Over 1 million tech questions and answers.

Fingerprint sensor issue - Ubuntu 16.10

Q: Fingerprint sensor issue - Ubuntu 16.10

Hello I recently installed Ubuntu 16.10 on my HP ENVY K212ne and I want to use it as default.( my previuos OS was Win10)I will get this output with "lsusb" command in terminal : Bus 001 Device 002: ID 8087:8001 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubBus 002 Device 005: ID 0a5c:216c Broadcom Corp. BCM43142A0 Bluetooth DeviceBus 002 Device 004: ID 138a:0050 Validity Sensors, Inc. Swipe Fingerprint SensorBus 002 Device 003: ID 05c8:036e Cheng Uei Precision Industry Co., Ltd (Foxlink) WebcamBus 002 Device 002: ID 3938:1080 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubwhich means that my fingerprint sensor ID is : 138a:0050I tried to use fingerprint sensor , so I searched on the net and found two applications named "fprint" and "Fingerprint GUI" . But my sensor couldn't find in "Supported readers" :Fingerprint GUI at Launchpad & fprint at Launchpad.How can I find fingerprint sensor drivers ?I should mention that when I bought this laptop , Ubuntu was installed on it as default (but I don't know which version) .

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Fingerprint sensor issue - Ubuntu 16.10

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 80.4

I've been using Yoga 720 15 about a week and Synaptics fingerprint sensor worked well. Recently I tried to use it to log in, but there was no sign of Windows Hello working. I tried to look up in settings, but it says that Hello is not supporting on this device. Device manager, however, shows that sensor is fine, no exclamation points or something indicating a problem. I tried to update fingerprint driver, but no use Has anyone faced the same problem?

Read other answers
RELEVANCY SCORE 79.6

Windows has stopped this device because it has reported problems. (Code 43)

location : Port_#0001.Hub_#0003

Unknown USB Device (code 43)
For the past few weeks or so one of my USB controllers seem to have been malfunctioning. but it was working fine a month ago ,before that i fully recovered my notebook by pressing f11 using hp recovery manager but i lost my finger print sensor as malfunctioned then i tried to clean reinstall windows 7 home premium 64
bit , and activated again using the genuine product keys . all drivers updated but not with fingerprint reader . if i remove the ribbon cable of fingerprint device from the zif connector then i see no more this error in device manager . if i again insert the cable in to that zif connector , then after power on i see the same error in device manager .
uninstalling the Unknown Device through Device Manager does absolutely nothing if any device is plugged in to USB. Doesn't matter which device, the device itself will continue working but Windows will try (and fail) to reinstall whatever driver it thinks is missing, so the Unknown Device comes back straight away.

A:unknown device fingerprint sensor issue

Hello salluhassan, I worked in an HP call center doing support on HP laptops I have seen this work on different problems from malfunctioning keyboards, USB ports, fingerprint scanners and laptops that refuse to power on. In fact it is the first step in a lot of HP's logic flows. This does not work every time nor does it solve all issues but it's worth a shot. HP refers to this as a hard reset, remove your battery unplug your A/C so no power is going to the NB hold power button down for 30 sec reconnect and power back on.

Read other 4 answers
RELEVANCY SCORE 79.6

When I run my finger across the fingerprint sensor, the light is disabled as my finger gets close to the sensor.  Its almost as though it is detecting the change in the light.  I don't know if this is normal, but the end result is that upon swiping a finger, it does not read it and thus cannot be used.  Periodically, the light will stay on and Windows Hello will have no reaction.  Other times, ocassionally, when the finger is rolled to one side, then it flash orange and say it cannot read it. I get the impression that a USB reset is occuring.  Is there any tool to check the fingerprint sensor?  Or does anyone have any ideas?

Read other answers
RELEVANCY SCORE 78.8

I have bought a laptop Latitude E5450 with ubunto OS, i have changed it to MS Windows 7 Pro 64 bit, I can't download DigitalPersona Fingerprint Suite, so I can't use the fingerprint sensor.

what Can I Do?

