Over 1 million tech questions and answers.

Error - 0x800705AA when copying from client PC to Network Share

Q: Error - 0x800705AA when copying from client PC to Network Share

I have a custom built PC that I use for everything, running Windows 7 Ultimate x64. I also have a custom built server running Windows Server Essentials 2012 R2. The 2 are connected to a Gigabit Router, via Gigabit connections. The 2 have been working great together for many months. Now all of a sudden, these last few days I've been unable to transfer files from the client computer to the server. Whenever I do, I get this error message:

Code:
An unexpected error is keeping you from moving (copying) the file. If you
continue to receive this error, you can use the error code to search for
help with this problem.

Error 0x800705AA: Insufficient system resources exist to complete the
requested service.
I haven't really done anything different than I normally do, other than maybe install some Windows Updates. I haven't installed any new programs or hardware. All I'm trying to do is move some files over to my network share. The content doesn't seem to matter either. I can transfer small 1-2k text files ok, but anything larger like photos, documents, videos, etc throw up this error. I have noticed that it has a "Try Again" button, and sometimes clicking that works the first time, while other times I have to click it 4 or 5 times, but it does eventually transfer. I thought it might be a user privilege issue (like I don't have permission to move to THAT folder, etc) but I checked and my user account has full read/write capabilities to all folders on the share path. I'm not sure how I can be out of system resources.. Task manager shows I'm currently using about 30% of RAM and 0-1% CPU. I'm also not out of drive space on my computer or the server..

I ran a chkdsk on all my drives both server side and local, they all pass with no errors. I'm currently in the process of running an "sfc /scannow" on the local system. Wow, I actually didn't get a chance to see the results before the window closed (I ran it straight from Start, rather than a command prompt, me dummy!). But interestingly, the CBS.log it created is 647MB in size! I can't even open it. Wonder if there's a problem in there somewhere... I'll try and erase it and re-do the test tomorrow. I'm half asleep right now, need to go to bed. Hopefully somebody has a clue for me!

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Error - 0x800705AA when copying from client PC to Network Share

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 80.4

Hi All,

I'm having an issue when copying files from a Windows network share. If the file is above 5MB it will start copying and then after a minute or two I will get an error such as:

Interrupted Action
An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.

Error 0x8007003B: An unexpected network error occurred.

The network share is in a different office and is accessible over a point-to-point VPN, so the connection is not that fast. 


But before everyone tells me to start diagnosing the router and or VPN please take note of the following:

My colleague who is running Windows 7 can copy files from the network share fineIf I run a Windows 7 VM on my Windows 8.1 laptop I can copy the files across fine
I also know it isn't an issue with this particular file share. I set up a little lab, where I had one VM which had a shared folder and 2 other client VMs one running Windows 7 and one running Windows 8.1. I limited the bandwidth to the two client
VMs to a similar speed we see across our VPN. The result was that the Windows 8.1 failed with the same error above, whereas the Windows 7 copied fine.

There is also a noticeable difference visually when copying using Windows 8.1 and Windows 7:

Windows 7 - The progress bar progresses smoothly giving the current speed and estimated time remainingWindows 8.1 - The progress bar progresses in a jumpy fashi... Read more

Read other answers
RELEVANCY SCORE 80.4

This thread "Windows 8.1 Network Share 0x8007003b Error Copying Files" seems to have abruptly ended w/o conclusion.  I am having similar issue with file copy of smaller files (~2.5 MB) from laptop drive to WD Cloud Drive both devices on
same local WiFi network.  Same symptoms on graphical transfer progress stat.

Read other answers
RELEVANCY SCORE 68.4

I would appreciate any help troubleshooting the below issue.

I have a Mac Mini (running OS X) which has a USB Drive connected to it.

The Mac Mini's USB drive is mounted as a share in Windows 7 Ultimate 64x fully patched. I am running on a custom built machine that has been stable for years and have had no hardware changes in the last few months, the most recent being the addition of an Crucial M4 SSD as the boot drive.

I am copying (or trying to) 1.7TB of data from the mounted USB shared drive to a Synology Disk Station. I usually step away from the computer for an extended period of time as the transfer will take about 20 hours. When I go to check on the process the computer has restarted due to a BSOD. This has happened 2 times and I suspect will happen again.

To help troubleshoot I have uploaded the C:\Windows\Minidump\(3 files)
and The System Health Report per the BSOD Posting Instructions.

The MEMORY.DMP file is whopping 571MB (is that normal?) so I could not attach it. My expertise lies primarily in OS X, though I am in the process of moving over to Windows. Any help from the community would be greatly appreciated. If the MEMORY.DMP file is of importance I can find a way to get it to you.

Thanks,
Jeff

The Computer:
Mobo: GIGABYTE EP43-UD3L
CPU: Intel Core 2 Quad Q6600
Memory: 2x2GB Corsair 400.0 MHz (PC2-6400)/ 2x2GB Kingston 400.0 MHz (PC2-6400)
GPU:ATI Radeon HD 5770 (JUNIPER XT)
SSD Boot Drive:M4-CT256M4SSD2
NIC:RealTek Semiconductor RTL8168C/8111C PCI-E Giga... Read more

A:BSOD copying from Network Share to Synology DS1812+ NAS

Related to atikmpag.sys AMD multi-vendor Miniport Driver from Advanced Micro Devices, Inc.

