Over 1 million tech questions and answers.

Hyper-v on windows server 2012 networking issue

Q: Hyper-v on windows server 2012 networking issue

i have a hyperv server running on windows server 2012 platform, and i have a virtual machine configured on it.
i have created 2 virtual switches one for internal LAN and the other one it for WAN access.
this VM will work as transparent bridge, so i have disabled the Allow Host to share network connection option on both Virtual switches.

now when i disconnect the cable from one interface the virtual switch keeps connected and the virtual machine does not detect that the cable is disconnected.

please advise.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Hyper-v on windows server 2012 networking issue

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 97.6

The following Structure is a representation;
PC1 - IP 10.0.0.10 - FQDN PC1.DOM.LOCAL
PC2 - IP 10.0.0.20 - FQDN PC2.DOM.LOCAL
SRV1 - IP 10.0.0.5 - FQDN SRV1.DOM.LOCAL - File Share 'FLDR1' / USR1<ReadOnly>


SRV1 has a folder, FLDR1, being shared for read only access to user USR1.

PC1 and PC2 logged on as Domain User USR1.
PC1 is able to connect to SRV1 to see and look in FLDR1.
PC2 is unable to connect to SRV1 to see and look in FLDR1.
Now there are multiple means of connecting to SRV1 to see the share FLDR1.


The following connections were done in combination with the following methods;
Method 1 - via logged on Domain User CMD Prompt with 'NET VIEW'.
Method 2 - via logged on Domain Administrator CMD Prompt with 'NET VIEW'.
Method 3 - via logged on Domain User Explorer Window.
Method 4 - via logged on Domain Administrator Explorer Window.

Connection 1 - via Server Name.
Connection 2 - via Server IP Address.
Connection 3 - via Server Fully Qualified Domain Name.


Now that the stage is set, going to the fun part...

Testing from both PC1 and PC2...
-------------------------------------------
PC1 : Method 1 - Connection 1 - Success
PC1 : Method 1 - Connection 2 - Success
PC1 : Method 1 - Connection 3 - Success
PC1 : Method 2 - Connection 1 - Success
PC1 : Method 2 - Connection 2 - Success
PC1 : Method 2 - Connection 3 - Success
PC1 : Method 3 - Connection 1 - Success
PC1 : Method 3 - Connection 2 - Success
PC1 : Method 3 - Connection... Read more

Read other answers
RELEVANCY SCORE 94.8

Dear Sir / Mam

I m using Windows server 2012 R2 Standard

Networking speed is too slow transfer rate is 5 Kb/sec while i m transferring something to my domain user then its take long time to transfer , Also i m using SQL based application which results application is also worked slow on domain user and on server its working fast.

Windows Firewall is turned off but issue not solved.

Kindly help
 

Read other answers
RELEVANCY SCORE 88.4

Hey guys,

This is the first time using the forum so I apologize if this has been put in the incorrect place. My brother recently installed Hyper V Server 2012 r2, which boots up everytime I start my laptop. I just want help in how to completely remove the software and help get back my Windows 8. Neither me or him know how to get back to windows 8.

Thanks in advance guys.

A:Help with Windows Hyper V Server 2012 R2

Well, you must have a bootable Windows 8 DVD or USB. Go to the BIOS settings, select to have the DVD or USB device as first device. Then it should say "Press any key to boot from CD or DVD..." if you have a DVD or it will show the OEM or Windows logo directly (USB). When you are prompted for the installation type, choose Custom. Make sure you have backed up your files. Delete every partition of Disk 0 and then choose the Unallocated Space to install.

I hope this helps you.

Read other 4 answers
RELEVANCY SCORE 82.8

Every 5 minute two  vmg.temp files are creating into windows 2012 standard Hyper V base server, please help ..

Read other answers
RELEVANCY SCORE 80.8

Hi. I'm using a 2012 r2 server hyper-v. Home network. Have internet access. Physical NIC.

I created a 2008 server vm. Not a DC. Just a plain 2008 r2 server in a workgroup.
I created an external switch, allowing management OS to share network adapter.
In the virtual machine settings, Network adapter is set to use this external switch.

I want the 2008 server vm to be able to connect to the internet to apply windows updates.
It is unclear to me what I need to do make this happen.

I believe the issue is in the ip configuration but I need some help.

