Over 1 million tech questions and answers.

BSOD - Driver Power State Failure

Q: BSOD - Driver Power State Failure

Any help is appreciated. This BSOD error has happened 3 or 4 times over the past couple months.
Each time after a hard shut down and reboot it seems to work normal.
Today when before it happened Chrome internet was very slow/lagging but that might have been wifi related not sure.

thanks

Read other answers
RELEVANCY SCORE 200
Preferred Solution: BSOD - Driver Power State Failure

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98

Hi everyone, have had a huge amount of help from this website in the past and am wondering if anyone can help.

I have a year old Windows 7 Acer Laptop. Has been performing fine, but have had a couple of Blue Screens in the past week, one of which was a "Driver Power State Failure".

Have attached the minidump files to this message. If anyone can help it would be greatly appreciated.

Thanks,
Jon
 

A:BSOD Driver Power State Failure

don't like to bump my own threads but if anyone can help, would be great help.
 

Read other 1 answers
RELEVANCY SCORE 98

Hi,

I an getting BSOD randomly and it is driving me a little loopy.

I was getting a Internal power failure on the machine sleeping but preventing hibernation solved that. I create a task to set the power plan to my preferred plan (never sleeps) and that has solved that issue.

Now I am getting this Driver Power State Failure about 30 minutes after I turn the machine on. Full details in attached Zip File. I tried to uninstall SP1 at one point, but it said it could not uninstall everything.

Windows Debuggers says this:

Loading Dump File [C:\Windows\Minidump\041211-70512-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?00000000`00000000?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: srv*n:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`03204000 PsLoadedModuleList = 0xfffff800`03449e90
Debug session time: Tue Apr 12 09:41:28.605 2011 (UTC - 4:00)
System Uptime: 0 days 0:21:38.620
Loading Kernel Symbols
...............................................................
................................................................
................................................................
... Read more

A:BSOD Driver Power State Failure

I have re-attached all the details, I realise the last one was incomplete.

Read other 5 answers
RELEVANCY SCORE 98

Hi, i'm constantly receving a BSOD on shutdown. The picture is attached.

These are my specs:
? OS - Windows 7 ?? x64 ? ? This one? ? All purchased from retailer? ? Bought it 2 months ago ? I havent reinstalled anything? ? Intel Core i5 ? Radeon HD 6490m ? HP ? ProBook 4530s

I wasn't able to retrieve the Perfmon report because it crashed. Nevertheless I joined the all the windows .dmp files.

A:BSOD Driver Power State Failure

MSINFO32 blames the drivers for your USB 3.0 controller.
Download and install this driver: http://h20000.www2.hp.com/bizsupport...tem=ob-97228-1

Most likely the above will fix the problem. If not, post back and we'll run hardware tests. Good luck!

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs:
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please either update the older drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers.

Code:

iaStor.sys Wed Jan 12 20:50:12 2011 (4D2E5A54)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
aswSnx.SYS Mon Nov 28 12:54:05 2011 (4ED3CABD)
btfilter.sys Tue Jan 04 04:41:55 2011 (4D22EB63)
aswTdi.SYS Mon Nov 28 12:52:18 2011 (4ED3CA52)
MfeEpePc.sys Wed Feb 09 06:59:50 2011 (4D5281B6)
hpdskflt.sys Fri May 13 14:47:02 2011 (4DCD7CA6)
sncduvc.SYS ... Read more

Read other 1 answers
RELEVANCY SCORE 98

I am having the Driver Power State Failure . BSOD and the Driver Power State Failure msg. Hard to restart or shut down. I ran Windows Debugger and the mini dump msg. was.

Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

I am attaching dump file and also sending cloud link sending the link to my cloud with the entire mini dump file.

http://sdrv.ms/VJZV3y

Thank You
Allen Skaggs
 

Read other answers
RELEVANCY SCORE 98

Hello,

I have a BSOD problem that states Driver Power State Failure. I read it is caused by a problem with a change in the alimentation mode or something, but this BSOD really happens randomly (last time occurred while I was reading a web page... I didn't even touch a key or the mouse).

I'm running Windows 7 32bits, my laptop is 3 or 4 months old (windows 7 was already installed).

I tried to run the batch from the "Blue Screen of Death (BSOD) Posting Instructions", but no folder is created when it's done... I followed every step (also ran the batch as an admin) so I don't know where the problem is coming from. The batch runs smoothly until the end, but there is just no folder created in my Documents folder. (I don't know if this is normal, but on the line right after "We will begin in 5 seconds..." there is a message saying that "the path hasn't been found" (my os is in french, so I don't know exactly what is the original line in english) but the batch still runs to the end).

I attached my last 3 minidumps, the perfmon file and a msinfo32.nfo file.

Thanks in advance for your help!

A:BSOD Driver Power State Failure

Please follow these instructions --> http://www.techsupportforum.com/f217...ns-452654.html

Read other 9 answers
RELEVANCY SCORE 98

I've been dealing with random BSOD for months now when I sleep/hibernate my computer. Lately it has gotten quite bad and happens nearly everytime. I'm thinking it is a hardware issue, but I'm trying to rule out a software issue. I've tried to update every outdated driver on my laptop to the latest version. Nothing seems to help.

I've also run full hardware diagnostics/memory scans, and that doesn't reveal any problems.

Any help before I throw the computer out the window would be appreciated!

Thanks,
Michael

A:BSOD Driver Power State Failure

raterus, welcome to SF .

You mentioned several bugchecks occurring over a period of a few moths yet the file
contains not more than one dump file, if you have the rest please upload them as well.

As for the bugcheck in question.

The predominant driver of the stack is nvkflt.sys:


Code:
fffff800`00b9c4e0 fffff880`0470b854 nvkflt+0x38854
fffff800`00b9c4e8 fffff880`0470c938 nvkflt+0x39938
fffff800`00b9c4f8 fffff880`046f32d4 nvkflt+0x202d4
fffff800`00b9c518 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c520 fffff880`046f327c nvkflt+0x2027c
fffff800`00b9c580 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c598 fffff880`046e569c nvkflt+0x1269c
fffff800`00b9c618 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c630 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c638 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c648 fffff880`046e569c nvkflt+0x1269c
Driver Reference Table - nvkflt.sys

If we check it's time-stamp we can see that it is not inline with your description of the problem
being it is very recent.

