Over 1 million tech questions and answers.

DHCPMGMT.MSC in Remote Server Administration Tools (RSAT) won't remember DHCP server

Q: DHCPMGMT.MSC in Remote Server Administration Tools (RSAT) won't remember DHCP server

I'm running Remote Server Administration Tools (RSAT) on Windows 7 Professional 64-bit and I've noticed that when I run the DHCP Management tool (DHCPMGMT.MSC) and I add our DHCP Authorised server then close the console, it forgets the DHCP server and I
have to re-select it next time I use the console.
On the other hand, the DNS console remembers that I've used a particular DNS server even after I close the console.
Wondering why the DHCP Management console is so forgetful?

RELEVANCY SCORE 200
Preferred Solution: DHCPMGMT.MSC in Remote Server Administration Tools (RSAT) won't remember DHCP server

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: DHCPMGMT.MSC in Remote Server Administration Tools (RSAT) won't remember DHCP server

Hi,
This is by design.

Read other 10 answers
RELEVANCY SCORE 167.6

Searching for RSAT didn't give any hits so I want to post that RSAT for Windows 7 is available; link via the Ask the Directory Services Team Blog.

Ask the Directory Services Team : Remote Server Administration Tools (RSAT) Available For Windows 7 Beta

Download details: Remote Server Administration Tools for Windows 7

A:Remote Server Administration Tools - RSAT

Nice, thanks for posting!

Read other 5 answers
RELEVANCY SCORE 165.6

I have an install and uninstall process for RSAT - platform is W7 64-bit.
The install process works fine - the uninstall process will not remove Remote Server Administration Tools -
Here is the process
C:\Windows\System32\dism.exe /online /quiet /disable-feature /featurename:RemoteServerAdministrationTools-Roles
C:\Windows\System32\dism.exe /online /quiet /disable-feature /featurename:RemoteServerAdministrationTools-Roles-CertificateServices
C:\Windows\System32\dism.exe /online /quiet /disable-feature /featurename:RemoteServerAdministrationTools-Roles-CertificateServices-CA
C:\Windows\System32\dism.exe /online /quiet /disable-feature /featurename:RemoteServerAdministrationTools-Roles-CertificateServices-OnlineResponder
C:\Windows\System32\dism.exe /online /quiet /disable-feature /featurename:RemoteServerAdministrationTools-Roles-AD
C:\Windows\System32\dism.exe /online /quiet /disable-feature /featurename:RemoteServerAdministrationTools-Roles-AD-DS
C:\Windows\System32\dism.exe /online /quiet /disable-feature /featurename:RemoteServerAdministrationTools-Roles-AD-DS-SnapIns
C:\Windows\System32\dism.exe /online /quiet /disable-feature /featurename:RemoteServerAdministrationTools-Roles-AD-Powershell
C:\Windows\System32\dism.exe /online /quiet /disable-feature /featurename:RemoteServerAdministrationTools-Roles-AD-DS-AdministrativeCenter
C:\Windows\System32\dism.exe /online /quiet /disable-feature /featurename:RemoteServerAdministrationTools-Roles-AD-DS-NIS
C:\Windows\S... Read more

A:Uninstall RSAT - Remote Server Administration Tools

You can use WUSA in Windows 7 to remove updates:
wusa.exe /uninstall /kb:958830
Have you tried this?

André"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/

Read other 13 answers
RELEVANCY SCORE 124.4

Trying to install "Remote Server Administration Tools for Windows® 7" from file Windows6.1-KB958830-x64-RefreshPkg.msu.  

I get this error "Installer encountered and error  0xc8000222".  

Any suggestions?

Read other answers
RELEVANCY SCORE 122.8

Hi there,

I have installed "Remote Server Administration Tools" on my Win 7, 64 bit machine so that I can monitor our server from my workstation. But I am unable to enable the server. If I click on "Remote Server Administrator Tools" (under Windows Features) and click OK, I get this message "An error has occurred. Not all of the features were successfully changed".
Do you know what could be the problem? No luck with googling...

