Over 1 million tech questions and answers.

Tried backing up files using Roxio Creator Classic- one problem

Q: Tried backing up files using Roxio Creator Classic- one problem

Half of the folders are empty! Just the empy folder got copied. Any ideas/suggestions? The project covered about 2 discs. I looked at the 2nd disc and more than half of the folders were empty. Tried the first disk and each time I tried opening a file it stopped responding and eventually Windows Explorer shut itself down.

I tried the fourth time and autoplay kicked in and when I tried to click on a file to see if it was actually on the disc it asked me if I wanted to retrieve it and send it back to it's previos location. Isn't there a way to just make a DVD+R that has all the files on it so I can just open the file I want like you used to do on a diskette or a CD-R???

I might just have to say screw it and go get an external hard drive because I'm about to throw my laptop out the window because of all my problems with the stupid DVD burner! UGH!!!

RELEVANCY SCORE 200
Preferred Solution: Tried backing up files using Roxio Creator Classic- one problem

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Tried backing up files using Roxio Creator Classic- one problem

Donít know about Creator Classic, but Iíd guess that the Laptop burner is OK, it was just given bad instructions.

External HDs are the way to go. May I suggest, shopping for an External HD Enclosure - then shopping for sales on internal HDs. You can get more gigs for the buck this way.

Donít throw the laptop out the window, you could hurt someone. Ship it to me instead.

Read other 1 answers
RELEVANCY SCORE 106

Many times in the past I have been able to burn data files (photographs) to a blank CD using Roxio Easy Media Creator 7's Creator Classic. All of a sudden, however, I'm unable to do so.

This morning, as always, I opened the program and entered the files (photographs) into my Data Disc Project. I then clicked on Burn and the Burn Progress window appeared; however, at the bottom right of the window I noticed that Burn is greyed-out.

Could someone please tell me why the Burn function has been disabled and how I can solve this problem? Thank you.
 

A:Roxio Creator Classic - unable to burn data files

Read other 11 answers
RELEVANCY SCORE 94.8

I read the other posts about Roxio but my question is a little different. I use CD-RW discs to back up my documents and photos. When I open the interface I have the files I want to back up in the top view and usually the CD-RW which has been put into my CD ROM loads and I can see what is on it. I then highlight the files I want to burn and "ADD" them wherever on the CD-RW I want them to go. This morning I burned one bunch of files, then cleared to a "New data disc" and put in the next CD. It did not load and the bottom view pane stayed blank though I could go to my Computer and clearly view what was on the disc. I assumed it was a fault on the CD and was able to click on it in the top pane and reformat then go back to my files and put the whole bunch onto the lower view and burn from there. I checked to make sure "Read only" was NOT selected, burned the file and thought nothing more of it till I tried other discs. Now none of them are showing in the view pane of creator Classic, even the one I rewrote. I did a full installation and reinstall of Roxio but the same thing is happening. I love my Roxio (even if I do have ther AVS programs, which, by the way I can't figure out for CD-RW discs as it keeps wanting to erase the disc.) so if I can get help with my Roxio I would much appreciate it.

Failing that...would I have to erase and reformat all of my Roxio discs before AVS will write onto and then keep adding to them?
 

Read other answers
RELEVANCY SCORE 76

I have Roxio CD Creator Classic, v. 6.1.1.48 and since I updated XP Pro to SP2 it fails when I try to write a CD from an iso image file. I can successfully write the same image using a different program.

The two errors I get are E80041843 - invalid operation code, and E80041925 - track writer error.

I get the errors early on in the process, seemingly before anything is actually written to the CD-R.

I've tried uninstalling and reinstalling the software. No change in behavior.

I have a Sony CD-RW CRX230E.

Larry
 

A:CD creator classic wont write image files

I found this refference on the Roxio website and whilst its refering to Creator 7 it does mention a problem with a replaced file.
 

Read other 2 answers
RELEVANCY SCORE 74.8

Hello,

I'm new here and I have a problem that perhaps someone can help me resolve.

I have an AMD 2000XP system with a Soyo Dragon Lite KT333 board. I have 512MB of ram, and CD-ROM and CD-RW (Creative 8-4-32). I am running Windows 2000 Professional.

I am using Easy CD Creator 5.0 to try and burn CDs. My CD-RW unit is a secondary master and my CD-ROM is the secondary slave.

When I try to burn data or music, the software does so without producing any errors. However, after the burn session is over, my newly created CD is corrupt...when looking in the MY COMPUTER folder, I see nothing but "Compact Disk (D: )" and when I click on it to open it, I get "D: is not accessible, incorrect function."