Code:
Timestamp: Fri Aug 09 21:59:07 2013
Driver Version 9.18.13.2078
Download the latest version offered by your OEM.
Dell Support
Attachment 285494
Looking at the bugcheck we can see it's due to the PNP-subsystem:

Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
... Read more

Read other 7 answers
RELEVANCY SCORE 98

ah.....when i try to shut down my laptop....it just shows shutting down for 5-10 minutes and then.....bang!!!
this BSOD occurs..
and i'm not able to run perfmon /report
it says an error occurred
"can't find path specified"
Help please!!

Also,I can't connect to Internet and control panel doesn't respond on starting..

A:BSOD:Driver power state failure

Skip the perfmon /report and upload the zip file

Read other 4 answers
RELEVANCY SCORE 98

Hi. Im having a problem with my computer. The last few days I have been having a new BSOD problem. I have been getting a driver power state failure for a while and I had it fixed but when I updated my graphics card drivers it started again and I cant figure out why. Any help would be much appreciated.

A:BSOD Driver Power State Failure

Welcome to the forum.

Based on the bugcheck, I would recommend you follow and complete the steps given below:





Quote:
1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot o... Read more

Read other 1 answers
RELEVANCY SCORE 98

I've been getting a blue screen for the past week now every time my computer goes to sleep with the Driver Power State Failure message. I've done a lot of research and can see that this is likely due to a faulty driver that isn't updated, and since Windows Update has recently been doing a lot of updating I suspect this is the case. I just need to know which driver is causing the problem. More info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8006B26060
BCP3: FFFFF80000B9C518
BCP4: FFFFFA80099CC970
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\101613-28048-01.dmp
C:\Users\Owner\AppData\Local\Temp\WER-207403-0.sysdata.xml

A:Driver Power State Failure BSOD

   Warning
Edit: Please follow Arc's instructions first
Welcome to the Forum.

Check for an update on the driver below:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800708fa10, fffff80000b9c518, fffffa8006ea7bd0}

Probably caused by : pci.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800708fa10, Physical Device Object of the stack
Arg3: fffff80000b9c518, nt!TRIAGE_9F_POWER on Win7, otherw... Read more

Read other 3 answers
RELEVANCY SCORE 98

I'm running Windows 7 Home Premium on an HP Pavilion Elite e9180f machine. I have an Intel core i7 processor (2.66 GHz), 9GB RAM.

I received a BSOD when Windows was shutting down. The message said "DRIVER_POWER_STATE_FAILURE".

I've attached the results of running the BSOD_Vista_v2-2_jcgriff2_.bat file and perfmon.

Thank you in advance.


Brad

A:Bsod driver power state failure

Please start by going to Device Manager and right clicking on the Microsoft Teredo Tunneling Adapter(s). Select Uninstall and let it uninstall the adapter. Don't be surprised if the adapter doesn't come back when rebooting - the only problem would be if it still shows an error condition after rebooting.

I suspect that this will fix the BSOD's, but we'll have to look at the dump files and (at a minimum) replace the networking drivers just to be sure.

....Running the dump file now.....

The dump file blames e1y62x64.sys - a component of your Intel(R) PRO/1000 Gigabit Networking Adapter

Please download a copy of the latest Windows 7 64 bit driver for this device from the Intel Download Center ( http://downloadcenter.intel.com/Default.aspx )
Then uninstall the current Intel networking driver from your system
Then install the freshly downloaded driver and monitor for further BSOD's.

Please also update this driver: 000.fcl Fri Sep 26 09:11:22 2008
It is a component of the Cyberlink program installed on your system.

Summary of the BSOD:

Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Jan 28 19:05:24.908 2010 (GMT-5)
System Uptime: 0 days 10:14:11.188
BugCheck 9F, {3, fffffa80083a6060, fffff800044e8518, fffffa800b85a790}
*** WARNING: Unable to verify timestamp for e1y62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1y62x64.sys
Probably caused by : e1y62x64.sys
DEFAULT_BUCKET_ID: ... Read more

Read other 1 answers
RELEVANCY SCORE 98

Thanks for reading my post. I've been using my Gateway laptop for 3 years with relatively few problems. Since June or so, I've been seeing random blue screens, with no consistent series of events, or none that I can see. I'm attaching the sevensforum folder. Any help would be appreciated.

A:BSOD- driver power state failure

Welcome
You reports were consistent. The cause seems to be this driver
O2sdx64.sys file descriptionProductname: O2Micro SD Reader Driver Description: O2Micro SD Reader Driver (AMD64) O2Micro
Go to the company website and update the driver or replace the software

Read other 3 answers
RELEVANCY SCORE 98

Hi,

My laptop has been having the following issue:

Sometimes when I put my laptop into hibernate it experiences a blue screen of death and states that the problem is due to a driver power failure.

I have a:

Dell 1745
500GB HDD
4GB RAM
Intel Core2 Duo CPU P7450 @ 2.13GHz

Windows gives me the following information on the error:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8003C9D060
BCP3: FFFFF80004BA84D8
BCP4: FFFFFA80049AFB80
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Also find the attached dump file.

Thank you for any assistance.

A:BSOD Driver power state failure

Welcome Jack, please follow the Blue Screen of Death (BSOD) Posting Instructions .
The dump file uploaded is a 0x9F which is DRIVER POWER STATE FAILURE that happens in
transitions between power states most commonly S0 (ON state) > S3 (Sleep state)
or vice-verse. You can read more HERE.

The most common cause is a device driver but sometimes it's the hardware itself
that is at fault.


Code:
BugCheck 9F, {3, fffffa8003c9d060, fffff80004ba84d8, fffffa80049afb80}

Probably caused by : pci.sys ◄//Being falsely accused.

Code:
!irp fffffa80049afb80
Irp is active with 4 stacks 3 is current (= 0xfffffa80049afce0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa800766d050 00000000 fffff80002ecb200-fffffa80092ac010 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\netw5v64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for netw5v64.sys ◄//The actual culprit.
*** ERROR: Module load completed but symbols could not be loaded for netw5v64.sys
\Driver\netw5v64 nt!PopSystemIrpCompletion
Not surprisingly the driver is very very old!

