Over 1 million tech questions and answers.

BSOD, BSOD, BSOD (minidump files zipped)

Q: BSOD, BSOD, BSOD (minidump files zipped)

The title says it all. Brand new i7 x980. Asus x58 premium. 12GB Mushkin enhanced redline. USB 3.0. SATA 6Gbps. Intel x-25MG2 160GB.
Multiple blue screens. Just this morning (Tuesday morning) it was 4 or 5 of them within about a 40 minute time frame. PC Pitstop driver scan had me update my NIC drivers. No help.
I'm hoping you forensic computer detectives can help figure this one out.
Minidumps are zipped up as are three WER XML files.
Thanks,
Ethan

RELEVANCY SCORE 200
Preferred Solution: BSOD, BSOD, BSOD (minidump files zipped)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD, BSOD, BSOD (minidump files zipped)

What was the error message that arrived with the BlueScreen? Was it Driver_irql_not_less_or_equal?

Read other 6 answers
RELEVANCY SCORE 99.6

Ok so My problem is that I get blue screens ALL the time maybe 4 times a day and there is nothing I can do about it because there is no minidump files it's like i'm stuck in an infinite loop I have asked this question on about 10 other forums and no one can help.
When they occur there is no consistency they happen at any time for example I was playing a game and I got one and earlier I was browsing the web and I got one. I do Have some screenshots of the blue screens because that's all the information I can get saying as they don't write to the computer. And yes my startup and recovery setting are all correct. I don't expect anyone to be able to help me with the minidump files but I have some pictures of my blue screens and I'm hoping someone would be able to help me with these and tell me where the error is.

http://i.imgur.com/s8bDIBw.jpg
http://i.imgur.com/fx6AtSe.jpg
http://i.imgur.com/8mKbzEK.jpg
http://i.imgur.com/Yq3GpI2.jpg

A:No BSOD Minidump Files and Constant BSOD

Hi DanielOS96.

It is clear from the images that the BSODs are failed to being recorded.

We are seeing three different bugcheck codes there in those images.
Stop 0x50, one
Stop 0x3B, two
Stop 0xA0000001, one.
One thing is common among these three, that is a possibility of a failing AMD/ATI display. For for any further comment on it, we need to see some files (despite of the fact that there is no crash dump).

Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

Read other 3 answers
RELEVANCY SCORE 94.8

Hi guys,
so I posted a thread with regards to the BSODs I got last week and got told to follow the instructions on the BSOD thread and get these files attached to a new thread. So here they are.

Also with regards to system questions:

- OS is Windows 10
- x64
- there was no original OS (new build)
- I bought the OS (downloaded to be specific) from retailer
- system age is under a month (literally built this PC two weeks ago)
- age of OS is the same as system
- I haven't reinstalled the OS, I have the install program on a USB and my
PC boots up just fine so there is no option to do the repair windows
function.
- CPU is AMD A10 7870K Black APU, Socket FM2+, Quad Core Processor
- Graphics Cards is Gigabyte G1 GTX 960 Windforce
- Motherboard is Gigabyte G1 Sniper A88X
- PSU is Corsair CX500M

(there is no system manufacturer since it's my own build)

Thanks for the help beforehand guys!

Oh and if it isn't clear yet it's a Desktop :)

Read other answers
RELEVANCY SCORE 94

I recently built my own computer and since I got it up and running, my computer has been blue screening without any reason that I can find. It never BSOD's during the same thing. Sometimes I'll be playing a game, other times just browsing the internet, and once while watching a movie.

If anyone could offer me some assistance with this- I'd rather not have to wipe the computer and start over, since I just got it fully situated and functioning. Well, functioning for the most part, minus the BSOD.

A:BSOD without reason on a new computer - files zipped

There is a lot of memory corruption, Can you follow this tutorial: RAM - Test with Memtest86+

Report Back Thanks.

Read other 7 answers
RELEVANCY SCORE 92

Getting bsod random times, having to manually start explorer.exe on startup.
i can provide any extra files needed.

A:Random BSOD's unable to use SF tool (zipped dump files)

The problem here is SPTD.sys.

Code:
Device object (fffffa800a727cb0) is for:
InfoMask field not found for _OBJECT_HEADER at fffffa800a727c80
\Driver\HDAudBus DriverObject fffffa800a725980
Current Irp 00000000 RefCount 0 Type 0000002a Flags 00002004
DevExt fffffa800a876f60 DevObjExt fffffa800a727e28
ExtensionFlags (0x00000800) DOE_DEFAULT_SD_PRESENT
Characteristics (0x00000100) FILE_DEVICE_SECURE_OPEN
AttachedTo (Lower) fffffa8007be3040Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
\Driver\ACPI
Device queue is not busy.
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall the program at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Download and install this version of Intel Rapid Storage.

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Atheros Valkyrie USB BootRom driver is also c... Read more

Read other 9 answers
RELEVANCY SCORE 88.8

Hello everybody, i have a big problem.

Randomly my pc have blue screen and i don't know really why!I have changed nothing, no overclock, no new driver installing,no new hardware!When happen screen freeze with multicolor striped for half second and than i see blue screen. When restart this is the error:

Firma problema:
Nome evento problema: BlueScreen
Versione SO: 6.1.7600.2.0.0.256.1
ID impostazioni locali: 1040

Ulteriori informazioni sul problema:
BCCode: 50
BCP1: E0685030
BCP2: 00000000
BCP3: 948ED203
BCP4: 00000002
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

File che contribuiscono alla descrizione del problema:
C:\Windows\Minidump\092711-18376-01.dmp
C:\Users\Marco\AppData\Local\Temp\WER-32916-0.sysdata.xml

Leggere l'informativa sulla privacy online:
Windows 7 Privacy Statement - Microsoft Windows

Se l'informativa sulla privacy online non ? disponibile, leggere quella offline:
C:\Windows\system32\it-IT\erofflps.txt

HEre the mini dump file: File name: minidump.rar File size: 27.28 KB
I see also more than one time that this happen when avast po pup something, but i installed avast 1 years ago and give me no problem untile now....
Plz help!

