Over 1 million tech questions and answers.

Canon Pixma iP5200

Q: Canon Pixma iP5200

Hi,

I have installed driver (b6C05MUx.exe) for Canon Pixma iP5200 which
Vista does not recognize.
The driver was downloaded from Canon and is compatible with my Vista.
Please advice how to make the printer work.

Thanks,
Martti

RELEVANCY SCORE 200
Preferred Solution: Canon Pixma iP5200

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Canon Pixma iP5200

Hi, On the Canon site it is this driver ip5200vst200ej.exe here is the link http://support-au.canon.com.au/EN/search?c...p;menu=DownloadMake sure you get the Vista driver.Uninstall the canon printer before installing the new driver and follow the install instuctions as you have to install the printer following the correct steps.

Read other 2 answers
RELEVANCY SCORE 80.8

Hello,
I'm not sure I'm on the right site for this question, but I can't seem to find a better one - so here goes: My Canon iP5200 suddenly started flashing alternating yellow and green lights, and won't move the head to the correct position for printing. I've used it for 2 or 3 years with no problems til now.
The last thing I did before this problem started was to try to extend my blue printer cartridge by shaking it, then replacing it. (I had already done that a few weeks ago successfully.) When the lights started flashing, I thought I must need to replace the cartridge, so I did - with no change. It makes no sense why I would suddenly have this problem...
Does anyone have any idea what's wrong? Help!
Loralee

PS I realize that this may be something addressed in the manual, but unfortunately, I can't find the manual...
 

A:Help With Canon iP5200 printer

Read other 7 answers
RELEVANCY SCORE 80

Where can I get a Windows 10 driver for my Canon ip5200 printer? Canon doesn't make one.

Thanks,
jnix
 

A:Canon ip5200 printer Driver

The only supplier for hardware drivers (99.9% of the time) is the hardware manufacturer. If Canon doesn't offer a driver, you aren't likely to find one.
 

Read other 1 answers
RELEVANCY SCORE 72.4

I have a Canon i850 printer which I have immensely enjoyed using these past four+ years. For one thing, I've never had even one paper-jam during that time.

My understanding always has been that it is best to have separate components, so that's why I've always owned a dedicated printer. However, it appears that the present-day trend is more toward all-in-one units. Actually, I'm in the market only for a printer, but if the Canon MP600 all-in-one is technologically advanced far beyond my i850, then I would strongly considering buying one.

The MP600 has a scanner (which I don't need, although it would provide me with a back-up) and it has several modern features of convenience which my i850 doesn't have. What I would especially like to know is whether or not the MP600 produces appreciably better results with both text and photos than my i850. Also, would it be faster and cheaper in the long run than the MP600? While quality of results is more important than anything else, speed, economy, and convenience also enter into the equation.

(I was also considering the Canon PIXMA iP6700D photo printer, but from what I've read so far it appears that the MP600 all-in-one is more highly-regarded.)

I would appreciate hearing from anyone who has an opinon on this matter. Thank you very much.
 

A:Canon i850 printer vs. Canon Pixma MP600 All-in-One

Read other 9 answers
RELEVANCY SCORE 65.2

Canon PIXMA250 Series Multifunction Printer prints test every time.
 

A:Canon PIXMA 250

Prints the word "test"?

Prints every time you turn the printer on? Every time you try to print a document or photo? How does this event relate to Vista?
 

Read other 1 answers
RELEVANCY SCORE 65.2

My Canon Pixma IP4200 is flashing the light on the resume button 5 times. I hve tried resetting, switching off, restarting computer to no avail. What else can I do?

A:Canon Pixma

Press theResume button when the button is blinking. If that fails, unplug the USB cable and the power cable from the computer end. Wait a few seconds and plug the power cable in. Wait a minute and plug the USb cable in.

Read other 3 answers
RELEVANCY SCORE 65.2

I updated my driver for this printer in order to use it with a new VISTA computer. In doing this, my XP laptop, can no longer use this printer. Is there a simple solution to this?

A:Canon pixma MP 780

Updating drivers usually doesn't affect the hardware itself. Its strange that it simply stopped working because you installed vista drivers on another computer. My Pixma was simply a plug-and-play from my vista desktop to my XP laptop.