Code:
lmvm netw5v64
start end module name
fffff880`0604a000 fffff880`06585000 netw5v64 T (no symbols)
Loaded symbol image ... Read more

Read other 8 answers
RELEVANCY SCORE 98

As the title says, I'm experiencing a Driver Power State Failure BSOD, I'll include informations gathered by the BSOD File Collection Script and Speccy below. I suspect my HDD might be the culprit but I'm not sure.
 
https://dl.dropboxusercontent.com/u/18557414/bsod/BSOD.zip

Edit: Mirror: http://www.mediafire.com/download/el91ery9g4t51na/BSOD.zip
Summary
Operating System
Windows 8 64-bit
CPU
Intel Core i7 3517U @ 1.90GHz 50 °C
Ivy Bridge 22nm Technology
RAM
4,00GB Single-Channel DDR3 @ 798MHz (11-11-11-28)
Motherboard
ASUSTeK COMPUTER INC. K56CM (SOCKET 0) 49 °C
Graphics
Generic PnP Monitor ([email protected])
Intel HD Graphics 4000 (ASUStek Computer Inc)
2048MB NVIDIA GeForce GT 635M (ASUStek Computer Inc) 44 °C
Hard Drives
466GB Hitachi HTS545050A7E380 (SATA) 35 °C
Optical Drives
HUAWEI Mass Storage USB Device
DTSOFT Virtual CdRom Device
MATbleepADVD-RAM
Audio
Realtek High Definition Audio
Operating System
Windows 8 64-bit
Computer type: Notebook
Installation Date: 17.11.2012 00:12:00
Serial Number: *****-*****-*****-*****-*****
Windows Security Center
User Account Control (UAC) Enabled
Notify level 2 - Default
Firewall Enabled
Windows Update
AutoUpdate Download Automatically and Install at Set Scheduled time
Schedule Frequency Every Day
Schedule Time
Windows Defender
Windows Defender Disabled
Antivirus
AVG AntiVirus Free Edition 2013
Antivirus Enabled
... Read more

A:Driver Power State Failure BSOD

to the Bleeping Computer forum.
 
 
Your issue seems to be probably caused by outdated storage controller driver.

BugCheck 9F, {3, fffffa800470c060, fffff88002f017f0, fffffa80046e8870}

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
Probably caused by : iaStorA.sys
Please try the below steps.
 
Update Chipset driver.
 
1. If there is Intel Rapid Storage Technology driver installed in your system, please uninstall it completely first.
 
2. Download and install latest chipset driver from the below link.
 
    https://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/20775/eng/infinst_autol.exe&lang=eng&Dwnldid=20775
 
Change power power plan to high performance.
 
Please read the excellent guide from below link and make sure power plan is set to "High performance". 
 
http://www.eightforums.com/tutorials/5464-power-plan-settings-change-windows-8-a.html
 
This will prevent core system components to enter in to power saving mode. Extreme power saving options are meant for portable computers and absolutely not necessary in a desktop machine.

Read other 5 answers
RELEVANCY SCORE 98

Whenever my Nvidia geforce GTX 460m is enabled in Device Manager the laptop crashes. Sometimes it will crash after a minute, sometimes a few hours. I'm beginning to think it's a hardware problem but I'm not sure. The requested zip file is attached.

A:BSOD: Driver Power State Failure

Hi, Welcome to the forums.

Your logs show a driver is causing an inconsistent power state:


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa8009862a10, fffff80000ba2748, fffffa800ebc1010}
Probably caused by : ACPI.sys
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRIVER_POWER_STATE_FAILURE (9f)
These are the drivers in question (in RED) :


Code:
0: kd> !devobj fffffa800c1dfe40 f
fffff8000342dfb0: Unable to get value of ObpRootDirectoryObject
Device object (fffffa800c1dfe40) is for:
InfoMask field not found for _OBJECT_HEADER at fffffa800c1dfe10
Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WAR... Read more

Read other 9 answers
RELEVANCY SCORE 98

I got a BSOD earlier and the error was "DRIVER_STATE_POWER FAILURE. Requested files attached and I also found this info in my system logs:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa8007694060, 0xfffff800045e7748, 0xfffffa8008f9c680).

My system specs are available in my profile.

I hope I did everything correctly, and thanks in advance for the help!

A:Help With Driver State Power Failure BSOD

Hi GirlFriday and welcome to the forum.

Security App

Code:
avgrkx64.sys Fri Feb 8 09:14:05 2013 (51146D7D)
avgldx64.sys Fri Feb 8 09:14:24 2013 (51146D90)
avgloga.sys Fri Feb 8 09:14:29 2013 (51146D95)
avgidsha.sys Fri Feb 8 09:14:48 2013 (51146DA8)
avgmfx64.sys Fri Feb 8 09:14:48 2013 (51146DA8)
avgtdia.sys Thu Mar 21 07:50:47 2013 (514A6777)
avgidsdrivera.sys Fri Mar 29 07:40:56 2013 (5154F128)
avgtpx64.sys Tue May 7 18:38:19 2013 (5188F5BB)
Crashes indicate AVG being a possible cause. Remove AVG and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software. Microsoft Security Essentials and Malwarebytes are recommended from a strict BSOD perspective. They do not cause blue screens on the system as other AV products do.

Microsoft Security Essentials, Free antivirus for windows and Malwarebytes Anti-Malware Free



   Information
Do not start the free trial of MalwareBytes, unselect that option when prompted.


Update and make full scans with both separately.


Start up

Keep less stuff at the start-up. Only anti-virus, this helps avoid driver conflicts and improves time to log in to windows.
Troubleshoot a Problem by Performing a Clean Startup in Windows 7 or Vista
How to Change, Add, or Remove Startup Programs in Wind... Read more

Read other 9 answers
RELEVANCY SCORE 98

hey
sometimes when i shut down my computer it takes forever to shut down and then i get a BSoD. i attached a zip file with the dumpfiles.
hope you guys can help me
regards kayabrico

A:Driver power state Failure BSoD

Hi,

The attached DMP files are all of the DRIVER_POWER_STATE_FAILURE (9f) bugcheck.

This error occurs if drivers do not handle power state transition requests properly, usually during one of the following procedures: shut down, suspending or resuming from standby, suspending or resuming from hibernation.

IMAGE_NAME: asmthub3.sys

MODULE_NAME: asmthub3

FAULTING_MODULE: fffff88006d73000 asmthub3

Running an !irp on the blocked IRP address (4th parameter of the bugcheck) we get:


Code:

0: kd> !irp fffffa80148ba3c0
Irp is active with 7 stacks 6 is current (= 0xfffffa80148ba5f8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8013d45430 00000000 fffff80002e776f0-fffffa80155be4c0 Success Error Cancel pending
\Driver\asmthub3 nt!IopUnloadSafeCompletion
Ultimately, it appears asmthub3.sys is the culprit here, wh... Read more

Read other 19 answers
RELEVANCY SCORE 98

Hello at all.

