Over 1 million tech questions and answers.

microsft bluetooth intellimouse

Q: microsft bluetooth intellimouse

I Tried to set up my microsft bluetooth intellimouse and It works on and off.
I get a system event notice :Event Source: BTHUSB
Windows cannot store Bluetooth link keys on the local transceiver because it cannot determine whether proper security is enabled for the device.

and this one: Event Source: HidBth
Bluetooth HID device (00:50:f2:7f:f3:82) either went out of range or became unresponsive.

when I go to Help and Support Center at go.microsoft dot com they say they have no information on this

Thanx for any help

xp pro sp2 all updates, zone alarm pro,asus m/b p4c800 deluxe, p4 3.0, no other bluetooth devices

Preferred Solution: microsft bluetooth intellimouse

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: microsft bluetooth intellimouse

Some bluetooth problems seem to be post SP2. This is a general bluetooth troubleshooter from Microsoft


Read other 2 answers

I am using a Dell Dimension E510 that I upgraded to 3 Gb of memory and then upgraded from XP Media Center to Vista Home Premium. I'm having a problem with my wireless mouse. I purchased and used (without a problem on XP) a Microsoft Elite Bluetooth keyboard and mouse. Since I upgraded to Vista, I have been having problems with the mouse. When I opened an internet page, the second I moved the cursor out of the toolbar and into the page, the page would begin jumping and flickering up and down. Twice now I've deleted the mouse & keyboard problem and re-installed them, and they seem to work for a while. I finally figured out yesterday that this occurred after I ran that IOBIT Windows Cleaner free program so I deleted that program, deleted the Microsoft bluetooth program and then re-installed the Intellitype and Intellimouse programs (6.1) and everything seemed to be working well. This morning, I can't get the mouse to work at all. The system reads the keyboard OK (I'm typing on it right now) and it tells me that the mouse batteries are good so I believe that it sees the mouse, but the cursor will not move with the mouse. Can anyone help me with this?


A:Microsoft Intellimouse for Bluetooth Problem

Try updating the mouse driver.

Read other 3 answers

ok. this guy gave me this mouse. with no driver or no software. he said i needed the driver. so i plugged it in. its a usb mouse and the full name on the bottom is IntelliMouse Explorer USB and PS/2 Compatible 5V 100mA. So i went to microsoft downloaded the whole intellimouse driver. selected what the mouse was. and i restarted. then i load back up and it doesnt work. i unistalled it and let the computer recognise it and reinstall it and it did that but still didnt work. and the messages come up that is malfunctioning. Any help? Thanks

A:Intellimouse help

Read other 9 answers

I installed a MSIntellimouse but it doesn't work properly.
I have a IBM 560X portable with a trackpoint internal mouse.
is there a conflict here? Do I have to deactivate it for the Intellimouse to work? How do I do this?
Many thanks for your hep
Yuri gagarin


Hi yuri gagarin, welcome to TSG....

What operating system are you running and have you made sure you have the correct and newest drivers?

I believe I've read somewhere that ME and that mouse are unhappy, depending on which model you have.

Read other 1 answers

I just installed Windows ME and my mouse pointer is now transparent.


Have you tried using a different pointer?

Select Start, Settings, Control Panel, Mouse, and the Pointer tab. Try some of the option and see what happens.

Dan-O - MSCE

Read other 2 answers

I really need your expert valuable help.
All of a sudden, my MS Intellemouse (wireless) does not scroll smoothly. It jumps in a jerky motion when scrolling. Have changed the batteries.
In the Control Panel; Display Settings are set at 1024X768. The mouse is set for slow scroll (have tried faster settings) the Enable accelerated scrolling and Vertical scrolling are both checked.
Am running XP Pro with plenty of RAM.
[email protected]

Read other answers

Hi there, just built new computer and im having some issues.
everything is fine untill i start playin a game(WoW) and comp shuts down,

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.
Locale ID: 1033
Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8007E6B028
BCP3: 00000000BE000000
BCP4: 0000000002000102
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:

A:Microsft BC Code 124

these are the minudump files

Read other 1 answers

What is Microsoft number?