Read other answers
RELEVANCY SCORE 76.4

Hi everyone,
Windows 10 updated itself to the Creators Update this week and I notice that my Fingerprint Senor will not work after sleep mode.
When I check the Device Manager it disappeared from device manager and if I choose the show hidden device it says the Synaptics VFS7552 Touch Fingerprint Sensor is disconnected.

I have updated the latest driver from Dell webpage and problem is persists. The only way to "fix" it is to reboot the Laptop and the Fingerprint Sensor will work but when it goes to sleep it will disconnect itself again.

Do anyone know how to fix this issue?
Thanks.

Regards,
Derek Tang

Read other answers
RELEVANCY SCORE 74

Hi, I'm a happy owner of a Dell E5270 and on The base plate there's a fingerprint sensor. However, when I install the recommended drivers there are no biometric devices. What is visible (in device manager) is Dell Control Vault w/o fingerprint sensor. Is it possible that there is a sensor but that The system lacks the optional fingerprint unit inside the laptop housing? There are no exclamation Marks in the device manager.
Secondly I've found the Dell DW5811E 3P10Y wwan card for the dell e5270 at a bargain price but i would like to know where to finf the cables in the housing? .

Thx!

Read other answers
RELEVANCY SCORE 73.6

I am using win 8.1 (fully updated) and used to have working fingerprint logon. Now it stopped working. Suddenly I can not use Lenovo Fingerprint Manager Pro (V 8.01.42(x64)) anymore. Whenever I try to start the application, it asks me for my Windows password, but then responds - "The device is not connected to the computer. Please insert the authentication device." OTH, in the device manager, under Biometric devices, I see Synaptics FP Sensors (WBF) (PID=0017) Also windows fingerprint sign-in option is greyed out. Any hints, what can I check?













Solved!

Go to Solution.

A:Fingerprint manager pro no longer recognizing fingerprint sensor (T440s)

Try this:
1.  reboot and then press F1 at "Lenovo" logo to enter BIOS setup
2.  Change to "Security" menu
3.  change to "Fingerprint" item
4.  Choose the option for "Reset Fingerprint Data" - what happens?
5.  Press F10 to save and exit
6.  Try to enroll fingers again - what happens?
 

Read other 9 answers
RELEVANCY SCORE 72.8

Something is weird with the fingerprint sensor. When it works, it works instantly and recognizes my fingerprint right away, no matter which part of the finger I use. The problem is that it's *constantly* forgetting my finger. It'll work fine, then I'll close my laptop and come back in a little bit and it doesn't work at all...fails three times and have to use my PIN. Once that happens it doesn't work again, at all, until I re-enroll my fingerprint at which time it works perfectly again for some time. I end up having to re-enroll once or twice a day. Lenovo Vantage pulled in a new version of the driver package today but it didn't help...the issue just happened again. Anyone know what the cause might be?

Read other answers
RELEVANCY SCORE 64.8

Hi. Help me to add one user fingerprint data to diferent OS in one laptop.So, i have - HP elitebook 8470p - Synaptics FP Sensors (WBF) (PID=003d) - two OS Win7 and win10 (i can select only one to load) - same user for both OS First i add 2 fingers in one OS, and it work.Next i try to add same 2 fingers to other, but "error - finger already regested". It's mean that theris some other user (i am , already added by other OS) who have the same fingerprints. And i can add it again.  I try several times to fix it.but no result. In the begining was different fingerprint sensor driver and HP securiti software in OSes.Then i install same to both.Make reset fingerprint sensor in bios and delete all fingerprints in hp security.But still no result... This is my curent driver and software:sp72896 Synaptics WBF Fingerprint Driversp74101 HP Client Security Manager (American, International) P.S. in other laptop i have 3 OS!!! Win7+Win7+Win7. And no troubles with fingerprints. One user for all OSes.

