69.2

Hello everyone, I install Samsung 960 EVO 250 GB into my laptop (Lenovo V310 15-IKB 80T3) and it isn't appear in BIOS and Windows 10 SGL x64 (Creators Update) Disk Management menu. All possible drivers, updates and latest BIOS are installed.  Is this laptop can work with this SSD? Will new BIOS is published? Can you help me to operate this device? Thank you.  

Read other answers
RELEVANCY SCORE 69.2

My laptop has very bad screen flickering when I use the VGA output on both Windows 10 and Ubunutu.On Windows 10 I have installed the latest intel and ATI GPU drivers.  I have tested the VGA output with a lot of monitors but the problem persists. The HDMI Output quality is normal as expected, but the VGA output gives me headaches and is visible that the image is "wavey"  Is there any way to overcome this issue ?

Read other answers
RELEVANCY SCORE 69.2

Secondary hdd caddy (various type and mark) incompatible some hdd drives .My previous laptop was ideapad 110.same disk and caddy didn't work on v310( 2tb seagate st2000lm003).but my old harddrive (320 gb sata seagate) work with caddy on v310 . Why ?

Read other answers
RELEVANCY SCORE 69.2

Hello I bought a V310-15IKB Laptop (Lenovo) and after installing all the drivers still no I got No Audio using a HDMI port on tv and there are no option for HDMI in sound playback devices Can someone please help me to fix this problem?

Read other answers
RELEVANCY SCORE 68.4

Hello I received a Lenovo V310-15IKB and  I updated the  bios with the latest version released on June 12, 2017 , which I thought solves the PXE Boot problem on Intel 7th gen. Kaby lake processors( PXE-E16 error -No offeres were received). Unfortunatelly , it doesn't.Do you know when we could expect this problem to be solved on V310 ?Thank you.

Read other answers
RELEVANCY SCORE 68.4

Hello!I am interested if anyone has successfully installed M430 GPU driver in win 7 on mentioned laptop?Is this even possible? I?ve heard something about incompatibility of this hardware setup and win 7..?I was trying for days without success? in installed them from Lenovo support side, amd official side, but I always get: Windows has stopped this device because it has reported problems. (Code 43).any ideas?  Which graphic drivers am I supposed to install for this laptop?Thanks a lot!

Read other answers
RELEVANCY SCORE 68.4

I bought new V310-15IKB Laptop and I've been using it for three days. Today I turned it on like always (the battery was fully charged the day before, so without the charger connected to it) and a windows update popped out. But at the same time at the screen there was some weird message (I made a photo) So I clicked Enter and it turned on. I saw that the battery is 97% and connected the charger, but it wasn't charging at all to my surprise (it's written 'connected, not charging'). I reset the laptop and problem is still the same. When I disconnect the charger the battery is running lower (from 97% to 95% and so on), when I connect it it's not charging. It's a huge problem for me, I need laptop to work, so I asked my friend to help, but he checked the saving energy thing in lenovo companion and it's turned off, we have no idea why this problem with battery exists. I need my laptop for work, if I can't get it fixed in a few days I have to go to the shop and return the laptop and buy something else instead. I really like it, don't want to do that, anyone can help me with my problem? And sorry but English is not my first language, I tried to translate everything the best I could.

A:New V310-15IKB Laptop, battery doesn't charge after the update.

Looks like Windows Update is trying to update your BIOS. Maybe try connect device to power socket and repeat the update.

Read other 3 answers
RELEVANCY SCORE 68.4

Hi, 
 
I'm usig Lenovo V310-15IKB Laptop and just updated my bios. But according to my researches, new bios firmware causes freezing issue randomly. I want to flashback old bios but i couldn't find any file to download. Anyone can help?
Thank you.
 
Mod's Edit: Additional information added to Subject line for clarity of issue.
 













Solved!

Go to Solution.

A:V310-15IKB - Flashback Problem, need older BIOS version

Welcome to the Lenovo Community !
 