Sometimes when i try to shut down my compuer, it hangs for a little bit and than i get a bsod with the driver power state failure 0x9F.

This is not every time but randomly.

I hope anyone can help!!!

? OS -Windows 7
? x64
? What was original installed OS on system? Windows 7 x64
? Full retail
? Age of system (hardware)- 1 year
? Age of OS installation - have you re-installed the OS? one year, never re installed

? CPU - intel i5 [email protected] 3,4GHz
? Video Card - Nvidia GTX 680
? MotherBoard - Asus P8Z77-V LX
? Power Supply - BeQuiet & 750w

A:BSOD driver power state failure

Hi, and welcome to TSF.

Please navigate to c:\windows\minidump, zip up any minidumps you find and attach to your next post.

I'm not sure what the analysts do in cases like this but the BSOD.zip that you attached contains your perfmon report but its in German. Anything you can do about that from your end?

Read other 6 answers
RELEVANCY SCORE 98

Hello- First-timer! Sorry, I hope this isn't a redundant post. I'm not too savy and don't understand all the lingo so go easy on me.

Backstory: This is my first post and I'm very new to the computer world (beyond the basics). I decided to try and take on my first build (everything new except PSU and case). Everything seemed fine until recently.

Problem: I keep getting the BSOD shortly after coming out of sleep mode. It mentions "Driver Power State Failure". I have read several posts claiming similar happenings but all of the replies seem very specific to people's hardware and associated drivers so I wasn't sure how to apply it to my situation. Any help is greatly appreciated.

I have attached my dump files.

Thanks!

A:BSOD - Driver Power State Failure

Hello Doonga. This crash is caused my M Audio drivers.

Code:
Irp is active with 9 stacks 7 is current (= 0xfffffa80101bc8c0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800ee08060 00000000 fffff88004384fd4-fffffa800ee337a0
\Driver\usbhub ks!CKsDevice::CompleteDevicePowerIrp
Args: 00000000 00000000 00000000 00000002
>[ 16, 2] 0 1 fffffa800ee33c20 00000000 00000000-00000000 pending
\Driver\MAUSBFASTTRACKULTRA
Args: 00041100 00000001 00000001 00000002
[ 16, 2] 0 e1 fffffa800ee3be30 00000000 00000000-00000000 pending
\Driver\ksthunk
Args: 00041100 00000001 00000001 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800fe96220
And that is very old.

Code:
start end module nam... Read more

Read other 4 answers
RELEVANCY SCORE 98

My computer crashes randomly. Giving me the blue screen error, Driver Power State Failure. Not sure how to resolve this issue.
Assistance required ASAP.
I'm working on a senior project and my computer crashing is eating up valuable time.

A:BSOD Driver Power State Failure

Hello win7ndhlp.

You are facing some extensive network related crashes. And this is behind them all.

Code:
fffff880`031d72f8 fffff880`02ecf96eUnable to load image \SystemRoot\system32\DRIVERS\SymIMv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SymIMv.sys
*** ERROR: Module load completed but symbols could not be loaded for SymIMv.sys
SymIMv+0x196e
Description here: Driver Reference Table - SymIMv.sys

I dont believe that the best policy of network security is network blocking.

Uninstall Norton and all Symentec products using Norton Removal tool.
AND OMG

Code:
Start Menu\Programs\AVG 2011
Start Menu\Programs\AVG PC Tuneup 2011
Start Menu\Programs\AVG PC Tuneup 2011\Utilities
Start Menu\Programs\McAfee Security Scan Plus
What have you done! 3 AV programs at a stage, specially two crapware!!! Get rid of them at once. Uninstall AVG using AVG Remover. Uninstall McAfee Using McAfee Removal Tool. NEVER use more than one real time protection program. Use Microsoft Security Essentials as your only antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one.

For your USB network adapters (EVDO) you need to do some general USB related troubleshooting. For the port, first, uninstall and reinstall the USB ports drivers.
Right click on Computer icon > manage. It will open the computer management window.
Click on "Devi... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hello, having a driver power state failure. Can't figure out the driver thats causing the problem. Any advice on fixing? Thanks

A:bsod driver power state failure

Hello soupbox.

As a test, can you disable the webcam via device manager, and see if it continues to crash, or stops?

Whatever may the result be, let us know.

Read other 4 answers
RELEVANCY SCORE 98

Hi to all!
I'm r2. I'm having a problem on my system:
Processor: Intel core i7 875k, 9months
Motherboard: Maximus III gene, 4months
Memory: 8gb Ripjaws 1600mhz, 1.5year
Videocard: HD4870, 1.5year
Power supply: ocz sxsII 600w, 4months
Hard drive: WD 500gb, 1.5year

OS: Windows 7 x64
Observation:
Clean install OS 4 times. Shared the same symptoms
- it occurs when an application does not respond, but I can move through windows normally without lag. Then this application cannot be terminated under windows task manager. Since this application did not respond, I decided to shut it down. "logging off" for about 2-3minutes then "shutting down" for about 10-12minutes then BSOD appears stating "POWER DRIVER STATE FAILURE". It restarts automatically, freezes on windows log on screen (because I have to input password). Both mouse and keyboard does not move, even if reconnected. Rebooting the system on 'safe mode' does the trick on going inside windows, the event viewer shows: a bunch of 'network list service' and smb redirector shows at very short interval.

Even at 4th install of OS(delete drive, format to a new drive then install windows 7), error is still there.
It's been 2 weeks now, and it's very frustrating knowing that the error would show up.

thanks,
r2

A:BSOD Power Driver State Failure

Hi -

You have no Windows Updates installed.

Install ALL outstanding Windows Updates, including Windows 7 SP1 -

www.update.microsoft.com


Regards. . .

jcgriff2


`

BSOD SUMMARY

Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Apr 30 13:29:01.674 2011 (GMT-4)
System Uptime: 0 days 3:08:37.658
Probably caused by : HDAudBus.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_IMAGE_HDAudBus.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`066d3a20 fffff800`03fd9518 fffffa80`07364010
BiosVersion = 2103
BiosReleaseDate = 12/15/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
MaxSpeed: 2930
CurrentSpeed: 2942
??????????????????????????????????????????????????????????????????????????????????????``

Read other 17 answers
RELEVANCY SCORE 98

This is a HP pavilon dm4 Laptop, windows 7 64 bit.