A:BSOD - help minidump files

Hi I have moved you to Bsod's App Crashes and Hangs for more help please follow the instructions here http://www.techsupportforum.com/foru...ta-452654.html
this will give the analysts more info to work with

Read other 1 answers
RELEVANCY SCORE 88.8

Hello everybody, i have a big problem.

Randomly my pc have blue screen and i don't know really why!I have changed nothing, no overclock, no new driver installing,no new hardware!When happen screen freeze with multicolor striped for half second and than i see blue screen. When restart this is the error:

Firma problema:
Nome evento problema: BlueScreen
Versione SO: 6.1.7600.2.0.0.256.1
ID impostazioni locali: 1040

Ulteriori informazioni sul problema:
BCCode: 50
BCP1: E0685030
BCP2: 00000000
BCP3: 948ED203
BCP4: 00000002
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

File che contribuiscono alla descrizione del problema:
C:\Windows\Minidump\092711-18376-01.dmp
C:\Users\Marco\AppData\Local\Temp\WER-32916-0.sysdata.xml

Leggere l'informativa sulla privacy online:
Windows 7 Privacy Statement - Microsoft Windows

Se l'informativa sulla privacy online non ? disponibile, leggere quella offline:
C:\Windows\system32\it-IT\erofflps.txt

HEre the mini dump file: File name: minidump.rar File size: 27.28 KB


I see also more than one time that this happen when avast po pup something, but i installed avast 1 years ago and give me no problem untile now....

i have windows 7
video card 4890
core phenom II x4 3.2 ghz
4 gb ram

A:BSOD - help minidump files

Hello avalon89x and Welcome to TSF,

Pleas read through the BSOD posting instructions found here. RAR/ZIP all files down to one file and attach them to your next reply in this thread, as we're otherwise unable to help you.

Read other 1 answers
RELEVANCY SCORE 88.8

My computer crashed after it went into sleep mode; it has experienced multiple similar crashes over the past two weeks.

A:BSOD with minidump files

Welcome
Looks like a potential hardware problem. Its just hit and miss trying to determine the precise hardware cause. The most likely is memory
Guide to using Memtest86+ - Geeks to Go Forums
Test for 6 passes. Test each stick separately for another 6 passes.

Read other 1 answers
RELEVANCY SCORE 88.8

Installed new 4890 and I've had bSOD's ever since. I was hoping someone could help.

A:Bsod Minidump files

  
Quote: Originally Posted by Hijacc


Installed new 4890 and I've had bSOD's ever since. I was hoping someone could help.



"It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash.

As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.

If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

If playing with video driver versions hasn't helped, make sure the box is not overheating.

Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.

Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.

If so, it might be as simple as dust buildup and subsequently inadequate cooling.

I would download cpu-z and gpu-z (both free) and keep an eye on the video temps Let us know if you need help STOP 0x116: VIDEO_TDR_ERROR troubleshooting

Read other 5 answers
RELEVANCY SCORE 88.8

This laptop has very random BSOD occurrences. I attempted to download the diagnostic tools but was unsuccessful. I wish I could add more detail other than the two more recent minidumps, but that is the best I have for now. Thank you so much.

A:BSOD with minidump files.

Welcome to SF buggybuggy .








  
Quote: Originally Posted by buggybuggy


I attempted to download the diagnostic tools but was unsuccessful.


Can you be more specific?

Please upload the MSINFO32 file:

Start → Run → type MSINFO32 then hit Enter.
In MSINFO32 go to, File → Save → name it your user-name.
Once the file is saved right click it and choose Send to → Compressed (zipped) folder.

Attach the file in your next post.

Please scan for possible infection and file corruption:
Download TDSS-Killer and scan for rootkits.
Download Kaspersky Rescue CD and scan for other types of infections. (a how-to tutorial)
Download Malwarebytes and DON'T activate the trail (uncheck the box at the end of the installation)
Follow this tutorial on how to use the SFC/ SCANNOW tool in Windows.
(*Kaspersky Rescue CD from a USB thumbdrive)

Let us know the results.

Read other 3 answers
RELEVANCY SCORE 88.8

Here are the two latest minidump files
Thanks Matt

A:Win 7 BSOD Help w/minidump files

  
Quote: Originally Posted by GeepKnee


Here are the two latest minidump files
Thanks Matt


Both dumps were hardware issues. bugcheck 124 is hardware possibly memory, and the other dump didnt contain much info. It wasnt useful for too much other than to tell that there was a memory problem

I suggest

download and run memtest x86 overnight
run a system file check on your system files to verify and fix them
to run type cmd in search>right click and run as admin>sfc /scannow

Let us know the results

Ken J

Read other 6 answers
RELEVANCY SCORE 88.8

OK guys,

I've tried to do my research on this and I've done a LOT of troubleshooting so far.

For the past 6 months, I have been getting BSOD about 3 times a week at complete random times. It mostly occurs overnight when I'm asleep.

I have tried deactivating all hibernate and sleep functions with no luck. I have tried three different anti-virus softwares and am now using Microsoft Security essentials.

I have tried various settings for creating a minidump file with NO luck but I think I might know why....

My BSOD is a Kernel data inpage error, stop code 0x0000007A

The sys file is lists 80% of the time is volgrx.sys but I've also seen an NTFS.sys listed.

My even viewer doesn't show much other than a Kernel Power failure event ID #41 but I'm not that skilled at reading and sifting through so I surely could be missing something.

Here's my specs:

Windows 7 pro
Intel i5 2500k
MSI P67 G43 board
Kingston HyperX SH100S3 120GB SSD (thinking this is the culprit)
Nvidia 560ti

I know I'm missing more info but please help direct me with more things to try.

Thank you all

EDIT: My page file is on the OS drive, I know that can prevent minidump writes.

A:BSOD with no minidump files!

I can't change the title to better describe my issue for some reason.