I was able to locate a download of version 2WCN33WW for your model.
 
Click here for the README file for that BIOS version
 
Click here for a direct download of version 2WCN33WW

Read other 4 answers
RELEVANCY SCORE 50

I just recieved the Ideapad 720S-15IKB and it wont detect my monitor when i try to connect it using a usb c dongle. It worked on my old laptop, so i don't think the dongle is the problem. Does anyone have a soluion? Also, are there any drivers for USB C, what are the called in the device manager? 

A:Problem detecting a second monitor on 720S-15IKB when using a USB C dongle

Registered Ielts Certificate. All our certificates are registered at the British Council database system and you will be able to verify your belts online on the British council website.Get Genuine Registered IELTS Certificate Without Attending Exam. Contact Us Now ! Real Original Certificate · TOEFL CERTIFICATES · Good Pricing visit us ielts certification authority

Read other 1 answers
RELEVANCY SCORE 50

I have a brand new IdeaPad 320 and a brand new USB-C dock (40A90090US). I did have to install the driver for the dock (no mention of that in any documentation!) and most things now appear to be working (keyboard, mouse, storage) EXCEPT for the monitor outputs. Neither the two dock DP ports (with DP-DVI adapters) nor the VGA output produce any output, and no additional monitors show up on my Multiple Displays screen (which does work when I plug the monitor into the laptop's HDMI port directly). Is the USB-C dock just incompatible with an IdeaPad 320? I was told during an online chat prior to purchase that it would work, with the exception of USB-C charging. I feel like I'm missing a driver (I tried DisplayLink but apparently that's not it either).

A:IdeaPad 320-15IKB and USB-C dock monitor outputs not working

Your laptop model is not listed as being compatible with that dock (40A90090US) per the the list of compatible systems at http://accsmartfind.lenovo.com/products/40A90090US, so that may be your problem.    Best of luck, 

Read other 1 answers
RELEVANCY SCORE 49.6

As in my subject, can the Yoga 720 (15-inch) be hooked up to a 2560x1440 @ 144Hz External Monitor? I understand that I have to get a usb-c to DisplayPort adaptor to get it to work. However, I am not sure of the DisplayPort specifications in this Thunderport 3 port of Yoga 720 as for a laptop to run 144Hz on an external monitor, it has to be at least DisplayPort 1.2.

A:Yoga 720 - 15IKB: Can it be hooked up to a 2560x1440 @ 144Hz External Monitor?

I'm not an expert with monitors, but I'd check the monitor's specs to see what kind of inputs it'll work with. I would imagine the monitor will upscale or adapt to the input signal. It'd be silly to make a monitor that wouldn't work with anything the installed base of computers can throw at it.

Read other 1 answers
RELEVANCY SCORE 49.6

Hi there, I purchased a USB Type-C portable monitor (AOC, I1601FWUX) to connect it to my Ideapad 520-15IKB (PN: 81BF,    BIOS: 6JCN24WW,    OS: Win10 x64 version 1803-last version ever). Whenever I connect the cable, the monitor turns on, displays AOC logo and then a "No Signal" error message appears on the screen. Also, a message comes up on my laptop screen saying that "Display connection might be limited" (See the attached image) I installed its driver as instructed here, updated the OS, installed the "Lenovo Vantage" app and updated the System Interface Foundation... I then tried to set the power mode to best performance (See the attached image)... It looks everything is updated and working properly but the external monitor. How can I get it to work? Cheers

A:USB-C Portable Monitor shows "No singal" error (Ideapad 520-15IKB)

Can you remove your irrelative posts from my thread? Make your own topic dude!

Read other 1 answers
RELEVANCY SCORE 49.6

Last week I bought the Lenovo Ideapad 320-15IKB. So far I am pretty satisfied, but I'm having trouble connecting it to my external monitor with a HDMI cable. I've tried multiple HDMI cables, tried the monitor with another laptop and it worked fine, I also bought a USB-C to HDMI converter and that's not working either. So I don't think it's a hardware problem. In the picture I added you can cleary see the laptop detects my external monitor (LG IPS FULLHD) as the second screen, but on the monitor I get a "no signal message". I looked at all the topics similar to mine, but haven't found a solution yet. Anyone familiar with this problem? Thanks.

