Over 1 million tech questions and answers.

Harddisk not accessible

Q: Harddisk not accessible

Hi,

My laptop internal harddisk is not accessible. The laptop was switched ON and I was holding it in my hand. Suddenly it slipped and fell down. Since then, the harddisk is not accessible. Windows and BIOS are not detecting the harddisc. So, I bought a new harddisc and replaced it with the old one. Then I connected the inaccessible harddisc to the laptop via USB port by purchasing a harddisc casing and connector. But the disc did not get detected. I didnt see it in disk management. I use windows 7 OS. The connector cable I purchased is Y shaped at one end with two USB connectors. The other end has only one connector which goes to the hard disc.
I have data in the harddisc and I need to recover it. Is there any way I can access the harddisc? Please help!

Thanks & Regards,
Phani

RELEVANCY SCORE 200
Preferred Solution: Harddisk not accessible

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Harddisk not accessible

First did you use the Usb plug with 2 wires at the computer end ? If not please do so. Also, try it with both Usb plugs in ports at the PC end.

If that doesn't help it looks like the drive is too badly damaged to work.

EDIT : Oh and welcome to TSG

Read other 3 answers
RELEVANCY SCORE 64.8

my WD harddisk became inaccessible after I got a game copied into it

when I connected it to my laptop, there's no autoplay and when I tried to open it via my computer, it says;
G:\ is not accessible

error performing inpage operation
I can't open it, and I can't scan it also
it is new so I don't think it's because of the age
using XP here
I have no idea what's going on
anyone?
 

A:external harddisk not accessible

External drives are generally less reliable than internal ones. This is because of the connection interface inside the enclosure, rarely is it actually the drive itself. That's why the problem plagues external drives (all makes, not just WD) as compared to internal ones. Some say it's because the small enclosure (compared to a PC) restricts heat dissipation, especially in external drives without a cooling fan (and most don't have one).

Since it's new I would return it, either to the shop or to WD (you'll need to contact WD and ask for authorisation (an RMA) before returning it for replacement.
 

Read other 2 answers
RELEVANCY SCORE 48.8

Hello all,

I need some advice.

I recently replaced my old harddisk to a new harddisk. The old harddisk has windows xp home and other programs installed.

I did not format the old harddisk, I only took out the old harddisk and replaced it with a new harddisk. I then installed windows xp home to the new harddisk.

While I am installing programs on the new harddisk, I discovered that one of the programs do not allow me to activate the program license because I have previously activated the program on my old windows. I need to do a proper uninstallation to release the license, then I can activate the license of the program in the new harddisk.

My question is, can I take out my current new harddisk, replace it with the old harddisk, boot up as normal into the old harddisk windows, uninstall the program inside the old harddisk, then replace the old hardisk with my new harddisk again.

Will I be able to access the old windows on the old harddisk?
Will it mess up my current windows/programs settings?
Will my current new harddisk windows be able to work as normal after accessing the old harddisk windows?
I thought of accessing the old harddisk as a slave, but I do not know if it is possible to access the old harddisk and do a proper uninstall of the program?
Is there any better way of uninstalling the program on my old harddisk?

Thanks in advance.

A:Accessing Win XP on old harddisk to uninstall programs after installing new harddisk

you have to swap out the drive completely. at no time should you have both hdd plugged in.

repeat, do not run them as master and slave. run each hdd individually at each time only.........

Read other 5 answers
RELEVANCY SCORE 48.8

I have 40GB harddisk and now I am moving to 120GB SATA hardisk. But i want all the data with softwares, plugins and all the windows settings to be transferred in the 120 GB harddisk.

There is any way so that all files and setttings will transferred and I dont have to install everything again.

In my system Windows XP Pro SP1 is installed.
 

