Over 1 million tech questions and answers.

Flex 5 - pen input reacts like touch input

Q: Flex 5 - pen input reacts like touch input

I've been fiddling with this on and off for months, but I don't know if the problem is with the touchscreen, Windows 10, the drivers, my software, or some combination of those, so none of my troubleshooting has really gotten me anywhere. I bought the Flex 5 and the active pen intending to use the touch screen like a Cintiq monitor, in addition to the Huion graphics tablet I already own, but any pen input just reacts like touch input, making imposible to work comfortably in any painting/animation programs. I also can't figure out a setup that will let me use the active pen and my tablet at the same time; Huion and Wacom drivers don't seem to play nice with each other, so I can't have them both installed at once if I want either of them to be recognized in my software and have pressure sensitivity. I have turned off "tablet mode" in Settings, and in the Control Panel I've disabled "Flicks" and "press-and-hold to right-click". Regardless, using either the active pen or my tablet (which doesn't even interact with the touch screen) will make my computer react like I'm using my finger -- same visual feedback, press-and-hold still right-clicks, dragging with the pen will scroll around the webpage/canvas, etc. Depending on the software I'm using and which drivers are currently installed I can sometimes draw and get pressure sensitivity, but I'll still keep accidentally triggering touch commands with the pen that interrupt my work flow. Even if it's at the cost of touch functionality, I need pen input to work properly. With one of my pens, at the very least, but if it's possible I would like to be able to use both the active pen and my Huion tablet at the same time without having to change my setup.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Flex 5 - pen input reacts like touch input

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 102

Hey all, I've been having this issue for a while in OneNote and Drawboard (because it happens in these 2 applications I believe it's a platform=laptop issue and not applications):1. I put annotations on top of PDF printouts in OneNote and in Drawboard PDF using my pen in tablet-like keyboard position2. Right after that touch input stops working for a while, as if it was not touch-enabled device. After 5-15 secs it comes back to life3. This issue does not reproduce when keyboard is in laptop position Has anyone had a similar issue on the same laptop/other Lenovo laptops?My system is a BestBuy-specific sister version of Yoga 14". Thanks,Danil

Read other answers
RELEVANCY SCORE 86

I upgraded my Flex 3 to Windows 10, and everything seems to work, but I'm getting extremely annoying "freezes" with input. For example, if I move the mouse (touchpad or separate USB mouse) around continuously, it will freeze for a moment once every few seconds. The same thing happens with the keyboard. It doesn't happen at all at the lock or login screen immediately after a reboot, it only starts once I log in. This first happened after doing a Windows 10 Upgrade from 8.1, and then again happened after doing a clean install of Win10. Has anybody seen anything like this before?











Solved!
Go to Solution.

A:Flex 3 15 - Input lag in WIn 10

Typing it out helped, I guess, because I was able to track down the source of the problem. The source of the issue is FMAPP.exe, which is part of the Realtek HD Audio Manager. I can't figure out what FMAPP does, though, so i just renamed the file so it can't be run, and everything is fine. Realtek doesn't even complain about it being missing.

Read other 6 answers
RELEVANCY SCORE 84

I have purchased both the Wacom Bamboo and the Lenovo Active Pen to use with my Flex 5 computer. While pressure sensitivity and input work pretty well, I have a problem with my pen randomly clicking or, when I finish a brush stroke, it swipes a line across the screen. As an artist, this is really frustrating. I've tried it in Paint Tool SAI and Photoshop. Photoshop fairs better, but SAI is my main art program so. . . hm. 

Read other answers
RELEVANCY SCORE 82.4

I am looking for the Adapter Input voltages for Seagate Go Flex Drive 9ZQ2P6-500 3 TB.
I have the drive but it does not show the input voltages. I also have the adapters but I
need to identify them in order to have proper voltages/amps to my external drive.

Anyone have any suggestion where I can find that info.
 

Read other answers
RELEVANCY SCORE 81.6

Really having some wonk issues with these last two Lenovo products I've bought. It's nuts. Latest weird thing that's happening seems to be some sort of unintended input. Occasionally, I've had the focus repeatedly stolen from an input field I was typing in. I have to click on the field several times, only to have it taken away again, like the mouse is clicking elsewhere. (I've been having issues with clicking things accidentally firing double-clicks--maybe my mouse buttons are faulty? Both the X1E I returned and this X1C have done that.) The other strange thing that's happening is that in iTunes, if I pause my music, it will resume itself 5 seconds later, like the play button some keyboards have was pressed. But this keyboard doesn't even have that, as far as I can tell. It feels like my computer is inventing input. It's maddening.  Any clues? My opinion of Lenovo products has sharply dropped these last couple months.

Read other answers
RELEVANCY SCORE 81.2

Hi guysI have brand new Lenovo Yoga 520-14IKB. And from the begging i have no touch there. I have tried everything. Turning on and off Hid drivers. I have upgraded every single driver from lenovo website. And even intel drivers from their website. Installed the brand new version of Win10. Nothing happens still no pen and touch input. Do you have any ideas? 