Read other answers

I can't access microsoft, windows update or any microsoft websites

A:Microsft sites

Try the Microsoft FixIt: 0x80080008 error message when you try to install updates by using Windows Update or Microsoft Update

Read other 2 answers

Buffer overrun detected!
A buffer overrun has been detected which has corrupted the program's internal state. The program cannot safely continue execution and must now be terminated.
What does this mean?
I recently have been infected with a Smitcore virus and downloaded Smithfix to get rid of it, then it happened after I ran the program... I'm not quite sure how to uninstall Smitfix to check if thats the problem...
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:47:22 PM, on 7/16/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Common Files\New Boundary\PrismXL\PRISMXL.SYS
C:\Program Files\QuickTime\QTTask.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\WINDOWS\system32\wscn... Read more

A:Microsft Visual C++

Hi there,

It looks like you're infected. I have reported this thread and asked for it to be moved to the security forum.

Read other 3 answers

Can anyone help me with a annoying problem, each time I close ms word out I get the message "The file Normal already exist. Do you want to replace the existing file.", the only way I can close ms word out is save the file.
I have tried deleting the file with no success.
Please help this is driving me crazy!


A:Microsft Word

Hey Ed I have read a few instances where Norton Anti virus has intercepted files to do a virus check and has not surrendered the document to Word. Do you have norton installed?Also, i have a few normal.dot's on my computer - are you trying to delete the right one? The one you want to remove should be loacted in:C:\Documents and Settings\yourusername\Application Data\Microsoft\TemplatesYou normally won't be able to see this folder, so you will have to show hidden file:http://www.bleepingcomputer.com/forums/t/43032/how-to-show-hidden-files-in-xp/Let me know if any of that works - i'm sure others will chip in with thier comments.David

Read other 2 answers

I am trying to add new contacts to existing files of contacts. I have tried entering new data from that paticular file a.It will not allow me to save all the data. I can add the persons name and email to the pop up box but not the company name. Trhen regardless does not save the info in that file.What am I doing wrong.

We just transfered our files from Hotmail to Outlook.

Read other answers

Hello, I have two questions. [1] I transcribe old historical documents for a University archive. After I transcribe them into Microsoft Word documents, the originals are archived. The project began about eight years ago when my computer had Windows 3.1. Then I upgraded to Windows 98 and lately toWindows XP Professional. With 98, I had Microsoft Office 2000. With XP, I have Microsoft Office 2000 Professional. I cannot remember the Microsoft Word system I had with Windows 3.1. To date, 8000+ Word docs are on my local 'C' disc in my computer. However, something happens with XP which did not happen with 98, and it is a time wasting irritation. I must open documents to cross-reference information. When I open one which was created when I had 3.1, or 98, and alter it and save the alteration, an orange coloured box flashes on my task bar. I click the flashing box and sometimes nothing happens. I click to close the document and a window appears with this script ' whatsit.doc is a Word 6.0 or 95 for Windows document. Do you want to update it to the latest Word format? To overwrite click Yes. To save in current format click No'. I reckon that I have already updated forty or fifty, the rest are waiting their turn to flash the orange box. But I will not have to open all of them for the cross-reference of information, so I will always have a mixture of updated and non-updated documents. Is there a way that I can update all of my Word documents, en masse, with one or... Read more

A:XP and Microsft Word

Hello oldsoldier and to BC.

The second question I can answer for you but not the first.

Go to your control panel, in the top of your screen, left hand side, you will see File, Edit, View, Go etc.

Click on view and then "Details".

This will change your icons to a detailed view.

Now we have to set this view as the default setting so it will stay like this when you open a window up again.

In control panel again, look this time for "tools" this is the second last one, next to "help".
ok, follow this.......Tools / folder options / then click on the "View" tab and in folder views, click on the "apply to all folders" button. Then click on "Apply" at the bottom of this box and then OK.

Thats it, now, whenever you open a window you will have your details view back again.


Read other 4 answers

I have tried repeatedly to set up my microsoft outlook account without success. I have followed each step but still cannot send/receive messages. I am not understanding could someone please help me I am in need especially to send messages.

