Over 1 million tech questions and answers.

blue screen error multiple times from past 2 months

Q: blue screen error multiple times from past 2 months

hi,
i am new here
i have been getting bluescreen error from past months and i have donr almost everything to resolve it but it still persists...
i have given it for reformatting and the dell service put it under testing for 1 day but couldnt find the bluescreen..
i have also reinstalled windows in another partition but it occurs in that too..
it appears every morning after using my comp the night before.

RELEVANCY SCORE 200
Preferred Solution: blue screen error multiple times from past 2 months

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: blue screen error multiple times from past 2 months

Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation. Yours is from 2010. I would re-install the newest.

Read other 1 answers
RELEVANCY SCORE 84

Thats right, ive gotten BSoD 41 times in the past 5 months (Since I got my computer) Im pretty mad as it seems to happen while playing Minecraft or while web-browsing (witch are the 2 things I do most ) but it has happened right on start-up. It would be so great if someone here could help me out, and finally get this problem resolved. Thanks in advance . ~Happiness1
Questions:
? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? x64
? What was original installed OS on system? Windows 7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Full Retail Version
? Age of system (hardware) Around 5 months.
? Age of OS installation - have you re-installed the OS? 5 months (never re-installed)
? CPU: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz
? Video Card: NVIDIA GeForce 9500 GT
? MotherBoard: Board: Intel Corporation DG41WV AAE90316-102
Serial Number: BTWV104006QE
Bus Clock: 266 megahertz
BIOS: Intel Corp. WVG4110H.86A.0015.2010.1111.1718 11/11/2010
? Power Supply - brand & wattage: I dont know :/ (Cant remove it)
? System Manufacturer: Custom built
? Exact model number (if laptop, check label on bottom): Custom built

A:BSoD... 41 times in the past 5 months.

Hi -

Probable issues with RAM are a likely cause.

Run memtest86+ - http://www.techsupportforum.com/2863029-post5.html

Before you run memtest86+. . . .

- remove Daemon Tools/ Alcohol 120

- Run the Driver Verifier -- http://www.sysnative.com/0x1/Driver_Verifier.htm

I see several old drivers in the dumps. If BSODs are software related, D/V can help find the culprit.

Regards. . .

jcgriff2


`



BSOD SUMMARY

Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\091211-22245-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Mon Sep 12 15:16:32.395 2011 (GMT-4)
System Uptime: 0 days 1:18:32.112
Probably caused by : win32k.sys ( win32k!SURFACE::bDeleteSurface+3c8 )
BUGCHECK_STR: 0x1a_403
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: iexplore.exe
FAILURE_BUCKET_ID: X64_0x1a_403_win32k!SURFACE::bDeleteSurface+3c8
Bugcheck code 0000001A
Arguments 00000000`00000403 fffff680`00027b78 ba500000`a2c62867 fffff680`00007b78
BiosVersion = WVG4110H.86A.0015.2010.1111.1718
BiosReleaseDate = 11/11/2010
SystemManufacturer =
SystemProductName =
MaxSpeed: 2930
CurrentSpeed: 2926
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\091211-15428-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
... Read more

Read other 7 answers
RELEVANCY SCORE 79.2

Hi there!
 
So as the title suggests, I've been having multiple BSOD's over the past few months that appear to be getting more frequent. I'm not sure if they're related as some of the error codes are different while others are the same. Hopefully you guys can help me here.
 
I'm going to be posting the BlueScreenView info on each as well as providing a link to the minidump file via Mediafire.
 
 
-------------------------BSOD 1--------------------------
Date: 1/13/15
 
Bug Check String: SYSTEM_SERVICE_EXCEPTION
 
Bug Check Code: 0x0000003b
 
Parameter1: 00000000`c0000005
 
Parameter2: fffff800`02e79c60
 
Parameter3: fffff880`0b36bf90
 
Parameter4: 00000000`00000000
 
Caused by Driver: dxgmms1.sys
 
Caused by address: dxgmms1.sys+c0a1
 
Crash Address: ntoskrnl.exe+75bc0
 
Minidump link: https://www.mediafire.com/?ba7i017yp33fn40
 
-------------------------BSOD 2--------------------------
Date: 5/8/15
Bug Check String: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code: 0x000000d1
Parameter1: 0000001d`684b4562
Parameter2: 00000000`00000007
Parameter3: 00000000`00000001
Parameter4: fffff880`04bc39f7
Caused by Driver: nvlddmkm.sys
Caused by address: nvlddmkm.sys+fe9f7
Crash Address: ntoskrnl.exe+76e80
 
Minidump link: https://www.mediafire.com/?ts1m9m3668dl31f
 
 
-------------------------BSOD 3--------------------------
Date: 7/4/15
Bug Check String: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug Check ... Read more

Read other answers
RELEVANCY SCORE 78.4

Hi there!

So I've been getting multiple BSODs over the past few months during general use. I've gotten several different stop error codes that I will list below, as well as uploading the zip file as per the posting instructions.

System service exception
Driver Irql not less or equal
Kmode exception not handled
System thread exception not handled
Page fault in nonpaged area,

Any and all help is very appreciated! I've tried updating drivers and running memtest, but the problems still persist.
Thanks in advance!

A:Multiple BSODs over past few months during general use.

Hi Salrion,

Welcome to the 8forums.

It appears I cannot read the latest dump file, this could be caused by hardware damage. I think the hard drive might be causing this.
The 2nd most recent dump file says there might be memory corruption.



Diagnostic Test

RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums


   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.