Thanks in advanced
bzserverguy
 

Read other answers
RELEVANCY SCORE 79.2

Hello Friends, I am building a programming project and would require a Virtualization software to try it. So, I thought to get the Standalone Hyper-V Server 2012. So, does anyone know how to get them? I have heard that they are a standalone Operating System then installs on the Hard Drive and run like an OS.

Please also provide a link to Download it and the installation guide.

Thank You................

A:How To Get Microsoft Hyper-V Server 2012?

Hi there
Google should work in India -- maybe they don't have it any more -- took me 2 secs to get the links.

31 Days of Our Favorite Things: Get Happy over the Free Hyper-V Server 2012 (Part 9 of 31) - Matt Hester&#39;s WebLog - Site Home - TechNet Blogs

Cheers
jimbo

Read other 2 answers
RELEVANCY SCORE 79.2

Heya so I installed hyper-V on my other computer because I wanted to get a program to work on it (googled how to get my Reason to work on windows 8). Since I couldn't find the suggested setting to just turn some hyper-V settings on I thought I dont have it on my computer. After installing Hyper-V though my computer went server mode and I have no experience of that. Now I want to remove it from my comp but dont know how and googling doesn't help :S I dont mind formatting the computer, nothing too important there and after the uninstallation of Hyper-V I will install xp on it too. Didn't like W8 tbh.

Thanks in advance!

A:Uninstalling hyper-V server 2012

Nobody knows? There doesn't seem to be a solution, at least one that I can google or I am just blind. But please help! I just want to use my computer again :/

Read other 8 answers
RELEVANCY SCORE 78.4

Upon rebooting my computer, it gets stuck at cmd, and if I try to restore the system by pressing f8 or f11, it eventually takes me back to the same screen after rebooting again. At this point I don't mind deleting all of my files, and reinstalling Windows, however I don't know how. Every time I try, the problem persists. Please help me, and I thank you in advance.

Read other answers
RELEVANCY SCORE 78.4

so my brother installed ms hyper v server 2012 r2 on my computer and now has completely messed it up i cant even see the desktop i need tips on how to solve this reply to this thread or add me on facebook if you can help please
fb=laith joseph (teemo)

Read other answers
RELEVANCY SCORE 76.8

This is my last ditch attempt to try to resolve this before replacing a HP DL385P Gen8 server running about 27 VM's.

The BSOD has occurred 5 times since 8/2/2016 with no apparent rhyme or reason.

I tried running the DM Log Collector Tool, but the zip file it created on the "desktop" was empty. I assume it's because it's a Hyper-V Server with no GUI.

The server has all of the most recent firmware (including BIOS), drivers and Windows Updates.

Attached are the two most recent mini-dumps. Any help would be greatly appreciated.

Read other answers
RELEVANCY SCORE 75.2

When I create a virtual switch on hyper v, i lose network connectivity and the default gateway is missing
I have to manually put the default gateway in and disable and re enable the network adaptor each time the server restarts in order to get network connectivity. I am running windows server 2012

I have tried deleting the virtual switch on hyper v, deleting the network adaptor and reinstalling it and creating the virtual switch again

Any help would be great

Thanks
 

Read other answers
RELEVANCY SCORE 74.4

Red Shield - IE Enhanced Security Configuration for Administrators
Amber Shield - IE Enhanced Security Configuration for Non-Administrators
Green Shield - IE Zones
When I click on the how to correct this it takes me to a Windows 2003 page not 2012 for the first issue

And page does not exist for the second issue ?
Any ideas ?

Read other answers
RELEVANCY SCORE 73.6

Dear Team,
I have two server DC1 (main domain controlller) and DC2(Additional Domain controller). My main domain controller was having some issue so i seized all roles to DC2 so it can work as domain controller. Now i fixed DC1 and trying to make it Additional domain
controller but unable to connect it. Even i have mentioned ip address of DC2 in preferred DNS. Please find the error below while joining DC1 to domain.

Note: This information is intended for a network administrator.  If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.

