Over 1 million tech questions and answers.

Cannot install update Microsoft .NET Framework

Q: Cannot install update Microsoft .NET Framework

It tells me updates are available. I try to download Microsoft .NET Framework 1.1 Service Pack 1 and it gives me error 652. What's up with this and how can I fix it? Thanks in advance!

Read other answers
Preferred Solution: Cannot install update Microsoft .NET Framework

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


Running Win 8.1 on a Lenovo U530 (factory specs).
I can't update the microsoft.net framework to 4.5.2 or 4.6.1.
I've tried a clean boot, the microsoft.net framework repair tool and windows update repair tool. The update repair tool fixed 3 issues and after doing so showed that there was no framework update for my pc. As soon as i began to manually download it however,
i then got a popup saying there were updates (surprise surprise, it was .net framework finally coming to its senses). And of course it didn't mean squat, the update still fails. 
On further attempts of various methods I did notice that the .net framework version 4.5.2 fails to install, while the 4.6.1 will "rollback" its installation, although this doesn't seem to have any effects ill or otherwise. 

Read other answers

Windows Update  KB 2901983 failed to install. error code 643.  Consequently I am unable to install Adobe, Photoshop Elements 13. The problem is occurring on  Dell, Latitude notebook model E6400, Intel Core 2 Duo CPU, Windows 7 Ultimate, 32-bit.  How can I determine what's preventing the update from installing and correct the problem? 

Read other answers

I try to install "Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x86 (KB2446708)" using windows Automatic update service, in many times, but i can't. Always show "66A error". Windows update center only show error for this "Microsoft .NET Framework 4 " update. (Other updates successfully install.) Then i manually downloaded its .exe installer and try to install it. Then i receive this error. How do i install this security update?

Windows Update center error.

Manual installation error.

A:Why can i install Security Update for Microsoft .NET Framework 4?

Try this:

Error code 66a .net framework 4 - Microsoft Answers

A. Click on Start and click on Control panel.
B. Go to Program and Features.
C. Scroll down to Microsoft.Net Framework 4 Client Profile, right click it.
D. It will give you a choice of Uninstall/Change, click it.
E. Then, it will give a choice to Repair it, pick Repair it. It will take about 4-10 minutes to repair (with my PC) your experience may vary.
F. When completed, go to your update center, and update it again.

Read other 5 answers

I was running a number of automatic updates, most of them installed, "Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista, and Windows Server 2008 x86 (KB2698023)" did not. I just keep receiving "Error Code: 0x643".So far I've tried a number of fixes to no avail.I cannot really remember the exact links, But I tried two different Microsoft FixIts intended for similar problems:MicrosoftFixit.wu.LB.23276429008175881.2.1.RunMicrosoftFixit.ProgramInstallUninstall.MATSKB.RunI've also tried Miscrosoft's NetFxRepairTool.And finally I tried installing the newest version of Windows Installer and getting the file manually, but when I go to install "NDP1.1sp1-KB2698023-X86" it just keeps telling me "The feature you are trying to use is on a network service that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'netfx.msi' in the box below." and it shows me this box where I can browse for a location. I have no idea what the location would be, or even if what it wants is actually on this computer.On a side note. I've been having this message pop up in my browser allot lately: "Security Warning. Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party. Are you sure you want to continue sending this information?" Mostly, if not only... Read more

A:Cannot install Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP (KB2698023)

Download the KB2698023 to desktop and try to install from there -Next run the automated troubleshooter in this KB article from start to finish, reboot & see if the update will install:? How to fix MSI software update registration corruption issueshttp://support.microsoft.com/kb/971187If no joy, see...? You receive ?0x80070643? or ?0x643? error codes when you try to install .NET Framework updates through Windows Update or Microsoft Updateshttp://support.microsoft.com/kb/976982Now try the first link again -If these are the ones you have used, please post back and we can look for other ways to install -

Read other 14 answers

Get Code 800B0100 Windows update encountered an unknown error
Found https://answers.microsoft.com/en-us/windows/forum/windows_7-update/failed-to-install-security-update-for-net/e2db6092-c870-e011-8dfc-68b599b31bf5?auth=1
Method 1:
You may also try to download the standalone package from the below link and check if the issue persists.

Only got the update is not for this computer. 

Looked at
Method 2:
You may also try to download the updates in clean boot state and check if that helps in resolving the issue.
Putting your system in clean boot state helps in identifying if any third party applications or startup items are causing the issue. If yes, you may have to contact the program manufacturer for any updates or uninstall and re-install the program.
Refer the following Microsoft KB article for more information on how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

After troubleshooting, make sure to put the computer to start as usual as mentioned in Step 7 in the above KB article
But none of the non-Microsoft could be disabled ex Symantec, Adobe Reader and flash. 
Tried Malwarebytes and it did not find anything. 