Diagnostics Test

HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums


   Note
Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk Disk Check - Windows 7 Help Forums

Read other 5 answers
RELEVANCY SCORE 78.4

i know i need more info on my computer posted...i need to find out where to find it and then i'll post it...

this has been happening for MONTHS!

it was crashing hard before...the whole system would lock up. every day. several times a day. blue screen. error message the same every time.

my husband wiped the drive, and i started from scratch and STILL it blue screened.

took it to a place to fix, they ran it for 3 days and not once did it blue screen! they told me that they thought it could be the printer, that i should try keeping the printer unplugged and see if that solves it. seemed odd, but ok.

oh and i told them where the file was that had the error message, but i got the feeling they never even looked at it. and frankly, their idea of it being the printer seemed really ludicrous. but i did it and it did indeed seem to work because it didn't happen anymore. for a couple months.

well now it just started again.

this time its a shorter time...don't know if something got reset somewhere (i didn't do it) so that it instantly restarts when it crashes...and the error messages are now mini-dumps, so maybe its a smaller crash, i don't know. i'm not knowledgable on this stuff.

but here's the error message:

BCCode : 9c BCP1 : 00000004 BCP2 : 80546E70 BCP3 : B2000000
BCP4 : 00070F0F OSVer : 5_1_2600 SP : 3_0 Product : 768_1


same as it was before, months ago...

and i should say that we did run memtest on it and it found no errors.

i've googled thi... Read more

A:blue screen multiple times a day

I did some searching on the web. One cause can be a faulty RAM module. Below is a quote from another site:


Quote:




I ran Vista and Windows 7 before this. And it seems the problem has ceased. I removed the RAM then put it back in and have not encountered a problem. Maybe one of the modules had a bad connection and was causing that problem. But if that was actually the problem, who knows. I will find out if I get another error.




Again, it points to a RAM issue. It could be one of your modules is not fully "seated" into place. There is a little white locking tab on each end. If that is not in the upright position, then the module is not fully seated.

Read other 1 answers
RELEVANCY SCORE 77.6

Everything was working fine when one day I started getting blue screen of death. I was on Windows 10 at the time and thought it might have been something wrong with Windows 10 since I had heard of blue screen issues with Windows 10. So I downgraded to Windows 7, and everything was working fine when I blue screened again. I am just wondering what the probelm is and if it has a solution. I am somewhat experienced with computers and have never had an issue like this before. (I keep crashing while playing games and even while watching videos which might help)

A:Blue screen of death, multiple times

I just thought about something. The blue screen has been happening since I updated my graphics driver.

Read other 1 answers
RELEVANCY SCORE 76.8

· OS - Windows 7 SP1 64-bit (Original OS) - User installed/Custom Built Desktop (Not OEM)
· 2.5 Years Old System, built Aug 2013 (All original components)
· Installed Windows 7 on Aug 2013 and reinstalled/reformated with same Windows 7 on April 4th, 2016.
 
· Intel i5-4570
· EVGA GTX 650 Ti 1GB
· MSI H87-G43
· SilverStone ST50F-ES 500W
· Primary/OS Drive: Samsung 840 120GB SSD, Secondary: WD Blue 500GB 7200RPM, Tertiary: Samsung 850 EVO 120GB SSD
· G.Skill RipJaw 16GB (2 pairs of 2x4GB) (Bought original pair in 2013 and second pair late 2015)
 
Before the reformat/reinstall, I accrued similar BSOD error codes as attached. I'll note that the frequency of BSODs has gone down considerably since I reformatted/reinstalled (Instead of once maybe 5-12 hours of activity, now its closer to once per 24-30 hours).
 
I've run various versions of MemTest86 (As well as Window's Memory Diagnostic Tool) while swapping the sticks around, checking each pairs, different slots and different combinations, all of which have resulted in no errors. I'll be running MemTest again as soon as Driver Verifier is complete. I have run SSDLife on both SSDs with no errors in both SMART and file system integrity (I can include logs if need be), I'll be running health checks on my HDD but recent checks on both SMART and file system integrity (As of Dec 2015) came back clean.
I've checked my power supply under heavy load/gaming and while idle with both... Read more

Read other answers
RELEVANCY SCORE 75.6

I have just about had enough of my laptops small screen and I want my desktop with it's 23" monitor back in action to ease the strain on the eyes. Everytime I turn on my desktop I get the blue screen saying a problem has been detected. It then lists these codes. 0x0000008e (0xc0000005, 0x80551ae2, 0xb50ef4c0, 0x00000000). Can anyone help me figure out how to get my pc in working order again. I have started in safe made before without any luck at fixing anything. I haven't tried it in months but I'm pretty sure I can't access the internet in it's current screwed up state. Is there a way I can fix it myself or will I have to take the unit in to be repaired. I have a lot of music and pictures that I really would like to be able to get back to using. Again I'm using my laptop now to access the internet so I don't know how I will be able to access it on the pc in question. I was told I should upgrade my memory but I put it off thinking I would just buy a new pc but that's not an option anytime in these hard times. Oh and hello all, this being my first post and all.
 

A:Desktop has been down for about 6 months now with blue screen and error messages

Can you please attach minidumps for analysis with your next post? You can find these in C:\windows\minidump.

Also provide us with complete system specs (including PSU type/model etc). Regards
 

Read other 14 answers
RELEVANCY SCORE 72.4

Operating system- Windows 10 64bit
original OS- Windows 10
Os is oem
Hardware age- 9 months old
Os age install- Not sure
Reinstalled the os- No i don't have a disk drive so the only way i could would be with a factory reset


cpu-i76700 3.4ghz
Videocard- Xfx rx 470
Motherboard-HP 799929-601 ENVY 750-1XX ODENSE INTEL DESKTOP MOTHERBOARD S115X
Power supply- Evga BQ series 850 watt

Manufacturer- HP
Model Number-Hp Envy 750-124

Desktop

PS:i cant figure out how to save the perfmon file and compress it so I copied and pasted it. Thanks for all the help
-Richard


Severity: Informational
Symptom: Missing Events in Event Log
Details: Investigate why 43% (19,334) events were lost during data collection. The settings for Event Tracing for Windows (ETW) maximum buffers and buffer size may not be optimal depending on which data sets are being collected.
Related: Event Tracing for Windows