Read other answers
RELEVANCY SCORE 64.8

I was very kindly helped by Aca Candy recently with a blue screen problem. Unfortunately I had to have my laptop reformatted. Now for some reason I cannot use the fingerprint sensor. I try to open the program but no luck. I am running vista business, software program is ATSwpNav
and I have a Lifebook P7230.
Incidentally as the notebook is only now 2 months old I did try the supplier an internet seller called Laptops Direct in the UK, they are a total waste of space! Looks like I am on my own??
Anyone wishing to help would be most welcome
 

Read other answers
RELEVANCY SCORE 64

I have contacted with customer care many times....but no response was given . And I also visited service center chandigarh and they said that the scanner will be replaced and it'll take 4-5 days. But due to shortage of time i was not able to give them the laptop for repairing. This is in onsite warranty , so kindly replace this scanner  and do needful .
Divesh Gupta
[edited]
 

A:Fingerprint sensor not working

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.If you are unfamiliar with how the Forum's private message capability works, this post has instructions.

Read other 1 answers
RELEVANCY SCORE 64

I have a ThinkPad T460s and recently the fingerprint sensor stopped working. It would not light up at the log in screen. I removed the saved fingerprint and tried to re-add it but after it I put in my pin, it does not prompt me to input my fingerprint. It the cursor just spins. At that point I reinstalled the drivers and ran the latest windows updates. Still the same issue in addition to another. Now I also have the option to remove a fingerprint, when I click remove, it does nothing. I have updated every system driver as well as BIOS. I have removed fingerprint data from the BIOS. I have tried enabeling and disabling Windows hello from Group Policy. I tested it on a seperate user account and it is working on that account. Any help would be appriciated, I can provide further detail if needed.

Read other answers
RELEVANCY SCORE 64

Hi I used to use fingerprint basically every day and now it stopped working. Not sure if it was after any sw update because it happens automatically. Sometimes it requires computer reboot that I am forced to do but if there is no restart required I guess I have no notification that there was any sw update. I downloaded latest Fingerprint driver from lenovo site but you can see the result below. I am on Windows7 64 bit. Thank you R 











Solved!
Go to Solution.

A:Fingerprint sensor is not detected

Hi Cimenta,
 
Welcome to Lenovo Community Forums!
 
I?m sorry to hear that fingerprint reader in your Lenovo ThinkPad is not getting detected properly.
 
Could you please check whether fingerprint reader is enabled in BIOS? Also, reset the internal finger print data in BIOS and check.
 
Hope this helps! Do post back if issue persists.
 
Best regards,
Mithun.




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 64

Recently my omnipass fingerprint swipe for my passwords isnt working. the program doesnt open when i try to open it or when my computer starts. also, the button inbetween the left and right clicker on my laptop, the button that can be pressed to scroll up and down, isnt working either. These both happened after the same restart. Thanks
 

A:Omnipass Fingerprint Sensor

Also, Windows defender wont open.
I tried updating my symantec antivirus and this message came up saying something is corrupted??? :
The following Symantec products and components are installed on your computer.
> Avenge MicroDefs25 SavCorp10
> LiveUpdate
> Symantec AntiVirus Corporate Client

Initializing...
Connecting to liveupdate.symantecliveupdate.com...
Downloading catalog file (1 of 4), complete.
Opening update list
The digital signature found on the catalog file has been signed by Symantec Corporation.
Processing update list
Opening update list
Processing update list
Downloading catalog file (2 of 4), complete.
Opening update list
The digital signature found on the catalog file has been signed by Symantec Corporation.
Processing update list
Opening update list
Processing update list
Downloading catalog file (3 of 4), product up-to-date.
Downloading catalog file (4 of 4), complete.
Opening update list
The digital signature found on the catalog file has been signed by Symantec Corporation.
Processing update list
Opening update list
Processing update list

The following updates have been aborted:
> Avenge MicroDefs25 SavCorp10 has 1 aborted update(s).
Reason:
LU1847: LiveUpdate could not determine if there is an update for this product because the update list for this product is corrupted.

LiveUpdate session is complete.
 