When check the properties of the disk, I see an empty disk...0 KB on it. I have leaving the session open, closing the session, trying to burn data, music, anything...it just ruins my CD's...and there is something on the CD's...i.e., it has indeed burned something on the CD's because when looking on the burned side, there is a dark band of burned area where the burner has written onto the CD.

I am completely stumped. I used to use this same software on my previous system...an PIII 650 with an Asus board. I had the same CD players also....I just carried these guys over.

To see if it was my CD-RW malfunctioning, I tried using a shareware burning software called BurnQuick...that worked but as it doesn't have any fancy functions such as mixing ... Read more

A:Roxio CD Creator Problem

Read other 11 answers
RELEVANCY SCORE 74

Usually when I click on the desktop icon or start menue icon for Roxio- I get the opening graphic with choices for all the modules (They call this "Home"- it has options for Easy CD Creator, Drag to Disk, Audio, etc.) However, now I get nothing. I can actually burn a CD by selecting the Creator Classic module in the Start Menue folder-- but the usual opening selector graphic is not working.

I checked the icon properties and searched for the target- a file called:
"C:\Program Files\Common Files\Roxio Shared\Project Selector\Projselector.exe"

It is there, but double clicking on it does nothing.

The only thing I can think of that even remotely relates to this is that the other day I went directly to the Start Menue choices and clicked on "Creator Classic" rather than my usual MO of clicking on the desktop icon to start the program--- but I don't see how this would change anything.

Like I said, I can still start each module--- just not the selector graphic??? Does anyone have any ideas?

I have an XP-P4. I use ZoneAlarm, AVG, SybotS&D, AdAware and Stinger on a regular basis.

My first guess is to try reinstalling Roxio- but thought I'd check to see if anyone had additional thoughts or experience.

thank you for reading this,
letchworth
 

Read other answers
RELEVANCY SCORE 73.2

Just upgraded Roxio 7.0 to 7.5. Everytime I start the application, it tries to reconfigure and reinstall. What a pain.

Anybody know how to correct this?

Thanks for any help.
 

A:Problem with Roxio 7.5 Easy Media Creator

I just got that software too, and when I hit back up my pc, it would freeze. I did everything tech support said to do and they think it is a bad cd. They are sending me a new one. I was able to burn some things but I am not satisfied til it all works as advertised. I will let you know if a new CD works for me.
 

Read other 1 answers
RELEVANCY SCORE 73.2

Hi I have uninstalled roxio completely from my computer. I even deleted anything from my registry that said roxio. Was having problems with it. Now the strange this is when i click on my microsoft anti spyware program before it will come up a box comes up that says Preparing to install, Roxio Easy Media Creator. Then comes another box that says. Roxio Easy Media Creator Installshield wizard. with a big red x unable to find a certificate file. Then a box that says could not open the certificate reading DLL. How do i get rid of that? I have tried now for 2 weeks. I have nothing roxio on my computer. But when i click on my microsoft antispyware this comes up first. I have uninstalled the masw, and put it back again. I still have the same program. Can someone tell me what i need to do to stop this from coming up? Please, hugs,
 

A:Roxio Easy Media Creator 7 problem help please

Read other 13 answers
RELEVANCY SCORE 73.2

can someone please help me with my problem. I have used easy cd creator to burn music cds but today, i tried to make a data cd... I cant even get to the formatting part. When i click on format it does its thing for a while and it says illegal request or something. Says i have to reboot my computer. Then it messes up the cd so it cant be used again.. By the way im using LG burner
 

A:Roxio Easy CD creator - DirectCD problem

Read other 6 answers
RELEVANCY SCORE 73.2

I am trying to record to a DVD+RW but the drive is not recognized and the program want's to record to CD. I have the drag and drop for copying but it does not give me the option to change the drive to DVD. I have read several of the post but still need some imput, The DVD player just say's DVD on the face of it, Does this mean that I cannot use the DVD-RW'S with this player? Or can I somehow format the DVD-RW disc so I can burn to it? If so can someone please explain to me how I can do this? It would be appreciated. Would the easiest solution be that I go get just DVD's? I am very frustrated and have spent hour's trying to figure this out. I realize it could be right under my nose (An easy fix) But I'll tell you I don't get anywhere with the no tech support that Roxio offer's and am considering taking the program back for that very reason. Your help would be greatly appreciated.

Thank you,

Bambi....
 

A:Solved: Roxio Creator 8/ Problem's burning to DVD+RW

Read other 6 answers
RELEVANCY SCORE 73.2

My wife is using using Roxio Easy Media Creator 7 with Win XP and is having problems. She continuously gets messages saying one thing is "incompatable" with another and she also cannot get the background music to burn to a DVD. We'd appreciate any help we can get before I have to put her into a padded cell!
 