Informational

Severity: Information
Warning: The average disk queue length is 1.033. The disk may be at its maximum transfer capacity due to throughput and disk seeks
Related: Disk Diagnosis

Basic System Checks

Tests Result Description
OS Checks Passed Checks for attributes of the operating system
Test Groups Tests Failed Description
OS Version Check 1 0 Passed


Disk Checks Passed Checks for disk status
Test Groups Tests Failed Description
SMART Predict Failure Check 1 0 Passed
Logical Disk Dirty Bit Check 1 0 Passed

... Read more

Read other answers
RELEVANCY SCORE 70.8

Since about 7 months back I've been experiencing a BSOD on my Toshiba Satellite C655D-S5529 laptop. It would happen upon logging into my account and would only stop if I booted up in safe mode. Other people use the computer too so I can't be quite sure what may have caused it but since this week it has actually booted up twice, including now, without being in safe mode and hasn't blue screened. The BOSD always returns though so I'm sure this time will be no different. I was wondering if anyone could help me resolve this issue as I would love to be able to use this laptop again. Any help is greatly appreciated.

A:BSOD for the past several months, Error 0x0000001E

Please follow fully - Blue Screen of Death (BSOD) Posting Instructions

Use the "Grab All" option.

Update your System Specifications with Speccy, and then copy this information into your System Specifications: Go to your UserCP, and then select Edit System Spec in the left pane. Copy the information from Speccy into the required fields. These System Specifications will then follow your every post.

Read other 9 answers
RELEVANCY SCORE 70.8

I'm getting Irql Not less or equal, Ive ran hardware diagnostic that comes with my windows ten and everything including my ram has passed. Computer is only 6 months old but its still possible its a hardware issue, Can I please have some help

Read other answers
RELEVANCY SCORE 70.8

I have had a few times the past few days when logging on to computer that it says it is recovering from a BSOD. BSOD occurred when noone was using the computer.

A:BSOD multiple times, noone using computer, more frequent past few days

Blue Screen of Death (BSOD) Posting Instructions

Read other 1 answers
RELEVANCY SCORE 70

Hi,

I have a dell Dimension 4600, which has given me so many problems throughout the years. When we got it, the thing ran great. This was a few years ago... A year or two ago the thing got a NASTY Virus, and ever since then it hasn't worked because of hardware and software problems. I pretty much decided to give up at that point and the thing has been sitting around collecting dust.

My dad thought it was the memory, and so today I carted the computer up into my room, set it up and put in a new memory card. It didn't help, My computer goes in circles when trying to boot up, until the blue screen pops up.

It cannot boot from the hard drive, and I get the message

"press F1 to retry boot, F2 for setup utility"

F2 takes me to the utility, but as far as I know I don't want to change anything here at the moment.

if I press F1 it pops up the same message.

So I tried Booting from the CD and Reinstalling from the CD. Neither worked and both of these result in the Blue screen of death. For the install, the blue screen would come up at the third bullet point which I believe is "preparing installation."

***STOP: 0x0000000A (0xCDCDCDCD, 0x00000002, 0x00000001, 0x807d600f)

WhenI continue the current upgrade I get "IRQL_NOT_LESS_OR_EQUAL"
the Tech info is:
***STOP: 0x0000000A (0x0a130013, 0x00000002, 0x00000000, 0x807d5ff9)

I am getting a few other blue screens but I don't know what the say, But as far as I know, everything I ha... Read more

A:Blue screen error durring instal of XP. Virus problems in past.

Read other 16 answers
RELEVANCY SCORE 69.2

hi there,
i sometimes experience the blue screen crash. i get this with both windows vista and xp on my sony vaio computer. i have no idea what it means but i have been taking lots of snapshots when i see the error. sometimes i get bad_pool_caller, sometimes NON_PAGE_FAULT and the error code seems to be the same
i ran a windows memory diagnostic from microsoft and it says theres nothing wrong and everything "passes" so i am not sure whats going on.

I usually find that Utorrent triggers this error after a long period of time and sometimes Internet Explorer.



 

A:Stop error with blue screen at random times

i got the error again last night, this is the error report that was going to be sent to microsoft

BCCode : 50 BCP1 : BAD0B148 BCP2 : 00000000 BCP3 : 805BB452
BCP4 : 00000002 OSVer : 5_1_2600 SP : 3_0 Product : 256_1
C:\DOCUME~1\Gary\LOCALS~1\Temp\WER69ca.dir00\Mini100608-01.dmp
C:\DOCUME~1\Gary\LOCALS~1\Temp\WER69ca.dir00\sysdata.xml
 

Read other 1 answers
RELEVANCY SCORE 69.2

Once when I was on Internet Explorer, some entertainment site. The second time during the final step of Wins XP shutting down, after you hear the little Wins music.
I haven't installed any new hardware in a long time or updated any drivers. I recently installed Nero and DVD Fab and have been playing around with that.
PAGE_FAULT_IN_NONPAGED_AREA
Check to make sure any new hardware or software is properly installed....
STOP: 0x00000050 (0x90563960, 0x00000000, 0x805CFB7A,....)
Beginning dump of physical memory....

WINS XP SP 3
IE 8
 

A:Blue screen error two times...freezes computer

Read other 14 answers
RELEVANCY SCORE 68.8

Hello all,

Over the past 6 months or so I have been getting random BSODs with no obvious symptoms of what is causing them.

They started happening last September after I got back from the Summer. To begin with I tried to diagnose the problem following various guides to try and work out what could be causing them. I did the following:
Memtest
Reg check
Driver Verifier
Updated Drivers
Checked for any physical damage on hardware
Tried restoring

No matter what I did I could not either fix the problem or find the cause of the problem. The main reason for this was the "ntoskrnl.exe+XXXXX" would appear each time on each crash, and searching online I could not find a definitive reason or answer to the crashes.

