Over 1 million tech questions and answers.

Can't find windows server 2008 64 bit compatible drivers f...

Q: Can't find windows server 2008 64 bit compatible drivers f...

Hi, I have just purchased a HP Pro desk 400 g3 computer that i need for windows server 2008 to be running on. However after install i culdnt find drivers for windows server 2008. So far i managed to just the lan drivers which i downloaded form realtek. can anyone tell me were can i get compatible drivers for windows server 2008 64 bit for this computer. thanks

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Can't find windows server 2008 64 bit compatible drivers f...

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 75.2

Dear All,

Can you help me, I have a problems about my application. It can only running well on IE 6 windows server 2005 but my client want to install it on windows server 2008 (Default IE 7).
I had tried but error. One of problems is can not load ieframe.dll

Do you have solve about this problems?
Can IE 6 Running on windows 2008?

Thanks
[email protected]

Read other answers
RELEVANCY SCORE 74.8

how can i load drivers for hp 280g2 for windows server 2008 R2 64 bit, we have loaded the server software, even the usb is not getting detecting on the system, please give me a solution, Thankyou

Read other answers
RELEVANCY SCORE 74

I need to connect workstations running XP to a network, heard (overheard?) XP and server 2008 are not compatible. Is this true? Do I need to stick w/ server 2003? Are there programs to overcome this alleged obstacle? Thanks to anyone with knowledgeable input.

A:XP and Server 2008 compatible?

I am studying Win2003 Server and much of what I've learned will apply.

If you set your Win2008 Server as a Domain Server, using the default Forest Level, it will support NT thru XP.

Now if your talking about Managed Desktops (managed from the Domain Server; updates, configuration, etc.), that is another can-of-worms.

For small organizations, Managed Desktops is not a good idea. Let each user set the Windows configuration to their liking and/or company policy. Win Updates should be set to Notification ONLY, so they do not interfere with on-going work. They download/install whenever they are not doing anything.

Read other 1 answers
RELEVANCY SCORE 74

as I do with Windows 7? or there is a special set of drivers for Server OS?

I just installed Windows Server 2008 R2 SP1 for a client, I just want to be sure before I screw something up.

A:Do I install mobo drivers the same way for Windows Server 2008 R2...

When I set my 2008 server up I used the drivers labeled server if available, or the regular Win 7 drivers if they weren't. As I recall, server 2008 didn't need much if anything for the motherboard as the default drivers did the job. The problematic ones for me were for a scanner.

Read other 3 answers
RELEVANCY SCORE 73.2

Hi All,

I am planning to buy Dell Precision 650/670 with approximately the following configuration:

DELL PRECISON 650
Intel Processor XEON 2.8GHZx2 (Dual)
Intel Motherboard 7505 CHIPSET
2 GB ECC DDR1 RAM
Supported Interfaces : IDE/SATA/SCSI
Harddisk: Optional
Optical : Optional
AGP Graphic Card
300 Watt POWER SUPPLY

I plan to run a server application on these machines, on either Windows 2003 or 2008 Enterprise Server.

I have searched the dell.com website and cannot find any drivers for these models for Windows 2003/2008 operating system.

So I just want to know that are there any working drivers (for all the system components) available for these models for Windows 2003/2008 operating system.

Has anyone been using these systems in a similar setup/environment.

Please share the drivers/links any other performance considerations necessary.

Thanks for your help and guidance.
 

A:Windows 2003/2008 Server Drivers for Dell Precision 650/670

http://downloadcenter.intel.com/Sea...+Chipsets&ProductProduct=Intel®+E7505+Chipset

http://www.intel.com/p/en_US/support/highlights/chpsts/e7505
is this correct??
 

Read other 2 answers
RELEVANCY SCORE 72.4

Hi

I have already installed sql server 2008 r2 and serivice pack3 in my windows 8 ,but now i want to install sql server 2008 r2 with advanced service for extra features. but when i try to install advanced service, compatible issue raised. how can solve this problem?

Read other answers
RELEVANCY SCORE 67.2

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 65.6

I have a Radeon 5770 video card and want to try it out with Server 2008 64-bit but can't find any drivers on the ATI site. Any suggestions? I would like to try playing some games and need the full capability of the card.