Read other answers
RELEVANCY SCORE 73.2

I just got a dvd burner and wanted to burn some of my movies and stuff so I can view them off of my computer. When I use the DVD builder and add titles to the dvd, it won't let me add some of my avi files. A red "x" appears in place of the preview and I can't select the file to add it. What do I need to do to correct this?

I also have Nero 6, but I cannot make dvd video without converting avi files to mpg, so I only use it for data.

My OS is Windows 2000 sp4.

Thanks,
Aien
 

Read other answers
RELEVANCY SCORE 73.2

I had a basic version of Roxio EZ Media Creator 9 on my laptop when I purchased it (HP VM6000 with 1 gig of Ram running Vista Home Premium)

I purchased a full version and installed it with no problem on my desktop which I built on my own. I decided to put it on my laptop and uninstalled the basic version.

For some reason it did not run properly so I tried to remove it. It will not uninstall. I did a chat session with HP and they said there was a patch for the Roxio. I tried it but it says it was not a win32 application.

The tech with HP suggested uninstalling and also cleaning out my temp files and then trying again after reinstalling to run the patch.

My problem is that I can't uninstall the program.When I try it just starts to uninstall and then it installs again. I am not getting the program off the computer.

Going to try safemode. Also, would it make any sense to go into reg edit and delete "all" instances of Roxio. Could take me the rest of my life but I just don't know what else to do.

Any ideas would sure be appreciate.

Read other answers
RELEVANCY SCORE 72.4

I am trying the Roxio using auto edit with cinemagic. I load all the pictures and videos and put them all where they need to be. When I play the videos they are all miscolored and unsightly. When I play the videos in their files they play fine but when they are in the slideshow they are totally unwatchable. Does anyone have any idea what could be happening? Thanks.
 

A:Roxio Easy Media Creator 9 problem with slideshow!

Uninstall, and reinstall Roxio, then try again. Do you have enough memory and an adequate video graphics card?
 

Read other 2 answers
RELEVANCY SCORE 72.4

I'm having great trouble with Roxio Easy Media Creator - so much so that I'm pulling out what little is left of my hair.

I have installed version 8 and uninstalled version 7. My problem now is that whenever I right click in an explorer window I get the following messages:

1st window.
Roxio Easy Media Creator 7
"Please wait while Windows configures Roxio Easy Media Creator 7"
The only option is a Cancel button. Click it.

2nd window
Roxio Easy Media Creator - InstallShield Wizard
"Unable to find a certificate file"
The only option is an OK button. Click it.

3rd window
Roxio Easy Media Creator - InstallShield Wizard
"There was a problem authenticating your version. Please make sure your system is set to the current date."
The only option is an OK button. Click it.

Finally, Menu may appear, though sometimes it will go back to 1st window.

This is obviously a right PITA.

According to Add/Remove programs in Control Panel Roxio Easy Media Creator 7 has been deleted. The only Roxio program is Easy Media Creator 8 (which appears to work OK).

Does anyone know how I can rid myself of this dreadful InstallShield problem that Roxio seems to have left on my system?

Any help gratefully received.
 

A:Roxio Easy Media Creator 8 install problem

Should have searched these forums more carefully before posting.

I tried the windows installer remover utility as suggested by several posters. Roxio Easy Media Creator 7 was not listed by the program, but at the top of the list was 7.0*** (I forget the exact numbers) but it looked suspiciously like the version number for Roxio Easy Media Creator 7 so I highlighted it and let the program remove it.

Problem solved. Thanks to all those people who posted before me.
 

Read other 3 answers
RELEVANCY SCORE 72.4

I am having a problem with the cd labelling aspect of ROXIO Easy Cd Creator 5 Platinum -- when I want to open up the cd label creator it keeps telling me that "This program has performed an illegal operation and will now shut down". But I can do all the other projects just fine (make a cd, copy a cd, etc) it's just the cd label one that reacts this way.

I am on WIN98 and this program has been working fine up til now. How can i fix this?

Thanks in advance!!
Merc
 

A:HELP! with Roxio Easy CD Creator 5 Platinum -- Labelling Problem

I always found the best solution was to uninstall roxio and never reinstall it.
 

Read other 8 answers
RELEVANCY SCORE 72.4

I recently tried (unsuccessfully) to make a rescue disk using Macrium Reflect Software. In the process of dealing with my DVD w/r +/-, Roxio software was triggered. This is software that came installed with my pc in windows xp pro SP3. I have an installation disk which says Roxio Creator & MyDVD 9.0 DE.
 