Read other 9 answers
RELEVANCY SCORE 88.8

I have been having system crashes intermittantly and need some help undestanding my minidump files... Here's what I am seeing:

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\111709-25490-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*Symbol information
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a5e000 PsLoadedModuleList = 0xfffff800`02c9be50
Debug session time: Tue Nov 17 20:07:10.583 2009 (GMT+1)
System Uptime: 0 days 10:04:53.441
Loading Kernel Symbols
...............................................................
................................................................
..........................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A0,... Read more

A:BSOD - Need Help with minidump files

Go to Control Panel > Device Manager and see if any entry has a yellow flag beside it.

Have you updated your driver either from Windows update or the manufacturers site?

Read other 9 answers
RELEVANCY SCORE 88.8

Hi,

for half a year now my acer aspire 4520 noebook had been having random BSOD, sometimes it seems to go away, ut in a while it will come back. Pls help me, cuz i am really frustated with it. thanks in advance. If you need more info, I'm more than happy to provide it.

system spec:
Window Vista Ultimate sp1
AMD TL-58
n-force 600m Motherboard
Nvidia Geforce 700M
2Gb DDR2 Ram
120Gb Hdd

p.s. If i post in the wrong section pls tell me, thanks
 

A:Help with minidump files n BSOD

Inside the 3 Minidumps:




BugCheck 1000008E, {c0000005, 81e7d34f, 9ab41ac4, 0}
Probably caused by : ntkrpamp.exe
PROCESS_NAME: audiodg.exe

BugCheck 1000007F, {d, 0, 0, 0}
Probably caused by : win32k.sys
PROCESS_NAME: explorer.exe

BugCheck 1000007F, {8, 878500c0, 0, 0}
Probably caused by : ntkrpamp.exe
PROCESS_NAME: LimeWire.exeClick to expand...

Hmm, that last one is a concern
Limewire is a filesharing program, that is notorious for downloading Virus\Malware


Have a look at:

Viruses/Spyware/Malware Preliminary Removal Instructions
 

Read other 12 answers
RELEVANCY SCORE 88.8

As the old thread cannot be found...
i got another bsod today...
Can you tell me what caused the BSOD?thx.

A:BSOD with 1 minidump files

Here's the thread: http://www.vistax64.com/general-disc...umps-file.html

Read other 1 answers
RELEVANCY SCORE 88.8

my first post, so hello all.
I'll get straight to the point:
this bsod is really bugging me. i've ran memtest, check disk, virus checker (windows one care) all the latest drivers are installed but i'm getting these random bsod and sometimes the computer locks up with the screen all fuzzy.

i've atttached my minidump files and would be most grateful if someone out there could look at them and decipher what clues they contain?

here's what i'm getting at the bsod:

ntfs.sys 0x24
page fault in non paged area 0x50
pfn list corrupt 0x4e
apc index mismatch 0x1 (file not attached)
 

A:Bsod minidump files

just had another bsod, this time memory management 0x01a

this is a self build system so i cant even complain to anybody apart from myself!!

the only thing i havent added to my system spec is the psu (antec signature 850w)
 

Read other 4 answers
RELEVANCY SCORE 88

Hi guys been getting BSOD regularly probably every hour or so, I'm really unsure whats causing the the problem if any one can help it would be greatly appreciated.

A:BSOD incuded minidump files

Your BSODs seem to be centered around netr28ux.sys. This appears to be the driver for Ralink RT2870 series USB802.11n Wireless Adapter. There appears to be an update for this driver compared to your version on the mediatek website so please install it and monitor for further BSODs.

Read other 2 answers
RELEVANCY SCORE 88

Help keep getting random restarts, occationally get mini dump files. Memtest has run good numerous times. Any ideas? Thanks for the help. Matt

A:BSOD Help Minidump files included

Hello !! Welcome to SF !!

The Dump files are pointing to 1394ohci.sys. This is known for Legecy issues. I would recommend to update your Chipset drviers also check for Windows Update and see if there is an optional updates.

I would recommend to Run Hard Drive Diagnostic and Memory Diagnostic

Also found the Driver that is very old which can also be an issue.

Code:
MarvinBus64.sys Sat Sep 24 02:47:03 2005
I believe it belongs to Pinnacle I would recommend to update the drivers if there is any if not the it's best to replace the device because i doubt whether it's compatiable with Windows 7.


Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02e0d000 PsLoadedModuleList = 0xfffff800`0304ae50
Debug session time: Mon May 24 18:17:42.518 2010 (GMT+6)
System Uptime: 0 days 2:13:11.532
DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa80062c6a20, Physical Device Object of the stack
Arg3: fffff8000447e518, Functional Device Object of the stack
Arg4: fffffa800b73b630, The blocked IRP

0: kd> !devobj fffffa8008393b90 f
fffff8000302d790: Unable to get value of ObpRootDirectoryObject
Device object (fffffa8008393b90) is for:
InfoMask field not found for _OBJECT_HEADER at ff... Read more

Read other 1 answers
RELEVANCY SCORE 88

Hi everyone.
I've been getting a BSOD for a few days, and I don't know why.
And now it's gotten to the point where as soon as Windows finishes loading, it crashes immediately.
The install of XP is pretty fresh, and there are no malicious programs, trojans, viruses, or spyware.
The laptop runs fine in safe mode without any freezing or crashing.
I have run memtest for a while, and no errors come up.
I tried running hard drive test, but since my laptop needs to load special drivers from a floppy disk, I couldn't run a complete drive test.

Here is the BSOD error message:

0x0000008E (0xC0000005, 0x80610305, 0xA5FBD9DC, 0x.....)
I can't read the rest because the computer auto-restarts too quickly.

Here are my laptop specs (Laptop is over 3 years old - running hard almost everyday):

Sager 9880
Pentium 4 3.0 GHz
512MB PC2-4200/200P RAM
100GB Seagate ATA 2.5" HD
ATI X800 Mobility Radeon - 256MB/PCIxpress (Removable)

I have included the most recent minidump files.
Can anyone please help me to figure out what is wrong?:4-dontkno
 

A:BSOD - Minidump files included - Help please

They are all similar to this:

BugCheck 1000008E, {c0000005, 80579217, a6fe199c, 0}

Probably caused by : ntkrnlmp.exe ( nt!HvpGetCellMapped+5fClick to expand...