Read other answers

Hi I tried twice today to download and install the following updates, Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86. it is a large update taking approx 30mins to download the 248MB package. Both times it got to the end of the download and the next I got was a message saying installation failed. At first I thought it was Comodo BoClean so turned it off the second time but got the same result anyway.
My PC is an AMD Athlon XP2400+, 1GB of RAM running on XP3 and updated via Automatic Updates "notify but do not install". I got a MSN email notification on IE8 RC1 and decided to check my Firewall connection to Microsoft Update, where I was told that the mentioned updates were available and decided to install them though not IE8 at this time.

For real time protection I use Comodo CIS, Comodo BoClean and SpywareBlaster. I switched off BoClean the second time and set CIS to installation mode both times. I cannot see anything else on my PC which could hinder the installation process. In my Add/Remove program list I have Microsoft .NET Framework versions 1.1,1.1 Hotfix, 2.0 Service Pack1, 3.0 Service Pack1, 3.5, Should I uninstall these before installing the latest version or should they all remain on my installed programs?. I would appreciate it if someone could offer some help here as I like to keep my PC up to date.

A:Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86

Hi .Well...let's start with the reason you have MS .NET installed on your system.What applications/drivers do you use which require any version?If you have no such applications...IMO it's not even necessary to install any version of MS .NET on a system. Doing so is a waste of time for those who don't have applications which demand MS .NET.http://forums.techarena.in/customize-xp/866859.htmLouis

Read other 8 answers

I haven't downloaded this update as I have dial-up and it says 26-48 hours to update this. Also, I had to reformat my computer three times with the SP3, even downloading from disk instead of internet - so scared to download Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86 as don't want to have to reformat (and also don't want my computer running for 2-3 days to download).
Are there problems with this download like there were with SP3 (I ended up never being able to have a working computer with SP3)? Do I need this update? Will there be problems if I download from internet, and if not any other ways to update this (for free)?
Thank you.

Read other answers


I have an update which refuses to install:

Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2742599)
Download size: 8.0 MB
You may need to restart your computer for this update to take effect.
Update type: Important
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and gain control over it. You can help protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.
More information:
MS13-004: Description of the security update for the .NET Framework 3.5.1 on Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1: January 8, 2013

The installation keeps failing due to uknown error with a code: 800B0100

1. System Update Readiness Tool - every run it succesfully installs one update, but nothing changes, Security Update for Microsoft .NET Framework stays uninstalled.

2. SFC Scan - Windows Resource Protection did not find any integrity violations

3. Error Code - 800B0100

4. Logs - I couldn't attach the whole CBS file, because
"500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed."
However I uploaded CBS file on sendspace: Download CBS.zip from Sendspace.com - send big files the easy way
If the CheckSUR.log file is the only one needed, you can find it attached below

5. Additional ... Read more

A:Cannot install "Security Update for Microsoft .NET Framework 3.5.1"

I downloaded and installed this update manually and it helped... So solved I guess.

Read other 1 answers

Error(s) found:
"Code 80070663 windows updater encountered an known error" when I
tried to update microsoft .net framework 3.5 family update (kb959209) x86 for windows vista 32 bit.

What should I do? I have tried to install this update many times but still getting same error. Thanks in advance for help.


A:error code 80070663 when I tried to update microsoft .net framework 3.5 family update


You didn't say, so I'll ask, have you done the net3.5 Service Pack 1 update?

Read other 15 answers

Recently Microsoft released this update:

"Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86
Download size: 248.4 MB , 40 minutes
Microsoft .NET Framework 3.5 Service Pack 1 is a full cumulative update that contains many new features building incrementally upon .NET Framework 2.0, 3.0, 3.5, and includes cumulative servicing updates to the .NET Framework 2.0 and .NET Framework 3.0 subcomponents. The .NET Framework 3.5 Family Update provides important application compatibility updates."

There has been some discussion online as to whether this update is necessary for standalone home computers like mine (XP Home SP3).

Please let me know what you think about the need to install this update.

A:Microsoft .NET Framework 3.5 SP1 update

Do you run any application that require .net? And of those, do any specifically ask for .net 3.5 SP1? That probably gives you your answer.

Read other 3 answers

My Dell Support Center has an alert in it saying that it recommends that I keep my system up-to-date with the latest Microsoft .NET Framework 2.0 update for my PC.

I don't know anything about this .NET Framework thing...so my question is....Is it a must that I upgrade to this? And if I do, will it be easy to do? Will it change my system in any kind of way?

I have Windows XP Professional Version 2002 Service Pack 2.

A:Microsoft .NET Framework 2.0 update?

You should make all your Windows Updates, including SP3 and .NET Framework.

Read other 1 answers

Hey all,

Been reading this site for a while, and it's incredibly amazing! I was wondering if you could help me with this...

I reformatted my system, and installed Windows XP Professional Corporate with SP2 slipstreamed.