In addition please remove and replace Zone Alarm with MSE.

And dtsoftbous01.sys (from the makers of daemon tools)
Update these drivers

Code:
vncmirror.sys 3/14/2008 1:43:05 PM fffff880`06d9b000 fffff880`06da2000 0x00007000 0x47dab929
Rt64win7.sys 2/26/2009 5:04:13 AM fffff880`06d16000 fffff880`06d48000 0x00032000 0x49a65b0d
GEARAspiWDM.sys 5/18/2009 8:17:04 AM fffff880`06d7e000 fffff880`06d8b000 0x0000d000 0x4a1151c0
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
Driver Reference Table (DRT)

Read other 4 answers
RELEVANCY SCORE 67.6

Hi friend..
I want to ask about how to share ad hoc network,,,
I have managed to make ad hoc,
but I want them to know my
wifi password, but they
could not connect to the internet

Read other answers
RELEVANCY SCORE 58.4

Almost everything time I try to access my htpc that has shares I get this error. I just keep clicking the folder and it will finally let me in. The PC is up and running so not sure why this does this almost everything I try to access the share.

My PC is windows 10 pro the HTPC is win7 ultimate.

Thank you,
 

Read other answers
RELEVANCY SCORE 55.2

I'm trying to use GetFolder method of the Scripting.FileSystemObject with Network shares. When running the ASP page a 500 server error is being displayed saying "Path not found". I've tried GetFolder with a network drive although this doesn't seem to work. I'm using classic ASP and IIS.
Any help is appreciated
 

Read other answers
RELEVANCY SCORE 55.2

Hello all, today I finally got around to creating a home network between my two desktops and laptop. Well, I set it up using the Network Setup Wizard, and then attempted to share my "My Music" folder (22 GB) and "My Videos" folder (12 GB). Well, when I went to Properties->Sharing and checked the "Share this folder on the network" tab, I got an error message stating:

An error occured while trying to share My Music. The Server service is not started.
The shared resource was not created at this time.

Anyone have any ideas?

Edit: I think I have found why I can't share files on this computer. When I go to My Network Places and click on "View workgroup computers", I get another message saying:
Mshome is not accessible. You might not have permission to use this netowrk resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found.

I found this odd because this was the first computer I setup for networking. I have also googled this message, and found that it is commonly caused by the Windows Firewall. I have the Windows Firewall deactivated, and instead I'm using Zone Alarm.

All help is appreciated. Thanks
 

A:Error When Trying to Share Folders on a Home Network

Probably, the server service stopped ('entered the stopped state') because Windows detected illegally downloaded music and video files. This is standard behaviour.
 

Read other 2 answers
RELEVANCY SCORE 54.4

Hi all, I have a weird problem. And also complicated, 'cos not even my CISCO Network teacher has been able to give me a solution. I think I need some smart people here

The thing is that I can't share my printer (connected by USB to my PC) with my laptop on another room, over the local network (in Win7 the name is Home Group).

The printer model is not relevant because time ago I was able to do what I'm trying now.

All my configurations are OK, at least the basic ones, because there's definetely something wrong with my PC, and here's why: if I take my laptop and put it next to the printer and connect it to it (by the same USB cable), I can access the printer with my PC, while it's been shared by the laptop.

That proves that the internal network is fine. Also, all the configurations of the printer and also of the home group are literally same in both PCs, the big one and the laptop.

Both PCs run Win7. I have tried this, Connect to printer error - Microsoft Windows Vista Community Forums - Vistaheads, but it didn't work.

The printer is also properly installed on my PC, it is not a driver problem or something like that.

My AV is ESET ESSBE 4, but I don't think it's related, because I have tried deactivating its firewall, and also, on the laptop the AV is the same and the
printer did work.

The services are also equal in both PC's now. I have even tried changing the network adaptor on my PC (from Ethernet to Wifi). Nothing.

I recently had problems with the home group, but ... Read more

A:Can't share printer on local network (0x00000012 error)

Do you have the Windows firewall turned on? If not you won't be able to share the printer until it's turned back on again.

Once that is done the link below shows some set up procedures that should work for you.

Can't share printer, get error

Read other 5 answers
RELEVANCY SCORE 54.4

Hi 
I'm experiencing a weird windows 7 copy error. 
I have a folder that will copy just fine onto another NTFS drive but will say "Error 0x80070032: The request is not supported." when I copy/paste onto my Network drive at E: (mounted using \\server\sharename on E: -- error is not specific to E:,
any other mount point will produce the same error). 
I tried giving generous permissions, removing attributes, etc. nothing worked. I can't reason why it would say this error only for this folder, the other folders are copying just fine.
The peculiar thing is -- If I use "robocopy" it copies just fine onto the network share (note that I'm not using any magical options with robocopy to do this), but it would simply fail when I use the windows explorer copy. 
"Robocopy" is a command I cannot train my users with. I need to know exactly what is causing this error so I can advice users in my homegroup so they can be successful copying to the network drive. Also, it's really very frustrating that a random
folder will fail to copy with this error and a user can just not figure what might cause this issue.
Please help!  Also, please note that I have tried all possible options such as disabling client smbv1, registry entries etc all mentioned on that one & only microsoft KB article that fails to provide a definitive solution. And YES I've tried to
check that Task Scheduler and Events Logger and relevant services are enable... Read more

Read other answers
RELEVANCY SCORE 54.4

I am able to connect from XP to a network share at my workplace by giving login/password. However, when I try to connect from Windows 7 i get the error: "specified authentication package is unknown"

However, I am able to connect to another shares. From XP no one is having any problems in connecting to this share at all.