Can I just install the Vista drivers?

Please no "why do you want to use Server for games?" -type comments, I am just trying something out as an experiment, and intend on later switching to Windows 7.
 

A:Radeon 5770 Drivers for Server 2008

Have you tried google?
 

Read other 3 answers
RELEVANCY SCORE 65.2

I'm trying to play minecraft and other games but they don't load or display correctly.

Computer: Sony Vaio VGN-CR31Z

All the drivers I download aren't compatible.

Before Win 8 everything worked fine with Intel Centrino.
But Windows Basic Display Adapter is horrible and the only compatible.
Does anyone have any drivers that would work? Everything I've downloaded is not compatible.
Even the Sony Europe website doesn't have the correct drivers, it just makes my resolution weird.
Also my PC needs a driver with OpenGL.. for MC.

Thanks :'D

A:Can't find any drivers compatible for my laptop.

According to my quick Google search, your laptop has the ATi Radeon X2300 graphics card. There are some threads in this forum section about legacy drivers that MIGHT work with this card. You should check them out.

Read other 13 answers
RELEVANCY SCORE 65.2

Okay, so I'm trying to run the Sims 2 on my computer but it's telling me I don't have DirectX 9.0c compatible drivers. I don't know what kind of video card I have, so I don't know where to get these drivers. When I try to go to the Device Manager to check, it tells me that Windows cannot find mmc.exe

Help?
 

A:No DirectX 9.0c compatible drivers and no way to find out what I need

What pc have you got and what windows version is on it????
 

Read other 9 answers
RELEVANCY SCORE 63.6

This is more of a post complaining than it is asking for help/advice.

Screen corruption has been a problem with every version of the nVidia driver's I've used, with the possible exception of the default ones Microsoft ships with Vista. I've tried whatever it was just before the 100.65s, then I tried the 100.65s, 101.70s and now 158.18. The problem has not gotten any better throughout all of these revisions.


This is what you see when Vista asks for your permission to do something. Notice how the continue button isn't even visible initially.


Now the continue button appears when the mouse is hovered over where you guess the button to be.

Hardware involved here is a eVGA 7800gs co AGP card. The pictures were taken with 158.18 drivers. The corruption isn't usually capturable with print screen, although after an "episode" with VLC it was and I got a screenie of it shoot me a message if you want to see it, but it contains some text that violates the TOS of this board. Basically everything is not displaying except the taskbar, and a few items I've drug the mouse over.



That is what happens if you open an app that drops Vista into Classic mode, the app that caused that was Trillian. On the right side of that 2nd pic was my Trillian buddy list AFTER I had minimized it. It shows up all washed out white in that pic because of the horrible lighting conditions for a digital camera shot, but in reality it was displaying... Read more

A:NVIDIA drivers for Vista suck (updated to include Win 7 and Server 2008 r2)

Perhaps your trouble is elsewhere. nVidia is universally rated by users (including this forum) as the best for video cards and for drivers. We see no special problems between VISTA and nVidia...
There are always troubles that crop up because video graphics cards are so fragile, but I would not consider a blanket indictment of nVidia as valid.
I would be more likely to consider power supply and memory.
 

Read other 44 answers
RELEVANCY SCORE 63.2

Hello,
I created the following performance counter using logman.exe. 

logman.exe create counter US_Triton_Perf_Log -b 9/23/2015 09:30:00 -e 9/30/2099 18:30:00 -r -s $server -si $frequence -cf $folder\$server.txt -f $logtype  -o C:\local\logs\Perfout_$Server --a -v mmddhhmm  -rf  $max_duration

When I do this across multiple servers specifically for Windows Servers 2008/2012, the counter is created to repeat and run everyday at 930PM and stops running everyday at 430PM. This works perfectly fine as intended. However, When I do this for a Windows
2003 server, my created counter is very different.
For example, in this case, I have set to the counters to start at 930AM and end at 1830PM, because I have set a maximum duration of 9 hours, the job terminates and begins on the next day, since I have the repeat option on. However, this does not apply to
our 2003 server; logman creates the job to run once a week in this case it would be on a Wednesday. In addiiton, I noticed that the job doesn't not even start at it's indented time. It actually does not start at all. I also notice that the jobs on all windows
2003 servers are created in a pending status, which then prevents me from removing the counter remotely. 