When trying to install either .net framework package (1.1 or 2.0) the installer crashes when accessing InstMsiw.exe

And says...

IExpress setup has encountered a problem... etc.

Error signature:
EventType : InPageError P1 : c000009c P2 : 00000003

And error report contents:

It's the redistributable downloaded from the Microsoft website, and the Windows Update method has the same problem.

I couldn't find anything on the net about this problem. It seems as if the installer package is corrupted (winrar says as much when I try to decompress), but it came right from M$.

Any ideas?

A:Microsoft .NET Framework Won't Install!

Read other 7 answers

I always get stuck at a certain point in the installation of framework.

Solution please?

A:Cant install Microsoft net framework 2.0


Read other 6 answers

I have a recent Dell laptop with 3.49GB of RAM and over 100gb of hard drive space. It is also 1.4ghz. I have installed NERO 9 but it is telling me that I need microsoft net framework 3.0 or greater. So I keep downloading microsoft 3.5 framework and when I try to install, it is unable to. When I get to the download and install Progress it is not able to establish connection with the server. So after 5 tries it gives me an error message saying that it was unable to install it. What is the problem???
I even restart my computer and still the same problem. The same problem happens with microsoft net framework 3.0 too.
Can anyone help me.
It says that setup cannot download all the necessary files.


A:Why can't I install Microsoft Net 3.0 or 3.5 framework on my pc?

Go to the MS website, download the standalone install package of .net 3.0 or 3.5 and run the install package off your own hard drive. .Net 3.5 full version is available at this link.

Read other 5 answers

My Windows XP automatic update feature on my laptop keeps trying to install "Update to .NET Framework 3.5 Service Pack 1 for the .NET Framework Assistant 1.0 x86 (KB963707)" but each time it fails. Anyone know why and/or how to fix this problem?

A:Failed Microsoft .NET Framework update

The current version of the .NET Framework assistant is 1.1. You might want to update that first.
In Firefox, Tools | Add-ons, click Find Updates.

you might find this thread useful as well:

Read other 3 answers

Windows Update decided I needed to install "Security Update for Microsoft.NET Framework, Version 1.1 Service Pack 1 (KB929729)." The update was released July 10 and has failed to install numerous times. I was under the inpression Vista already had Version 2.0, so I am baffled why it wants to install a 1.1 update, and my update history lists that "Security Update for Microsoft.NET Framework, Version 2.0 (KB929916)" was successfully installed on July 10.

Can I make Vista recognize I don't need the V1.1 service pack so it stops trying to install or, if it is needed, can I make it complete the install?

Dell PC
Dual Core Processer
Built Dec. 2006
Originally XP, Service Pack 2
Upgraded to Vista soon after Vista Release

A:Update Microsoft.net Framework, Version 1.1

As I understand it, the .NET versions are separate and standalone. You should have Vs 1.1 plus a Hotfix, Vs 2.0, and as you have Vista you should also have Vs 3.

MS offers free help for critical update problems, so I would be inclined to check there first. If you don't get any joy, come back and I'm sure someone will be able to assist you.


Read other 2 answers

every time i try to install. it states that there has been an installation error whilst installing and installed files will be uninstalled. then it starts asking for disk 1????? any ideas

Read other answers

First let me say that if I posted this in the wrong forum, I apologize. Just new to this

Computer: Dell Optiplex GX270
CPU: Intel Pentium 4 CPU 3.00GHz
Op System: Windows XP Home SP3 5.1.2600(Retail)
Total Mem: 2GB
HDD: 40G internal, 80G External

I've spent the last 2 days trying to update the .NET Framework from 2.0 to 3.5. I have tried everything in this Microsoft article http://support.microsoft.com/kb/2438651#reso2

I still can't get the .NET framework to update. It downloads but won't install. I'm having other problems that I believe are caused by this same problem but I need to resolve this before I worry about anything else.

I have done a Windows repair from the XP home CD (Retail Version). I didn't use the console. At setup I clicked on the R to repair Windows. I have tried so many things that I can't remember all of them. I also tried to uninstall .NET Framework 2.0 Service Pack 2 using the add remove programs and receive the following message: Microsoft .NET framework 2.0 Service Pack 2 cannot be uninstalled because it will affect other applications that are installed. For more information, see http://go.microsoft.com/fwlink/?LinkId=91126 I've tried everything on that page as well. I tried to reinstall 2.0 again from a stand alone copy from Microsoft and got the following message:
Setup cannot continue because this version of the .NET Framework is incompatible with a previously installed one. For more information, see http://support.... Read more

A:Microsoft .NET Framework 3.5 Install failed

If you have 4.0 installed, what's the reason for now installing 3.5, SP1?

Frankly, I have 3.5, SP1 and 4.0 both installed on this system, with no problems...while I have installed 3.5, SP1 on my other system.