So I decided in the meantime to live with the possible chance that I would BSOD every now and then. For the most part this was fine as they became less frequent.

Then came today. I've had 3 BSOD in one day and now its starting to irritate me. Knowing that my previous efforts to try and find a solution were to no results, I just don't know what to do. I'm getting the point that I might just rip out all my hardware and start fresh, but that won't be for another 3 months or so.

So here are the .dmps from September till now. Looking at them in BlueScreenView the Caused Driver and Address are all different, there are some common patterns such as the "Qualcomm Atheros Driver" I did update this but ended up making the problem worse, as it made m... Read more

A:Random BSOD over past 6 months. Error 0x000000d1 ntoskrnl.exe+74ec0

Update Atheros LAN driver from http://www.gigabyte.in/products/prod...px?pid=4144#dl

Code:
BugCheck D1, {28, 2, 0, fffff880018fc360}

*** WARNING: Unable to verify timestamp for L1C62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for L1C62x64.sys
Probably caused by : L1C62x64.sys ( L1C62x64+6a5f )

Followup: MachineOwner
---------

Code:
Image name: L1C62x64.sys
Timestamp: Wed Apr 25 10:37:17 2012 (4F978685)
One more thing is there .... Agnitum Firewall. I dont know what is it, but as it is contributing to the BOSDs, it should be uninstalled. Probably it is branded as Outpost.

Code:
fffff880`03319e68 fffff880`04d84738Unable to load image \SystemRoot\system32\DRIVERS\afwcore.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for afwcore.sys
*** ERROR: Module load completed but symbols could not be loaded for afwcore.sys
afwcore+0x59738

Code:
fffff880`03319d48 fffff880`04d1d000Unable to load image \SystemRoot\system32\DRIVERS\afw.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
afw
Let us know the situation after doing these two.

Read other 3 answers
RELEVANCY SCORE 68.4

Hi there ladies and gents. I was hoping all of you would be kind enough to assist me in this problem I've been having recently.

Basically the main problem is that whenever my computer is left running for any given amount of time, them I will get a system restart. I would be transferring a large amount of files from a hard drive to a backup overnight, only to find myself on the login screen and half of the files transferred next morning. Or I'd be playing a game, surfing the web, even the simplest of tasks, it doesn't matter.

I am currently running Windows 7 64-Bit (A perfectly legal version too lol)

Here are the problem details of the blue screen. I am very certain it is the same exact problem every time.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C000001D
BCP2: FFFFF80002ECFFCD
BCP3: FFFFF880021F5FB0
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\021611-32510-01.dmp
C:\Users\Tyler\AppData\Local\Temp\WER-50887-0.sysdata.xml
There are my System Specifications:

OS Version: Microsoft Windows 7 Ultimate , 64 bit
Processor: AMD Phenom(tm) II X6 1090T Processor, AMD64 Family 16 Model 10 Stepping 0
Processor Count: 6
RAM: 11262 Mb
Graphics Card: AMD Radeon HD 6900 Series , -2048 Mb
Hard Drives: C: Total - 198178 MB, Free - 84513 MB; D: Total - 953867 ... Read more

A:Blue Screen Error at Random Times/ System Restart

Does the system reboot when it goes instand by mode or after it resume from stand by.

Do you see any errors in the event logs?
 

Read other 3 answers
RELEVANCY SCORE 66

When i using the window 7 all just will be fine. But when i restart the pc , normally it will direct to the Blue screen.

Pros : AMD Phenom II 550BE
Mobo : Biostar TA790GX A3+
Ram : OCZ 2GB X 2 Platinum
OS : Window 7 64Bit

Checking RAMTEST for 300% no error as well.

The Normally Error Codes =
PAGE_FAULT_IN_NONPAGED_AREA

Sometimes no mentioned any Problem Codes.

I check My Event Viewer.
I saw Many [ Around 10000 Warning ] About this.

Code:
Log Name: System
Source: Microsoft-Windows-WHEA-Logger
Date: 8/7/2009 5:53:10 AM
Event ID: 19
Task Category: None
Level: Warning
Keywords:
User: LOCAL SERVICE
Computer:
Description:
A corrected hardware error has occurred.

Reported by component: Processor Core
Error Source: Corrected Machine Check
Error Type: Cache Hierarchy Error
Processor ID: 1

The details view of this entry contains further information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/w.../08/events/event">
<System>
<Provider Name="Microsoft-Windows-WHEA-Logger" Guid="{C26C4F3C-3F66-4E99-8F8A-39405CFED220}" />
<EventID>19</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2009-08-06T21:53:10.222511200Z" />
<EventRecordID>21694</EventRecordID>
<Correlation ActivityID=&q... Read more

A:Multiple Blue Screen Error Help Please

How long ago did they start - i.e., what is the date of the 1st event?

How old is your system?

Read other 4 answers
RELEVANCY SCORE 65.6

Hi now since Yesterday i've gotten the Window's 8 Blue screen saying the Error "MULTIPLE_IRP_COMPLETE REQUESTS" now i got this multiple times yesterday, even got the "BAD_POOL_HEADER" Searched around and found out this was probably a Driver Error and updated my Drivers. Only my Video Card needed an update and after Installing the latest driver and restarting my Computer everything seemed fixed. But today i got the same IRP Error again.

I have an Busted up USB port and thought that maybe the Driver was confused about it and made the error so i Deactivated the specific driver to that Port, But after getting the same IRP error and restarted the comp again i got the "IRQL_NOT_LESS_OR_EQUAL" error at startup

Now my i comp started normally and i'm waiting for the next Error so i don't know what do to.

Please Help.

Btw i don't know an awful lot about these things but i found out that there's some error Logs (C:/windows/minidump) but i don't know a program that'll make them readable.

I'll put them Here if anyone else can.

