Over 1 million tech questions and answers.

ProxySettingsPerUser values changed to zero automatically after reboots and while try to delet key but it is reappearing after reboots

Q: ProxySettingsPerUser values changed to zero automatically after reboots and while try to delet key but it is reappearing after reboots

we are getting internet through proxy server everything works fine but suddenly users, unable to get internet after that we find out ProxySettingsPerUser values changed to zero,even after changing value to one it is becoming zero after system reboots
and we tried to delete the key but it reappears after reboot kindly help

Read other answers
Preferred Solution: ProxySettingsPerUser values changed to zero automatically after reboots and while try to delet key but it is reappearing after reboots

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


we are getting internet through proxy server everything works fine but suddenly users, unable to get internet after that we find out ProxySettingsPerUser values changed to zero,even after changing value to one it is becoming zero after system reboots
and we tried to delete the key but it reappears after reboot kindly help 

Read other answers

My PC is being automatically rebooted and i don't know why!

I am attaching the .dmp file:WD-20100131-1557.dmp

This is what the event log shows:

Fault bucket , type 0
Event Name: LiveKernelEvent
Response: Not available
Cab Id: 0

Problem signature:

Attached files:

These files may be available here:

Analysis symbol:
Rechecking for solution: 0
Report Id: 7c6f191b-0e9a-11df-9dba-002185595b09
Report Status: 0

Please help! I don't know what to do.

Thanks in advance,

A:PC automatically reboots

I will get an expert to look at your file. The ususal cause of reboot is overheating. I would go easy with the computer until the file is analzyed.

Read other 3 answers

I recently performed a repair install due to the dreaded blue screen (C00021a/0x80000007). Now it automatically reboots a few seconds after I see the Windows Start Up screen.

I have OEM-installed Windows XP Pro.

Any suggestions?


PS. When I did the repair install, I wasn't asked for the Product Key.

A:Pc Automatically Reboots

So many things come to mind, I am not sure where to begin.

Let's start here:

What brand and model of computer is this? Exactly how did you perform the repair install? While in the process of the repair install, did you reformat? (Technically a reformat is not part of a repair install, but some folks use the term when they really mean a clean install). Do you see any error messages? Has the computer worked properly at all since your repair install?

Please give much more info.

Read other 14 answers


I have Win XP Professional SP1 installed.
When my machine boots, after displaying the "Windows Xp loading screen" it automatically reboots.

if I start in Safe mode, it reboots automatically after loading the agp440.sys driver.

Any suggestions?

A:Windows XP automatically reboots

Try this link http://support.microsoft.com/default...b;en-us;324764
and run chkdsk /r

Read other 1 answers

System re-boots automatically when around 5 or more different applns are opened.. Gets re-booted automatically every one hour or so particularly if Windows Media Player s running.. On re-boot, it says system re-started due to overheating... and to press F4 to resume..

A:System reboots automatically

srang_viji said:

On re-boot, it says system re-started due to overheating... and to press F4 to resume..Click to expand...

So Overheating is the cause, try running Everest Home Edition and monitoring your Temps, and post them on here if you see anything out of the Ordinary.

Everest Home Edition - http://www.softpedia.com/get/System/System-Info/Everest-Home-Edition.shtml

Read other 1 answers

I was playing an online game this morning when the computer rebooted automatically and I got a message as belows:

Initialising Inter(R) Boot Agent Version 4.0.22
PXE 2.1 Build 083 (Wfm 2.0), RPL V2.73

The following configuration options were automatically updated:
No IDE fixed disk present

Compaq Presario 6195EA
F1:Save Changes <F10=Setup> <F12=Network Service Boot>

As a beginner I am not sure whether I should press F1 to save the above changes or whether this is some virus in the hard disc. Would appreciate some help.

A:Computer reboots automatically

No IDE fixed disk present
Click to expand...

You are fine to press F1 but if this error message is correct then you have an issue with the Hard Drive in the machine.

The BIOS is no longer recognising your hard disk, which means windows wont load or any of your programs.

Press F1 and see if you windows still loads, if it does then your in luck and should ASAP back up everything that is important to you on that machine.

Try and find out what make and model your Hard Drive is then you should be able to download the manufacturers tool(s) for checking the disk for problems.

Read other 3 answers

I have just formatted my computer and the only things on it right now are about 8 games and ms office. Whenever I try to play a game, for example CS source, I open it up find a server i want to connect to, hit connect, it goes through the loading process and right before it finishes loading, my monitor goes blank and after about 20 seconds my computer reboots. This only happens every so often (about 1/3 times i play CSS). Although on other game it happens every time. On Silkroad It freezes up at the beginning of the log in screen then goes blank and reboots. Also sometimes after it reboots I get a error report message saying "Microsoft windows xp has recovered from a fatal error, would you like to send an email to Microsoft containing..." with the option of "send an error report", or "don't send". Someone please tell me what's wrong. Any suggestions could help.

A:Windows automatically reboots

Try Checkdisk Xp, or Checkdisk Vista instructions

This may also be a Ram issue
Try running Memtest on your Ram

Read other 7 answers

i am using P6-2030IN, 64 bit, Intel(R)Pentium(R) CPU G620 @ 2.60GHz, 2GB RAM from HP with Win 7 Home basic OS. Last month, it was upgraded to WIN 7 Ultimate. Last week, Ubuntu 12.04 was installed.

Past 3 days, pc reboots randomly or sometimes after 1 hr or 15 min. i have tried the following methods. i was frustrated because it happens at peak hours of my workload.

while working with ubunut, i didn't faced the same problem in WIN 7.

i have tried the following methods.
1. My Computer, Properties, Advanced settings, Advanced Tab, Start & recovery and uncheck the auto restart option.
2. regedit, system, control001, control, crashcontrol, autorestart and changed the value from 1 to 0
3. at the time booting pressed F8, advanced boot options, disable autoreboot option.

nothing worked out.
Can anyone help me to solve this mind breaking problem.


A:WIN 7 automatically reboots randomly

Is the reboot time exact each time or scattered?

Whats your average cpu temp?

