Over 1 million tech questions and answers.

BSOD Random and Random Restarts, Help plz! (STOP: 0x0000001E )

Q: BSOD Random and Random Restarts, Help plz! (STOP: 0x0000001E )

I am typing this original post from my cellphone because that is where I wrote the blue screen error finally once it started happening frequently, just today so please do forgive me if I am missing anything but I'll come back on my Desktop and try to finish anything needed in the post once I submit it from my phone.

Here is the error message:
STOP:
0x0000001E (0XFFFFFFFFC0000005, 0XFFFFF80003281DC2, 0X0000000000000000, 0X000000000000020)

I will let you know right off the bat that I am definitely not a techie so this is all very confusing to me. Please any help would be extremely appreciated!! Thanks again I'm advance!

Now before I came here to post, I did do a few hours of research and eventually took the following steps.

1. I have reinstalled my Nvidia Graphics Driver.
2. I have deleted, uninstalled, cleaned up a great deal of space on my desktop.
3. I have used Safe Mode to enter my Device Manager where I looked at my Network Adapters and made sure that all of them were up to date, this was easy because I only had 3 network adapters. The first two were both up to date. The third one is "Microsoft Virtual Wifi Miniport Adapter" which wouldn't allow me to update because it said it was not from a "trusted source" and windows didn't want to authorize. For this reason I just right-click and Disabled it.
4. I have run SFC /scannow from cmd as Administrator. The results:
"Windows Resource Protection did not find any integrity violations."

That is all I have done so far, steps 3 & 4 I just did now so I haven't had a chance to see if this fixed my problem yet or not..but I have a feeling that it wouldn't so that is why I am asking for help now in advance.

A little background about my desktop. I have had it for a few years now and I have been using it mostly for gaming. I have played tons and tons of games on it without having any issues before whatsoever it is an amazing desktop! It out-runs almost all of my friends' desktops that have higher specs.

The first random BSOD I have ever got on it was about 2-4 weeks ago while I was playing world of Warcraft. Because I have never had one before I did not think too much of it. But then about a 1-2 weeks ago it happened again and I began to get worried. The second time it happened I was not playing any games at all I was just browsing the Internet. Then this week it happened again, and as of yesterday my Desktop would sometimes not even blue screen, instead it would just turn off randomly by itself and then restart on its own.

Since yesterday this has occurred quite a few times, once every 5-6 hours or so. Two of the times it was while I was browsing the Internet or my email. The rest of the time it happened all while I was playing World of Warcraft.

What I don't understand is in between now and when I first started playing WoW (about 2 months ago) I have not changed anything on the computer and there were absolutely no problems running WoW whatsoever during the first month when I was actually playing it more.

There are only a very few couple of things that have changed. All of which were automatic updates basically.

1. My Windows did run a rather large automatic update right around the same time that I started having the first of these issues.
2. My Nvidia driver was also updated to a newer version (which I have reinstalled now)
3. World of Warcraft did have a recent patch.
4. I connected my Desktop to an external 2TB WD My Cloud.
5. If there was anything else I can't think of it. But the only change here I mentioned that actually happened around as far back as the first BSOD occurrence was the Windows Automatic Update!

Anyways, thanks for any help, it's gotten really really bad now. In Safe Mode I'm not having issues, but as of just tonight in the passed 1-2 hours if I log onto WoW my Desktop will either BSOD or automatically restart within only being online 5-10min..I can't play at all!

Will be checking for replies so I can give any further information that you may need in order to help me!

RELEVANCY SCORE 200
Preferred Solution: BSOD Random and Random Restarts, Help plz! (STOP: 0x0000001E )

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD Random and Random Restarts, Help plz! (STOP: 0x0000001E )

Hello oksm08, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

Read other 1 answers
RELEVANCY SCORE 106

I have been experiencing this BSOD on a regular basis since 7/25/2013. I tried an older restore point, I ran DriverHub and update all drivers and my Windows Update are all current. Can not solve. Under the BSOD Stop error technical information it references a qwdf64.sys address FFFFF88002D8A69A base at FFFFF88002D87000, FFDB21. I have attached my "grab all" files folder from my SF Diagnostic Tool. Any help to fix this is greatly appreciated.

A:BSOD Random 0x0000001E Stop

Hello tech514. What you have described is true ... the BSOD is caused by Qustodio PassThrough Filter Driver.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff88003d7269a, 0, 7abba90}

*** WARNING: Unable to verify timestamp for qwdf64.sys
*** ERROR: Module load completed but symbols could not be loaded for qwdf64.sys
Probably caused by : qwdf64.sys ( qwdf64+369a )

Followup: MachineOwner
---------
And the driver is somehow old.

Code:
fffff880`03d6f000 fffff880`03d7b000 qwdf64 T (no symbols)
Loaded symbol image file: qwdf64.sys
Image path: \??\C:\Windows\system32\Drivers\qwdf64.sys
Image name: qwdf64.sys
Timestamp: Fri Jul 13 13:54:01 2012 (4FFFDB21)
CheckSum: 00010A7C
ImageSize: 0000C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Qustodio Download

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Clic... Read more

Read other 1 answers
RELEVANCY SCORE 105.2

Hello Everyone,

As my first post, I am seeking help with my Windows 7 BSOD crash. I am usually online and Firefox freezes and gives me the light-grey out screen and says (not responding) usually followed by the BSOD with error codes

0x0000001a and or 0x0000001e

Don't know if it is a driver error or memory error. I have recently re-installed Windows 7 and still same problem, also have uninstalled Photoshop and Illustrator, for which I thought might be hogging my RAM.

If you have the time to look over my .dmp files and spot a problem or possible solution I would greatly appreciate it, Thank you in advance!!

A:BSOD Error 0x0000001a/0x0000001e (Not Responding) Random Restarts

Before proceeding:

1. Download and save this tool to your desktop:

http://go.microsoft.com/fwlink/?linkid=52012

2. Run the tool, and then click 'Copy' - ignore any errors if they appear
3. Use CTRL+V to paste the unedited results of the tool here in your next reply

Read other 2 answers
RELEVANCY SCORE 104.8

Hi, my pc recently started to freeze at random, doesn't matter what i'm doing, if playing or watching films or even nothing: the image on the monitor is blocked, mouse and keyboard loose alimentation while the rest of the pc (fans ad cd drives) keep working and the hdd led is off. (all tempereture are low i don't think it's overheating)
Occasionally it also crash with the BSOD error STOP: 0x0000001E (0xFFFFFFFFC0000005, 0xFFFFF80002A891CF, 0x0000000000000000, 0x0000000000000000)

I tried to change tha ram with 3 new corsair 2Gb 1600mhz but it froze anway.
Also i've formatted and reinstalled win 7 on main HD, updated the bios, downloaded all the drivers for the mainboard from the asus site, and the drivers for the video card, but didn't helped.