Many thanks,
Jenish

Read other answers
RELEVANCY SCORE 122.8

Hi all,

I am struggling to install 'Remote Server Administration Tools' on my Win 7, 64 bit Enterprise version.
I have managed to install KB958830 and when I try to enable 'RSAT' from 'Control Panel\Turn Windows features on or off' I get a message 'An error has occurred. Not all of the features were successfully changed'.
So, I decided to uninstall KB958830 (RSAT) from the windows update but I get the message 'An error has occurred. Not all of the updates were successfully uninstalled'. It doesn't give me any clue where the problem is! Any help would be much appreciated!

Thanks,
Jenish
Ox

A:Unable to install 'Remote Server Administration Tools'

Are you running in a mixed mode environment? And is this what you installed?
Download details: Remote Server Administration Tools for Windows 7

Read other 7 answers
RELEVANCY SCORE 122.8

Have tried many times unsuccessfully to install x86fre_GRMRSAT_MSU.  Installer just hangs and eventually says the following item(s) was not installed:  KB958830.  Have searched for solution and tried the following:-Running "system scan" from the command prompt (no errors reported)-Running System Update readiness which finds 4 errors (all related to this install) - unavailable repair files for 2 .mum and 2 .cat files the install placed in servicing\packages\After this last, thought I would "remove" those files and try the download again using a different installer but I can't figure out how to do this in W7 as it keeps telling me I need system permission to move the files even though I am an administrator on the machine.  There is no way to "uninstall" the package as it is not listed in installed updates since it was never really installed.Event Log error: 
Windows update "Update for Windows (KB958830)" could not be installed because of error 2148204800 "No signature was present in the subject." (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\ann d lutter\Desktop\x86fre_GRMRSAT_MSU.msu" ")
I am working on a VM session but don't understand why that would be a problem?I would like to be able to work with the "new and improved" group policy options that are not available in the XP utility and also to begin to learn W7.Can anyone help?Thanks in advance

A:Unable to install Remote Server Administration Tools

Hi Andi,
 
It is true that RemoteServerAdministrationTools package is not installed on your computer whereas there is corrupted files recorded in the Manifests and Catalogs folder. At this time, please try the following steps to resolve the issue.  Step 1: Backup registry keys
=========================
1. Click ?Start? -> Under ?Start Search?  -> Type ?Regedit? and press Enter
2. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages
3. Right click on Packages and select export
4. Save to a file on the desktop.
 
NOTE: We can manually restore the registry folder by double clicking it.
 
Step 2: Change the owner of the Registry folder
==========================================
Please navigate to the same registry folder.
 
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages
 
1. Please right click on the Package and select ?permissions??
2. Please check if "Administrators" is listed in the "Group and User" name list. If not, please click the "Add" button and type "Administrators" in the open window and click "OK" to add this group.
3. Highlight "Administrators" and check on "Full Control" under "Accept".
 
Note: If the Access Denied error appears, please click on OK and go ahead with the following steps.
 
4. Click the "Advanced" button and choose the "O... Read more

Read other 11 answers
RELEVANCY SCORE 120.4

Hi everyone,
Got error msg (Installer encountered and error: 0x80070003) when trying to install Remote server administration tools for windows 7. Any idea?
Many thanks!

info:
win7 pro 64bit sp1
admin access
package from: KB958830

A:Error when trying to install Remote Server Administration Tools for Windows 7 (0x80070003)

error: 0x80070003. The system cannot find the path specified.
Are you running the installation from a network share ? Try it locally.Benoit Lecours | Blog: System Center Dudes

Read other 2 answers
RELEVANCY SCORE 120.4

Hi, I am trying to download Remote Server Administration Tools for Windows 8.1, however, the download site is very slow to load, and the download times out. 
The link to Remote Server Administration Tools for Windows 8.1 is.
https://www.microsoft.com/en-us/download/details.aspx?id=39296
Is it slow for other people as well?
Regards,
Andreas
 

Read other answers
RELEVANCY SCORE 118

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise 

Standalone installer available here
http://www.microsoft.com/en-us/download/details.aspx?id=28972
fails with error code 0x80004005


Is this because my installation has issues, or would the admin pack files be updated for RTM?

