Over 1 million tech questions and answers.

What MacBook hard drive do I require?

Q: What MacBook hard drive do I require?

Hi
My MacBook Pro (13-inch, mid 2012) model has recently stopped working. It was showing a folder with a question mark as it couldn?t locate the hard drive. I?ve tried everything and is hasn?t worked, so I took it the Apple store an they said the hard dive needs replacing but will cost 200. I?d rather do it myself for far cheaper. My question is can someone tell me what hard drive I require, which hard drive will meet performance needs and where I can buy this hard drive. Thank you

Read other answers
RELEVANCY SCORE 200
Preferred Solution: What MacBook hard drive do I require?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 62.8

Hello all,
I am trying to access my wife's macbook hard drive via my Windows computer using the Vantec SATA/IDE to USB 2.0 Adapter. The Apple techs said they could not get the drive to register when they hooked it up. However, we gave it a good drying with blow dryer.

The adapter works fine and all the correct drivers installed.

I am in disk management and the 250GB drive seems to be showing up. However, it is not showing up in My Computer and right click shows "assign a letter" is grayed out.

Please check out the photo:

http://s1150.photobucket.com/albums/o620/hawkpacific/?action=view&amp;current=Capture.jpg" target="_blank"><img src="http://i1150.photobucket.com/albums/o620/hawkpacific/Capture.jpg" border="0" alt="Photobucket

A:SATA USB Adapter With Macbook Formatted Hard Drive

You are going to need a utility like MacDrive
to read the files. About all you can do directly from the windows management in this instance is format the drive. (which would result in the complete loss of data on the drive)

Also if any of the apparent moisture involved got inside the housing it's very possible the data is damaged beyond recovery. Since hard drives save data to the disk by creating what is essentially rust (iron oxide) manipulated magnetically on the surface.

There is likely a free utility out there that does the job. I just don't deal with mac's very often personally so it's not something I would be aware of, you might try google.

Read other 2 answers
RELEVANCY SCORE 62.4

hi all.
i have 3 or 4 2.5 inch drives laying around.
the drives are of different capacity starting from 250gb to 1tb.
there is 1 250gb ssd also in the lot.
is there such a solution which will take all the 3 to 4 drives and make them as 1 big external drive?
 

Read other answers
RELEVANCY SCORE 55.6

Hi,
I would like to know that If i got an external monitor with usb ports on it and then connect my Macbook Pro 2015 to it via an HDMI cable, can i connect an external hard-drive onto the external display to transfer files to my macbook?
 

Read other answers
RELEVANCY SCORE 49.2

I bought a Toshiba satellite with win 8.1 about 18 months ago, then upgraded to Win 10 with no problems. About a month ago the hard drive died and Toshiba replaced it under guarantee, with Win 8.1. I tried to upgrade to Win 10 and it hangs after about five hours of downloading, updating, installing, rebooting etc. Microsoft tell me that I need new drivers from Toshiba. Does this sound reasonable?

Read other answers
RELEVANCY SCORE 49.2

Hello there,

First off thanks in advance for reading this! I would really appreciate some advice

I have a 17inch Macbook pro i7 laptop.

I was looking at the possibility of replacing the optical drive with a SSD drive (i never really use the optical drive anyways)

I found a place online where one can purchase the SSD drive and case so it fits into where the optical drive is also.

My question is has anybody else done this? and if so is it a good /bad idea?

And also once I replace the optical drive with SSD can I have it so my OS is working off of the new SSD drive and my original 5400rpm HDD will appear up as a separate drive for storage.
Im not sure if its relevant or not but here are the specs of my laptop

Mac osx 10.6.8
2.66 GHZ i7
8gb 1067 MHz DDR3

Thanks!
 

Read other answers
RELEVANCY SCORE 48.8

Driving me a bit nuts. Been through the error log and thought it might be an apple related problem but I can't make heads or tails of this as it does not link to any program or event. Any help is greatly appreciated.

JBL

A:Mouse & Keyboard freeze require hard boot

woodman,
Welcome to SevenForums.

We need your help:

Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec (left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

In the System Manufacturer Block, enter:
? Manufacturer and Model OR Custom build.
? ADD the word laptop, desktop, netbook or tablet.
For example:
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the ?Other Info? block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

With Speccy, you can select with your mouse/touchpad info from the display
and paste that info into your specs.

SIW is a marvelous program, but the free version does not offer
this capability.

Read other 8 answers
RELEVANCY SCORE 48.8

I just purchased a 320gb seagate hard disk with casing X-craft cooler master a month ago. I made two partition. I already used up 60% space of the hard disk.

Now, when i plug in my external hdd, the hdd not detected. But after try plug in and out for a few times. Windows require me to format in order to use the disk drive.

i. What should i do now?
ii. is the hard disk spoilt?
iii. should i (re)format the hard disk?