The BSOD seems to always happen when the computer is plugged in, although it has happened a couple times when it wasn't. Its never when I am in the middle of doing something, only when I leave the computer alone for a while will it crash like this. For example, even if I am just listening to music or watch a movie, it doesn't crash. It's like it does this when it gets bored or something... As long as it is doing something it is fine.

I updated the drivers using HP's tool, but the problem hasn't gone away.

A:BSOD Driver Power State Failure

Sorry, I posted the incomplete file the first time... Here are the other files because the complete .zip file exceeded the maximum size.

Read other 2 answers
RELEVANCY SCORE 98

Hello,

I've been getting these BSODs and the error says it's caused by the ntsokrnl.exe. Below are the details of my laptop and I've attached the required reports. Any help is appreciated.

Thank you!

ASUS Laptop model K53E-BR5

- Windows 7
- x64
- OEM
- Age of system: 8 months old
- Age of OS: 8 months old

- CPU: Intel i3-2310M
- Video card: Integrated Intel HD Graphics 3000 video
- Motherboard: Not sure about the motherboard, this is an Asus Laptop with the Bios version: American Megatrends Inc. K53E.216

A:BSOD - Driver Power State Failure

Hi -

What is plugged into USB ports?

Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa800714f060 00000000 fffff80002ed07f0-fffffa80029c1220 Success Error Cancel pending
\Driver\usbhub nt!IopUnloadSafeCompletion
Args: 00016600 00000001 00000001 00000006
[ 16, 2] 0 e1 fffffa800700da00 00000000 fffff80002ed07f0-fffffa800ca43120 Success Error Cancel pending
\Driver\usbccgp nt!IopUnloadSafeCompletion
Args: 00016600 00000001 00000001 00000006
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800280a790
Run - http://www.techsupportforum.com/foru...ed-473665.html


Regards. . .

jcgriff2


`


BSOD SUMMARY

Code:
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\041312-15771-01.dmp]
Built by: 7601.17790.amd64fre.win7sp1_gdr.120305-1505
Debug session time: Fri Apr 13 16:28:36.571 2012 (GMT-4)
System Uptime: 0 days 1:10:36.554
Probably caused by : usbhub.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_IMAGE_usbhub.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`0714f060 fffff800`00b9c3d8 fffffa80`0521f860
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\040812-19172-01.dmp]
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Sun Apr 8 23:24:59.031 2012... Read more

Read other 10 answers
RELEVANCY SCORE 98

I got a bluescreen named "Driver Power State Failure" when trying to turn off my computer.

Two days ago, I got the first bluescreen on this computer with "Display Driver", I updated the driver on my graphics card (ATI Radeon HD 4850 Series) to see if it fixed the problem. After this first bluescreen it was also a problem turning on the computer: Windows doesn't automatically start, so I have had to go into the BIOS and (Ctr+Alt+Del) to restart for some reason, before I get into the boot menu. From there I have tried starting windows, failing every time, leading to Start Restore (or something, can't remember what it's called) starting, working for a good 10 minutes, restarting computer, and Windows starts loading. After about half an hour, or the time it takes before the screen goes black from inactivity, the login screen appears when I wake the computer. From this state it works normally. However, after waking it from Sleep Mode (keyboard/mouse click) I can't do anything, and after a while Windows shuts down and restarts the computer (to the screen with "Del: Enter Screen F12: Boot Menu")

It's from here the new BSoD came in: I used the power button to try and shut down Windows normally (after the inactivity problem after Sleep Mode), which took about 15-30 minutes with the "Shutting down... Please Wait"-screen, before I got this bluescreen (Driver Power State Failure).
I have now turned the computer off and restarted it. I... Read more

A:Driver Power State Failure BSoD

Let's start with updating/replacing your nvstor32.sys driver (it was blamed by the crash dump)
From this link: http://global-download.acer.com/Step...&SC=PA_7&LC=en
Download and install the Chipset and the SATA AHCI drivers

Also, please update these older drivers (especially the one's from 2001, 2004, 2005, and 2006):

Code:
zntport.sys Mon Jan 22 01:23:34 2001
NTIDrvr.sys Tue Dec 21 15:33:14 2004
tvicport.sys Wed Mar 30 05:12:36 2005
PxHelp20.sys Wed Oct 18 13:33:53 2006
nvraid.sys Wed Jun 06 16:34:41 2007
nvsmu.sys Sat Jul 07 18:13:09 2007
nvmfdx32.sys Mon Sep 10 22:10:00 2007
int15.sys Mon Jul 02 22:03:24 2007
int15.sys Mon Jul 02 22:03:24 2007
Here's the dump file analysis:

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR\TempDUMP\DATA\01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6002.18082.x86fre.vistasp2_gdr.090803-2339
Machine Name:
Kernel base = 0x82050000 PsLoadedModuleList = 0x82167c70
Debug session time: Sun Dec 20 15:10:03.404 2009 (GMT-5)
System Uptime: 0 days 21:32:15.596
Loading Ker... Read more

Read other 19 answers
RELEVANCY SCORE 98

Hi I just recently got a BSOD on my laptop DRIVER_POWER_STATE_FAILURE. I'm also guessing this is the reason that my computer seems to not sleep consistently.

Thanks

A:Driver Power State Failure BSOD

Oh ya.

Update, uninstall or disable:

agrsm64 agrsm64.sys Mon Nov 10 10:01:35 2008 (49184CCF)

Update if an actual update exists:

ATSwpWDF ATSwpWDF.sys Thu Oct 11 05:14:13 2012 (50768DE5)

Install latest Intel Management Engine Interface driver from Intel.com to replace this driver:

HECIx64 HECIx64.sys Thu Sep 17 15:54:16 2009 (4AB293E8)

Update Intel Graphics driver:

igdkmd64 igdkmd64.sys Mon Nov 26 19:26:05 2012 (50B4089D)

Update, uninstall or disable for O2 Micro controller (card reader):

o2mdx64 o2mdx64.sys Wed May 13 01:38:57 2009 (4A0A5CF1)
o2sdx64 o2sdx64.sys Thu Jun 25 23:34:11 2009 (4A4441B3)

Update Synaptics Touchpad driver:

SynTP SynTP.sys Fri Oct 26 19:29:57 2012 (508B1CF5)

Read other 1 answers
RELEVANCY SCORE 98

this is happening every day now, can anyone help?