Another problem (but i don't know if it's related) is that the pc found a RAID controller and it asks the driver for it, but i don't have a RAID controller and i didn't set the hard disk in raid mode in bios, also when i download asus drivers for raid controllers i receive this message: system does not have requirement for the installation,
right at 100% of installation.

Hope i've been clear enough and thank for your help and tell me if i have to give you any other information.

A:random freezes and BSOD stop: 0x0000001E

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
The Sonix USB camera driver is very old.

Code:
fffff880`07483000 fffff880`07eec200 snpstd3 (deferred)
Image path: \SystemRoot\system32\DRIVERS\snpstd3.sys
Image name: snpstd3.sys
Timestamp: Fri Jul 03 07:10:16 2009 (4A4D6180)
CheckSum: 00A708DC
ImageSize: 00A69200
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Sonix Technology Co., Ltd.

And, Disable USB Selective Suspensd too.
USB Selective Suspend - Turn On or Off

For the USB devices, first, detach all the USB devices other than the keyboard and mouse.
Then, Update the drivers for them... Read more

Read other 9 answers
RELEVANCY SCORE 104.8

So I bought a new computer for my sister-in-law from newegg (and built it)

She has been getting a few random BSODs, I tried doing a fresh install of windows, her programs and drivers. She claims it only happens once a week, but is scared she will lose work as she uses this computer for her business.

System is running Windows 7 Pro x64 retail
everything is brand new

system specs:
Mobo - gigabyte 880GM-USB3
Proccesor - AMD Phenom II x6 1055T (2.8GHz)
Ram - Gskil DDR3-1333 8GB
Video - Saphire Radion HD5450

A:Random BSOD occasionally stop: 0x0000001E

  
Quote: Originally Posted by bitzdv


So I bought a new computer for my sister-in-law from newegg (and built it)

She has been getting a few random BSODs, I tried doing a fresh install of windows, her programs and drivers. She claims it only happens once a week, but is scared she will lose work as she uses this computer for her business.

System is running Windows 7 Pro x64 retail
everything is brand new

system specs:
Mobo - gigabyte 880GM-USB3
Proccesor - AMD Phenom II x6 1055T (2.8GHz)
Ram - Gskil DDR3-1333 8GB
Video - Saphire Radion HD5450



These crashes were caused by memory corruption. Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first ... Read more

Read other 1 answers
RELEVANCY SCORE 104.8

I have been getting different BSOD but this is the most recent one i occured,Please help because i don't really wanna spend money on fixing my computer..

Thanks in advance guys

A:Random BSOD,stop 0x0000001E (0xFFFFFFFFC000328)

Hello spadexhearts and welcome to Sevenforums.

BSOD Analyse

I've seen pointers towards your USB drivers.

Possible fix| Go to Device Manager > Expand the USB list > Right click the first one > Select Properties > Go to the Driver tab > Select Uninstall Driver and do it to all of them.

Let Windows detect them and reinstall them.What kind of USB Devices to you have attached to your hub?

SFC /scannow

We usually ask people to do this command to check if Windows is corrupted. It's the most common one used to check if the Windows files are corrupted. If it'll find errors, it'll restore them.



   Tip
If you're having a custom customization layer on your Aero, it's likely to get restored to default.
Press Start | search 'cmd' | Right-click it
| open as Admin | type SFC /SCANNOW

SFC /SCANNOW Command - System File Checker

Best Regards,
Frederik.

Read other 9 answers
RELEVANCY SCORE 104.8

Hello, I was working on a computer I am refurbishing and most of its problems were worked out (all software; reinstalling Windows and drivers), but when test-running it today, after running for a few hours, I went to check on it and (I think it woke from sleep) then it blue-screened. It had no label, just the stop code 0x0000001E (and then in parenthesis a few, I think 4, 0x00000000). I don't really know what it means, but I have not yet updated the BIOS (updates are avaliable) so I don't know if that would help. Thanks for any help. (Required ZIP attached).
EDIT: The BSOD doesn't list a specific reason. It displays: 0x0000001e (0x0000000, 0x0000000, 0x0000000, 0x0000000).

A:Random BSOD, stop code 0x0000001E

Monitor hardware temperature with system monitoring software like Speccy or HWMonitor:
Piriform - Speccy

CPUID - HWMonitor For how to upload a screenshot or file, read here

Test and Diagnose RAM Issues with Memtest86+:RAM - Test with Memtest86+ Pay close attention to part 3 of the tutorial "If you have errors"


   Tip
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

Read other 9 answers
RELEVANCY SCORE 103.6

Hello all,

A few days ago my computer began experiencing random BSOD. I wish I knew was precipitated it, but I cannot. It seems random. Sometimes it happens when opening a browser. Other times it crashes on bootup. It gives me the stop error of 0x0000001e and says IRQL_NOT_LESS_OR_EQUAL. It's crashes three times while trying to post this.

Here is the 'grab all' file. Oh please don't crash while attaching it. . .

Thank you in advance.

A:Random BSOD, IRQL_NOT_LESS_OR_EQUAL, stop error 0x0000001e

Welcome to SevenForums

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.


Code:
fffff880`033bd9c8 fffff880`02eba8d1Unable to load image \??\C:\windows\system32\Drivers\SYMEVENT64x86.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMEVENT64x86.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT64x86.SYS
SYMEVENT64x86+0xc8d1
Norton Internet Security / SYMEVENT64x86.SYS / Source: Carrona.org

The antivirus you are currently using is known and contributing to your BSOD crashes, consider uninstalling it with the Norton Removal Tool and replace with Microsoft Security Essentials at least to test.Norton Removal Tool
Recommended antivirus program for Windows 7 based on stability compared to others:- Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Get the latest version/drivers for the Intel Rapid Storage stuff ... Read more

Read other 8 answers
RELEVANCY SCORE 96

Stop: 0x0000007e (0xC0000005, 0xBFAAEE59, 0xB9F2CC46, 0B9F2C948)

nv4_disp.dll

__________________________________________________________________________

That's the error I got on the BSOD then later on while I was listening to iTunes 7.1.1.5 and doing some work online via Java, my computer stoped all function and looped a short bit of the song I was listening to (Maybe .1 or a second of the song) quickly and repeatidly, until it randomly restarted (This happened 2 times.) Please help!

Thanks

-Sieg
 

A:Stop Error BSOD - Followed by random restarts - HELP!