A:Windows 8.1 Blue Screen, Multiple Error's

Anyone?

Read other 4 answers
RELEVANCY SCORE 65.6

Hi guys, so I've recently completed my first new build, was very excited about, especially because hardware wise it is a big step up from the pc I've been working on for the past few years. Seeing as it is a new build it didn't have an original OS, I installed Windows 10. A few hours into properly using it for the first time I get the Kernel_security_check_failure blue screen error. After restarting I update all my drivers, everything works for roughly an hour, then I get the driver_irql_not_less_or_equal error. I wasn't entirely sure on how to try to fix that one and last but not least I got the system_service_exception error not too long after that. It's strange because I can boot up the PC just fine and always use it for at least half an hour before the blue screen restarts it. Thanks for the help beforehand.

Read other answers
RELEVANCY SCORE 65.2

Hi. I'm working on a friend's computer. The computer has been coming up with the blue screen stop error. It will rarely load fully into windows, safemode or not, but it always restarts within a few minutes of loading the desktop. I think it loads into windows about each 15x I restart the computer, approximately.
It has Windows XP SP2 French Edition, so I've been unable to fully decipher the error messages, although the error codes are all the same. There have been multiple error codes:

IRQL_NOT_LESS_OR_EQUAL
STOP: 0x000000D1 (0x0000000D, 0x00000007, 0x00000001, 0x825AB5C?)

STOP: 0x0000008E (0xC0000005, 0x805EF530, 0xBACC2e7C, 0x00000000)

STOP: 0x0000000A .....

PAGE_FAULT_IN_NONPAGED_AREA

0x00000050 (0xBA063F78. 0x00000000, 0x8056E9EC, 0x00000000)


There have been no new installations of hardware or programs.

I can not get it to boot onto the windows disc.

Help!?

A:XP - Blue Screen Error - multiple error codes

are you trying to use the original XP disc that matches the load of XP currently on the machine.....? have you gone into the Bios to adjust the boot sequence to tell it to boot from CD rom first and force it to boot from the CD? you say it will rarely boot into Windows XP .,,so sometimes it eventually will boot stabally into the Desktop?

Read other 9 answers
RELEVANCY SCORE 64.4

I have been having this BSOD now for about 6 month ...Tried new video card ....hard drive diagnostics etc ...Please help..

I have completely re-installed windows after formatting both hard drives and it ccurs several time whle installing windows .

Once windows is installed it is random...

A:Random Blue Screen now for 6 months ...

Hi Raticass.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Report back for any further BSODs after doing it.

Read other 3 answers
RELEVANCY SCORE 64.4

please can some one help
2 months ago I decide to build my own computer and i did it at the moment i just have windows vista 32 bit a month later i increased my memory ram to 8 gigs so i order a 64 bit vista since that day i installed vista 64 bit i been having a lot of blue screens with problems with the drivers i was able to fix most of the problems with the drivers and replace one of the memory rams but now my pc is giving me a blue screen every time i restart it or shut it off most of the errors that i get is technical information
first 0x0000007E and then 0x000000D3 next is 0x000000C1 then 0x000000C1
also went a play fsx my game shut down after 20 minutes

Processor: AMD Phenom IIx6 1090T Thuban Black Edition
Motherboard: Gigabyte GA-880GA-UD3H
Memory Ram: 8g (4 ADATA Gaming Serial) (4 CORSAIR)
Hard Drive: Hitachi 1tb
Case: InWin Ironclad
Video Card: Galaxy Gtx470
Power Supply: Cooler Master Gx750W
i have windows vista 64bits sp2

A:Blue Screen after 2 months of build

Hello,

Please start by running Memtest86: RAM - Test with Memtest86+ - Windows 7 Forums

If you get no errors, follow these directions: http://www.techsupportforum.com/foru...ta-452654.html

Read other 1 answers
RELEVANCY SCORE 63.2

Last week I was playing Tom Clancy's: The Division when the game unexpectedly crashed. I reloaded the game, played for a few more minutes, and then my entire PC locked up and then crashed to a blue error screen with a face stating that "Windows has encountered an error and needs to restart". My PC then restarted, and the HP Omen X Logo screen came on stating "Attempting Recovery Repair". The screen then would cut to another blue error screen, and the whole process would start all over again. When it would do this it would give me three different error codes each time a blue screen would come up. The order appeared to be random.The three error codes I would recieve are: "0xc0000145"  "0xc0000142"  and "CRITICAL_PROCESS_DIED" Again, this process of switching between error screens and the HP logo "Attempting Recovery Repair" screen would loop for about 5 or 10 minutes before ending with a completely black screen. My PC will not boot in Safe Mode and Factory Restore from the HDD partition ends up going to the aforementioned error screen loop. I contacted HP about my situation and they have sent me USB recovery media unit. However, when I try to boot from the USB to do a clean install I am again met with the same error loop. Any and all help would be greatly appreciated.

Read other answers
RELEVANCY SCORE 63.2

I have been getting multiple BSOD with several different error codes over the last couple of months. Thank you for you time and attention.

A:Multiple BSOD Error Codes Over A Couple Of Months

http://www.sevenforums.com/crashes-d...tructions.html

Read other 4 answers
RELEVANCY SCORE 62.8

So my computer is an Hp Pavilion a350e which is about 9-10 years old. I have persistently been getting BSOD for a couple months now. It has always occurred every now and then a year ago,but it only happened about 1 every couple weeks so I didn't pay much attention to that. Then it stopped for a few months and my computer was fine.

In April I decided to buy a 1gb stick of RAM from the recommendations of Crucial(compatible yes). I put it in my desktop computer and it ran well and fast for a month. Then In May started noticing I would get blue screen every week,then every day,then it turned consistently into as much as 5 times an hour. It really ticked me off...