EDIT(UPDATED):
NOW my laptop no longer detect my external hard disk. THE BLUE LED AND SOUND from casing is PRESENT, but nothing detected in My Computer.
 

A:Formatted external hard disk require format?

Read other 6 answers
RELEVANCY SCORE 48.4

I've been working on this for about 4 days now, and I'm officially asking someone else for help. I even dished out $30 for RegCure Pro, hoping that it would fix some magical registry madness that is causing my problem.

I've installed a legit "System Builder" copy of Windows 7 Professional on a client's MacBook Pro 15" (2.3 quad-i7) 2011 model, on the Bootcamp partition that's formatted NTFS. It boots fine, and it restarts just fine, but when I actually shut the thing down and let it sit for longer than 60 seconds before turning it back on, the BSOD occurs on startup.

After 60 seconds or more of being completely off, a startup to the Windows partition will result in an IRQL_NOT_LESS_OR_EQUAL BSOD, and then it goes to the Startup Repair screen. It doesn't matter if I skip Startup Repair or run it - the system will boot either way, right after the BSOD. I can reboot the system 10 times in a row with no issues after this, but the second I shut down and leave it turned off for more than 60 seconds, the error returns.

I've attached my SF diagnostic file, so hopefully someone here can make some sense of this. This is a fresh install, by the way. This laptop had no issues for three years, then I replaced the stock RAM with 16GB of Patriot 1333 Mac RAM, a Crucial M4 512GB SSD, and I replaced 32bit Win7 Pro with 64bit Win7 Pro. I've run the Windows memory test from the DVD, and it found no memory issues. I ran the Mac version of memtest for 5 passes (about 4 h... Read more

A:MacBook Pro 2011 - Startup Repair BSOD after every Hard Shutdown

Hi caseyfriday.

One of the BSODs are blaming AVG.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {10, 2, 1, fffff80002ca6150}

*** WARNING: Unable to verify timestamp for avgldx64.sys
*** ERROR: Module load completed but symbols could not be loaded for avgldx64.sys
Probably caused by : avgldx64.sys ( avgldx64+2032d )

Followup: MachineOwner
---------
So better you uninstall AVG. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Also, Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
_______________________________________________________________________________________

Code:
BugCheck A, {10, 2, 1, fffff80002ca6150}

***... Read more

Read other 9 answers
RELEVANCY SCORE 48.4

I will explain set up followed by the specific problem needing help.
SETUP;
Desktop running XP crashed.Non recoverable.
New Desktop running Win 7
Named C Drive 'Londonserver'
Also has external drive 'Docsdata'
Downloaded all back up data no problem
Set up network no problem
Implemented Sharing of 'Londonserver' and 'Docsdata' drives

PROBLEM;
On Macbook running WIN XP
Deleted old mapping of drives
Re-mapped 'Londonserver' and 'Docsdata' drives
Can see all folders and files on 'Docsdata' but unable to access 'Londonserver'
have gone back to Desktop and checked all sharing and permissions for 'Londonserver' but unable to resolve this issue.
I would appreciate some advice as to where I am going wrong. Why was it so easy to map and access 'Docsdata drive but not 'Londonserver' ??
Thanks in advance.

HPDeskjet 6500 won't print either but I think this is a driver issue needing an X86 driver on this machine. Problem is I have it but don't know where to place the driver folder or file. In System32 folder maybe?

A:Sharing C Drive Win 7 with WIN XP MacBook

You would not move a driver folder for a printer from one computer to another, you just reinstall the driver. Software & driver downloads HP Deskjet 6540 Color Inkjet Printer | HP? Support this printer does not support Windows XP, only Windows 7 and 8.
On the XP partition of the Macbook Go to Start/Run and type ncpa.cpl and press enter. Right click the Local Area Connection/Properties Un-check File and Print Sharing. Apply and OK. See if that works, if not re-check it again.

Read other 6 answers
RELEVANCY SCORE 48

Pretty much what the title says.
I have a few hard drives (E, F, G), with a lot of data and programs installed on them, connected to my computer right now. Would I have to format them if I decide to re-install Windows on the system?

A:Would reinstalling Windows 7 require formatting of additional hard drives?

Hi-

In Short- No. However, it is always recommended to physically disconnect all other drives besides the one you are installing on. Also, if the drive that you are reinstalling on has multiple partitions, MAKE SURE that you choose the right one when reinstalling windows.

Also, just so you know, to do a full reinstall, choose "custom install" in the menu from the windows install disk. Also note that a reinstall will mean that you have to reinstall all programs that you currently have.

Regards,

Mark

Read other 1 answers
RELEVANCY SCORE 46.4

Hello
 
This  dialoge box appear :
 
Destination Folder Access Denied
 
You'll need to provide adminstrator permission to copy to this folder
 
Every time i can copy or move any file in any drive it ask for permission.Usually only C Drive ask permission.
Its annoying every time i copy.
But when i copy to my portable drive it doesn't ask permission.
I think its reading my other drives as system drives.
 