A:Transfer data/settings from small harddisk to big harddisk

Read other 6 answers
RELEVANCY SCORE 43.2

We resently moved a network drive to another server, but all the links were kept in place (to redirect to the new location) and the logon script was rewritten to reflect the new location. All of our XP stations no trouble at all accessing the drive/folders in their new location, but our NT stations cannot access it at all. During the login, the script maps all the drives except that one, manually mapping the drive doesn't work and trying to link to it doesn't work either.

Does anyone know what would cause the NT stations to not be able to see the network drive in it's new location, but XP stations to see it just fine?

Thank you.
 

A:Network drive NOT accessible through NT, but accessible through XP

Read other 6 answers
RELEVANCY SCORE 39.6

hi all,

I got a couple of Trojans in my external HD and already removed them and now is clean. However all my folders are grayed out, see the photo, and the strange thing is that I can access them on a PC but I can't even see them from a MAC!
The only normal looking folder is due to the fact that I moved some files from the grayed ones into this one after removing the trojans, so this folder is accessible from the MAC, however although I removed the treats, the files remain grayed and non accessible from MAC
the hard drive is clean... so how can I un-gray the folders and return things tonormal?

thank you!
 

Read other answers
RELEVANCY SCORE 34

Hello,
a week ago i transferred a list of archived files to my mp4, then the light went off ,when it came back, i can't find the archives on the partition , nor the mp4

also some sound files disappered from the mp4, also files are occupying space whether on the hard disk or the mp4

i tried to show hidden files, but i still can't find the files

so what's wrong ?? , how can i get the files again ??? because the computer shows that they are still occupying space

thanks in advance

Best regards,

A:HardDisk & MP4

  
Quote: Originally Posted by Mitooo


Hello,
a week ago i transferred a list of archived files to my mp4, then the light went off


Hi.

Does that mean you lost power to your computer or drive?







  
Quote: Originally Posted by Mitooo


because the computer shows that they are still occupying space


If you lost power whilst transferring, there is a good chance some of the files will have become corrupt.

Read other 5 answers
RELEVANCY SCORE 34

Hello,

Re: Win98SE - Intel 465 Mhz

The harddisk in my PC is 8 GB of which only 2,56 GB is still available now.
From I similar PC (done away in the meantime) I still have a 8 GB IDE harddisk.
and want to place it in my PC.
Please mind that I have never opened a PC sofar.

a) I don't know to what electronic circuit-cable it must be connected (wondering about serial and parallel)

b) then this second harddisk must somehow be connected to and made visisable to the system (by cables I think; however what cables, new ones or
already present)

When I tried to google this subject I only found items on partitioning etc, not
about how to get and connect a second harddisk inside a PC.
Furthermore I have no idea whether there are special well-known problems
related to having a seond harddisk installed (e.g. very slow system)

Advises will be highly aprreciated.

Best regards,
a.ruiter
 

A:add a second harddisk

This may help http://www.perfectdrivers.com/howto/seconddrive.html
 

Read other 3 answers
RELEVANCY SCORE 34

My computer came with a 10gig hardrive with Windows Me preinstalled. I upgraded to Windows XP Home Edition and have been very impressed it was well worth the 90 I payed for the upgrade pack! I purchased 64MB of RAM to bring my memory from 64MB to 128MB and my computer hasn't crashed ONCE since I got XP! But having two operating systems on one 10 gig hardrive and lots of preinstalled programs such as office has taken its toll and I was warned the other day that my harddisk was nearly full! I deleted all my unnessesary files and managed to get back 1 gig of space but I'm still not happy and would like to get a new 20gig hardrive. It makes more sense to use my recovery disk to return my computer to the way it was when it left the factory and reinstall windows XP on the new harddrive leaving my old operating system on the old C:\ and installing all my programs into the new harddrive. I have two questions about this:

1) Will my computer become dual-boot which i DONT want to happen I want the same setup as I have know but with XP installed on the new harddrive?

2) Will I be able to call my new harddrive B:\ as I don't have a 5 1/2 floppy drive installed and would prefer to have things organised and call it that, if not what will my drive call itself as default as I already have A,C,D,Q,R drive letters already taken?
 