Have googled but to no avail. Found one suggestion to add 'authentication packages' key to registry but it was already present in my Win 7 and with the correct value.

Any help would be appreciated as I am at my wits end with this issue. Win 7 is working flawlessly otherwise. Much much better than XP. Vista was pretty much unusable on my laptop (HP TC 4400 tabletpc)

A:Network Share Error: specified authentication package is unknown

ok, you have specified the problem, but gave no information on any setups of the network(s). how are other supposed to help you unless they have ran into the specific error that you specified?( which i myself do not recall running into)

Read other 5 answers
RELEVANCY SCORE 54.4

Hi,
One of the share path is working in Windows 10 and not working in Windows 7. 
I tired using the IP Address of the share path. Below error received.

Please help how to get this resolved.

Regards, Boopathi

Read other answers
RELEVANCY SCORE 54.4

I keep getting this error:

"Common Client Network Proxy Service has encountered a problem and needs to close. We are sorry for the inconvenience."

I have Windows XP SP2. DSL

details about the error:
szAppName : CCPROXY.EXE szAppVer : 2.1.6.3 szModName : PXYHTTP.DLL
szModVer : 2.1.6.3 offset : 000070d2

C:\DOCUME~1\Ian\LOCALS~1\Temp\WER301a.dir00\CCPROXY.EXE.mdmp
C:\DOCUME~1\Ian\LOCALS~1\Temp\WER301a.dir00\appcompat.txt
I believe it has something to do with Norton. CCPROXY.exe

When this error happens the internet stops working until i reboot.

So i went to services and had it restart the service everytime it fails for a temporary solution.

What is the permanant solution??

Thank you for taking the time to read my problem and thanks to whoever tries to help.

A:Common Client Network Proxy Service Error

Here is some more infomation on ccproxy.exe. This appears to be a third party proxy server. If you don't use it I would recommend uninstalling it. Especially if it is causing issues.http://www.youngzsoft.net/ccproxy/

Read other 21 answers
RELEVANCY SCORE 54

Hi

One of our users saves powerpoints onto a network share, she has been doing this for years, I upgraded her to office 07 yesterday and this morning she is reporting when she saves a file on the network share it reverts to the previous changes.

The thing is when you close the file and reopen after you have saved, the changes are there. But if you wait 30 seconds the changes are reverted back, has anyone come across this before? There is no error message and annoyingly it looks to have saved the file but it doesn't.

Anyone got any ideas, many thanks.

Windows 7 with Office 2007
Network share runs XP

A:Office 2007 not saving files on the network share, no error msg

I can't seem to delete this but I solved by disabling preview in the file explorer.

Read other 2 answers
RELEVANCY SCORE 54

Hi,
 
We are getting the following error when mapping to a network drive of a DFS share on Windows 7:
?The mapped network drive could not be created because the following error has occurred:

A specified logon session does not exist. It may already have been terminated."
In our case, the user logs on his workstation using his regular domain account, then maps to the network DFS share using the service account of an application.
There is a fix from Microsoft (MS KB968264). But this fix requires disabling the "Network access: Do not allow storage of credentials or .NET Passports for network authentication? property. This is against the Microsoft own best practices (Network access:
?Do not allow storage of passwords and credentials for network authentication? should be set to
ENABLED), and is NOT acceptable for us for obvious security reasons.
 
Question: Does anyone know an alternative fix to this issue that does not introduce security risks?
 
Thank you in advance!
Mdjona

Read other answers
RELEVANCY SCORE 54

Server: Windows Server 2012 Essentials
Client: Window10 Pro v1607 OS Build 14393.187

When attempting to create a folder [on client] in a network share - error received (after 30 seconds of explorer.exe hanging): "An unexpected error is keeping you from renaming this folder. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred."

When I watch the same network share from the server I can see the folder being created without delay. When I attempt to create a folder in the network share from the server no error is received. Folders created on the network share from the server are able to be renamed on the client side without error.

The below forum describes the problem fairly well although several people report varying environments:
Problem creating/renaming a folder on a network share with Win10 Anniversary Update (Error 0x8007003B).

Any help here would be appreciated!

A:Problem creating a folder on a network share (Error 0x8007003B)

Bueller? ...... Bueller? ....... Bueller? ........

Read other 1 answers
RELEVANCY SCORE 54

Avg found two trojans. It didn't seem like it removed them. Internet was working though. Ran malwarebytes it found nothing. Internet was still working. Started Having connectivity issues. My dhcp client service won't start. I got a 1075 error. my internet via wifi or wired. I ran the following command prompts:
net start AFD (response: the requested has already been started)
netsh int ip reset reset.log (response: resetting echo request, failed. Access is denied. Rebooting interface, ok! A reboot is required to complete this action.
netsh winsock reset catalog (response: successfully reset the winsock catalog. You must restart the computer in order to complete the reset.
SFC /SCANNOW (scan finishes and shows this response: windows resource protection found corrupt files but was unable to fix some of them. Details are included in the cbs.log windir\logs\cbs\cbs.log

What now? Please help.
 