I would like to know if windows 2003 is capable of working like my win 2008/2012 servers using logman, and if historically, the job has to be kicked off through scheduled task. 




Both Jobs are using the same criteria, but a... Read more

Read other answers
RELEVANCY SCORE 62

I have 2 servers; windows 2000 & windows 2008, I can always access them via XP but my system 7 home can't authenticate. It appears to add the domain name as a preamble my user name in the authentication....does this make sense?


thank
-Jeff

Read other answers
RELEVANCY SCORE 61.6

We have a requirement to get the windows services from one of our remote server. We already have a group with admin rights on that machine and users added to it. But while fetching the services from that details we get below error.
We are using C#.net to fetch the services.
Error:
InvalidOperationException Was caught
Cannot open Service Control Manager on computer :"". This operation might require other privileges.

Read other answers
RELEVANCY SCORE 61.6

Hi, I am going to install windows 2008 server on the IBM server x3650 7979 and couldn't get the supportive RAID Serv as the I am currently got the IBM ServerGuide Setup and Installation CD version 7.4.17 for adaptec RAID controller 8K but it does not have windows 2008 server option. Do assist me in this regard. thanks
 

Read other answers
RELEVANCY SCORE 60.8

As my final project for the year i am setting up a server that we will eventually move all our computers on to. I am using a poweredge 2900 as a server with windows server 2008 installed. As of now i have 2 computers connected to the domain which they can log on to.

- what i need help with
- How do i give all users access to programs?
- Each student needs to have access to her own drive through the server not locally.
The client computers are connected to a switch using dhcp.
Any help would be greatly appreciated.

A:setting up a server for school help (windows server 2008)

I'm quite sure your instructor/teacher did not intend for anybody but you to do the final project for the year and nobody else.

Read other 9 answers
RELEVANCY SCORE 60.8

We had:

1) 1 Windows Server 2003 running Active Directory services to manage logon and permissions for file sharing.
2) 15 workstations.

We now want to have:

1) 1 Windows Server 2008 R2 server running Active Directory services to manage logon and permissions for file sharing.
2) 15 same workstations, with their same user profiles.

So I joined the 2008 R2 server to the domain, and then used the dcpromo tool to make it a domain controller.

Problem is, whenever I take the old server offline, (the 2003 one) everything flips out, logons are slow, and the 2008 server gives people trying to access shared files weird errors like that the server that authenticated them cannot be contacted, and asks them to log in again with their username and password before accessing shared files on the server.

What did I do wrong? I must be forgetting something.
 

A:Replacing a Windows 2003 AD DS server with a 2008 R2 AD DS server

1. Transfer all FSMO roles to your 2008 R2 server
2. Uninstall AD on 2003 server
3. You can now permanently take 2003 server offline
 

Read other 13 answers
RELEVANCY SCORE 60.8

Hi guys,
 
What free Antivirus software for servers?
What free anti-malware would NOT be a good idea?
 
Info:
My friend has purchased a Poweredge server to act as a fileserver for a private network not connected to the internet..  He uses 2 laptops at the most  to access files on the server.
 
However at some points he will update Windows Server 2008 plus odd bits by temporaily hooking up to the Internet., and obviously leave himself open to malware etc. for a short time.
 
The cost of server Antivirus is very high and usually effective for 10 workstations upwards, and obviously he would appreciate keeping costs down.
 
 
Questions:
I would appreciate thoughts on ideas for avoiding a costly solution.
 
Also, if he got Malware on it (e.g. Rootkit or Delta) would current Bleeping Computer tools (e.g. Rkill, RogueKiller etc) still work on the server - or does it require another approach? 
 
I am asking fior advice BEFORE he gets started while options are open.
 
 
Thanks in advance guys
 
 
 
 
 

A:Free Server Antivirus ? e.g. for Windows Server 2008

The answer is fairly simple. Just read the details on the site -
Microsoft Security Essentials is available for small businesses with up to 10 PCs.
 