Thank you in advance for any insight

A:Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

Found the solution here:

http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
Workaround:

Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972Extract the .msu file with a tool such as 7-Zip.Open an Admin command prompt and change directory to where you extracted the .msu.Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xmlWait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.Use the tools as per usual.

Read other 11 answers
RELEVANCY SCORE 98.8

Hiya

The Windows .NET Server 2003 Administration Tools Pack (adminpak.msi) provides server management tools that allow administrators to remotely manage Windows 2000 Servers & Windows .NET Server 2003 family servers. This is the RC2 version (build 3718) of the adminpak.msi file.

The adminpak allows administrators to install the Windows .NET Server 2003 management tools onto a Windows XP Professional or Windows .NET Server 2003 family machines to perform remote server management functions. This is the RC2 version (build 3718) of the adminpak.msi file. Please uninstall all previous versions of adminpak (Beta 3, RC1) before installing this final beta version. Please read PSS Knowledge Base article 304718 for more information on the beta release process for this file and all known issues. Requires Windows XP SP1 or Windows XP QFE 313933 to install onto a Windows XP machine build 2600 (RTM build). See the Microsoft download site to install this QFE hotfix.
System Requirements
Supported Operating Systems: Windows .NET Server, Windows XP

30 MB of free disk space
Windows XP 2600 with QFE q313933
Windows XP SP1
Windows .NET Server 2003 RC2 (3718)
http://www.microsoft.com/downloads/...1f-28ea-4ba6-919b-95a8d757eff9&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 95.6

I am trying to install Active Directory on a desktop computer with Windows 7 64bit operating system. I clicked on a link taking me to Remote Server Administration Tool for Windows 7. I started the download but it seems to be hung up on Windows Update
Standalone Installer. It says, "Searching for updates on this computer." It stayed on the same thing for hours last night and never moved past it. I decided to try again tonight and again it has been hours with the same message. What do I need to
do? Please help.

Read other answers
RELEVANCY SCORE 90.4

I manage AD and 30+ servers at a community college. I just got a new computer for my office and loaded Windows 7. I also loaded the Remote Server Admin Tools so that I may manage my servers. The old Windows XP Admin Tools had a tool called IP Address Management. This tool combined DNS, DHCP, and WINS management all in the same window and the DHCP would keep the server setups on exit. I can't find this tool in the RS Admin Tools for Windows 7. Does anyone know where I can get a tool like this for Windows 7?

Thanks,
Judy

A:Remote Server Admin Tools and IP mgt

I've heard good things about RackTables... I think it's the sort of thing you're looking for...

RackTables

Read other 4 answers
RELEVANCY SCORE 86

IP Network: Dhcp server works fine. (CISCO ROUTER)

Windows 200o servers, Windows 2000 clients (up to dated, sp4, rollup1 etc) IS6sp1

Some pc's with IP dhcp , works ok
Some pc's with fixed IP, works ok

After changing fixed IP on a client to dhcp-IP, the client can not find the DHCP server.
change back to fixed IP, PC works fine again.

DHP server and other DHCP clients still working fine

Local Area connection status: only outgoing packets, no incoming.

reboot, or ipconfig /renew no solutions

Does someone know this problem ?
Pieter
 

Read other answers
RELEVANCY SCORE 84.4

my friend and myself want to experiment with Back orifice 2000 - purely for fun and experimental purposes. I went through the documentation that came along with it and have a fundamental doubt...

Both of us live near each other and we use dial-up access through an Internet Service Provider to connect to the net. We are assigned different IP addresses every time we connect to the net. In such a case, how will the Back Orifice client program be able to loacte the server without getting the IP address from my friend? Are these programs designed to work only in LANs where the IP address remains constant? Awaiting your reply...
 

A:using remote administration tools (back office)

Read other 6 answers
RELEVANCY SCORE 83.2

I'm messing around with W2K Server at home and can't seem to get it connected through my cable modem to my ISP's DHCP server. I know the cable and connection are good because it works on my W2K Pro workstation. I've tried ipconfig /renew but that's when the error occurs that it can't find DHCP. I can successfully ping the loopback address. The NIC is set to use DHCP.

Since I'm just becoming familiar with Server I'm sure there's something I'm not configuring properly. Suggestions?