Read other 7 answers
RELEVANCY SCORE 96

Hello,
after searching through many forums and Windows help sites i still can't help myself to find, why i am getting these bluescreens. I even installed Windows completely new, but after installing the Realtek GBE network driver (manually, cause Windows didn't find it) the 'fun' began again. I removed all Realtek drivers again and installed the latest i could find on the Realtek site and it seemed to run smoothly. Then i downloaded all the other drivers like the AMD Graphics and Soundblaster Z driver and installed them. The BSOD's came/come completely random. Today i've been able to play three Dota 2 matches without any problems, then 15 minutes later again. I also have to say this system ran like this for half a year without almost any problems or BSOD's. It somehow became slow and i tried stuff, broke it and now it seems still broken, although i formatted the drive and reinstalled Windows.

I've tried to debug the minidumps myself but it says something different evertime (I'll add the dmp files at the end, although there has not always been one created after a BSOD). I've tried reinstalling all the drivers and no help. I've put all stuff from AMD/ATI into the exception of Avira Antivirus, because i've read there might be interferences.

I ran MEMTEST86+ for like 3 hours - no errors. I have ran disk scans - nothing.

The BSOD is different every time. The time i get it is completely random. The only common i could recognize is that STOP: 0x0000001E (0x0000000000000, 0x000000... Read more

A:Random BSOD's at random times often error 0x0000001E

Please follow Blue Screen of Death (BSOD) Posting Instructions and upload the results with your next post.


Code:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: avguard.exe
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
That is your Avira Anti virus


Code:
*** WARNING: Unable to verify timestamp for avnetflt.sys
*** ERROR: Module load completed but symbols could not be loaded for avnetflt.sys
avnetflt+0x7000
fffff880`069f29d8 fffff880`069f2c88
fffff880`069f29e0 fffff880`069f2c00
fffff880`069f29e8 fffffa80`120aa388
fffff880`069f29f0 fffffa80`1209ba10
fffff880`069f29f8 00000000`00000001
fffff880`069f2a00 fffffa80`120aa350
fffff880`069f2a08 fffff880`02636511 avnetflt+0x4511
Avira again. Uninstall Avira with the Avira Removal Tool Avira AntiVir Removal Tool - Download


Code:
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiKernelCalloutExceptionHandler+e
fffff800`02a7d5be 90 nop
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt!KiKernelCalloutExceptionHandler+e
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: hardware
DEBUG_FLR_IMAGE_TIMESTAMP: 0
IMAGE_VERSION: 6.1.7601.18409
MODULE_NAME: hardware
FAILURE_BUCKET_ID: X64_IP_MISALIGNED

Code:
lmvm atikmdag
start end module name
fffff880`11088000 fffff880`11f98000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmd... Read more

Read other 9 answers
RELEVANCY SCORE 92.8

Hello,

A few days ago I got a random BSOD with the 0x0..1E stop error. Now my computer will rarely boot and when it does it still randomly gets the same BSOD. I once got a 1D stop error but its mostly 1E that keeps happening. I run Windows 7 Professional 64-bit and this time I used a Windows DVD to start up my computer. One time and only one I got the error message (while booting the computer) "BOOTIMGR corrupt, system couldnt boot" or something like that. I restarted my computer after I saw that and it was gone. I've attached two ZIP files of two different .dmp files that were created today with about 15-20 minutes in between them. Is there something wrong with my bios? If not, what could it be?

Thank you for any support, greatly appreciated

A:Random BSOD stop error 0x0000001E, hardware error?

Also maybe worth noting that I had not updated drivers in a while, right after posting this I updated my monitor's drivers. The rest were up to date.

Read other 3 answers
RELEVANCY SCORE 92

Ok, Im running 32 bit Windows Vista Premium, I have a AMD 6400, asus mobo, 8600 gt or somthing g card, and 4 gigs of g skill ram.
Every time I do somthing remotley graphic intensive like play Company of Heroes there is a 90% chance it will blue screen. AT other times it may not blue screen but it will just restart itself automatically. Also at any restart or if i turn it off properly any time the computer is booting it will ask me to choose my Operating System, but I only have one so I dont know why it will ask?! Also I then have to also choose "start windows normally". One other thing that is funny is that the clock never states the right time if i fix it and then turn it off it like sets it self back 3 hours or so? and also when i go to type in my password if i just type the first letter if continues to type all by it sell its amazing! Some one help me! thanks.

If you can solve this problem I would send you this additional 450watt power supply think I won at a lan for free, seriously!

Thanks,
Devon

EDIT

The BSOD says somthing like somthing like "Secondary Processor Clock Interrupt"

A:BSOD wont stop, Random Restarts. please help. Free Power Supply thing if you fix it!

Do you have the latest drivers for your graphics card?

Read other 4 answers
RELEVANCY SCORE 90

Here is a screenshot of the BSOD itsself and also got a copy of the error report

Attachment 341393


Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000094
BCP2: FFFFF8800C670D60
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\112314-13993-01.dmp
C:\Users\The Riddy\AppData\Local\Temp\WER-14040-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Full specs are as follows can be provided if needed

A:Need help with Random Blue screen of death ***STOP: 0x0000001e***

Please follow Blue Screen of Death (BSOD) Posting Instructions

Read other 4 answers
RELEVANCY SCORE 90

Here is a screenshot of the BSOD itsself and also got a copy of the error report

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000094
BCP2: FFFFF8800C670D60
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\112314-13993-01.dmp
C:\Users\The Riddy\AppData\Local\Temp\WER-14040-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Full specs are as follows can be provided if needed
 

A:Random Blue screen of death ***STOP: 0x0000001e***

Go to C:\Windows\Minidump\ and select all the .dmp files. Right-click sending the files to a compressed(zipped)folder. Upload this folder as a file here, so we can read and decode them
 

Read other 5 answers
RELEVANCY SCORE 85.6

I get the below error in the event log way too often. Often times the computer crashes as is coming back from sleep mode, other times I just find out it crashes as I get back to the computer the "Your computer... and check online for solutions" message display.

Here is the error from the event log.

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc000001d, 0xfffff80002b0b2cf, 0x0000000000000002, 0x0000058000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 101512-22557-01.

Any help is greatly appreciated.

A:Random BSOD 0x0000001e

Welcome

Basic questions:Since when did these problems start?
Have you reinstalled the OS?
Did you make a full scan with your antivirus? (MSE, as I see)
What's the age of all the hardware?
Is it under its warranty?

Run this tool and delete anything it finds:Anti-rootkit utility TDSSKiller
Then make a full scan with MSEIf you're using any back up tool or 3rd party remote control programs, suggest you to uninstall them while troubleshooting.