Read other answers
RELEVANCY SCORE 34

hi

i have a western digital 160gb caviar blue hd now i want to buy a new one but some questions are bothering me

first is seagate any better than western digital i ask this because 1tb seagate is just slightly expensive than 500gb western digital so should i go for seagate?

second is that if i buy seagate, will it cause any problem to the system having one wd hd and one seagate?

please answer in details would love to hear anything to increase the knowledge

A:help about a new harddisk?

1. you can mix any makes of disks. They are all 'compatibel'.

2. the make does not matter. They are all the same since they all come from the same factories in Thailand. I have a dozen different makes and do not notice any difference.

3. except Seagate - one of those just died on me. The first and only disk that died in my installations.

Read other 6 answers
RELEVANCY SCORE 34

Hey can anybody tell me which is the best harddisk drive for which i should go??????????I need atleast 250 gb or more of diskspace so suggest me the best HDD with their latest price ????????Thankyou.
 

A:Best HARDDISK

Get Seagate 500GB SATA-II

125bucks.
 

Read other 23 answers
RELEVANCY SCORE 34

I am trying to setup the 3rd Hard Disk in my CPU. It doesn't seems to able detect my already formated hard disk. Is it possible to have 3 Hard Disk in 1 CPU? If so, how do should I go about it? Do I need to do anything with the Jumper on the Hard Disk?
 

A:3 HardDisk in 1 CPU

Read other 7 answers
RELEVANCY SCORE 34

Hi!Where can i buy sata cabel to my ideapad y700 because i have ssd but i cant connect hdd harddisk because i dont know where to buy the cabel. I only have ssd m.2 .  Please help me !

Read other answers
RELEVANCY SCORE 34

Hi which would be the best free hardrive checking tool that would tell me if something is failing or is dead

A:harddisk

http://www.seagate.com/support/downloads/item/seatools-win-master/
http://www.seagate.com/support/downloads/item/seatools-dos-master/

Read other 7 answers
RELEVANCY SCORE 34

My computer came with a 10gig hardrive with Windows Me preinstalled. I upgraded to Windows XP Home Edition and have been very impressed it was well worth the 90 I payed for the upgrade pack! I purchased 64MB of RAM to bring my memory from 64MB to 128MB and my computer hasn't crashed ONCE since I got XP! But having two operating systems on one 10 gig hardrive and lots of preinstalled programs such as office has taken its toll and I was warned the other day that my harddisk was nearly full! I deleted all my unnessesary files and managed to get back 1 gig of space but I'm still not happy and would like to get a new 20gig hardrive. It makes more sense to use my recovery disk to return my computer to the way it was when it left the factory and reinstall windows XP on the new harddrive leaving my old operating system on the old C:\ and installing all my programs into the new harddrive. I have two questions about this:

1) Will my computer become dual-boot which i DONT want to happen I want the same setup as I have know but with XP installed on the new harddrive?

2) Will I be able to call my new harddrive B:\ as I don't have a 5 1/2 floppy drive installed and would prefer to have things organised and call it that, if not what will my drive call itself as default as I already have A,C,D,Q,R drive letters already taken?
 

A:Harddisk!

Read other 12 answers
RELEVANCY SCORE 34

I have an ultraDMA harddisk from compaq. I hope to know what is the ATA and RPM value of my 20GB drive. Is there some software that I can use to check it?
 

A:Harddisk

The only 20 GB HDD I could find on the Compaq site is 20GB Ultra ATA 100 Hard Drive (7200rpm)
251974-B21

This was at http://www.compaq.com/products/desktops/options/options_storage1.html
That doesn't mean that there aren't more. The way to know, for certai8n, is to open your system up, and get the part number, or full specs from off the HDD case itself.
 