Thanks.
Kevin
 

A:W2K Server can't find external to DHCP server

Read other 6 answers
RELEVANCY SCORE 83.2

Cannot access windows updates, any admin tools, av websites., cannot run spybot, internet explorer giving security settings warning, cannot change any of the settings.

HJT log file:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:08:50 PM, on 6/15/2011
Platform: Windows 2003 SP2 (WinNT 5.02.3790)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\Documents and Settings\administrator.#domain#\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Trend Micro\AMSP\coreServiceShell.exe
C:\Program Files\Trend Micro\UniClient\UiFrmWrk\uiWatchDog.exe
C:\Program Files\Trend Micro\AMSP\coreFrameworkHost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Trend Micro\Client Server Security Agent\tmlisten.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\rdpclip.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Broadc... Read more

A:Server 2003 Terminal Server cannot access admin tools

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you... Read more

Read other 2 answers
RELEVANCY SCORE 80.4

I was trying to use tftp32d to pxe boot machines however, I couldn't get the DHCP server that is built into that program to work and eventually got angry and gave up. When I had some more patience, I started trying it again and it worked immediately without any settings changed.

The reason for my post is because it stopped working again. I can't figure it out and it's driving me nuts. Could this be an issue with the setting where you can select which network your own for example work, home or public location?

Read other answers
RELEVANCY SCORE 78.8

I'm running a simple network at home with a Linksys BEFSR41 router. I have two computers hooked up wired and a wireless router acting like an access point that I use for my laptop occasionally. Until this weekend I've been having no problems but I shut down the computers due to weather and now one of them is not able to communicate with any others on the network. The problem computer will get an address supplied to it by the router (DHCP server) but once it has it I cannot get any other connectivity. Of course this is hindering internet access on this computer. I can ping the loopback and assigned IP addresses w/o problems but when I ping the default gateway (router) and/or the other computer I get "Request timed out." I initially thought it was the NIC so I bought another one but still get the same issue. I've moved the cards to different PCI slots but no luck. I tested the cable running from the computer and the router but found no problems. I even tried resetting the TCP/IP stack but still didn't work. The computer in question is running WinXP SP2 with the original NIC being a Linksys LNE100TX and the new one being a D-Link DFE-530TX+.

Any clues on this? If more info is needed let me know--it's been a while since I've posted. Thanks in advance.
 

A:Solved: Getting IP addr from DHCP but cannot ping DHCP server

Read other 11 answers
RELEVANCY SCORE 78.8

I need the IP address ,DNS and gateway address so on .Is it possibile to get it from the modems DHCP or do I need the ISP DHCP working?

I'm setting up are home network and getting connected to the internet but the internet connection is down .But is it possibile that I can get this from the modem. .

Like how does the computer talk to the modem and the modem talk to the DHCP server .I never had this problem before.
 

A:Can you get DHCP info from the modem software even when the DHCP server is down

Read other 8 answers
RELEVANCY SCORE 77.2

My WinXP Home PC won't connect properly (limited connectivity/no internet) via ethernet cable to my router (Belkin N150).

Ipconfig /all shows the IP address as 169.254.117.71 but this is determined by an entry in the registry at HLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{39A...} > 'DhcpIPAddress' - REG_SZ - 169.254.117.71. Also listed at 'IPAutoconfigurationAddress'. My laptop connects fine plugged into the same port getting it's IP automatically (192.168.2.2) and getting internet fine.

After much searching I can't figure out what's wrong.

I've tried adding a DWORD entry 'IPAutoconfigurationEnabled' = 0, also tried deleting the 2 values.
Tried setting the IP manually to 192.168.2.6 - limited connectivity goes away but I get no internet connection from the router nor file sharing.

Any help please?
 

A:Solved: DHCP IP by registry not by DHCP server??

Read other 8 answers
RELEVANCY SCORE 77.2

QUESTION #1:
Is it better to use Win2000 Server DHCP or DHCP from my Netgear wireless router?

#1 BACKGROUND:
I am currently in the process of setting up a Win2000 server on my home network which consists of four other 2000/XP machines.
The server is going to be configured as a domain controller and will utilize the Active Directory.