Read other answers
RELEVANCY SCORE 81.2

Hi,
Sorry for the silly question, but I am really lost with Windows 8. Did a quick search, but nothing came up (Keyword will only result in how to set input in Win8, not the problem presented here).
 
 
Here is the issue.

The short version of the question is how do I move the #@#[email protected]%$#^%$ (display gibberish somehow, boxed in red below) input method above Microsoft Pinyin, while keeping English as my default Display language and Input language.
Longer version here:
I use English and Chinese input, but the default MS Chinese input is "inconvenient", so I installed another input software for Chinese input (the gibberish above, or lets call it method ABCD).
The order I want is English as my default Input method and display, while ABCD as my default Chinese input (when I hit Alt + Shift, should switch from English to ABCD). However, since I can't get ABCD above MS-PinYing, when I Alt+Shift it auto switch to MS-Pinyin, not ABCD (Manually switch from MS to ABCD gets annoying).
In WinXp/Win7 I only need to manually switch to ABCD once, and the system remembers it, but Win8 for some reason automotcally load the language list on every start up =/
Also in WinXp/Win7, I can delete MS-PinYin while keeping ABCD (so I only have English and ABCD), but Win8 doesn't allow me to do that as I must have MS-input or the second line (highlight in green) in language perference doesn't even appear.  
There are some additional points/details.
1 - I must set Chinese as "Language for non-... Read more

A:Language input order issue? (Set Non-MS input as secondary default)

Hello, and welcome to Bleeping Computer.
 
I can't help you with your specific problem but you may want to look here. Hope it helps.
 
Under Chinese Input Methods it says to use the Windows key and space bar to easily switch between language inputs.
 

Read other 2 answers
RELEVANCY SCORE 81.2

  While trying to adjust the resolution I apparently picked a level that Windows hp doesn't like. My monitor now has a box which says input not supported floating around on it and no matter what I try (esc, control-alt-delete, restarting) I can't access my computer at all. PLEASE HELP!
 
 
[Personal Information Removed]
Patrick

A:NO INPUT SUPPORTED--Desktop Computer Stuck On Input Not Supp...

Hi there @145755, I hope you find your Support Forum experience a positive one!  It is a great place to find the help you need, from other users, HP experts, and other support personnel.  I understand that you have changed a setting on your computer and now the display is not working.  I am happy to give you a hand with this. Please post the full product number for your computer. See the following, if you need help with that information.  HP Desktop PCs - How Do I Find My Model Number, Serial Number or Product Number? I would suggest you try to start your computer in Safe mode to load basic screen settings. See this document: HP PCs - Windows Safe Mode (Windows 10, 8). As you are unable to see the display properly at this time you will need to follow the process described for "Entering Safe Mode without access to Startup Settings".  If you are able to get in, then make the needed adjustments to your display settings, then restart your system normally to see if the display will come up properly. If not try a different screen resolution. Please let me know whether that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.

Read other 1 answers
RELEVANCY SCORE 81.2

I have a Dell D610 laptop w/ XP Pro SP2... or had.

I have a corrupted registry entry hosing the keyboard input. The mouse works fine up until the point when I kit the first key on the keyboard when under the Graphical Windows interface. After I hit any key, the mouse freezes as well. This happens if I use the laptop keyboard or an external keyboard connected to a PS2 jack.

I have performed hours of troubleshooting and it is not the keyboard hardware. Keyboard input works during all non-graphical UI (BIOS, Recovery Console, etc.). I even removed the drive and plugged it in to another computer. I made a copy of the WINNT\system32\config files (sam, default, security, system, software) and replaced them w/ a copy of these files from WINNT\repair. The computer boots to Graphical Windows and I am able to type in this session just fine.

How can I "erase" the keyboard driver corruption in the registry (or perhaps a corrupted driver file or set of files)? The problem is that I can't boot the system to a point where I can edit the "corrupted" keyboard entries. I can't use the Recovery Console because I don't have the Administrator password. So I tried to install SP3 from a bootable CD. The minute it asks me to type in the Product Key (a graphical dialog box), input is frozen a the first keystroke (even a key like Caps Lock). Can I actually edit the registry that resides on the boot drive while it is connected to another computer? Any other suggest... Read more

Read other answers
RELEVANCY SCORE 80.4

So my Laptop does accept HDMI as Input to. But i dont know about any program, that can watch what is being put in. Does someone know one?

A:Laptop with HDMI Input, but no program to watch the Input

you can try any of the tuner software and see if that works. things like Windows Media Center, XBMC, MediaPortal, GBPVR.

video editing software like Adobe Premiere. the best, easiest, and cheapest bets would be to try the tuner software first.