Can you provide more detail? Does the computer detect the printer but it simply doesn't print? Or is the printer undetected completely? Maybe you could try uninstalling then installing new drivers for it.

Canon Australia - PIXMA MP780

Read other 4 answers
RELEVANCY SCORE 65.2

I use Canon Pixma printer with Windows 7. When I want to scan and e-mail the colours of my computer change radically. I cannot get a full picture reproduced either. Only part of it is reproduced. I had to do a system restore to get the computer to remove the ugly colours. This is the second time that it happened. Please help.
 

A:Canon Pixma

As regards not being able to reproduce a complete picture, try reducing the 'PPI' setting in your scanner software prior to scanning. Whilst 300 ppi is considered the optimum setting for photo scans which you intend to print, that's way too high for an email. Try scanning at 150 ppi or even 100 ppi if it's only for an email attachment.

The scanning time will then be much shorter and there will only be half as much data for the PC to cope with (compared to scanning at 300 ppi).
 

Read other 1 answers
RELEVANCY SCORE 65.2

I have an error message E2 that stops me using my printer as i live in Thailand and the instructions are in Thai I can't overcome it. I have tried some of the sites that give the switching and resets for various thing such as Waste tank but to be honest I'm not sure what they are or what they mean, I have followed the instructions but nothing happens, it says that it is out of paper or jammed but I can't find one its clear. Please help I'm desperate to get some work done
 

Read other answers
RELEVANCY SCORE 65.2

I am running Windows 7 in a virtual environment using Parallels on my iMac intel.  My Pixma printer shows up in the printers list in Windows but refuses to print.  The documents are neatly lined up in the queue but nothing happens.  I have looked for new drivers and can find none that I have not already installed.What to do?

A:Canon Pixma MP 470

 
Hi,
 
Canon has not released a Windows 7 driver for your printer.
 
You can try the latest driver for Windows XP or Windows Vista from here:
 
If the issue persists, I am afraid you have to wait for Canon to release a Windows 7 driver.
 
Tim Quan - MSFT

Read other 3 answers
RELEVANCY SCORE 64.4

Urgent help please.

This printer normally connected through USB to pc running Windows XP in room 1.
2nd wireless pc running Windows 7 Ultimate 64bit in room 2.
Connected printer through USB on Win 7 pc and windows updated drivers ok and everything printing ok.
Then re-connected printer to XP pc ( in different room ) and set up printer and file sharing.
When adding printer wirelessly to Win 7 pc the windows update cannot find any drivers for this model and yet it does when running through a USB connection!
Can anyone tell me where on the Win 7 pc I can locate the drivers that were installed when printer was connected via USB or how to get around this problem? Drivers that can be downloaded from internet seem not to have an INF extension which Win 7 requires for installation.

May be being dense but can you tell me what I should be doing?

A:Canon Pixma iP4200

hi maureenmcn ,welcome to the forums , have a read of this thread Canon Pixma IP4200 it may contain the information you require

Read other 5 answers
RELEVANCY SCORE 64.4

Bought a Canon MP 750 on Wednesday. Seems to print well, but not happy with the results of walk up copy and also scan to computer/print.

Original printing from the computer, print alignment, print nozzle checks etc are all OK. It seems there is a problem with the scanning - copies come out significantly less colour intense, at times with bits even missing from the copy.

Rang Canon for support and returned machine to store on Friday & got a second one. It seems to fare no better.

At this stage I will be ringing Canon again on Monday - but in the meantime I'm interested to hear from anyone else with this machine.

Can anyone tell me what happens when you select the copy button, and then "colour"? Do you get the following message:

Colour copying......

or do you get

Scanning.....

followed by a request for the next page or to click OK to exit?
This then followed by

Colour copying....

as above?

The reason I ask is that on the first machine we only ever got "colour copying" followed by the scan and the print out.

On the second machine, the first two times we did a copy it gave us the scan message on the display first, followed by the copy message. However from the third copy on it has always only ever been "colour copying...."

If I use the software to scan into the computer I can set different scanning resolutions....but when I print out I don't see any marked improvement.