Read other 2 answers
RELEVANCY SCORE 34

I have an 80GB IDE Hitachi HD which was formatted NTFS on my computer running Win 7 Ultimate. My problem is that when connected to my computer via external Sharkoon Drive link USB adapter, it is not shown in Windows Explorer but is shown in Device Manager as USB Device and in Computer Management it is shown as ?Disk 1 ? Not initialized? and when clicking on to initialize, an error shows as ?This device not ready?. Same occurred on another PC running Vista Ultimate. Strangely, when connected to IDE inside PC it works perfectly. Can anyone help please?

ASUS P5GC-MX/1333 MB
500GB sata Hitachi HDD
2GB Ram
3.2GB CPU
Windows 7 Ultimate

A:USB Harddisk

Does the USB adaptor work correctly with any other drive?

Read other 4 answers
RELEVANCY SCORE 34

i have an old hdisk on an old pc.
the disk label shows that is 4+ Gigs
when i try to fdisk and format, only half is available
at fdisk options appears to be only 2+Gigs
wtf?
 

A:only 1/2 of harddisk is there!

Read other 6 answers
RELEVANCY SCORE 33.6

hello guys,

got a strange problem with my laptop when ever I turn on my laptop it boots perfect and I am in my windows then the problem starts here it gets too slow and then i cant go inside anything but the laptop is processing ok then i realised it seems like harddisk is making some strange kind of sound like tik tik but its too hard to hear that sound..

Anyways any suggestions or fixes what can i do with it...
 

A:laptop harddisk

Read other 11 answers
RELEVANCY SCORE 33.6

Hi guys, I want to add a second harddrive to my new Elitebook 840 G4 but I'm missing the correct caddy. There is no caddy built in! Where I can find the correct caddy for the harddrive? best regards,Jet Ren Gen

Read other answers
RELEVANCY SCORE 33.6

Hi, sorry this is kind of a long post, please bare with me.

I've got this problem with my harddisk being really slow. Started around the end of june. My mom woke up, turned on my computer, and it wouldn't boot, because it was waay too slow. It would do a split second of accessing every 2 seconds. Decided to do a format. So I did a quick format on C (At the time, I had a C partition for windows, D partition for my own data, and 3 more partitions for slackware). During the windows installation, the harddrive started doing it again. So I did a full format instead, and that worked fine.

Anyway, the computer worked fine for a couple of days, then I went on vacation. Came back now, and it started giving me the same problems again after a day. This time i deleted ALL my partitions and created 2 new ones, C and D. Worked fine again. That was yesterday. You can probably guess what just happened today.

Computer was working fine, till i had to reboot. Same problem. This time though, once the loading screen for windows is finished (after a while) the computer reboots. I tried rewriting the MBR through windows repair console. The first time it said there were errors, but it fixed them up. That didn't seem to fix the problem.

I then decided to check the maxtor website (My HDD is a maxtor 80gb diamondmax 9). Found the tool "powermax", and decided to give it a go. When I tried it out, it said "failed to load dos, press any key to retry". I tried using... Read more

A:Harddisk REALLY slow

I think PowerMax is right approach, its possible the drive is failing.

How did you create the PowerMax floppy? You need to save the file you download to your hard drive then run it to make a bootable floppy. Do not save the file directly to the floppy. Or your floppy drive is toast.

You can also download an ISO CD image of PowerMax and burn the image to CD.
 

Read other 3 answers
RELEVANCY SCORE 33.6

how can i install xp sp3 on my usbharddisk? i can try this but it give error.

A:os installed on usb harddisk

Your computer must be able to boot from a USB port.

This is a very hard thing to accomplish and it probably should not be attempted by an average user.

More information can be found here.
http://www.ngine.de/index.jsp?pageid=4176

-Coolfreak

Read other 2 answers
RELEVANCY SCORE 33.6

Getting Error. 2215-EIT Failure. VA boot record read failure.Ensure drive with VA image is installed correctly. how to solve the issue and its urgent Regards, Yogesh Parate - IT Engineer.

