Over 1 million tech questions and answers.

Unable to Adjust Recline Stand

Q: Unable to Adjust Recline Stand

I ordered an HP EliteOne 800 G2 23" All-in-One PC with a Recline Stand. All instructions I have seen so far are inconsistent with the stand I received. My stand has a lollipop-shaped key in the base that apparently needs to be removed so that the stand can be adjusted. However I am unable to remove the key with normal exertion and am afraid to apply more force until I am sure of that I am doing. The key seems to be slightly crooked so I am wondering if perhaps it was damaged in packing or shipping. If anyone could help with any information about the Recline Stand, I would appreciate if very much. So far I have found very little information, and nothing about the key, either in the box on on-line. Thank you,Ken Traynham

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Unable to Adjust Recline Stand

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 51.6

I just reinstalled windows xp home. I am running on 640x480, i cannot move that bar up. I'm running on 16 bit medium which is the only option listed under color quality. When i clicked on advanced and went to the monitor tab, the monitor type said "default monitor" and the properties button is grayed out. What should I do?
 

A:Unable to adjust resolution

Please provide more info such as display adapter type. It sounds like you have to update your display driver.
 

Read other 2 answers
RELEVANCY SCORE 51.6

I must have delited a file since I am unable to hibernate or standby

A:unable to hiberate or stand by

Can you be more specific so I can help you?

Read other 1 answers
RELEVANCY SCORE 51.6

Hello i have recently built a new PC and i have noticed that it wont go into standby mode automatically, when i set it in power option.I can go into standby manually and when i bring it out of standby the computer will start go to desktop then just shut down with no error message. It only shuts down occasionally and other times its fine any help would be appreciated to get automatic standby mode working again thanks rich.

A:Unable to go into stand bye mode

Some keyboards, mice, joysticks, and other hardware will have trouble going into and returning from standbye mode. Try removing USB hardware one by one and seeing if standbye works again.

Read other 1 answers
RELEVANCY SCORE 51.2

I am having this problem from past 3-4 days I am unable to adjust my laptop's brightness. The functions keys for brightness won't work. I also tried changing the power settings to high performance and balanced, that also doesn't changes the brightness.
I also tried manually adjusting the screen brightness. The slider moves but the brightness is not changing.

I am using IntelR (HD) Graphics family.
I tried changing it back to Microsoft basic display adapter but that also didn't help.

I got windows 8.1 installed from the factory itself and everything was working fine until past few days.

Any suggestions??

P.S. => I am using a Lenovo G50 series laptop

A:Unable to adjust brightness in my windows 8.1

First off, figure out whether or not your laptop has an ALS (Ambient Light Sensor) which will automatically adjust the brightness (if all goes well). Usually it won't override a manual setting, but it's kind of up to the developer which one takes precedence. As for the keys not working, you probably removed (or didn't install after a Windows reinstall) the helper software that controls these functions.

Read other 1 answers
RELEVANCY SCORE 51.2

Hi,   I have HP 15 AY503TX notebook (Windows 7 Ultimate 64 bit). Tried to adjust the brightness using fn+f2 and fn+f3 also tried fn+f10 but all in vain. Can somebody on this forum help me with this. Thanks in advance! PSK

A:Unable to adjust brightness on HP 15 AY503TX

Hi,Download, save and install:Intel graphichttp://support.hp.com/us-en/drivers/selfservice/swdetails/HP-15-Notebook-PC-series/12229013/model/13...System event utilityhttp://support.hp.com/us-en/drivers/selfservice/swdetails/HP-15-Notebook-PC-series/12229013/model/13...Restart system, please check now.RegardsVisruth

Read other 1 answers
RELEVANCY SCORE 51.2

When I double click or right click to adjust date and time on one of my computers nothing happens. I look in my task manager and nothing is displayed as running. The computer was checked for viruses as well as spyware but this computer does not have the ability to go online so I'm not really sure as to what's happening. Any ideas?
 

A:Unable to adjust date and time

Try this:
Start> Run> type: timedate.cpl and hit OK.
Will the date and time properties open?
 

