Over 1 million tech questions and answers.

Motherboard suggestions for Intel Xeon processor

Q: Motherboard suggestions for Intel Xeon processor

Hi,

I have two Intel Xeon processor (3.06 GHz 3066DP/512/533/1.525v SL6VP) and would like to know the motherboards that support this processor. Any suggestion for a dual processor motherboard is greatly appreciated. Thanks.

kev

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Motherboard suggestions for Intel Xeon processor

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 83.2

I am considering an Dell Precison 64-bit workstation with an Intel Xeon Processor. I would like to know whether the Floating-Point Unit (FPU) is 64-bits. I have Googled on the web and searched on the Intel web site and cannot find the answer.

Thanks,

WWBD -
 

A:Intel Xeon Processor FPU precision

I suggest that you contact Dell about this. I bet they are much better about answering questions BEFORE you buy than AFTER.
 

Read other 2 answers
RELEVANCY SCORE 81.6

So the Intel Xeon E3-1535M v6 Processor got 16 PCIe Lanes, The P5000 (as equipt in my config) consumes 16 I would say.....right so doed that mean that the attacherd M.2 Drives run on the reg. SATA bus? If so that bottle necks the performance.Does somebody know the MB config????

Read other answers
RELEVANCY SCORE 72

Hi All,

I have a dual socket motherboad with chipset 5000.

I currently have 2 unit of Xepon Processor (X5450, E5450)

My question is, can i insert both processor in the motherboard to use? is it compatible?

Thank you

Regards
Jacky
 

Read other answers
RELEVANCY SCORE 70

I'm looking to replace the logic board in my desktop system with a PCI Express-capable model. The current logic board is an Asus P4C800-E with a 3.4 ghz P4 CPU.

What I would like is:
1 16x PCI Express slot (two would be better)
at least 4 other PCI slots
USB 2.0
FireWire
Onboard gigabit Ethernet
Has to play well with the current processor

My upper limit is around $250 for the board. Suggestions?
 

A:PCI Express Intel-Compatible Motherboard Suggestions?

A socket 478 p4 board with pci-e is not too common.
I also doubt you'll find one with 4 pci slots as well(although they have some pci-e x1 slots too).
Here're two I could find w/ pci-e and socket 478.
http://www.newegg.com/Product/Product.asp?Item=N82E16813157075
http://www.newegg.com/Product/Product.asp?Item=N82E16813170143
After looking at both, I'd definitely go with the albatron model of the two, it has 1 more pci slot, and also has full pci express x16(not the asrocks "agi express", which is limited).
The downside to the albatron is that it only has 1 ide port, so you could only have 1 ide hd if you have one cd/dvd drive, or no ide drives if you have 2 cd/dvd drives. It basically means you need to use sata hard drives with the board, (or you'd have to get a pci/pci-e x1 ide controller to add 2 more ide connectors).
http://www.newegg.com/Product/Product.asp?Item=N82E16815150049
^that has 2 ide connectors if you'd need more ide connectors. It also adds usb and firewire.

If you need firewire you can add a card like this(or if you need ide ports and get the above, firewire is already built in).
http://www.newegg.com/Product/Product.asp?Item=N82E1681512400
Or if you don't want to tie up a pci slot, you could get a pci-e x1 model like this.
http://www.buy.com/retail/product.a...rm=10412677&Type=PI&Category=Comp&dcaid=17194

And if you need gigabit ethernet, same situation, you can get pci or pci-e x1.
Here&... Read more

Read other 1 answers
RELEVANCY SCORE 69.6

I bought an old Dell Optiplex 380 system refurbished from Dell for about $80 with an E7500 Intel core 2 duo processor and upgraded it to a Xeon E5430 for about $20. The cpu benchmark went from about 1800 to 4000. The Dell Optiplex 380 uses DDR3 memory, so the Xeon gets an additional boost there. I also downloaded a modded Dell bios that supports the Xeon functions on the 775 motherboard at bios-mods forums for free. Great little computer to play older games in Windows 7. Next I will be updating this system to Windows 10. It came with Windows 7 Home Premium OEM installed by Dell.

So for little cost you can play around with older hardware and make it do things it wasn't originally designed for.

A:Socket 771 Xeon processor in a Socket 775 motherboard

Used little sticker eh ?

Read other 3 answers
RELEVANCY SCORE 68.8

Have a old Intel motherboard and processor, the board is Pentium II and the processor 350 MHz. I have a problem with the processor, it show as a 233 MHz. I took it to vendor he said that the processor is 350 MHz. A memory 128 of ram was put into the board, however, it show as a 96 of ram. How can these problems be fix.

Thanks!
 

A:Intel motherboard & processor

Read other 8 answers
RELEVANCY SCORE 68.8

I'm buying a Intel I7-2600k for my main rig. I was wonder what would be a good board to house it and my 2 6950's 2gb. I do plan on overclocking .. So any board that will allow me to do so easier will be appreciated.

Would like to go no higher then 300$

Thanks in Advance.
 