I suggest uninstalling all versions currently on your system, using the tool located at http://cid-27e6a35d1a492af7.skydrive.live.com/self.aspx/Blog_Tools/dotnetfx_cleanup_tool.zip .

Then I would install 3.5, SP1.


Read other 3 answers

When attempting to install the .Net Framework: I received the following message:
“Microsoft .Net Framework 2.0 has encountered a problem during setup. Setup did not complete correctly.”

Another dialogue box then indicated:
Patch packet could not be opened. Verify that the patch packet exists or that you can access it or contact the application vendor that this is a valid windows installer patch

I then attempted to run the Windows Update. Instead of installing, an error message indicated that some of the updates were not installed:
Microsoft .Net Framework 2.0 Service Pack 1 (KB110806)

Therefore, I am unable to install Microsoft business contacts, Microsoft accounting 2008 and more. Plz advise

A:unable to install Microsoft's .net framework

Read other 6 answers

I tried to install (repair) Microsoft .NET Framework 2.0 but halfway through the installation I get this error message:

'Error 25013.Failed to install assembly 'C:\WINDOWS\Microsoft.NET\Framework\V2.0.50727\System.Data.dll' because strong name signature could not be verified. Was the assembly built delay-signed?'

I'm clueless as to what this means.

Any help is greatly appreciated!

A:Microsoft .NET Framework 2.0 install problem

Please have a look if this helps you, and post back how it went:
How to troubleshoot Microsoft .NET Framework 2.0 installation issues

Read other 3 answers

Ok, I have a computer that at one time must have had the .net framework installed, but for some reason no longer does. I am trying to install 1.1 which is needed for another software program to run correctly.

I have the dotnetfx.exe file and when I run the program it goes through the installation process, until Registering SystemEnterprise.Services.dll. Then the computer just hangs - no error message, no alt-ctrl-del, nada.

I have tried everything I know, plus everything I can find on the microsoft support site http://support.microsoft.com/kb/824643/?FR=1. The only steps that I cannot do or have questions about are
#3 - there's a registry key for.NETframework, but not either of those specified.
#4 - I can't figure out a quick way to download the msizap.exe utility

Any help and suggestions would be more than welcome!

A:Cannot install/reinstall Microsoft.NET Framework 1.1

Read other 8 answers

For several months, I have trying to install Microsoft.Net Framework 1.1 SP1 Security Update for Windows 2000 & XP (KB979906). How can I resolve this issue?


A:Unable to install Microsoft.NET Framework 1.1

Do you need it ? If not, I'd just turn it off. Troubleshooting .NET is a mess. It's not like standard programs that you can simply Add/Remove.

If you need it, want to learn, or are very stubborn, try this:


Read other 2 answers

This is my first post so im sorry if i dont give much details about my problem.

Im trying to install Microsoft XNA Framework Redistributable 3.1, but every time i open it up i get a message pop up saying "Microsoft XNA Framework Redistributable 3.1 requires at least .NET Framework 2.0", but that is not true, i have .NET Framework 3.5 sp1 installed. So i uninstalled .Net Framework 3.5, then re-installed it then tried to installed XNA 3.1 again, but it popped up again.

I have searched many sites for help before i posted this and no one seems to have my specific problem, im completely out of ideas, i have run every repair tool of .NET framework from Microsoft's site and it does not work either, please someone help me with my problem.

Im running windows vista 32 bit.

A:Cant install Microsoft XNA Framework Redistributable 3.1.

Try this: Cant install Microsoft XNA Framework Redistributable 3.1. - Microsoft Answers

Read other 1 answers

I am unable to update the Kernel-mode driver framework ver 1.11 for windows 7 for x64-based systems (KB2685811). I get error: 80073712

Also, I am getting BSOD/stop errors in normal mode that say anything from:

-memory_management 0x0000000001a,

- "A device driver attempting to corrupt the system has been caught. The faulty driver currently being on the kernel stack must be replaced with a working version." GDRO.sys-
address fffff88000626a8f9, base at fffff88006269000, datestamp 49b9d125

I'm not sure if they are related.

When I run in safemode I do not get the BSOD. When in normal mode I will get BSOD consistently when running Norton Full System Scan, specifically when the full system scan gets to the Windows/system32 folder.

System specs:
Processor: Intel 2500K Core Duo Unleashed
MOBO: Gigabyte GA-p67A-UD3P
RAM: I have 4x4 Corsair Vengeance, only using 1 stick of 4GB corsair vengeance currently due to troubleshooting.
HDDs:Intel 180GB SSD and Western Digital Caviar Black 1.0 TB (empty)
PSU: corsair 750 watt
Soundcard: MOBO

When I canoo

A:Unable to install Windows Update: Update Kernel-mode driver framework

I, again, apologize for double posting. I figure I should include the host of other issues I'm having. Maybe they can all be inter related.