Read other answers
RELEVANCY SCORE 33.6

I have a laptop HDD in an enclosure as an external drive & have had it for about 4 months. It uses usb port. I was using my computer & the hdd was working fine when suddenly as i was downloading something it could not finish dloading because it said the (already written) files could not be detected. Then i disconnected the cable & replugged it & the green light turned on in HDD but it still wasnt detecting it. Then i thought maybe something was wrong or stuck in hdd so i took it out of the enclosure & everything looked fine so i put it back & when i went to plug it in a error showed at lower right of the screen which said that the port hub had a power surge & to disco the hdd & click reset. (Also the green light didnt even turn on this time.) So i did. Then i thought i always used only one end of the usb cable (Double header) so i didnt get why it didnt work but i went ahead & tryed using both heads of the cable & still again said the same thing. I always had enough power so i dont get it. I plugged in my ipod into the usb port & it works good. What should i do?
 

A:HardDisk Problem

Read other 16 answers
RELEVANCY SCORE 33.6

I was using Xp and I installed ubuntu by making partion in my hard disk and suddenly last week one virus (Userinit.exe) hit my XP and Now I can't Login In Xp So I want to Format my Hard Disk (C drive or even Full Hardisk).
I Tried Booting From Xp bootable cd but can't able to boot,so that to check it i inserted Ubuntu Cd i was Booting But Xp cd can't.Currently i am using Ubuntu On same system.
So,help me for booting, Formating My Hard Disk.


Thank You!!!

A:Format HardDisk

with your bootable xp disk when you booted the pc ,,did it ask you to hit any key to boot from CD?

Read other 1 answers
RELEVANCY SCORE 33.6

hi,
i had some problems booting to my xp pro.
the system was unstable. sometimes it booted but then crashed. sometimes didn't even booted.
so i installed my old hd. installed xp on it. & when i tried ti access my problematic hd windows told me the drive should be formated first
why format it? i can boot from it so there is data there...

i want to backup the data there before formating. then i'll install xp on it. (that is why i used my old hd).

thanks
 

A:HardDisk Problems

Read other 6 answers
RELEVANCY SCORE 33.6

Hi Guys,
My comp's been having this very wierd problem lately.

My harddisk shuts down automatically.Everything's fine one moment,then suddenly the orange light on the cpu(which shows hdd activity)goes off and the monitor also shuts down(the green power indicator on it turns to orange). Although the green light on the cpu(indicating power supply)still remains on.Now,in this state, even if i try to press the cpu restart button,nothing happens.I have to cut the power supply from the wall socket and then restart the pc.

Now,this situation happens randomly.It's not overheating probably because it can happen anytime after switching the pc on,10 mins or 2 hours.But another thing is that this issue happens only wen i'm watchin a movie saved on disk or playing a game like Counterstrike etc.I can surf the net or listen to music for hours and nothing happens.Even while watching a movie or gaming,it won't happen always. Sometimes several days go by before anything happens,on other days it happens every 5 mins.
I've opened the cabinet and interchanged the power and data cables between my cd-drive and harddisk,to check whether anything's wrong with the cables.But still da same problem.i've even tried using different players to watch the movies(VLC,Media player Classic),but no use.I observed the cpu usage during movie playing and it hovers around 15-20%.

My pc's config is AMD athlon 2400+ xp,256mb ddr,onboarg graphics suspport,samsung 80gb 72... Read more

A:Help: Harddisk shuts down...

Have you checked your hard drive for bab clusters?
Also what kind of PSU do you have?
 

Read other 3 answers
RELEVANCY SCORE 33.6

Hello, my friend recently formated one of his hdd (the main), he put windows XP on it.. evreything works fine... on the bootup it finds 2 hdd.. so evreything is normal... same thing in the bios... but once he goes on my computer there's only one hdd, only the master.. it looks like that it doesn't find the slave. You guys have some advices?? Please let me know as soon as possibile.

Sincerely
Massimo
 

A:Problem with Harddisk!