It appears to be a corrupt registry hive.

Your first dump is the 29 of Feb. Do you have any system restore points that precede that by at least a few days?

>>> Does the problem ever occur in a Clean boot (antivirus, spyware and 3rd party firewalls disabled)?

CLEAN BOOT TROUBLESHOOTING technique XP

First, restart in Safe Mode if necessary -- (tap the f8 key promptly on startup and choose the Safe Mode option from the boot menu) or Normal mode

Then:

Run msconfig and select the "Services" tab. Check "Hide Microsoft Services" and then disable the rest. Also uncheck "load startup group" on the general page.

See this link for detailed information:

http://support.microsoft.com/default.aspx?scid=kb;EN-US;310353
http://support.microsoft.com/kb/929135 << for Vista, but applies equally to XP, and better written.

Now restart and test the issue at hand

If no problems, run msconfig and recheck half the disabled items on the Services tab. Test again. If the problem recurs, UNcheck half the items you just checked to narrow down the culprit.

If the problem didn't occur, check the other half, so all the Services are enabled -- proceed to do this on the startup tab as well.

Get the idea? You want to isolate the problem to a specific startup if possible.

Note: if you alre... Read more

Read other 1 answers
RELEVANCY SCORE 88

Long term problem (months) BSOD occurs at least once a day. I would like to attach the last 3 minidump files in hopes that someone can make some sense of them but I don't know how to convert the .dmp files to a format that can be posted.
The system Black screened finally 2 weeks ago and I had a computer repair technician save my files and install their software in case mine was corrupted and it still does the same thing.

My computer reboots so quickly I can't read the message that comes up.

I have a common message ntoskrnl.exe as the image name and probable cause. The computer is running XPSP2 and I have a wireless llinksys router and a matching notebook adapter. Updated the drivers for the notebook adapter and no change.

My limited skills can take me no further,
Thanks,
Laara

A:BSOD cannot decipher minidump files

http://forums.majorgeeks.com/showthread.php?t=35246
That link will explain how to decipher the .dmp files

If the software has been reinstalled and the reboots persisted, I would have to lean towards a hardware problem. More than likely your memory (or a failing power supply, or excessive heat, etc...). There are cheap/free ways to test most of this so we will start with the free ones first.

http://www.memtest86.com/ (click on the left side of the screen where it says "Free Download" and download "Download - Memtest86 v3.4a ISO image (zip)" You will have to extract the zip file and burn the .ISO to a cd that is bootable. (if you have questions about this process, let us know what kind of burning software you use and we will see what we can do). This will put your memory through a rigorous test and report whether or not it generates any errors, it is recommended to let it complete a few cycles (up to 10). This process can take a while, but is free and will tell you definitively whether or not it's your memory.

Speedfan, SensorsView (free 30 day trial), PCWizard, and CoreTemp will all test the temperatures in your PC using the sensors that are built into your motherboard. They are all either free or trial software so it will not cost you anything. Any of these should give you a pretty good indication of whether or not heat is your problem.

Look over that and post back with whatever updates you have.

Read other 4 answers
RELEVANCY SCORE 88

Some of you may recall a previous topic I made which has been moved to another forum section.Basically I had several viruses, and kept having a BSOD on Normal starup after about 10 seconds when most of the processes loaded and then on Safemode, so I used the Windows Disk repair tool and managed to get access to Safemode. I downloaded avast antivirus which deleted the viruses.So now my PC should be clean but I still get the BSOD on normal starup after about 10 seconds of loading processes. (Could a process be causing it?)This is the BSOD STOP Message 0x0000008E (0xC0000005, 0xB94E8C7C, 0xAC81E7E8, 0x00000000)Any info on the Stop message or possible causes will be appreciated.Now to the next question, reading a minidump file.Is it possible to read minidump files in Safemode? Because that's the only way I can have access to windows.Any help will be much appreciated.(Note to mods in case topic gets moved: Virus problems have been fixed, just a case of BSOD and Minidump reading)Thanks very much. (Also this forum has given me the best advice so far, well done to everyone )EDIT: Would it be safe for me to remove most of the services and startup using msconfig and just leaving the ones used on Safemode?

Read other answers
RELEVANCY SCORE 88

hi

I am running Windows XP SP3 on quite a dated computer that has been pretty solid up until now.

It is randomly suffering from BSODs, sometimes only after a short period of time but it can also go a few days without any issues.

After one such BSOD I rebooted the computer and after the initial screen where you can access bios, I was greeted with a blank screen with a 0 on it. Not good. So I went into bios and changed it to fail-safe settings and everything went fine. Then the BSODs set back in after a few days.

I have attached the latest minidumps. I have tried analyzing them but I really can't work it out, only consistent theme I see is win32k.sys. But this hasn't led me to any answers.

Specs:

Pentium 4 CPU 3.00GHZ 2gb of memory

Would be greatful for any assistance and if you need more info just ask.

Thank you

A:BSOD - minidump files attached

Hi, I have only analyzed the latest May-31 dump. It reports PAGE_FAULT_IN_NONPAGED_AREA (50), problem with parallel port driver parport.sys. However, recommend that you download memtest and test for bad or flakey memory: www.memtest86.com. Then report findings.

Read other 4 answers
RELEVANCY SCORE 88

Hi all,
This is my first pot here, so I'm glad I found you.
I don't know why on my computer there are so much BSDOs (almost every 20-30 minutes). I installed the latest chipset and video drivers, but with no results. The error that appears is 0x0000008E.

I'm using Windows 7 x86.
I attached the minidump files. Can you help me with those files? Or cand you tell me how to read and understand what it is written there?

Many thanks and best regards!

A:BSOD with minidump files attached

I suggest starting all troubleshooting with the following diagnostic tests. They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:





Quote:
H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Malware (read the details at the link)


Please provide this information also: http://www.sevenforums.com/crashes-d...tructions.html

It is possible that the following older drivers may be causing your problems.
Please either REMOVE or Update the older drivers listed below.