Read other 3 answers
RELEVANCY SCORE 80.4

I have an A530 that will not connect when using the PC input, but the HDMI out port works fine.  So I attempted to connect to an external monitor and it worked.  So I know the actual HDD is working and that the computer is running properly. I then took an HDMI cable and ran it from the HDMI out port to the HDMI in port and the screen is now receiving the signal from the PC. So now I know both the PC and the A530 screen are working. The PC is out of warranty. Any idea why this is happening?  I currently have an HDMI cable connecting the in/out ports and the computer works, but I'd like to go back to it just using the pc and have an available HDMI port.  

Read other answers
RELEVANCY SCORE 80.4

getting no signal input and input not supported messages!
i dont know whats wrong with my pc. and i just spent 80 dollars on a power supply 3 weeks ago. i cant afford to take it to geek squad or something to fix it right now.
I have a custom built PC by a guy a met at school. bad choice. anyway i have a windows vista OS but its only a trial account cause this dude ownd me and i didnt notice it was a trial till 30 days after.
32 bit windows vista home premium OS
geforce 9500 gt
Amd Athlon II X2 250 processor 3.01 GHz
4.00 GB ram
asus MB, not sure what kind all i see is asus
only starts in safemode with networking
Aoc moniter or Adc not sure what it says .
my moniter is plugged in to my video card its an off board.
what is causing this?
a few days ago i downloaded my latest video card driver, restarted the pc and it WAS GOOD! back to normal!! after using it and finally being able to listen to music and play games. i restarted it to see how it would work and it went back to the black screen with red writting in the middle " input not supported"

a few days before this happend i got a virus called anti malware GO or something like that. i downloaded iexplore to get rid of it , i deleted the files and it was gone. im sure it had something to do with it.
please help i cant afford to get a windows 7 or vista upgrade for another 2 weeks so how can i fix it now? could my video card be messed up even tho im on the same PC now in safemode with networking?
 

A:pc only load in safemode, no signal input , input not supported

duplicate closed
http://forums.techguy.org/general-security/985255-pc-only-loads-safemode-input.html
 

Read other 1 answers
RELEVANCY SCORE 80.4

Windows automatically updated last night before shutting down. When I turned on the computer this morning, the HP w2207h monitor was not functioning properly. Each time I rebooted, I received the message "HDMI Input: No Input Signal" before the monitor went to sleep.

I do not believe it is a problem with the sleep and display settings as I have dual monitors and the EN9910 is functioning properly; both are set to NEVER anyway. Further, I have plugged our SONY television into the HDMI port and it works just fine.

I have also plugged the monitor into another computer, using the same cable, and both worked just fine. The hp monitor also functions in the utility mode. Problem seems to exist only when Starting Windows.

This has happened once before with a Windows Update, but I don't recall the solution.

Please help.

Thanks.

A:HDMI Input: No Input Signal -- Monitor Going to Sleep

Hello and welcome aspen can you just make sure the driver for that monitor is ok.

Software & Driver Downloads HP w2207h 22 inch LCD Monitor | HP? Support

But mate I also think you may have answered it yourself in another way. Can you remember when this started happening? If so system restore back to before that date.

Then it is just a matter of downloading any updates if this is what is - one or two at a time until you find which one is the culprit. Make a not of that one and each time it comes up untick it to download / install.

Read other 9 answers
RELEVANCY SCORE 80.4

Recently received this laptop as my old one died, but it didn't have a hard drive. Installed a hard drive and Windows 7 64bit on the laptop. Installed all drivers and utilities on HP's driver page. It went from saying No Pen or Touch, to now showing just Pen Input Available under Pen and Touch. Pen does not seem to respond, and for the life of me I cannot find what I'm missing to allow touch. I have no unknown devices in Device Manager. Under HID I have Wacom Virtual Hid Driver, and three "HID compliant device" items listed. Under Keyboard, I just have Standard PS/2. Under Control Panel - Pen and Touch, I have no touch tab.Any ideas?

Read other answers
RELEVANCY SCORE 80.4

NO PEN OR TOUCH INPUT AVAILABLE FOR THIS DISPLAY in HP Pavilion 10 TouchSmart Notebook PC - e008AUi format last weekhow can i fix this? and no HID Complaint TouchScreen Driver 

Read other answers
RELEVANCY SCORE 80.4

I recently got this device with no harddrive. I installed one and booted windows 8.1. It installed just fine and works great for the most part. But the touchscreen is not recognized. I know that being a new harddrive, the computer probably wouldn't recognize it right off the bat without further installation of something. I installed all of the drivers from Lenovo Downloads for the device. Most of them were fine, but using the touchscreen firmware driver gets me nowhere, saying that there is no controller recognized in this system. It also says that this upgrade may not apply to my system.
 
If I have a touchscreen, how can i make a fresh install of Windows 8.1 recognize it?
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
 










Solved!
Go to Solution.

A:P400 - No pen or touch input is available for this...

Solved. Cable from lid was unplugged.