Now,I have been told that BSOD is due to hardware problems. And I decided to check if the RAM was fault. First,I took out the new 1gb stick of RAM. Everything was okay until I experienced BSOD AGAIN! So I figured okay it isn't the new RAM's fault. So I put the new 1gb RAM in and took out the 512mb. Waited a bit and did normal internet use,and bam I get BSOD. I actually still have just the 1gb in and have been experiencing BSOD for the past couple days,anyways...I'm guessing it isn't the RAM's fault. I've tried both..

So what could be the problem? I've tried looking in mini dump folder and I see nothing. I do use CCleaner and clean the Registry every other day. I have tried countless system restores...and nothing. I need help...I have school next week and I need to use this computer for school work. I cannot rel... Read more

A:Blue Screen of Death has been happening for months..help. Very Complicated

One of the most vital items of hardware you haven't tested -- the hard drive.
All hard drives have a limited lifespan and will fail sooner or later, often causing BSODs or other persistent problems before they actually fail completely.

You can test the hard drive with the drive maker's diagnostic software. It's available in both Windows & DOS versions, and because your Windows is currently very unstable you need to download the DOS version otherwise the diagnostic software may not run properly if Windows crashes. The DOS version involves making a bootable CD from an ISO image file, then booting your PC from that CD.

You will first need to find out the make of your hard drive, then download the diagnostic software (remember, the DOS version) using the appropriate link at the top of this page: Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.

When you've downloaded the ISO image file, create a bootable CD with it using Nero or the free IMGBurn from here: The Official ImgBurn Website

Read other 6 answers
RELEVANCY SCORE 62.8

Hi,

I am receiving blue dump errors multiple times

Please help me.

I have attached relevant data

A:Blue dump errors occured multiple times

  
Quote: Originally Posted by ritadesai


Hi,

I am receiving blue dump errors multiple times

Please help me.

I have attached relevant data


Hi ritadesai
Ur minidumps points to memory_corruption,(probably caused from macfee?)
So for first step,
Please uninstall mcafee with McAfee Removal Tool - Free Download
Install MSE Anti-Malware, Virus, Spyware Protection | Microsoft Security Essentials
Run a RAM - Test with Memtest86+
---------------------------
Please post back with ANY results.

Read other 9 answers
RELEVANCY SCORE 62

5 months of Multiple BSODs on a brand new computer - driver or hardware error? Mini dump analysis help please.

Hi, I?m looking for anyone who can analyse mini dumps and help me determine the source of my problems.

The system has been giving me hell from the start. The problem often manifests in different driver and memory errors - To my level of understanding the errors seem to be fairly unrelated. When it runs well it?s awesome and it really performs. When it starts messing up, that?s it, it might BSOD on every start up 5times in a row and then start working for no apparent reason.

I ruled out: faulty PSU and faulty RAM, and system always runs cool, (the hottest component being the fanless graphics card).

I have also run extensive tests on system hard drive:
Seatools returned no errors after firmware upgrade and 2 long tests. However DiskCheckup keeps changing its mind out predicted TEC date: it jumps from Jan 2010 too Aug 2011 either of which is unacceptable and well within manufacture warranty

Reinstalled windows countless times with different installation CDs

So that leaves MOBO, CPU, GPU or maybe some software of driver issue.

I feel that it must be hardware related but I can?t work out what it is, on top of that the faults are often intermittent making trial and error testing unreliable. I have collected many minidumps now, but I can?t work out if they are related or not ? has my comp dozens of problems or just a couple with v... Read more

A:5 months of Multiple BSODs on a brand new computer - driver or hardware error?

Here are some of the older dmp analyses:
View attachment 50542



View attachment 50543



View attachment 50544



View attachment 50545



View attachment 50546
 

Read other 11 answers
RELEVANCY SCORE 60.8

Thanks for the previous help everyone, but I still can't get past the blue registry error screen when trying to start my kid's Dell Dimension 2400. I can't get into safe mode, a prompt, anything! Even Recovery Console will not cooperate. I had finally decided to try and reformat the HDD but I can't seem to even do that! Recovery Console wants me to select an installation, and as soon as I select C:\Windows, it's back to the ugly blue!
My tech message is:
***STOP: 0x00000051 (0x00000003, 0x00000003, 0x0000000, 0xE1181000)

The last sequence of numbers has changed a little each time I get there, but the other ones stay the same. No luck taking out the CMOS battery either. All it did was make me have to reset the time
HELP or I may have to call Dell, yikes! Thanks again!!!HELP, I can't get past the BLUE Screen!
 

A:HELP, I can't get past the BLUE Screen!

Read other 16 answers
RELEVANCY SCORE 60.8

Hi!

My mom was concerned about some error messages she was getting about low virtual memory while surfing the web on her laptop (Dell Inspiron 1000), so she wanted me to take a look. I ran the free Microsoft Live One Care Safety Scanner. It didn't come up with any viruses or anything, just a bit of temporary files to delete. A while after the scan, the screen went blue saying "A problem has been detected and windows has been shut down to prevent damage to your computer." I tried restarting, and that message now appears before I can even get into Windows. I tried restarting in Safe Mode, using the last known working configuration, etc but nothing has worked. Under technical information, it says:

STOP: 0x0000007E (0xc0000005, 0x81EAA562, 0xFA3CA7E4, 0xFA3CA4E0)

I was hoping I could get some advice? Thanks!

A:Can't Get Past Blue Screen

Hi and welcome to TSF please go to C:\Windows\Minidump
and copy the info to a folder name it minidmp, next right click on the folder and choose send to zip option, next use the go advanced button on your thread page, then the paperclip icon to attach the folder and upload the info someone here will then be able to run a debug and try to pinpoint the issue

Read other 7 answers
RELEVANCY SCORE 60.8

Yes I have done searches to try to figure out a fix to my problem, but all the ones that I have found contain users who were successfully get past the blue screen long enough to get online or do anything as a matter of fact.

on to my problem,

whenever I turn on my computer, it asks me what mode to start in, normal, safe mode, safe w/ networking, and safe w/ command prompt. No matter which one I choose, the blue screen pops up and then nothing happens. It doesn't begin physical memory dump or anything, it just sits there frozen. I do not want to do a full system restore because I foolishly did not back up my data. ANY help would be very much appreciated!