-my DVD/RW drive, when connected to mother board in ANY SATA slot, causes the BIOS screen to freeze forever. I have disconnected the drive at this time while trouble shooting. I have tried known-good SATA cables so I know it's either the DVD/RW drive or perhaps a driver or mobo failure.

-I have run the memory diagnostic tool in windows. No issues were reported.

-I have NOT run memtest86 because I do not have a disk drive connected.

-I have had stop-errors (BSODS) such as PFN_list_corrupt, System_service_Exception, Memory_management, IRQ_not_less_or_Equal
All of these could be a result of bad RAM.

I have purchased new RAM as a means to fix my problems. It seemed to work for 2 weeks, then the stop errors returned.

Read other 9 answers

XP keeps trying to install a security patch over and over again on start up, but fails with this message:Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista, and Windows Server 2008 x86 (KB2698023)How do I fix this?(XP SP3. Virus/Firewall disabled during install)

A:Security Update for Microsoft .NET Framework 1.1 SP1 fails

This fix seems to have worked for many

Install the latest version of windows installer from here


Download and install KB2698023 manually.

Read other 4 answers


I am currently having issues with updates on my windows 7 x64 system sp1. It all started when I tried getting the 'Get Windows 10 App'. I tried everything and for some reason my computer won't download it. It said my system isn't up-to-date even though I have the computer set to install all updates. The only update it won't install is the Microsoft NET Framework 4.5.2. I tried over and over again and looked for some solutions online but yet to no avail. I downloaded the Windows Update Troubleshooter and it fixed several problems but the one it wont fix is the Windows Update Error 0x80070057(2015-09-19-T-09_20_46A)

I have tried several solutions online:
1.) Tried to download the System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) to fix the 0x80070057 error but it doesn't seem to install (it says failed under updates and it just sits there 'Installing Hotfix for Windows (KB947821) (update 1 of 1)...'). Checked the CheckSUR log which states the following:

Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2015-09-19 07:15

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store

Seconds executed: 1719
No errors detected

2.) Tried to manually reset Windows Update components but didn't seem to make a difference. I no... Read more

Read other answers

this all started november 2012 where every time i tried to run updates the net framework 4 kept failing

since then all other updates have been sucessful except this one
all i get is "error code 643" and there is barely any help online about this
Does anyone know how to fix this?
its getting annoying now having to "Ctrl Alt Del" then shut down without installing

i have uploaded a screen print showing the ones i am talking about and the error code

i have tried the windows fix it application that your linied to when clicking that link but it did nothing

running Windows 8 btw

A:Microsoft .Net Framework 4 Security Update Failing

Hi see the posts and links here Solved Windows Update Error Codes 64C and 643 - Windows 7 Help Forums they may help

Read other 1 answers


Recently i discovered a series of numbered folders on my C drive. I've concluded that they are from failed attempts at installing the updates for Microsoft .NET Framework 4. I've tried running the microsoft fixit program... i've also gone to the control panel and tried to repair the Microsoft .NET Framework 4 program but received the following "fatal error during installation" report, that it could not be fixed. How do i fix Microsoft .NET Framework 4? I'm not very computer savvy when it comes to this sort of technical stuff...i've read something about having to uninstall all versions of Microsoft .NET Framework which apparently is a tedious process that I'd like to avoid if at all possible. Also my computer won't let me delete the random numbered folders its creating on my hard drive even though I'm the only administrator on this computer and i actually have all my user controls turned off at the moment. thanks in advance....


OS Version = 6.0.6002, Platform 2, Service Pack 2
OS Description = Vista - x86 Home Premium Edition Service Pack 2
CommandLine = "C:\Windows\Microsoft.NET\Framework\v4.0.30319\SetupCache\Client\Setup.exe" /repair /x86 /parameterfolder Client
TimeZone = W. Europe Standard Time
Initial LCID = 1033
Using Simultaneous Download and Install mechanism
Operation: Repairing
Package Name ... Read more

A:unable to repair/update Microsoft .NET Framework 4

Read other 16 answers

This has been going on for around 2 months and I still cannot fix it. Whenever I try to install a .NET framework version, it always fails to install, whether it's from Windows Updates, or the Microsoft website. I've looked all over to find a solution, and another forum said reinstalling it should help, but it only made it somewhat worse, since 2 of my games requires .NET framework (Space Engineers and Medieval Engineers). So now I don't have .NET and I can't install it. This is the error log I got from trying to install the offline version from the Microsoft website