Quote:
HOW TO FIND DRIVERS:
DO NOT use Windows Update or the Update Driver function of Device Manager as they are not the most current versions available.
Also, DO NOT update from the PC Manufacturer's website unless the Driver Reference cited below states that you should get the drivers from the OEM.

The most common drivers are located on this page: Driver Reference
If you can't find the driver, post back and we'll see what we can find.

Here's the older drivers that were found in the memory dump files:

Code:

aswTdi.SYS Wed Nov 26 12:16:37 2008 (492D8475)
- avast! TDI Filter Driver
- Driver Reference

aswRdr.SYS W... Read more

Read other 1 answers
RELEVANCY SCORE 88

I have brand new pc, working great except for freezing up and shutting down once in a while!

Windows 7 - 64bit (pre-installed
i5 750 (2.66ghz) processor
4GB DDR3 RAM
Zotac video card with Nvidia GeForce 9500GT 1GB
Gigabyte P55M-UD2
700w power supply

I've tried every troubleshooting thing I can do - installed latest drivers for videocard, motherboard, keyboard, mouse, ran memtest86 - checked installed software for Windows 7 compatibility, etc, and can't figure it out.

I don't know how to read minidump files, would appreciate help determining what might be causing BSOD errors...

Thanks!
Mike

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80046B7060
BCP3: FFFFF80004021518
BCP4: FFFFFA8004918E10
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\020310-23743-01.dmp
C:\Users\USER\AppData\Local\Temp\WER-32619-0.sysdata.xml

A:BSOD - help analyzing minidump files

Hello and welcome to TSF.

Three total minidumps, bugchecks 0x9F, 0x333 (A new one!) and 0x50 all pointing to nvlddmkm.sys:

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Devin\Downloads\TSF\mbarrett34\013110-26488-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c55000 PsLoadedModuleList = 0xfffff800`02e92e50
Debug session time: Sun Jan 31 19:16:24.663 2010 (GMT-5)
System Uptime: 0 days 19:28:47.177
Loading Kernel Symbols
...............................................................
................................................................
.................
Loading User Symbols
Loading unloaded module list
......................
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
*******************************************************************************
* ... Read more

Read other 16 answers
RELEVANCY SCORE 88

Over the last couple of months I have been getting sudden BSOD crashes about once a week. My computer always restarts without problems, but I would like to track down what is causing the problem.
After searching posts here, I have run BlueScreenView, and the report is copied here. Unfortunately I only have the latest memory dump, as I run Ccleaner every day and it is set to clear memory dumps - I've now cleared that setting.
 
==================================================
Dump File         : 122613-70730-01.dmp
Crash Time        : 26/12/2013 4:52:47 PM
Bug Check String  : DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code    : 0x000000d1
Parameter 1       : fffffa80`0ab5e000
Parameter 2       : 00000000`00000002
Parameter 3       : 00000000`00000000
Parameter 4       : fffff880`04ae9375
Caused By Driver  : cmudaxp.sys
Caused By Address : cmudaxp.sys+28375
File Description  : C-Media Audio WDM Driver
Product Name      : C-Media Audio Driver (WDM)
Company           : C-Media Inc
File Version      : 7.12.8.1794
Processor         : x64
Crash Address     : ntoskrnl.exe+75bc0
Stack Add... Read more

A:Help understanding BSOD minidump files

Hi
 
The only crash report you posted shows the audio driver as the reason behind the crashes. From the Speccy report it seems that your audio device is an Asus Xonar card. So please uninstall the audio driver and it's related softwares completely from the system. Then download and install the latest version from official Asus support page.
 
 
Driver download page : http://support.asus.com/download.aspx?SLanguage=en&m=Xonar+DX&os=22
 
Version: 7.0.8.1821 which is released on 2013/10/03 is the latest revision.

Read other 2 answers
RELEVANCY SCORE 88

This drives me insane. I am trying to do school work and all the time the computer will randomly BSOD. It did so twice in a row today but will likely not do it any other time today. Seems to come and go for some reason. I am at a total loss but have uploaded the two minidump files recorded.

I really hope someone will know why this is happening.

Thanks in advance and if you need any further info please write back and i'll supply it.

Many thanks

Read other answers
RELEVANCY SCORE 88

Hey,
Getting several BSOD events. When I try to zip up the files for loading I get access denied. I changed the registry to take ownership to each file, but still not able to zip up using 7 Zip.

Any help would be great!
Thanks!
 

A:BSOD - Unable to Zip Minidump files

Read other 16 answers
RELEVANCY SCORE 88

hello.
getting BSODs frequently
uploaded 6-7 minidumps so any1 would be able to analyse them

we got 2 of the same comp. here at the office, so i have replaced their RAM dimms and video cards with each other already. did not work.

if i remember correctly, bsods started to show up after i updating the graphics driver but returning back to old ones didnt work as well.. so it might be a coincidence?
 

A:help, BSOD. Minidump files uploaded

Read other 6 answers
RELEVANCY SCORE 88

I have an acer aspire laptop running Win XP that when bumped or picked up goes to a BSOD. I would like to troubleshoot down to what I can only assume is a hardware problem. I have analyzed the minidump file in WinDbg but cannot be sure where the problems are coming from. It refers to a csrss.exe but that seems to have many problems. I have restored the computer a number of times, initially thinking it was a registry or system file problem...enclosed are two minidump files along with the WinDbg text files...thanks for any help with this!!
 

A:Strange BSOD with minidump files

Four suggestions:

1. Since this happens when you "bumped or picked up" the computer, first, DON'T "bumped or picked up" the computer. No? OK. The odds are the cause is a loose connection. Check all the cable connections to insure a firm seating.

2. Reseat all the RAM.

3. Click on the Memtest link in my Signature. Follow the directions in the #1 post.

4. Check the seating of the cable to the C: drive. Then, do a chkdsk on your C: drive.
Follow these steps... ChkDsk

Hope this helps.
 

Read other 1 answers
RELEVANCY SCORE 88

Hello i have had several BSOD however i have a problem regarding the minidump files, it seems that they are stuck in a way and all i get is the first ones that logged a BSOD meaning they are around 2-3 weeks old. No matter what happens they are static and the number of those files is only two, is it the Windows, storing only 2 files or there are some changes that have to be done? please help in order to provide better info regarding the BSOD i get.