I have never used the programs until now - For years they sat untouched, showing in Revo uninstaller with the installation date as 2009 - I think that I did a reinstallation of Windows at that time. Almost immediately, Roxio seems to have started updating all the parts of these programs, and added a few items as well, including Sonic Activation Module, and an updater. All the related software got an updated installation date of the day I opened the program, and continued getting more updated dates. My computer startup became very slow, and I suspected the cause could be these new Roxio updates. So I decided to uninstall this software, and if I need it, I will reinstall it.
 
I use Revo uninstaller, and ran it for MyDVD. On level 4, it came up with over a thousand registry entries. This concerned me, so I went back to level 3. A number of entries were in common files/shared files folder: if they were in a subfolder with the word "roxio" I deleted them. My intent was to also uninstall all the Roxio Creator programs one by one (each part of the program shows up as a separate installation). When I scrolled through the registry entries, I found a number of them incl... Read more

A:Removing Roxio MyDVD 9.0 DE and Roxio Creator

I haven't used Roxio Creator in years and years and years!  However, have you considered seeing if your computer will boot from a flash drive, and if it can, create the recovery disk on a flash drive?  On my system, it boots a lot quicker.
 
Best of luck.

Read other 2 answers
RELEVANCY SCORE 71.6

I recently received a dell 1505
with windows vista premium
that came preinstalled with Roxio Easy Media Creator 9

Whenever i do the quick dvd or the mydvd dvd creator applications it wont let me add any .avi files to be burned.
there is simply a "x" and the file is not selectable and cant be added

any help please because i used to burn avi's on my old laptop

A:Roxio Easy Media Creator 9 Problem On New Vista Laptop

I have the same problem, no AVI files and no MPEG 4 files. I finally gave up trying.

Read other 1 answers
RELEVANCY SCORE 71.2

I recently reinstalled Roxio Easy Media Creator 7 for the third time. The first two times were after I had done a complete reformat/reinstall of Windows XP Professional. The first two times I had no problems using EMC 7 after installation. This time, however, things are quite different. I will be describing this problem from memory, so my account may not be completely accurate, but I'll do the best I can:
Whenever I click on the EMC icon to open the program I get the following message:

Please wait while Windows configures Roxio Easy Media Creator 7

Gathering required information:

If I let this process run its course, it repeats itself over and over for at least five minutes each time. This has never happened before. In fact, any time I click on any icon or link within EMC, I get this same "...wait while Windows configures...." message -- again and again and again. I can either sit there and watch it eventually play itself out, or I can cancel, which is what I've done more than once.

Also, I notice that any time I boot up now, I get the following message:

Windows Installer preparing to install.

Both of these processes seem to take at least five minutes to complete. When they have finally finished I find that I am then able to use whichever EMC function I have chosen. Still, something is obviously radically wrong. I finally just gave up and uninstalled the program, and the problem disappeared as I figured it should. I attempted another reinstallati... Read more

A:Solved: Major problem reinstalling Roxio Easy Media Creator 7

Read other 12 answers
RELEVANCY SCORE 64.4

good day:
My father has roxio creator 10 and is to have quite a few problems with the program.
It works fine but if he doesn't use it for a few days, it will not load, or do anything.
He even doe the ctrl,alt delete and nothing happens, doesn't have not responding and or that it is running. It just doesn't do anything,
Is anyone having the same problems.?
he is using windows xp
pentium r 4 cpu
1.80 ghz
1.97 gh2
1 g of ram
I hope this is enough information
or does anyone have a different program to suggest.
He has the earlier version of roxio and had no problems with it.
Thankyou
Laura
 

A:roxio creator 10

Well, Roxio 10 does, or at least tries to do so many things now, what part of it is not responding? As far as replacement programs go, same issue, replace what part(s)? If its just used for burning, CDBurnerXP, ImgBurn and a couple of other programs handle that aspect quite nicely for free.

The only part that doesn't work for me is the virtual DVD drive emulation--instant reboot crash, so I use a couple different emulators that work just fine instead.
 

Read other 2 answers
RELEVANCY SCORE 64.4

I had Easy CD Creator 4 installed when I bought my computer in 2001, running on Windows ME and had NO PROBLEMS at all with it. I still have the disk for EZCDC4.

Computer crashed in Jan03 (unrelated) and Roxio EZCDC5 was installed by store (no disk provided). Had endless problems with it, so I re-installed V.4 and was able to burn a few CDs using V4.