Read other answers
RELEVANCY SCORE 49.6

Last week I bought the Lenovo Ideapad 320-15IKB. So far I am pretty satisfied, but I'm having trouble connecting it to my external monitor with a HDMI cable. I've tried multiple HDMI cables, tried the monitor with another laptop and it worked fine, I also bought a USB-C to HDMI converter and that's not working either. So I don't think it's a hardware problem. In the picture I added you can cleary see the laptop detects my external monitor (LG IPS FULLHD) as the second screen, but on the monitor I get a "no signal message". I looked at all the topics similar to mine, but haven't found a solution yet. Anyone familiar with this problem? Thanks. 

A:Can't connect external monitor to Ideapad 320-15IKB with HDMI cable

Hi, welcome to the forum.
 
My guessing on this are  will be:
 
1) Try the "Windows Key + P" combination, try the extend and duplicate to see if you get an image on the monitor.
2) You already tried different HDMI cables, it may be interesting to also check some other TV that  you may have arround to see if you get image. Also, if you use some apdater (DP to HDMI or other) it may be interesting to try some others.
3) Go to  the support site of the "Ideapad 320-15IKB" and update the BIOS and the Video drivers. Lenovo Vantage can also help you to have you drivers up to date.
 
After trying that, if you get no good results, maybe it is some hardware issue.
 
Regards

Read other 3 answers
RELEVANCY SCORE 48.8

I have a Lenovo ideapad 720s 15ikb 81ac. I want to connect to external independent monitor. These 2 monitor should extend my Laptop display. How can i do that? My laptop has 2 USB-C port only 1 with Thunderbolt. I tried connecting 2 usb-c to hdmi adapter only 1 monitor works. Is the Lenevo Lenevo USB-C Dock will solve my problem? 

Read other answers
RELEVANCY SCORE 48.4

Greetings all,

My ViewSonic VX2450wm-LED monitor is recognized as Generic Non-PnP Monitor. I even downloaded and attempted to install Viewsonic's "Standard_Monitor_Driver_Signed_Win7_x64". It times out at the end of installation and requests I download "Standard_Monitor_Driver_Signed" from Viewsonic website.

My display view is set at max res of 1600x1200. I am running Win7-Ultimate 64bit.

Is there any other way to get Win 7-Ultimate 64bit to recognize the monitor as VX? Any help would be greatly appreciated. I am using an NVIDIA GeForce 9300M GS 256MB card.

Thank you

A:ViewSonic VX2450wm-LED monitor is a Generic Non-PnP Monitor

If you need to know, here is how I fixed it.
First install ViewSonic's "Standard_Monitor_Driver_Signed_Win7_x64"
Go to Device Manager
Select Monitor drop down tab
Select Generic PnP Monitor
Right-Click on Generic PnP Monitor
Select option "Update Driver Software"
Select "Browse my computer for driver software"
Select "Let me pick from a list of device drivers on my computer"
Select from the models listed: Generic PnP Monitor
Select option "Have Disk..."
Select "Browse..."
Navigate to where the ViewSonic monitor drivers are stored
Example: C:\ViewSonic
Select monitor driver
Example: VX2450_SERIES
Click "Open"
Click "OK"
Select from the pop up window:
ViewSonic on the left and ViewSonic VX2450 Series on the right
Click "Finish"

Finally, you will receive the message: Windows has successfully updated your driver software.
Notice resolution is now 1680x1050

After successful install of Nvidia drivers for my laptop's "nvidia geforce 9300m gs" current version:

186.19 to new version: 260.99, the max res cannot be set to the following available resolutions:
1920x1200, 1920x1440 or 2048x1536

Enjoy!