Code:
STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
Usual causes: Kernel mode driver, System Service, BIOS, Windows,
Virus scanner, Backup tool, compatibility
BugCheck A, {0, 2, 0, fffff80002a89dec}
Probably caused by : ntkrnlmp.exe ( nt!KiCommitThreadWait+3ec )
------------------
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes: Defective hardware (particularly memory - but not just RAM),
Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
BugCheck 50, {fffff1200e01d500, 0, fffff80002d56456, 7}
Probably caused by : ntkrnlmp.exe ( nt!CmpAllocateKeyControlBlock+d6 )
------------------
STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
Usual causes: Device driver, hardware, System service, compatibility,
Remote control programs, memory, BIOS
BugCheck 1E, {ffffffffc000001d, fffff80002b0b2cf, 2, 58000000000}
Probably caused by : memory_corruption ( nt!MiRemoveLockedPageCharge+2b )
------------------
STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION
Usual causes: System service, Device driver... Read more

Read other 5 answers
RELEVANCY SCORE 85.6

Hi,

Attached is dump file, I am geting BSOD randomly sometimes browsing sometimes playing for no obviouse reason.

My pc is

965 Phenom II
4gb
6950 modded 6970
crucial ssd c300 64gb
Creative x-fi platinum
500gb seagate
Giagabyte ud4

Thanks

A:Random BSOD 0x0000001e

Hi.

Update the software\driver for Realtek Wireless USB 2.0 Adapter

Realtek
Finish and post back.

Read other 5 answers
RELEVANCY SCORE 85.6

Hi, I have a laptop (Dell E6530, Win7 Prox64) that has been getting a BSOD every few days, sometimes twice a day.

Usually it is this:

The bugcheck was: 0x0000001e (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 022013-9516-01.


Most recently it was:

The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff80002a74b45, 0xfffff880077becd0, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 022713-8767-01.


I have already done SFC, and several MemTest86 passes. All come back clean.

I looked at a dmp file in WinDbg, but can't make much sense of it. After telling me a number of symbols couldn't be loaded I get: Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 )

I have attached a BMarrow.zip as described in the posting instructions.



any ideas?

A:BSOD, seems random, usually 0x0000001e

Hi BMarrow,

The crash dump that you shared points at the USB 3.0 Host controller driver (Intel(R) USB 3.0 eXtensible Host Controller Driver) in the system.

Code:
Unable to load image \SystemRoot\system32\DRIVERS\iusb3xhc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iusb3xhc.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3xhc.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 )

Followup: Pool_corruption
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: 0000000000000000, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception
Follow the steps listed below:
- Unplug the external drive/... Read more

Read other 3 answers
RELEVANCY SCORE 85.6

Hello,

i recieved today a BSOD with the bugcheck 0x0000001e,
i will send de SF diagnostic tool map aswell.
i hope you can help me with this.

Thanks in advance,
Tim Smits

A:Random 0x0000001e BSOD

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {1ae8, 2, 1, fffff80002ee25c7}

Probably caused by : memory_corruption

Followup: memory_corruption
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000001ae8, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute op... Read more

Read other 1 answers
RELEVANCY SCORE 85.6

Hi!

i have got these random bsods latley the code is 0x0000001E.
and heres the crash dump file

Attachment 160086

A:Random BSOD's 0x0000001e

  
Quote: Originally Posted by dave1337


Hi!

i have got these random bsods latley the code is 0x0000001E.
and heres the crash dump file

Attachment 160086


2 Problems

1-video driver. replace with newest using these instructions

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper
Phyxion.net - Driver Sweeper

When it is removed then download and install the fresh copy.
2-Symantec. Remove and replace with Microsoft Security Essentials

| Norton Support

Virus, Spyware & Malware Protection | Microsoft Security Essentials

Read other 1 answers
RELEVANCY SCORE 85.6

I keep getting BSOD's with three of them being 0x0000001e and one being 0x0000000A. I'm not sure whats wrong, as the system was running fine before. I have included the four dumps

Thanks for your help

Windows 7 Ultimate x64
Custom Built System
Store bought OEM OS

System Built January 2012
OS age June 2012

Attachment 222638

A:Random BSOD 0X0000001E

All of the dmp files are reporting a Memory Corruption. So first off please run a RAM - Test with Memtest86+

And to verify that your windows is genuine please do Windows Genuine and Activation Issue Posting Instructions








  
Quote: Originally Posted by writhziden


Your crash reports indicate a possible problem with your Windows installation. Please follow the Windows Genuine and Activation Issue Posting Instructions. Post the results in your next post; do not start a new thread.







  
Quote: Originally Posted by Brink


NOTE: The MGADIAG report does not contain any sensitive or personal information, and is best posted un-edited for us to be able to help.

7. Select (highlight) all of the MGADiag report that you just pasted, and click on the code box # toolbar icon to wrap the report in a code box when posted. (see screenshot below)

Attachment 222629


Coutesy of: writhziden


Just a quick FYI - We cannot assist you in your problems unless your windows in genuine. According to forum rules.

Read other 1 answers
RELEVANCY SCORE 85.6

hello, the past few days i get random BSOD with the bugcheck 0x0000001e (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000).
i have the rar file added.

i hope you can help me with this problem
thanks in advance,
Tim Smits

A:BSOD 0x0000001e, random

Hi xiamaiani.

The display driver is failing here. It is seen for the latest version of the AMD display driver for a few other cases too.

Uninstall the display driver in full. Then clean up any possible leftover. Then install the earlier version. Hopefully it will solve the display issue.

Some other issues are there too, but not very prominent in the dumps. So we will have to have another look; but after fixing the prima facie issue.

So let us know how it is running after altering the display driver.

Read other 9 answers
RELEVANCY SCORE 85.6

Hello everyone, I need a little help with my new computer that I recently built. I've been getting a random 0x0000001E BSOD and haven't a clue how to fix it. The computer is overclocked but I have run multiple stress tests to ensure it is stable. I ran Prime95 for over 24 hours with no errors, IntelBurnTest @ Maximum Level for 15 runs, Furmark and 3DMark11 to test the VGA (no O/C) and I have run Memtest on the ram which showed no errors. I have attached the zip file with all the system info so hopefully someone can help me out with this. Thanks in advance.

A:0x0000001E Random BSOD

Welcome
Looks like a driver, but which one? A driver verifier may help.
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for ... Read more

Read other 8 answers
RELEVANCY SCORE 84.4

I have a machine that blue screens. No pattern has been identified except that it only does it when plugged into the port replicator. When the user has it at home, there is never a problem.

You'll notice by the minidumps this problem was happening a couple months ago then started again today. The user has been out of the office that whole time. We did not get a chance to fix it back then.

I spent the day upgrading drivers. There is a video card driver update left to do and it's highly possible that is the one. However, out internet comes to a screeching slow in the afternoon.

I've tried using Microsoft's debugging tools but was not getting very far when I ran across your site.

I've attached the zip as indicated in your instruction set for submitting to the BSOD board. The affected machine is a Windows 7 Professional x64 Sony Viao model number VPCZ212GX.