I have 3 internal (Two 500 GB and One 80 GB[C drive]) and One 500 GB Portable.
 
How can i fix it
 
 
Thanks
Tenis

A:Administrator Permission require to copy files (Every Drive)

Worth a read, IMO:  http://www.eightforums.com/general-support/9245-you-ll-need-provide-administrator-permission.html
 
Louis

Read other 3 answers
RELEVANCY SCORE 46.4

i am looking for a progam to transfer OSs and hard drive documents over to another drive because the drive is starting to fail. anyone know a progam that can do it? just like maxblaster that doesnt require a seagate drive

A:looking for software similar to maxblast but does not require seagate drive

download this DiscWizard | Seagate

when it asks you to buy full version or states you have to have at least 1 seagate HDD--- just hold ALT then the letter T then O ( technical override) then ok
full version to clone or do image backups

I've been using for years

Read other 2 answers
RELEVANCY SCORE 46.4

I have recently figured out that I can put my games on a 16gb USB flash drive and play them off a computer without having to log into said computer (so I could play them after school on campus computers). I have since put my games onto the USB flash drive, and have about 5gb left. However, when I tried to play them while logged in, it said I could not connect to the internet, and thus the game could not launch. I have searched the internet on how to connect to internet on a USB but have not found out where to, at least not when trying to get it from Windows 8, where I cannot view the properties of the connection and just copy it to a flash drive.

Thanks!
mccoyJ
 

A:Putting and using games that require internet on a USB Flash Drive

related to http://forums.techguy.org/windows-8/1137638-getting-internet-usb.html so also closed
 

Read other 1 answers
RELEVANCY SCORE 46

Have an old HP computer w/ Win95 that I need to get some files from. It only has a 3.5 drive for backups etc. Computer is still running and is fine. I've read past posts about taking out the hard drive and connecting it to the newer computer and copying files like that. My computer experience in opening computers and doing those types of things is limited to swapping out network/printer or serial cards. I'm not sure about hooking up a secondary drive, etc.etc.
When I get in to the computer (old and new), is this as easy as the threads have made it sound?

The files on the old computer are not big by todays standards but for floppies, they are giant! I have several external hard drives that I use for backups but they are all USB.

Thanks
carash123
 

A:TRF data from old computer - does hooking up old drive require lots of experience?

Have you considered using a USB case for the old '95 drive?

Just buy an empty USB case (they come with power sipply, USB cable etc) and fit your old Parallel ATA drive in the external case.

Drive jumpering should not even need to be touched.
 

Read other 2 answers
RELEVANCY SCORE 43.2

Hi all,
 
I am attempting to install Win7 in an Inspiron 1545 with a new SATA hard drive that was purchased. When i insert the drive, I get "Internal Hard Disk Drive Not Found." I have verified the drive is not showing in the BIOS, I've already attempted to reseat the drive several times. In addition, I've attempted to load the chipset drivers, SATA drivers, etc from Dells website, the drive still does not show in the OS install when booting to DVD or in bios.
I dont believe it to be an issue with the new drive, as I plugged the new drive into another model Dell laptop and it recognizes the drive fine in BIOS, also I can still boot to the previous hard drive in this laptop without issue when i plug it back in.
Is there a specific driver, etc that I need to use for the drive to be recognized or other thoughts people have?

A:Inspiron 1545- replacing hard drive, new SATA drive not found "Internal Hard Disk Drive Not Found

This is strange - either the new hard drive has a rare compatibility issue with your onboard controller (I use a 500Gbyte in my 1545 without probs)) or it is a mechanical problem.I would take a close look at the physical dimensions and compare your original hdd with the new one.Watch the video (even though it's about a 1525 (similar to an 1545) and an SSD hdd) -  go to 2:20

Read other 10 answers
RELEVANCY SCORE 42.4

ok i have a Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive and i need to the max of hard drive i can run or allow on my DEll Optiplex 740  small factor tower plus  also need help about if i can upgrade my  ADM Athlon Dual core Processor 4850e  and higher?

A:want to upgrade my hard drive Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive

Any 3.5" drive at 2T or under should work fine.  Upgrading the CPU would mean buying used - these CPUs went out of production not long after your system was current - and that was a decade ago.

Read other 1 answers
RELEVANCY SCORE 42.4

My lenovo Thinkpad Yoga S1 wont boot at all I've tried unplugging the battery,etc The only way I can get the computer to boot is when I unplug the hard drive then it boots into boot manager I've tried to reset bios without any luck The last thing I did was update my bios before it wouldn't boot anymore  any ideas?

Read other answers
RELEVANCY SCORE 42.4

My lenovo Thinkpad Yoga S1 wont boot at all I've tried unplugging the battery,etc The only way I can get the computer to boot is when I unplug the hard drive then it boots into boot manager I've tried to reset bios without any luck The last thing I did was update my bios before it wouldn't boot anymore  any ideas?