Read other 1 answers
RELEVANCY SCORE 80.4

Hello, I recently bought a HP Envy M7 Smart Touch Energy Saver laptop, after a month of using it I just became so irritated by Windows 10 constantly freezing or apps crashing (due to compatibility).  So I Installed Windows 8.1 In order to maintain the touch screen interface in the laptop, after I installed windows 8.1 I downloaded all of the drivers available for my Laptop, after updating every single aspect, my Windows System Information states "No Pen or Touch Input", I cannot seem to find any touch screen drivers in the HP website and there are some drivers in Device Manager with an exclamation mark as "Unknown Devices", I've enabled view hidden devices and there's no sign of any touch screen driver. I made a component test in UFI to see if there was a faulty with the touch screen and there's not, it's just a driver compatibility issue. Any help? Please and thank you

A:No Pen or TOuch Input is available for this display HELP

Hi @faviodelgado, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community! I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY m7 Notebook and the Touch Screen not working correctly. Hereis a link to help troubleshoot the Touch Screen in Windows 8. Here will show you how to check if your Touch Screen is enabled: Press the Windows logo key + X.Select Device Manager from the list.Click the little arrow next to Human Interface Devices to expand the list. Click the touch screen driver. Right click to confirm that it is enabled. Please let me know how this goes. You can say thanks for trying to help by clicking the Thumbs Up below! Thanks.

Read other 3 answers
RELEVANCY SCORE 79.6

My Lenovo Yoga 720 touch and pen input is not working as it should, when i try to use touch or pen input it reacts top down opposite, by that i mean when i touch the bottom it inputs touch at top of screen and opposite. Started behaving like this after i updated the driver, i believe rolling back the driver would fix it but i can't find a driver to roll back to.

Read other answers
RELEVANCY SCORE 79.6

Touch and pen input are not working on my Yoga460 for sometime. I tried many things but could not find a solution. I am using Windows10. Can anybody guide me on the issue?

Read other answers
RELEVANCY SCORE 79.6

I have purchased Gateway ZX 4800-2 from the Best Buy.
The display item at the store was working perfectly and I was be able to use with my fingers. However, the one I have purchased has problem. On the computer properties, it says "No Pen or Touch Input is available for this Display" I do not think the problem is about hardware. But windows 7 might not accept something. Can anyone help me about this problem. System has wireless mouse and keyboard and only one small received came with system where you plug to the usb slot. System has Windows 7 OS on it.
Also, at the device manager, there is something with yellow mark named TACTION. I could not find driver for this name.
When I try to update and locate Gateway Driver DVD, it says already using updated driver.
But still yellow mark is there. I dont know what kind of driver it is and I even do not know what is TACTION is.
Also, when I go to touch portal, it says "Multitouch hardware is not available on your computer"

Read other answers
RELEVANCY SCORE 79.6

Hi, i have a little problem with the multitouch gestures for the trackpad on my asus notebook. It seems like the program controlling and operating them doesn't start on default when the computer is turned on anymore. I reboot my computer with msconfig in selective mode with all non-microsoft services OFF, but when i start it in normal mode it still doesn't work until i start a certain program which i cAn't remember, i found that via asus.com. I'd like to know how to make it start by default when starting the comp again and also the name of the multitouch program. (i believe it was something like "smartPad")

A:Multi-touch trackpad input

Check Asus Support for a driver update -

http://support.asus.com/ServiceHome.aspx?SLanguage=en

Regards. . .

jcgriff2

`

Read other 6 answers
RELEVANCY SCORE 79.6

Hello, I change the motherboard of the laptop and after that the touch for the screen doesnt wotk anymore.I wenr in the Device manager and unnistall the HID-compliant touch screen, but i cant find the driver to install him back.Also in the PC Info appers "no pen or touch input is available for this display".

Read other answers
RELEVANCY SCORE 79.6

I have purchased Gateway ZX 4800-2 from the Best Buy.
The display item at the store was working perfectly and I was be able to use with my fingers. However, the one I have purchased has problem. On the computer properties, it says "No Pen or Touch Input is available for this Display" I do not think the problem is about hardware. But windows 7 might not accept something. Can anyone help me about this problem. System has wireless mouse and keyboard and only one small received came with system where you plug to the usb slot. System has Windows 7 OS on it.
Also, at the device manager, there is something with yellow mark named TACTION. I could not find driver for this name. I dont know what kind of driver it is and I even do not know what is TACTION is.

A:"No Pen or Touch Input is available for this Display

  
Quote: Originally Posted by reachist


I have purchased Gateway ZX 4800-2 from the Best Buy.
The display item at the store was working perfectly and I was be able to use with my fingers. However, the one I have purchased has problem. On the computer properties, it says "No Pen or Touch Input is available for this Display" I do not think the problem is about hardware. But windows 7 might not accept something. Can anyone help me about this problem. System has wireless mouse and keyboard and only one small received came with system where you plug to the usb slot. System has Windows 7 OS on it.
Also, at the device manager, there is something with yellow mark named TACTION. I could not find driver for this name. I dont know what kind of driver it is and I even do not know what is TACTION is.