A:several bsod occur and still getting old minidump files

To ensure minidumps are enabled:

Go to Start and type in sysdm.cpl and press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box.
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
Click OK twice to exit.
Reboot if you've made changes.

Read other 1 answers
RELEVANCY SCORE 88

Hi,
Before you shoot me, I want to say that the default way to post the info about my BSOD crash, doesn't work. I cannot get the perfmon/ report started, even with it enabled in the services.

I had several crashes, but I found out why : because of a bad driver for my sound device tascam us-800. they are developing a new driver now for that.
but suddenly my system crashed again! no us-800 found, could you please help me with this one?
I posted minidump file of today in a zip as an attachment.

Thx!

martin

A:BSOD Crash - minidump files

BSOD caused by Peer Guardian and a software from FsPro, please remove these software
Update your Pinnacle Marvin Bus Driver http://www.pinnaclesys.com/PublicSit...viewDownload=1

Code:
MarvinBus.sys 0x92e6b000 0x92e99000 0x0002e000 0x43347105 24/09/2005 01:17:57
Update your Creative Webcame driver http://support.creative.com/Products...aspx?catid=218

Code:
OA004Ufd.sys 0xac449000 0xac46c520 0x00023520 0x48450f2e 03/06/2008 13:30:22
OA004Vid.sys 0xac407000 0xac448dc0 0x00041dc0 0x48807d97 18/07/2008 15:25:11

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F5, {6d, b096ef50, b096ef20, 0}

Unable to load image \SystemRoot\System32\Drivers\FSPFltd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for FSPFltd.sys
*** ERROR: Module load completed but symbols could not be loaded for FSPFltd.sys
*** WARNING: Unable to verify timestamp for pffilter.sys
*** ERROR: Module load completed but symbols could not be loaded for pffilter.sys
Probably caused by : FSPFltd.sys ( FS... Read more

Read other 9 answers
RELEVANCY SCORE 88

Hi

I keep getting the BSOD followed by a fleeting error message, which is too quick to read.

I downloaded the windows debugger and also symbols for sp3 and have tried to open the mini dump files, however I get a message within the debugger that says

"Symbols can not be loaded because symbol path is not initialized." and at the bottom "Probably caused by : ati2mtag.sys".

I probably have about a 150 minidump files within the folder. Is someone able to analyse a file/s for me so that I can at least see what's causing this?

By the way, I'm new to this so please take it easy on the jargon!
Thanks. Much appreciated.
Lee

A:BSOD. Please help read my minidump files

Hello Lee

Without seeing the dump files I would say you need to update your ATI drivers. Do you have an ATI video card?

Also you could make the BSOD stay so you can read it
Right-click My Computer / Properties / Advanced / Startup and Recovery/Settings.
Under System Failure, uncheck the "Automatically restart" check box
You will then get a BSOD with error message which will help identify the problem.

Please post the message such as
STOP 0x00000000A IRQL NOT LESS OR EQUAL
and any drivers named ( *****.sys)

Read other 1 answers
RELEVANCY SCORE 87.6

BSOD screenshot: Dropbox pic

Minidump file(s): Dropbox folder

Just built a new computer, but it seems to be getting this a lot. Here's the spec list using pcpartpicker (plus a GTX 770 FTW, because pcpartpicker doesn't yet support varied GPUs).

Any help regarding this would be appreciated.

A:BSOD 0x0000000a, have latest minidump(s) and screen of the BSOD

Anyone have a clue?

Read other 5 answers
RELEVANCY SCORE 86.8

I started blue-screening a couple days ago rather regularly, about 5 minutes after booting up. Once the laptop restarted itself, she won't blue screen again until I shut her down and start her up again. I have not installed or updated any drivers, or done much of anything lately, so I'm not sure what has caused her to start acting up.

Analysing these files is beyond me so I figured someone here may be able to help out. Any insight is greatly appreciated. When she does blue screen, at the bottom it'll say "STOP 00000x" and a whole lot of other numbers. Unfortunately I don't remember them all. If any extra information is needed to diagnose what's going on let me know.

Cheers,

A:Can anyone analyize minidump files? BSOD issues

 Clean bootTroubleshoot Application Conflicts by Performing a Clean Startup
Reduce items at start-up. No software except anti-virus is required plus doing this improves the time for logging into windows:How to Change, Add, or Remove Startup Programs in Windows 7

Code:
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\KoolKat77\Downloads\WITTINATOR-PC-20_07_2015__71131_10\071915-26145-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available


************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18869.amd64fre.win7sp1_gdr.150525-0603
Machine Name:
Kernel base = 0xfffff800`03857000 PsLoadedModuleList = 0xfffff800`03a9e730
Debug session time: Mon Jul 20 03:21:34.952 2015 (UTC + 6:00)
System Uptime: 0 days 0:09:10.435
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

............... Read more

Read other 1 answers
RELEVANCY SCORE 86.8

I've never really given much thought to the Blue Screen of Death, just accepted it as something that comes with Windows. I'm on XP SP2 by the way. I saw a reply to a thread asking that person to post some minidump files to check with a debugger so can you check mine? It's started happening more frequently. I've attached the files from the past couple of weeks. If it helps, I wrote down the error message I got about an hour ago -

*** STOP: 0x0000007E (0xC0000005, 0x00D4D0C8, 0xF799BC84, 0xF799B980)

If you can help great, if not I've lived with it so far:).

Edit: only included the 5 most recent as only 5 attachments allowed.

A:[SOLVED] BSOD - minidump files attached

Hi and Welcome to TSF. . .

Yes, you did see "Minidumps Wanted" signs posted along the Interstates this week - I'm glad that you saw them! I just knew that this would turn out to be a good weekend afterall. . .

I will download your files and as time permits, run them through the debugger and post the reults. In the interim, can you provide any details as to what tasks you are generally performing when these BSOD's occur?
Also, are there any other problems with your system such as Windows Updates or System Restore not functioning? Now would be the ideal time to tell all.