The above was using the image quality "normal&q... Read more

A:Solved: Anyone own a Canon Pixma MP 750?

bump
 

Read other 2 answers
RELEVANCY SCORE 64.4

can you help me about my printer
coz its print with a yellowish picture
 

A:canon pixma mp 237 printer

This is the example
 

Read other 1 answers
RELEVANCY SCORE 64.4

mp navagator requires 800x600 or higher resolution and higher colour
(16 bit) or better mode

ps my bios was upgraded now my mp navagator doesnt work
 

Read other answers
RELEVANCY SCORE 64.4

How can I troubleshoot the waste ink full?

I have already tried cleaning and replacing the foam but when I am going to print again, there is this waste ink full window that shows up.
 

A:Canon Pixma IP1000

Look for a plastic bottle of some sort and empty it out. (Not the toner cartridge!!!)
 

Read other 2 answers
RELEVANCY SCORE 64.4

My Canon PIXMA MG6120 doesn't print the text in a document containing both text and photos. I think the driver may be incorrect, but am uncertain which driver to load from the Canon website. I am running Windows 7 Ultimate 32 bit on an HP TouchSmart 600-1050. Any suggestions?
 

Read other answers
RELEVANCY SCORE 64.4

Hey peps.

anyone have this driver for Windows 7 64 bit? i couldn't find it for the love of God. only found that utility stuff on their site.

A:Canon Pixma IP4200

1. Use Windows Update, it will install the driver automatically
2. Install driver add-on and software from canon website

Read other 8 answers
RELEVANCY SCORE 64.4

Error code 5100. Recommended action to turn off printer and turn back on again. Does not work. Any ideas?
 

Read other answers
RELEVANCY SCORE 64.4

Hey Folks, I have a Canon MP160 and I am trying to print photos, but they always come out redder that I want, I found some NTSC Color Bars and printed them and Magenta is purple and red is deep orange, I did a monitor calibration with a Spyder Pro and thought that corrected the problem but to no avail, any suggestions?
 

A:Canon Pixma MP160

what kind of printer are using
are you using the correct profile for the type of paper

getting a print to look like it does on your monitor requires carefull calibration and printer profiling

http://www.google.com/search?hl=en&q=printer+profile
 

Read other 1 answers
RELEVANCY SCORE 64.4

This is an extremely basic question ...

I only turn my printer on when I need to use it, which is not too often. By chance, I happened to look at Control Panel/System/Device Manager/Disk Drives while it was connected, and I was quite astonished to see the following entry:

Canon MP600Storage USB Device

followed by all my regular HDs (3 in all).

Is this normal under VISTA? I ask as I have some problems with certain USB-attached devices, and am trying to isolate the problem.

Thanks in advance.

Read other answers
RELEVANCY SCORE 64.4

Windows Xp

I have used my Canon MP500 for two years. It prints OK but it won't scan. About 18 months ago it completely disappeared from my computer. I tried to take the computer back to a date when it worked but it wouldn't allow me to do so. After reloading it twice it finally worked again. Now it has disappeared again. When I find Omnipage the message comes up "The parameter is incorrect"
Why does it suddenly disappear? I can't think I have done anything to make it do so.
 

A:Solved: Canon Pixma MP 500

Read other 7 answers
RELEVANCY SCORE 64.4

error problem 6000 keeps showing up and i am unable to print???

Read other answers
RELEVANCY SCORE 64.4

I can print pictures that are on my Samsung laptop, using my Canon Pixma MP620 with a USB cable, but when I try to scan a picture and send it to my laptop, nothing happens. A window opens asking me what device I want to use and only shows my old Epson (which I no longer have) When I go into the control panel & click on hardware and printer, it shows my Canon MO620 and has a green checkmark by it so I'm pretty sure it's capable it just won't cooperate! Thanks for any information!
 

A:Using a Canon Pixma with Windows 8

Does Devices and Printer also list the MP620 listed as a scanner? My Canon MX490 Shows up 3 times as Printer, Fax, and Scanner. I yours does not show as both a printer and a scanner, you may need to reinstall the driver software.
 

Read other 2 answers
RELEVANCY SCORE 64.4

I have istalled the latest driver and program from Canon support site.
But I get the bluescreen with the error:
STOP: 0x0000009C (0x00000004, 0x00000000, 0xb2000000, 0x00020151) ...

The driver to the printer Canon Pixma ip4500 should work with Vista x64.

I have Windows Vista Ultimate x64.