Read other 1 answers
RELEVANCY SCORE 46.8

So Riddle me this Tech Support Guys. Our Viewsonic vx2235wm Monitor recently started acting up.

Now by acting I mean the resolution is stuck at 1280x800. Instead of the native 1680x1050
So what have I done?
•Gotten unsigned and signed updated drivers for it from viewsonic. But it should run on Generic PnP Monitor drivers (it does, I tested it on other computers)
•Gotten the newest Windows 7 32-bit drivers for the laptop's Mobile Intel 965 Express Chipset Family
•Updated the driver of the Viewsonic Monitor manually to Generic PnP and restarted to no avail
•Contacted Viewsonic customer service where they told me stuff I already knew (ie: monitors are plug and play and shouldn't need drivers)

So here's the enigma.
#1: If I plug in the monitor to another laptop or another computer, resolution is fine (using the SAME VGA cable that's connected to the ailing laptop, trying to keep things consistent after all and heretofore it should be assumed, unless stated otherwise, that we use the same cables.)
#2: If I plug in one of our other monitors to the ailing laptop, Resolution is fine and the new monitor is detected no problem.
#3: When I plug in the viewsonic monitor to the ailing laptop, Generic Non-PnP Monitor is detected and no resolution options are given.

So anyone have any ideas? I figure something is saved in Windows that's detecting the new monitor as a Generic Non-PnP Monitor and I need to change it but I don't know how. Please help

-Ev... Read more

A:PnP Monitor Detected as Generic Non-PnP Monitor

Read other 8 answers
RELEVANCY SCORE 45.2

Hi all,

This issue really bugs me, every few months it'll happen, one of my three screens (9/10 times it's the Acer), will display as a "Generic Non-PnP Monitor", with this it'll only display in 640*480 (usually 1920*1080, same as the other 2 screens).

This set up works perfectly most of the time, and has done for the last few years, but as I said it comes and goes. I've done a lot of research online and the best advice I can find is that when it happens if I unplug it all, and let the capacitors drain in the monitor and GPU then when reconnecting everything it'll work fine. I've done this before and it's not worked, I've also done it and it's worked. I've also had it in the past where it's just reverted back to how it's supposed to be mid use.

My set up:
OS: Microsoft Windows 7 Home Premium 64-bit SP1
CPU: Intel Core i7 3770 @ 3.40GHz
Motherboard: ASUSTeK COMPUTER INC. CM6330_CM6630_CM6730_CM6830
Display 1: SONY TV ([email protected])
Display 2: Samsung S24B300 ([email protected])
Display 3: Acer S240HL ([email protected]) <--- Displaying as "Generic Non-PnP Monitor ([email protected])"
GPU: AMD Radeon HD 7800 Series

I've got the latest drivers for all the hardware, I've got the latest windows updates for everything. I've tried older versions of the drivers for the GPU, no difference with the issue.
I've been to the Acer website to download a driver specifically for the monitor, but they haven't got one on there for this montior on this OS, j... Read more

A:"Generic Non-PnP Monitor" Acer S240HL Tri Monitor setup.

You can try forcing the install of the vista 64 bit driver, you pick update driver then follow the yellow steps and if you get the bottom picture if its unsigned just pick install anyway.

Good luck

Read other 8 answers
RELEVANCY SCORE 45.2

I have a HPE-500f pc hooked up to my vizio V551XVT and all that comes up is generic pnp monitor, is that the correct setting and if not how do I change it

A:What is generic pnp monitor

My 27" Hyundia LCD TV/Monitor had the same issue. The answer is yes and no. W7 will assign a generic driver to operate the monitor and it will work ......as well as it works. In my case and likely your's when I went to Hyundia's site there wasn't any specific driver support for my monitor/TV. You should go and investigate Vizio's support site and see if a specific W7 driver is listed and if so then download and install. Good luck.