Read other 2 answers
RELEVANCY SCORE 51.2

I recently purchased G50-45 series 80e300gyin notebook with AMD A8 processor and dos based. Installed windows 8 and updated to windows 8.1. Also installed (Beema) AMD Driver (VGA, HDAudio, SATA) for Windows 8.1 (64-bit) drivers but still I am unable to adjust the screen brightness, by default it is at full. Please help me to resolve this issue.

A:Unable to adjust brightness- G50-45 80E300GYIN

hi nikunjpadhiar,
 
Welcome to the Forums.
 
When you installed the (Beema) AMD Driver, did you remove any previous traces of the AMD Display driver?
 
If not, can you try the following:
1. Navigate to the Control Panel (Icon Views) > Programs and Features and uninstall anything that relates to AMD Display Driver / AMD Control Center.and reboot. When finished, navigate to the Device Manager > Display Adapters and the driver should show a Microsoft Basic Display Adapter.
 
2. Install the (Beema) AMD Driver (VGA, HDAudio, SATA) for Windows 8.1 (64-bit) and reboot. When done, the Microsoft Basic Display Adapter from the Device Manager should now change to an AMD Radeon Display and check if you can now adjust the brgithness.
 
In addition, check this post by marcus34 as he was able to resolve the issue.
 
 
 
Regards

Read other 2 answers
RELEVANCY SCORE 51.2

I installed Windows 10 in my Yoga 500 15IDB laptop, but the brightness can't be adjusted. Which software or driver is missing?

Read other answers
RELEVANCY SCORE 51.2

Help? P.S. sorry for making so many threads ;(
 

A:Unable to adjust or change brightness

Hi @KokoKid.
It sounds like it could be a problem with a driver update. Did you perform a Windows update recently?
I did a search I found this: Solved Laptop screen brightness won't adjust

I hope this can help.
 

Read other 4 answers
RELEVANCY SCORE 51.2

I have a HP Notebook 15 running on Windows 10. The Processor is Intel Celeron N2840. I recently Refreshed my Laptop To get rid of some useless softwares. After this refresh, Im not able to Adjust the screen Brightness through Display settings (the Option to adjust the Brightness is unavailable) or Keyboard (F2,F3) and the button in the Action Center to adjust brightness is also not available which I used to have Before. Also I updated my Intel Graphics Driver as directed in many Websites and also the Monitor Driver. But all these methods are not fixing my trouble. Further more, The "fn" key in keyboard is also not functioning, so im kinda' screwed with all these trouble.  It would be very helpful if anyone can mention any fix, Thanks In Advance !. P.S. [Sorry For the bad english, If any ], Thank you !

A:Unable to adjust Screen Brightness

Hi, Can you post back with the full Model No. and Product No. of your 15 series notebook - you can usually get this by holding down the fn key and pressing esc, otherwise see Here for a guide on locating this information. Regards, DP-K

Read other 1 answers
RELEVANCY SCORE 51.2

Hey everyone,

Thanks in advance for any help.

My Windows Vista isn't letting me adjust my power settings.


Here is what the problem:

1. I click the battery icon in the bottom right of the start bar. Then I click "More Power Options"

2. On the left panel of Power Options window, I click "Choose when to turn off the display"

My computer tells me "Your power plan information isn't available" with a red X next to it.

The same thing happens when I try to adjust any other power setting as well.

3. I click on the "Why can't Windows retrieve this information?" and it says stuff about my system administrator making changes, and that doesn't apply to me. I am the only user of the computer and my account is the administrator. I've never tinkered with any of these files to my memory.

It also says "Some of your power management settings, or the registry keys that are associated with those settings, have been deleted or corrupted. For more information, contact your system administrator." But I am the only administrator of this computer and the nice people at Microsoft never instructed me about this when I bought my computer.

I've done a SFC scan and it said "Windows Resource Protection did not find any integrity violations."

I've also tried searching for an answer on other forums but I either don't understand the solutions, which usually involve registry edits...or the problems I've found aren't exactly on target and ... Read more

A:I am unable to adjust my power settings

Download malewarebytes and run it.

Malwarebytes

It is safe to use.