Please help me.

A:Canon Pixma ip4500

Hi Spiderfreak!

Here is a link to Canon website for the latest Canon driver. Just pick your printer from the list then choose the OS (Vista x64) and download/install. Hope this helps.

Since you did not specify you got your driver from their website I figured I'd look.

Download Library - Canon USA Consumer Products

Raj

Read other 1 answers
RELEVANCY SCORE 64.4

Hello Friends,I.m facing a ‘printer problem’ My o/s is xp home sp3 and I have a Canon Pixma IJ 1600 printer connected which was working fine till date.All of a sudden , it has stopped detecting my color cartridge.Whwnever I start printing, I get the following error message:-

“The color cartridge can not be recognized.Install the appropriate cartridge”
I have uninstalled rhe cartridge several times,removed the printer and driver and then reinstalled it but to no avail.I do.nt know what to do?Please help.thanks
 

Read other answers
RELEVANCY SCORE 64.4

I have a Canon Pixma mp280 printer that I've used for a few years. Suddenly, when I go to print something from my computer, it doesn't even show my printer as a printer option. I can't find the hardware for my printer. It still scans and prints that way, just not from computer. Help.
 

A:Canon Pixma mp280

Uninstall the Canon software/drivers, reboot, and perform a fresh install following the Canon process.

You can use the install CD provided with the printer, or the better option would be to get the latest driver package from Canon.
 

Read other 1 answers
RELEVANCY SCORE 64.4

Guys i just bought All in one Canon PIXMA MP230 ! And i installed it as the manual guide says ! but after installing it , i cant use the scanner !! the printer and the copier are working fine ! But when i press scan document or use the IJ Scan Utility to try to scan a document i get this error .
I have uploaded the error in a picture so you can see it guys and help me !
Thank you so much.
 

A:Need help with Canon PIXMA MP230

You have the latest drivers and software?

http://www.usa.canon.com/cusa/support/consumer
 

Read other 2 answers
RELEVANCY SCORE 64.4

Hi

I just installed Windows 7 and my printer doesn't seem to work.. Its a Canon pixma MP160.. i guess i have to install the proper drivers.. could someone help me out with this?

A:Canon Pixma MP160

  
Quote: Originally Posted by jana


Hi

I just installed Windows 7 and my printer doesn't seem to work.. Its a Canon pixma MP160.. i guess i have to install the proper drivers.. could someone help me out with this?


You should be able to install the Vista drivers for it.

Read other 2 answers
RELEVANCY SCORE 64

I just got my
Canon PIXMA MG6450 out the box that my new job bought for me. I've pulled the tabs out as directed, plugged it in, the orange triangle with a bolt in it light is on, and when I press 'on' it does nothing. All other forums on the Internet keep saying 'go into settings..' Etc but it's literally not turning on to do anything. No idea with technology and don't know what to do any help greatly appreciated!!
 

A:Can't set up and turn on Canon PIXMA MG6450

You've posted your question 2 times, that is not allowed. Please only start one thread per issue. The thread in Hardware is in the right section so I'll leave that one open.

Link: https://forums.techguy.org/threads/unable-to-set-up-brand-new-canon-pixma-mg6450.1155878/
 

Read other 1 answers
RELEVANCY SCORE 64

Has anyone ever run into this crazy problem? I have a Canon Pixma 4300 that I got bundled with my MacBook pro. It's been sitting on my desk inert ever since. I cannot get it to print anything, anytime. I have uninstalled and reinstalled the drivers at least twice, reset the printer... I don't think it's a communication error because my laptop sees the printer, can check the ink, etc. Once I reinstall the drivers I can always print a test page exactly once, then never again. I get no error messages. Nothing.

Opening the print queue box it shows what ever job I'm attempting to print as "printing" but the printer never actually prints anything. If I pull the plug on the printer with a job in the queue I get a "can't communicate with printer" message, which tells me communication isn't the issue.

I'm running OS 10.6.8 on a 2007 MacBook pro. I know it's not my laptop since I've never had any problem with any other printer, including a PIXMA Pro 9000.

I'm thinking there's something either super easy to fix or that this printer is just a lemon that needs to go in the trash. Canon has been very unhelpful. Every once in a while I'll dust this thing off and try to make it work. Is it time to give up?
 