Have you recently made any hardware changes?

Installed something that might have been malware-ish?

Read other 2 answers

Hi all,
My computer reboots automatically while I am playing games. I cannot notice any patterns when this happens since on times it happens frequently and on other times not so frequent. Sometimes even when I am in the menu and not using the PC
I cannot find the source and have been trying for quite some time now but to no avail. I tried updating drivers but did not help.
Would really appreciate if somebody could guide me on finding the problem and maybe solution to this as it is beyond me. 
PC Specs:
CPU: Intel i7-4970K
GPU: GTX 970
RAM: 16 GB
PSU: Corsair CX750
Dxdiag attached
Thank you very much

A:PC reboots automatically during gaming

Let's try looking at these 2 sets of reports:Report Set #1)  Please run this report collecting tool (even though you may not be experiencing BSOD's) so that we can provide a complete analysis: (from the pinned topic at the top of the forum)   http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/If you have problems with it running it, there's an alternate tool here (direct download link):  https://github.com/blueelvis/BSOD-Inspector/releases/download/1.0.5/BSODInspector-1.0.5.exeNOTE:Please zip up the (.ZIP) files - do not use .RAR or other compression utilities. .ZIP is the type file that can be uploaded to the forums.Report Set #2)  Please do the following:- open Event Viewer (run eventvwr.msc from the "Run" dialog)- expand the Custom Views category (left click on the > next to the words "Custom Views")- right click on the "Administrative Events" heading- select "Save all Events in Custom View as..."- save the file as Admin.evtx- zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")- upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).FYI - If we're looking for Event ID 41 errors (unexplained shutdowns), there's more info on that here:  http://support.microsoft.com/kb/2028504The Event ID 41 error is simply Windows saying that it doesn't know why it shutdown.While waiting f... Read more

Read other 10 answers

I recently installed a new video card, following the directions to remove the current video card drivers first before installing in the new vid card.

Ever since that install, I've been receiving crashes from my computer everytime I'm running some sorta high graphics stuff like a Flash application on a browser, or games such as Counter-strike.

My new vid card is a ATI Radeon x1650 Pro 512 GDDR2 128bit.

Each time my computer restarts, I find this in the event viewer.

Can anyone interpret the following errors? I've done a search with no luck in pinpointing the problem.
Error code 1000008e, parameter1 c0000005, parameter2 bf82a2ec, parameter3 a735ab18, parameter4 00000000.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
My comp specs are 768 MB RAM, Pentium 4 CPU 2.80GHz, using XP SP2

If this is a matter of driver conflicts, how would I go about fixing it since I've already executed the uninstall of the old "onboard" video card drivers already.

Any help is much appreciated, thanks in advance!

A:Window's Reboots Automatically

Uninstall the video driver(ati Catalyst) from add or remove program, restart the computer and reinstall the latest driver from here


Read other 1 answers

after i see the windows xp logo it reboots. i tried booting in safe mode, last known good config, command prompt, bootlog and all of those and it keeps restarting. it wasnt like this when i installed xp a couple of hours ago. when i restarted my comp it just started doing this.

A:windows xp automatically reboots

Read other 11 answers


Can you please help me. When i turn on the computer this message comes on

Configuring update Stage 3 of 3 - 0% complete
Do not turn off computer

1 minute later the computer shuts down and then reboots again.

I can not log in or anything. it just turns on and off...

Is my computer gone. Is there anyway to still recover the files on my computer. I did not backup my kids pictures. I do not want to lose them.

So please if you can help me.

A:automatically reboots, unable to log in

Read carefully about the sequence of steps to repair this problem, enlist the help of a geek friend if needed.

How to restore your system, this is the first step, be sure to pick a date before you installed the problem updates.

Once the system will boot into windows again (after the restore process), download and install this update first thing, don't use automatic updates yet.

Then any other automatic updates that you get should install correctly.

Read other 1 answers

I cant get my pc to stop rebooting as soon as it gets to the desktop. im running windows xp pro.

A:Windows xp automatically reboots

1) Reboot. As soon as the system begins booting start tapping the F8 function key. When you get to the advanced boot options screen click on "Disable Automatic Restart on System Failure". Reboot

2) When you get into Windows, do the following:

Download BlueScreenView:
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

3) What is new or different since the last time everything worked properly (ie, new hw, new sw, virus, error, etc)?

Read other 4 answers


I just built a computer yesterday using a Coolermaster Haf 912 case, Gigabyte 880GM-D2H motherboard, AMD Phenom II quad core 955, Crucial Ballistix 4 Gb, WD 1 Tb Scorpio blue hard drive, Cool max 700 watt PSU, DVD drive and Windows 7.

It keeps rebooting and or blue screening. I can't even have it on long enough to download updates and try to update drivers before it crashes. I checked the bios temps and they are 34c and 41c. DDR3 memory is running at 1.5v. I tried reinstalling 7 and the same issues.

It will stay on in safe mode and I also got a Ultimate Boot CD 2010 from a friend and it stays on when I ran that. I don't know too much about the disc so I ran a memtest and it passed. I ran a quick test on the WD diagnostic and that was ok.

Thanks for help in advance.

A:Solved: New install randomly reboots or blue screens and reboots.

Read other 6 answers

I'm having an extremely weird vista startup error.
I just built my computer about a month ago and installed Vista Ultimate 64-bit SP-1. It took me about 15 tries, but I finally got vista installed. I updated the drivers for the graphics card and sound card, installed Norton Internet Security 2008 and Supreme Commander: FA, and it started doing this weird restarting stuff.

Once booted up, my computer runs fine. It runs Supcom: FA perfectly at all max settings with no slowdown and has never crashed once. This makes me think it is not a hardware issue.

Here's where the problems start. Every time I turn on my computer, the graphics card cycles the fan high, then low, high, then low eight times before it boots. It didn't do that before. I want to fix that because it takes a long time and the noise is annoying.
Once it boots up, I get the "Windows Error Recovery" screen and if I select "start normally," it starts to boot (green loading bar) then gives me a bluescreen for ~1/4 second (too fast to read or get a pic of) then reboots.
I get the "Windows Error Recovery" screen again and select "use previous settings" and it will sometimes start normally, other times I have to repeat this process. Every time I start normally, it crashes and reboots. Once it's booted, it works fine.