Read other answers
RELEVANCY SCORE 42

I recently used my system image disk to restore on a new (larger) hard drive but now when I look at the hard drive from the computer view it shows my hard drive as being the same size as the old one instead of being the size of the new one. I'm not sure
I'm making much sense so I will post a picture...

Is there anyway to fix this? Does the drive really only have 286 gigs on it?

A:System Image disks installed on new hard drive show new hard drive same size as old one

You have to be logged in as Admin to perform these operations.
Go to Start, and in the Search box, type in DISK MANAGEMENT. Pick the Control Panel item "Create and format disk partitions." Once Disk Management comes up, right-click on the area of your disk and select "Extend volume..." Move it out
as far as you want, making the whole thing one drive.
If that doesn't work for you, then you can download Easeus Partition Manager Home
http://www.partition-tool.com/personal.htm  and create a boot CD from it that will accomplish the same thing (and more, if you want to read up on it). It's a free program and works
with 32- and 64-bit Windows. I like it and use it myself.

SC Tom

Read other 4 answers
RELEVANCY SCORE 42

My T410i hard drive died, I have Windows 7 Home Basic OA key, but how to install on new hard drive? I had to replace the hard drive, I realise from the help pages I should have written down the error messages before replacing... Either way I am unsure how to obtain the Windows 7 Home Basic software to re-install.I have the key, where should I go - the microsoft site says it came pre-installed so I need to contact the supplier - Lenovo, but on the product list T410i is too old and not listed. Thanks in advance for you time.CheersPaul

Read other answers
RELEVANCY SCORE 42

I'm amateur pc user. Been trying fix problems all week. Changed power box due to over heating, used AVG & Superantispyware. Keeps asking to reboot and choose boot device, and several hints of mysterious behavior inside machine. Feels like something is eating it (paranoid spirituality). Anyone know what's going on. Please be gentle with me;Logfile of Trend Micro HijackThis v2.0.2Scan saved at 14:43:58, on 30/04/2010Platform: Windows Vista SP2 (WinNT 6.00.1906)MSIE: Internet Explorer v8.00 (8.00.6001.18904)Boot mode: NormalRunning processes:C:\Program Files (x86)\IObit\Advanced SystemCare 3\AWC.exeC:\Program Files (x86)\ASUS\AASP\1.00.61\aaCenter.exeC:\Program Files (x86)\SUPERAntiSpyware\SUPERAntiSpyware.exeC:\Program Files (x86)\Kontiki\KHost.exeC:\Program Files (x86)\IObit\Advanced SystemCare 3\Sup_SmartRAM.exeC:\Program Files (x86)\DT Utilities\DT Utilities PC Backup Pro\mgCtrl.exeC:\Program Files (x86)\Common Files\Java\Java Update\jusched.exeC:\Program Files (x86)\AVG\AVG9\avgtray.exeC:\Program Files (x86)\Entriq\MediaSphere\EntriqMediaTray.exeC:\Program Files (x86)\Entriq\MediaSphere\3.8.2.9\EntriqMediaServer.exeC:\Windows\Integrator.exeC:\Program Files (x86)\Trend Micro\HijackThis\HijackThis.exeR0 - HKCU\Software\Micr... Read more

A:Unknown problem,system restore&recycle bin&2nd hard drive vanished, 2nd hard drive

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers
RELEVANCY SCORE 41.6

I have two laptops, a ThinkPad T30 and a Latitude C840 (they are both working with XP SP2, except the T30 doesn't have a screen). I'd like to move the T30's drive into the C840, but when I do this, the C840 will hang right after the BIOS screen (incl. the XP CD's Press a key to boot off the CD if I tell it to boot from the disc drive first).

My first thought was to try Recovery Console from the XP CD. I can log into the install, and I've already tried fixmbring and fixbooting it. This doesn't help.

This leaves the option of the drivers not being right. I installed the C840 chipset drivers, nothing.

I'd really rather not go on a wild goose chase trying to figure out what'll get things up and running, so can you guys gimme a suggestion?

Thanks!
Ethan
 

A:Moved hard drive and cannot boot; hard drive accessable from Recovery Console

You can't simple move one drive from one machine to another because the drivers are specific to the hardware. Did you receive recovery CDs for the Latitude? If so, you could use them to "restore" it to its factory default with the new drive. This may actually be on a partition of the hard drive.
As an alternative, you could create an image of the original drive and restore it to the new one using some freeware such as DriveImage XML. To restore the image to the new drive, you'll need to boot to a bootable CD using something like UBCD4WIN and restore the image from somewhere on your network.
 

Read other 2 answers
RELEVANCY SCORE 41.6

I had a thread earlier and forgot to ask a couple of questions.

I was told I could take a hard drive from a windows 98 computer and the person is buying a new Windows xp so I can hook up the win 98 hard drive as a slave to the new computer with win xp so I can drop and drag or cut and past files that they want off the 98 hard drive put on their new computer.