A:Canon Pixma ip4300 has NEVER worked

Read other 6 answers
RELEVANCY SCORE 64

My Canon PIXMA MX700 Printer isn't functioning as a network printer. During installation of it as a network printer, what it does is say "Communicating with printer." for a while and
then it says "The printer in the network could not be detected
automatically. Set the IP address of the printer to be connected." And no
matter what I select it starts over with "Communicating with printer." I corresponded with Canon via email, but in the end they just said to call their technical support. The printer is wired into the modem and plugged into the computer via USB, so I don't get the problem.

A:Canon PIXMA MX700 Printer

On my Canon MX870 I use the wireless connection but there is also an eithernet port. I believe what you are seeing is the wireless wizard attempting to connect wirelessly to the printer.

If you are using the wired or wireless connection you should not need to use the USB connection on the printer. Perhaps this has something to do with the problem?

Does the printer show up on the Windows 7 network map? Does it show as being connected in the routers settings?

Read other 7 answers
RELEVANCY SCORE 64

I recently bought this Canon product and it worked very well for about 6-7 months, but when we came back from vacation the black color faded and and gradualy disappeared.
I took the cartridges and the print head to the guys that refilled my cartridges (no problem here only second refill no leaks or dryed ink problems) and they told me that the printer head was clogged and that the pump that was responsible for the cleanining and deep cleaning funtions was not powerfull enough to unclog the head.
They unclogged the print head and it worked fine for the next 4-5 pages. By the 6t page black vanished again. I took the printer head back to the guys and they told me that it doesent have a problem .

So one out of two:

1. It's indeed clogged and i need to know what i can do to unclog it
2. The printer head is uncloged .... and i don't have a clue what i'm supposed to do now except posting on forums .

Thanks in advance.
 

A:Canon Pixma MP520 Problem

The print heads on the 520 are odd ones, if not unique for this type of machine from Canon - most of the other #8 based machines have the Black #8 in them as well - the MP520 doesn't, and uses that large #5, which is meant for text printing as its black - this is not the normal photo ink, which the #8s have in them, and is a bit thicker than the other colors (including the #8 Black). This means that it will clog a bit more often, including deeper clots between the actual head and the cartridge. What the refillers are using are flow sensors, which only detect if the ink is moving through the assembly, not if they are impeeded, and do so with a bit more pressure than what the printer normally generates.

What does all this mean? Well, here's what I would do...

1 - Using 409 or Fantastik (NO WINDEX) and a Q-Tip, I would clean all electrical contacts between the print head assembly and the printer (all those spots on the face of the print head, and all the little wire contacts inside the machine) to make sure no ink overspray is causing faulty print quality.

2 - Ye Old Desert Dish Trick - Take a desert dish and put a layer of 409 or Fantastik on it, and lay the PRINT HEADS into it (DO NOT SUBMERGE THE ASSEMBLY INTO THE 409 or FANTASTIK - only the print heads on the bottom) While it sits, make sure you keep the ink cartridges sitting in their respective slots, as you don't want the top of the print heads drying either. Come back an hour or so later and scrub the h... Read more

Read other 1 answers
RELEVANCY SCORE 64

When I try to print, I get a message, "Printer is performing another operation", there are no jobs in queue; also the LCD display reads " Set ink cartridge". Please help!
 

A:Canon Printer Pixma MX340

Read other 6 answers
RELEVANCY SCORE 64

Hi folks,

This is driving me nuts: Back in the fall when I switched over to Windows 7 Home Premium x64 from Vista Home Premium SP2 x64, I installed the software for my Canon Pixma MX700 multifunctional printer. I used the original Vista driver installer disc, and despite an warning message about a "known compatibility issue" the printer and scanning functions worked fine. I use the Pixma on the LAN via a wired ethernet connection. Worked fine for occasional scanning in November, December, and January.

Then for months I had no need to scan anything, just printing over the network with no problems.

Last weekend I needed to scan something. I usually just push the scan button on the printer, verify the computer it's going to scan to (it lists them), and away it goes. This time my computer threw an error about the scanner driver saying the scanner wasn't on the network. Huh? If the scanner's not on the network how did the computer know it was trying to send a scan... So I bailed on that and instead used the MP Navigator EX software on the computer. It failed too, giving the "scanner not connected" error, either using Navigator's direct interface or telling it to open the scanner driver which brings up a slightly different interface (when it worked).