I tried booting off the install DVD and running "Repair My Computer"
First, I said no to using system restore. It said there was a patch... Read more

A:Vista 64-bit Startup Error: Reboots, Crashes, Reboots, Works


Read other 2 answers

Hello everyone,
simply put, computer automatically restarts on shut down. I do not get a blue screen with error message, even though I did uncheck the box in system properties so it does not automatically restarts. My system is definitely not overheating and all my hardware is relatively new (3 month).

Here what I have done recently:
- I have attempted to install additional 1GB of memory from OCZ and that did not work. I probably did not have enough voltage to my motherboard so it did not work, or the motherboard I have does not support OCZ memories. So I am left with my original 1GB.

- The thing that my cause the problem and I have not checked on it yet, is that I have updated BIOS yesterday. I downloaded a new version from the manufacturers website even though it says on the website that "if your system is running fine, do not update BIOS version"

I think that after that the problems have started. I have to check on that today, but if that does not work I do not know what to do.

If someone has any suggestion please let me know, I will really really appreciate it.


A:Computer automatically reboots on start-up

See if you can reinstall the previous version of the bios. This may be possible. It has been a while since I have tried rolling back a bios update. You would need the previous version obviously. Best of luck.

Read other 3 answers

Sorry, if it's a repost. I searched the forum & found almost similar thread but no specific resolution for this problem.

I reinstalled windows XP home in a new computer with a new HDD with Pentium 4 2.6 Mhz processor and added many hardwares and softwares.

Problem 1 is minor: I see "no signal" once or twice during every bootup. It stays to my screen for few seconds. Don't know if it has any bad impact.

Problem 2: System was rebooting all of a sudden after addition of some software & hardware. After I removed my second hard drive( which was FAT32 file system), it became stable. So I reformated my second HDD to NTFS ( like the primary one). After few days the problem reappeared.
This time, I checked for all adawares and virusscan. Also does windows update. Installed Zonelab Security Suit as firewall. Problem was fixed for a while. Recently I didn't added any hardware or software. But the problem reappeared. To find out the reason of failure, I unchecked the box for automated rebooting and I found different error messages everytime.


A problem has been detected and windows had been shut down to prevent damage to your computer.


If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new inst... Read more

A:XP Home - Reboots Automatically Frequently

Read other 7 answers

Not sure if this is a malware issue. Every time I shutdown my laptop (Start -> Turn Off Computer --> Turn Off), it will completely turn off for about 5-10 seconds whereupon it automatically reboots. Details are as follows:

- Have run multiple antivirus and malware removal utilities, all of which indicate no infections.
- Only occurs when using AC power, not battery.
- The "Automatically Restart" option is UNCHECKED (System Properties --> Advanced --> Startup and Recovery).
- The "Wake-up on LAN" setting is disabled in Device Manager and BIOS.
- Occurs with and without the "hibernation" setting enabled under power management.

Any suggestions?
DDS (Ver_09-02-01.01) - NTFSx86
Run by Timothy at 16:35:37.70 on Wed 03/11/2009
Internet Explorer: 7.0.5730.13 BrowserJavaVersion: 1.6.0_11
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.511.78 [GMT -4:00]

AV: Trend Micro Internet Security *On-access scanning enabled* (Updated)
FW: Trend Micro Personal Firewall *enabled*

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\Program Files\Trend Micro\Internet Security\UfSeAgnt.exe
C:\Program Files\Toshiba\Tvs\TvsTray.exe
C:\WINDOWS\system32... Read more

A:Computer Automatically Reboots after Shutdown

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.comDDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructio... Read more

Read other 2 answers

I have Vista Home Premium x32 with SP2 installed running on an Intel motherboard Core2 Quad with 3GB memory and a nvida 8800GT video board and a 400 Watt p/s, 500GB drive with plenty of free space.

My system fan speeds up to full speed and then re-boots. The only warning I get is the fan noise. This happens 5 or 6 times then it won't happen again for a couple days. It seems to happen exactly 1 hour from the last time it rebooted.... no kidding, within a couple seconds of 60 minutes.

Anyway, I thought I would check the event logs for a clue. I noticed that the Shutdown Event Tracker was not available so I looked for a way to turn it on. Vista, at least my version, does not have the gpedit.msc (Group policy console editor?) and other articles indicated that is what I needed to activate the Tracker.

The only thing I can find in the other logs is a recurring entry:

"The DgiVecp service failed to start due to the following error: The system cannot find the device specified."

Can anyone tell me how to enable the Shutdown Event Tracker?

Is it still part of Vista Home Premium?

Anyone care to take a shot at the cause of my reboots?

A:System shutsdown and reboots automatically

Do you have the PC overclocked?...you may be having a thermal shutdown...turn it back to defaults if you do.

Other than that, sounds like you have some bad drivers on your system. Try a system restore to before this whole thing happened...it may help. Also check your BIOS and see if you have the most recent update for that...or even overrite it with the current revision...the stupid chance that got corrupted.

If this doesnt work unplug all of your hardware from inside the pc...clean them...and them reinsert them.

I've had this happen more during startup with constant reboots rather than it just shutting off ramdomly. Personally if its happening regularly im thinking it is a thermal shutdown.

I have no idea how to use the event logs...every time I have tried I cant get it to record my issues.

Hope this helps.

Read other 7 answers

i recently built up a system at home but im getting such a weird message and no one seems to be able to figure it out

the system:
xp pro OS
amd athlon 2.2ghz cpu
jetway v400db motherboard
256 megs ddr 333mhz ram
40 gig ibm hdd
geforce 2 mx400 graphics card
Onboard crystal media 5.1 sound

now every time i exit a game the system reboots itself and i get the error message
"irql not greater or less than"
,i have tested the card and ram with someone elses and its fine.......

then at the bottom it says cmuda.sys and then the code

A:blue screen/automatically reboots

Does this happen when you exit any game, or a specific one?