Hi Reachist! Welcome to SevenForums! Try right-clicking on TACTION and going to properties. Then to the Details Tab and from the drop-down menu choose Hardware IDs. There'll probably be two. Post them back and I'll try and help.

Thanks,
ZeshanA

Read other 5 answers
RELEVANCY SCORE 79.6

I just buy Dell Latitude Rugged 7202 and touch is not working in either laptop mode or tablet mode, under Setting and PC info getting  "No Pen or touch input is available for this display" 

OS: WINDOWS 10

Please Help Me

A:Dell Latitude Rugged 7202 touch not working - "No Pen or touch input is available for this display"

Hi ttthai2902,
Thank you for writing to Dell Community Forum.
Please check the link for the troubleshooting steps that you can try:
http://dell.to/2olytdD
Please click my DELL-username and send me a Private Message with the Dell Service Tag number and your email address.
Note: please don't mention the service tag or email id on the public forum as it contains your personal information

Read other 1 answers
RELEVANCY SCORE 79.2

HI,

Has any one modified a Power Suply to Take 12 volt DC Input?

I would very much like to hear from you, or any one you may of heard of that has done this.

I wanted to Put a desktop case etc. in my car and use it to listen to music...

Thanks to anyone who replies...
 

A:DC Input Power Supply (12 volt input)

A standard Computer PSU rectifies the incoming mains (120 or 240 volt) and the "chops" it in a switchmode type power conversion.

Therefore as it starts with a high DC voltage (120 or 240 V AC rectified to DC) there is no easy conversion to make it use 12 V instead. Without a complete rebuild and redesign of the PSU.

By far the cheapest and easiest way is to use an off-the-shelf 12 V inverter that converts 12V to 120 or 240 V AC, and then you dont need to bother rebuilding the power supply from scratch.

Has the advantage of easily sourced power supply units for the PC. You would likely get away with a small 200 Watt unit.
 

Read other 2 answers
RELEVANCY SCORE 79.2

ALC 888 codec
Latest driver 2.46 installed
F7 bios installed

Sony Bravia LCD,

If I'm using the PC input on LCD, sound works great.
If I'm using an HDTV input on LCD, no sound.
Anybody got any ideas about this?
Would really like to use an HDTV input, picture definition is so much better in 1080i.

TY

A:Realtek HD Audio, PC input yes/ HDTV input no

If you have an HDMI OUTPUT on your PC, on many you have to manually set the HDMI on the Video card as the default playback device, rather than the usual "speakers". Go to the Control Panel/Hardware and Sound/Sound Panel and on the Playback you will probably have an icon for the HDMI, select that as the default playback device and you should get the PC audio in the HDMI signal.

Read other 1 answers
RELEVANCY SCORE 79.2

I have an HP Pavilion A6421.uk computer with an HP w2007v monitor. (The OS is Windows Vista).I've been getting the message "VGA Input - No Input Signal" and the monitor appears to be in sleep mode permanently. I've checked all the connections, cables etc and I have also connected the monitor to an old computer, where it worked fine. I'm guessing I need a new graphics card but don't know how to go about changing it. I have
opened up the box and cleaned it all out, but am not sure what to do now.

Could I take out the graphics card from the old computer and put it in the new one? The old computer is a Dell Dimension 5000 (Windows XP).
Or would it be an option to swap hard drives? (I urgently need to access my work but the old computer got a virus and doesn't work properly).I don't know the first thing about hardware really, so wondered what any of you would recommend I do:
1. Just buy a new graphics card and replace the old one - in which case, what would I buy?
2. Put the graphics card from the old machine into the new one. How do I do this and does anyone have any diagrams?
3. Swap the hard drives so that I use the old box with the new monitor. (this is probably a stupid idea, but who knows).

Please help!!
 

A:VGA Input - No Input Signal - New Graphics Card?

Read other 7 answers
RELEVANCY SCORE 78.8

I have a ACER Z5600 that I purchased used. Someone had put Windows 8 on it after changing the hard drive and the touch screen would not function. After trying multiple fixes I re-installed Windows 7 Ultimate and I have the same issue. I installed the ideaCom touch driver (could not find the touch driver at ACER web site so used driver max) Same issue. Control panel had a exclamation mark over the hardware.) I ran all Windows updates and now the touch screen has diapered from device manager. At every point through this situation system information said "No Pen or Touch input is available for this Display. Any help short of dynamite would be greatly appreciated. Thanks in advance!
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5400 @ 2.70GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3004 Mb
Graphics Card: Intel(R) G45/G43 Express Chipset, 1310 Mb
Hard Drives: C: Total - 75940 MB, Free - 38924 MB; F: Total - 349 MB, Free - 89 MB;
Motherboard: Acer, Aspire Z5600
Antivirus: None
 