The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "ce-nai.com":

The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)

The query was for the SRV record for _ldap._tcp.dc._msdcs.ce-nai.com

Common causes of this error include the following:

- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured
to use DNS servers with the following IP addresses:

10.254.0.10

- One or more of the following zones do not include delegation to its child ... Read more

Read other answers
RELEVANCY SCORE 72.8

I want to extended screensaver timeout for some users and that too only on some servers.
All users are placed in OU and nested OU
All servers are placed in OU and nested OU
Some set of users when login to any particular server from server Group should have timeout extended till 1 hr from 15 min.
How to do that. Please if anyone can help, would appreciate.
Can email me as well @ : [email protected]

Read other answers
RELEVANCY SCORE 72.8

Hi,
We are testing a web application in IE 11 in Windows Server 2012 R2 where the cookies are not accepting. The app is displaying a warning message "to maintain a login session, enable cookies".
But the cookies are enabled in the Settings. We tried
this solution, but no luck.
The application is working fine in the Chrome
browser in the same machine also it is working fine in Windows Server 2008.
Any inputs are appreciated? Thanks!

Thank you, NaveenKumar N Founder - QAInsights.com and MyTechCube.com

Read other answers
RELEVANCY SCORE 72.8

Hi,
Is it possible to install Windows server 2012 Hyper-v on windows 8 Hyper-v? or should I use Wmware Workstation.

Thanks

A:Virtualize for test Win2012 Hyper-v server on Windows 8 Hyper-v?

You can't run hyper-v (any version) inside a VM so neither would work,
and even if you could it would be so painfully slow as to be unusable.
 
 
Bob Comer - Microsoft MVP Virtual Machine

Read other 14 answers
RELEVANCY SCORE 71.2

I had the RRAS working fine for months, I tried to configure L2PT and after restarted the Routing and remote access access services, I am not able to ping, rdp or connect to the network, even I connect vpn PPTP successfully. I undo the the L2TP settings
and restarted the routing and remote access service, but still cannot longer access any network resources.

Read other answers
RELEVANCY SCORE 68.8

We run a web proxy server on our network for internet access.
On client machines (running Windows 2012 R2) I have configured the proxy server setting in Internet Explorer "Tools\Internet Settings\Connections\LAN Settings" to point at the designated web proxy server.
When attempting to browse websites from IE I receive the "The proxy server isn't responding" error.
Conversely, browsing the same sites via Google Chrome and Firefox (installed on the same client server) return web pages without error.
In addition, if I run Internet Explorer as administrator (Right Click\Run as Administrator), I am able to browse web sites without receiving the error.
It would appear that the issue is isolated to browsing via IE when not run in elevated mode.
Has anyone come across this issue?

A:Server 2012 R2 - Internet Explorer Proxy Server Issue

Hi Dicki,
First, please try to reset the Internet Explorer. Some plug-ins may affect the proxy.
If it doesn't work, please try to perform a network capture on the client.
Please check if the client send the http traffic to the proxy server at the correct port.
If the client has sent the http traffic to the proxy server, please check if there is any warning or error in the proxy server.
To download Network Monitor, please refer to the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Best Regards.Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Read other 2 answers
RELEVANCY SCORE 67.6

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 65.6

Hello, I'm new to the forum and have been struggling with what I hope is a simple networking issue for quite some time. I'm finally coming to the experts for some backup! I'm pretty much a novice when it comes to networking as well so please bare with me. Here is the issue:

We have a small network of computers running various OS, XP, Windows 2000, Windows 7 which all connect to a server running Windows Server 2000. All computers connect to the server flawlessly will full permissions to copy edit print save, etc. EXCEPT for the desktops running Windows 7.

The issue we experience with Windows 7 are two-fold when it comes down to it:

1. We can't open Office documents (we all run Office 2010) unless we open them with Open Office.

2. Can't copy any file from the server to our desktop (we can open pdfs and images and save them to our desktop however!)

I've poured through the forum and online for solutions and have tried quite a few things: taking ownership of the folders/files, making sure full permissions have been granted on the server for my specific adminsitrator user account, etc. all with the same result.

It's a weird thing to me. I can see the files on the server, the server can see my files. All other paths talk fine to each other it's only between the Windows 7 and the Windows Server 2000. Sorry for the long post, ANY help would be greatly appreciated. Thanks.

A:Windows 7 vs. Windows Server 2000 Networking Issue

I have no idea about this, but the following links claim to have had some success:

http://windows7forums.com/windows-7-...00-server.html

http://social.technet.microsoft.com/...2-62ea2e9bf0ae

Read other 1 answers
RELEVANCY SCORE 64.8

I am new to Gen2 Hyper-V and so far I simply can't use it, because I am unable to install any (supported) guest OS from an ISO ...