I don't know if this is the same for XP, but in w2k you get a memory.dmp file in the winnt (windows in XP) folder that contains the information in RAM at the time of the crash. There is also a minidump folder that contains a minidump file by date for each crash (memory.dmp is overwritten each time it crashes). There is a utility in support tools (again w2k for sure) called dumpchk.exe and it can be run against both files to provide an output containing the register contents and a list of what was running at the time of the crash.

The important registers are the Stop code and register #3. The Stop code informs what kind of stop, although you already know that - IRQ not less than or equal. Register 3 tells you the address of the execution that caused the crash. From that address, you need to cross reference the list of files running and their start addresses to find the file that caused the crash. If you have several minidump files and they all point to the same file, you can then figure out how to fix that file (replace with newer version, check MS site for info on that file, etc.).

Read other 1 answers

i have a compaq nx 7010 laptop running windows xp home edition
i recently updated to service pack 3

configuration : intel centrino 1.7 ghz 512 mb ram

of late i have been experiencing problems that as soon as i start my comp and work for a while about 2 or 3 minutes...it gets stuck! and i am forced to manually restart!!
if it doesnt get stuck, it reboots automatically!!!
ocassionally even the blue screen used to pop up...

currently i am only able to work on safe mode with absolutely no problems! i am able to use internet, use all my programs but cant play any audio files as the sound is disabled (as i presume it always is in safe mode)...

i had many anti virus and anti spywares running but nothing was detected...and i have now removed all of them thinking there might have been some clash between those programs...but still the problem remains!!! i even created a new user and deleted the old one...with no avail...

about a year back my comp was infected with lots of malwares and trojans lik winavxxx and others when my control panel and task manager had got disabled and it was only due to help from you guys and timely intervention that i was able to come out of great difficulties!!!

presently,i dont know if there is any virus thats causing this or if my system registry is corrupted or not...

my comp has also become quite slow, including the internet speed

another thing bothering me is the disapperance of "turn off" button from the windows welcome screen

... Read more

A:pl help!! comp keeps getting stuck and automatically reboots!!!

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:25:20 PM, on 11/19/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)
Boot mode: Safe mode with network support

Running processes:
C:\Program Files\iSilo\iSilo\iSilo.exe
C:\Program Files\internet explorer\iexplore.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.google.co.in/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant =
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch =
R1 - HKCU\Software\Microsoft\Internet Explore... Read more

Read other 2 answers

I'm running Windows XP Home w/ sp3. I think I have the same problem reported by octa21 on August 18, 2009. I'm not sure I posted in the correct category, but that's where I found the August post.

Originally machine would load desk top and reboot automatically. While rebooting I would get message: 'msln program not found - skipping autocheck'. I followed advice for the August post:

1) rebooted in safe mode with networking
2) ran Malwarebytes and deleted problems
3) ran Combofix
4) ran speedyPC and fixed problems suggested (this was not suggested in the original post)

If I reboot normally I no longer get the 'msln' message but the auto reboot cycle continues.
There were a number of problems found with the malware scan. Included is the log from Malwarebytes and part of the Combofix log. I exceeded the 30,000 character limit.

Any help would be greatly appreciated!

Malwarebytes' Anti-Malware 1.44
Database version: 3805
Windows 5.1.2600 Service Pack 3 (Safe Mode)
Internet Explorer 7.0.5730.11
2/27/2010 7:40:24 PM
mbam-log-2010-02-27 (19-40-24).txt
Scan type: Quick Scan
Objects scanned: 180786
Time elapsed: 6 minute(s), 33 second(s)
Memory Processes Infected: 0
Memory Modules Infected: 0
Registry Keys Infected: 10
Registry Values Infected: 0
Registry Data Items Infected: 1
Folders Infected: 2
Files Infected: 1
Memory Processes Infected:
(No malicious items detected)
Memory Modules Infected:
(No malicious it... Read more

Read other answers

Hi,after reading most of the posts here my problem is still not solved (having the latest BIOS version 1.38). However, what appeared to be randomly happening I could now repeat. Scenario:X1 is in docking station and under power. I close the lid and the system goes into sleep mode. I have an USB bluetooth mouse connected with the dock. When I move the mouse nothing happens (in the older BIOS version the system came out of sleep mode). When I push the right or left mouse button the system gets out of sleep. When I now open the lid they system is instantly on (new sleep mode). HOWEVER when I do nothing and leave the lid closed the system goes after time again in sleep mode. But when I open the lid (the next day) the system has performed an automatic reboot! I can reproduce that behaviour over night easily but do not know exactly when the reboot has taken place.When the lid is closed and nothing is done to the mouse the system wakes up the other day normally when the lid is opened. Any thoughts? BestFrank

Read other answers

My computer (notebook) with Windows XP SP2 will reboot automatically (crash) after I try to run certain apps. For example when I run Tweaking.com's 'Windows Repair', the program will run through the initial stage but after that the OS will auto reboot every single time. One other app I can't even start before Windows crashes. 
Also, I've ran ESET online scanner, Malwarebytes anti-malware and TDSSKiller and they've all found some serious infections (like trojans and rootkits) which were automatically deleted/quarantined, but the problem still persists.
Thank you.

A:Windows automatically reboots (crashes) when trying to run certain apps

If you're planning to use XP,make sure that's upgraded to SP3+ all updates.

Read other 2 answers


I have a custom built desk top utilizing an ASUS P6X58D premium mobo powered by an i7 938 processor with Intel X58 chipset built April 2011 running Windows7 Home Premium. Have not had any problems with the system until I changed the processor. I swapped the i7 937 for an i7 975. It is a new processor. Before switching processors I upgraded the BIOS to the latest revision. I checked the system thoroughly to make sure everything was operating normally before I exchanged processors. Now when I boot up with the i7 975 processor the system will start the pre-boot post, then automatically reset and will restart the pre-boot post. It may do this 2 or 3 times then will start normally. After boot up everything appears to be running normal without any problems. I am not a gamer nor do I even have the games packaged with Windows 7 installed on my computer nor am I overclocking the processor. I have not changed any BIOS settings as the new processor is recognized by the BIOS.