Read other answers
RELEVANCY SCORE 78.8

It appears that my touch and pen input failed today. When it first happened I was drawing in Autodesk Sketchbook, the window deselected suddenly and pen input stopped working. I was without internet at the time.  I thought maybe it was a problem with the pen, at the time I was using Lenovo Pen 2, so I tried the bulit in pen, but still nothing. I then noticed that touch wasn't working either. I checked device manager for any issues, but didn't find any, so I restarted. After restarting I found Unknown USB Device (Device Descriptor Request Failed) in my device manager. From there I tried the standard uninstall device and scan for hardware changes, and windows hardware troubbleshooter to no effect.That worried me, but I was hopeful. After some googling later on I came across: https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Yoga-Wacom-driver-7-3-4-25-seems-to-be-bro... It suggests installing some drivers directly from Wacom, but I am unable to install these drivers as the do not find a valid device to install for. I also attemped to install the firmware update for Touch Input on the X1 Yoga 3rd gen support page, but it fails with the same error. I then did a hard shutdown with shutdown /s, still the same unknown device.Updated bios to the latest version, still the same unknown device.Uninstall the root USB hub controller, device went away, but when scanning for new devices it comes right back in the same state.I also looked for any way to g... Read more

Read other answers
RELEVANCY SCORE 78.8

In Windows 7, we can disable touch ( or tablet input ) by :
sc stop tabletinputservice
However, in Windows 8, touch still works after stopping the tablet input service.
Does anyone know how to comletely disable touch in Windows 8 ?
Thank you

A:How to disable touch ( tablet input ) in Windows 8 ?

Hi,
You can disable your Touch device in Device Manger to achieve your purpose.
Juke Chou
TechNet Community Support

Read other 3 answers
RELEVANCY SCORE 78

I have an Acer Aspire M computer with a touch screen that runs Windows 8.1. I was having issues with the touch screen, so I went to download the drivers from the Acer website. However, when I restarted my computer to complete the installation, it wouldn't allow me to use either the mouse, touch screen, or keyboard.
Normally, after loading, a personalized picture will appear on the screen, displaying the time, connectibility, and strength of the network. The user is then supposed to swipe up, click on, or press space to move the picture, at which point the login screen appears. My computer loads normally when starting, but won't allow me to use the mouse, touch screen, or keyboard to move the picture out of the way, so I cannot access the login screen.
I have already contacted the Acer company support and attempted to use the battery reset pinhole, but to no avail. Is there anything I can do, besides a factory reset or using it as a cat bed?

A:No touch, mouse, or keyboard input after computer reset

using it as a cat bed



Probably best.

You could uninstall those drivers, looks like you will need to do it from outside windows.

You would need a decent winpe., which you probably don't have, nigh on impossible to make one given your situation.

System restore to just before the problem may do the job.

Try that and see.

Read other 2 answers
RELEVANCY SCORE 78

Hello. My problem can be seen here. Ignore my commentary.https://www.youtube.com/watch?v=J7la_0KObbc I have an issue with my touchscreen consistently, frequently, taking anywhere from 2-15 (!) taps to regonize input. Once it does, it latches on immediately and functions until I begin using the KB/Mouse for some time. If I drag my finger, it recognizes it immediately, but it can sometimes take 1-5 inches of movement before it starts to recognize input. Suggestions welcomed. I'm willing to try anything at this point, including replacing the whole display assembly. I have tried:Windows touch calibrationDisabling Wacom flicksClearing any calibrationsBrand new OS installThis issue is somewhat/slightly present in OS installers - a la, before Windows 10 loads...Disabling USB Power Management on the USB Touchscreen as well as the Wacom device.Disabled USP Selective Suspend in power options.Updated to latest BIOS (Date September of 2016)

Read other answers
RELEVANCY SCORE 78

Hi, I've got a problem when using my Thinkpad Yoga S1 2-in-1, in tablet mode. I cannot find a way to put it into the standby mode when it is in tablet mode, to let me simply carry it grabing the screen, because as soon as I touch the screen it goes on, and the it is very annoying. Everytime, when I am moving from one place to another I have to turn the keyboard around, rather than simply put it into the standby mode by turning off the screen, like I do with my tablets or phones. Till now I fought that setting the power button to turn on and off the screen should act like the standby mode, but when I hit the power button and the screen goes off, it still turns on by touching it. I am not interested in putting the laptop into the sleep mode, as I am using it to different situations and it is to slow to wake up a machine from it. I would be suprised if there would not be any way to enable the standby mode in my TPY like it works with other tablets/phones. 