So far I tried that on:
1. my HP Z230/i4770 workstation (Secure Boot disabled) host running Windows 8.1 Pro x64 (with Hyper-V feature enabled), can't boot any VM with supported OS ISO.

2. my home desktop/i3770K (secure Boot enabled) host running Windows 8.1 Pro x64, same result, error during VM boot from ISO, quoted below.

Synthetic SCSI controller (instance blah blah) Failed to Power on with Error 'The version does not support this version of file format'



Gen1 guests of course work perfectly fine with those ISOs, because emulated DVD IDE picks up the official Enterprise Evaluation ISO of either Windows Server 2012 R2 or Windows 8.1 x64 Enterprise, perfectly fine and all works OK in Legacy boot mode.
When I create a new guest and select Gen2, then no matter if I check or uncheck the Secure Boot in virtual Boot Order options for the guest (while setting the SCSI DVD at top of course), it simply doesn't work, always same error. I tried first connecting
to VM to see if it prompts for key press, but it doesn't, the error is instant on Power on when (supported) ISO image is selected to be booted.


I verified that both of official Enterprise Evaluation ISO's of either WS2012r2 and W8.1x64 are bootable in both the UEFI mode (Secure Boot enabled) and Legacy BIOS mode using a physical computer.

What am I missing here???

A:hyper-v cannot boot Gen2 guest from Windows 2012 R2 or Windows 8.1 x64 ISO - file format not supported, Gen1 works fine

Copying fixed my issues since I downloaded from the TechNet Eval Center and it puts a "parse" attribute on the file.  Copying with Windows Explorer removes the attribute: http://blog.ctaggart.com/2013/12/bug-of-day-couldnt-mount-file-in.html

Read other 14 answers
RELEVANCY SCORE 64.4

I have a Server 2012 with RDS Role installed joined to a server 2016 domain..

All clients connecting to their server profile get the following view of their mapped drives:


Clicking on the mapped drive works fine to access the actual drive but it will keep the Disconnected Network Drive label on it even after an initial click.. 

Read other answers
RELEVANCY SCORE 64

Hi,
after I installed the Hyper-V Feature on my Windows 8 RTM machine, my plan was to install a Win7 virtual machine via network-install.
The problem is after configuring the virtual switch, my host-system has no connection to the network anymore and the network-boot isn't possible too.
After configuring the virtual switch a new network adapter appears in the networkadapter management. The physical adapter has no properties activated except the virtual switch-property. The new adapter is configurerd like the old physical adapter. The adapter
is configured to use DHCP. Even changing it to a static IP doesn't change anything. There are also no changes (for the guest-machine) if I disable the shared use of the network-card in the virtual switch management.
If I use my WLAN-Adapter instead of my Ethernet-Adapter it is the same except there is a network bridge in the networkadapter management more compared to my Ethernet-Adapter (so there are two more adapters).
Configuring the virtual switch with my UMTS-Card is like the Ethernet-Card.
The Ethernet-Driver is updated to the newest driver by Microsoft.
Has anyone an idea what is happening there and how to solve that issue?

www.krifi-ware.de www.nless.de

A:Windows 8 Hyper-V Networking Problem

Hi,
I solved it.
Unbelievable but you have to disable the new Hyper-V-Adapter and enable it again solved it. This is the Adapter, that is named "vEthernet (New virtual Switch)".
That there is no network bridge seems to be irrelevant.

Read other 55 answers
RELEVANCY SCORE 63.2

Hello,
I created the following performance counter using logman.exe. 

logman.exe create counter US_Triton_Perf_Log -b 9/23/2015 09:30:00 -e 9/30/2099 18:30:00 -r -s $server -si $frequence -cf $folder\$server.txt -f $logtype  -o C:\local\logs\Perfout_$Server --a -v mmddhhmm  -rf  $max_duration

When I do this across multiple servers specifically for Windows Servers 2008/2012, the counter is created to repeat and run everyday at 930PM and stops running everyday at 430PM. This works perfectly fine as intended. However, When I do this for a Windows
2003 server, my created counter is very different.
For example, in this case, I have set to the counters to start at 930AM and end at 1830PM, because I have set a maximum duration of 9 hours, the job terminates and begins on the next day, since I have the repeat option on. However, this does not apply to
our 2003 server; logman creates the job to run once a week in this case it would be on a Wednesday. In addiiton, I noticed that the job doesn't not even start at it's indented time. It actually does not start at all. I also notice that the jobs on all windows
2003 servers are created in a pending status, which then prevents me from removing the counter remotely. 