Any suggestions to remedy this problem will be greatly appreciated.


A:Computer automatically reboots after processor exchange

Hello and welcome apuluo mate try these SFC /SCANNOW Command - System File Checker
Disk Check

then these would not go amiss



http://www.bleepingcomputer.com/download/adwcleaner/download from bleeping computer

A last thought is this RAM - Test with Memtest86+

you need to run this for at least 8 passes unless errors start up straight away it does a LONG time to do and you may need to try different sticks in different slots to weed out the problem one.

Read other 1 answers


I have my XPS 13 9360 at 15 days and when I'm working with battery the computer reboots often without any notice...
Today it rebooted 4 times when I turned off the charger...
Anyone faced similar issue?
Is this a problem in the battery or in Windows 10 drivers?
Thanks for the help.

A:XPS 13 9360 Reboots automatically in Windows 10 when on Battery

Return for a refund.

Read other 1 answers

Hi there,

I've had this problem ever since I got my Compaq Presario S3300NX. Occasionally, during playback of movies on windows media player 10 (and 9), my computer will shutdown (as if the power cord has been pulled) and restart again. I have an NVidia graphics card if that helps any (if you need specifics, i'll need direction as to where to find them). I know for sure that I dont' have any viruses or spyware because I've just reformatted my hard drive.

As I said before, this occurs very infrequently, so its very difficult for me to know if the problem is fixed or not. However, recently (within the past month) its been happening more often (about 2 or 3 times a week).

Thanks in advance for any thoughts on the matter.

A:Windows Media Player Automatically Reboots

The first things I would look for are heat problems and corrupted drivers.

First, make sure your fans are running and clear of dust, especially those in the power supply and the one on the processor. Overheating can cause shutdown problems like this (so can a bad power supply). Overheating can damage your processor as well.


Look in your device manager for any red or yellow warning icons in any of the devices listed, especially the graphics adapter.

Read other 6 answers

Hi, I have Windows XP Home Edition, and I play the game Final Fantasy XI quite often, and recently I've been having a problem, my computer has been automatically restarting. About a week ago it started and everytime this would happen a blue screen would pop up, but nothing would be on the blue screen, it was just blank. I have Norton 2005 SystemWorks and Norton Internet Security 2003, both subscriptions have been updated within the past 2 hours. I also have Adaware, and Spybot Search and Destroy, also which have been updated and run, and found nothing except maybe a few tracking cookies which were easily deleted. Everytime it reboot it says this is the technical Information on why Windows Crashed, if anyone can help I would greatly appreciate it.

Here is the technical information my computer gives me on the problem:

BCCode : d1 BCP1 : 00000000 BCP2 : 00000002 BCP3 : 00000000
BCP4 : 00000000 OSVer : 5_1_2600 SP : 1_0 Product : 768_1


My computer is about 2 years old, still in good condition, I've never had any problems with viruses or anything, but I think this might be a driver problem, maybe my motherboard, I just don't know, i'm not that good with computers, i know enough to get by but I'm stumped on this one. If you need more information than that i can give it to you just reply and ask me for specifics. Also, I've turned off automatically restart with ctrl p... Read more

A:Windows Reboots Automatically - Product : 768_1

does your computer restart and give you this error when you only play final fantasy? or does your compute crash whenever your on the computer?

first thing is to test out your ram for errors. even though your computer is two years old, which is old for a computer since computer technology keeps on getting updated, certain faulty issues could come up.

hmm............go to www.majorgeeks.com and click on the memory section on the left side, then download memtest86. you can put the program either on a floppy disk or cd. then you will need to change the first boot device in the bios to either floppy or cdrom since your gonna be booting to the program.

save settings in the bios, assuming you have the program in the floppy drive or cdrom, the computer will boot to memtest86 and the program will begin testing out your ram for errors.

Read other 1 answers

Good evening all,
I have been battling my only computer and trying to save it. This is our only desktop. My son who has Autism has been using it for disney games, abcmouse.com, and a roadblocs game, google earth,etc.
Started slowing down, had new HDD put in and Win 7 installed by a repair guy. All was well until he started on the web games. I ran Spybot, Malwarebytes,bought Avast Pro, windows defender, etc. I thought I was aggressive in protection. Then the screen freezes, errors,etc. Had some things come up for quarantine and clicked fix selected. Did a restore point for a week earlier, worked for a little while.
So I have been reading about virus/malware/.dll hijacks,etc. I found your forum, and wow lots of good reads. I did the check up, Farbar, security check. Posted below are my logs.
Thanks in advance for any help with this. My son is really upset and I am trying to help the full melt down.
Results of screen317's Security Check version 0.99.89  
 Windows 7 Service Pack 1 x86 (UAC is disabled!)  
 Internet Explorer 11  
``````````````Antivirus/Firewall Check:`````````````` 
 Windows Security Center service is not running! This report may not be accurate! 
 Windows Firewall Enabled!  
Microsoft Security Essentials   
avast! Antivirus                
 Antivirus up to date!   
`````````Anti-malware/Other Utilitie... Read more

A:dll issues/reboots/freezing/virus protection changed/etc/thank you

Hello. Did Malwarebytes find anything?please run thesePlease download MiniToolBox, save it to your desktop and run it.Checkmark the following checkboxes:Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.Note: When using "Reset FF Proxy Settings" option Firefox should be closed.Download TDSSKiller and save it to your desktop.Extract (unzip) its contents to your desktop.Open the TDSSKiller folder and doubleclick on TDSSKiller.exe to run the application, then on Start Scan.If an infected file is detected, the default action will be Cure, click on Continue.If a suspicious file is detected, the default action will be Skip, click on Continue.It may ask you to reboot the computer to complete the process. Click on Reboot Now.If no reboot is require, click on Report. A log file should appear. Please copy and paste the contents of that file here.If a reboot is required, the report can also be found in your root directory (usually C:\ folder) in the form of TDSSKiller_xxxx_log.txt. Please copy and paste the contents of that file here....ADW CleanerPlease download AdwCleaner by Xplode and save to your Desktop.Double-click on AdwCleaner.exe to run the tool.Vista/Windows 7... Read more

Read other 16 answers

Hello! I just purchased a Sony Vaio desktop from a friend and it has a built-in TV Tuner that isn't working. When I boot the system it says "New Hardware Found" and identifies the tuner, but every time I attempt to install the driver it automatically reboots.