Read other 12 answers
RELEVANCY SCORE 33.6

I have windows XP professional on a 40GB harddisk, but I can't get it to boot up! I'm sure it has something to do with the MBR. The computer is an old compaq, with a floppy A: drive that does not work!
I'm totally new to this sort of problem, so I'd be really gratefull for clear instructions on how I can get it up and running again.

For example I found a download for a DOS that I can use via the CD drive. However I haven't a clue as to how I can use it to boot up or fix the MBR, if it is indeed possible!

Grateful for any help, advice or suggestions.
 

A:No boot from my harddisk

Read other 11 answers
RELEVANCY SCORE 33.6

I have an HP A610Y (the specs in my signature are not this pc) and at boot, i get this message: "BOOT DISK FAILURE. INSERT THE SYSTEM DISK AND PRESS ENTER". I am positive that the hard drive is correctly connected and configured. It is a ST38011A (80GB). Any help is very much appreciated.
 

A:Harddisk not detected

Go into the bios and make sure its booting from the hard drive first, also there may be a floppy in the floppy drive have a look there aswell see if there is one in.
 

Read other 2 answers
RELEVANCY SCORE 33.6

I've had many harddisks in my time. I actually think all of them have broken down at some point.
It seems like in resent years they have broken down more and more often.

Most times the harddisks have begun to make clicksounds or spinning randomly down/up and in the end completely break down and/or i send the harddisk back on warranty..

The drives have been ATA and S-ATA 1/2.
The last two disks i sent back were Sata2 and was about half a year ago, and now one of the new ones does the 'spinning randomly down/up'.
It seems like it may be a bad connection. When it begins to click and the computer "stops"(sometimes making a BSOD and sometimes just spins up again and keeps on trucking) i try to wiggle the cables a bit, but it doesn't really seem to do anything...

I've tried before that it was the PSU, where it helped exchanging that, but i don't have another one to try out with...
And i only have two HDD's(a Maxtor and seagate, it's the Maxtor that's crapping out) and the rest in my signature which shouldn't use much power -I measured it to only 150W...
The PSU is about 3 years old..

If it helps, i use Torrent's alot and often copy/move things around on the disks...
I just don't understand how most of my disks only last less than 2 years...
Could it be lack of cooling perhaps? It's usually around 30c in the case, the fans behind the HDD's are turned off though..
 

A:Harddisk's failing.. Again and again..

Read other 16 answers
RELEVANCY SCORE 33.6

Anyone knows how to make the usb harddisk bootable?

As for the bios side, I already set first boot device to usb-hd.

Thanks.
 

A:Booting from usb harddisk.

Although some manufactureres claim USB "bootablity" right ut the box that not usually the case. I searched for answers to your question and it might involve a little more from your side.

For starters make sure you have the latest version of your BIOS.

You might want to then format and partition the drive and make it a bootable drive in that sense. Either through DOS or Windows.

Also, you might want to copy the same bootable files located in a floppy boot disk (make sure the boot files are the same as the OS your using) to your USB hard drive.

If you still need more "oomph" to this answer check out this site. https://www.codidirect.com/shop/thefactsbehindbootability.htm . Keep in mind that although they are mentioning USB Flash devices, the same technically applies to a USB HDD since it is also classified as a "storage device".

Hope this helps!!
 

Read other 3 answers
RELEVANCY SCORE 33.6

My hard disk did not detecting when i connect hard disk to the pc the system will restarts
please anyone can help
 

A:harddisk problem

Remove temporarily the HDD while computer is turned off and unplugged. Does it reboot also?
 

Read other 1 answers
RELEVANCY SCORE 33.6

my harddisk size is 20 GB.i m using only 3 GB of it.BUt it still shows 16.65 GB used whereas I m using only 3 GB. I checked all the contents of my hard drive.It is only 3 GB. I restarted my computer also but still it doesnt show any change.Cleared all the history and deleted all the temporary files but still cudnt get out of this.
 