Should you wish a status, feel free to send me a PM - anytime.

Regards. . .

jcgriff2

Read other 12 answers
RELEVANCY SCORE 86.8

Hi

Having an increasing amount of blue screen crashes recently, up to 3 a day sometimes. No new hardware or software installed recently and all virus definitions are up to date.

It seems to happen fairly randomly but I've noticed it more when opening quicktime movies for some reason, ...but other occasions have been whilst using adobe bridge and sometimes Lightwave3D.

I've attached the recent minidump files here, so if anyone can analyse them and tell me the cause of all these crashes I'd be very grateful.

Thanks in advance

Dan

A:BSOD: Can someone diagnose the fault from my minidump files?

The dump files that you uploaded date from May 09 (2) Jun09 (1) and Jul09 (4)
Are there any others on the system?
I'm running the last 5 (Jun & Jul) as I type this.....

Please update the following drivers. To do this, search google for the driver name to locate the device or program that uses it. Then locate the appropriate download for that and install it. Please note, in particular, that the SiWinAcc.sys driver ( SATALink Accelerator Driver from Silicon Image, Inc. ) is from 2004 (a cause for concern with Vista systems):

Code:
nvstor.sys Tue Oct 03 20:24:56 2006 nVidia Storage Driver
nvstor64.sys Sat Dec 23 11:07:42 2006 nVidia Storage Driver
SiWinAcc.sys Mon Nov 01 15:23:29 2004 Silicon Image Storage driver
HDAudBus.sys Tue Nov 27 18:24:06 2007 Audio driver
Rtlh64.sys Tue Sep 26 07:20:23 2006 Network driver
SiRemFil.sys Wed Oct 18 18:20:39 2006 likely related to the Silicon Image Storage Driver
nvm60x64.sys Sat Oct 07 00:31:34 2006 nVidia nForce Ethernet controller
lmimirr.sys Tue Apr 10 18:32:45 2007 LogMeIn Mirror Miniport Driver
HdAudio.sys Wed Nov 01 21:48:10 2006 Audio driver
Also, I'm concerned with the appearance of 2 networking drivers and 2 storage drivers. This is not necessarily an issue - but is a concern until we see otherwise. Please upload the data that's described in this post so we can check: http://www.techsupportforum.com/1871981-post2.html

Once the drivers are updated, please post back with any subsequent du... Read more

Read other 2 answers
RELEVANCY SCORE 86.8

I am constantly getting BSOD, mostly error code 0x000000C1. Just yesterday I got an error with win32.sys. From reading posts in this forum and others, it suggests analyzing the crash logs created in the minidump folder. I have done the steps to enable this but every time I get a BSOD, the screen displays the error codes and then,

The BSoD itself displays:
Collecting data for crash dump...
Initializing disk for crash dump...

I have tried waiting several hours to see if the log is created, but nothing changes.

If anyone could help, I would be very grateful.

A:Constant BSOD, minidump files not being created

Download BlueScreenView:
http://www.nirsoft.net/utils/blue_screen_view.html
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

Read other 7 answers
RELEVANCY SCORE 86.8

Hello from greece! Since i am new to the forum, i would like to greet you all!
I am experienced enough at computers meaning i got 6 years of experience, either working at tech shops or just fixing computers at my home for friends and family.
I've never met something like this before and i am quite unhappy about it, because this comp cost me a load of money i worked for.
Before 2 weeks, i had several problems when my pc without notice, blue screen or anything, started to reboot at random times. Note that i didnt have a blue screen nor any dump files. So i did a fresh install of windows 7 64bit(home prm).
And everything seemed fine for a couple of hours. Now i am getting this ntfs.sys and ntoskrnl.exe errors outa nowhere... (using Bluescreen viewer.)
I would realy appretiate it if someone could help me fix this!
the dump files are these.

Looking forward for an answer.
Dimitris.

A:Bsod errors included minidump files..

i am uploading soon 2 more dump files(just crashed) and the health status...

Read other 9 answers
RELEVANCY SCORE 86.8

Attachment 25954 Hello everyone recently i've been experiencing the happy face blue screen of death... randomly too started yesterday and now one today happened while i was sleeping and the computer was idle. I'm running Windows 8 on the Alienware Aurora R4 the specs are stock but i'll list them anyways I7 3.6ghz(OCed 4.1), 8gb ram, NVIDIA GTX 660 I've had problems before with windows 7 BSOD and i was tought to upload my minidump files for debugging so i will add them in here now i hope you guys can help me fix this problem many thanks so much! The minidump files are inside the folder of the zip i had errors with trying to upload the minidumps by themeselfs thank you guys so much ~ Brandon

A:HELP DEBUGGING BSOD (Please Diagnose my minidump files)

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.

Please provide this information so we can provide a complete analysis: Blue Screen of Death (BSOD) Posting Instructions

Both memory dumps blame USBXHCI.SYS
Check in Device Manager for problems with a USBXHCI device. If so, then right click on it and uninstall it (DO NOT remove the drivers) - then reboot to let Windows redetect it

Then check any other USB devices that you might have connected. This includes devices that are built into the system but still use the USB bus (webcam, touchpad, fingerprint reader, SD card reader, etc can all use USB or another bus).

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

CLVirtualDrive.sys Mon Dec 26 08:26:47 2011 (4EF87617)
CyberLink Virtual Device Driver
http://www.carrona.org/drivers/driver.php?id=CLVirtualDrive.sys

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Tue Aug 6 15:16:31.364 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\Sy... Read more

Read other 7 answers
RELEVANCY SCORE 86.8

New Board:
EP45-UD3P
New BC WD Hard Drive (tested)
GTX 275
8gig Corsair Memory

Decided after purchasing a bunch of new components, and all sorts of testing that this random BSOD on my Windows 7 x64 machine is driving me nuts.

Tested the Memory
New MB
Tested the HD
Updated all drivers as of today

This is killing me.