A:Microsft Outlook

Hi agilmore, and welcome to TSG.

I would probably help us to help you if you told us exactly what version of Outlook you are using and what e-mail service provider you wish to connect with using Outlook.

Read other 3 answers

Can anybody please help me !!

I have just purchase a new hp pda with windows mobile 5.

I have a database in MS Access 2000 which i would like to be able to use on my PDA to enter data and results when i am going around on site instead of luggin my laptop.

Is there a way this can be done, i want to be able to get home at night any syncronise the two and use my laptop to print of my reports etc. Can in install Access from my office cd directly on to my palm pilot will this work

what do you suggest is the a program i need to use to convert my data base so it can be used on my handheld ??


Read other answers

i often leave my pc on a couple of hours and turn the monitor off.
it has happened twice now that when i come back my intellimouse optical only operates when i put high pressure on it its also very rogh, dodgy, laggy whatever. one of the more weird glitches ive seen :P
anyone got an idea?

it also happens sometimes that my keyboard light (saitek eclipse 2) turns off and on again...

A:weird intellimouse bug

any ideas?

Read other 4 answers

I have a major problem with my Intellimouse. When the computer is on, the mouse will work normally SOMETIMES, but most of the time it just jumps around and clicks on everything that's on screen!
I went to Microsoft.com, and I couldn't get through to them. Some help they were. The mouse causes the computer to freeze up sometimes, and that never happens on my computer. I don't know what to do. I've been getting so mad over this I was thinking I would just buy another mouse. Anyways, here's the written stuff on the bottom of the mouse:
Intellimouse w\IntelliEye 1.0
USB and PS/2 Compatible

Its a intellimouse with a laser thingy in it. I havent been able to use it at all in the last two days and since then I've been navigating my computer with my keyboard.

A:Intellimouse w/IntelliEye 1.0

how have you connected it? usb or ps/2?
and ...this may seem dumb but...........did you load the drivers from the disk provided?

Read other 3 answers

My mouse has recently become erratic and occasionally locks completely needing a restart. I would like to install (?reinstall) driver software but I alway find myself at this Microsoft site -


Unfortunately, although I can click the down arrows next to the first three questions the fourth doesn't produce any options and the 'Go' button doesn't work.

Can anyone advise an alternative Intellimouse download site please?


Read other answers

I can't use my middle mouse button when playing games.I have up to date drivers version 5.any ideas

A:intellimouse explorer

If you mouse is working fine in windows (ie the middle button) then its a matter of configuring it in the relevant games. I.e. in something like Unreal tournament go into the options and assign a key command to the middle button.

Read other 1 answers

I have tried to install an intellimouse wireless explorer ouse. does not work, reinstalled, touchpad still works, tried restore, reinstall intellipoint etc. nothing frustrated with unanswered forumss...usb conflict? updated windows etc. all latest drivers listed as correct, what is up?

A:intellimouse not working

Does the computer seem to recognize the fact that the hardware is installed? If so, have you used the CONNECT button on the receiver AND the mouse? Have you checked the batteries?

Read other 1 answers

Mouse is 5-6 years old: "erratic movements"

This USB mouse runs off a 4-port BUS-powered USB Hub. Within the last week or so, the mouse jumps around erratically. I've tried it attached directly to my Sony notebook's USB with the same effect, so it does not seem to be the problem--though I am considering getting a hub with external power.

Any idea? I've got a new Logitech G3 ordered, so I can say goodbye to it if I have to...

A:Microsoft IntelliMouse

Read other 12 answers

I'm using a microsoft intellimouse wireless explorer and it's driving me crazy. Everytime I pause to so something (like type this for example) the sensor light turns off and when I go to use it again it's dead. I think that's it's to save battery power but it's ridiculous because I have to lift it up, or wave it around to get it going again. It's really been frustrating but I don't want to give up on it yet b/c it was pricey. I'm connected by USB and I've followed all the normal troubleshooting ideas, my PC is clean too, so I'm wondering if anyone else has tried this mouse and what they've dealt with. Thanks.

A:Intellimouse Bites.