Read other 2 answers
RELEVANCY SCORE 64

Neither the fingerprint sensor or the HP SimplePass software are working after a recent Windows 10 update. Tried updating, repairing, reinstalling both the Validity Sensor driver as well as the SimplePass software but it still does not work. Read many posts in these forums and tried various suggested solutions but none of them solved the problem.

A:Fingerprint Sensor does not work

#HPExpertDayThese should help:http://support.hp.com/us-en/document/c03718240andhttp://support.hp.com/us-en/document/c03653209Workd for Win 10 too.

Read other 1 answers
RELEVANCY SCORE 64

Hi all! I just got my 6st gen Carbon X1 - beautiful device, I'm loving it. BUT! Out of the box the fingerprint reader didn't work properly. Kept disconecting. So I updated WIN 10 and installed all the drivers plus the BIOS. Now, under the Device Manager, it just says "This device cannot start (Code 10)". I tried reinstalling the drivers, manually and through Vantage - no go. I keep reading that this turns up as a problem sometimes, but most people solved it through driver reinstalls. Doesn't work here. So, before I return it - any ideas? Thanks.

Read other answers
RELEVANCY SCORE 64

I had a lenevo x240 model withoit fingerprint. I bought a new x250 palmrest with fingerprint sensor and installed. I have all the trackpad, keyboard working. I cannot get the fingerprint sensor working. I have investigated different threads like   http://diy.mironto.sk/thinkpad-x240-replacing-touchpad-and-keyboard/ .  I have installed drivers for the fingerprint sensor but i cann't get the fingerprint sensor working.  Any advice  Thanks 

Read other answers
RELEVANCY SCORE 64

I have a 3 month old L460; the fingerprint sensor has been sketchy from day one - I often had to select ?alternate log in?, and then return to the fingerprint log in to get it to work.  But tonight it refuses to read the sensor at all.  And since I never actually set up a log in password, I can?t get into the machine to check drivers, etc.  Any suggestions??

Read other answers
RELEVANCY SCORE 64

So I have an HP Envy 15 j111tx.I have Windows 10(64-bit) installed on my computer, I want to log on to my computer by using the fingerprint scanner, but it won't work. I will swipe my finger and it won't even light up. I don't know what to do and I dont want to do something to make it worse.  PLEASE HELP!!!!HP Envy user

Read other answers
RELEVANCY SCORE 64

The sign in options settings are not showing an option for fingerprint set up or even the Windows Hello setup option. I have installed the validity fingerprint sensor driver but even then the problem is same.

Read other answers
RELEVANCY SCORE 64

I've been trying to figure out how to get my fingerprint sensor working but have run out of luck. I'm hoping for someone to go through it with me step by step.  Below is the problem I keep having. Everytime I swipe my finger to setup it up, it always say that.     The driver is also updated.  

Read other answers
RELEVANCY SCORE 64

Hi!Here is my first post. it's related to fingerprint sensor. Machine is a T570 "out-of-box" with Win 10 PRO. I ran MS Windows updates then Lenovo updates through Lenovo companion program.I notice after applying proposed fingerprint driver (Synaptics Metallica MOC touch FP driver - V5.2.3515.26)  sensor doesn't work anymore ... To log in I'm forced to use the PIN code or password way. Sensor no longer recognizes my finger. In fact it is the sensor itself that is no longer functional (no light). Obviously before I tried to configure the sensor again but without success ... Using the previous driver through drivers manager, everything works again (5.2.3512)Has anyone had the same problem? Thanks in advanceRegards

Read other answers
RELEVANCY SCORE 64

Hi all,I bought the laptop with Windows8 on it. At the time the login via fingerprint worked quite well, sometimes the sensor was not blinking and using it nothing appened...at the end of the day I had to use the login via password.I week ago I updated my OS to Windows 10, since then the fingerprint login is not available any more (the sensor does not blink...)..let's say it works 5% of the times.This is quite annoying. Do you have any suggestionthank you in advanceMatteo

A:After startup the fingerprint sensor is not available (does ...

humm not sure if i got it .. but if you upgraded your windows to 10 .. you need to re install the fingerprint driver i had this issue on my laptop i installed the latest driver and its working

Read other 1 answers
RELEVANCY SCORE 64

Has anyone been able to figure out how to get the fingerprint working after windows 10 upgrade on the Elitebook 8740w?