A:Cannot get past the blue screen

Try using the Last Known Good Configuration.To start your computer by using the Last Known Good Configuration feature, follow these steps: 1. Start your computer. 2. When you see the "Please select the operating system to start" message, press the F8 key. 3. When the Windows Advanced Options menu appears, use the ARROW keys to select Last Known Good Configuration (your most recent settings that worked), and then press ENTER. 4. If you are running other operating systems on your computer, use the ARROW keys to select Microsoft Windows XP, and then press ENTER.http://support.microsoft.com/kb/307852If this doesn't work and you have the installation CD for the operating system try using the Recovery Console.Note: You may need to change the boot order in the BIOS so that the CD-ROM is the first device in the boot order to be able to boot from the Windows installation disk.To run the Recovery Console from the Windows XP startup disks or the Windows XP CD-ROM, follow these steps:1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted.2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.3. If you have a dual-boot or multiple-boot computer, select the installation that you must access from the]Recovery Console.4. Whe... Read more

Read other 2 answers
RELEVANCY SCORE 60.8

i try to start my computer it just brings me to a blue screen error message ***stop 0x00000024 (0x00190203,0x867FE8D8,0xc0000102,0x00000000)then it just restarts and restarts loop my computer didnt come with a disk so i dont know what to do
i have phoenix bios
windows xp media center edition 2005
sony vaio model #PCG-8V1L
 

A:cant get past the blue screen

When you turn your computer on start tapping the F8 key. If this works select Last Known Good Configuration - Enter.

I searched your error at Microsoft Knowledge Base. You try.
http://support.microsoft.com/search/?adv=1

For me to get into System Recovery (back to factory settings) with my eMachine I start tapping the F11 key when I
turn the power on.

To call your computer manufacturer - Start - control panel - open System Icon - General Tab - Support Information
Their phone number should be listed here.
See if they will allow you to buy an Install CD
It worked for me. Been a long time, I may still have been under warranty.

For your next computer get an exterior hard drive and something like Acronis to back up your hard drive.
Even so that can fail. I have an extra hard drive that's loaded with the same operating system for
Windows XP and Windows 7
When my Windows XP and Acronis failed, I switched hard drives and ran Error Checking. Connected as a slave.
That corrected the hard drive that wouldn't boot.
Desktops are easier to work on.
 

Read other 1 answers
RELEVANCY SCORE 60.8

I haven't installed or downloaded anything new. Computer keeps trying to log onto Windows. I have tried Safe Mode, Last Configuration, F8, etc.. Nothing is working. Error Message is Stop 0X0000000A, 0X00000032, 0X0000001D, 0X00000000, Ox804FB69B
 

A:Cannot get past Blue Screen

You could try booting from the Recovery Console and running a Fixboot or a chkdsk /r.
 

Read other 2 answers
RELEVANCY SCORE 60.8

Helo there. The other day my computer went off a blue screen appeared and it jst shut down i switched it back on and it was fine for about 15 minutes then again blue screen and shut down. Now i cant get it past the boot sctreen becasue it just crashes on that screen/If im quick i can press esc to get to the switch screen where it says mem test ok then it crashes i cant get into bios or boot device. Thinking it may be a hardware problem I changed graphics cards still saem problem and I changed the PSU still same problem. I dont have a clue what is wrong with it as it was fine the other day here are the specs.
Packard bell Imedia 1702
Amd 64 3200
512 ram
180gb hard drive
128mb radeon 9200
Also i am running windows vista ultimate. Any help would be appreicated thanks tom.
 

A:Blue screen ,cant get past boot screen HELPPPPP

Read other 7 answers
RELEVANCY SCORE 60.4

Can't get Xp on Dell Diminsion 4600 to boot up. Boots to blue screen. Have tried repair from windows install disk... no go. Have used F12 to boot from cd. Have tried to boot from safe mode..shoots back to blue screen. I'd be willing to reinstall Xp if I could get it to work! Any suggestions??

A:xp won't boot past blue screen

What is the error that is displayed with the BSOD?

Also you can try downloading the setup disk to floppy's
and booting if you have a floppy drive on your Dell 4600.
http://support.microsoft.com/default.aspx?kbid=310994

Read other 1 answers
RELEVANCY SCORE 60.4

My computer does the start up, then gets to the blue screen and freezes, i've tried using my disks to do a system restore, but i wont even do that!!! anyone have and ideas of what we can try now??? any useful help is appreciated! thank you

A:start up then won't go past blue screen

Blue Screen as in BSOD?

If so, what is the bugcheck (STOP error)?

Regards. . .

jcgriff2

.

Read other 1 answers
RELEVANCY SCORE 60.4

The Z200 desktop stopped working. Now it's stuck on the blue HP logo screen.  It's not the harddrive, because I tried it on another desktop and harddrive works.  Any suggestions?

A:HP desktop can't get past the HP blue screen

Hello, Thank you for posting in the HP Support forum. Welcome ! Please, take your time and read this article. Follow the most appropriate step based on your issue:>> http://support.hp.com/us-en/document/c01884928or watch this video >> https://www.youtube.com/watch?v=i0mKux2T2DU   You might eventually need to use either Microsoft Windows System Restore  OR  HP System Recovery.Please,  use first System Restore and if this does not help, go to HP System RecoveryMore information and details how to use them >> http://support.hp.com/us-en/document/c01835735 >> http://support.hp.com/us-en/document/c01867418  (this option will let you restore your Windows and PC to factory default condition). Use as a last resort if nothing else helped.  Please, provide your feedback and let me know how this goes. 