Read other 8 answers

I have a MS Intellimouse 1.2A PS/2 mouse that was returned to me because it did not work. I gave the guy another one, and I just threw this one to the side and thought that he didn't know what he was doing. So, I plugged it in today to see if it worked. Nothing happens. The PC I tested it on was using a generic PS/2 mouse and I turned off the PC and then plugged this one in and then turned it on. It booted fine and then came up with no mouse. I've never heard of a mouse going bad - has anyone else? It's less than a year old. Hardly any wear on it too. I was thinking of opening it up, but I guess I should just send it back and get another one. Can a mouse just decide to die one day? And... the PC that it died on is now using the same exact model and it's working fine. So, it's been tested on two machines and dead on both. Any suggestions? Or did this mouse just have a short life?



A:MS Intellimouse - Dead?

Just threw out my old Logitech for the same reason.. Too many games of Tribes

Read other 2 answers

Ok I have a Intellimouse w/intellieye 1.0 that is ps/2 and usb compatible. Now, the download section at microsoft.com just has one for Intellimouse. Nothing else. It says 'Download Intellimouse Software Version 4.1' Or something. If I download and install this, will there be a way, without the original disk that came with the mouse itself, to restore the original mouse drivers? I guess what I'm asking is would there be any adverse effects to any games or programs?

A:Intellimouse Drivers

Please keep replying to your original. This is closed as a duplicate post.

Read other 1 answers

I was recently the victim of a virus, and thought I had managed to restore everything, but when I am in Word and I try to format a picture (eg wrapping style), I get a message telling me "the server application, source file, or item cannot be found. Make sure the application is properly installed, and that it has not been deleted, move or renamed". Is there any way to restore Word back to normal.

A:Microsft Word 2003

2 KB articles on thishttp://support.microsoft.com/kb/290942http://support.microsoft.com/kb/224034

Read other 1 answers

i opened a known website and now seem to have a virus - cant go beyond it in microsft exchange browser.  help?

Read other answers

How do i stop the microsft office trial pop-ups from running? I don't want to buy it right now and the pop-ups are making it impossible to work in the older version of office

Read other answers

I cannot open Microsoft Works word processor. It just keeps telling me that the program is unresponsive. It's only not working on my user account- my husband's is fine.

Can anyone help? Thanks!

A:I can't open Microsft word

Try cleaning up your hard drive:

Or deleting your normal.dot, which could be corrupt:

Read other 2 answers

I have been using Microsoft Money 2004 for the past 9 years without any problems. Today, Microsoft Money suddenly closed and when I tried to open it with the password I just received an error report, this happens every time I try to open the programme and I cannot access my fionancial data. I know MS no longer provide support. Can anyone help please?

A:Cannot open Microsft Money

Read other 12 answers

Greasemonkey fix is releasedBy Brian Livingstonhttp://windowssecrets.com/comp/050630/#story1The developers of Greasemonkey, a popular "extension" for the Firefox browser and other Mozilla Foundation software, released on July 30 a new version that corrects a serious security flaw. I warned about this risk in a brief news update on July 21, 2005.The add-in enables users to redefine how Web sites look and behave. Unfortunately, older Greasemonkey versions, such as 0.3.4, allow hacker sites to read the names and contents of any files on users' hard disks.According to Aaron Boodman, one of Greasemonkey's developers, the new beta version 0.5 closes the worst security holes. Other developers who've looked at the new code agree. Some glitches exist with the beta release, however. Although 0.5 makes it difficult for a rogue Web site to read the source code of a Greasemonkey script, it's not impossible, the team says.Boodman recommends that people who don't want to watch out for these gotchas use version 0.3.5 of Greasemonkey instead. That version was released on July 19 and also eliminates the security flaws.Read the entire article for more information.GreasemonkeyGreaseblog

Read other answers

I have entered all my bank statements into MSMoney, How do I get an annual print out with them divided into various catogeries i.e. motoring expenditure, household expenditure,fuel bills,postage etc? I'm using WinXP

A:Solved: Microsft Money

It's a while since I had Money installed. You have to go into Reports -- it's either on a menu or a link/dropdown. There are some basic pre-defined ones, pick one that looks close to what you need, then adjust the options (group by, etc.) as required.