A:Network issue dhcp client service error 1075

I'm thinking you're still infected.

----------------------------------------------------------------------

You need to start a thread in the Virus & Other Malware Removal section of this site.

Before you post though, you need to read THIS guide.
 

Read other 1 answers
RELEVANCY SCORE 54

I have a unusual case where I need to setup two mapped network drives as two different users to the same share location. When I attempt to map the second drive after inputting the user name and password the system goes on its merry way for a few seconds
and then returns me back to the username/password input.
If I change the second mapped network drive to use the IP address the two shares work happily. If I manipulate the host file and point two paths to the same address then I can also work around this problem. However, I would simply like to know why I am blocked
from setting two mapped drives to point to the same share with different credentials? 
e.g.
TestFolder on TestServer is shared to TestUser1 & TestUser2 where the IP of TestServer is 192.168.0.2.
Case1
If I map S: to \\TestServer\TestFolder using TestUser1, if I then map T: to \\TestServer\TestFolder using TestUser2 it will not work. 
Case2
Mapping S: to \\TestServer\TestFolder using TestUser1, if I then map T: to \\192.168.0.2\TestFolder using TestUser2 it will work and I can access the folder as the two different users.
Case 3
If I map S: to \\TestServer\TestFolder using TestUser1, if I then map T: to \\TestServer\TestFolder using TestUser1 it will also work (but I am accessing S: & T: as the same user). 
Why do cases 2 + 3 work, but case 1 does not? 

Read other answers
RELEVANCY SCORE 53.2

Ive finally managed to set up the router so that my pc (lets name it 1, running Windows Home) can connect to the internet. Im using an 8-port cable/dsl router (Linksys).

Ive now connected my laptop (running Windows XP) to the router, and cannot seem to access Internet.

All pings work, my pc (1) found my laptop, my laptop found pc(1), however i still cant access the internet. Please help
 

A:Cant share internet on my client

Read other 8 answers
RELEVANCY SCORE 53.2

Hi,
I have a small LAN with five PC's (two Windows 10 and three Windows 7).  I have assigned all of these PC's to the same Workgroup (which I named "MAIN").  All five PC's are set to Obtain an IP address automatically.  My wireless router
assigns each PC with an address in the range 192.168.2.x.  The router itself is at at address 192.168.2.1.  I have created shares on all five PC's by right-clicking on the folder I'd like to share and choosing Properties.  On the Sharing tab,
I chose "Advanced Sharing" and clicked the checkbox for "Share this folder".  I assigned it a share name and added Full Control permissions for both the local Administrators group and also for one particular user (who happens to be
a member of the local administrators group).  On the Security tab, I also assigned Full Control permissions to the local Administrators group and for the same particular user as on the Sharing tab.  In Control Panel | Network and Sharing Center |
Advanced Sharing Settings, for my current profile (which happens to be work), I have Network Discovery ON, File & Printer Sharing ON, Public Folder Sharing OFF, Media Streaming OFF, File Sharing connections set to 128-bit encryption, password protected
sharing ON, and I have selected "Allow Windows to manage homegroup connections".  I have used these same settings on all five PC's and my shares work just fine on four out of the fi... Read more

Read other answers
RELEVANCY SCORE 53.2

Need a little help. I have three W7 Home Premium Systems running on a gigabit network. When I copy a huge Acronis backup files (20+GB) from system B (using Windows Explorer on System B) to system A it runs at 40+ MB/Sec and quickly fails with the 0x800705AA error code. When I copy the same file from from system B (using Windows Explorer on System A) to system A it runs at 90+ MB/Sec and completes normally. This error seems to be a pretty common problem based on Bing and Google searches. Can someone please give me a hint on what is going on and where I can find a reputable W7 fix. I have never seen this error on any of the systems until today but then I don't normally move backup files from one computer to another.

A:0x800705AA Insufficient System Resources

A little more information - both systems are running Windows 7 Home Premium 64-bit, both systems have 4 GB of memory and both systems are using a EP45-UD3P motherboard. The only difference is system A has BIOS version FD and system B has the latest and greatest BIOS version FE. System A Has a Q9550 processor and system B has a E6750 processor.

Read other 8 answers
RELEVANCY SCORE 53.2

I have saved 82 pics on my easyshare project file some from camera and some from scanning in and i want to burn to a dvd. The problem is that they must be in the same order and yet everytime i try this the dvd shows pictures in a different order. I have tried updating the date taken on each picture which at least keeps them in the correct order on easyshare but HOW DO I GET THEM TO SAVE TO DVD IN THAT ORDER
 

A:Copying pics from Kodak easy share to DVD

What program are you using to burn with?

I'll tell you how I solve that problem, may or may not be for you. This only works properly in XP as far as I know, and if all the pics are the same format. I copy the pictures I want ordered to a new folder (so the original named files stay where they are).

In the new folder of pictures I choose the icon view and arrange the photos in the order I want them to be left to right, top to bottom. Then I select them all and right clicking on the first pic I choose rename... and name them something like DVDphoto (100).jpg.
The number in the parenthesis is your starting number and xp will renumber all the photos based on that starting number and that becomes the new order key since all the photos will now have the same name except for the number.