First I went to the Canon site and d/l'ed all the latest drivers for 7 x64 and installed them. Still get the same errors.

Tried setting it up to scan via USB temporary connection. If I install it that way... Read more

A:Can't scan with Canon Pixma MX700

I had this problem too & I also have a MX 700. I didn't have quite the probs your having, but when I went to scan something, it would just sit there doing nothing.

The way I found after playing around with it was like this:

I had to go to Start/Devices and Printers.

I R clicked on the printer/scanner and clicked "Start Scan".

Once I did that, it worked for me. You'll get a window with all the options for scanning. For some reason Windows took over the scan feature, but it works, so I'm happy.

Mine is hooked up via USB also, but I'm not on a x64. Driver prob maybe?

Anyway, that's how I got mine to scan, I hope it helps.

Read other 9 answers
RELEVANCY SCORE 64

Anyone know why my magenta cartridge gets contaminated with black ink when the printer is left unused for a few hours?
 

A:Canon Pixma iP4200 ink contamination

Sounds like the black cartridge may be leaking.
 

Read other 3 answers
RELEVANCY SCORE 64

my canon pixma ip7250 has somehow got into service mode and i dont know how to get it back to normal
 

Read other answers
RELEVANCY SCORE 64

When i print a black and white mostly with small amount of color in the text only the color comes out with no b&w. I can copy a document with no problem so i know it is not an ink or nozzle fault. Any solutions please
 

Read other answers
RELEVANCY SCORE 64

I have a canon Pixma ip 1600 printer and been using refilled cartridges.All of a sudden my printer has stopped detecting color cartridge and as such I can not print blck prints either.No amount of hardare/software settings would do.
Is there any way by which I can take black only prints, using black cartridge only? Any method for bypassing the color cartridge completely?
Any advise is most welcome.
Thanks
 

Read other answers
RELEVANCY SCORE 64

Can anyone pint me in the direction for the Canon software for a Canon Pixma IP5200. I want to be able to once again print onto DVDs but cannot. I have aprint driver installed that works, but the Easy print toolbox and CD label print software from Canon won't install
Thanks

A:Canon Pixma software and drivers

I used Vista Canon drivers for mine... Running them in Vista Sp1 compatibility mode and installed as administrator... Worked for me.

Read other 3 answers
RELEVANCY SCORE 64

Hey Guys
I have a problem that i need some help in, i have a canon mp530 all in one and i have two questions that i hope you guys can really help me out with.
the first question is this: how do i go about resetting all the configerations on the printer to the point like it just came out the box and question #2 is: i also have a regular lan line phone and im trying to connect it to the canon and for some reason its making my phone go nuts. it either the phone rings and the fax dosent pick up or the phone rings and when i pick the phone all you hear a fax ring. i dont know what to do anymore im either going to throw this out the window or just take a dam hammer and smash it to pieces. please help me out here i would really appreciate any kind of help you can offer,

thank you
 

A:Canon Pixma MP530 All-In-One Printer

There is a firmware upgrade from Nov 08 that might be applicable since it specifically is for FAX problems. There is a list of serial numbers that need the firmware upgrade – be sure to read the instructions as firmware can be tricky. http://www.usa.canon.com/consumer/c...tegoryid=2613&modelid=13371#DownloadDetailAct

The latest driver is 1.10 from 2006 that is probably already what you are using.

Probably your best approach for resetting everything to default is to just uninstall the software and reinstall it. If that doesn’t work you would want to check “Printers and Faxes” & “Cameras and Scanners” to make sure they are removed and also look in Program Files to remove any residual folder left by the software. Usually an uninstall and reinstall works fine.

I take it you read the manual and set the machine to FAX/TEL Auto SW.

I take it you have a “land” line for your phone – a LAN is a local network. If it is a DSL line you usually don’t want the regular phone filter on the modem connection. The hookup varies according to the type of DSL – Canon recommends contacting the DSL provider.