I would like to know if windows 2003 is capable of working like my win 2008/2012 servers using logman, and if historically, the job has to be kicked off through scheduled task. 




Both Jobs are using the same criteria, but a... Read more

Read other answers
RELEVANCY SCORE 62.8

Hi,
I would like to know how to configure a Windows Server that will host a windows Diskless Client, I've read a lot of forums and blogs regarding this subject and I even tried to applied those summarized guide but until now I'm still stuck, and I hope someone
in this forum can help me or give me a detailed guide to this particular subject. I would really appreciate whatever suggestion or support that may give to me. 

Thank you,

Read other answers
RELEVANCY SCORE 62

Hi Experts,
Could someone please help me how to copy file from Windows 2012 server to Linux using rsync.

Read other answers
RELEVANCY SCORE 58.8

Hello. I'm having great difficulty accessing the internet on my HP notebook. Basically, I performed a windows update to the desktop computer to which the modem and router are connected, and ever since then, the laptop has stopped working. Actually, the desktop also had a small hangup, but Windows was able to repair and do something to the DNS... after which the desktop was back to normal. Please help with your expertise! I'm not technically challenged lol, but I'm not a wireless network expert either-

Okay, the HP laptop is running MS Vista, 32-bit operating system. It is able to connect to the router no prob, but the internet is another story.

I updated the firmware to the modem, flushed the dns in command prompt, and uninstalled and reinstalled with updated driver the network card. I also reset the router and resetup the WEP security - Both the desktop and another HP laptop are still able to access the net beautifully. What's wrong with mine!!?

In addition, I reset TCP/IP stack to installation defaults. netsh int ip reset reset.log
and...
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

loaded as attachements you will see the ipconfig /all settings on the laptop that won't access the internet and also the error screen i'm getting (these were saved as jpg's)

The second set of ipconfig /all settings (copy and pasted below) are those of the desktop that is working beautifully. Thanks for the HELP, ..much apprec... Read more

A:32-bit Vista Wireless Networking issue, DNS server trouble

Read other 9 answers
RELEVANCY SCORE 58.8

I have created a Windows Home Server 2011 VM as a guest OS inside of Windows 10, which is the host OS. The VM is working and the networking is working (whew!). But I cannot figure out a way to get the integration services working. I've already selected Enhanced Session Mode in the Hyper-V Manager and Guest Services in the Integration Services portion of the VM settings. Can someone please provide me with a clue on how to get this working?
Thank you.

A:Hyper V: Integration Services for Windows Home Server 2011 VM?

Originally Posted by elessar25


I have created a Windows Home Server 2011 VM as a guest OS inside of Windows 10, which is the host OS. The VM is working and the networking is working (whew!). But I cannot figure out a way to get the integration services working. I've already selected Enhanced Session Mode in the Hyper-V Manager and Guest Services in the Integration Services portion of the VM settings. Can someone please provide me with a clue on how to get this working?
Thank you.



Anyone?

Read other 3 answers
RELEVANCY SCORE 58.4

Hi, I upgraded my S7-392 to Windows 10, and as soon as I enable Hyper-V in Windows 10 and reboot, the screen gets stuck at the boot logo. The progress ring is spinning and nothing happens after that. I can login in safe mode and disable the Hyper-V, and the system boots normally. I tried this many times. Everytime I enable Hyper-V, I am unable to boot into windows again (until I disable Hyper-V). I also performed a clean install of Windows 10 pro on my S7-392, and the same problem persists. Any solution to this. This is really urgent and important. This is my primary development machine, and I need to run Windows Phone Emulators in Visual Studio. Thanks and appreciate quick help. Naweed

A:S7-392 issue with Hyper-V and Windows 10

BIOS on your S7 is the latest 2.12? if not, try to update it and check again:http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_2.12_A_A.zip?acerid=635381599989913185&S...

Read other 9 answers
RELEVANCY SCORE 58

Hi
I am working with windows 8 and I have installed SQL server 2007 and visual studio 2010. Now I want to upgrade these setups to SQL server 2012 and visual studio 2012. what is the advantages of what i want to do and how can i do it easily without corrupting the operating system? Please help.