A:BSOD driver power state failure

Hi,
Please reconfigure windows to collect the correct info
You want small memory dumps - "MiniDumps"

http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

And here are the instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html



   Tip
Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK

Cheers

Dave

Read other 9 answers
RELEVANCY SCORE 98

Hello,

About 50% of the time that I shut down my PC, it freezes on the message "Shutting down" and after a while gives me a BSOD. I also get a BSOD every now and then when I'm browsing the web. I've ran the SF diagnostic tool and will post the results here.

I also came across the following similar looking article:

Driver power State Failure

I would be extremely grateful if somebody could shed some light on the situation, I strongly believe that this is one of the main causes of my insomnia, after bankruptcy and alcoholism of course.

A:BSOD: Driver power State Failure

All of your BSODs are being caused by your graphics driver:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8007957a10, fffff80000b9c3d8, fffffa800717ae10}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys

Followup: MachineOwner
---------
Driver Reference Table - nvlddmkm.sys

Looking at the driver we can see it is very very old:


Code:
kd> lmvm nvlddmkm
start end module name
fffff880`0f000000 fffff880`0fc75d80 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Sun Jul 10 18:12:46 2011 (4E1A23DE)
CheckSum: 00C7AFE4
ImageSize: 00C75D80
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update the driver from here: Drivers - Download... Read more

Read other 9 answers
RELEVANCY SCORE 98

Laptop works fine as long as monitor doesn't go to sleep or if computer is shutdown. After a certain period of time when monitor goes to sleep, BSOD appears and then computer restarts. If I try to shutdown the laptop, it hangs. Screen just says "Shutting Down" for approximately 10 minutes and then get BSOD. Works fine in Safe Mode. I have 2 additional files that I will have to post in the thread. Any help would be greatly appreciated.

OS - Win 7 (x64)
HP HDX Laptop purchased in November 2009 with Vista...upgraded to Win 7 in December
CPU - Intel Core 2 Duo - P7450 / 2.13 GHz
Video Card - NVIDIA GeForce 9600M GT
Not sure about motherboard and power supply data...let me know where to find it and I will post.

Thanks!

A:BSOD - Driver Power State Failure

Attached are 2 additional files.

Read other 1 answers
RELEVANCY SCORE 98

Hi my Dell Inspiron N5110 laptop has been having the BSOD issues, these days if I shut the lid down, the laptop does not hibernate, even though the power settings are such.

I have got the blue screen a number of times, I have also restored the laptop to an earlier restore point, but it has not helped solve the problem.

I'm attaching the dump files as instructed, plz help me resolve this issue......
Thanks

A:BSOD Driver power State Failure

Welcome to SevenForums.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

The BSOD seems to be cause by HotSpot shield driver and Symantec/Norton seems to be contributing to it. (FYI, Norton is a frequent cause of BSOD-s.) I would suggest you to uninstall Norton and see if the problem persists, replace with Microsoft Security Essentials at least to test.
Norton Removal Tool
Recommended antivirus program for Windows 7 based on stability compared to others:-
Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.


Code:
0: kd> !irp fffffa80092dad50
Irp is active with 3 stacks 2 is current (= 0xfffffa80092dae68)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8008782050 000000... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hi everyone

I was getting alot of bluescreens and didnt need anything on my computer so have just reformatted this machine - However I am still getting some problems.

(Which makes it a hardware problem I assume)

However I do no know exactly what is wrong ?

Hope someone could please point me in the correct direction

Thanks alot!!

P.S this is another machine from my profile stats

Intel Core 2 Dual E6750 @ 2.66Ghz
500GB / 6GB DDR2 Ram
Radeon HD 6850
Asus P5KR motherboard

A:BSOD - Driver Power State Failure

Code:
BIOS Version/Date American Megatrends Inc. 0703, 26/06/2008
Please see if an updated BIOS is available for your PC.

Code:
0: kd> lmvm atikmpag
start end module name
fffff880`03a00000 fffff880`03aa0000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Sat Dec 07 06:51:45 2013 (52A231D9)
CheckSum: 0009FEFF
ImageSize: 000A0000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please check the AMD site to see if an updated driver is available for your Radeon card.

Uninstall Avast - its a known cause of BSOD's - replace it with MSE.

Read other 3 answers
RELEVANCY SCORE 98

Hello,

Did a clean install of Windows 8.1 - I previously had Windows 7. I have already had 4 'Driver Power State Failure' BSODs. I have attached the files from the SF Diagnostic tool.

Any solutions?

NB: This is a custom built PC with an Asus P8H61-M LX3 Plus R2.0 mobo.

Thanks in advance.

A:BSOD - Driver Power State Failure

Hi lfc123 and welcome to the forums!

Driver_Power_State_Failure with code 9F means that an Input / Ouput Request was not received back by the operating system even after a long time.

I have analyzed your DUMP files and the problem is caused by "netr28ux.sys" . I was only able to analyze the first DUMP file as the second one is corrupt, dunno why?

Visit this link Driver Reference Table

and update your driver from the given link.

Let me know incase the problem is not resolved and I will be happy to assist more
Also, if this solves your problem, please don't forget to mark this thread as solved.

Read other 1 answers
RELEVANCY SCORE 98

Hi

I recently changed the case and added some internal peripherials to my computer. I have a 950W power supply so what I have should not be Bluescreening my computer. I cannot open the ,dmp files to find out what is going on. Can anyone help?

My system:
Win 7 Ultimate 32bit
950W power supply
4 hard drives
2 Super Mulit Optical drives
1 flash card bay
Asus motherboard (that was running fine before I changed cases)
in win IRONCLAD case (4 120 fans, and 1 huge fan)

I am attaching the BSOD for today as a zip file.

A:BSOD with Driver power state Failure

Make and model of your Asus mobo?

Please post the info from this topic: http://www.sevenforums.com/crashes-d...tructions.html

Initial triage suggests a problem with vclone.sys - a component of your VirtualCloneCD driver.
This theory is also supported by the presence of drivers related to it that date from 2002 (ElbyCDFL.sys and
ElbyVCD.sys)
I'd suggest uninstalling it to see if that stops the BSOD's

Also, your Norton shows up in the memory dumps, so I'd keep an eye on that.