Should I use the Win2000 Server DHCP or stick with my wireless router as the DHCP server? What are the advantages/disadvantages to both and which would be easier to maintain.

QUESTION #2
Is a 550mhz PIII with 256MB RAM fast enough to make a good home server running Win2000 server?

BACKGROUND #2
The server is going to have (2) 120GB Western Digital 7200rpm drives with 8MB cache for storage and a single 60GB Western Digital 7200rpm drive for the OS and few other applications.

The server's primary function is to serve as a media server with an approaching 10GB of MP3 and music video files which is continually going to grow. Disk contention is at a minimum since there are only four PC's on the network. There will also be a lot of digital photos stored on the server and will also serve as a place to perform backups from the other four networked PC's.
 

A:Win2000 Server DHCP or Router DHCP?

We have a similar setup in our office using Small Business Server, a public IP coming into our router with DHCP turned on, connected to a NIC in the internal DHCP server (which is also running ISA). A second NIC in the server bridges to the internal hub to provide DHCP services to the clients. This way we control port filtering in 2 places and with 2 levels of NAT taking place we feel secure. It may be overkill but we're concerned that EVERYONE is trying to hack into ISA and DHCP servers connected directly to public IP that this setup provides an added level of security.
 

Read other 1 answers
RELEVANCY SCORE 75.2

I have installed the admin pack on a client XP workstation so that I can use Active Directory without having to log onto the server. However the exchange tabs (exchange general, exchange features, exchange advanced and email addresses) in AD are missing from the client PC. I want these tabs on there, does anyone have any ideas? Thanks.
 

Read other answers
RELEVANCY SCORE 75.2

Hiya

You can use the Web Administration Tool to configure and administer Proxy Server from any computer using a Web browser. The Web Administration Tool can be used instead of Internet Service Manager (ISM), which is provided with Microsoft Internet Information Server (IIS). The Web Administration Tool and ISM provide similar functionality for administering Proxy Server. Please review the release notes before you install the Web Administration Tool.
System Requirements
Supported Operating Systems: Windows 2000, Windows NT

Note: Proxy Server version 2.0 must already be installed on the computer on which you are installing the Web Administration Tool.

http://www.microsoft.com/downloads/...81-0642-4052-b16c-37dcdaa896d2&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 74.4

Hi guys,

am jus doin some revision for my Microsoft Server Adminstraion module at college and i came across some questions that I havnt been able to answer, if someone could give me a few pointers or a good website i'd be very grateful

1.What are some key differences between NT4 and Windows 2003 with respect to promotion and demotion of Domain Controllers?

2.Does the use of Profiles have a place in the administration of a 2003 server domain? If so how do Profiles and Group Policy complement each other?

3.You have delegated authority to another user in the tree to modify GPO’s for parts of the tree – for what reasons would you do this?

any help would be much appreciated

Thanks in advance
 

A:Solved: revision help! Microsoft Server Administration

Read other 6 answers
RELEVANCY SCORE 74.4

Hi all,
How do I administer SMTP Server on Windows Small Business Server 2003 R2?
 

Read other answers
RELEVANCY SCORE 71.6

Not getting IP from Dhcp server.
Checked in Dhcp Error Showing BAD Address.
IP 20-25 % IPs are showing free..

Read other answers
RELEVANCY SCORE 71.6

Right now I have my server connected to a router and the router does the dhcp for me. I am thinking of putting a second nic in the server and using it for dhcp. If I have computers in the house that are not a part of my domain will I still be able to get online with them if they are connected to my switch? I guess to paraphrase myself I am asking can you use a server to route and not have everyone connected to the server in your domain?
 

A:Server DHCP or No

I'm not sure what DHCP has to do with routing... Are you trying to break your network into subnets?

You wouldn't need a second NIC to move DHCP to your server. If you want to move DHCP from your router to your server, just set up a new DHCP scope on the server and that's all that's required. Clients do not have to be part of the domain to get an address from a DHCP server.
 

Read other 1 answers
RELEVANCY SCORE 71.6

I'm using a DHCP running on Windows 2k3 server. What could be the problem if every time someone using his cellphone connects to the network, the internet connection automatically drops....
 