But before you do that try a system restore point to before you installed uniblue.
This will show how if you do not know
System Restore - How to[11]=Backup Restore
The reason I want you to run malewarebytes is to rule out maleware that
the uniblue program could have installed.
Just a note stay away from stuff like that.

Jimmy

Read other 15 answers
RELEVANCY SCORE 50.4

It is working a few weeks when i bought it, but recently I cant adjust the brightness either in the brightness button or in the display settings. It seems to be locked on 100% brightness. 

Read other answers
RELEVANCY SCORE 50.4

I'm unable to adjust brightness on my lenovo thinkpad x230. I can't see the option in the control panel and the hotkeys for brightness dosen't work either.I've tried to install lots of dirrent intel video drivers and all the drivers I could find on Lenovos website. I've also tried to remove all drivers and carefully install them again one by one.I'm using Windows 7.Do anyone know what to do?

Read other answers
RELEVANCY SCORE 50.4

First, techincal specs.
I have a Windows 8.1 Toshiba Satellite L875D-S7332, with a AMD A6-4400M APU processor with integrated graphics. My display adapter, according to device manager, is a AMD Radeon HD 7520G.

Now, my problem is that I'm unable to adjust the screen brightness of my laptop. I haven't made any recent changes, and I noticed this about a week or so ago(I don't typically change my laptop brightness, so this could have been happening for longer). In the mean time, I've tried rolling back my display drivers, with no success, and also updating to the latest driver set, which has also not worked. I'm not sure where to go from now, does anyone have any ideas to fix this?

A:Unable to adjust laptop screen brightness

Welcome to the Forums.
What happens when you try to adjust the brightness? Is there no setting? Setting grayed out? Or you change the setting but nothing happens?

If it changes for an instant, then reverts to what it was, adaptive brightness may be enabled.

Read other 13 answers
RELEVANCY SCORE 50.4

I've noticed that I can not change the brightness of the screen. I can not change or buttons or brightness settings in the Power Options. I move the brightness bar and nothing happens.Please help me. Thanks













Solved!

Go to Solution.

A:Unable to adjust brightness in my windows 8.1 (G50-70 laptop)

Dear Diefer
 
Welcome in lenovo community
 
Can you please let me know your machine model ?
 
Thanks
Alaa





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 7 answers
RELEVANCY SCORE 50.4

I am not able to enter Stand By or Hibernate Mode. In the Turn Off Computer window I am only able to click on Turn Off and Restart (Stand By icon is gray). When I hold Shift I don't get the option to Hibernate. I also have the problem with my computer not shutting down when prompted to by windows. It freezes on the Windows is shutting screen. I tried going through Power Options with no luck. Windows XP Home SP3 on a Gateway MX3560 Notebook
 

A:Unable to enter Stand By or Hibernate Mode

Read other 8 answers
RELEVANCY SCORE 50

I'm wanting to use a screen capture program but it said I needed to adjust the hardware acceleration display driver on my HP laptop. I go to the location and the button is grayed out. This is what it reads- Your current display driver does not allow changes to be made to hardware acceleration settings. Is there anything I can do to adjust this driver so I can use the program? Total screen recorder gold.
OS Name Microsoft® Windows Vista™ Home Premium
Version 6.0.6002 Service Pack 2 Build 6002
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name WOW2U7
System Manufacturer Hewlett-Packard
System Model HP Pavilion dv9700 Notebook PC
System Type x64-based PC
Processor AMD Turion(tm) 64 X2 Mobile Technology TL-60, 2000 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.32, 3/3/2009
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.0.6002.18005"
User Name WOW2U7\Darryl
Time Zone Pacific Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.75 GB
Available Physical Memory 883 MB
Total Virtual Memory 7.68 GB
Available Virtual Memory 4.08 GB
Page File Space 4.04 GB
Page File C:\pagefile.sys
 

A:Unable to adjust display driver hardware acceleration

Which screen capture program are you using? I would try another program, this is the first time I've heard of a screen capture program asking that kind of fix.
And as for Hardware Acceleration, I know of a lot of Laptops or Notebooks do not have this feature, mine is one and my wife's laptop being the other, the Laptops are 2 and 3 years old respectively.