Last week I tried to Delete Roxio V5 and start over. Also deleted V4 and re-installed V4.

Now I have a REAL problem..... V4 is installed, but every time I put a CD in the burner, I get an error message (the screen turns blue) and the system hangs up and I have to turn off the computer!!!!!

Would appreciate any help. I'm a real novice at this, but Iwould like to go back to using Easy CD Creator 4 because I had no problems at all with it.

The CD burner is a Matsushita (???)
 

A:Roxio CD Creator

Read other 11 answers
RELEVANCY SCORE 64.4

I am unable to write to my CDs or DVDs. I have RW disks that have been been formatted and used to drag drop data and photos but now when I try to drag drop more files I get the message "Cannot copy File Name: Files on this CD-ROM drive are read-only. You cannot copy or move files over to this CD-ROM drive." When I open Roxio Creator LE Dell Edition it states No Drive Detected and I cannot format or transfer files. When I close Roxio Creator LE Dell Edition I get the message:
The instruction at "0x00a91e4f" referenced memory ar "0x7ffdefa8". The memory could not be "written". Click on OK to terminate the program
After pressing OK I then get this message:
The instruction at "0x000006d0" referenced memory at "0x000006d0". The memory could not be "read". Click on OK to terminate the program
After pressing OK again the following message appears:
Runtime Error!
Program: ...ommon files\Sonic Shared\Sonic Central\Main\Mediahub.exe
R6025
- pure virtual function call
I have checked and the file Mediahub.exe does not exist in that location.
For problems with software Dell refer you to Roxio but this version of Creator does not appear on the Roxio website.
Could anyone point me in the right direction?
Note: I can play audio CDs and DVDs OK and I can read data CDs and DVDs!

A:Roxio CD Creator

Hi TerryT,
I have exactly the same problem as you describe. However, I have found a solution for the Runtime Error problem, but it did not solve the "No Drive Detected" problem. Have you made any progress?
Lets work together,
sorenca

Read other 13 answers
RELEVANCY SCORE 64.4

I recently installed this application onto my computer hoping that I would be able to burn CD's. Everything installed properly and the application seemed to be working however when I had all my media ready and clicked the button to burn them a window poped up saying "There are no supported recorders avaliable. Make sure your recorder is powered on and that all cables are properly connected." I realized that my computer was not showing that I had a blank disc in my drive, which in fact I did.

My question is what do I need to do in order to get Roxio Creator 6 to burn me a Cd!?
 

A:Need help with Roxio 6 cd creator

elaureano said:

I recently installed this application onto my computer hoping that I would be able to burn CD's. Everything installed properly and the application seemed to be working however when I had all my media ready and clicked the button to burn them a window poped up saying "There are no supported recorders avaliable. Make sure your recorder is powered on and that all cables are properly connected." I realized that my computer was not showing that I had a blank disc in my drive, which in fact I did.

My question is what do I need to do in order to get Roxio Creator 6 to burn me a Cd!?Click to expand...

Easy CD/DVD Creator 6 requires "drive updates" from Roxio's support site in order to "see" your CD recorder. While version 6 was active (and for a period of time afterwards) Roxio would release downloadable updates to include the latest burners. My guess would be that they issued their final update between 1 and 2 years ago. So to answer your question, you'll need to visit Roxio's site and download the most recent drive update hoping it includes support for your particular writer. If not, you'll probably have to find an older drive or newer software.

FYI, starting with Easy Media Creator 7, Roxio adopted a new technology that reads the necessary info directly from the drives firmware. This eliminated the need for drive updates as any burner would automatically be supported.
 

Read other 1 answers
RELEVANCY SCORE 64.4

I get the following message when I try to run Roxio Creator DE software

"All your Drives are set to disabled. On this operating system, in order to start Roxio Creator DE you must either physically remove your drive(s) or enable at least one drive"

Please help.
 

A:Roxio Creator DE help

Do your drives work?
 

Read other 2 answers
RELEVANCY SCORE 64.4

Hi
I have recently had an unrelated problem on my pc which has resulted in me having to repair some windows file using the installation disk - windows xp home.

Since then I have not been able to use any of the video features in Roxio creator 9 such as create DVD

I get the message: " the following codec9s) must be activated before using the application MPEG-2. click OK to activate or cancel to abort.

If I hit cancel the application closes down, if I hit OK I get "no permission - bad installation" and then it closes down.

I have tried uninstalling and reinstalling creator 9 and the windows media player but it hasn't made any difference.

I was having trouble viewing video on media player as well but have followed another acticle and downloaded something that makes it work OK.

I don't know if relevant but I also periodically get an update message from windows followed by " Microsoft Windows Installer 3.1 has failed to install".