Then if the burning program is keying on filename, which I suspect it is (or disregard this method), you should be good to go.
 

Read other 3 answers
RELEVANCY SCORE 53.2

Greetings,
I have an odd issue.. a user reports that they are unable to access a network shared folder from their PC. Here is what I have gathered so far:
-The network share is from their PC located at C:\SQL2014. The share name is SQL2014. Their hostname for this example is "ABC".
-If I attempt to connect to the share from the user's PC ABC to \\ABC\SQL2014 I get the generic error:
  "Windows cannot access \\ABC\SQL2014
   You do not have permission to access \\ABC\SQL2014. Contact your network administrator to request access."
-If I attempt to connect to the share by ABC's IP \\192.168.1.140\SQL2014 I can access it.
-If I attempt to connect to the share by ABC's FQDN at  \\ABC.domain.com\SQL2014 I can access it.
-If I map ABC\SQL2014 as a drive letter, I can access it.
-Connecting to this share works fine from any other PC other than ABC.
-I've confirmed the error is affecting any profile old or new on ABC, which means it is a PC-wide issue on ABC.
-If I share C:\SQL2014 as ANY OTHER NAME OTHER THAN SQL2014, I can access it. As in if I share C:\SQL2014 with the share name SQL2014a, I can access \\ABC\SQL2014a.
-Deleted the share and recreated - same issue.
-Created C:\Test and shared it as SQL2014, cannot access \\ABC\SQL2014. It is NOT an issue with the actual SQL2014 folder.

From internet searches I've found the following solutions do not affect my case:
-Clearing CSC/Offline cache (most common working solution)
-C... Read more

Read other answers
RELEVANCY SCORE 52.8

hey guys,

i need to find some data on the market share of various email clients.

what % use outlook, thunderbird, webmail, etc.

basically any statistics about email use would be helpful, any ideas on where to look?

thanks!

A:Email Client Market Share

A short Google search confirmed my previous experiences on developing these kinds of statistics. One has to pay to glean the information. Companies like "The Radicati Group, Inc", a technology market research firm, provide reports on this kind of information at several thousand dollars each licensed copy. I did find one small site that comments on it's noted browser usage over a short period of time. http://meyerweb.com/eric/thoughts/2004/12/...hare-dont-care/ Note the author's comment about share's being relative.... Hopefully, another here might steer you to another source of information. Good luck in your search.

Read other 3 answers
RELEVANCY SCORE 52.4

I am running vista on the host and xp on the client for ICS. I know all cables etc are good, it worked fine untill we got a new computer with vista as the host. Now with Vista I can see and share files fine, but no internet. When I share the internet, the host loses internet, until I take it off. Any Idea?

I've tried everything I could think of and it's been this way since we go tthe new machine with Vista. It was working fine with XP to XP.
---------------------------------------
Vista Host:

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\BEN>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : KITCHENCOM
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . :
System Quarantine State . . . . . : Not Restricted
Ethernet adapter Local Area Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VisionNet ADSL 101U Adapter
Physical Address. . . . . . . . . : 00-01-E1-03-01-A4
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::64fb:24cc:76e1:1258%9(Preferred)
IPv4 Address. . . . . . . . . . . : 69.66.127.90(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.248.0
Lease Obtained. . . . . . . . . . : Tuesday, June 12, 2007 6:19:45 PM
Lease... Read more

A:Vista Host Won't Share Internet with XP Client

I just thought I'd update this in case anyone else ends up in the same boat. By default my network was on public and the connection wouldn't work. In the process of trying to find the setting blocking it, I made the shared connection (default private) public too figuring that would be correct. The thought process was that public means anything goes, so the internet should flow and share without anything blocking it (not the case apparently). After a couple days of trying every solution possible (assigning static ip's, bridging connections and others I'd seen from google searches), I decided to change the main connection to 'Private' and of course it worked. Just a simple setting, but it had me stumped and I'm probably not the only one. The shared connection STILL says 'Local Only' where the host says 'Local and Internet" ... but it works. I'm not sure if that is saying that it doesn't have it's own internet connection or for some reason it just works. This is my first plunge into Vista.

Just to reiiterate my problems were I could see and share files with a Vista host and XP client, but no internet on client. I would share the internet like any other version of ICS and then the host wouldn't have internet...neither would the XP client.
 

Read other 1 answers
RELEVANCY SCORE 52.4

Hello,

I'm trying to map a network drive from my windows client running Windows 7 Enterprise. The folder is a Samba share on a linux (Fedora core 13) server. When I attempt to map the drive using the folder \\10.1.1.131\earth, I get the message via a dialog box:

Y:\ is not accessible
an unexpected network error occurred

From the explorer window, it appears like the drive got mapped (green line is on) but when I click it on, I get the same message as above.

I can map the Samba share just fine on machines running Vista Home premium and XP professional but I can't get it to work on my Windows 7 box. I'm figuring that the problem is on the Windows side and not on the Linux side since I can map the drive on other machines using different Windows OS.

I've tried all the suggestions of setting the various network security and network access options in the policy editor and nothing seems to work.