A:Good mid-range to high-end Intel LGA 1155 motherboard suggestions

The best board I've used thus far -a combination of stability, feature set, ease of use and overclock ability would be the Asus P8Z68 Deluxe/Gen 3. It features a PLX bridge chip which allows use of virtually all features concurrently ( the third PCIe x16 @ x4 isn't downgraded to x1 for instance if you use most/all of the SATA 6Gb/USB3.0 ports).
If you don't need a full-size board then the ASUS Maximus IV Gene-Z/GEN3 at around $180 might make some appeal. Both these boards have no facility for video-out (no onboard HDMI, DP, DVI, D-Sub) - not a great concern for most people looking at Z68 boards.

Word of warning: Z77 boards are reportedly due for release on 8th April. While they will offer very little (if anything) over Z68 boards, it will mean that Z68 board prices will take a nosedive. My advice if you need a board right now and want to save some cash, would be to pick up a functional and well regarded cheap board such as the P8Z68-V/G3 (which still a very nice board) and maybe look to replace it with one of the top-end boards which will surely drop in price. It does mean that you would have the hassle of finding a buyer for a board, but on the plus side you may find yourself happy with the P8Z68-V.

You'll notice that all the selections are Asus based products. Asus -at least for Z68, seems to be putting out the best boards overall. Some other vendors are having QC problems. Gigabyte, which are normally my first choice in mobo making, have some infuria... Read more

Read other 2 answers
RELEVANCY SCORE 68

When it comes to selecting mobo's, I'm not sure what to really buy. I am buying a Intel Pentium 4 / 2.4CGHz 512k socket 478 Hyper Threading Technology 800 MHz FSB .

Can you guys give me some suggestions on a decent mobo?

-I will not be overclocking
-little room for upgrade
-stable board.

THX

~R~
 

A:Suggestions on purchasing stable, proper, motherboard for Intel Pentium 4 / 2.4CGHz

I would go to newegg.com. They have a big selection of mobos there. Asus, Intel, Soyo, Aopen, and Gigabyte all make decent boards. When you go to newegg, click on Computer Hardware and then Shop by Catagory. When you hit Motherboards-Intel, there will be an Advanced Search colum on the left. It's handy for narrowing down what features you want. Since you have limited expansion space you might want to consider things like onboard audio and LAN.
 

Read other 1 answers
RELEVANCY SCORE 67.2

Can you guys help me, what should i buy?
my ram memory is 256mb ddr2 ...
Q:if i buy 2x 2gb ddr2 ram memory pair it will not burn my pc or destroyer?

my motherboard is MS-7507...
Q: can you guys give me a good advice what should i buy that belongs to my pc for gaming only

Processor: x86 Family 6 Model 23 Stepping 6 GenuineIntel ~2520 Mhz

Pentium(R) Dual-Core CPU
E5200 @ 2.50GHz
2.52 GHz, 0.99 GB of RAM

i don't have memory that why ^^,

please... advice what should i buy and i wanna buy a video card but i don't know what should i buy... i'm so newbie at computer ^^, wew.
 

A:My motherboard is M7 & Processor is Intel Dual Core 2

First, what is your budget?

Second, what games would you like to be able to play?

Third, what Operating System are you running: XP or Vista?

Without a doubt you need more memory. 256 is bare minimum to run XP.

* I looked up your motherboard and you can run upt to 4 gigs of memory but only do so if you are running a 64-bit Operating System. You can also run PCI-express video cards.
 

Read other 1 answers
RELEVANCY SCORE 67.2

I have a Gateway Computer Model G6-350. It have a Intel MP440BX motherboard with PhonexBIOS 4.0 Release 6.0 (4M4PB0X1.15A.0033.P21) and Pentium II 350 Processor.

I want to know if this motherboard support Pentium III Processor Slot 1 at 500, 550 or 600 MHZ.

Thanks to anybody.
 

A:Processor Support for Intel 440BX Motherboard

That's a Gateway-specific motherboard, Intel have no information about it on their site. From looking at similar boards you should be able to run a P3-450 (Katmai, not Coppermine), which is what the Intel SE440BX goes up to. I'm assuming you have a very early 440BX board as it came with a P2-350, the first 100MHz FSB processor Intel released.
 

Read other 1 answers
RELEVANCY SCORE 67.2

Hi,
I have an Intel D930 3.0Ghz processor and Intel D945 Motherboard with 3gb ddr2 ram.but recently, my motherbaord got an external damage and thus not working anymore.I contacted intel and they told that such motherboards and processors are not available in market anymore. So, now i need a motherboard which supports my processor and is available in the market for purchase.It should have PCI slots.Please suggest me a compatible motherboard as soon as possible.

Regards,
A.R.Ebhendra.
 