Now If their new computer with the win xp on it, if there is an ide cable going to the hard drive and nothing else then I can hook up the win 98 hard drive to the same ide cable as a slave and no problem.

However if the windows xp computer has the hard drive on the ide cable and also the cd-rom then is it ok just to hook up another ide cable to their mother board and hook the hard drive from the windows 98 computer on the end of that ide cable as the master? and by turning the computer off, and then hooking up the hard drive and then turning the computer back on it should reconize the windows 98 hard drive in my computer right away right?

If I would have to put the windows 98 hard drive in the new computer on a seperate ide cable is it ok to have it as master? cause the hard drive that is already in it would be master to but it would be on a different ide cable.

I am hoping the new computer just has the hard drive on an ide cable by itself so I can just hook the other one up as a slave and get the files and be done with it.

How ever if someone could give me a couple or three scenario's with ide cables and hooki... Read more

A:Solved: windows xp hard drive with win98 hard drive-question if someone has time??

Yes - you understand it correctly
 

Read other 3 answers
RELEVANCY SCORE 41.6

Hey guys!

My Zune 80gb stopped working a while back. It wouldn't charge. So I thought I would take out the hard drive and use it as an external 80gb hard drive. So I bought an 1.8" ZIF encolsure for it and installed the hard drive into it.

All appears good with the installation. When I plug the hard drive into the PC the light on the hard drive enclosure comes on and stays on & the disk starts spinning. Then Windows Vista does the whole "Install new Hardware" thing and calls it a "Disk Drive" and a "USB Mass Storage Device" and says hardware is installed and ready for use.

But the problem is I can't seem to access the drive. I can't find it anywhere. It doesn't show up as a drive I can use or anything. I tried a third party partitioning prgram to try and find the disk so I could reformat it but it wouldn't it couldn't find it either. I even plugged the drive into my Mac thinking that Disk Utility might be able to recognize it and let me wipe it, but the Mac doesn't recognize it as anything.

Back in Vista, Using Device Manager, Vista notices the drive under the "Disk Drives" option as a "Disk Drive" and that it is elecronically signed by Microsoft (since it has the Zune firmware on it) but I can't do anything with it ... And this is the only place where I can see that the drive even exists. I can't reformat it or anything.

Can anyone help me? I thought I read somewhere... Read more

A:Putting a Zune 80gb Hard Drive in an External Hard Drive Enclosure, help please!

anyone?
 

Read other 3 answers
RELEVANCY SCORE 41.6

Hi,
I REALLY hope someone out there can help me with this!

I have a failed hard drive/ stuffed partion, and i DESPERATELY need the data from it!

A computer was brought into me with two hard drives. The owner asked me to set up a duel boot with vista and XP on the first hard drive, and to leave the second hard drive alone (its his backup drive with all his photos, movies etc) I was working away as per usual, when i noticed the second hard drive was no longer coming up in Windows Explorer. Well it was, but not correctly. whenever i clicked on it it said 'would you liket to format the drive?' obviously, i didnt want to do that.

I ran Partition Magic 8.0 which showed the drive was only 8Gigs (it should have been 1T or 1000Gigs) Partition Magic also said there was a problem with the drive and offered to fix it. I agreed, however there was no change.

I've run a number of programs to try and fix the drive:
Acronis Disk Director Server 10.0
Partition Table Doctor 3.5 Demo
Dtidata Partition Repair Tool
MHDD
Recover My Files v3.98
FileScavenger.

However, all the partition repairers claim that the drive is only 8 Gigs, and they can go no further. All the File Recovery Programs will only scan for 8 Gigs, and thus, i can not recover my clients precious photos and videos.

The BIOS comes up as recognizing the drive as 33Gigs?

I really REALLY need the data from this drive! Does anyone know how to fix my problem?

Thanx heaps in advance,

Ben
 

A:Solved: Hard Drive/ Partition Problems! My 1T Hard Drive appears as 8Gigs?!

I've used ZAR to recover files from a RAID box that seemed to have been corrupted due to a bad power supply.

You might check it out. It's free. Meaning it will only allow you to recover so many files at a time. I bought it, and like it.

They have a forum that is monitored quite often, from the developer too.

Good luck.

http://www.z-a-recovery.com/
 

Read other 3 answers
RELEVANCY SCORE 41.6

I see it can be done from an installed to an external, but can it be done in reverse, taking the external cased hard drive and cloning it to an internal? The old hard drive is from an xp laptop, and I can aquire another xp laptop if I can clone this way. Perhaps if I set the enclosure hard drive as master? All ideas are greatly appreciated. Many thanks
 

A:Clone a laptop hard drive from an external case to an internal hard drive

Read other 6 answers
RELEVANCY SCORE 41.6

Hello,
I am trying to move all my files from my computer to my new external hard drive, but whenever I try and move a file over 4 GB in size i get this error message...
"The file is too large for the destination file system"... anyone know how I can get around this so I can move those files over?
 