OS Version = 6.1.7601, SP = 1.0, Platform 2, Service Pack 1
OS Description = Windows 7 - x64 Home Premium Edition Service Pack 1
MSI = 5.0.7601.18896
Windows version = amd64_windowsfoundation_31bf3856ad364e35_6.1.7601.17514_none_615fdfe2a739474c.manifest
Windows servicing = 6.1.7601.18766
CommandLine = C:\3b2dc8df05877f57221af0b5\\Setup.exe /x86 /x64 /redist
TimeZone = Eastern Daylight Time
Initial LCID = 1033
Using Simultaneous Download and Install mechanism
Operation: Installing
Package Name = Microsoft .NET Framework 4.5.2 Setup
Package Version = 4.5.51209
User Experience Data Collection Policy: Disabled
Number of applicable items: 11
Exe (C:\3b2dc8df05877f57221af0b5\SetupUtility.exe) succeeded.
Exe Log File: dd_SetupUtility.txt
ServiceControl operation succeeded!
ServiceControl operation succeeded!
Exe (C:\3b2dc8df05877f57221af0b5\SetupUtility.exe) succeeded.
Exe Log File: dd_SetupUtility... Read more

Read other answers

I've tried to install Microsoft .Net Framework updates for several weeks now, but all but "Update 5 of 7" fail. I know these updates are important to my security, so does anyone have a solution?

A:Microsoft .NET Framework updates fail to install

.NET Framework is different from other apps. You may or may not need the different versions if they are required by an app. The problem users have is when you uninstall an app that uses .NET Framework, the app leaves .NET Framework behind. To fix this, open Add/Remove Programs and attempt to remove all versions of .NET Framework. If a version can't be removed, leave it alone. That means you need it. After removing all .NET Framework versions, run the cleanup tool at the link below. That should get rid of the updates. You shouldn't need to reinstall the removed versions of .NET Framework.

Read other 11 answers

This appears to be a language pack error. Failed to update error 00000002 What is that even mean? I typed in this error code here and get no matched results 130 views so far and no one has any idea? HeLp? And thank you!

A:Security Update for Microsoft .NET Framework 1.1 SP1 Failed error 2

try to disable the firewall, check if there is any other security software , you should not have more than 1 security software. email me if the problem persist again

Read other 3 answers

Security Update for Microsoft .NET Framework, Version 2.0 (KB922770)

This "update" has installed itself at least a dozen times. Each time it says it has successfully installed. (no reboot necessary) Then about 5 minutes later I get the icon showing "Updates are ready for your computer. Click here to install these updates." and it is the SAME one again!!

Any ideas what it going on?

A:Security Update for Microsoft .NET Framework, Version 2.0 (KB922770)

Just wanted to add, I have rebooted my PC (even though it did not say to) but this same "update" shows up again & again

Read other 1 answers

I've been having problems for the past month with .dll files claiming to be missing and it's completely messed up my system, I'm unable to use any function of windows media viewer/player, almost no games on steam work anymore either.

I looked around for ages and tried as much as I could and not a single thing worked, then a few weeks ago I stumbled across my windows update history and found out these updates have continuously failed (Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Vista, Server 2008, Server 2008 R2 x64).

I've seen a very similar post made by nimanouri here about 3 months ago but I'm not entirely sure if my issues are the same, I've run the sfc /scannow and received the message "Windows Resource Protection found some corrupt files but was unable to fix some of them"

I've attached the CBS log file
Thx for any help people can give

A:Windows update error code 2 for Microsoft.NET Framework 4.5,4.5.1...

Here's the error list from the SFC scan...

Line 81478: 2015-06-19 22:00:22, Info CSI 00000546 [SR] Repairing 17 (0x0000000000000011) components
Line 81479: 2015-06-19 22:00:22, Info CSI 00000547 [SR] Beginning Verify and Repair transaction
Line 81480: 2015-06-19 22:00:22, Info CSI 00000548 [SR] Cannot repair member file [l:56{28}]"sRGB Color Space Profile.icm" of Microsoft-Windows-ICM-Profiles, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 81481: 2015-06-19 22:00:22, Info CSI 00000549 [SR] Cannot repair member file [l:18{9}]"RSWOP.icm" of Microsoft-Windows-ICM-Profiles, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Line 81482: 2015-06-19 22:00:22, Info CSI 0000054a [SR] Cannot repair member file [l:22{11}]"wscRGB.cdmp" of Microsoft-Windows-ICM-Profiles, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, fil... Read more

Read other 9 answers

I have tried to install this dozens of times, and automatic updates keeps downloading it over and over again, but "Microsoft .NET Framework 2.0 Service Pack 1 (KB110806)" always fails to install.

I am forced to turn of XP automatic updates.

A:Cant install Microsoft .NET Framework 2.0 Service Pack 1 (KB110806)

Same here, on 2 XP rigs, one XPP & one XPMCE. I was able to successfully install .NET 3.5 (http://www.microsoft.com/downloads/details.aspx?FamilyID=333325FD-AE52-4E35-B531-508D977D32A6) using the distributable but .NET 2.0 & 2.0 SP1 still do not show up in Add/Remove Programs. Not sure whether I have a problem now or not. Not having any apparent .NET-related issues, best I can tell.