A:Motherboard Supporting Intel D930 processor

All of these boards will support the Pentium D930. The first two will also support some Core 2 Duo and Core Quad processors if you want to upgrade later. 3 of the boards are Micro ATX, and 1 is ATX. The G965WHMKR and G965OTMKR are better boards than are the D945GCPE or the D945GCNL.
Intel BOXDG965OTMKR LGA 775 Intel G965 Express Micro ATX Intel Motherboard - Retail
http://www.newegg.com/Product/Product.aspx?Item=N82E16813121080

Intel BOXDG965WHMKR LGA 775 Intel G965 Express ATX Intel Motherboard - Retail
http://www.newegg.com/Product/Product.aspx?Item=N82E16813121052

Intel BOXD945GCPE LGA 775 Intel 945GC Micro ATX Intel Motherboard - Retail
http://www.newegg.com/Product/Product.aspx?Item=N82E16813121321

Intel BOXD945GCNL LGA 775 Intel 945GC Micro ATX Intel Motherboard - Retail
http://www.newegg.com/Product/Product.aspx?Item=N82E16813121319
 

Read other 3 answers
RELEVANCY SCORE 66.4

I have a p4vxasd2+ motherboard with Intel Celeron 1.7GHZ processor and I'm trying to install it into a tower. I'm running 2 168-pin 128mb sdram chips. Ok I have everything hooked up to it and I turn on the tower. Its starts to boot but right in the middle of the boot sequence it freezes. It never makes it out of the initial boot process before it freezes. Can anyone give me some kind of idea on what to try.
 

A:I have a p4vxasd2+ motherboard with Intel Celeron 1.7GHZ processor

hmmm, remove 1 of ram and make sure the psu is connected to motherboard correctly. i think you should check if it have atx12v plug. please read manual before you answer the post again
 

Read other 1 answers
RELEVANCY SCORE 66.4

Hi all,

As the title says, my question is regarding the use of a combination of the G3258 Intel Pentium processor with Intel HD Graphics and a Z87 motherboard.

The problem is that I can't get it to work. An HDMI cable is used between the computer and the monitor when using Intel HD Graphics. I've tried different HDMI cables to no avail.

Naturally, I've double and triple checked that the internal graphics is enabled in the UEFI. I've tried disabling the graphics card in UEFI hoping to force it to use the processor's graphics capability (Intel HD Graphics) but it won't work like that.

It doesn't turn off and I guess that's a good thing since if neither graphics option would work, I couldn't see to get back in the UEFI to turn it back on.

When the DVI cable is hooked to my video card, it works fine. When I disconnect it and connect the HDMI cable and reboot, there's no video, just a blank screen.

Is it possible that the combination of the processor with graphics and the motherboard I have just won't work together?

I have Windows 7 x64 SP1 with all updates, an EVGA GTX 650 video card, and an EVGA Z87 FTW mobo with Intel G3258 Pentium 3.2GHz CPU which includes Intel HD Graphics.

Thanks for any assistance.

EDIT: @GokAy - Thank you for the tip to reset CMOS in case all video was lost. I guess I was overly tired when I made the post here because I should have thought of a simple thing like that. In fact, the Z87 motherboard has a button on the back of the case to press whe... Read more

A:G3258 Pentium processor, Intel HD Graphics, and Z87 motherboard help

Try changing preferred/primary GPU or such setting in BIOS. If you somehow make any mistakes and left unable to get a display you can reset CMOS (check motherboard manual).

Read other 1 answers
RELEVANCY SCORE 65.6

Anyone HELP me pls.....i have pc Dell Optiplex 775. i want to upgrade proc intel core 2 duo E5450 with proc intel Xeon E5450(hard mod).
Can I upgrade it? is it compatibility with my motherboard?
I read somewhere from the web...that my mobo actually can upgrade with proc intel xeon E5450 (hard mod) but must use  windows xp & upgrade to bios A20.they tell it work with update bios n change intel xeon...
 

1. first method i use, windows xp pro sp3 32bit  +  upgrade bios A19 upgrade A20(change proc xeon but failed) then upgrade to A21(change proc xeon but failed) then upgrade to A22(change proc xeon but failed) in this situation my pc can`t  press the button on/off, & button on/off change to orange colour & fan heat sink switch on automatic...(first method failed)

2. second method i use windows 7 ultimate 64bit  +  upgrade bios A19 upgrade A20(change proc xeon but failed) then upgrade to A21(change proc xeon but failed) then upgrade to A22(change proc xeon but failed) in this situation my pc can`t  press the button on/off, & button on/off change to orange colour & fan heat sink switch on automatic...(second method failed)

A:Can i upgrade proc intel core 2 duo E4500 lga775 to intel xeon e5450 (hard mod) lga771

The response of the system (no-boot with the Xeon CPU aboard) is your answer:  NO.  This system won't take that CPU.
Since the system won't boot with the Xeon CPU aboard, it matters not which OS you plan to run.

Read other 1 answers
RELEVANCY SCORE 64.8

I have running TDA-ThinkorSwim Investing software which experiences periodic performance issues, which reeves the fan or Hard disk then locks up all performance until the TOS performance issue is acknowledged.  TOS uses an internal 7.0 Java.  typical
CPU usage is 30-45% but I have seen CPU surging usage as high as 119% with frequency at 132%.  Processing seems to halt, graphics halt or are severely retarded at best.  Using Speedfan software Seeing CPU temps. peak at 85C or 185F. 