Good luck in resolving your problem
Ray
 

Read other 1 answers
RELEVANCY SCORE 50

I upgraded my LENOVO G580 laptop from 8.1 to windows 10. after installation the screen brightness increased tremendously and the tools to reduce it do not work. can anybody help ?

Read other answers
RELEVANCY SCORE 50

Hi,I just bought a new ideapad 500s 13ISK and install the latest intel vga driver and lenovo utility software on windows 7. But I can't adjust LCD brightness with hotkeys(brightness +/-), while other hotkeys goes pretty well. Any ways to solve this? OS: Windows 7 Pro x64intel vga driver version: 10.18.15.4279 _Display Audio 6.16.00.3180lenovo utility version: 3.0.0.4 Thanks!

Read other answers
RELEVANCY SCORE 50

Just today, my laptop won't let me adjust the brightness, and has completely removed the option to. I am currently running on Windows 10 (64-bit) and again, just today out of nowhere does not let me adjust the brightness. The laptop battery is completely dead (it doesn't work without being plugged in) but this issue has never affected anything. I would really appreciate some help with this ASAP as the screen is damaged enough already. Thanks  UPDATE: The laptop has now completely gotten rid of the option to sleep.

Read other answers
RELEVANCY SCORE 50

Until now everything was working perfect. I did a driver update today, which includes the latest display driver, and now I am unable to adjust the brightness. I tried to uninstalled the display and monitor driver but nothing works. Does anyone know how to fix this problem. It looks like it was coming with the latest driver update from today. Thanks in advance

Read other answers
RELEVANCY SCORE 50

I've noticed, today, that I'm suddenly unable to adjust my screen brightness. I have read half a dozen threads reporting the same problem; I tried all the solutions therein (from updating the driver and reverting to the most basic one to manually changing power configurations) and nothing worked. Unlike the vast majority of users who had this problem, this hasn't happened following an update to windows 8.1 (which I did several months ago -- and the adjust was working fine after that).

This might give you a hint:

* As I try to adjust it using the fn key (as I had always done previously), brightness goes up or down just one level -- and that just 'cosmetically', as in fact nothing changes. The indicator gets stuck approximately in the middle of the bar, unable to reach the extremes.

* There is more: on power management, I chose the lowest possible level of brightness when working on battery, just to see what would happen. I then disconnected my laptop from main power, and... the brightness indicator did go down to the lowest level, YET brightness remained unaltered in fact.

Anyone, please??

A:unable to adjust screen brightness - windows 8.1 - ASUS

try turning off Adaptive Display in advanced settings under power management

Attachment 56062

Read other 4 answers
RELEVANCY SCORE 50

Hi there, as above, I'm unable to adjust screen brightness (by using the 'hotkey or via settings) can anyone help?

thanks in advance

Read other answers
RELEVANCY SCORE 50

In the past few days my laptop has been behaving oddly. At first it would not allow me to adjust the brightness, neither with the function keys nor the slider. This would happen after it awakened from sleep.
It also does not like to restart now. It hangs at the "Restarting" screen until I force it to turn off by holding the power button.
In, addition, the keyboard stopped functioning. This has only happened once, though.
I ran system file check from the command line. It found corrupted files, but was unable to fix them. I ran it again in "Safe Mode" and got the same results.
I tried rolling back the display adapter. This did not solve the problem either. 
Any help will be greatly appreciated.
 
Lenovo Yoga 2 Pro
Intel Core i7-4500U
Running Windows 8.1 64 bit
 
Thanks.

A:Unable to adjust brightness after laptop awakens from sleep

Is your OS current? Have you downloaded and installed the latest drivers for all of your connected and installed devices?
Do you have the OS installation disk? Can you boot from that and run the startup repair utility?
 
Dick

Read other 1 answers
RELEVANCY SCORE 49.6

Hi, I have just installed Windows 10 (Build 1803) and I have ran Leanovo Vantage on here to update all drivers and firmware, however for some reason I cannot increase (or decrease) the brightness of the laptop at all. I did some research into this and I saw this has been an issues before on some other models but I couldn't seem to find anything related to the P51. The screen is visable, however I would say it is currently fixed at around 40-50% brightness. Has anybody come across this before and is there anything I can try to do to fix this?  Regards, Jonathan.