Thinkpad Yoga S1, i7 - Win10, Lenovo A730, i7 - Win10, Lenovo Ideapad Y570, i7 - Win7

Read other answers
RELEVANCY SCORE 78

so i keep having to (re)start the service. (note: the problem only occurs after i had stopped the service one time before)

so is there any way to make it stay up, and not keep having to restart it? yes i have tried setting it to Automatic, and Automatic (delayed start)... all the Recovery options (in case the service fails) are set to "Restart the Service" (reset fail count after 1 day), (restart service after 1 minute) i checked for dependencies, and couldn't see any.

any idears? running a Gateway ZX6800

~~~~~~~~~~~~~~~~~~~~
Windows 7 Ultimate
Processor = Intel Core2 Quad CPU Q8200 @ 2.33GHz 2.33GHz
Installed memory (RAM) = 8.00 GB
System type = 64-bit Operating System
Pen and Touch = Touch Input Available with 2 Touch Points
~~~~~~~~~~~~~~~~~~~~
 

A:Tablet PC Input Service keeps stopping. (it disables touch)

now not only does it disable touch, but it disables the gestures as well. so no dragging with your finger on web pages...
 

Read other 1 answers
RELEVANCY SCORE 78

I have a brand-new ThinkPad T560 (20FH002DUS) that is experiencing ghost input with the touch screen. I've left the laptop sitting next to me and occaisionally it will light up with random inputs all along the bottom left corner of the monitor. The driver pack I used for imaging is the latest one found here: https://support.lenovo.com/us/en/olddownloads/ds112139I've also updated the BIOS. 

Read other answers
RELEVANCY SCORE 78

i have a 2 week old tm2t (2100) laptop and its touch input is completely dead..i reinstalled os..updated biosupdated graphics driversupdated wacom drivers after doing all these things also its not working.. can some one pls help me....













Solved!

View Solution.

A:tm2t touch screen and pen input completely dead

  here are the pics i took wen i opened my laptopas mentioned 2 screws are below the rubberand the third screw is as shown in the pic belowi have removed the 3rd screw in the pic there will be 4 screws which hold the LCD screeni have removed the screws and taken a pic.... unscrew them and slowly lift the LCD screen.here is a close up of the connecting wire....HP knows that this kind of connector gives problem, they had put a tape on this connector..i removed the tape, pushed the wire to the connector and put the same tape which was previously present..boot the system and done,,, perfectly working touch screen

Read other 10 answers
RELEVANCY SCORE 78

I have a lenovo y50 touchscreen and the touchscreen inpuy is inverted on the x axis.Here is a picture of me touching the screen on the right side, however the touch is detected on the left side:     This happened a year ago when I was installing the Dolphin Emulator to emulate gamecube games. The touch screen has been messed up ever since.I have a windows 10 home 64 bit.Things I've tried:1.Reinstalling OS (I even ordered an SSD to replace the Hybrid drive the lenovo originally came + installed a fresh new copy of windows)2. BIOS Update BIOS Update for Windows 7 (32-bit, 64-bit), Windows 8 (64-bit), Windows 8.1 (64-bit), Windows 10 (64-bit) - Notebook 3. Reset BIOS to default  (Pressing F9 on BIOS Screen and saving)4. Install Nvidia VGA Driver for Windows 10 (64-bit) - Notebook5. Install Intel VGA Driver for Windows 10 (64-bit) - Notebook 6.Install Intel Chipset Driver for Windows 10 (64-bit) - Lenovo Y50-70, Y50-70 Touch, Y70-70 Touch7. Uninstall HID compliant drivers and restart computer  Did anyone experience this problem before? I need help! I believe my warranty ran out on my laptop since I bought it two years ago. -Hanh Kieu   

Read other answers
RELEVANCY SCORE 77.2

Got my Spectre X360 15.6 2017 edition few days ago and immediately notice this very annoying issue. In short, the touch function is disabled for about 2 seconds after using the pen, which means everytime when you finish writing something with the pen, you have to wait for about 2 seconds before the touch screen responds to your finger input.  This is really annoying, it slows down my workflow dramatically. And I have never experienced this kind of issue before on any other devices using NTrig digitizer, and I have used a lot NTrig devices (Fujistu 550, HTC Flyer, Sony Vaio Duos, Vaio Flips, Microsoft Surfaces). But I did noticed similar issues on some Wacom AES devices like the Thinkpad Yoga 14. I do remember HP mentioned somewhere that the pen uses Universal Windows Pen protocol, Is this part of the new protocol? Anyway, please please please, HP! Fix this problem and release a firmware update ASAP, I really like the Spectre X360, You guys did a good job in general, but this is a deal breaker, I would hate to send it back.

Read other answers
RELEVANCY SCORE 77.2

Hey to everyone. I have a question since lenovo seems to lack on a informations when it comes to this. I bought a used X220 and cant identify if it should be multitouch or pen input only model. Screen part number is (according to lenovo page):04W3462Model Number is 42962WUTouchscreen with finger doesnt work ( if it has any).I dont have a pen (stylus) currently since it was not provided with laptop BUT:Windows in properties says : No pen or touch input is available for this display .Reinstalled windows freshly twice along with drivers (once manually downloaded , second time used Lenovo System update)Still says the same, and there is no tablet or pen and touch settings in control panel.In some other topics , someone suggested to similar problem as a solution installing wacom pen drivers, lenovo digitizer drivers etc.Tried provided drivers , and with every driver throws the same error : a supported tablet was not found on the systemMaybe it has to detect pen near the laptop and it should be fine?Did I just got ripped off?Thanks a bunch!