Read other answers
RELEVANCY SCORE 64

I recently refreshed my pc which led to unistalling of my fingerprint sensor of my laptop.!!! Now I am not able to find the driver for my fingerprint sensor. Any help will be highly appreciated.!!!On the uninstalled apps the information about the driver is as follows:Validity WBF DDF-Validity Sensors, Inc.-4.5.228.0

A:Fingerprint sensor for my laptop.

@R_Chauhan? System Website Driver Support Pages:HP ENVY Notebook - 15-k112tx Find the Validity Sensor Driver in CategoryDriver - Keyboard, Mouse, and Input Devices > Validity Fingerprint Sensor Drive sp72143.exe (26.0 MB) Full Information and Download:Validity Fingerprint Sensor Driver  When you see a Post that helps, inspires, provides fresh insight,or teaches you something new, click the Thumbs Up on that Post.Fixed / Answered? Click that post Accept as Solution to help others find Answers. 

Read other 1 answers
RELEVANCY SCORE 63.6

When ever i lunch my fingerprint software, it shows an error that fingerprint sensor not ditected, ensure to configure it properly. please how should i go about this???

Read other answers
RELEVANCY SCORE 63.6

HI BRO...MY LAPTOP IS ... Laptop-hp dv6 2005ax ..IT HAS FINGER SENCOR BUT IT IS NOT WORKING..I REINSTALD IY ..THOUGH IT IS NOT WORKING PLS SUGGEST ME ANY IDEA IF U HAV...WAITING FOR A REPLY...

A:Fingerprint sensor not working on laptop

  
Quote: Originally Posted by manasthehunck


HI BRO...MY LAPTOP IS ... Laptop-hp dv6 2005ax ..IT HAS FINGER SENCOR BUT IT IS NOT WORKING..I REINSTALD IY ..THOUGH IT IS NOT WORKING PLS SUGGEST ME ANY IDEA IF U HAV...WAITING FOR A REPLY...


Hello Welcome to SF,

Go over here and download the drivers for it see whether it works HP Pavilion dv6-2005ax Entertainment Notebook PC

Hope this helps,
Captain

Read other 2 answers
RELEVANCY SCORE 63.6

I have two week old X1 Yoga (20FQ) and the fingerprint sensor seems to work very unstable. It worked fine for a while and and suddenly in Windows 10 login it didn't work at all. It seems to read multiple times as when I put my finger close to sensor it immediately gives "Too many failed attempts" message and asks to login with PIN-code. I removed the device and re-installed the latest drivers from Lenovo support page and it worked again for two days. And now again I cannot login using fingerprint sensor. As the issue was resolved for couple of days with reinstalling the device, it might not be a HW-issue. Is there any good diagnostic tools available or is there a place to change the sensitivity of the sensor? Many thanks in advance for all the help!

Read other answers
RELEVANCY SCORE 63.6

 Hello, I have recently purchased a HP ProBook 450 G2 with Windows 8.1 being preinstalled and the possibility to install Windows 10. So I did, but shortly after the installation has finished I realized that the login with fingerprint, respectively the fingerprint function in general, does not work anymore with Windows 10 so this function which I actually paid for became useless.I tried installing HP ProtectTools etc.. but I couldn't find anything for my Notebook model. Also my hotkey for birightness and mute key are not working, i have download the drivers and it aint works.Sometimes i face no voice when i plug headphones. Also i sometimes face that my system shows some graphical lines when i turn my sytems that seems LCD issue, dont know why i am facing these issues with windows 10. When i connect my phone to the USB port, and the lid put down after sometime it aint strat my laptop. Then i have to remove and plug again the battery to start work. Is anyone having the same problem with this model, or is there any solution? Please help  