On this higher end and equipped 64 Bit HP Envy Laptop, with a Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz, 2401 Mhz, 4 Core(s), 8 Logical Processor(s) Machine containing an Intel HD Graphics 4600 card.   

any suggestions on how to choke off these problems? 

Read other answers
RELEVANCY SCORE 63.6

I have a new system Intel DG965WH with 1GB and a Core 2 Duo E6300 processor with a WD 320 GB SATA drive. When I start the installation of either XP or Media Version XP they both get to the point of loading in memory the necessary files and when you are prompted for "enter" to continue it resets the machine and you start all over again.

Has any one had experience loading either of these operating systems on to this type of system or perhaps can point me in the right direction as to the problem? Could it be memory? I am using a Kingston KVR667D2N5K2/1G which should be ok for this type of mother board as it is 1.8v memory.

Thanks

A:Windows Xp Or Media Center Edition And Intel Dg965wh Motherboard With Core 2 Duo Processor(6300)

Could be bad RAM, a lot of times it causes that error in the initial file copy from the CD to the hard drive.Memtest is a good diag for memory.http://www.memtest.org/EDIT: You're not just booting from the CD after the computer reboots from the initial setup, are you?The restart after it finishes copying files over is normal, after that it should continue in a VGA setup screen.

Read other 3 answers
RELEVANCY SCORE 63.6

I've been looking for the front panel pin layout on the Dell Dual Xeon Motherboard with Dell P/N: 0WN7Y6 (it is a # zero, W, N, #7, Y, #6). 
The front panel connector is 27-pin...28 spots with one pin left blank. The pin layout isn't included in the manual and I'm trying to boot two of these motherboards without the 27-pin connector. I just need to know which pins need to be jumpered in order to test for boot to BIOS.
Any assistance would be greatly appreciated.
 

A:Dell Motherboard- P/N 0WN7Y6 Dual Xeon Motherboard Front Panel Pin Layout

Dell doesn't make the front panel connector pin-outs public. So unless you map them yourself or somebody else has done it...

Read other 3 answers
RELEVANCY SCORE 62

Hi,
I was thinking about buying Intel Xeon X5355 Quad Core Extreme 2.66GHz processor, but for some reason i thought that if i had an Xeon quad core i have to buy four of them? Is this true? And Would it be any good for video editing?

Thanks
 

A:Xeon Processor

Howdy,

Intel Xeon X5355 Quad Core Extreme is primarily made for servers and workstations.

What do you have now?
 

Read other 1 answers
RELEVANCY SCORE 62

I'm building a new dual processor workstation and I'm trying to find a pair of socket 771 xeon processors that are under $300. I'm looking at the following:

xeon 5120
xeon 5320
xeon 5060

I'm leaning towards the 5320 since they are quads. The 5120 are cheaper but dual cores; the 5060 are higher mhz but have the 667 fsb. Main use if for video and audio capturing/editing in Adobe Premiere. Any suggesions or other choices would be a big help .
 

Read other answers
RELEVANCY SCORE 62

I have a question about Xeon processor's, would it be more efficient to run 3 or 4 processor's in a server, is it better for them to work in tandem?
 

A:Xeon processor

Unless you're going to be running a file server for 100 or more computers using it heavily, I wouldn't go over 2 processors (Athlon MPs aren't extremely expensive, and do the job well). However, I'd set up the network as follows for 50 or less computers:

Dual Processor (doesnt have to be fast) Domain Controller

Dual Processor Domain Controller back up (very important -- it would SUCK to lose all your user names and domain information, and remember, downtime reflects poorly on you)

Dual Processor (faster then others) File Server
And add File Servers as needed. This set up is cost efficient, and if you use RAID 5, you wont lose data if one disk drive goes. You keep the File Servers seperate from domain controllers, and keep everything running well.
So, to answer your question, NO, I do not think anything over 2 processors is needed.
 

Read other 1 answers
RELEVANCY SCORE 61.2

Is it possible to overclock a 2.8 GHz processor and would a high end air cooled system be enough?

I am looking at buying a couple of Xeon systems and wanted to use one as a test subject!!!!

Any thoughts on the performance gains and suggestions welcome!!!

 

Read other answers
RELEVANCY SCORE 61.2

Right now, I have a P4 2.26 GHz processor in my PC that needs replaced. Looking at the motherboard documentation, it says it can accept up to a 3.0Ghz P4 processor with up to 533 MHz system bus.

My question. Is it possible to replace it with, like a 2.8 GHz Xeon processor? Would the performance be that much different? Would it be worth the extra cost? Or, should I just go for a regular P4 processor to replace it?
 

A:Possible to change processor to Xeon?

I believe that going from a P4 to a Xeon, requires a motherboard change.

Duncan Pollock
CompTia A+ Certified
Currently working on Network+
 

Read other 1 answers
RELEVANCY SCORE 60.4

Hi, I was told that P50 with Xeon E3-1535M v5 processor is not available any more. Is this really true? If so, what are the reasons?

A:P50 equiped with Xeon E3-1535M v5 processor not av...