A:Reached end of rope. BSOD minidump files

  
Quote: Originally Posted by lkading


New Board:
EP45-UD3P
New BC WD Hard Drive (tested)
GTX 275
8gig Corsair Memory

Decided after purchasing a bunch of new components, and all sorts of testing that this random BSOD on my Windows 7 x64 machine is driving me nuts.

Tested the Memory
New MB
Tested the HD
Updated all drivers as of today

This is killing me.


Hi and welcome

These 4 crashes have several different causes. Most were caused by memory management. the rest caused by system files.
I realize that you have already run a memory test but you did not specify which one or for how long. We recommend downloading memtestx86 and running it for 5 passes.

For the system files I would run a system file test to verify and repair your system files

to do that type cmd in search>right click and run as admin>sfc /scannow (note the space between sfc and "/")

Let us know the results as you may have to re run the sfc.

ken

Code:
031910-23056-01.dmp 3/19/2010 3:43:24 PM PFN_LIST_CORRUPT 0x0000004e 00000000`00000002 00000000`00096025 00000000`0011ffff 00000000`00000001 ntoskrnl.exe ntoskrnl.exe+71f00 x64 C:\Users\K\Desktop\New folder (3)\031910-23056-01.dmp 2 15 7600
031910-23946-01.dmp 3/19/2010 3:54:42 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041287 00000000`00000030 00000000`00000000 00000000`00000000 ntoskrnl.exe ntos... Read more

Read other 3 answers
RELEVANCY SCORE 86.8

Help keep getting random restarts after blue screen, occationally get mini dump files. Memtest has run good numerous times. Any ideas? Thanks for the help.

A:Windows 7 BSOD Help Minidump files included

Hi,
Two of your dump files are corrupted, and the rest have 0x1a (MEMORY_MANAGEMENT), 0x3b (SYSTEM_SERVICE_EXCEPTION), 0x19(BAD_POOL_HEADER) and 0x24(NTFS_FILE_SYSTEM)

Start troubleshoot by perform hardrive diagnostic because you have NTFS issue.
1] Right click Command Prompt -> run as admin -> chkdsk /f /r
2] Then perform Manufacture Hardisk Diagnostic tools --> Sea tools

Also do System file checker and check whether you have corrupted windows files:
Right click Command Prompt -> run as admin -> sfc /scannow

Update this driver:

Code:
Rt64win7.sys Thu Aug 20 09:05:06 2009 --> Realtek NIC driver
Log

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {1904fb, fffff88002f9a898, fffff88002f9a100, fffff88001174dc1}

Probably caused by : Ntfs.sys ( Ntfs!TxfDeleteTxfFo+11 )

Followup: MachineOwner
---------
*******************************************************************************
* *
* Bugcheck Analysis ... Read more

Read other 2 answers
RELEVANCY SCORE 86

Hi,

I have tried everything and I still get the BSOD.

I am attaching the minidump files for anyone who knows how to read them.

I would love to know what the problem is and how to fix it.

Thanks,

Neu
 

A:Please help, BSOD 0x0000007E, specific minidump files attached

In case this info is necessary in regards to the question I asked;

Windows XP Service Pack 3
ASUS N10E
Intel Atom
N270 @ 1.6GHz
1GB of RAM
 

Read other 2 answers
RELEVANCY SCORE 86

I am not sure what has been happening i've been getting irq_less_than_equal BSOD and some random ones.

A:Windows 10 BSOD can't send minidump files or archive :(

it won't allow me to add Perfmon as itself or zipped by winrar or 7zip 

Read other 5 answers
RELEVANCY SCORE 86

I am trying to find the source of the recent Memory management crashes. I believe them to be caused by a faulty driver/ drivers, but I am having trouble finding which ones.
 
At first, I went through a driver verifier and thought it was nvidia's audio drivers(with someone else's help to analyze the minidumps), but even after a clean install, I am still getting a BSOD.
I have run a memtest and gotten no errors. The ram is only a year old, so I didn't suspect it in the first place.
 
Computer Spec:
Windows 10 Home Operating System
Giga P55-UD3L
Intel i5 750
8gb Corsair RAM
EVGA GTX 760
TP-Link wireless card
Seagate HDD 500gb
 
These are the two latest minidump files(latest being 18703-01).
https://dl.dropboxusercontent.com/u/96339554/110315-18703-01.dmp
https://dl.dropboxusercontent.com/u/96339554/110315-18390-01.dmp
 
Thank you in advance for the help.

Read other answers
RELEVANCY SCORE 86

ok, my mother's laptop (Dell, XPS m140) one day just got the BSOD and i've been looking up different ways to fix it but they all want me to disable my video driver or something but i don't have the disc itself to restore it. i do however understand about safe mode, the minidump files *which i will upload in my thread so you can hopefully help as well* and i have the BlueScreenView program on there and it says caused by "ntkrnlpa.exe" and "ataport.SYS" and "ntkrnlpa.exe" please somebody help?

A:BSOD (ntkrnlpa.exe and ataport.SYS) *minidump files included*

The first thing to check is whether the hard disk is physically connected to the motherboard properly. To do so:Shut down and turn off the computer
Remove the AC Adapter
Remove the battery
Hold down the power button for 15-30 seconds to close the circuit and drain any residual power
Remove the panel on the underside of the laptop where the hard disk is housed
Remove and re-insert the hard disk by sliding it away from the connector and then gently but firmly pressing it back into the connector (no screws should need to be removed to do this step)
Replace the panel on the underside of the laptop to cover the hard disk
Replace the battery
Replace the AC Adapter
Turn on the computer and see how it responds
Post back once these steps have been implemented whether the system is stable. Sometimes these crashes can occur due to a loose connection.

Read other 1 answers
RELEVANCY SCORE 86

Could someone who knows how to read these give me an idea what's causing them? I recently switched from win7 32bit to 64 bit and have had 7 BSODs since changing the OS. I checked the drivers on driver agent and all looks ok. I'd be grateful if someone could help me out with this.

Thanks for taking the time to look and respond!
 

A:Multiple BSOD from bugchecks - minidump files included

Your CPU supports 64-bit? Look in the device manager for any yellow exclamation points
 

Read other 6 answers