Any help appreciated.

Ian
 

A:Roxio creator 9

Read other 9 answers
RELEVANCY SCORE 64.4

I have this on my system and sometimes after either updating files on a CD or downloading something from a CD it won't let the drive open. You have to reboot and catch it as it is booting up. Is this a common problem? What is the suggestions?
 

A:Roxio CD Creator 5

Read other 6 answers
RELEVANCY SCORE 64.4

i just bought a......... memorex fortymaxx cd rw drive.

it comes bundled with easy cd-creator 5

the problem is ... it takes for ever to copy a cd

i used to use nero with my maxtor cd-rw but it died a terrible death

could anyone advise which software copies reasonably quickly

nero does not recognise the cd-rw

i use it mostly to burn films and copy music cd,s
any help would be appreciated

thanks...
 

A:roxio cd creator

It should not take substantially longer to copy with EZCD than with any other software. Maybe a few seconds either way.

Update EZCD: http://www.roxio.com/en/support/software_updates.jhtml and go to Memorex and get the latest firmware update for the burner.

You might run the speed tests for your CD-ROM and burner Ė sometimes that triggers the speed. And make sure you have the speed set to max. I presume you are burning to high speed CDR media. Most burners anymore analyze the media for speed capability. If all else fails you might try different blanks.
 

Read other 1 answers
RELEVANCY SCORE 64.4

I bought my computer from Costco in 2007 and it OS was Vista Home Premium OEM. It came with a lot of preloaded stuff that I never or hardly ever use and have cleaned house on most of them. One that I kept is 7 different Roxio Creator programs that I would like to get rid of them and just use one simple program, preferably free), if I want to burn a CD, copy photo's etc...

My question is, should I keep Roxio Creator v9 basic or unload it and get something this forum recommends?
Thanks in Advance...

A:Roxio Creator?

Hallo Born2golf, this one is very popular with our members.
I dont do a lot of burning so i am only going on what i have seen other reputiable members recommend.

The Official ImgBurn Website

You can also find a few others that are free & lightwieght in this thread

Free Software List for Vista

Read other 1 answers
RELEVANCY SCORE 64.4

Hi
when ever i try to burn this disc i get this one or more paths in this project has exceeded the maximum lentgh allowed.by the current file systm. you may continue to burn this disc, but the files in these paths may not be readable. can anyone please tell me what i need to do for this to work? i have xp home

thank you
 

A:roxio cd/dvd creator 6 help

Read other 9 answers
RELEVANCY SCORE 63.6

I have creator 7 installed and i keep getting this error and can't end up burning anything. Can someone please help me?

Error Reads:

D: AOPEN DUW1608/12X ("SEEK,SYNCH,ATIP OR MECHANICAL POSITIONING ERROR-HARDWARE ERROR". [04/09/01]


What and why is this happening? This is a new computer maybe someone out there will know

Thanks a lot,

kami469
 

A:roxio creator 7 error

there are several CD/DVD devices and media available:
original CD/R
CD/RW
and DVD as well.

You need to match the media to the device.
device .... media
CD/R .......CD/R or CD/RW but it will end up as CD/R
CD/RW.....CD/RW only if you attempt to create an R/W image
..............otherwize it can use CD/R to create a CD-ROM image.

Were you trying to create a CD/RW image and which media type was mounted?
 

Read other 1 answers
RELEVANCY SCORE 63.6

Hey Friends,

I have Roxio Creator 2009 (aka Roxio Creator DE). It came with my dell. It used to work fine, until I tried to use it a couple of months ago. It just freezes when I load it. I thought it would go away but it hasn't. I had vista and it wasn't working. I upgraded to windows 7 hoping that would fix it but it didn't. I have uninstalled and reinstalled several times. I have deleted the roxio folder from my registry and reinstalled and that didn't work (I backed up the reg if you think I need to put it back to its original state). Every time I try to start it it freezes and I have to force it to close. If I try to open it again before I restart it freezes everything and I have to do a cold shutdown

As always, any thoughts or suggestions would be greatly appreciated.

Leafer
 

A:Roxio Creator 2009

Read other 7 answers
RELEVANCY SCORE 63.6

I want to use "Drag and Drop" to copy some files (.wav, .mpeg, etc. and a Power Point .pps) to CD, but I need to make sure it will play on a Mac.

What setting do I need to use? Is it ISO (close to read on ANY computer)?

It seems I tried this and the recipient could not get the files to play back.

Any advice/tips/suggestions are appreciated (I need to burn this CD and take it with me on a family trip in a couple of days).
 