Thanks for all you guys do! Any help is greatly appreciated.
--
Quintin

A:Random BSOD, error 0x0000001e

Code:
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000003, the pool freelist is corrupt.
Arg2: fffff800034621f0, the pool entry being checked.
Arg3: 0000000000000000, the read back flink freelist value (should be the same as 2).
Arg4: fffff800034621f0, the read back blink freelist value (should be the same as 2).

Debugging Details:
------------------
BUGCHECK_STR: 0x19_3

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: System
Having a check for any solutions now, bear in mind, I am new to BSOD analysis.

Read other 4 answers
RELEVANCY SCORE 84.4

I recently purchased a Toshiba Satellite u205-S5057 from Ebay. When I received it in the mail, it didn't get the BSOD but I have an idea how I started getting it, but I'm not 100% sure. I was doing some system updates when something on my screen said, let this program allow system changes, or something like that, but I clicked yes, thinking it was for the updates. Then my laptop shut off, I don't know If it was because of me or the battery, I was warned about the battery. So after that I started getting BSOD errors and sometimes the same one shows up, sometimes I see some that I've never saw before, for example, I get "Bad_Pool_Caller" BSOD errors often and sometimes I see "Bad_Pool_Header" BSOD errors. I'm able to run the laptop in safe mode, I rarely get BSOD errors when I do. In safe mode I get details about the BSOD. I copied what the info said.

A:BSOD, 0x0000001E, Bad_Pool_Caller, and other random ones

Blue Screen of Death (BSOD) Posting Instructions

Read other 8 answers
RELEVANCY SCORE 84.4

I was on my comp for about... an hour or 2 and it BSOD'd it happened before but hasn't happened in a while til now i restarted it and its running good but i would like to know why its happening the error code is 0x0000001e i realize this won't fully help you guys so i included a system health report and the DMP report
OS= Windows 7 64 Bit
Installed less than a year ago
Full Retail

A:Random BSOD error 0x0000001e

Lets see where to start.

1-A three year old Lycosa.sys mouse driver. Update to latest.

2-Avast. remove and replace

Avast can be a contributing cause of BSOD'S . Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

If after that you are still having them upload the DMP's

Read other 2 answers
RELEVANCY SCORE 84.4

Occasionally getting BSOD while gaming. At first I thought it was driver related but I've gone through and updated everything that I could find and still stumped. Any help finding the cause would be appreciated.

A:BSOD 0x0000001e Random while gaming

Hello Auryon.

The BSOD is caused by the ATI display driver.

Code:
fffff880`0c69c4d8 fffff880`07193c77Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
atikmpag+0x43c77
And you have a BETA display driver installed.

Code:
fffff880`07150000 fffff880`071ee000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Wed Jul 24 04:40:26 2013 (51EF0D62)
CheckSum: 00098BBD
ImageSize: 0009E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Uninstall all components of the display driver using AMD Catalyst Un-install Utility. Then download and install the latest WHQL display driver only.
Latest AMD Catalyst Video Driver for Windows 7



   Information
WHQL
Release Date: April 24th 2013
Version: 13.4
In Device Manager: 12.104

Also, Intel RSD drivers are causing problems there, too.

Code:
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
*******************************************************************************
* *
* ... Read more

Read other 2 answers
RELEVANCY SCORE 84.4

Hello

Every now and then I'm getting BSOD's with error code 0x0000001e. It will happen about once a day and at any given time. This last time I was just web surfing and had windows explorer opened and paying music with iTunes. I received a windows crash report after reboot with this information on it:

BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6.1.7601
Service Pack: 1.0
Product: 256.1

I'm including my memory dmp. files
Please help

A:It Seems I'm getting a Random BSOD error 0x0000001e

IT looks like your BSOD is being caused by your Intel rapid storage driver:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys

Probably caused by : iaStorA.sys ( iaStorA+63aa8 )

Followup: MachineOwner
---------
Driver Reference Table - iaStorA.sys

As you can see the driver is likely out of date:


Code:
kd> lmvm iaStorA
start end module name
fffff880`012b0000 fffff880`01936000 iaStorA T (no symbols)
Loaded symbol image file: iaStorA.sys
Image path: iaStorA.sys
Image name: iaStorA.sys
Timestamp: Tue Aug 07 11:43:10 2012 (5021378E)
CheckSum: 00090889
ImageSize: 00686000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update the driver from here: https://downloadcenter.intel.com/Default.aspx

Read other 4 answers
RELEVANCY SCORE 84.4

I have been having random blue screens which can happen in a game or on the desktop.

Have run memtest86+ found no errors and used command sfc now and chkdisk, also no errors.

All my drivers are up to date and I do not overclock.

The only thing that comes up in my minidump is a driver called ntoskrnl.exe+b1a17

I have reinstalled windows multiple times but this has not fixed the problem.

Here are my minidumps:

==================================================
Dump File : 120611-17175-01.dmp
Crash Time : 06/12/2011 21:55:49
Bug Check String : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x0000001e
Parameter 1 : ffffffff`c0000005
Parameter 2 : fffff800`02ef435f
Parameter 3 : 00000000`00000000
Parameter 4 : ffffffff`ffffffff
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+71f00
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : x64
Crash Address : ntoskrnl.exe+71f00
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\120611-17175-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7600
Dump File Size : 292,232
==================================================

================================================== ... Read more

A:K_MODE_NOT_HANDLED 0x0000001e random bsod.

Error message on a blue screen on a computer that is running Windows 7 or Windows Server 2008 R2: "STOP: 0x0000000A"

try downloading this hotfix

Read other 7 answers
RELEVANCY SCORE 84.4

Hello,

I had just finished playing some Civ5 and a few minutes after, a random BSOD happened.

Just trying to get to the root of the issue, if there is one.

Thanks for any help.

(Used the DM Log Collector. File is attached with this post)

A:Random BSOD, error 0x0000001e

Your nVidia driver has been flagged.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa80069674e0, fffff880100060dc, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+9a30dc )
Download the latest version (337.88) and follow NVIDIA Drivers - Avoid Problems for the cleanest possible install.

Test and report back.


Code:
3: kd> lmvm nvlddmkm
start end module name
fffff880`0f663000 fffff880`102ac000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Thu Dec 19 17:02:52 2013 (52B326BC)
CheckSum: 00C19112
ImageSize: 00C49000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Read other 1 answers
RELEVANCY SCORE 84.4

Hello all, I recently tried fixing a family friends computer, I reformatted and everything went fine for about 3 hour and then I started getting the 0x0000001e error at random intervals, I'd have it running on minecraft and nothing then I'd open spotify and it died, I then reset the computer and it did it near immediately and now it's running just fine. ( for about 10 min )
Any solutions?