Read other answers
RELEVANCY SCORE 71.6

Here is my current configuration:

We have 7MB/768K DSL Business dynamic IP connection.
Anywhere from 10-20 simultaneous users.
One Cisco 30 port switch feeding into one Linksys wireless router to provide local IP addresses to all the users for the one IP address to the world.

It seems to me we have a huge bottleneck at the wireless router but we need it for the DHCP server in that router.

Are there any low cost solutions that would provide faster performance for the users?
 

A:DHCP Server (Do I need one?)

Hi skibizkit, and welcome to TSG.

skibizkit said:

... provide local IP addresses to all the users for the one IP address to the world.

It seems to me we have a huge bottleneck at the wireless router but we need it for the DHCP server in that router.Click to expand...

Sharing a single Public (world) IP address with multiple Private (local) IP addresses will require some type of router that supports NAT (Network Address Translation). Running a DHCP server on the router should only add a small amount of local bandwidth usage when a computer first connects to the router and gets assigned its private IP address by the DHCP server. The DHCP server is then out of the picture until another computer comes on line or the DHCP lease time (could be up several days) expires for each computer.

Is the speed bottleneck related to accessing the Internet through the DSL connection or exchanging data between computers (and servers) on the same local network?
 

Read other 2 answers
RELEVANCY SCORE 71.6

I had to reinstall windows2000. When I went to load Road Runner it can't release/renew an IP address. The modem is fine. The router is fine. The other computer in my house sees the internet but my does not. Can someone give me some idea on what to do? Thanks.
Debbie
 

A:DHCP Server

Read other 13 answers
RELEVANCY SCORE 71.6

running winxphomesp2 on abit kt7-333 with intel 10/100pro V onboard networking

working fine then suddenly this morning while browsing ( no downloads / no installs)
systray icon shows yellow ! and loses connection

router is linksys wrt54g default gateway 192.168.1.1

ip num 192.168.1.101 changed to 169.254.240.41
ipconfig /release clears ip
ipconfig /renew fails due to timeout
no other comps online affected

ip config /release then boot
reverts to 169.x.x.x

uninstall network device and boot
windows new device found wizard opens locates identifies installs driver
tcp/ip auto configured to get ip auto get dns auto dhcp enabled
renew ip fails timeout
ip defaults to 169.254.240.41 again

connect pc directly to cable modem
reset cable modem and boot computer
no effect

nic shows enabled and working normally but no connectiivity to lan or internet

any ideas what why how happens
what to do to repair
what to do to avoid repeat
do i have to get a pci nic and disable this one in bios?
 

A:Can't get IP from DHCP Server

run this command in the command prompt tool

ping localhost

and post results

thanks
 

Read other 3 answers
RELEVANCY SCORE 71.2

Whats going on with this?

When is a fix due out?!

I just downloaded with the windows 7 sp1 iso only to find out i cant install the RSAT tools on SP1

A:Windows 7 RSAT tools SP1

Quote:
**Remote Server Administration Tools for Windows 7 can be installed ONLY on computers that are running the Enterprise, Professional, or Ultimate editions of Windows 7. This software CANNOT BE INSTALLED on computers that are running Windows 7 with Service Pack 1 (SP1). To run Remote Server Administration Tools for Windows 7 on a computer on which you want to run Windows 7 with SP1, first install Remote Server Administration Tools, and then upgrade to Service Pack 1.**

This software is not supported on computers that are running Windows 7 with Service Pack 1 (SP1). If your computer is running Windows 7 with SP1, and you try to install Remote Server Administration Tools for Windows 7, the following error message is displayed: "The update is not applicable to your computer." This limitation is by design, and is documented in the Windows 7 with SP1 Deployment Guide.