If anyone can offer any suggestions or help, it would be most appreciated...

Thanks!

A:samba share is not accessible from Windows 7 client...

Might I point you towards this thread? Simpler than proposing you try the different solutions suggested there, one by one.

Read other 9 answers
RELEVANCY SCORE 52.4

I am running a weather program (AS2012) on a client for Flight Simulator X (FSX) on the server. The client connects to the server by Simconnect.
Both machines run W7 Home Premium x64 and I run them with full Administrator permissions.
 
The SimConnect.ini file is located in a folder on the server:  C:\Users\FSX_XPlane\My Documents\Flight Simulator X\
This is shared across the network with Full Control for Everyone. The owner is FSX_XPlane.
 
I can access and open the simconnect.ini file from the client. 
 
When I run the weather program on the client it does not connect to FSX on the server.  The system log shows that the path to the simconnect.ini file is not set (attached - time 23:06:44:0096).
The other required simconnect file paths are correctly identified. 
 
If anyone can suggest an explanation for this, and a fix, I'd be grateful.
 
Regards,
 
John

Read other answers
RELEVANCY SCORE 52.4

I have a NT4 server and recently added 2 WinXp pc's to my domain, but they seem slower than my old NT4 and W2K workstation. It takes about 60sec to open a word document from a network share on the server, and only when I haven't been working on my pc for a while. Opening a second one goes at normal speed, Xp seems to need some time to reconnect to the server share I think. Anyone have an idea how to fix this?
Thx
 

Read other answers
RELEVANCY SCORE 51.6

Hi All,
  I have very strange issue with DFS share access. I got few sites and two dfs servers. share freeze for all the locations.

  I have captured the client and server and share the capture.
Server Side
Client Side
 Pls help me to identify the issues.
As


 

Read other answers
RELEVANCY SCORE 50

I have a windows network. 4 Computers are Win98SE #1, Win98SE #2, XPsr2 #1 and XP sr2#2. I have USB printers attached to 98SE #1 and XPsr2 #1. Printers are shared. System in place for approx. 2yrs and has worked fine. About 3 weeks ago XPsr2 #1 had difficulty accessing the printer on Win98Se #1. Access became very slow. No other computers were affected and all file sharing btwn all computers worked fine. On XP 1, I removed and reinstalled the 98se1 printer many times with no luck. I completely uninstalled the USB printer on Win #1, removed all drivers and then did a new install. I opened it as a share. All the other computers found it and added it to their printers. Xp#1 "sees it" but when I try to access it the XP#1 computer freezes, even by trying to print a blank page from wordpad/notepad. I hooked an old parallel HP111p to Win #1. XP1 sees it but accesses it very slowly. XP1 prints fine to the printer attached to it. I have scanned for virus/worms etc with latest edition of Symantec. The whole system is behind a Linksys firewall. I plugged my network cable into different ports.
What I do know is that:
system used to work,
printer is freely accessible to the other computers,
regular file sharing btwn all computers works fine,
my other XP computer is virtually identical to XP1 and it accessess the printer fine,
the printer works fine from instructions from its own computer,
I have not added any software to either of the affected computers.

What will not happen is... Read more

A:file share fine access btwn one client and host printer failed

Read other 9 answers
RELEVANCY SCORE 49.2

i have the server with windows 2003 SP1 and i executed replication active directory, domain controller on the new server, as i have two servers. all expect one client computer work ok.onthe problematically computer is with the windows me.
problem is:
when i shut down old server,the computer with win me drop out from domain and he don't see new server.when i power on old server the client computer work ok.i deinstalled the win me on this computer and i installed to him win xp pro but problem is same. this computer don't see new server and he don't see others client computers in network.
what i do?
i tryed to make new user account but nothing i can't because of this computer don't see new server.
on client computer light green indicator on network adapter (Realtek 8139d) all the time.
i use commands: ping with the ip address of server, with the name of server nothing, ipconfig /release, ipconfig /renew, ipconfig /flushdns, ipconfig /registerdns.

ip address of old server is 192.168.0.100 and new server 192.168.0.101.
maybe problem is when i type ipconfig in dosprompt on new server
i receive: DNS server 192.168.0.100 and DHCP 192.168.0.100

plz help me thanks
 

Read other answers
RELEVANCY SCORE 49.2

Hello guys, I've been racking my brain trying to solve this problem for months, with no posted internet solutions working.

Problem: Attempting to copy files from a mounted network server to an HP Ultrium 6250 tape drive results in Windows security errors and prevents copying from working. It appears to be a mix of internet security settings
or permissions related, and nothing changed has worked yet.

Running Windows 8.1, and the drive has simply been mounted via map network drive as the IP of the server \\192.x.x.x with appropriate credentials. The system is able to work with files in every other regard, copy and paste locally, etc. Trying to
do the same through the tape drive is the only related "Security error" we've encountered.

This is what happens:

Windows Security
"These files might be harmful to your computer.
Your internet security settings suggest that one or more files might be harmful to your computer. Would you like to continue?"



Clicking OK results in a second warning dialog:

"An unexpected error is preventing you from copying the file. 

0x8007003A: The specified server cannot complete the operation."