A:Showing more used harddisk than actually used

Read other 9 answers
RELEVANCY SCORE 33.6

Harddisk Security I have a notebook Lenovo G475 and I was change the hd. When I turn on I read "Sata Port 0 lock" and my notebook don't boot the system. How can I solve it? Help me plz


























1496135121742.jpg ?3589 KB

Read other answers
RELEVANCY SCORE 33.6

Hi.
I have an external harddisk of 1TB recently it became RAW type and i have lot of data in it so I tried TESTDISK but everything goes fine but in the end it happens nothing, it again shows in RAW format and windows ask me to format the disk to use it.

Somebody help me.Thanks in advance
 

A:External HardDisk became RAW

Read other 15 answers
RELEVANCY SCORE 33.6

In my system 40GB normal drive is installed with Windows XP SP1.

Now I am moving to 200GB SATA harddisk. But want to know that there is any way we transfered all the data with OS into the new harddisk so that I dont have to install everything again.

I heard about Ghost software but not clear that they will do this thing properly and Windows XP will detect the new harddisk because if there is any major change in the hardware then it not accept it .

And mostly my harddisk is filled, so how much space these softwares required to make the image.
 

A:ATA to SATA harddisk

The harddrive manufacturer should have a utility program to copy everything from the old HDD to the new one. Check their website.
 

Read other 1 answers
RELEVANCY SCORE 33.6

Hello

I'm trying to install a second hard disk into my 5 year old
Pentium 3 550 MHz. My original disk is 30 Gigs, and I'm trying to add a Maxtor 120 Gig harddisk as the secondary one. I dont have the full details right now because my friend tried the installtion for me. However the gist of the problem is this: Both hard disks are appearing on the bootup screen (the screen that first shows up when one restarts), the Maxtor 120 Gig as the slave, and the original 30 Gig as the master. However its not appearing under My Computer. To my knowledge the jumper settings are fine.

FYI I'm using Windows XP so the hard disk should be plug n play.

Can anyone advise?

Thanks
Dan
 

A:cant install harddisk

Read other 14 answers
RELEVANCY SCORE 33.6

I have recently had a problem with my pc and have lost important data. I was able to recover some by using recovery software. So i decided to buy a external USB HD for backing up my data from now on. Although the USC HD worked on a friends PC with XP it does not work on mine with a Win 98SE OS.
I can see the HD in windows explorer but when i try to access it, it says that the drive is not formatted and asks if i want to format it. But the HD is already formatted. I did it on the friends machine (XP) where we copied some program files that i might need on my own system (winamp3, anti-spy etc.).

Although i tried hard to get the new HD working with the external usb case i could not succeed so i decided to install it in my case as a slave driver. (Yes, i did changed the jumper settings correctly). Now, both in windows system and bios settings the new HD is visible but no drive letter is assigned to it and i can not access it in windows explorer.

Please, help. I am about to loose my mind...

Thanks,
jt.
 

A:Harddisk problem

Read other 8 answers
RELEVANCY SCORE 33.6

Hello Support, i wanted to know how i could replace the harddisk in my laptop. but i cant find the manual. Help is appreciated thanksPeter

A:Replace harddisk

As we have properly understood your issue you want to replace your hard disk in  your laptop for this please follow these steps: Turn the computer off and remove the back panel. Look for any screws securing your drive to the laptop. Lift the old drive up about 30 or 45 degrees and pull it out.In its place, install the SSD and put the back panel on.Nitin singh guleria

Read other 2 answers
RELEVANCY SCORE 33.6

Hello, My laptop's hard disk and I dont even have a recovery disk.I was wondering how can I activate the windows if I do a clean install using a Win 8 image?There no key label on the back of the laptop either.PLease help guys. Thanks.

Read other answers
RELEVANCY SCORE 33.6

Guys, today I install the 200 GB Serial ATA drive in my system, But after formatting it shows total 189 GB, where 11 GB gone. Anyone can tell me, I am also attaching the partition magic screenshot.
 