Solved!
Go to Solution.

A:X220 Tablet Screen type identify ( and touch input...

Ok, so the lcd is definitely multitouch , which is now a reason to concern .Basically , windows recognize it as a laptop, no hid touch input devices in device manager whatsoever.Is this a common issue? Tryed unpluging and plugging back in LCD micro cables but nothing.

Read other 5 answers
RELEVANCY SCORE 77.2

HiI am getting very frustrated with this problem and I would love it if someone were to help me out. I prefer to use my touchpad by clicking with my thumb and then dragging with my index finger. However, the bottom of the touchpad still has touch input so when I want to click and drag, it doesn't always work or the mouse doesn't move smoothly. This is because the touchpad thinks I want to move the mouse with my thumb, and doesn't read the input from my index finger. In order to solve this, I would like to find a way to disable the touchpad in only the bottom (i.e. create a deadzone), so that it only reads clicking inputs, and not touch input. If anyone knows how to do this please tell me! Thank you!

Read other answers
RELEVANCY SCORE 76.4

Hello!
 
I have a fairly serious issue on my hands.
 
2 days ago, my computer decided to stop taking input from anything (mouse, keyboard, and touch). I am unable to do anything past the Windows splash screen. Going into the BIOS shows that the computer is working normally, and my mouse, keyboard and touch screen work there without issues. I really hope I can get this thing working again, as I haven't backed up files to a cloud. Please help ASAP as I need my PC running!
 
Specs:
 
2012 ASUS Mobo
Intel i3-3200
 
Other things:
 
Video: https://m.youtube.com/watch?v=WHzULBD1328
BIOS Screenshot: http://m.imgur.com/a/OJNYe
 
Any help is appreciated!

A:ASUS PC Takes NO User Input (Keyboard, Mouse, and Touch disabled?)

When it crashes, does it respond to CD-ROM button or power button? Also, does a reboot fix it?
 
Last, what model computer is it exactly? Looks like a all-in-one.

Read other 3 answers
RELEVANCY SCORE 76

What can be done with USB Cable regarding PC? Is it worth it?

I use a Dual monitor cabe, one end plugs into The Display shared Vga Connection. The other 2 allow me to have up to a total of 3 Displays. Is there products that allow more than the standard 2 outputs? Example 4?
Thank you

A:USB CABLE, Monitor Input, PC input?

Originally Posted by mmdlshooter


What can be done with USB Cable regarding PC? Is it worth it?

I use a Dual monitor cabe, one end plugs into The Display shared Vga Connection. The other 2 allow me to have up to a total of 3 Displays. Is there products that allow more than the standard 2 outputs? Example 4?
Thank you



USB, even USB3 was never meant for transferring large amount of data needed for HD video, too much conversion has to be made. Laptops are limited by number and type of outputs but desktops can accommodate multiple video cards and even basic cards with Display port that use power of existing GPUs to provide video signal to more monitors or TVs.

Read other 2 answers
RELEVANCY SCORE 76

Dim piesky As Double

On Error GoTo Cancelled - On Error resume next
piesky = InputBox("amount to find", , 196.96)
onerror goto 0
If IsError(piesky) Then Exit Sub Else MsgBox 77
If IsNumeric(piesky) Then v = 1 Else Exit Sub
If piesky = "false" Then Exit Sub
If piesky = "" Then Exit Sub
If piesky = 0 Then Exit Sub

piesky is used to find row number

In blue is the code I tried. Nothing seems to work and if cancelled or blank entry gives an error

Why am I diming the input as Double? Cause nothing else works to find a $196.96 amount in a column
with my program except the double. Column is formatted to accountancy.
 

A:input box error when using double as input

Okay guys, found a solution, the best I could with my limited knowledge.

dim wonky as double
userinput=inputbox (" xxxxxxx")
if userinput="" then exit sub
wonky=userinput

this then finds sums in a col like 99.99 which if the input is normal or currency or whatever
does not work in my program. Perhaps there is another dim function that can be used
that does not require all the above
 

Read other 1 answers
RELEVANCY SCORE 75.6

My X1 Yoga touch screen stopped working after BIOS(V1.40), Touch firmware(V4.20) update. My Win 10 is still at ver 1803.I downgraded BIOS. But that doesn't help. Can't find a way to downgrade touch [email protected], any solution? Obviously, I am not the only victim. It is ridiculous that your recommended update will cause such trouble.In other thread, someone mentioned to replace screen. Really? The new update caused hardware damage?

Read other answers