Read other 1 answers
RELEVANCY SCORE 60.4

My Dell laptop is displaying the big, bad, blue screen we all are familar with; however, this time, I may be in trouble as it may mean permanent data loss...

After my laptop boots, it takes me directly to the screen, displaying: STOP: C0000218 {Registry File Failure} The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or alternate. It is corrupt, absent, or not writable. Beginning dump of physical memory Physical memory dump complete.

I did the only thing I know to do--boot from the OS disc. I hit "r" to repair the Recovery Console. From the Windows prompt, I type "fixboot C:"
I then agree that I want to write a new bootsector to the partition C:
Apparently, the new bootsector was successfully written.
I then "exit," it restarts, and I start Windows as normally, and I get the same blue screen.

I've also tried starting in "Safe Mode" but get the same screen.

Anyone know of any options I could try without having to do a system restore--that'd be terrible since I have a few things saved on my laptop I cannot lose.

Thanks so much!
--
Patrick

A:Non-recoverable past blue screen?

I would first try going to rrecovery console and at the command prompt type in chkdsk /r and then enter. There is a space after chkdsk before /r Let it run then at the command prompt type exit and get the disk ouit before you reboot.

Read other 1 answers
RELEVANCY SCORE 60.4

I have tried to factory reset by notebook HP 360 model 11-p120nr and it gets to 54% and then states your computer cannot be reset at this time. Ugh this just started and I've done everything

Read other answers
RELEVANCY SCORE 60.4

My computer (Dell Dimension 4550, XP Home) locked up & had to turn it off. Upon restart I get part way into boot and get the black & white screen with the 5 Windows start options. All options lead to a blue screen with the following Stop information:

0x0000007B(0xF8B4D528,0xC0000034,0x00000000,0x00000000)

I can find no way out of this screen other than turning off the computer. I am not technical but can follow directions. Thanks in advance for any advice you can provide.
 

A:Can't Boot and can't get past Blue Screen

Read other 16 answers
RELEVANCY SCORE 60.4

I have a dell xps 14z running on Windows 7. My laptop was running fine until I attempted to close windows Media Player, which froze up. I then tried to open a task manager which resulted in an unresponsive black screen. I used the power button to close my laptop and upon starting-up my laptop it went to a black screen which displayed "windows is loading files ". Then it briefly flashed the windows logo before sending me to a colorful blue screen with a flowery back ground and a moving cursor. Running in safe mode and trying the windows repair option results in the same ending. Any idea how to get my laptop running normally again, hopefully without loosing my files?

A:How can I get past a blue background screen?

Please follow the instructions posted here.

http://www.techsupportforum.com/foru...ta-452654.html

If you already have the DMP files please upload them in your next post.

Read other 2 answers
RELEVANCY SCORE 60.4

I started up my pc after installing windows 10 and now it won't get past the startup screen.

Read other answers
RELEVANCY SCORE 60.4

Hi My name is Ben

Anyways

I get the error code 0xc0000098 after trying to start windows setup from windows boot manager. Please help If you need more Information I would be happy to provide more just ask.

A:Help with getting past Blue Screen of Death

Somebody Please I realy Need the help I have fought this problem for four days strait trying to fix this.

Read other 4 answers
RELEVANCY SCORE 60.4

Hi,

First, I am not what you'd call technically literate....

I have an emachine m6809 laptop. Earlier today the machine seemed to freeze up and I ended up shutting it off by pressing the power button. I left it off for a number of hours. Now I can't get past the blue Windows XP screen that is divided in half where you click to enter and begin work. All the keys are frozen. The only way to turn the machine off is using the power button. I can't seem to get past that.

Any ideas?

A:Cannot get past blue Windows XP screen

uh, ctrl+alt+delete?

i used to have this problem when XP first came out, dont know what it was and thats the only thing that would do it for some odd reason... if you get in, i suggest you backup all your work then reinstall as this fixed my problem 2 years ago...

Read other 10 answers
RELEVANCY SCORE 60.4

I can't start up my system :( the information on the blue screen is unmountable_boot_volume and 0x000000ED

I've tried inserting the re-installation disc and nothing happens

I can't open in safe mode etc :(

any ideas what I can do?

Thanks

A:Can't get past blue screen of death :(

hi, x. Did you make a note of what came after the 0x000000ED error message (were there any groups of figures in brackets). If you have a look at the following, http://support.microsoft.com/kb/297185, you will see that what you do can depend on the second parameter. You will need the disk, are you able to get in to BIOS and check that the cd drive is first in the boot order.

edit: I just realise you call your disk the re-install disk. Is it a full copy of windows, or a recovery disk provided by the manufacturer?

Read other 3 answers
RELEVANCY SCORE 60.4

I can boot ok in safe mode and the odd time can boot normally but for the most part I can't get back in.

I was online last night and got some weird popups from my virus scanner that said scripts were blocked so I clicked ok and went to do an online virus scan. When I got to trend micro and clicked the link I got an error that said the exe file was not a compatible win32 file. I knew something must be up as I had used it several times before. I revolted and my computer kept looping. I got in through safe mode and did a sys restore and rebooted. Everything seemed ok so I did the virus scan and it found 5 threats so I fixed those and it required a reboot and since that I can't get back in unless I am in safe mode.

I also ran chkdsk and let it fixed an error there but I am again stuck at the blue welcome screen.

I am running win xp home edition
Computer is a toshiba satellite P20 laptop

Any idea how to fix this issue? Does it sound software or hardware related?

TIA

Eta: can I run hjt's and the others in safe mode? I tried another restore just to get in but it locks up. So I am backing up pics and stuff now to an external. I went to another laptop and downloaded all programs suggested and can transfer to my wonky one but is it ok to run in safe mode?
 

A:Can't get past windows blue welcome screen

Read other 16 answers