If it is just a regular phone connection you could have a poor line connection. I had some modem problems many years ago and also had a little noise on the phone. The phone company traced the problem and I had no more modem problems. The firmware is supposed to help with tha... Read more

Read other 1 answers
RELEVANCY SCORE 64

I have a canon MP560 pixma printer that I am not able to print using the canon black ink. The cartridges are new OEM Canon cartridges. The printer has been idle for 1 year and is essentially new. I did a couple of black only deep cleanings but still prints black in a blue tone. I had Canon customer service tell me it could be a malfunctioning print head. Is there a way to clean the print head using alcohol and will this possibly clean the head without damaging it? I have used this method on other printers. Does anyone have another suggestions.
Thanks
 

Read other answers
RELEVANCY SCORE 64

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Pentium(R) CPU 2020M @ 2.40GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 2
RAM: 3985 Mb
Graphics Card: Intel(R) HD Graphics, -2039 Mb
Hard Drives: C: Total - 458597 MB, Free - 382225 MB;
Motherboard: Gateway, EG50_HC_CR
Antivirus: Windows Defender, Disabled

Previously used above mentioned all-in-one printer in the Windows XP operating system on my Dell 2400 Series machine. All applications worked. Tried to move printer to current computer within the Windows 8.1 environment. I can print and make copies with no problem. However, the scanner application does not function. Spoke with Canon technical support and did several tests including uninstalling, re-installing and rebooting system with no solution. Checked the Microsoft web site and spoke with technical support with no solution here as well.

Can anyone enlighten me as what is the possible solution for this issue? Thank you.
 

A:Canon Pixma all-in-one printer MG2120

Read other 6 answers
RELEVANCY SCORE 64

Hey Guys
I have a problem that i need some help in, i have a canon mp530 all in one and i have two questions that i hope you guys can really help me out with.
the first question is this: how do i go about resetting all the configerations on the printer to the point like it just came out the box and question #2 is: i also have a regular lan line phone and im trying to connect it to the canon and for some reason its making my phone go nuts. it either the phone rings and the fax dosent pick up or the phone rings and when i pick the phone all you hear a fax ring. i dont know what to do anymore im either going to throw this out the window or just take a dam hammer and smash it to pieces. please help me out here i would really appreciate any kind of help you can offer.
if by any chance this is not the place to ask for help on a technical issues, may you please direct me where in the forum should i go to get a answer.
 

Read other answers
RELEVANCY SCORE 64

I have a simple question that i cant seem to find a solution for. I have a Canon Pixma IP 6600 Printer. When I print borderless and the paper is taken from the upright feeder rather than the cassette no matter the size of the paper there is always a white line on the paper on one side. This line is not straight it is crooked across the paper. I use Canon Paper and when I emailed Canon this question I got a useless form letter in reply. Can somone help me. Thank you.
 

Read other answers
RELEVANCY SCORE 64

I just installed new color and black and white ink cartridges and now all of my emails and internet print jobs are printing in a light blue - documents in Word print fine in black and white. The nozzle check printout only showed light blue and black. Does this mean that my ink cartridges are faulty? It was working fine prior to replacing both cartridges. Thanks.
 

A:Canon Pixma MX330 Problem

If you perform a test print, you should get a quality check of each color (ie: red/yellow/blue and black or magenta/yellow/cyan and black). If you aren't getting a proper test print, the ink is low/empty or the print head is clogged). There should be cleaning and deep cleaning options in the printer options. You can attempt cleaning until the test print is correct.
 

Read other 1 answers
RELEVANCY SCORE 64

My Canon Pixma iP3000 printer worked fine when connected to my HP Vista computer. Now I have an HP p6616f-b with Windows 7 (64 bit) and I cannot find definitive info on the web as so whether or not they're compatible with one another. If they are, I'd need new software. Anyone know if compatible and where I could get software? Thanks
 

A:Canon Pixma iP300 compatibility with Win 7

Have you tried the Canon website?

Here's the link: http://www.usa.canon.com/cusa/suppo...xma_ip_series/pixma_ip3000#DriversAndSoftware

The printer is compatible and Windows will download the driver from Microsoft Update as per the information from the above link. You can download additional software from the Canon website for it though from the link above.
You can also check the Microsoft Compatibility site located here: http://www.microsoft.com/en-us/wind...Path=pixma ip3000&Type=Hardware&tempOsid=win7
 

Read other 2 answers