To run Remote Server Administration Tools for Windows 7 on a computer that is running Windows 7 with SP1, first install Remote Server Administration Tools, and then install Service Pack 1. The service pack updates the installed Remote Server Administration Tools for Windows 7 files to be compatible with SP1. This workaround applies only to the SP1 upgrade; it will not work if you install Windows 7 with SP1 from a DVD. Remote Server Administration Tools for Windows 7 with SP1 is scheduled for release in Spring 2011.


https://www.microsoft.com/downloads/...43997d&pf=... Read more

Read other 2 answers
RELEVANCY SCORE 71.2

Hi
I'm using windows 8.1 64bit
I had installed the remote server administration tools so I could run AD commands within powershell and this was fine for months

I was getting errors such as    "Error initializing default drive:  'a call to SSPI failed see inner exception..."
I uninstalled the remote server administration tools with the plan of reinstalling to see if that fixed the problem.   Problem is now the rsat tools wont install at all Ive tried several times and each time to installation seems to get to the end
then present s the error.    The following updates were not installed  Update for windows (KB2693643)
I'm using the installer suggested by MS web site   Windows 8.1 KB2693643 x64
Thanks for reading
Confuseis



confuseis

Read other answers
RELEVANCY SCORE 71.2

A brand-new Compaq workstation running Windows Vista has to log in to the Dell PowerEdge server (running Windows Server 2003) every time it reboots. Each time we log in to the server from the workstation, we check the box that says, "Remember password," but it doesn't. My assumption is that it's a security issue somewhere, but since I'm new to Vista, I don't know where to start. The workstation is pre-loaded with Windows Defender, Norton Protection Center and no telling what else.

Anybody know a good starting point?

Thanks!
 

A:Workstation can't remember server password after reboot

Update... actually, the workstation doesn't have to be rebooted to require a log-in to the server. As soon as someone connects to the server from the workstation and closes whatever window was open, the server can't be accessed again without logging on. But if you log on and leave the server folder open, you can work all day without logging in again. Hmmm.... I've never seen anything like it.

Thanks in advance for any suggestions!
 

Read other 1 answers
RELEVANCY SCORE 70.8

Windows 7 Home Premium x64 SP1
Computer: Sony Vaio VPSCB11FX
Router: Apple Airport Extreme
Windows Security Essentials
Windows Firewall Disabled during tests.

Getting FAILED no repsonse DHCP server on IntelPRO wireless test. Tried ipconfig release+renew. Tried using Latency Optimizer and connectivity fixer PRO. Tried turning everything off, then turn on Modem-Router-one and one computer. Nothing works. Other wireless connections in the house work fine. Driver is up to date.
Connected directly to router with ethernet cable also works fine.

http://www.speedtest.net/result/2692745146.png

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Luftwaffle>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Luftwaffle-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : getinternet.no

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : getinternet.no
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : F0-BF-97-5D-97-96
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix... Read more

A:No Response DHCP Server

Read other 6 answers
RELEVANCY SCORE 70.8

I Have a new dell machine which is set to automatically detect the dhcp server (ip address) but it does not detect the dhcp server and sets its self a private ip 169.254.0.0 address. I have tried ipconfig from the cmd and it will not release when i do this and reboot the ip is set 0.0.0.0 and then pics upthe private address. the renew command returns the message unable to connect-time out error, is the a hardware problem or program problem.
stav
 

A:Dhcp server not detected

Read other 11 answers
RELEVANCY SCORE 70.8

Is it okay or dangerous to trust my wireless router?

A:Is it okay to trust the DHCP Server?

The IP address 192.168.0.1 is the default for certain home broadband routers, principally various D-Link and Netgear models. This address is set by the manufacturer at the factory, but you can change it at any time using the network router's administrative console.http://compnetworking.about.com/od/routers...168_0_1_def.htmBut also see http://www.bleepingcomputer.com/forums/top...tml#entry999836

Read other 2 answers
RELEVANCY SCORE 70.8

I have win2003 server and my dhcp server quit giving IP's when a lease runs out. I have tried to reboot the serever and I have tried to start and stop the DHCP service to no avial. Now I have had to go to all the machines in our office and give them static IP's. Does anybody know how to fix this?

thanx
 

A:DHCP server not working

Any error messages in Event Viewer on the Server or Clients.
 

Read other 2 answers
RELEVANCY SCORE 70.8

Is it better to have my win2k server distribute IP's, or my my router? Is there a difference? Are there any benefits or drawbacks from doing it one way or the other? What would happen if both are set for DHCP? Thanks
 

A:DHCP: server or router?