Solved!

Go to Solution.

A:Lenovo P51 - Unable to Adjust Brighness in Windows 10 (Build 1803)

Spoke tp soon! Driver version 23.21.13.9125 for the  NVIDIA Quadro M2200 fixed this!

Read other 1 answers
RELEVANCY SCORE 49.6

Hi, I have just installed Windows 10 (Build 1803) and I have ran Leanovo Vantage on here to update all drivers and firmware, however for some reason I cannot increase (or decrease) the brightness of the laptop at all. I did some research into this and I saw this has been an issues before on some other models but I couldn't seem to find anything related to the P51. The screen is visable, however I would say it is currently fixed at around 40-50% brightness. Has anybody come across this before and is there anything I can try to do to fix this?  Regards, Jonathan.













Solved!

Go to Solution.

A:Lenovo P51 - Unable to Adjust Brighness in Windows 10 (Build 1803)

Spoke tp soon! Driver version 23.21.13.9125 for the  NVIDIA Quadro M2200 fixed this!

Read other 1 answers
RELEVANCY SCORE 48

Using the laptop on battery, when I press on F11-12, the brightness meter is shown on the upper left like usual, but it won't move up or down.  Yet I think it's strange that all other places I can adjust brightness are fine, and especially strange that everything is working totally fine on AC power.
I tried uninstalling the Generic PnP monitor and reinstalling, but to no results.  Also, both my power settings on battery and on power indicate no adaptive brightness.

Read other answers
RELEVANCY SCORE 42

I just ordered an Envy Recline 27 all-in-one, but I currently use a system that has 2 monitors. I contacted HP as to whether the Envy can support a 2nd monitor, and they told me the video card supports 2 monitors, and it has an HDMI slot. But when I look at pix of the computer, I see an HDMI "in" (for plugging in a gaming console) but I don't see an HDMI "out" or other video out port. Does anyone out there know for sure that this system can support a 2nd monitor? Thanks for your hlep.











Solved!
View Solution.

A:Envy Recline 27

I called and finally got through to a knowledgeable customer support person who confirmed that it does not have HDMI out, or any other outgoing video port, and cannot support a 2nd monitor. So I cancelled my order and will look at Lenovo and Dell (both of whom have HDMI out ports on theirs, but we'll have to see if either one will extend the desktop or just duplicate the first monitor).

Read other 10 answers
RELEVANCY SCORE 42

How do I remove the back stand for traveling.  I have found this video  https://www.youtube.com/watch?v=2RvggCtXzHc but my stand is a later model and it is not exactly the same.  It looks similar and is placed in the same location however it does not have a slot to remove to access the hinge. Help please.

Read other answers
RELEVANCY SCORE 41.6

I didn't notice until too late that the envy recline 27 only had HDMI IN. I'm probably SOL but is there anyway to make it HDMI OUT? It'd be nice to have a second monitor.

A:Envy recline 27 no hdmi out

Hi, Many AIO computers do not HDMI out. All you need is an USB video card with HDMI such as:    http://www.walmart.com/c/kp/usb-to-hdmi-adapters Regards.

Read other 3 answers
RELEVANCY SCORE 41.6

I have bought the product on Aug 2014 with extended 2nd and 3rd year warranty. Recently, the keyboard that is bundled with the computer got faulty. Once the keyboard is connected, it automatically types random keys. I have tried troubleshooting a numerous times but nothing worked. Now, I am wondering if the keyboard is under warranty coverage so that I do not have to buy another keyboard.  Product: HP ENVY RECLINE 27-k102d (F7F67AA)Keyboard model: KBRF7171 (wireless built-in)

A:Does warranty of the all-in-one HP ENVY RECLINE 27 comes wit...