A:Problem transfering large file from hard drive to external hard drive

Get ahold of some software that will break up the file into chunks.
 

Read other 1 answers
RELEVANCY SCORE 41.6

Hey guys, I was working with my grandfathers computer. The computer would not boot, it kept getting the BSOD with "Unmountable Boot Volume" At the top. Annoyed, I decided I was going to just back up whatever files were on it (Just his favorites, he has absolutely no documents or anything else)..by plugging his HD into my home PC as a slave and copying them to my flashdrive. Then I would reinstall XP Home on his Desktop, and use the flashdrive to put back his files...Sounds easy enough right? NO!!!!.....Problem is, his user account on the computer (Ralph), was Password Protected so now when I try to access any of his files (using Windows 7) I get a message saying Access Is Denied. How do I get around this. It is not possible to boot his old computer to take off the password. Are his files recoverable?
Thanks for any help!

A:Recovering hard drive files from unbootable, password protected hard drive?

You don't have to do all that to overcome an unmountable boot volume error...try running chkdsk /r command on the drive.

Start/Run...type chkdsk X: /r (where X is the drive letter assigned by XP and with spaces between k and X: and X: and /) and then hit Enter.

Louis

Read other 1 answers
RELEVANCY SCORE 41.6

Windows XP Professional Service Pack 2 (build 2600)
2.20 gigahertz Intel Pentium Dual
64 kilobyte primary memory cache
1024 kilobyte secondary memory cache
WDC WD1200BB-00FTA0 [Hard drive] (120.03 GB) -- drive 0, s/n WD-WMAET2099978, rev 15.05R15, SMART Status: Healthy


Hard drive #1:
Just a few weeks ago my hard drive started clicking and suddenly my system froze. The drive wasn't dropped, bumped, or anything like that. It was fairly new as well. I was having some issues accessing my files AND I couldn't access the internet through any browsers. I was connected, could play internet-using games, but got no reply from websites. I decided to reformat. Well, that didn't go so well. Reformatting did not fix the freezing issue nor did it fix the internet issue. I attempted to reformat the partition on C but it simply wouldn't let me.

Hard drive #2:
I pulled out a newish hard drive and formatted it, installed my applications and continued on my way. Everything was working great, until a day later when the hard drive AGAIN froze in the middle of a session and this time I couldn't even boot. I was getting a boot error that mentioned not receiving a boot file name. I went into the windows repair console and did a chkdsk which turned up a few errors (and attempted to recover them I assume). I could now boot, but random freezing would still take place now and then and EVERY DAY I have to access the repair console due to boot errors. Almost every other attempt to boot resul... Read more

A:Multiple hard drive boot errors, hard drive clicking, and freezing

Try installing another operating system onto the disk and seeing if that crashes as well. If it doesn't you probably have a bad Windows cd. I suggest trying Kubuntu, a version of Linux meant to look somewhat like Windows (You can click here to skip directly to the download page). Just remember to actually install the thing. Most Linux operating systems can be ran directly from the cd without any need to be installed onto a hard disk. There's usually a program on the desktop that will install the system for you. If it runs properly for a week or two, get a new Windows disk. If it crashes just as much as Windows did, get a new computer.

Also, how much RAM does your computer have? If it's very low (256-512 megs or less) it can sometimes cause these kinds of crashes too.

Read other 2 answers
RELEVANCY SCORE 41.6

Hi,

I am in the process of doing a clean re-install of Windows XP for Home on my PC. I have 3 hard drives:

c: 200gb Maxtor SATA drive - bootable with Windows XP (existing Windows install)
d: 20gb Maxtor IDE drive - non bootable data drive
g: 160gb Maxtor IDE drive - bootable with the clean install of Windows XP for home on it

Windows is not seeing all the sizes quite right yet but I will tackle that when I have solved this major problem that follows:

If I boot from the C drive - I have no problems at all. Windows will see all the different drives as it should do, I can access them all and they all work fine.

When I come to boot the clean install on drive G windows changes the drive letters - G becomes C, D remains as D but the 200gb Maxtor SATA drive isn't seen at all and might as well not exist.

Disk Management within Windows is no help as it can't see the drive, Maxtor software MaxBlast 4 is also no help as it can't see the drive on this install either.

I have checked and rechecked the BIOS but have pretty much discounted any issues here as it clearly shows all 3 drives and all 3 drives are listed on boot up. It's just when Windows kicks in that I have the problem.

I guess it's a simple setting somewhere, but I am pulling out what little hair I have left trying to think what it is - so any ideas would be very gratefully received.

Thanks in advance and kind regards

Stuart
 

A:Hard Drive Bootup Problems, Help required - Windows not seeing new hard drive Options

Hi
This is what I would do to enhance performance and storage strategy:

1. Use the 20g for the os and housekeeping utes such as av, spyware, etc only, nothing else goes on that drive.
2. Use the 160g for apps installs.
3. Use the 200g for data.