The reason is to reduce the size, and it increase battery life.     You can get an internal optical drive on the P70, but to my knowledge, there is not even room to put an optcical drive on a P50, so I think one fo the dealers is confused. Good Luck   

Read other 1 answers
RELEVANCY SCORE 60.4

Does anyone know the pros and cons of Intel Xeon? What are the differences between P4 and Xeon?
THanks
Jerry
 

A:Intel Xeon

the difference is largely a matter of available funds vs. needs. If money is no object, then go for the Xeon..........
 

Read other 2 answers
RELEVANCY SCORE 59.6

We recently purchased an HP Z440 with a Xeon E5-1650v3 processor for use in out engineering dept. Yesterday we were able to overclock it to 4.2 ghz using the Extreme Tuning Utility. When the user started up this morning, the controls were back to default and some settings are now greyed out. Does anyone know who the OEM for this board is, I want to find an unlocked BIOS and overclock from there. This is info from the motherebaard UPC Sticker:PFDDC0BCY8Z8PU AS#710324-002 Rev 0B  SP#761514-001 No DPK SP#761514-601 W8 PRO  bAR CODE SHOT: https://goo.gl/photos/1i5A1f3Q2ooGPGYp8  This is info from the HP system utilities (Ctrl+shift+s): Model #: HP Z440 WorkstationProduct #: F1M44UT#ABCSerial #: [Personal Information Removed]Software Build #: 14WWZDFW602#SABC#DABCPCBRAND #: HP Model #: HP Z440 WorkstationProduct #: F1M44UT#ABCSerial #: [Personal Information Removed]Software Build #: 14WWZDFW602#SABC#DABCMotherboard: 212BPCBRAND: HP  

A:Overclocking HP Z440 with a Xeon E5-1650v3 processor

The HP Z440 uses a motherboard designed by HP specifically for the Z440.  It is not a third-party board that is sold elsewhere.  The Z440 BIOS was developed by HP specifically for this system.  HP does not support overclocking, since it could potentially reduce the system's design life goals.  




I am an HP Employee.My opinions are my own, and do not express those of HP.

Read other 2 answers
RELEVANCY SCORE 59.6

I do massive SQL queries and run Power BI and Power Pivot and need more memory.  Can this computer support 32 gigs of ram, and any suggestions on brand?  I see some on FRYS.COM for reasonable price.

A:Can the Z230 with Xeon Processor, support 32 gigs of Ram? 4...

@kenab? SFF? Four DIMM slots? Unbuffered ECC/nECC DIMMS only? Maximum capacity: 32 GB Tower? Four DIMM slots? Unbuffered ECC/nECC DIMMS only? Maximum capacity: 32 GB Your manual here. http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=5367825&docLocale=en_US&docId=emr_na-c04... REO

Read other 1 answers
RELEVANCY SCORE 59.6

I am looking to build my own PC as I can't afford 1,000+ to get someone to make one for me, I will be using it for gaming and communication and a little college work, I will probably be using Bullguard to protect it and OpenOffice instead of Microsoft Office with a Win 7 64bit OS.

Bearing this in mind what would be the best Processor for the Intel Core i5 3.4 GHz Quad-Core (BX80637I53570K) Processor and what would be the maximum Memory and Storage I could attach to it? ( I preferably want 8GB of Memory and 1tb of storage ) but I can be flexible.
 

A:What would be the best motherboard for a Intel Core i5 3.4 GHz Quad-Core (BX80637I53570K) Processor?

The CPU you want is the i5 3570K. That runs on the socket LGA 1155. When you are on a budget, any mid range mobo will suit your needs. Use the savings from the mobo towards a better HDD or even an SSD. You will also need a GPU.

I would recommend the ASUS P8Z77-V LK motherboard. As for RAM, 8GB is enough. As for the HDD, 1TB is great. I recommend the WD Caviar Black 1TB HDD.

Make sure you can get in a GPU.
 

Read other 37 answers
RELEVANCY SCORE 59.2

How do i find the driver for Intel(R) Pentium(R) processor N- and J-series / Intel(R) Celeron(R) processor N- and J-series EHCI USB - 0F34

Read other answers
RELEVANCY SCORE 59.2

Hi All
 
I'm not sure that my current Lenovo M83 tiny model 10E9-CTR1WW with Q85 chipset support CPUs other than the CPU data sheet on http://psref.lenovo.com/syspool/Sys/PDF/ThinkCentre/ThinkCentre%20M83%20Tiny/M83%20Tiny.pdf the current CPU shipped with my M83tiny is 4950T, i've checked on ebay there are alot of Intel Haswell XEON with  LGA 1150 that support.
 
I wondered if any one here already upgrade XEON chip and kae with worked without issues, then please share me your experiences on doing it.the one i plan to upgrade is Intel Xeon E3-1275L v3 2.7GHz (3.9GHz) 8MB 5.0GT/s SR1T7 LGA 1150 , or Intel Xeon E3-1240L v3 2.0GHz (3.0GHz) 8MB 5.0GT/s SR1T7 LGA 1150. they seems to be identical physical informations with my current 4590T except 10 watt higherBTW , does the XEON CPU come with integrated video card ?I don't know if i can do this upgrade. Anyone can give me some hints?
 