A:Installation of sql server 2012 and visual studio 2012

SQL Server has an upgrade option that is pretty painless. Just run the setup file from your 2012 installation media and click the upgrade option. It will ask you what instance to upgrade, run some checks, and then upgrade it for you.

Visual Studio is a little different. If you install 2012 without uninstalling 2010 first, you will simply just have both versions to choose from. You can completely uninstall 2010 before installing 2012 by finding your 2010 installation file and adding the uninstall and force switches when running it(ex. "C:\vs_ultimate.exe /uninstall /force").

If you keep 2010, 2012 will ask you if you wish to import your settings and whatnot from 2010. If you uninstall 2010, 2012 will just have it all when you open it for the first time.

Read other 1 answers
RELEVANCY SCORE 57.6

Hi, 
Can someone help me with this info?
How this should be configure on the hyper-v host and the VM?
The switch is already configured.
Thank you very much,
Yakir

Read other answers
RELEVANCY SCORE 57.2

Hi 
I have recently installed a server 2012 and configured remote access and users are able to access RDP from all clients. Recently Windows 7 machines are not able to access the remote desktop, its shows an error "This computer can't connect to the remote
computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator. " I have disabled the network level authentication from local policy but the issue still exists.
Windows 10 machines are able to connect the remote desktop.  
Please help me to resolve the same. 
Thanks.

Read other answers
RELEVANCY SCORE 57.2

Hi all,

I've just purchased a HP micro server (?100 cashback deal) as want to learn windows server 2012 and also look to setup a home server.

can anyone recommend or point me in the direction of books, videos on where i can learn about installation / setup and maintaining a server setup for either home and in a business environment?

Many Thanks
andrew

A:windows server 2012

  
Quote: Originally Posted by ascomputers


Hi all,

I've just purchased a HP micro server (?100 cashback deal) as want to learn windows server 2012 and also look to setup a home server.

can anyone recommend or point me in the direction of books, videos on where i can learn about installation / setup and maintaining a server setup for either home and in a business environment?

Many Thanks
andrew


What version of server 2012 do you have? Also what client operating systems do you have? Windows 7 Home premium, professional, ultimate?

This can affect what services you can offer to clients.

Josh

Read other 9 answers
RELEVANCY SCORE 57.2

Hi,
I became a member of dreamspark simply because they offer Windows 8 for free. I became a vertifyed member only to find out that they dont offer Windows 8 for free to Students. However they do offer Windows Server 2012 free to student.

what is it?? Can i use it as Windows 8?

A:What is Windows Server 2012

Hello Mitchell,

Windows Server 2012 is an operating system like Windows 8, but designed for servers.

Microsoft | Windows Server 2012

Read other 17 answers
RELEVANCY SCORE 57.2

Hello 8forums,

Really great forum here and I'm glad to join. If I posted this in the wrong section I apologize.

Okay now here's my problem. I'm currently trying to setup Windows Server 2012 for my dad. The main thing it will be used for is storage of movies, photos and backing up Excel documents for work. This is a copy a friend burned him onto a disk and is currently NOT activated. He wanted to check it out before purchasing the license. I have installed it onto an old HP Pavilion a1640n and everything went fine with installation but, now that it is installed I cannot connect his Win8 computer to it. I have Googled this and found a method but, it doesn't work. I'm told to open a browser and enter in the address bar " HTTP://Server-name/connect " (Server-name replaced with then name of his server) and I should get a connector software download page. I do not get this software download page I just get a server not found page. I have tried entering other possibilities into the address bar, too (192.168.0.xxx/connect, adding .com etc.) nothing works. If I can get any help with this it would be appreciated.

I have tried:

Completely reinstalled Windows Server 2012
Reinstalled Ethernet drivers on the WS2012 box

Things they may be causing the problem:

As I said the Windows Server 2012 is not activated.
The WS2012 box is stuck on public network type and the W8 box is stuck on private network type.
The WS2012 box does not show up on my network on the W8 box but,... Read more

A:Windows Server 2012 Help

Are you trying to access the server from a remote location using a local IP non outside routable address? Why are you trying to go through IE to get to the server?