Read other 1 answers

Hello everyone!

I guess my luck ran out. So I am back on here to find out if anyone can help me. My problem is I tried to download the update:
Microsoft .NET Framework 3.5 Service Pack 1 and Microsoft Framework 3.5 Family Update (KB951847) x86.
At first it downloaded fine, I restarted my computer to install it, it installed fine. Then it restated Showing 2 of 3 stages of updates then My computer automatically restarted showed 3 of 3 stages of updates, Then I got a black screen which showed; I do not know if it was showing how many files indexed or filed, or configured out of a total number or what, then the computer restarted again and then I got the following message: "Updates were not configured correctly. Reverting changes. Do not turn off your computer." Then the computer restarted again and went through the normal starting procedures.

I have already gone to Microsoft with this and have tried what they suggested and nothing worked so far. I keep getting the same results as above. They have had me try to manually install the programs individually. But that has not work so far. They have had me clean up and uninstall all .NET files and programs but I have found the following:
Hotfix for Microsoft .NET Framework 3.5 SP1 (KB9584...
Hotfix for Microsoft .NET Framework 3.5 SP1 (KB9535...

I could not see the numbers that followed after (KB9584 and (KB9535. Plus that is how it showed up on my Installed Programs and Updates lists.

Has anyone else had this pr... Read more

A:Microsoft .NET Framework 3.5 Service Pack 1 and Family update (KB951847)

I wonder if this is related to my problem: http://www.bleepingcomputer.com/forums/ind...=203549&hl=In the last couple days, .net and c+++ items have been subjects of my problem. This all started after the february 2009 patch tuesday last week.I further suspect .net as on the Security Now podcast, Steve Gibson mentioned a .net glob of 250 megs was involved in the patch. listen to the first few minutes, and he mentions it, but nothing about the patch breaking anything."Then the big mother was a .NET Framework update. And it's 250MB." he says. http://www.grc.com/sn/sn-183.txtnot to dual post, I'll get back to researching my problem, now that I have a desktop back, I need to try other things to fix the side by side error.Good luck.

Read other 2 answers

I keep installing the following update and it says it installs successfully but then keeps wanting to install it every time I reboot. Any fixes?

Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x86 (KB2478663)
Installation date: ‎7/‎15/‎2011 9:32 AM
Installation status: Successful
Update type: Important
A security issue has been identified that could allow an attacker to compromise your Windows-based system that is running the Microsoft .NET Framework and gain complete control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
Help and Support:

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 2939 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1341 Mb
Hard Drives: C: Total - 294694 MB, Free - 146962 MB; G: Total - 238414 MB, Free - 166866 MB;
Motherboard: TOSHIBA, Portable PC, Base Board Version, Base Board Serial Number
Antivirus: Webroot AntiVirus with Spy Sweeper, Not Updated

A:Problems with Security Update for Microsoft .NET Framework 4 on Windows 7 (KB2478663)

Have you tried downloading the patch directly from Microsoft? Save it to your hard drive and then run it.
PS. You'll want the last of the three download links which has the text NDP40-KB2478663-x86.exe. The others are for different types of processor from yours.

Read other 2 answers

Whenever I try to put my computer in Sleep Mode i get this pop up and the computer wont sleep

"The Service 'Microsoft .Net Framework v1.1.4322 Update' is preventing the machine from entering standby. Try stopping this service and try again."

What is that and why cant it go away??

Read other answers


I've had great success with you folks in the past removing viruses and with increasing my system response time and I would like to ask for your assistance once again.

I was having trouble installing the new MS update KB922770 earlier this week.
I had this problem in the past and it was resolved by deleting the .NET Framework 2.0, reinstalling it then installing the update.

Now when I try to reinstall the .NET Framework 2.0 I get the message:
C:\Documents and Settings\Beau McCrury\Desktop\.Netfx.exe is not a valid WIN32 application.

I don't know what this error message means and consequently I'm not sure what to do next. Would you please advise me on how I should proceed?

Beau McCrury

A:Unable To Reinstall Microsoft .NET Framework Version 2.0 And Update KB922770

Hi beaumac

Quick Fix Try:
1) Make sure that Update KB922770 is not present, and if it is, uninstall it [Add-Remove Programs in Control Panel]
2) Try deleting whatever .NET 2.0 download you currently have, and use this link to download a fresh copy --- http://download.microsoft.com/downlo...a/dotnetfx.exe
3) If .NET 2.0 installs successfully, you can then reboot, and try another visit to Windows Update to see if the patch now installs OK.

The error you were receiving can sometimes be generated (humorously enough) when the 64-bit version of .NET is accidentally downloaded and it's installer run [the error message is konked a bit, because 32-bit Windows gets a bit dizzy when fed 64bit code].