This might get you past the bios/firmware/os/drive letter issue and make better use of the drives. The 20 isn't really good for storage anymore, but would be great for an os/system ute drive. It's performance is less than the other drives, but that's ok, most of the os will stay in ram anyway after boot, you won't make any real diff having a faster os drive.
You might want to place a pagefile on each drive so pageing can occur concurrently too.
 

Read other 7 answers
RELEVANCY SCORE 41.6

I have a customer's Satellite L305D S5895 laptop. This was shipped to me by the customer who tried to install Windows XP Pro, Vista and none would install. He said he tried all installation CDs he had and finally gave up on it and shipped it to me.

When I got it the partition were deleted so I tried to install Win 7 and when I do doing a custom install I get an error saying the hard drive can't be formatted on disk 0 or it will give an error that no hard drives were found.

I reset the bios to default and no matter what I do it won't format or find the harddrive. I was going to upgrade the bios but the only way I found to upgrade the bios is after windows is installed. There is no way to make changes to the bios for settings that would have to do with the hard drive. This has a Toshiba MK2546GSX (S1) hard drive.

When installing Win 7 I get the normal windows, "windows is starting", "Select Language", "Select System", "Type of install", "Custom Install", "Delete partitions", "New Partitions", "Format", then the error message "Windows cannot format a partition on disk 0. Error: 0x80070057"

This happens regardless what system I try to install. I've tried two different versions of XP, one of Vista and 3 Win 7 and each time a different install CD.

System Specs
AMD Turion (TM) 64 x 2 Mobile CPU
CPU Speed 2.00 GHz
Toshiba MK2546GSX (S1) hard drive
Pioneer DVD-RW DurkD08l... Read more

A:Solved: win 7 can't find hard drive or can't format hard drive on clean install

Read other 16 answers
RELEVANCY SCORE 41.2

I am having a serious problem with my pc.Windows disk is showing me these following errorsBoot sector of the hard drive disk is damagedBad sectors on hard drive or damaged file allocation tableRead time of hard drive clusters less the 500 msHard drive doesnt respond to system commands40% of hdd space is unreadableWhat does this mean and can I fix itI cannot access my documents folder or other programs Any Help would be greatI tried the defrag thing but it didnt workEdit: Moved topic from XP to the more appropriate forum, at the recommendation of forum staff. ~ Animal

A:Critical Error Hard Drive not found. Missing hard Drive

When you say "Windows disk". Can you give a little better description of just what\where the warning message is coming from?

You "tried the defrag thing but it did`t work".

Where did you go to access the defrag? What does "it did`t work" mean?

The reason I am asking these questions is not to give you a hard time. There is a virus going around that is very similar in it`s behavior.

I am just trying to find out exactly what it is we are dealing with.

Read other 11 answers
RELEVANCY SCORE 41.2

I recently formatted my c drive and now i am reinstalling all the software. I keep all the setups of software in my external hard drive. For installing the software I coy the setup folder of the required software on my laptop, then install it.

Is straightaway installing the software by accessing the external hard drive okay? Does it make any difference in the installation time or any reduction in life of hard disk performance.

Or should I always install through my laptop hard drive?

I am running windows 8.1 pro

A:installation software from external hard drive or internal hard drive

Your method is as good as any. If it works, keep doing it.

Read other 1 answers
RELEVANCY SCORE 41.2

Had this laptop for about 6 years, had a few issues in the past, but nothing major like this. After, I ran a system dianostic, the result shown that the Hard drive short DST failed. Not totally sure how to do a recovery, I do have the Recovery Discs, so I searched up how to run the discs; turned on the system- press f11-  window loading files- window starting- then it just stuck on a window blue screen with nothing but the cursor. Can I even use the Recovery Discs? I want to replace the old HDD with a new SSD, but I'm not sure if I have to install a new OS or can I recover the old hard drive OS and transfer to the SSD?

A:Hard Drive failure (Hard Drive Short DST Check: Failed)

DST:Fail means  the hard drive has failed and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail laptop SATA hard drive can be used. Just be sure to get one of at least equal capacity as the original in order to use Recovery Discs. It can be larger, but not smaller capacity.For instance if you have a 500GB hdd you could use a 750GB hdd but not a 320GB hdd.