I uninstalled the problem driver and downloaded a new one. When I tried to install it again, same problem. It immediately rebooted without warning. The system runs Windows XP SP2. I tried searching online for the answer but I haven't found anything specific to my problem. I've never encountered this before, what should I be looking for?

A:[SOLVED] Driver Installation Fails: Automatically Reboots

Hi Gideon147
Can you please give complete specs of this PC, make, model, Part#, serial # and if possible the type of TV tuner card?

Read other 2 answers

OS- WIN7 (build 7600, all updates from windows update)
System age: 2 weeks old; self build
OS age: 3 days old (but tried 64 bit too)
CPU: AMD Phenom II 965 (HDZ965FBGM)
Video: Tried both Nvidia GT210 and onboard video
MB: Biostar TA790GX A3+
PS: Raidmax 630 watts (RX630Z); also tried Antec Earthwatts 80 (500Watt)

Issue: System reboots on it's own. I have turned off auto system reboot on progam crash, so it seems like it's not a program crash.

I can make the system error happen quickly (less than 1 minute) when I visit http://www.soundblaster.com/worldofw...o/welcome.aspx (it's a flash driven page)

Reboot also happens, but much less frequent when playing COD4 and a few times it happend less than a minute after windows 7 started.

Things to note. The Biostar board can run 1066/1333 DDR3 and 1600 overclocked speeds and I have Patriot 1600 DDR3 RAM. I've tried running the ram at all 3 speeds, but issue remains.

CPU temp gets to about 42 deg. C as noted in the BIOS

Latest BIOS and drivers installed.

I've tried two power supplies 630 Watt Raidmax and 500 watt Antec.

I've tried using only onboard video (uninstalled the Nvidia GT210, not just took it out of the MB). When I used the Nvidia card I made sure onboard video was off in the BIOS.

I tried 64bit Win7 Ultimate and 32 bit, but both have same issue.

Took the system to Frys Electronics and worked with an A+ certified tech for 30 min. . He set the CPU/RAM to automatically change ... Read more

A:Kernel power error 41 system reboots automatically

No evidence of BSOD's - so this is most likely a hardware issue (IMO)

Try this:
Open the case (don't go inside the case!) and run the system until it crashes.
Unplug the system from the wall, grab hold of a piece of metal on the case with one hand.
With the other hand CAREFULLY poke around inside the case. Check the video card, CPU, northbridge, southbridge, and RAM (at a minimum). If you find anything that's likely to burn your finger, make a note of that.

Beyond that, I see lot's of errors for a udom and udom_microdom.cpp
They seem related to this - but I have no clue what it is: http://www.w3.org/TR/SVGMobile12/svgudom.html

Read other 5 answers

My laptop (Windows 7) reboots automatically as soon its connected to internet (both wireless and LAN). If its not connected to internet its stays fine.
Restart is within a minute from the time its connected to internet.
I tried disabling task scheduler, full system scan and it did not help.

Any suggestions please??

Thank You..

A:windows 7 system reboots automatically only when connected to internet

Is it just a random shutdown, no warnings? Also, is it a "regular" shutdown cycle? Where it simply follows the steps, shows the "shutting down" splash screen?

Read other 1 answers

Hi guys.By the way, I'd like to say I'm a greenhorn so do guide me along the way Here's the 1st..Okay, basically I was surfing using firefox, listenin to songs when all of a sudden, the pc rebooted (i had unclicked the "AUTOMATICALLY REBOOT" at STARTUP & RECOVERY.It was a blue screen so auto reboot.I made a check at the event viewer for any dump file and there was one called "Mini113008-01.dmp".Analyzed it using debugwiz and below are the results from the analysis.******************************************************************************** ** Bugcheck Analysis ** ********************************************************************************Use !analyze -v to get detailed debugging information.BugCheck 1000007F, {8, 80042000, 0, 0}Probably caused by : ntkrnlmp.exe ( nt!NtSetTimer+242 )Followup: MachineOwner---------0: kd> !analyze -v;r;kv;lmtn;.logclose;q******************************************************************************** ** Bugcheck Analysis ** ****************************************************... Read more

A:Windows XP reboots all of a sudden even when the "AUTOMATICALLY REBOOT" was unclicked

Worthy of reading: http://www.windowsbbs.com/windows-xp/36179...ts-bsods-2.htmlMy guess would be that it's hardware.I would start by eliminating suspects like the power supply, the RAM, the hard drive.Louis

Read other 2 answers

hi i wonder if someone can help the last few days my pc has been running very slow and browsers freeze for no reason and i can not see messages in YM messenger window yet msn messenger runs fine i have scanned pc with hijack this and here ids the log i am using vista home with sp2 Logfile of Trend Micro HijackThis v2.0.4Scan saved at 16:38:08, on 29/08/2010Platform: Windows Vista SP2 (WinNT 6.00.1906)MSIE: Internet Explorer v8.00 (8.00.6001.18943)Boot mode: NormalRunning processes:C:\Program Files\Norton Internet Security\Engine\\ccSvcHst.exeC:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Windows\RtHDVCpl.exeC:\Acer\Empowering Technology\SysMonitor.exeC:\Acer\Empowering Technology\eDataSecurity\x86\eDSLoader.exeC:\Windows\System32\nvraidservice.exeC:\Windows\vsnp2uvc.exeC:\Program Files\Yahoo!\Search Protection\SearchProtection.exeC:\Program Files\Common Files\Java\Java Update\jusched.exeC:\Program Files\Windows Live\Messenger\msnmsgr.exeC:\Program Files\Spybot - Search & Destroy\TeaTimer.exeC:\Program Files\WinZip\WZQKPICK.EXEC:\Program Files\TypeItIn\TYPEITIN.EXEC:\Windows\system32\wbem\unsecapp.exeC:\Program Files\Windows Live\Contacts\wlcomm.exe... Read more

A:progs not working or stalling windows reboots automatically

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below I will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the ... Read more

Read other answers

My daughter's desktop is shutting down and rebooting sometimes every 90 seconds.