A:Random BSOD, error 0x0000001e

My Current solution is to follow the instructions: Blue Screen of Death (BSOD) Posting Instructions

Read other 1 answers
RELEVANCY SCORE 84.4

Hey guys i need help, im having random BSOD mozzilla crash also after the BSOD computer reboot my MSE becomes out of date......

using MSE and MBAM

heres my log file from sfc /scannow

A:Random BSOD error 0x0000001e

somehow i cant attach the file wait

Read other 7 answers
RELEVANCY SCORE 84.4

Hi guys since I desperate I need the expert's advice if possible...it's been a couple of months that i get BSOD with these reports but i can;t find out the cause. I followed all instructions to get a minidump file even without restarting on error , with no luck, meaning \i get no minidump file.I get the feeling that something is going on with the Volume shadow copy but I 'm not really that advanced to understand.
I attach two of the last reports generated hoping that some of you big guys might find something out, i'd appreciate every effort.
Thank you in advance.

Read other answers
RELEVANCY SCORE 84.4

For the past few months, my computer has been randomly deciding it doesn't like whatever i'm doing, and having a good ol' fashioned BSOD. It very rarely lets me know what the error is before restarting, so if it's due to any other errors, i don't know what they are - i only got this code from it recrashing while dumping the memory to disk.
I've tried a few basic things to try and sort it out (cleaned the registry, run various mal/spy/whateverware programs, etc), but i'm not that experienced with fixing computers - generally it comes down to a quick google search for the offending error.
The first BSOD's came immediately after my computer spent a month disconnected from the internet, and initially seemed down to Norton Antivirus (it came free, i thought the worst that could happen was that it wouldn't be very effective), due to various errors stopping once it was removed, but it's continued, and i can't work out any connection between the crashes and the programs i'm running at the time - it can crash 5 times in a day, or not have any problems for 2 weeks.
As far as i know, all the drivers are up to date, but again, i'm not that experienced - there may be ones i had no idea even existed.

Also, please, in your answers, treat me like i'm good at following instructions but a little thick. I'll be happy to give you any additional information you need, but don't assume i'll automatically know exactly what you mean, and if possible, link to any programs i might need.

Thanks.

A:Random BSOD's, error 0x0000001e

  
Quote: Originally Posted by NuklearAngel


For the past few months, my computer has been randomly deciding it doesn't like whatever i'm doing, and having a good ol' fashioned BSOD. It very rarely lets me know what the error is before restarting, so if it's due to any other errors, i don't know what they are - i only got this code from it recrashing while dumping the memory to disk.
I've tried a few basic things to try and sort it out (cleaned the registry, run various mal/spy/whateverware programs, etc), but i'm not that experienced with fixing computers - generally it comes down to a quick google search for the offending error.
The first BSOD's came immediately after my computer spent a month disconnected from the internet, and initially seemed down to Norton Antivirus (it came free, i thought the worst that could happen was that it wouldn't be very effective), due to various errors stopping once it was removed, but it's continued, and i can't work out any connection between the crashes and the programs i'm running at the time - it can crash 5 times in a day, or not have any problems for 2 weeks.
As far as i know, all the drivers are up to date, but again, i'm not that experienced - there may be ones i had no idea even existed.

Also, please, in your answers, treat me like i'm good at following instructions but a little thick. I'll be happy to give you any additional information you need, but don't assume i'll automatically know exactly wha... Read more

Read other 3 answers
RELEVANCY SCORE 84.4

Hello all,

Recently on my gaming PC is have been having a completely random 0x0000001e, I really can't understand where it has came from, or what the root cause could be. It is a fairly new install at no more than a month old. I have not added any new internal hardware or anything like that, so what could be the cause for this random error?

Thanks for anyone who helps, I have attached my logs to the main thread, if any more information is required i'll happily provide it.

Regards,

A:Windows 8.1 Random BSOD 0x0000001e

Your both dumpfiles are probably caused by Snakeyes.sys.
You driver is dated SnakeEyes fffff800`15ed0000 fffff800`15ede000 Wed Sep 05 07:31:26 2012. (5046e3ae) 00008629 None SnakeEyes.sys. And probably not compatible with windows 8/8.1.

This driver belongs probably to your gaming mouse.
Update the driver from the manufacturer's website.Vengeance? M65 FPS Laser Gaming Mouse

If this not solves your BSOD's.

If using the Corsair Link2 software, please update this driver(from 2008) also to windows 8/8.1 compatible version.
If it cannot be updated please uninstall it - as it's known to cause BSOD's in some Windows systems.
Advice: update to all these windows 8.1 drivers from your mainboard Z87 Extreme6
ASRock > Z87 Extreme6

Read other 1 answers
RELEVANCY SCORE 84.4

So, for a little over a year now my computer has been giving me issues for no reason (I believe) and I've had enough. On some days, my computer will be fine and not crash for a couple more... some days, ehh.. It decides to not cooperate at all and just crashes every time it attempts to boot up. When my computer crashes it reboots and goes to Windows something and gives me a set of options so that I may fix my computer - I have literally tried all of them and none of them work except for System Restore which is only a temporary fix for my computer. I don't know what the issue is, I think it's an update of some sort? It always happens (the crash/BSOD) when my computer automatically updates or when too many things try to load at once. I don't know what is going on with it...

The Stop error it gives me is: "STOP:0X0000001E (0XFFFFFFFFC0000005, 0XFFFFF800033CB72A, 0X00000000___, 0X0000000000000018)

This may help: During last year summer(before the problems started) I went a period of 3 months with no internet and those updates might be missing.

A:Random, reoccurring BSOD. 0x0000001E

http://www.sevenforums.com/crashes-d...tructions.html

Read other 1 answers
RELEVANCY SCORE 84.4

I've been getting random BSOD's recently and my PC was set to automatically reboot so I never made note of the error codes! I have sice turned off the auto-restart and noted the error codes. Below are the most recent from the past couple of days.....