See if that helps
. . . Gary

Read other 7 answers

I keep trying to install the update Microsoft .NET Framework 1.1 Service Pack 1. It continues to tell me that it has failed to install. Can anyone help me? Thanks in advance!

A:Solved: Microsoft .NET Framework 1.1 Service Pack 1 failed to install

Read other 6 answers

On my active application tab it says a new update is available, now for the past 4 times I've tried downloading or updating this I get Update failed Microsoft .NET Framework 1.1 Service Pack 1

Installation date: ‎11/‎30/‎2007 3:24 PM

Installation status: Failed

Error details: Code 80070002

Update type: Important

Microsoft .NET Framework 1.1 Service Pack 1 resolves various issues found after the initial release of .NET Framework 1.1. These include both security- and non-security-related issues. After you install this item, you may have to restart your computer. Once you have installed this item, it cannot be removed.

More information:

Help and Support:

Read other answers

My PC keeps trying to install the .Net Framework 1.1 update (KB953297) but it keeps failing. The Update is it says that fails is:
Microsoft .NET Framework 1.1 Service Pack 1 Security Update for Windows 2000, Windows XP, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2 (KB953297)

I recently cleaned some malware, rootkit and hijacker stuff off my PC, so I'm not sure if that could have caused this update to keep failing.

Note: I know there are newer version of the .Net Framework but my PC doesn't seem to have them installed (my Add/Remove programs only shows the Microsoft .Net Framework 1.1. However, I do remember it showing the 2.0 and the 3.X (can't remember if it was 3.0 or 3.5) before. I ran a dotnetfx.exe (from microsoft) that removed all the .Net stuff from my PC, so it removed all versions. Since then, automatic updates isn't picking up the other .Net Framework versions (it's only finding the 1.1 version update).

Anyone have any thoughts on how to get this update to install? Or do I even need 1.1? Could I just install the newer versions (and if so, how do I do that)?

A:.Net 1.1 Framework update won't install

Re .Net Framework problemsThis topic probably covers all your questionshttp://www.bleepingcomputer.com/forums/t/264765/security-update-kb953297-fails/Worth reading, may help.FYI - The following are now installed on my computer:Version 2.0Version 3.0Version 3.5 SP1Version 1.1 does not seem to be necessary and when it is offeredas an update, if it will not install, you can select 'Don't show this update again'.No program has called for the 1.1 version; until that happens, I regard it as unnecessary.Uninstall other versions first.Install:cumulative update for .net framework 3.5 SP1http://www.microsoft.com/downloads/details...;displaylang=enYou should then update through Windows Update.

Read other 3 answers

The update: Update to .NET Framework 3.5 Service Pack 1 for the .NET Framework Assistant 1.0 x86 (KB963707)

Update type: Important

The update to .NET Framework 3.5 Service Pack 1 for the .NET Framework Assistant 1.0 for Firefox addresses several compatibility issues with version 1.0 of the extension

My OS and protection:
Vista Home Basic
AVG 8.5
This keeps wanting to install and won't. I do not use firefox either. How do I install it or stop it from coming up? I didn't find any solution in the MS website only others with the same problem and no solution.

I've gone into Control panel/programs and features and the program Microsoft.NET Framework 3.5 SP1 was installed 4/13/2009
So it's there to be updated.

Read other answers

Anyone here having probs trying to install this latest update from Microsoft?I'm running Winxp home sp2.The update just sits in my system tray and when i tries to install it it fails.Any answers on this one?

A:Solved: Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1 (KB928366)

Read other 16 answers

i got an update message from windows update to install the following:

Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for .NET versions 2.0 through 3.5 (KB951847) x86

i went to the update site and downloaded from it directly (instead through the automatic update icon/feature)

it downloaded completely but failed on installation.

the error message was:
Suite Integration Toolkit Executable has encountered a problem and needs to close. We are sorry for the inconvenience.
i am uploading/attaching the error report file generated.

i tried this many times, and it failed to install even after restarts.

i have winXP SP2 with all windowXP updates except SP3.

i hope this info is sufficient for you to diagnose what went wrong - with my comp, or with me.

A:HELP! .NET Framework 3.5 update failed to install

FWIW: http://www.google.com/search?hl=en&q=S...mp;oq=&aqi=I guess that I have to ask...if the prompt came via WUS, why didn't you use it?IMO, it's possible you downloaded the wrong package...also possible that the download became corrupt/damaged.You might check Event Viewer for possible related documented errors, How To Use Event Viewer - http://www.bleepingcomputer.com/forums/t/40108/how-to-use-event-viewer/ Louis

Read other 4 answers

Notice it has zero size! unfortunately as it's classed as critical I'm unable to download any other updates until this has been installed, help welcomed

A:MS Net Framework update wont install

Read other 9 answers