PLease remove or update these older drivers. DO NOT use Windows Update or the update function of Device Manager:

Code:

ElbyCDFL.sys Thu Nov 28 09:18:04 2002 (3DE6259C)
- ElbyCDIO Filter Driver
- Driver Reference

dvd43llh.sys Mon Feb 07 13:16:49 2005 (4207B091)
- DVD For Free by RIF
- Driver Reference

ElbyVCD.sys Thu Nov 28 05:43:49 2002 (3DE5F365)
- VirtualCloneCD Driver
- Driver Reference

SI3114r.sys Wed Oct 03 17:45:37 2007 (47040D81)
- Silicon Image driver
- Driver Reference

DRVMCDB.SYS Fri Jul 21 14:20:31 2006 (44C11AEF)
- Drive Letter Access Component of Roxio Drag-to-Disc
- Driver Reference

SiWinAcc.sys Thu Jun 14 20:02:27 2007 (4671D713)
- Silicon Image driver
- Driver Reference

PxHelp20.sys Mon Jul 24 20:18:21 2006 (44C5634D)
- Sonic CD/DVD driver (used by many different CD/DVD programs)
- Driver Reference

DLARTL_M.SYS Thu Feb 08 23:04:41 2007 (45CBF2D9)
- Shared Driver Component of Roxio Drag-to-Disc
- Driver Reference

DLACDBHM.SYS Thu Feb 08 23:05:12 2007 (... Read more

Read other 1 answers
RELEVANCY SCORE 98

I know little about computers but I can follow directions well.

This is my computer

OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, Intel64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 4089 Mb
Graphics Card: NVIDIA GeForce 9800M GTS , 1024 Mb
Hard Drives: C: Total - 295242 MB, Free - 181383 MB;
Motherboard: Gateway , IMV , Not Applicable , INVALID
Antivirus: avast! Antivirus, Updated and Enabled

It has been giving me the blue screen of death at least daily for over a week usually around 8 pm but it does like to mix things up and do it at other times. It was doing this same kind of thing this past march and I reformated which fixed the problem. However I would rather not do that again. I did a system restore back to the begining of the month but that didn't help.

Based on Blue screen viewer most of my prolems have been caused by ntoskrnl.exe. I have attached JPEGs of what it shows
 

Read other answers
RELEVANCY SCORE 98

Hi,

Im having bsod driver power state failure on my brand new Asus N551JX. It happens after opening the lid without being plugged in.
Here is the minidump:
071515-27015-01.dmp :: Free File Hosting - File Dropper: File Host for Mp3, Videos, Music, Documents.

A:BSOD Driver Power State Failure

I think it might be a problem with the graphic card (gtx950m) driver

Thanks for your help

Read other 10 answers
RELEVANCY SCORE 98

I am getting this BSOD at random times when i am browsing or listening to songs.
The mouse freezes for 5 secs and then the screen goes blue and the only thing i can see is Drive State Power Failure and rest i couldnt read
i have attached the dump files pls help me out

A:BSOD Driver State Power Failure

There is no DMP Files attached in the Attached Files.

Dump Files - Configure Windows to Create on BSOD

Read other 3 answers
RELEVANCY SCORE 98

My brand new HP Envy computer already got this blue screen [driver power state failure was all I was able to read].
Got scared! Rebooted, it was hard to get the wifi connection back, but I did. Rebooted again, just to make sure, and it takes much longer time for it now, to come back to life.

I might add I wasn't doing anything at all when it happened ... just woke it up from sleeping.

[I'm a rather unexperienced user ]

A:Already BSOD - driver power state failure

Hi,
I am extremely sorry that this thread was not attended to. There are not many people in this field.
In case you still require help, kindly respond to this thread and I will be notified via email and you should expect a response from me in 48 hours.
Regards,
Pranav

Read other 1 answers
RELEVANCY SCORE 98

I am using Dell Laptop ( Model N5050) with Windows 7 Home premium 64 bit OS. My laptop crashes often in the past 3 months and getting a blue screen with the error message DRIVER_POWER_STATE_FAILURE
with some error code as 9F.

As suggested in the forum, I downloaded the DM log collector and it collected the information from my system.

Attaching the logs.

Please help me in fixing this BSOD. Thanks in Advance

Thanks,
Jeyaraj

A:BSOD - Driver Power state failure

Hi jeyaraj.

From the incomplete data you uploaded, we can say that the BSODs are caused by the wifi network adapter.

If you want further help on how to attempt to resolve the issue, you have to upload more data and info.

Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums
_______________________________________

Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa8007edb050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\athrx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
\Driver\athr
Args: 00014400 00000000 00000004 00000002
[ 16, 2] 0 e1 fffffa8007d887f0 00000000 fffff800036d0210-fffffa8005508d40 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8005508d40

Args: 00000000 00000000 00000000 00000000

Code:
fffff880`05c55000 fffff880`05f0a000 athrx T (no symbols)
Loaded symbol image file: athrx.sys
Image path: \SystemRoot\system32\DRIVERS\athrx.sys
Image name: athrx.sys
Timestamp: ... Read more

Read other 9 answers
RELEVANCY SCORE 98

Atleast once a day i get the BSOD. Usually It will crash while im playing a game. I have attached an SFdebugfiles zip i hope this will help to resolve my issuse.

A:BSOD Driver Power State Failure

Hi Crinall & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Sun Aug 24 07:36:48.770 2014 (UTC + 5:30)**************************
Probably caused by : pci.sys

BugCheck 9F, {3, ffffe001987d5880, fffff801244d1930, ffffe001987e5b00}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_ACPI_IMAGE_pci.sys

MaxSpeed: 2400

CurrentSpeed: 2394

BIOS Version G750JM.205

BIOS Release Date 02/11/2014

Manufacturer ASUSTeK COMPUTER INC.

Product Name G750JM

??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat Aug 23 05:28:42.138 2014 (UTC + 5:30)**************************
Probably caused by : pci.sys

BugCheck 9F, {3, ffffe001b5dee060, ffffd001dddc6930, ffffe001b5dd6010}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_ACPI_IMAGE_pci.sys

MaxSpeed: 2400

CurrentSpeed: 2394

BIOS Version G750JM.205

BIOS Release Date 02/11/2014

Manufacturer ASUSTeK COMPUTER INC.

Product Name G750JM

???????????????????????????... Read more

Read other 3 answers
RELEVANCY SCORE 98

Hello,

I am new to this forum, which I found online while searching for a fix to a BSOD I'm repeatedly having. I am hoping someone could help me out because it is getting extremely frustrating. The PC is used as a dedicated media center. So having the system go down multiple times during a movie is not fun at all.