Many thanks for your help
 
Mod:  edited Subject line to add processor model number













Solved!

Go to Solution.

A:ThinkCentre M83 Tiny: Upgraded processor to Xeon E3 1275L V3 (CPU)

Update:After put the XEON E3 1275L V3 to M83 with latest BIOS update, the M83 recognise the XEON CPU and display correctly on BIOS information.no need to use the 90W power adaptor since the original 65W adaptor is good enough to handle this 45W XEON chip, I do the stress test with seige-win for > 4hours on this M83 tiny with XEON , it did very well job without any sign of exhausted, the benchmark test show it is nearly double compare with the default core i5-4950TNo more hotter than the core i5.I bought the lenovo 90W  power adaptor with 29.99$ on ebay ( may be a fake one from china) but it seem to overheated than the 65W lenovo adaptor, so should not buy this 90W, ( Lenovo sells this at 69,99$ , so take this one if you can)

Read other 1 answers
RELEVANCY SCORE 59.2

Hello everyone. I am a 3D arch viz artist, using 3Ds Max + Vray render. I am looking for additional render power.

My budget is around 2.000 Euros, so I was considering 2 options:

A guy is selling a HP DL580 G7 server, which includes 32 GB ram and 4x Xeon E7540 2 GHz (6-core CPU, based on Nehalem), which is a total of 24 cores / 48 threads.

For the same money, I could buy a 5960X system or 2 systems running a Core i7 4790 CPUs. The hardware in my country is a bit more expensive when compared to USA / EU.

I can't find any benchmarks for the E7540 CPUs, so I am not sure if 4xE7540 would outperform 2 modern 4-core Core i7 CPUs (like the 4790K). That would be 24cores vs 8 cores / 48 threads vs 16 threads.

Vray render uses all of the available CPU cores, no limit there.
 

A:4 x Xeon E7540 vs Intel 5960X

The 5960X system, if for the same money would be the best buy.
 

Read other 2 answers
RELEVANCY SCORE 59.2

How Intel Xeon Processors are different from Desktop Computer Processors like Core2Duo?

How a Server processor performs different from desktop processor of same clock speed?

I am planning to purchase a new computer.

The computer will be used for :

Data Mining.
Web Development
Software Development
Flash/Flex/AIR/Photoshop Work.
Graphic Designing Work(I need better monitor)

Additionally it will be used for software testing and doing experiments with them therefore Virtualization Software(VMWare/Virtual PC) will be also used.

I am not sure what should I purchase? A desktop pc Or a Workstation Computer like Dell Precision?

Workstation computers are very costly.

Please give some suggestions.

This is what I configured Dell Precision 3500
Code:

PROCESSOR Intel(R) Xeon(R) W3520 2.66GHz/8MB L3 Cache/4.8GT/s
OPERATING SYSTEM Genuine Windows(R) 7 Professional 64bit (English)t
CHASSIS ORIENTATION Minitower Orientation with 1394 Port
MONITOR Dell(TM) 2408WFP UltraSharp(TM)24"Widescreen Flat Panel LCD Monitor(Analog&DVI)
MEMORY 6GB (3x2GB) DDR3 SDRAM Memory, 1066MHz,ECC
BOOT HARD DRIVE (SATA/SAS) 300GB SATA (10,000RPM) Hard Disk Drive edit
ADDITIONAL HARD DRIVE (SATA/SAS) 80GB SATA (7200RPM) ADD Hard Disk Drive edit
INTERNAL HARD DISK DRIVE CONFIGURATION OPTION SELE 2 SATA HDD without RAID. edit
OPTICAL DRIVE 16X max SATA DVD+/-RW with Dual Layer Write Capabilities edit
DIAGNOSTIC DISKETTES Re... Read more

A:Intel Xeon vs Desktop Processors

Here is a benchmark that has Xeons included so you can compare their performance to desktop processors.

http://www.cpubenchmark.net/high_end_cpus.html
 

Read other 2 answers
RELEVANCY SCORE 59.2

Hi!I have thinkpad P50with Intel Xeon inside and 64 GB RAM.I am working on front end softwre development. during work laptop frequently freezes. Especially when working with browsers. Any idea how to fix it?

A:My Thinkpad P50 with Intel Xeon and 64 GB ram freq...

A couple of questions: 1.   Which OS and browser are you using?2.   Do you have a Smart Card reader installed? The reason I'm asking is that, once in a while, while using IE 11 on Windows 7 on my similarly-provisioned P70, the browser simply stops working.  Upon close inspection, it seems that the MFA client sometimes fails, even while not being used (I have the reader for future-proofing the machine but have no smart card inserted at present). The latest driver seems to be less likely to cause this problem, but it has not completely been eliminated. Could this be your issue? 