A:Roxio EZ CR Creator 6 and Macintosh?

"Bump"????
 

Read other 2 answers
RELEVANCY SCORE 63.6

I want to install Roxio Creator 2010 Pro. Following error comes up: "You must use "Turn "Windows Feature off:" in the Control Panel to install or configure Microsoft .Net Framework 3.5 SP1" I turned off (the square is blank), the Roxio Creator 2010 Pro steel asking to turn off the framework 3.5 SP1.

Please let me know how can is solve this issue?

A:Roxio Creator 2010 Pro.

i am having the same issue. As far as I can tell NET 3.5 sp1 is the predecessor to NET 3.5.1 which is included in the Win 7 installation. Therefore you cannot load it.....
If you got around this issue, can you reply to my current thread "Failed install Roxio 2011...." GPNterprises

Read other 3 answers
RELEVANCY SCORE 63.6

does anyone know were I can download it for free
 

A:Roxio Easy CD & DVD Creator

It is never free, but it is available at www.clickcooldeals.com for $3.00 TO $12 Depending on the version. But Nero basic is also only $3.00 and much better in the eyes of most.
 

Read other 3 answers
RELEVANCY SCORE 63.6

Looking in msconfig, there are a few entries that I'd like to get info on.

Under Startup:
1. CommonSDK - C:\Program Files (x86)\Common Files\Roxio Shared\13.0\SharedCOM\RoxWatchTray13.exe
2. Roxio Burn - C:\Program Files (x86)\Roxio 2011\Roxio Burn\RoxioBurnLauncher.exe

Under Services:
1. Roxio SAIB Service - Manufacturer: Unknown - Status: Running
2. Bot4Service - Manufacturer: Unknown - Status: Running
3. RoxMediaDB13 - Manufacturer: Sonic Solutions - Status: Stopped
4. Roxio Hard Drive Watcher 12 - Manufacturer: Sonic Solutions - Status: Stopped

I've tried contacting Roxio a few days ago, but I have not heard from them yet & was wondering if anyone can help tell me what each does & if I need it running at boot.

A:Roxio Creator 2011 Pro

The Roxio SAIB Service looks to be linked to Roxio's backup services.

SaibSVC.exe | CESAM Startup Items Database

Not sure what the others are for, but you could try stopping all the Roxio services and see if it has any adverse effects on your computer.

If not, leave them stopped and just use them when you need them.

Read other 3 answers
RELEVANCY SCORE 63.6

When I try to record LP records into my computer, it appears to record as there is a duration and a file size after the recording is over, but there is no sound coming out. I checked the mute and sound options, and everything looks fine there. Any idea what the problem could be?
 

A:Solved: Roxio Creator 9

You will get a duration and file size even if there is no sound; it will faithfully record silence if that is what is there. You need to detemine firstly that sound is coming over the channel you are recording from (line in, aux in, mic???). VU meters would help. Maybe see if you can record with Audacity.
 

Read other 2 answers
RELEVANCY SCORE 63.6

To install Roxio Creator 2010 pro I have to turn off the Microsoft.NET Framework 3.5.1.
Any time when I want to turn off the following error comes up. "An error has occurred.
Not all of the features were successfully changed."

Pleas can some one tell me how can I override this issue?

Thank you.

laszdatt

A:Roxio Creator 2010 Pro

Why do you have to turn off Microsoft.NET Framework 3.5.1.? I'm running 7 Home Premium and didn't have to do anything special to install Roxio 2010 pro? If you go into Programs and Features and click on "Turn windows features on and off" Microsoft.NET Framework 3.5.1. should be in the list. I would try turning it off there.

Read other 3 answers
RELEVANCY SCORE 63.6

All of a sudden, for some reason, when I go to creator classic it doesnt recognize the blank cd in the cd drive and it says there is no default recorder... Can anyone help??

A:Roxio Easy CD & DVD Creator Q?

Since you gave very little info (e.g. want your computer specs are, version of Roxio CD Creator you're using, etc.), see if this will help you out http://www.roxio.com/en/support/roxi...ticles.html#14.

Read other 1 answers
RELEVANCY SCORE 63.6

So I swapped a CD burner from one IBM in NT to another with Win 2000 - unfortunately, the burner software (Roxio Adaptec EZ CD Creator) that came with the thing is incompatible with W2K. I can't download the software from their site because I'd have to pay for it. I can load the software to W2K, but it won't run. If I try to update it from there, their installation tells me that no valid version is loaded and installation stalls. Has anyone who has had this problem found a solution?
 

A:Roxio EZ CD Creator W2K Compat.