A:HP Probook 450 Fingerprint Sensor with Windows 10

hey having exactly the same problems, since i upgraded to win 10

Read other 1 answers
RELEVANCY SCORE 63.6

Lenovo yoga 900-13isk Bios c6cn39ww, I have been having trouble using the laptop, as soon as I move the screen it will go off, if I slowly move the screen back to a certain spot it will show again. it as if I just dim the screen, if I hook up an external monitor it works fine. what I've done so far, removed and reloaded the complete computer to factory, no help, I then removed the battery - reinstalled and again same problem., next I read the ribbon cable might be loose, I removed the back and moved the ribbon and did not get any flickers on the screen so My thoughts are the ribbon cable is good. I then re installed the lenova drivers and I'm having no luck repairing. I then ran the lenovo diagnostic, all passed until I got to Accelerometer interactive test it failed (9s)??? the error is unexpected values read from the sensor.and Gyrometer interactive test failed (39s)?? unexpected values read from the sensor.. I'm not sure what the 9s or the 39s stands for.also these test were run while the external monitor was connected in extended screen mode. nothing on the laptop monitor back light on just no desktop, the external monitor was perfect..Ideas appreciated. this laptop has been great its been used very little, basically just to read the paper in the morning, never droppedthank you

A:Fingerprint Sensor stopped working

I think you mistitled your post. 

Read other 1 answers
RELEVANCY SCORE 63.6

I got an acer travelmate 6465WLMi running 64-bit Windows 7 and after some digging around I managed to get the smartcard and 4 in 1 cardreader to work with drivers from a different travelmate.
Only problem I have now is that I can't find any 64-bit drivers for the fingerprint sensor. When I went to check the first time device manager showed it as an SMSC fingerprint sensor but checking their site didn't help at all, does anyone know a working driver?

*edit*
minor update :
http://www.authentec.com/win7beta64.cfm didn't work although one site mentioned they're used in acer laptops...guess not in mine

A:Travelmate 6465 - fingerprint sensor

Hi Smashy,

Give this a try. Not sure whether it will work, but it's worth a try.

AcerPanAm.com

Read other 4 answers
RELEVANCY SCORE 63.6

I'm currently using the M/S Keyboard with fingerprint sensor, however, it does't 'come alive' during the boot process until the welcome screen comes on. I cannot access my bios nor type any commands during boot up.

Has anyone had any experience with this keyboard? If that's just what it does, I'll replace.
 

A:Microsoft keyboard with fingerprint sensor

Read other 11 answers
RELEVANCY SCORE 63.6

Hello there. Can someone please help me in my attempt to get my fingerprint sensor operating correctly. I think I have the drivers, however, there doesn't seem to be any way to launch an install program or setup the sensor for use. Please help...I have heard something about "credentials manager" but I can't find that either and also "protech tools" another file/program I just don't seem to have. Please help ???
 

A:Help w/ fingerprint sensor; HP Compaq 6910p...

When did the problem begin, for you? From the onset, and if your computer is new, I suggest that you call HP.

Did you install OS & software from HP disks, or use HP's system recovery, or a set of HP recovery disks?

What is your firewall?

IBM Thinkpad, now Lenovo Thinkpad laptops with fingerprint sensors failed, 18 months ago, with Zone Alarm. About a yr after switching to XP's FW, the finger print reader stopped working. I called Lenovo. They determined that the reader was working, but the software was not working. They offered advice, which failed. AND, because the problem was software, the problem did not warrant a visit by an IBM / Lenovo tech.

You are not alone. Hopefully, this HP forum will help you.
http://h20000.www2.hp.com/bizsuppor...957&prodSeriesId=3357377&tx=6910p fingerprint

RF123
 

Read other 1 answers
RELEVANCY SCORE 63.6

I've been using the new 6th gen X1 Carbon for about 2 months now. All of a sudden today, my fingerprint sensor does not work. When I turned on my laptop, I tried using the fingerprint sensor for log-in. The sensor won't even flash (orange for failed, white for success). Did anyone have this similar issue? How do I fix it?