I realised she hadn't updated AVAST, but it wouldn't accept a reinstall, so I removed it and loaded Avira. I have run that without any virus detection.

It seems to be rebooting slightly less, but still occurs.

Please can someone assist with an analysis of the attachment as I don't know what to do next. She is home-schooled and using software on this PC.

Many thanks

 20110323 hijackthis.txt   7.94KB

A:Hijackthis analysis: Windows XP shutdown and reboots automatically

Hello and welcome to the forums!My secret agent name on the forums is SweetTech (you can call me ST for short), it's a pleasure to meet you. I am very sorry for the delay in responding, but as you can see we are at the moment being flooded with logs which, when paired with the never-ending shortage of helpers, resulted in the delayed responding to your thread.I would be glad to take a look at your log and help you with solving any malware problems.If you have since resolved the issues you were originally experiencing, or have received help elsewhere, please inform me so that this topic can be closed. If you have not, please adhere to the guidelines below and then follow instructions as outlined further below:Logs from malware removal programs (OTL is one of them) can take some time to analyze. I need you to be patient while I analyze any logs you post. Please remember, I am a volunteer, and I do have a life outside of these forums.
Please make sure to carefully read any instruction that I give you. Attention to detail is important! Since I cannot see or directly interact with your computer I am dependent on you to "be my eyes" and provide as much information as you can regarding the current state of your computer.
If you're not sure, or if something unexpected happens, do NOT continue! Stop and ask!
In Windows Vista and Windows 7, all tools need to be started by right clicking and selecting Run as Administrator!
Do not d... Read more

Read other 7 answers

I'm using Windows 7 on C drive and Windows xp on D drive. Drives are separate. I recently changed the mobo. Now for no reason the computer will stop and show me a BSDO with a message about a memory dump error and show me a count down at the bottom of the page and reboot. Maybe event viewer would be able to show more information about the crashes but I don't know how to access it.

Is there any thing I can do. MY PC specs are
Drive C: W7 Home Premium 32bit 250GB Seagate NTFS (Sata2)
Drive D: WinXP Pro sp2 32bit 100GB NTFS Hitachi (Sata2)
Drive E : Storage 220gb (ISata2) -2nd half of Drive D
Drive F, G and H DVDRWs F and G are Sata2 H is IDE

Seagate 400GB Sata2 Storage with 2 Partitions
Seagate 400GB Sata 2 Storage with 2 Partitions
Seagate 400gb IDE Storage with 2 Partitions
Phenom II 5500 (3.2ghz) CPU
4GB DDR3 Ram
Nvidia 9500GT PCIE 1GB video card
Onboard sound card
Foxconn A76ML-K 3.0 Mobo
Earthlink DSL 6000bps
Ext.Floppy drive, 56K dialup, Optical Mouse, Keyboard, 19inch Sq Scr DVI Monitor, Bitdefender AV, USB Floppy and dialup modem, Nero9, Word and Excel 2K, Acronis 15 backup, Belarc Advisor, Winrar, Hijack This, DVD Shrink, Maleware Bites, Firefox and IE, Win Regitry Repair, DVD Fab, Format Factory, Jet AV, Norton Ghost 15, MS Works 4.5, Winzip

A:Solved: Computer Automatically reboots. BSOD for no reason

Read other 9 answers

Attached is a hijackthis log, and the dds log. I received an error from the dds program regarding sort utility "encountered a problem and needs to close," I'm not sure I can provide the attach file. Also here is a description of my problem.A quick summary of the problems and the cause. After installing and then actually running a camtasia video recording program, the computer has been stuck with excessive memory use, iexplore.exe running on its own, the "next" button on system restore blocked, spybot and other programs such as malware bytes and hijack this simply not starting/loading beyond a set amount of memory (usually around 2300 kb, however I got around this by renaming the files from spybotsd.exe to spybotsd.bat and the programs then worked fine), random reboots upon a few minutes of start or immediately after choosing an account at the win login screen, and finally, sometimes I hear iexplore running in the background (with clicks or actual audio from a webpage) however I can not see it running beyond the iexplore.exe listing in the task manager.iexplore.exe seems to run at startup, and even if i close it, it may open itself again.also system is using a lot of memory (up to 60,000 kb) which seems wrong.I have run AVG, Spybot, Mal-ware Bytes, Trend Micro's online scanner, and now I am here with a hijack this log. I have found many problems with the virus scanners, however even after fixing the problems the computer is essentially unchanged from wh... Read more

A:Advanced malware, reboots automatically, programs blocked

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers

Hi everyone
Months ago I did have this issue, but after the latest TB15, Thunderbolt and other driver updates, the issue disappeared. However, for the last month I’ve had to disconnect or connect to a power source, before I put the computer to sleep, if I know the next place I wake it up again will be different from the current. I've disabled hybernation.
Every driver and BIOS is up-to-date but Dell Command 2.2.0 keeps notifying about the Intel(R) Thunderbolt(TM) 3 Firmware Update (532,3 kB, 01-07-2016).
When it installs it, it does it  with success but, it reappears at the next check. However when I download the driver manually, it says it’s already up-to-date.
My specifications are:Dell Precision 5510Xeon E3-1505M, 32GB ram, 4K, M.2 512GBService Tag: <ADMIN NOTE: Service tag removed per privacy policy>Windows 10 64bit Pro build 10586.545
I don't think it would help me to start from step 1 again, as everything is up-to-date
Event Viewer shos:EventID 6008 shows unexpected shutdown (from the time I closed the lid) - but no errors or warning from that time. Seems it executes the error, when I power on the system. EventID 41; System restart without proper shutdown EventID219; "The driver \Driver\WUDFRd failed to load for the device ACPI\INT3400\2&daba3ff&2.
I really hope somehone has a solution, as this really takes the joy out of the product.