Read other 7 answers
RELEVANCY SCORE 45.2

Sorry for posting another thread, but I am going to pull my hair out.... I upgraded to windows 7 and now this thing says that i have a Generic Pnp Monitor? and there is no 3d card listed in the Device Manager besides the Intell Mobile Chipset thing.... I Tried all of the older drivers and they won't let me install them, I tried to manually pick out the card from the list in the update part of Device Manager and when I went to restart the computer windows wouldn't ever open correctly, so I disabled it and now I am just stuck!

Any assistance is muchly appreciated!!!!

A:Generic PnP monitor!?

Oh and I forgot to mention I'm not sure what 3d card I have is there any way to find out? I thought it was a NVIDIA GeForce Go 7300 but now I am not positive

Read other 9 answers
RELEVANCY SCORE 45.2

I'm having a problem with my computer outputing to my tv. I have 2 hd tvs, one is the Sony Bravia KDL-42V4100 and when i connect my PC through VGA it doesn't output in a 1080p resolution. On the other tv also a Bravia and this is 720p and it works just fine. But on the bigger 1080p Bravia the highest resolution can get is 1680x1050 and is being recognized by my video card as a Generic Non-PNP Monitor. It isn't a problem with VGA because i have tried DVI/HDMI from my friend. I stretched this resolution to fit but still has black bars on the desktop and even wider ones with movies and youtube videos. I am hoping to get this problem solved soon. I would like a quick response but a detailed one is more appreciated. Thanks in advance.


Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3061 Mb
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 293033 MB, Free - 11760 MB; H: Total - 476880 MB, Free - 102742 MB;
Motherboard: MSI, Boston, 1.0,
Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled
 

A:Generic Non-PNP Monitor

You need HDMI cable for 1080p
 

Read other 1 answers
RELEVANCY SCORE 45.2

hi every body

when i go to computer management in the monitor part there is a yellow traiangle and (generic pnp monitor)
what is the solution for this problem??
my monitor is aoc 2043fs

please any one help me

Read other answers
RELEVANCY SCORE 45.2

So...like many others, my Windows 7 32bit system was working "fine" yesterday. I turned it on today to see that my 4 monitor configuation was out of order and the resolutions were all wrong. This was devastating!
I panicked! I started surfing the web for fixes, installing updated drivers, reading forum after forum only to be met with disapointment and frustration. How can this happen?! Nothing changed! My God! Yet I perservered...and heres how I "fixed" it.

First I calmed down, thought it through. The damn thing worked yesterday. So that means, the system should already have everything I need to fix the problem. Right? Right! So...

*Right-click on your desktop and select "screen resolution".
*Select the monitor in question (in my case it was monitor #4, my 32" Vizio) right click on it and select properties.
*Select the Driver tab and click update driver.
*Select "Let me pick from a list of device drivers on my computer".
*Uncheck the box "show compatable hardware"
*In standard monitor types (or your brand may be in the list) find the resolution your monitor was running (mine was 1920x1080 60Hz)
*Click next and it should install...and you may need to restart you computer, not sure.
* Last but not least, you may also need to go back and change the screen refresh rate. After it puts the new driver in, for some reason, it may be the correct resolution, but not the correct refresh rate. Change it in the monitor tab under ... Read more

A:Generic Non pnp Monitor Fix

thanks a lot!!!!
but i have another problem.
i dont have the driver tab in the monitor propreties
what can i do ????

Read other 1 answers
RELEVANCY SCORE 45.2

Hello there This is my first time ever using this forum, and I have a question which I have been trying to fix for a while now.
Sorry if I'm not that experienced because I only have been studying computing for 2 years, but anyway to the question. So about 2 days ago I plugged in my Xbox360 into my PC monitor by first removing the VGA connected to the monitor from the computer and then connected the special made Xbox360 VGA to my monitor, after I was done using it, I plugged back my PC's VGA monitor and and switched on my computer. Now this is where the trouble started because when the Windows start up animation came in I notices the resolution was to low and everything looked magnified, so I went to the screen resolution options which supposedly look like this , except of course the brand name, but mine isn'y like that, it's instead like this. Now I cannot choose the recommended screen res. but only list of resolutions which i don't know which one is good for my monitor. and I also noticed that small things such as text lost their quality and look somewhat faded a little, almost like when you turn anti-aliasing to low in a game. Anyway hope that someone helps me because it's quite frustrating for this to happen.