______________________________________________P70, Xeon 1505 CPU, 64 GB ECC RAM 2 x PCIe NVMe 512 GB Drives, 1 TB HDD, DVD-RW, 4 K Display, NVIDIA Quadro M4000W700 model 2757-CTO (8 GB RAM, Crucial MX-100 SSD + Hitachi TravelStar 1 TB 7200 RPM Drives, Bluray R/W, NVIDIA Quadro FX3700M, WUXGA); Windows 7 Ultimate SP-1, W700 Mini-Dock

Read other 1 answers
RELEVANCY SCORE 59.2

Does anyone know if the HP Z800 workstation is able to take the Intel Xeon X5690 processor? If so, when buying this processor, what other accessories should I be considering so that it'll work properly?

A:Will HPZ800 take Intel Xeon X5690 CPU?

According to the Z800 data sheet, the X5690 is supported. This is a high power Xeon and has a max TDP of 130W so you need a high capacity heatsink with these hot CPU's. I believe not all heatsinks are the same... Others may be able to specify exact part numbers..

Read other 9 answers
RELEVANCY SCORE 59.2

Hello Guys,
I cannot find the sound driver for Intel Exon processor. the model is: 0XC837 and serial: J9GV9B1. the computer is from dell but i dont know what its called. any help is appreciated. i recently installed win7 on it, it got all the drivers except the sound one so i need this. thanks
 

A:Intel Xeon Sound Driver

Read other 6 answers
RELEVANCY SCORE 59.2

I'd like to ask if someone has a XEON running on that mobo. I would like to buy one and would like to make sure that it runs on this mobo.

I'm using the latest BIOS, SOX5810J.86.5600 dated 07/29/2013.

Thanks for all advice in advance!

Read other answers
RELEVANCY SCORE 59.2

Hi I want to now where can i buy a Quad-Core Intel Xeon as i want to buy it from? Also can some one tell me which one is the new version.
 

A:Quad-Core Intel Xeon

as i am thinking of buying the new Gigabyte GA-8N-SLI Quad Royal Motherboard as well
 

Read other 2 answers
RELEVANCY SCORE 58.4

I'm considering, mostly just for the fun of it, upgrading the processor in my M93p Tiny desktop. According to CPU World, the socket type is a Socket 1150 / Socket LGA1150 / Socket H3. My M93p currently has a Intel Core i5-4570T (http://www.cpu-world.com/CPUs/Core_i5/Intel-Core%20i5-4570T.html), dual-core 2.9 GHz. I would like to put a quad-core processor in it, but I am concerned with the potential for increased power consumption and thermal load.
 
I am looking at the following options for upgrading it:
 
i5-4690K (http://www.cpu-world.com/CPUs/Core_i5/Intel-Core%20i5-4690K.html)
i5-4570S (http://www.cpu-world.com/CPUs/Core_i5/Intel-Core%20i5-4570S.html)
i7-4785T (http://www.cpu-world.com/CPUs/Core_i7/Intel-Core%20i7-4785T.html)
i7-4790K (http://www.cpu-world.com/CPUs/Core_i7/Intel-Core%20i7-4790K.html)
 
As I said, my major concern is increased power consumption and thermal load. The Thermal Design Power (TDP) of my current processor is 35 watt. The TDP of the processors I am looking at upgrading to range from 35 watts (the lower powered i7-4785T, not my first choice) to 88 watts. If I go with a TDP of 65 watts or 88 watts, is my heat sink going to be able to handle the thermal load? And is the power supply going to be able to handle the added power consumption. Any help would be appreciated. Thanks!
 
Mod:  edited Subject line to add processor model number













Solved!

Go to... Read more

A:ThinkCentre M93p Tiny: upgraded processor to Xeon E3 1275L V3 (CPU)

It has to be one of the processors it could be ordered with, else the BIOS won't recognize it and fail to post (boot.) Search above for others who have upgraded their processor.
 
edit:   the processors known to work, are those it could be ordered with.  The majority of owners that upgraded outside those, were unsuccessful in getting them to run. 

Read other 7 answers
RELEVANCY SCORE 58.4

I just recieved the 7510 about 2 weeks ago and have been getting increasingly annoyed with the trackpad which seems to  have issues. The trackpad never seems to stop working completely, but it seems to get stuck for a second pause or stutter frequently. Any suggestions would be welcome.

A:Dell Precision 7510 Trackpad Issues - Xeon Processor

I have not had issues with mine but I think I read somewhere "go to control panel -> mouse and turn off gesture support"

Rgds.

Read other 2 answers
RELEVANCY SCORE 58.4

First off, I need to explain a few things:

I am quite the newbie to hardware, and everything I "know" has only come from trial, and error. I am not one of those techy guys, and most of what I say will be be entirely based on things that I have learned through my own experiences - Not from facts. I make my decisions based on things that I assume, and perceive. I apologise for any offense, or irritation I may cause within this post. I don't stick to the "norm", and I do not tend to reach out for help, unless I really truly feel that I need it. In this case, I feel the need to ask for help. So here I am.