IRQL_NOT_LESS_OR _EQUAL.
STOP: 0X0000000A (0X0000000,0X0000001C, 0X00000001, 0X804E1BF8)

BAD_POOL_ERROR
STOP: 0X00000019 (0X00000020, 0XE35261A0, 0XE35261A0, 0X0C00002)
STOP: 0X0000008E (0XC0000005,0X805515A1, 0XA7A51AF8, 0X0000000)
STOP: 0X0000008E (0XC0000005, 0X805519E9, 0XBA49AA98, 0X0000000)

BAD_POOL_CALLER
STOP: 0X000000C2 (0X0000007, 0X000000CD4, 0X0000000, 0XE1949B48)

SYSTEM DETAILS...
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name OWNER-*****************
System Manufacturer TriGem Computer NETHERLANDS
System Model Advent Series
System Type X86-based PC
Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel ~3401 Mhz
BIOS Version/Date American Megatrends Inc. 1002.004, 16/08/2004
SMBIOS Version 2.3
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United Kingdom
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name OWNER-**********************
Time Zone GMT Standard Time
Total Physical Memory 2,560.00 MB
Available Physical Memory 1.48 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1... Read more

A:Random BSOD's and even more random stop errors

When did you buy this TriGem computer, and have you contacted them.
I worry about any computer built by TriGem as they are closely affiliated with the often failing eMachines models... and often failing hard drive failures.
Their motherboards go bad as they age and curl...
What you describe is typical of the motherboard problems.
In many cases, Tri-Gem makes the motherboards designed by Intel and others, in their own factory under license to the original manufacturer.
Of these "licensed" boards, we have found failure rates as high as 65%.
Document all contact efforts.
I would immediately keep documentation on all contacts, and with the seller.
 

Read other 2 answers
RELEVANCY SCORE 84.4

So I've been having this problem where windows 7 will just randomly restart. It's been doing this every three months or so. I'll be in the middle of doing something and then my computer will just black out and restart. I've tried fixing it using various methods: New heat sink, new hard drive, Re-installing Win 7 and so on. While these methods worked for a little while, every three months my computer would just randomly reset again. I'm at my wit's end here. Is there anyway that I could do to try and permanently fix the problem?

Read other answers
RELEVANCY SCORE 83.6

Hello, first off i want to say thank you for viewing this thread, secondly i believe the error code was 0x0000001e (if not im sorry i uploaded as instructions of everything) I ran Memtest for atleast 10 hours and no errors what so ever. I have had problems with my Desktop ever since i did a driver scanner and then messed up my whole system i believe, i switched my computer cases from the default to a HAF922 coolmaster, upgraded my gtx260 to a gtx 580 with a 1000watt psu, and have had a BSOD randomly since I have done all this and I'm not sure what it is, I've tried everything to figure it out so now im going to ask the experts to please help!!! thank you!!
Windows 7 . - x86 (32-bit) or x64 ? Home premium x64 - the original installed OS on the system? Vista - an OEM or full retail version? OEM - What is the age of system (hardware)? no older then 2-3 years? its an Asus essentio cg5290-bp007 (upgtaded psu(1000watt MUSHKIN) and graphics card(gtx 580)) - What is the age of OS installation (have you re-installed the OS?) No, Just upgraded it when windows 7 came out (was a free upgrade to Win7 from asus for purchasing their Essentio desktop

I just want to thank everyone who will be able to help me because it will mean alot to me!! thank you so much

A:BSOD at random times error 0x0000001e

Arctosa.sys, a driver used by your Razer Arctosa device is the cause, please update this driver
Razer Support

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Unable to load image \SystemRoot\system32\drivers\Arctosa.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Arctosa.sys
*** ERROR: Module load completed but symbols could not be loaded for Arctosa.sys
Probably caused by : Arctosa.sys ( Arctosa+11db )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this ad... Read more

Read other 2 answers
RELEVANCY SCORE 83.6

I've been constantly getting BSOD at random times ever since I updated to Windows 10. It usually happens when I am playing a game, but can also randomly happen when I'm just browsing on the internet.

BRIAN-PC-Tue_11_01_2016_144757_85.zip

Read other answers
RELEVANCY SCORE 83.6

Hi guys,

I am having some problems with my notebook, I hope someone could try to understand what is wrong with it!

I've had my Asus Zenbook for almost 4 years and couldn't be happier, but over the last couple of months I've been experiencing unusual slow downs, random freeze of the computer (especially when browsing Chrome for a couple of hours) that I can only solve by turning the notebook off via power button, and, more recently, BSOD.

Sometimes I get an error message "Windows has encountered a critical problem and will restart automatically in one minute. Please save your work now." BSOD are not always the same, but most of the time they refer to 0x000001E o 0x000001A, with messages like "0x000000BE an attempt was made to write to read-only memory" or relative to "Memory dump" problems.

These problems disapper in Safe Mode.

I am really not good with computers but I have tried to research as much as possible. Tell me if some more info is needed. I've asked around and they suggested to check the integrity of RAM, SSD, CPU, Motherboard (see below), nw I am thinking there might be some faulty driver, but I cannot figure out what to try at this point.

I am attaching a MiniDump file of the latest BSOD.

Thank you very much for your help.

____
Troubleshooting attempts so far:

- Antivirus scan with different softwares (Windows Defender, Avast, Malwarebytes): nothing found;
- System recovery with new install of OS: nothing... Read more

A:BSOD and random freeze, error 0x0000001e

Hi Dario,
from the event log
La struttura del file system nel disco ? danneggiata e inutilizzabile. Eseguire l'utilit? chkdsk nel volume OS.

please run
Chkdsk /r
then sfc /scannow.

Are you using Virtualbox, this was reported as having insufficient memory resources

you also had this
Popup dell'applicazione: Windows - File danneggiato : Exception Processing Message 0xc0000102 Parameters 0x000007FEFCBF819C 0x000007FEFCBF819C 0x000007FEFCBF819C 0x000007FEFCBF819C
Roy

Read other 1 answers
RELEVANCY SCORE 83.6

Hey I recently got an ASUS X54H laptop and it has windows 7 ultimate x64. I randomly get the BSOD error 0x0000001a and 0x0000001e and I've tried updating the drivers and still no luck it could be running great for a week or so and then give me the BSOD. I've attached the .zip made from the performance monitor. Any help would be great.

Thanks,
Adrian

A:Random BSOD, error 0x0000001a and 0x0000001e

Security Software:
Code:
avastsvc.exe c:\program files\avast software\avast\avastsvc.exe 1456 8 200 1380 3/28/2012 9:13 AM 6.0.1367.0 43.72 KB (44,768 bytes) 2/15/2012 5:51 PM
avastui.exe c:\program files\avast software\avast\avastui.exe 2536 8 200 1380 3/28/2012 9:14 AM 6.0.1367.0 3.57 MB (3,744,552 bytes) 2/15/2012 5:51 PM


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Kingston\BSODDmpFiles\aandrade158\Windows_NT6_BSOD_jcgriff2\032812-17534-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16917.amd64fre.win7_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`02c16000 PsLoadedModuleList = 0xfffff800`02e52e70
Debug session time: Tue Mar 27 22:57:31.892 2012 (UTC - 6:00)
System Uptime: 0 days 0:15:50.218
Loading Kernel Symbols
...............................................................
................................................................
...................................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* ... Read more

Read other 9 answers
RELEVANCY SCORE 83.6

Hi guys,

I am having some problems with my notebook, I hope someone could try to understand what is wrong with it!