Potato2, welcome to the forum. This is a peer to peer help forum. The only presence that HP has on it are the Admins and the Mods. Otherwise, none of us works for HP.  You should contact HP Customer Support for an answer to your question.  This way you won't get incorrect information. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

Read other 1 answers
RELEVANCY SCORE 41.6

how connect hp pavilion recline 23 to tv

Read other answers
RELEVANCY SCORE 41.6

Hello,So I bought a new HP recline 27 but I am noticing that there seems to BR faint vertical lines visible down the screen. Is that normal for the screen, they are just almost visible and more noticeable on the left hand side and on lighter backgrounds.ThanksSam

A:HP Envy Recline 27 Screen

Hello @SamB-GB, I have read your post on how there are multiple vertical lines visible down the screen of your desktop computer, and I would be happy to assist you in this matter! Since you mentioned that this unit was new, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.http://www8.hp.com/us/en/contact-hp/ww-phone-assist.htmlI hope this helps!Regards  

Read other 2 answers
RELEVANCY SCORE 41.6

I bought the 27 Envy in Australia and I thought I made a good choice with the touch screen and large screen and good foot print on the desk. That was over a year ago. I also bought through the retailer Harvey Norman 3 year extened warranty. Initially I had a problem with the no reason activation of the pulsating wheel bottom mid section of the screen. It is a nightmare. It starts to pulsate and disable the access to my keyboard. I had several guys from HP trying to help but thier now how is not very good once they log onto my computer -- trail and error and no sucess. I manged to use the computer by disabling the touch screen function. After today's long update of windows 10 professional the screen behaves a bit different but when I work between the applications they switch at random. 1. The pulsating wheel is not appearig any more  so that is good 2. Switching bewtween the documents and application is no good3. I hope HP has someone that knows how to fix that -- so far I did not come across on the helpdesk that anyone could help4. NOt sure if what I write will be read by someone from HP -- but I hope so. 5. I need this computer for my work therefore I cannot afford hours of trying to resolve it but It would be nice that this expensive computer would work like it was intended -- there are millions of tablets and I have several Apple devices -- no problem with them at all - I hope HP has someone there that can help.  

A:Re: HP Envy Recline 27 Screen

Hi @Kris123456789, I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.If you are unfamiliar with how the Forum's private message capability works, this post has instructions.

Read other 1 answers
RELEVANCY SCORE 41.2

Hi there, Like others in the forum, I was extremely disappointed (to say the least) to wake up to a blue screen with "Warning - imminent hard drive failure" on my HP desktop thats only just out of its 1-year warranty. Putting aside the issue that this is pretty poor after just over one year, I now need to replace the HDD before it fails completely. I found HP's excellent video and photo instructions for how to remove and replace this drive, and it looks simple enough, but it seems to be issing the most crucial piece of info - the physical size of the drive. When I look closely at the photo of the guy removing it, it looks too slim to be standard internal HDD (which I'm told is 3.5 inch??). And when I look at a laptop drive on Amazon (which I think is 2.5 inch??), it looks too small to be that. As I need to order one asap from Amazon to replace this, I really need to know what to order. As I'm not terribly PC literate apart from using it, I'm not sure which size to buy. I was additionally confused by the fact that it had SSD and standard HDD. |I found a Seagate Hybrid" on Amazon, but wasn't sure oif this was the correct thing. I'd be very grateful if anyone could enlighten me and let me know what physical size I should be ordering. Thanks in advance.  

A:hp envy 27 recline hard drive - is it 2.5 or 3.5?

Hi: Enter the product number from your PC in the box at the link below, and you should get a list of parts. The product number can normally be found on the same sticker as the serial number. http://partsurfer.hp.com/search.aspx Since there are hundreds of model variations of the HP 27 Recline's, I picked a model out of the blue, and the parts list shows 2.5" drives are what you probably need. 

Read other 1 answers
RELEVANCY SCORE 41.2

Im trying to set up my xbox 360 with my desktop, my hdmi is connected and when i push the button the the bottom left corner, nothing happends. I have tried restoring even though it has never worked. My computer regonises the xbox in the device manager and all i can do with it is remove it.             PLEASE HELP AS SOON AS POSSIBLE -Huddy

A:HP envy recline 27 hdmi in not working!!!!

i have also tried different hdmi cables ect...