P.S- I'm using Windows 7 Ultimate 32-bit and a ViewSonic 20" VG2021m monitor
 

A:Non-Generic PnP Monitor?

Read other 14 answers
RELEVANCY SCORE 45.2

Hello, I recently purchased a new PC which I'm positive can run two monitors simultaneously.
I currently have a monitor connected via DVI and a monitor connected via HMDI, they both are working but it shows the same screen on both monitors. I've tried to change the resolution on my monitors to have it extend seamlessly from the first monitor to the next, but it's only coming up with one monitor selection, and it is named 'generic pvp monitor on standard vga graphics adapter'. Every time I try to change the resolution on one screen it does it for both.

Any ideas on how I should proceed to get both monitors working the way I want?

My computer specs are -

AMD A8 6600K 3.90 GHz Quad Core Processor
Radeon HD 8570D Graphics
8GB RAM

Do I just need to download some drivers or?

A:What's a Generic PnP Monitor?

have you tried a third party software yet?

something like this will help .
DisplayFusion: Multiple Monitors Made Easy! ? by Binary Fortress Software

some more info here

Five Best Tools for Managing Your Multi-Monitor Setup

Read other 5 answers
RELEVANCY SCORE 45.2

So i have this sony vaio vpceb26fg Laptop

it had a radion inbuilt video card innit which became faulty around 8 months back
i went to the service centre guys and he told since its working fine on the other default driver
i shd keep using it cuz , my problem can only get repaired if i change the motherboard which wud cost a lot like 1/4th the cost of my laptop

so i used it that way all the while . the heating problem and everything was too much
then one day i was cleaning my laptop s creen with a solution and when i switched it on i saw 2 vertical lines on right end . i knew that my screens got gone too but since it was very mild i kept on using it
and today suddenly everything gt changed

i am assuming the standard video card which it was running on before is also gone ??

is there a way to check

and yes it looks exactly like the windows xp screen used to look when u install windows without its drivers

am on windows 7 , i tried installing driver but it shows blue screen on startup so i recovered windows and tried next best possible configuration .

I just want to check is my onboard videocard gone the standard one
or it has something with screen now
or is it something else

can i like get anything done to it now am typing this from the same laptop
my desktop i snot working from many days

A:Generic non pnp monitor 640 by 480

You can try booting with Linux Mint MATE DVD/USB and see if graphics are alright.

Read other 4 answers
RELEVANCY SCORE 44.4

i have a dell all-in-one inspiron 2020, and somehow generic pnp monitor was installed on my pc...ive noticed color problems recently and tried updating drivers... could anyone help me  

Read other answers
RELEVANCY SCORE 44.4

The Generic PnP Monitor driver is flapping like there is something wrong with the monitor. It keeps trying to redisover the monitor and blanks out the screen every 30 seconds or so. Very irritating. I am running a Westinghouse LCM-22w3 22" HD monitor through a Belkin KVM Switch. This does not occur on my XP machine or my Linux server only Win7.
Warning 4/7/2009 7:30:39 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:29:03 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:28:18 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:27:55 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:27:31 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:27:31 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:24:55 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:24:54 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:24:25 PM Kernel-PnP 219 (212)...
The driver \Driver\monitor failed to load for the device DISPLAY\Default_Monitor\5&3880df1&0&UID256.
- System
- Provider
[ Name] Microsoft-Windows-Kernel-PnP
[ Guid] {9C205A39-1250-487D-ABD7-E831C6290539}
EventID 219
Version 0
Level 3
Task 212
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2009-04-08T02:30:39.568359300Z
EventRecordID 9306
Correlation
- Execution
[ ProcessID] 4
[ ThreadID] 48
Channel System
Computer swampwin-PC
- Security
[ UserID] S-1-5-18
- EventData
DriverNameLength 42
DriverName DISPLAY\Default_Monitor\5&3880df1&0&UID256
Status 3221226382
Fa... Read more