What version of EZCD?

If you have version 4 or above, update to the latest revision for that version and then go through this: http://ask.roxio.com/cgi-bin/roxio_...X5hbnl_JnBfc29ydF9ieT1kZmx0JnBfcGFnZT0x&p_li=

Version 4 will update free to 4.05: http://www.roxio.com/en/support/roxio_support/ecdc/ecdc_software_updatesv4.html and version 5 to 5.1.1: http://www.roxio.com/en/support/roxio_support/ecdc/ecdc_software_updatesv5.html
Both versions 4 and 5 should work with Win2k with the updates.

If you are still limping along with version 3.5 or older you need some different software as that is old Adaptec software that Roxio isnít supporting.
 

Read other 1 answers
RELEVANCY SCORE 63.6

I am fed up with Roxio NXT2.  Now that NXT3 is out NXT2 crashes when I try to convert VHS tapes to DVD.  I am seeking recommendations for an alternative software program.

Read other answers
RELEVANCY SCORE 63.6

when i am putting files into the cd, to get ready to burn the cd, the program always automatically closes without any notice or warning.. could you tell me how to fix this problem?
 

A:Why does my ROXIO CD Creator always close??

hi i had roxio and discovered that mine always came up with an error message `cant find aspi` cant flush` but that was an earlier model of roxio burning program i think new one got a safty feature which just shuts itself down if it encounters any problems because everytime it did it to me it burned about 10% of the disc before it did it meaning the cdr was no good.

so roxio probably trying to avoid this i sugguest get another burning program like nero or sumthin
 

Read other 3 answers
RELEVANCY SCORE 63.6

I have been making VCDs using this program for a while however recently i have been having problems. When I go to add an MPEG file which i want to be burnt to the CD, the program crashes. This happens with EVERY file I select.

Does anyone know what i can do?

PS: program name - vcdcr32.exe
 

Read other answers
RELEVANCY SCORE 63.6

Some how my roxio cd thing closed a backup disc and made it unreadable for MS Money. I can't figure out how to make the disc readable again. I have been through every help topic and there is nothing so simple as to say 'how to make disk readable'. Can anybody help me. Greg & Grimm in MI
 

A:roxio easy cd creator

Usually, when roxio "closes" a cd, it is supposed to make it readable in most CD drives....hmmm

Have you tried copying the pertinent files over to your hard drive and browsing to the files from Money? Do you know what the file extensions should be? Has roxio changed the file extensions?

Try copying the files back to your hd and opening them. Post back and let us know how you did.

MBN
 

Read other 2 answers
RELEVANCY SCORE 63.6

[ OS: WinXP-Pro, Mem: 1GB, Processor: Pent-4 1.4GHz ] Issue: Any/all attempts fail to copy a home-made DVD using Roxio Easy CD Creator ver-8 . (yes, I have a Sony 2006 model DVD-RW unit and the Original DVD plays fine in all my DVD players). I have tried using different Sony blank discs (DVD -/+ R). I have tried copying to a temp file and then back to the DVD unit.. failed at 99%. I have tried copying to an image and then burning that image to a blank DVD.. failed at 50%. I have tried saving the original file as a composition and then burning it to a blank DVD.. failed at unkwn%. Each failure suggested an "Unknown Failure" at some level of completion ... not always the same level. I've had other issues with Roxio software and they flat-out will not respond to a plea for help via their web site, via email, via phone, nothing. I have uninstalled and reinstalled 3 times trying to resolve the problem.

Does anyone out there know of a proven high-quality Multimedia software package?? I am dumping Roxio for keeps.

A:Roxio Easy Cd Creator X

Download DVDShrink and give it a try, it's free.

Read other 1 answers
RELEVANCY SCORE 63.6

I m on Xp home sp3,I install roxio creator 2011 and when I try to open couple of applications I get an error box "Roxio creator hax encountered a problem and nees to close.We are sorry etc... contenant of the data report: Event Type: clr20r3 P1:roxiocentraflx.exe P2:5.0.0.0.P3:4c402595 P4:roxiocentralfx P5:.0.3849.2570 P6:4c402595 P7: 51 P8:7a P9: system.typeinitialization.
please help!

Read other answers
RELEVANCY SCORE 63.6

Hi all I'm having trouble opening roxio creator basic 9. I had it installed on this computer before and it worked fine. I have re-mastered this pc since. I installed the roxio cd and now I get an error message saying that all the drives on this pc are disabled please enable at least one drive.

My system is a HP Compaq small form factor mini tower dc 5700 with 3gb Ram.

any ideas on how to solve this problem?
 

Read other answers