Read other 1 answers
RELEVANCY SCORE 41.2

In summary:  

At the boot screen,
Port 0 (Drive D) is one Size, but then when windows opens fully and it is a
                    DIFFERENT SIZE
Boot screen is entirely different to the Disk Management Screen (And Windows Explorer screen)
___________________________________________________________________________________


In detail :


'Disk Management picture' - text version :
        Disk 0 - Drive (D)     223.57 GB    (same size as Port 4 - my
1st Priority Boot device - SSD in boot screen )
        Disk 0 -
        Disk 1 -    3 partitions    -->    Acer C   84GB free



'Boot Screen picture' - text version :

RAID Volumes
ID     Name             Level                          
Strip      Size             Status                    Bootable
0       Volume 0  &n... Read more

Read other answers
RELEVANCY SCORE 41.2

I just installed a brand new Western Digital Hard Drive 160 gig. I partitioned it with FDISK, then formated, then did a clean install of windows XP. Everything was fine until after i finished the installation, and i tried to connect my old maxtor 20 gig so i could transfer some files over, and the computer stopped reading both hard drives. When i start it up, the computer can't boot from either drive. I've tried disconnecting each of the drives and only booting with one connected, with no luck. I also tried changing the gray strip, I can't remember what its official name is, but that didnt help either. When I go into BIOS and let it auto detect my drives, It wont recognize either of the drives.
 

A:New hard drive installed sucessfully, now my computer cant find any hard drive

Read other 11 answers
RELEVANCY SCORE 41.2

In windows 7 my external hard drive does not show as a back up location.  When I go to system image, the box for what items I want to back up also has the ext drive checked. I do not want to back up the external hard drive but it will not uncheck.,
(faded lettering) I believe this is why I cannot back up my computer to it.  How do I get the back up from including the external hard drive? <input id="39f7f89d-082d-4e34-8bd3-a03da4f8d21c_attachments" type="hidden" value=""
/>                



|







                       





           




                           
                       
                   









0                             &nb... Read more

Read other answers
RELEVANCY SCORE 41.2

Hello, I just got a new Dell Dimension E521 with Vista as the operating system. Vista Stinks! For most programs, including video and audio from XP Service Pack 2 Vista doesn't recognize drivers that were fine with XP Service Pack 2.
Even Sonic and Roxio, which are installed on the damn thing give these same problems.

My internet connection is also no better at all and was outright disabled with a message "something has caused Microsoft Internet to stop working" after I tried
to install basic version of Zone Alarm.
Then on reboot it says "unauthorized change made to your license, you must verify your software online". This message come up before the desktop appears and this screen is frozen whether you choose the "verify" or "cancel" option.

Couldn't shut down by any means either, including Control Alt Delete, it wouldn't bring up that window. Had to literally pull the plug and reboot into Safe Mode where I uninstalled Zone Alarm and a couple of other functions that worked perfectly in XP2.

Then I was able to re-boot normally, the message did not come up again.

I hate Vista. Not interested in any "fixes", not worth the trouble. The only fix for Vista is a sledgehammer to the drive!

My hope is this: can I get the hard drive removed and replace it with a clean hard drive that has XP sp2 on it, or am I stuck with this P.O.S. Operating System?

The computer in question is a brand new Dell Dimension E521, 2.0 GH... Read more

A:Solved: Can Dell hard drive with Vista be replaced with Hard Drive XP?

Read other 8 answers
RELEVANCY SCORE 41.2

Hello guyz,
pliz help me with the steps involved in upgrading or replacing an MFM hard drive with IDE-class hard drive
 

A:STEPS TO UPGRADE/REPLACE an MFM hard drive with an IDE-class hard drive

Hi kfkaggwa, and welcome to TSG.

Any chance the motherboard has and IDE controller built in? If not, what kind of expansion card options does it have?
 

Read other 1 answers
RELEVANCY SCORE 41.2

envy m7-j010dx hard drive died. i installed new hard drive and it suddenly went into some kind of failure & windows 10 keeps trying to boot then goes into automatic repair and fails and the cycle starts over.

Read other answers
RELEVANCY SCORE 41.2

hi .
i have a Compaq nx 7400 .
i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .

im stuck and i dont know what else to try . anyone had this problem before .?

Thanks for any help .
very strange .
Timo
 

A:Solved: new hard drive xp , new install, doesnt find hard drive

Read other 7 answers
RELEVANCY SCORE 41.2

my hard drive crash and i just bought a new hard drive. but i dont have a windows cd only product key on my desktop case.how can I install windows on my new hard drive?

A:hard drive crash... install windows on new hard drive withou...

Galilee Hello;Allow me to welcome you to the HP forums!I read your post about wanting to restore your PC and wanted to help -- but need more information. Your PC did not come with Win10 preinstalled, so if you were to order HP Recovery Media and use that, it would restore the original operating system, drivers, and HP utilities.  I presume this is NOT what you want, right? So, while you can make Win10 media to recover your PC, it would be a clean-install and nothing would be preserved. You can make such media using this tool: Installing Windows 10 using the media creation tool - Windows Help Note that when you go do download and build install media, the tool defaults to matching what is already installed on your PC (as in, Home for Home, 64-bit for 64-bit).  While you CAN change these settings, do NOT. If you do, the resulting media will be different and will force you to enter a NEW product code! Good Luck 

Read other 1 answers