I know my system is old. Please do not blatantly tell me to get rid of it, or to buy an i3, i5, etc.
I would like the questions that I am asking to be answered directly, and to the point.
_________________________________
Piriform Speccy Information - http://speccy.piriform.com/results/ob7YNpOUBnt6RAXigeuPSVK
_________________________________

Well, I've had a 'Dell Precision Workstation 490' for some time now, and I have used it for 'Online' games such as MineCraft, and RuneScape without any issues. However, I am not receiving as great as a performance as I assumed I would have. I know little to nothing about Xeon Processors, and their capabilities. I only really learn as I go, and since this is the first time that I have ever actually had a hands on experience with Xeon Processors, it's a new thing to me.

This partic... Read more

A:Intel Xeon DP 5050 - A few gaming questions.

Read other 7 answers
RELEVANCY SCORE 58.4

Does windows 7 64bit support a DUEL XEON Quad-Core CPU Setup? (2 XEON Quad-Core CPU Motherboard)
Any help in this would be greatly appreciated
Thank You

Read other answers
RELEVANCY SCORE 58.4

Intel Xeon E5 V2 Upgrade Failure on Z Workstations
 
I tried one on the HP Z620 ; it simply would not post.
 
If you had a similar failure, please list it here so we may assist each other.
 
 

A:Intel Xeon E5 V2 Upgrade Failure on Z Workstations

nickben, look at this thread, it might answer your question: /t5/Workstations-z-series-xw-series/z820-e5-2600-v2-ivy-bridge-upgrade/td-p/6227119  




I am an HP Employee.My opinions are my own, and do not express those of HP.

Read other 9 answers
RELEVANCY SCORE 58.4

I'm looking for a Xeon E3-1235 cpu (LGA 1155 socket) to build a server, I read here in a post from almost a year ago that not all 1155 MOBOs can handle the Xeon cpus.

Is this true?

In Newegg they have normal 1155 boards and 1155 Server boards.
Since normal boards are much cheaper and I won't use all the features in server boards I was planning to get a normal board.

Should I get a server board instead??

A:MOBO for Intel Xeon E3-1235 LGA 1155

Unlike the last generation Xeon 1156 chips (X3440, X3450, X3450), the latest Xeon 1155 chips (E3-1230, E3-1235, E3-1240) are not known for their compatibility with non-server boards. For whatever reasons, manufacturers did not update the microcode on non-serverl boards to facilitate the Xeon 1155 chips.

I would suggest a server board for the Xeon E3-1235 CPU.

Read other 2 answers
RELEVANCY SCORE 58.4

Bottom Line. If I spend the extra money for the increased speed of graphics that the 1575 offeres w/Pro Iris, should I also speed the extra money for the M5000M to best utilize that extra "bandwidth" capability or are the two unrelated?

Read other answers
RELEVANCY SCORE 58

Hello, My ThinkPad P50 20EN001SUS 15.6" - Intel Xeon E3-1505M comes with Lenovo 16GB DDR4 2133Mhz ECC SoDIMM Memory. Details are as the followings: Part Number4X70J67438Max Operating Temperature95CMin Operating Temperature0CCapacity16GBModule SpecificationsPC4-17000Form FactorSODIMMMemory TypeDDR4RAM Speed2133MHzParityECC SDRAM But I am unable to order Lenovo 16GB DDR4 2133Mhz ECC SoDIMM Memory from Lenovo as I'm residing in Thailand (I purchased this laptop on eBay). So I'm thinking to buy RAM from Crucial as it's more convenient to ship here. However, Crucial only has this model available: Crucial 16GB DDR4-2400 ECC SODIMM                  CT8041957Form Factor: SODIMMTotal Capacity: 16GBWarranty: Limited LifetimeSpecs: DDR4 PC4-19200 ? CL=17 ? Unbuffered ? ECC ? DDR4-2400 ? 1.2V ? 2048Meg x 72 So the red texts are the difference between these 2 rams. Please let me know if this Crucial ram would be compatible with my ThinkPad P50 20EN001SUS 15.6" - Intel Xeon E3-1505M? I'd like to add up 32GB more. Thank you very much! Zong

Read other answers
RELEVANCY SCORE 58

Is there a trick to getting this to work? I have seen where people get Xeon W36XX processors to work in the 435t.

Current set up...
i7-920
12GB RAM 1333
BIOS 1.1.4

A:Intel Xeon X5687 in a Dell Studio XPS 435mt?

Its nowhere near simple.  The .32 micron tic toc means to me its NOT EVER possible.  There are also likely physical and pinout obstructions to doing this.  I also am unable to find ANYONE that has used a W3680 or any XEON period in the 435T.
Microarchitecture    NehalemPlatform    X58Processor core     BloomfieldCore steppings     C0 (SLBCH)D0 (SLBEJ)CPUIDs    106A4 (SLBCH)  106A5 (Q1H7, SLBEJ)Manufacturing process    0.045 micron
********************************************************************************************Core Model Type/ProcNo.     W3680Core Stepping     B1CPU ID String     206C2hCPU Socket Type     LGA1366
*********************************************************************************************

Processor number
X5680
Family
Xeon
Technology (micron)
0.032
Processor speed (GHz)
3.333
Bus speed (MHz)
3200 (QPI)
L2 cache size (KB)
1536

Read other 1 answers