Read other 9 answers
RELEVANCY SCORE 70.8

the DHCP server is probably the correct way that i have to approach the previous networking ip address dorm question. It is perplexing, in that other students also have gotten the same type of ip address conflict. I take it that that would more than likely indicate that DHCP is in effect. What to do from here? Kindly advise further

Again, THANKSi
 

A:DHCP server follow up

Please respond to your original post - do not start another as it gets confusing. I'm going to reply to your original. Do not reply to this post.

Thanks!
 

Read other 1 answers
RELEVANCY SCORE 70.8

Work in school with about 35 w98 clients and nt 4 server, recently had broadband installed so I had to change the IP address on the server as requested by broadband company then set up new dhcp scope for clients. Server reboots with new ip but cannot release and renew ip addresses on clients. (I had logged them all on ready.) Activated and reactiveted scope, changed ip back to orginal it all works but when you change it back to new settings clients can't see server, I gave one client a static address from the new range (an excluded number) and it logs on sweet as a nut - so I'm thinking dhcp problem. Also when I do IPconfig on server it gives 2 nic addresses for one mac address why?Any help would be appreciated!
 

A:nt server dhcp problems

Begining is the best solution!! hehe! So, You should do your DHCP as a new one, anyway, you were given a new IP, so it's absolutely new, isn't it!
Try mine!
Seperate DHCP from network, simply unplug the connector!
Stop DNS, delete your DHCP scope.
Uninstall, yes, uninstall you NIC!
NEXT! Do it in reverse!
Reinstall you NIC by restarting Windows! type cmd in Run command and ipconfig /all. How many NIC you have now? ( ofcourse, after you set the static IP, subnet...)
Restart DNS.
Create new DHCP scope, activevate,... ( Be sure you do it completely right).
Now, renew until DHCP work, ( Until you see the green light, you knew it).
Now, test DHCP in client by plug the connector!
Try this first!
 

Read other 1 answers
RELEVANCY SCORE 70.8

Hi,
I was created a DHCP server in Server-2008 r2 but it didn't provide IP automatically to client and on the other way in the roles sections when I click on DHCP, it didn't expand as other roles expand.
Please provide the solution.
Thanks,
Shashank Saxena

Read other answers
RELEVANCY SCORE 70.8

Hi Geeks!
I want to backup my DHCP server. I want to make sure that if my DHCP server goes down for some reason there is a server at standby that can come and takeover as a DHCP server and start leasing the addresses.
Or if i can add an additional DHCP server.
My Current DHCP Server is Windows 2000 Professional.
Is there any way that i can create a DHCP backup server as in case of Active Directory...

Kindly let me know if anyone has any sort of solution
 

A:Backup DHCP Server

Read other 6 answers
RELEVANCY SCORE 70.8

In the DHCP Options: Scope, Active Options area I selected & added 003 Router, 006 DNS Server, 044 WINS/NBT Servers, & then a window opeded saying that I needed to add 046 WINS/NBT Node Type & to select 0x1=B node, 0x2=P node, 0x4=M node, 0x8=H node. Online help doesn't give any help with which to choose? Does anyone have an idea & what is the diference? Thanks for any help
 

A:{Advice Given} - NT4 Server DHCP

Read other 7 answers
RELEVANCY SCORE 70.8

You may be thinking at first that this would be a typical 169.x.x.x thing, but it is far from. I've tried doing the winsock and tcp/ip fixes and nothing seems to work. There are two PC's currently on my topology, and my PC works perfectly fine. So it is apparent that the other computer has a phony DHCP server hosted locally on the other computer.

The Router: 192.168.1.1
Router's DHCP range: 192.168.1.100-49
Offending computer's IP: 192.168.16.129 !!!???

I have run the Smitfraud fix and in the log file it returns some pretty interesting entries regarding this 192.168.16.254 DHCP server. I tried deleting the offending registry keys listed in the log file, but to no avail.

Tried disabling the DHCP service, tried assigning statically, nada.

So it would appear that it has been hijacked, but i have no idea how to remedy the situation. Any ideas?
 

A:Phony dhcp server

Read other 7 answers