Read other 4 answers
RELEVANCY SCORE 41.2

want to know if hp is still producing hp envy recline all in one desktop 23-0014, which site can i get information on if its still on sales?

A:is hp still producing hp envy recline all in one desktop 23-...

It is still being sold. See the search I did at the followin URL.https://www.google.com/search?q=HP+Envy+Recline&ie=utf-8&oe=utf-8&client=firefox-b-ab Reproduce the search locally so you can get results appropriate to your region of the world.

Read other 1 answers
RELEVANCY SCORE 41.2

how to connect pavilion recline 23 to projector

Read other answers
RELEVANCY SCORE 41.2

Hi , i have a HP Envy 27 Recline i tried to make a Hackintosh but later dont work and the pc dont boot and stuck on the hp logo and how much enter to the bios the bios dont work's , i format the hard drive in another hp same model and install windows 8.1 but the hp envy dont wotks and the bios neither please help!! thanks

Read other answers
RELEVANCY SCORE 41.2

I  recently bought a hp envy 23 recline I7 all in one PC.   The right side of the computer is getting very hot.  Right side top corner to below, nearly 20% of the screen.  The heat is very noticeable at the screen and not much at the back side.  I don't know whether this is a  normal behaviours or some malfunctioning.  Do any one aware of similar issue.  Please help me.

A:hp envy 23 recline - ovreheating on the screen

Hi justinmanala, Welcome to the HP Forums! I see that your HP Envy 23 Recline is experiencing an overheating issue, and I would be happy to guide you towards a resolution! To begin, I will need to ask you a few questions about your computer: What is the Product and Model number?Is your computer plugged in directly into a wall outlet or into a surge protector?Is this a new occurance or has it always been a problem?What applications do you have running before the computer begins to overheat?In the meantime, please examine this document on Reducing Heat Inside the PC to Prevent Overheating. This resource should help in identifying and amending future instances of overheating. Please post back with the necessary information, and I look forward to your reply! Regards 

Read other 9 answers
RELEVANCY SCORE 40.8

i have a HP ENVY 23-m210ea beats special edition all in one . It came with windows 8.1 and worked brilliantly. now all the sound drivers ive tried since installing windows 10 do not work properly for my pc . my subwoofer does not work . there used to be controls in beats console for a subwoofer but are not there anymore. i have had various other problems as ive tried other drivers , no volume controle , no sound at all , no beats console , bass speaker working through headphone socket e.c.t.. . ive tried everything ive read so far to no avail , somebody even said bios might be the problem but i dont tamper with those things , so if you can pls can you suggest something new ty . oh and i have tried the latest hp driver

A:Re: HP ENVY Recline 23-k100xt Subwoofer Issue

Hi there @redhottoddy, I hope you find your Support Forum experience a positive one!  I understand that you are having an issue with Beats Audio after a Windows 10 upgrade.  I am happy to give you a hand with this. If you haven't already, you could try installing the driver from Windows 8.1 instead of the one for Windows 10, and see if that helps. Please let me know whether that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.

Read other 1 answers
RELEVANCY SCORE 40.8

Hi, I'm having an issue with my audio codec.I just recovered my Windows 10 on my HP Recline 27 k005d using the recovery image.After that, the built in beats speakers are not functioning.I did try to update the driver autpmatically through the device manager.The driver IDT High Definition Audio CODEC has found but it said :"Windows encountered problem installing the driver software for your device"Please help me... What should I do to get back the speakers Thank you in advance

A:Cannot find the audio driver HP Recline 27 k005d

And it said the device attached is not functioning. 

Read other 1 answers
RELEVANCY SCORE 40.8

I have a HP ENVY Recline 27-k150xt TouchSmart All-in-One CTO Desktop and the hdmi-in button fails to work consistently to toggle between my computer screen and the HDMI feed (DirecTV cable box).  Is there another way to switch between the two sources without using the HDMI-in button?

Read other answers
RELEVANCY SCORE 40.8

Hi. I haveHP ENVY Recline 27-k119 TouchSmart All-in-One Desktop PC, after upgrading to windows 10 i have no audio, I Tried to download beat audio from HP SUPPORT, no success. Can anybody help me.Thanks

Read other answers