Try Again, Skip or Cancel

Clicking anything but cancel will continuously pop the same dialog up for every single file. It starts with .DS_Store files, as some directories were created via OSX, but this shouldn't be a problem in theory. The server is OSX Server running on
Yosemite, conne... Read more

Read other answers
RELEVANCY SCORE 48.4

Subject
Cannot access NAS Drives
Cannot access network attached storage
Error accessing NAS
\\Share\Folder is not accessible
Error code: 0X80070035 The network path was not found

Hi all,
I fixed a stubborn networking issue and hopefully someone else can benefit from all the frustration I have experienced over the last few days.

Some background. This was a workgroup network not a domain client/server. 
Also, Windows HomeGroup wizards were not used - just accounts and passwords. 
I have five NAS boxes for storage and backup. These NAS boxes use CIFS or SMB file systems. IP address are assigned through DHCP. It is a very simple yet secure workgroup net. Everything was OK then it hit the fan.
I installed a new router after the old one failed. I powered down the entire network, cabled up and configured the new router. On my old Vista notebook PC all five NAS devices were OK. In Vista, Windows Explorer, I could access all the folders and files
on all the NAS boxes.
However on all the other systems, Windows 7 or Windows 8, I would get errors. In Windows Explorer I could see "\\MyNAS\Share\" but cannot navigate to it. 

I would get an error:
"\\MyNAS\Share\ is not accessible. You might not have permission to use this network resource. The specified network name is no longer available."
Or
"Error code: 0x80070035 The network path was not found"
Another symptom of the error: I could not access the NAS adm... Read more

Read other answers
RELEVANCY SCORE 47.6

1)
I have created an ad hoc wireless network by the name "Trial1" and created a network key as "letstry99".

Now I am trying to login to this network from other computer which is in the same room at 5 ft distance. This ad hoc network appears in the list of available networks. When I try to login, it asks for the network key. I provided network key and then confirmed it, now when I click connect, instead of getting connected to first computer I am getting pop up window mwssage.
In the title bar of the pop window it says "Wireless configuration"
In the message it reads "The network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters."

Then I changed network key to "letstry99999" (i.e. exactly 13 ascii characters) and now I am able to connect to the ad hboc wireless network of first computer.

Does it mean that network key has to bne exactly 5 or 13 ascii characters and nothing else than that. If not, then "letstry99" network key has ascii characters between 5 and 13 ascii characters, then why am I getting this kind of message ?

2)
But now I can not browse files of fisrt computer from second computer or vice versa.

When I am connnected to ad hoic network and open network and sharing center, I see only one link "My computer -> internet" which is broken. Usually the link diagram ... Read more

Read other answers
RELEVANCY SCORE 47.6

Hi
I have a program used by several users and it is placed on a network share so they can share the data in the folder.
The application have to contact a Oracle Database sometimes. The application worked under Windows XP, but now we are migrating to Windows 7.
When I run the application from the network share as a administrator everything is working perfectly.
If I run the application as a user the application start and everything looks fine until the application have to contact the Oracle server - No connection to the server.
If I copy the application to the local disk everything works perfectly for the user account.
I have tried to do the same with Putty from a network share and it is the same problem when trying to connect to a host.
- I have added the UNC to IE Intranet sites but it dosent help.
- Firewall off dosent help
- Uninstall AV dosent help
- Adding the user account to local admin group dosent help
- Disabled UAC dosent help.
I hope someone can point me in the right direction...

Read other answers
RELEVANCY SCORE 47.6

hello engineers,
how r yo all? Guys i need your help.
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition . This is not a small network, one of the biggest network.
i have doubt on individual users on domain.before 2 months we had department wise users mean, for example [email protected] But after we created the individual users like [email protected] to all users.
this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
we r a big company ,producing daily basis.hmmmm Openly very large media and press company. please any one know the exact problem? Thanks

A:windows 7 client and 2003 server: network Slow in very big Network !!

Hi Mohamed and Welcome to SF,

Pls. check your Server's Event Viewers error logs, especially DNS errors.

What type of Security or AV Software do you have installed in your Server?

Will it be possible for you to post an ipconfig /all output of one Win7 machine and the Server?

Read other 5 answers
RELEVANCY SCORE 47.6

Hello,

due to the fact that we are a small business firm and don't have a server OS I'd like to create a network drive folder tree for Lawyers, Secretaries etc. with different access rights and so on.

On our Storage-Workstation I'm able to deny access or free access to folders completely, but if I wanna allow access only for special users, I don't succeed.

I can specify groups and users in Computer management - Local users and groups, but I can't include the computers of our workgroup, I don't see them, only the workstation pc name is given. Can somebody help me?
 

A:Client-based network for small business with network-drives (without using AD)

Read other 16 answers
RELEVANCY SCORE 47.2

I've just had a new PC built for me, for the first time rather than build it myself I aid a local shop, and it's a pretty nice machine. They got windows up and running, when I got it back and lugged it in I don't even remember it asking about whether my network was home, work or public (I may be mistaken about that)

A lot of the networking is fine, by adding 'everyone' to the share, and joining the same homegroup as my laptop, I managed to get each to see their desktops, so I'm up and running with most of my workflow. But there's a couple of things not quite right about the network:

I've got a Xerox Phaser 60 network printer. It's got a simple 'walk-up' installer where you get the windows software into listening mode and then on the printer's menu initiate the connection. This doesn't find the printer. Even choosing the manual option of inputting the ip won't find it. So I've had to connect it with USB, not the end of the world, but shows that something's not right.