Read other answers
RELEVANCY SCORE 63.6

Summary: Fingerprint Seonsor not starting. Troubleshoot says driver is alright Details: I received an alarm from Windows Defender saying there is a device driver issue with my laptop a couple of days back. (Image 1) in attachment. On checking the device manager it shows that the device could not start with an Error Code 10 (Image 2) and the driver is up-to-date (Image 3).  I contacted Lenovo Support and they simply gave me the link to the drivers again (kind of pointless when the drivers are already up-to-date) but it changed nothing. Windows Settings show that Windows Hello is not available for the device (probably because it can't detect a fingerprint sensor) at all (Image 4).  I have tried uninstalling and reinstalling the device. Have tried disabling and enabling it. Drivers reinstalled. Nothing has worked so far.  Anyone else who faced such an issue and was able to resolve it? Please help.

Read other answers
RELEVANCY SCORE 63.6

My fingerprint sensor does not work any longer after update to Win10-64 Version 1607. I am using the latest Win10 build, the latest BIOS Version 1.15 and the latest version of the fingerprint sensor driver (Synaptics Metallica Touch Fingerprint Driver) Version 5.1.311.26 from 14.7.2016. Uninstalling the driver completely and re-installing it helped for one reboot to re-activate it, but this is no stable state, the fingerprint sensor is unavailable after the next reboot. Surprisingly the fingerprint sensor is still offered as a logon option, although iinactive. Soon thereafter there is a message during the final stage of the reboot ('there has been a problem...') and it's completely gone and completely gone. Obviously Win10-64 Version 1607 and the fingerprint driver does not like each other. Any solutions available?

Read other answers
RELEVANCY SCORE 63.6

sir/mam i download and install the Validity Fingerprint Sensor Driver2.1.0.2 Rev. A from your website File name:sp45217.exeafter installation it says you have to restart your computer then doesn't happen any thingplease tell me what to do 

Read other answers
RELEVANCY SCORE 63.6

I am using Windows 10 on a laptop hp 4540s. Fingerprint sensor worked properly, but today suddenly stopped working. Even in the device manager will not be displayed. Please help me

A:Windows 10 fingerprint sensor problem

Hi @Meysam98?,  You may try to install below-mentioned driver: Validity Fingerprint Sensor Driver http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229456&swItemId=ob_125839_1&swEnvOid=415...  I hope that answers your question.  I am an HP employee, the opinions expressed here are my personal opinions, not of HP. Make it easier for other people to find solutions, by marking my answer ?Accept as Solution? if it solves your problem. ***Click on "Thumbs up" button to the left side of my post to acknowledge the post ***

Read other 2 answers
RELEVANCY SCORE 63.6

Is it possible to use Fingerprint sign in on my pc?If yes then pls give me solution.Thanks.

Read other answers
RELEVANCY SCORE 63.6

I've Tecra M5 with Windows 7, and I'm trying to set fingerprint software (protector suite QL) but old version is not compatible and new (taken from Toshibas site) don't work. It just says "cannot find fingerprint sensor device code 0xe7210005". hardware is integrated.

In system is unknown device ACPI\TOA620A but it can't be updated. Windows don't find drivers and loaded packet (driver_fingerprint_upek_TC00237700A) or (2.19C_package) has no driver that would fit?

A:Tecra M5 - Cannot find fingerprint sensor

Hi karikana,

Have you removed the old version of fingerprint software before you installed the new version? Remove it in control panel > uninstall programs and remove the software before you install the new one. Also use a registry cleaner like Ccleaner to clean the registry.

Does fingerprint work with preinstalled OS from Toshiba?