Read other 3 answers

Note: XPS laptop computer running Windows 10

Tried to update drivers, et cetera, using Dells auto search tech support software. After I did so, I could no longer get on the internet via Wi-Fi. Other than getting on Wi-Fi, laptop is working.

When I attempted to troubleshoot problem using Windows network troubleshooter, I received the following error message: "Your computer appears to be correctly configured but the device or resource (www.microsoft.com) is not responding."

Having received the above error message, I did a network reset.

Identical problem still exists. Any help given will be appreciated.

Read other answers

Hey everytime i download .net framework 2.0 it says i need to have Microsft windows installer 3.0 and i download that and it still gives me that error. Whats wrong is there a specil site to get it from to make it work? Because i got it off of microsft.com.. But please someone help me..

A:.net Microsft windows installer 3.0

Here a pic of my problem. When i download the thing it needs i still get that message

Read other 1 answers

Error codeox8004ffo7. Can't install. Tried the basic things.

A:Microsft security essentials

Hi, and welcome to TSF.

What antivirus program were you using before ?

Read other 2 answers

It takes forever to get a print dialog box when I click on the printer icon in Microsoft Word 98 for Macintosh. I do not have this delay from other applications. My printer is an Epson 740S. Has anyone had any experience with this problem? Marty

Read other answers

I have a samsung laptop running on Windows 7 - I have had this laptop since 01st September 2012. It has recently (over last 4-6 weeks) started showing the following message:

Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.

Object reference not set to an instance of an object.

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at AVUS.Form1.CheckUpdates()
at AVUS.Form1.Form1_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
Assembly Version:
Win32 Version: 2.0.50727.5466 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
---------... Read more

Read other answers

Hi, I am unable to upload a picture in my 2010 Ford Edge with Microsoft Sync. I have put the picture on a cd and get a read of unsupported or bad disc. I have tried a CD and a DVD but with no success. I use a brand new Lenovo with Vista to load the CD.
Any ideas? I am under file size recommendations as well.

Read other answers

I cant use any download I have because it says check internet connection. also enternet explorer doesn't work either. google and firefox wont download cause their is internet problem. I don't have internet problems on my phone and I'm currently posting this from my laptop that is having this issue. I would love to hear back on how I can fix this. I'm also currently running win 10 and the computer is a Toshiba satellite. This problem has been accruing a month after I had completely wiped my computer.

Read other answers

The laptop does not respond to the MS password. It is brand new and I set it up about a month ago but of afraid to use it since.I have followed the MS instructions to reset the PW  but Iafter several minutes I cannot get any further than the pretty picture on the screen .any advice would be most appreciated 

Read other answers

Thanks in advance for any help! My logitech corded laser mouse has bad contact points, so I got a corded Microsoft Intellimouse to replace it. The problem is that when I try to install the drivers, it fully removes the logitech mouse, leaving me without a mouse at all. If I don't let it remove the logitech mouse, it won't install the drivers-catch 22. After that, it would not let me reinstall any mouse at all and I had to use system restore. The very first screen on the microsoft drivers is the agreement and I cannot mark that I agree if I don't have a mouse. If I could find a way to mark that, I'm sure I could use arrows, tabs and enter to complete setup, but tab just defaults to cancel setup and enter does not work because it won't fully highlight. The intellimouse isn't found by the computer after turning off and plugging it in either-tried that. I thought that, since my operating system (XP) is made by microsoft, the drivers might already be in there. No such luck. The instructions say the drivers must be installed first and I would like to do that, but I am stopped every time. I have tried reinstalling my dinosaur roller ball mouse that came with my system and it won't do that either.

A:Solved: Cannot install my new intellimouse

Read other 9 answers

I spent $50 on a Microsoft Intellimouse Explorer because I wanted to go optical, and I wanted lots of buttons for gaming. After working fine for a good 6 months, about 2 months ago I started noticing my mouse would just stop responding. Even during a game. The red light on the mouse would even go out indicating a loss of power. After returning to Windows the problem would often fix itself. I would see a little USB icon with a comment that the device was having a problem. But I couldn't click on it, so I would have to start opening up the Control Panel. Before I could ever get the Device Manager open to look at this, the problem would fix itself. This is a USB mouse, so I tried a different USB port, but the problem persisted. Driver uninstall/reinstall... didn't work either.