I have a lot of media on a dlna server in my home. Setting up kodi to find it, the SMB devices didn't show the host. Though, manually typing the IP in this case did find it. Lucky I knew the IP. Weird

And trying to FTP to my website fails too. It says "EAI_FAIL - Nonrecoverable failure in name resolution" Yet the same settings on my laptop (imported from the laptop) connects fine.

Surely there's something not quite right. Is there a way to reset all the network connection settings to default 'out of... Read more

A:New W7 64 install -network issues? Network printer, SMB share & others

OK, I just rethought it a little and added filezilla to the firewall exceptions list. Now t's working! I wonder if the same would fix the printer issue?

Read other 2 answers
RELEVANCY SCORE 46

When trying to add users to a shared folder, on a server, a problem occurs in that instead of showing the user name in the security tab of the folder we get the SID (S-1-5-21-####). This happens for all users we try to add. And for users in the same and different domains. We can sign on to the users PC/servers and the server with the shared folder with no problem . There seems to be no problems with the users PC/server. The user from another domain can see a shared folder, on another server, in the same domain as the server with the problem.
Does anyone know how to resolve this problem?
 

Read other answers
RELEVANCY SCORE 44.4

Hi,
I have a samba shared directory (from linux) that I can see from windows 7 and where I stored some video files.
Is it possible to share that directory from windows 7 over the network as dlna / stream?
I've tried to create a shortcut of the samba path in videos directory but I can't see that path from my dlna device in the same network.
Thanks!

Read other answers
RELEVANCY SCORE 44.4

We currently added a windows 10 desktop and it found 4 out of the 8 client pc's we have.  Why can I not see the rest which are running windows 7 or older

thanks

Read other answers
RELEVANCY SCORE 44

Hey guys, this has been bothering me for SO long, please help!!. Ok, so on my home network, I have my Vista laptop (which is the computer I'm on now, and mainly use) and an XP Desktop machine. I use my XP computer to download all of my music, so whenever I get new music, I want to transfer it to my laptop. On my laptop, I have a shortcut to my desktop's music folder, which is a shared folder, so I can easily transfer songs and what not. Here is my problem: Whenever I try to copy/transfer a NEW song from my desktop over to my laptop, an error comes up saying "You need permission to perform this action". The reason I bolded "new" is because the error only comes up when I try to copy a new song over to my laptop! If I copy a song older than around 2 weeks, it works perfectly, no errors or anything. Trust me, I have all the sharing options enabled and everything like that. The new songs are able to be shared and they aren't "read only". So whenever I get a new song and need to put it on my laptop, I always have to go on my desktop computer, copy and paste the song (make a duplicate) to another shared network folder, then go on my laptop and copy it from there, and that works. I have no idea why. So my question in a nutshell, why can I not transfer NEW songs from one computer to another, unless I make a duplicate of the file, over my home network?


-Taylor
 

A:Copying *NEW* files over my network?!?

Read other 9 answers
RELEVANCY SCORE 44

I have two PCs running XP Pro networked with a router and
DSL connection. PC1 is an ftp server. I can copy and
paste from PC1 to anywhere on the network no problem, but
from PC2 I cannot copy files from PC1. I get the
following error:
"Cannot copy (filename): Cannot find the specified file.
Make sure you specify the correct path and file name."

I have re-setup the network several times, and put another
PC on the network, it could not copy from PC1 either.
There is no firewall other than the router.

Thanks for any help.

ether
.

I am running XP Pro on both
 

A:Copying files over network

Actually, you may have the XP firewall running, which would screw up the works.

Right click on My Network Places, select Properties.
Right click on Local Area Network, select Properties.
Select the advanced tab, and turn off the firewall.
Do this on both machines.
 

Read other 1 answers
RELEVANCY SCORE 44

I have a small home network in which I often copy or move files from one computer to another.

Recently I noticed that there is a problem copying MPG and WMV files from other computers to one running Vista Home premium. I get the message: "You must have permission to perform this action".

Permission from whom? I am the administrator. There is no problem performing this action with TXT, DOC, JPG, EXE or any other file type. What is the problem with these video file types and how do I fix it?

My present work around is copying to a flash drive and using that copy to transfer MPG and WMV files to the Vista computer.
 

A:Copying files over network

Read other 7 answers
RELEVANCY SCORE 43.6

Hi guys,

I have a computer and a laptop hooked up to a router and I'd like to transfer some folders from one to the other. I read around some other forums and they said to set the sharing n security to share the folder over a network etc... but ummm they stopped there....
So now, it's in the computer's my network places..... what do I do from here? how do I access it from the laptop

Thank you
 

A:share in my network

Read other 16 answers
RELEVANCY SCORE 43.6

Hi,

I have a wireless sitecom router.
I want to connect xbox to PC, to do that i need to share lan connection that xbox can see it. When i try to do it, it says that is not possible, does not give any mistake or whatsoever. I also have two other laptops, one also vista with the same edition, and other XP, both of them have no problems with sharing.
It seems strange cuz i CAN share wireless connection, but not lan
Any idea how to fix it?

thanks

Read other answers