Read other 3 answers
RELEVANCY SCORE 56.8

I would like to ask you regarding Z840 and Windows server 2012 r21.Is it possible to install Windows server 2012 r2 on Z840? 2. if it is possible to do it, what should i do at first?ex) setup bios or driver update..etc

Read other answers
RELEVANCY SCORE 56.8

Hi I downloaded the .iso of windows server standard 2012. I was told to use the windows 7 usb dvd download tool but when I browse to the .iso of windows server standard 2012 and try to load it. It says that "the selected file is not a valid ISO file. Please select a valid ISO file and try again." I cant figure out why it is doing this but is this a common problem? are there alternatives tools that can put windows server 2012 standard onto a bootable USB drive because my server has no dvd drive, just a cd and USBs. Please HHHHHHHEEEEEEEEEELLLLLLLLLPPPPPPPPPPP!!!

A:Bootable USB for Windows Server 2012

Poweriso free ( unregistered ) version seems to work very well.

PowerISO - Create, Burn, Mount, Edit, Compress, Encrypt, Split, Extract ISO file, ISO/BIN converter, Virtual Drive

If you d/l from there , it just runs as the free version.

Read other 6 answers
RELEVANCY SCORE 56.8

Hello,..

There are suppose some pre-made groups in windows server 2012,..like guest, remote desktop users, administrator, administrators...etc...

So i want to know that how to modify "administrators" group settings to limit/disable some permissions without affecting "administrator" group !

Kindly help me.

Thanks

A:How to set permissions in windows server 2012 ?

Hi,

Which permissions/privileges in particular where you looking to remove from administrators?

Read other 5 answers
RELEVANCY SCORE 56.8

My Windows 8 Desktop and Tablet are always getting optional updates for errors regarding Windows Server 2012 R2. I have no idea what that is, and if I should install them. I'm not running a server, so I'm guessing that I can just hide them. Am I right?

Read other answers
RELEVANCY SCORE 56.8

On Windows Server 2012 R2 DHCP

I have a network in 128.19.4.1 -- 128.19.4.254 but now all IP address has been assigned to all system but i have 400 system i.e i want to increase IP address range so that all 400 systems can get IP address and internet and all should be able to communicate each other

How to resolve this issue? Please let me know if required more information.

Thanks.
 

A:On Windows Server 2012 R2 DHCP

Is this in a work place network?
 

Read other 3 answers
RELEVANCY SCORE 56.8

I have recently installed windows server onto a spare Hp laptop. I am currently having issues with the graphics with only 640*480 being available. Is there any way I can update the drivers? (I am running server via hdmi to Tv)

A:Windows Server 2012 on HP Laptop

Hi: Try the windows 8 graphics driver from the notebook's support page. That would be the only suggestion I can offer.

Read other 1 answers
RELEVANCY SCORE 56.8

Hello,

one of our virtual server crashes to BSOD regularly. I don?t have any clue what the reason of that could be.
I created the needed zip file and added it to the attachment.

can you help me to find the problem of this server?

Thank you!

Philipp

Read other answers
RELEVANCY SCORE 56.8

Hi,
I am using windows server 2012 R2 on hyper-v. because of some reasons my server turn off. When i start the machine it just keep spinning. Please find the below screenshot. Can anyone give me a solution to make it work.

Read other answers
RELEVANCY SCORE 56.8

My office computer runs Windows XP Professional SP3 (see below), and I'm connected to our new server running Server 2012 Essentials. For the last month or so, at 4:00 every afternoon my computer loses its connection to the server. I have two programs that access the server, and both give me error messages and freeze, and I need to restart to get back to normal. I don't pay much attention to my clock, so I'm typically on the phone with a customer trying to accomplish something when my system has a meltdown.

The same error messages come up each time:

The Security System detected an attempted downgrade attack for server cifs/DELLSERVER. The failure code from authentication protocol Kerberos was "There are currently no logon servers available to service the logon request.
(0xc000005e)".

The Security System could not establish a secured connection with the server cifs/DELLSERVER. No authentication protocol was available.
According to the error logs, this happens in the evenings and early mornings too, although not every day. When it does happen during non-work hours, it looks like it's consistently an hour apart (1:10AM, 2:10AM; 4:10AM, etc. or 5:35PM, 6:35PM, 7:35PM). The error will show up 3 or 4 times in a row, then everything will work fine for several hours.

I do not have any idea where to start to fix this. To my knowledge, I'm the only one with this issue, so I'm pretty sure it's a problem specific to my machine

As alway... Read more

Read other answers