A:Where the space gone from harddisk

Read other 7 answers
RELEVANCY SCORE 33.6

I have a 210GB Hard drive and apparently i only have 16GB of space left. This didn't look right to me so i went into my Cdrive and checked the size of each folder and added them up on a calculator. Not counting folders that were a few MB or KB the calculator told me i have only used approximately 146GB of space. I ran a defrag and cleanup only a few days ago. So what's going on?

Here are the folders in my C drive:

Program Files = 2GB
Program Files (x86) = 70GB
Windows Folder = 23GB
Users = 44.6GB
SwSetup = 6GB
Temp = 0 bytes
PerfLogs = 0 bytes
Intel = 604KB
inetpub = 188KB
IExp1.tmp = 0 bytes
IExp0.tmp = 0 bytes
Games = 126MB
col1832 = 2.16MB
ATI = 248MB
AMD = 3.87

A:HardDisk Problem

Are you counting hidden and system files?

Read other 9 answers
RELEVANCY SCORE 33.6

I need the harddisk driver to my HP x2 210 G1 detachable tablet. I try to use the SCCM to deploy a new image to my tablet, but I need the driver to the harddisk. I have spoken to a technician at HP Support, and he told me that the harddisk was on the motherboard and that there was no driver available. I find this hard to believe. Can anyone help me to find this driver?

A:Harddisk driver x2 210

I wish I could help with your pxe boot problem. Have you tested that this particular usb adapter works/boot on other PCs? Our tablet is a "system on a chip (SoC)" so the drivers are bundled together as you see on the HP support page. The chipset download contain the emmc driver as well. . Intel does have newer drivers for a few of the devices, you can get these by using something like windows update minitool. I doubt new drivers will fix your issue since it seems to be a pre-OS boot issue.

Read other 1 answers
RELEVANCY SCORE 33.6

Im trying to make one working laptop out of two identical faulty ones. Everything works fine on the one i've built until I decided to re-install the operating system:

I have two working harddrives to choose from:

1. Appears to be completely full. When trying to delete unused programs and files I came across a huge section of the HD I couldnt access (about 5gb of a 10gb hd). It is a folder with a gibberish title ( something like - 45aqensocviopwme32jklda92). The hard drive appears to only have one operating system, so I ruled out it being another.

2. The other hard drive had two operating systems on but both needed removed. I formatted It and re-installed XP. Two minutes off the end on installation I get a blue screen of death mentioning "atapi" or "kernel" (kernal_stack_inpage_error) depending on what mood its in.

Just need one of the two to function
 

A:2 Harddisk problems

On number one, did you try deleting existing partitions, and repartitioning the drive prior to a format/reinstall?

The errors on number 2 referencing ATAPI do appear specific to the drive hardware.

You might be better off in the Hardware forum with this; let me know if you want me to move it. There's not much I can personally offer on this issue.
 

Read other 2 answers
RELEVANCY SCORE 33.6

Hello everyone! Just got a little question.

I'm trying to upgrade my harddrive I currently have 4G and i just purchased a new 15G HD. I used the program HDCOPY to migrate my data and OS to the new HD. Then i noticed that my new HD also copied the size of the old one and i believe that i formatted it first and i believe it was 15GB before i copied the old HD.

What do i need to do? Do i have to use another program? Do you know any? or there's just one thing that I need to do to get my original size back?

Thanks
 

A:Copy Harddisk

Hi NavigatorX
I have never used hd copy but from this site it looks like there are two different modes of copying. One uses a sector by sector exact disk image (which is what you have done.) The other mode does a logical file copy and leaves the partition table alone. I think this is their

site.http://212.223.28.218/default.htm

I use a program called file copy which I run from windows. I think it came from ontract with an IBM drive. You may also want to consider using a program like partition magic. This will get your partition restored back to it's original size and keep the data as is.
 

Read other 1 answers