Read other answers

I have a desktop running on Vista OS, and the main problem I have with it is that it reboots automatically without warning. It is not like a shutdown, but like someone flipped the power off and then it starts back up automatically. I am not sure if this is a hardware problem, because I also have error messages pop up "catalyst control centre cannot start" and I also cannot connect to the internet. I am connected but with "Limited Connectivity" so essentially I am unable to do anything.

Advice would be deeply appreciated.


Here are the DDS Logs:

DDS (Ver_2012-11-20.01) - NTFS_x86
Internet Explorer: 9.0.8112.16421 BrowserJavaVersion: 1.6.0_24
Run by Templin at 18:23:53 on 2012-12-10
#Option MBR scan is disabled.
Microsoft? Windows Vista? Home Premium 6.0.6002.2.1252.1.1033.18.3069.2108 [GMT -6:00]
AV: Lavasoft Ad-Watch Live! Anti-Virus *Disabled/Updated* {9FF26384-70D4-CE6B-3ECB-E759A6A40116}
SP: Windows Defender *Disabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Lavasoft Ad-Watch Live! *Disabled/Updated* {24938260-56EE-C1E5-047B-DC2BDD234BAB}
============== Running Processes ================
C:�... Read more

A:PC won't connect to internet, error messages, reboots automatically withouth warning

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. Click the Watch This Topic button at the top on the right.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

Read other 2 answers


Recieved this error
STOP : 0x0000000A
0xFEFD7000, 0x00000002, 0x00000000, 0x804FA497

Memory tested fine with mem86...

Im suspecting a defective Video Card?

What do you guys suggest? It wont even stay booted long enough so i can access event viewer or so

A:Solved: Computer Reboots Automatically, Seen A STOP 0x0000000A Blue Screen....

Read other 9 answers

My W540 has Nvidia KM2100 graphics card. I have a dock, so, to enable Nvidia KM2100 for external monitors connected to the dock, I changed Video Settings in BIOS from "Standard" to "Advanced".  Then, strange thing start to happen. When close the lid, laptop goes to sleep. When I open the lid, laptop wakes up and I can use it for roughly 2 seconds before screen suddenly goes blank and it automatically reboots. There is no BSOD or crash dump. It just reboots. This happens every time I close and open the lid. Basically, I can't use "sleep" feature. This is very annoying. The OS is Windows 10 Creator Update with the latest graphics drivers for both Intel HD4600 and Nividia KM2100. As soon as I revert Video Settings in BIOS from "Advanced" to "Starndard", which sadly disables Nvidia graphics card for external monitors, this strange behavior goes away. Any solutions?  Thanks in advance.

Read other answers

I have an infected Dell laptop running Windows XP Pro SP3. On startup, it displays a System Shutdown pop-up with a one-minute timer and the message, "The system process C:\Windows\system32\services.exe terminated unexpectedly with status code -1073741482. The system will now shut down and restart."

When I booted it into Safe Mode, I found AVCare (which I removed). Spybot S&D also caught Monopod attempting to set a startup item in the registry (which I blocked). There's more garbage on the system, because it still reboots itself.

I booted it again into Safe Mode (logged in as Administrator) and tried installing SDFix and MBAM from a flash drive. I was able to install both of them, but they both crash when I run them. SDFix crashes right after I type "Y" to start the scan, and crashes explorer.exe along with it. I was able to start MBAM after installing, but it crashed as soon as I clicked "Start Scan", and I when I try to run it again I get the message, "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item."

Any help would be very much appreciated.

More information as of 9:30 PM:

HijackThis also will not run. Firefox and IE7 are both get redirected away from anti-virus and anti-spyware sites (like Trend Micro House Call). In some cases the browsers crash. I installed Google Chrome to try to get a clean browser, and it won't bring up a... Read more

A:Infected laptop reboots automatically on startup; MBAM and SDFix crash in Safe Mode

As no logs have been posted, I am shifting this topic from the specialized HiJack This forum to the Am I Infected forum.==>PLEASE DO NOT NOW POST LOGS<== unless a log is specifically requested.

Read other 1 answers

I have a client that has this problem. I found this forum through Google and this post (http://forums.techguy.org/archive/index.php/t-270719.html) seems very similar but no good answers.
Doing F8 I turned off auto restart and got the B.S.O.D. stop c000135 telling me it was unable to locate winsrv.

After getting the stop error I found http://support.microsoft.com/?kbid=885523 and thought I'd pass it along. It's different than the UMAX scanner KB article.

Going to try to recover now. Wish me luck.

A:XP reboots continuously reboots after SP2

Read other 7 answers

I recently wiped my hdd and reinstalled 2kpro. It installed with no problems. I then installed my ati drivers, no problems. Then my cdcreator 5 platinum - again, no problems. Then I installed my sblive software. After I had installed it, I saw that there was another cd that indicated it was for windows 2000. I ran the setup on that and it uninstalled the "older version of the software" and installed itself. When it was done, the computer went through the usual restart stuff, got past the black screen, went to the windows 2000pro screen, the status bar went to the end, then instead of opening to my desktop, the computer flashes a blue screen without a message and restarts again. It continues to do this. AAAARRRRRGGGGGGG....... Help?????? Rod.

A:win2kpro starts, reboots, starts, reboots...

Read other 8 answers

I let my computer install windows updates over the night as I shut it down, and after starting it up this morning, I can no longer run .exe files. Upon trying to run a .exe file, a window pops up stating "The filename, directory name, or volume label syntax is incorrect." It's never done this before, so I googled it and read it could be some sort of trojan that has changed registry values but I have no idea what it truly is.

A:Am I infected? Registry Values changed?

 Try booting to Safe Mode with networking.  If you can, try installing Malwarebytes and doing a scan.  If Malwarebytes doesn't fix it, you could try System Restore back to an earlier date.
Good luck.

Read other 1 answers