I've had my Asus Zenbook for almost 4 years and couldn't be happier, but over the last couple of months I've been experiencing unusual slow downs, random freeze of the computer (especially when browsing Chrome for a couple of hours) that I can only solve by turning the notebook off via power button, and, more recently, BSOD.

Sometimes I get an error message "Windows has encountered a critical problem and will restart automatically in one minute. Please save your work now." BSOD are not always the same, but most of the time they refer to 0x000001E o 0x000001A, with messages like "0x000000BE an attempt was made to write to read-only memory" or relative to "Memory dump" problems.

These problems disapper in Safe Mode.

I am really not good with computers but I have tried to research as much as possible. Tell me if some more info is needed. I've asked around and they suggested to check the integrity of RAM, SSD, CPU, Motherboard (see below), nw I am thinking there might be some faulty driver, but I cannot figure out what to try at this point.

I am attaching a MiniDump file of the latest BSOD.

Thank you very much for your help.

____
Troubleshooting attempts so far:

- Antivirus scan with different softwares (Windows Defender, Avast, Malwarebytes): nothing found;
- System recovery with new install of OS: nothing... Read more

Read other answers
RELEVANCY SCORE 83.6

Hello there, good evening! I've had quite recently this BSOD related apparently to one of my drivers... Yet I don't know which nor how to find the problem in the minidump, therefore I recur to you guys

Hoping for a solution or aid in finding it! Thanks in advance

P.D. I've attached all the necessary files as requested

A:random BSOD, usually while playing, error 0x0000001e

The cause seems to be from your Intel Rapid Storage Technology.
Please create a restore point before changing drivers as I don't want the risk of making your problems worse.
Please update it from the following website.

https://downloadcenter.intel.com/Det...adType=Drivers


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
Probably caused by : storport.sys ( storport!StorPortNotification+22 )

Followup: MachineOwner

Code:
storport!StorPortNotification+0x22:
fffff880`0176e0d2 488b18 mov rbx,qword ptr [rax] ds:38a0:0073da65`0073da65=????????????????
Resetting default scope

Code:
STACK_TEXT:
fffff880`038b08e8 fffff800`0327e5be : 00000000`00000001 fffffa80`1a034000 fffff880`038b1060 fffff800`032b1a90 : nt!KeBugCheck
fffff880`038b08f0 fffff800`032b175d : fffff800`03495380 fffff800`033d2260 fffff800`03211000 fffff880`038b1808 : nt!KiKernelCalloutExceptionHandler+0xe
fffff880`038b0920 ... Read more

Read other 4 answers
RELEVANCY SCORE 83.6

I started off getting the 0x0000007f BSOD and I think it was relating to my graphics card drivers so I reinstalled the drivers, now I've been getting 0x0000001e BSOD and I haven't a clue what the problem is. These seem to happen only once each day and I can't seem to find any relation to what I was doing at the time.

Any help is greatly Appreciated

A:0x0000001e and 0x0000007f BSOD, Random Occurances

Hello and Welcome!

Yes the dump files are pointing to display drivers. Reinstall your display drivers including Intel integrated graphics driver Igdkmd64.sys and Direct X as well.

Download Speedfan or HWMonitor and check the Temps and see if there is some kind of overheat issues. If your Overclocking please revert it back to default settings.

Run Hardware Diagnostic Hardware Diagnostic | Captain Debugger

Bugcheck:


Code:
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: 0000000080050033
Arg3: 00000000000406f8
Arg4: fffff88006fb0033

Debugging Details:
------------------
BUGCHECK_STR: 0x7f_8

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: b

LAST_CONTROL_TR... Read more

Read other 1 answers
RELEVANCY SCORE 83.6

Random BSODs and power cycles. Sometimes the system will crash while sitting idle. Sometimes it'll freeze when opening an application. Currently unable to pin-point the cause.

A few things I've already done:
* All drivers updated that I'm aware of.
* Power supply replaced with Corsair 650w from my other computer but .
* I've replaced the motherboard (same brand & model) with a new one from Newegg but still no go.
* Memory wise, I've had 6 successful MemTest86+ passes without any errors.
* Used both the integrated INTEL HD graphics and the Radeon but same result.
* Fresh hard drive installed of Windows7-64 (Home Premium OEM).

Only thing I haven't done is replace the CPU. I'm suspecting it's a OS/software issue but I'm not sure. Any help will greatly be appreciated.

Computer build with all new parts:

i5-2500K (stock speed)
Asrock Z68 Pro3-M (default settings with the exception of XMP profile)
G.Skill 8GB PC3-12800 9-9-9-24 @ 1.5v
Radeon 4850 (latest drivers)
WD Black 640GB
Windows 7 - 64bit (latest patches)
OCZ 550w Fatality PS

A:BSOD 0x0000001e + random power cycles

  
Quote: Originally Posted by Summer


Random BSODs and power cycles. Sometimes the system will crash while sitting idle. Sometimes it'll freeze when opening an application. Currently unable to pin-point the cause.

A few things I've already done:
* All drivers updated that I'm aware of.
* Power supply replaced with Corsair 650w from my other computer but .
* I've replaced the motherboard (same brand & model) with a new one from Newegg but still no go.
* Memory wise, I've had 6 successful MemTest86+ passes without any errors.
* Used both the integrated INTEL HD graphics and the Radeon but same result.
* Fresh hard drive installed of Windows7-64 (Home Premium OEM).

Only thing I haven't done is replace the CPU. I'm suspecting it's a OS/software issue but I'm not sure. Any help will greatly be appreciated.

Computer build with all new parts:

i5-2500K (stock speed)
Asrock Z68 Pro3-M (default settings with the exception of XMP profile)
G.Skill 8GB PC3-12800 9-9-9-24 @ 1.5v
Radeon 4850 (latest drivers)
WD Black 640GB
Windows 7 - 64bit (latest patches)
OCZ 550w Fatality PS


Since your memory has passed 6+ passes with memtest it is probably a driver.






Quote:
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair f... Read more

Read other 4 answers
RELEVANCY SCORE 83.6

I have been plagued with this BSOD for a while now. I have ran my driver utility and as far as I can find I have the most current version of the BIOS. I ran a system scan that said it found no integrity problems. I will attach the minidump file and pray that the issue is simple and just evades me. This computer is very imprtant to my wife due to the fact that she uses it for school.

Thank You,
Michael
OS: Windows 7 Home
Prossessor: AMD Athlon II

A:Random BSOD with error code 0x0000001E

crud: just had another BSOD. This is getting old. I used to get one for BUGCODE_USB_DRIVER but I think I finally got that one done. This one seems more generic and I am gettingmore frustrated by the day. Please help if at all possible....Thanks again

Read other 3 answers