Read other 6 answers
RELEVANCY SCORE 63.6

Hi, I just did the July update for my t470s, and now my fingerprint sensor has completely stopped working. The light doesn't come on, and it's not recognized in Windows. I do have 2 devices not working in Device Manager now. UCSI USB Connection Manager, and USB xHCI Compliant Host Controller. They both say that Windows cannot verify the digital signatures. What should I do? Thanks,

Read other answers
RELEVANCY SCORE 62.8

Dear All, I am coming to you today as I already tried many (maybe all) of the suggested solutions posted on this forum.Unfortunately, I never managed to get a proper, working install. After updating to windows 10 (Auto update from windows - Online) the Validity Fingerprint Sensor (VFS451) just stopped working. When trying to uninstall VFS driver using device manager, the biometric will dissapear from the device list. After restarting, the biometric will show the Validity sensor as if nothing happened, same driver version (2.3.0.0) and same driver details???. Tried updating, manually uninstalling, third party drivers (Lenovo) etc... without success. I never got to the point where Windows Hello would show up and let me configure the sensor.Hope someone has a solution, at least to uninstall the driver as it seems to be the main problem. Many thanks in advance for your time and advice. Olivier











Solved!
View Solution.

A:Validity Fingerprint Sensor and windows 10: Not working

Olivier i see did not work Check your windows 10 Features for the Framework installation Update the Frameworks Install the HP ProtectTools Security Manager ftp://ftp.hp.com/pub/softpaq/sp63501-64000/sp63727.exe 

Read other 10 answers
RELEVANCY SCORE 62.8

I woke up this morning, turned on the laptop, and completely out of the blue the fingerprint detection stopped working with the message "Sorry, something went wrong" (It had been working for months).  So I removed fingerprint detection in Windows setup so I could reset it, however it will not let me set up a new fingerprint.   Here is what happens when I try and reset it: 1) Click Setup.2) Click Get Started.3) Message comes up "Touch the fingerprint screen" (NOTE: The green LED illuminates).4) Place the finger on the screen and the following message immediately appears:     Sorry, something went wrong.  Close Windows Hello, and then try going through the setup again.5) So rebooted to make sure that was not the problem and tried again and it still does not work. What else I tried: 1) I uninstalled the Biometrics Driver and reinstalled it from the Lenovo site.....Same problem. My laptop = T470OS = Win 10 Pro 64 bit (Latest Updates from Microsoft)All Drivers = (Latest Updates from Lenovo)Biometric Device = Synaptics WBD(SGX enabled)    The device is working properly    Driver = 5.2.3515.26 (05-23-2017)

Read other answers
RELEVANCY SCORE 62.8

I have installed HP Protect Tools (latest version from the website) and it doesn't allow me to enroll my fingers. Windows recognises the sensor and says it's working OK, but when I click on Credential Manager in the Security Manager dashboard I only see Windows Password, Sparekey (both of which I have set up OK), bluetooth and PIN.In the admin console I click on Credentials and it shows me an oprtion to "Configure the use of the fingerprint reader" and allows me to set min and max enrolled fingers as well as the sensitivity.However, when I look at my user's Summary pane, Windows password and SpareKey are enabled and green and all the others are grey  with a tilde in a circle (~).Under Authentication I see Fingerprints in the list for both Admins and Users in both Logon Policy and Session Policy panes.Does this mean my reader isn't working? I tried it in the BIOS and it produced a result (which I didn't use).I have also reset it on boot in the BIOS (twice) and that didn't change anything.My driver is the Synaptics FP Sensors v 4.5.307.0 (27/May/2015) the latest on the website.How do I get the sensor to show up in my "Manage your Credentials" window so I can enroll my fingers? 

A:Fingerprint sensor not recognised by HP Protect Tools

Hello in bios check if fingerprint is enabled. Bios --> Security--> Fingerprint-->enable then install the fingerprint drivers. Use client security manager to enroll the fingerprint on your unit.   #hpexperday




Regards;SmileyI am an HP employeePlease click the White Kudos star to say thanks for helping.Please mark Accept As Solution if my help has solved your problem.

Read other 1 answers