A:Generic PnP Monitor Flapping

  
Quote: Originally Posted by swampfox0712


The Generic PnP Monitor driver is flapping like there is something wrong with the monitor. It keeps trying to redisover the monitor and blanks out the screen every 30 seconds or so. Very irritating. I am running a Westinghouse LCM-22w3 22" HD monitor through a Belkin KVM Switch. This does not occur on my XP machine or my Linux server only Win7.
Warning 4/7/2009 7:30:39 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:29:03 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:28:18 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:27:55 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:27:31 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:27:31 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:24:55 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:24:54 PM Kernel-PnP 219 (212)
Warning 4/7/2009 7:24:25 PM Kernel-PnP 219 (212)...
The driver \Driver\monitor failed to load for the device DISPLAY\Default_Monitor\5&3880df1&0&UID256.
- System
- Provider
[ Name] Microsoft-Windows-Kernel-PnP
[ Guid] {9C205A39-1250-487D-ABD7-E831C6290539}
EventID 219
Version 0
Level 3
Task 212
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2009-04-08T02:30:39.568359300Z
EventRecordID 9306
Correlation
- Execution
[ ProcessID] 4
[ ThreadID] 48
Channel System
Computer swampwin-PC
- Security
[ UserID] S-1-5-18
- EventData
Driv... Read more

Read other 2 answers
RELEVANCY SCORE 44.4

I've got a USB KVM by Edimax
I've got a Vista laptop connected + an XP PC

The XP PC is giving me problems - I can't get the correct resolutions (1440 x 900) for the monitor - it's a 17 inch HannsG monitor

I've looked on the HannsG website and there are only drivers for Vista

Can I get generic monitor drivers from somewhere else (safe)?

Thanks
OM
 

A:Where can I get a generic monitor driver from?

I think the problem is with the graphic card driver not the monitor.
I have never installed any monitor driver.
 

Read other 2 answers
RELEVANCY SCORE 44.4

I am running Windows Vista 64bit I have (2) Nvidia 9800 GX2 video cards and a Asus Striker II Fomula mother board and a Veiwsonic VM2235wm monitor. No matter what I am trying I cant get my computer to find my monitor. So I can only set my resolution to 1024x768. When I start my computer it gets to the Windows Vista load screen and then it goes into hibernation mode for some reason and then I have to turn the monitor off and then turn it back on again in order to get any picture. I have tried to install multiple video card drivers and I have tried to use the drivers from the CD i got with the monitor along with the drivers from Viewsonics web page. Even when I try to manually load the drivers it still just goes right to Generic PnP Monitor. I hope someone can help me fix my problem here. Thanks

A:9800 GX2 Generic PnP Monitor Help.

Is this a new build? Did you have one GX2 and added another? What is exactly the procedure that you followed to install the drivers? Did you installed one driver, then reinstalled another? Give some specifics. I had a problem with my monitor too, and it turned out to be a damaged color profile. When I changed it, it turned out just fine.

Read other 1 answers
RELEVANCY SCORE 44.4

Hello, I recently bought a monitor that has been working perfect, the thing is that I had a VGA cable, now I had to change to DVI cable for a reason, since I changed it, I have my windows not recognizing the second monitor, saying "Generic non-PnP monitor" and has tons of resolutions, anyone know how I can make it recognize?

Imgur info here

A:Generic non-PnP monitor suddenly

Check your GPU driver control program, for AMD there is "Use EDID (Extended Display Identification Data)" in CCC. It tells your computer which monitor it is and what it's capable of.

Read other 3 answers