I first noticed a problem with Win 7 about 10 or so days ago. The OS seemed to be slower than normal when logging on, but no issues other than that. Shortly thereafter when I would switch my TV input to my PC I was continually getting the login screen. I did a little research and it was suggested to change the Windows option to not restart on failure, which I did.

After making that change I noticed a repeated BSOD, with a Driver_Power_State_Failure message. The time varies on how long it will take before I get the crash, but it happens with certainty right now. Windows is also extremely slow logging in, and completely crashes after initial login frequently as well.

The only change that I can pinpoint is that I used a SATA to USB HDD converter to backup a hard drive. Well, attempted to backup. I cannot complete this due to system crashes. Also, I was having repeated system crashes with a portable HDD plugged in, and after unplugging it the system started on the next boot. This could be a coincidence, but I have not troubleshooted that further.

System Specs

? OS - Windows 7 ? x86 64bit ? What was original installed OS on system? - Win 7 Pro ? Is th... Read more

A:BSOD - Driver Power State Failure

I currently have Driver Verifier running, and installed Speccy. Link to output - http://speccy.piriform.com/results/e...uBcUrMpiUSPB2G

Read other 4 answers
RELEVANCY SCORE 98

hello,
is the second time (after resintalling windows 7 64-bit original copy) that my PC doesn't turn off and the BSOD - Driver power state failure appears. After that, I can't log in into windows (the computer doesn't charge windows). I have attached the dmp file. i don't know how to do to solve the problem.

thank you very much

Andrea

A:BSOD - Driver power state failure

Hi and Welcome back to SF!

This is probably driver issue. Please update the following driver

Code:
iaStorV iaStorV.sys Wed Apr 08 23:57:17 2009 (49DCD76D)
It was blamed in the dmp, the date of driver is old as well, please update it right now.
Intel Matrix Storage Manager driver


Code:
ASACPI ASACPI.sys Mon Mar 28 09:30:36 2005 (42476C4C)
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 10th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads

BUGCHECK SUMMARY:

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\TUANTR~1\AppData\Local\Temp\Rar$DI00.205\090410-1445895-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*e:... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hello,

i have started to get BSOD on the last couple of days. I can't think of anything newly installed or changed that might cause this. I hope that maybe you can find whats wrong from the information that I have attached.

Thanks in advance
Best regards
John

? OS - Windows 7 Ultimate SP1
? x64
? Original os Windows XP.
? retail
? Age of system less than two years
? Age of OS installation less than two years
? CPU - Intel Core2 Duo T9600
? Video Card - Nvidia Quadro NVS 160M
? MotherBoard - unknown
? Power Supply - unknown
? System Manufacturer - Dell
? Exact model number Latitude E6500

A:Driver power state failure BSOD

Hello,

It seems your Dell HSPA drivers are causing the issue. Try uninstalling the drivers for now, and if you really need the device, install these ones: Drivers and Downloads

...Summary of the dumps:

Code:

Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Tue Aug 9 16:32:04.422 2011 (UTC - 4:00)
System Uptime: 0 days 23:44:45.475
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
FAILURE_BUCKET_ID: X64_0x9F_3_ANALYSIS_INCONCLUSIVE
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Mon Aug 8 15:05:25.831 2011 (UTC - 4:00)
System Uptime: 0 days 8:29:32.160
*** ERROR: Module load completed but symbols could not be loaded for WUDFRd.sys
*** WARNING: Unable to verify timestamp for d554gps64.sys
*** ERROR: Module load completed but symbols could not be loaded for d554gps64.sys
*** WARNING: Unable to verify timestamp for d557bus.sys
*** ERROR: Module load completed but symbols could not be loaded for d557bus.sys
Probably caused by : d557bus.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: vlc.exe
FAILURE_BUCKET_ID: X64_0x9F_3_IMAGE_d557bus.sys
BiosReleaseDate = 07/30/2010
SystemProductName = Latitude E6500
??????????????????????????????????????... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hi, I have a problem with a blie blue screen.
I have a Toshiba Satellite Vista 64 amd turion x2 with OEM software. I just did a full system restore, and still have the same issue of crashes. For a while it started with seeming to be hot, then turning off, now BSOD.
OS - Vista/ x64
? What was original installed OS on system? same
? OEM version (came pre-installed on system)
? Age of system (hardware) approx 4 years
? Age of OS installation - have you re-installed the OS? two days

? CPU amd turion x2 TL-6 2ghz
? Video Card not sure
? MotherBoard
<DEVICE><DESCRIPTION>System board</DESCRIPTION><HARDWAREID>ACPI\PNP0C01</HARDWAREID></DEVICE> <DEVICE><DESCRIPTION>Motherboard resources</DESCRIPTION><HARDWAREID>ACPI\PNP0C02</HARDWAREID></DEVICE> <DEVICE><DESCRIPTION>Motherboard resources</DESCRIPTION><HARDWAREID>ACPI\PNP0C02</HARDWAREID>
? Power Supply - brand & wattage

? System Manufacturer toshiba
? Exact model number (if laptop, check label on bottom) p305d s8995e

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA800613E050
BCP3: FFFFFA80062CF060
BCP4: FFFFFA80050804C0
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini121211-03.dmp
C:\Users\Ed\AppData\Local... Read more

A:bsod driver power state failure

ati radeon video card x1250 8.401.0.

Read other 10 answers
RELEVANCY SCORE 98

Hello all
I started to have a driver power state failure bsod error. I don't what triggers the error it seems random to me tho I have a hunch about it's being connected to internet usage or hdd, like when I use spotify or dropbox it's likely to crash.

Uploaded both dm log and sf diagnostic log

Thank you all!

A:BSOD Driver power state failure,

Hello

It seems like Google Chrome is causing an issue I would uninstall that and see how that goes.
I am also seeing an error with your NVidia driver. The driver is dated Wed Jul 02 18:42:02 2014.
Try see if there is an update for your NVidia card.

I also noticed from dxdiag that your display is using the integrated Intel HD 4000 and not your GeForce GTX675m. Not to sure on this though, but that is what it seems like.

Are you using multiple displays?
Is your DVI or HDMI cable plugged into the Graphics card?
(Best to wait for additional input from someone else regarding the display)

- Callum

Read other 4 answers