I had just installed Windows on a fresh partition in this machine, so I didn't think it was a driver problem. The only driver EVER installed on this WindowsXP install was the most current version. I was starting to think there was just some USB problem on this motherboard.

In any case, I switched to my old PS2 mouse and focused on another project. Building a brand new machine. When I was done with the new machine, I plugged in the MS Mouse. It worked great, so I figured it must have been the other computer.

The other night, it started happening on my brand new computer. So, I looked on Microsoft's website to figure out how I could send this crappy thing to them for repair or replace... Read more

A:Intellimouse Explorer problems...

Read other 12 answers

A friend gave me a Microsoft Intellimouse Explorer yesterday, so I plugged it into my systems USB port, the light came on (see pic) but I can't move the cursor I can click, and use the wheel but that's it.
I've tried all sorts of things, at the moment I have my old mouse (cordless, PS/2) & the USB Intellimouse both plugged in, the cordless works fine, but as I said I can click with the other.
some of the things I have tried:
-Deleting the cordless mouse, and starting the system up with only the Intellimouse
-Deleting the USB and letting it re-detect that and the mouse
-Just starting the system with the Intellimouse without deleting anything

The Intellimouse shows up in the mouse section of the control panel (I'm running XP Home Ed.)
but I simply can't move the cursor. I actually thought that the mouse was ment to have 2 lights under it but I'm not sure. my guess is that the camera in the mouse is dead, my friend didn't know if it worked or not, but I just want to make sure before I dispose of it.
Could it be worth trying it using a USB to PS/2 coverter?

With the picture that should appear with this post I have put a red box around where it lights up.

A:[SOLVED] Microsoft USB Intellimouse

Read other 11 answers

The mouse will randomnly turn off and on (the laser) and eventually shuts off indefinetly untill i unplug and then plug it back in agian. It happens usually when I am playing a pc game but it has happened while just browsing the internet before.

I thought it maybe be a bad cord connection type problem, but when it goes out for good i shake the thing like crazy and play with the cord on both ends and nothing happens, yet unplugging and plugging it back in will always get it working again ( for about 15 minutes )

Now my mb had a bunch of usb patches for xp and usb 2 and i uninstalled and reinstalled these and nothing changed. I dont think this is driver related becuase my keyboard is also usb and it has not gone out on me yet.

Broken part maybe? I hope not.. I havent even had the mouse for a year yet and it IS a very nice mouse indeed. I really dont wanna buy a new one only to find out I needed some other driver or the bad part is the mb plug in.

A:MS Intellimouse Explorer is spazing out.

have you tried it in a different usb port?

Read other 3 answers

My MS IntelliMouse will not scroll in WordPerfect. It used to,but not now.
What should I do to get it to scroll?

A:IntelliMouse scroll problem

Read other 6 answers

Does anyone know if microsoft will ever release a Serial version of their IntelliMouse Optical? Yes, it's sad, I only have a serial port, and nobody seems to make mice that are compatiable with it(they're all USB and/or PS/2).

Take a mega-byte out of my mega-chip!

A:Microsoft IntelliMouse Optical

I'm not sure about this, but i think it'd be tehnologically impossible to make a Serial optical mouse. I don't thinik the Serial Port would be fast enough.

Just remember, i could be wrong.

Read other 3 answers

I'm having trouble getting all the buttons for the intellimouse explorer to work with the scroll. I'm running Gentoo 1.4rc1. I can get the scroll to work when I set ' ZAxisMapping "4 5" ' but the extra buttons won't work. If I set ZAxisMapping "6 7" in my XF86Config file, the scroll in apps like Mozilla won't work. Is there any way to get this working as well as all the buttons?

A:MS IntelliMouse Explorer Problem

Hello Kyred, welcome to Techspot forums!

Have you defined the number of buttons in XF86Config? Not just ZAxisMapping but "Buttons" in the same section?

Read other 2 answers