• Microsoft Security Essentials:
Microsoft updated it’s free Anti-Virus solution at the end of 2010 to support Windows 2008/R2.
This is easily one of the better free offerings as Microsoft has updated this solution to complete directly with some of the biggest solutions, such as Mcafee and Symantec paid versions.

When downloading, simply choose Windows Vista / Windows 7, as Microsoft has yet to update the website.http://www.microsoft.com/security_essentials/
 
Regards -

Read other 6 answers
RELEVANCY SCORE 60.8

I have a file server at home with a Quad core, 4gb ram, and a 3tb of storage. It is running Ubuntu Desktop and sharing video files primarily. From my school I have access to a free copy of Windows Server 2008 R2. Other than the server I have 2 Windows 7 desktops, 1 Windows 7 laptop and 1 Windows Vista laptop.

I am interested in moving to a Windows setup as I am done with the ?Ubuntu? experiment. WHS looks like what I need, but I have a free copy of WS 2008 and I would miss the $50 for WHS. My goals can be described best as:

Need to Haves:
? File/media server (local network)
? Dedicated game server for various games for friends.
? Print server

Nice to Haves:
? Music/Video Streaming over the internet
? Automatic backup server
? File server over the internet
? Ability to manager other PC?s from the server

My ability as an admin:
? No experience
? Willing to learn and put forth initial effort to get setup
? Don?t have time to really spend more than 1 day moving from Ubuntu to the new setup.
? Don?t want to be stuck constantly screwing with things to get it right or keep it running.

What is going to be best option for my situation?

A:Help choose: Windows Home Server 2011 vs. Windows Server 2008 R2

Honestly, I use both in their proper settings, and unless you have a domain at home with multiple users, Windows Server 2008 R2 is overkill...and would require much more tweaking and add-in apps to do what you want. Given your write-up, WHS 2011 is the way to go. It does much of what you want out of the box, and is designed for people who don't want to become server admins (or at least not be forced to).

Read other 2 answers
RELEVANCY SCORE 60

Hi all
Have been a LONG LONG user of Linux as a server (hosting VM's XP / W7 mix) and file / print sharing.

I used to avoid MS like the plague as far as SERVER environments are concerned - probably because my first experince was Windows NT (Windows NeanderThal or Windows No Thanks) which was SO HORRIBLE that it put me off Windows servers for ages.

(Note I'm using a server in a HOME environment where we have around 8 machines (most of which are actually mine for testing -- not a corporate environment which has other considerations).

The problem now with the latest Linux distros that they are trying to be "A Better Windows than Windows". You can of course customize them but I haven't got the time or patience to do this any more. To select what packages to install / leave out now is a 100% pain and if you do it wrong the chances are the system will give errors.

I've looked at the new SUSE 11.2 -- slick and polished - bit I don't NEED "an alternative Windows".

I've just been looking at Windows Server 2008 R2 (got it from Technet) and I'm REALLY IMPRESSED with it so far. I've installed the STANDARD version - you don't need datacenter or Enterprise version for a home server.

It runs vmware server on it just fine (although I might go the whole hog and use the Hyper-V virtualisation -- need to do a bit more research).

I'm quite happy letting MS do the updates than having to mess around with Kernel compiles etc.

Incidentally as a HOME server there ... Read more

A:Windows 2008 Server or Linux for server

Windows servers have come a very long way in the last few years, I will never use a linux server ever again.

Read other 9 answers
RELEVANCY SCORE 60

I'm trying to decide between Windows Home Server and Windows Server 2008 R2 for my home server PC. Ordinarily it would be a clear cut choice, but I've got a free copy of Server 2008 R2 through my academic MSDN subscription. I'd like to avoid spending extra money if Server 2008 R2 would do the job. But I'm willing to buy Home Server should it prove necesary. Any input is appreciated. Thanks.

A:Windows home server vs Server 2008 R2

Server 2008 R2 is a more fully functional product. You will be able to do similar things, but it might be a little more involved getting it set up and working. Plus, if you are interested in IT, you could use the Server 2008 R2 experience....but you won't get hired for your knowledge on Windows Home Server.

My vote is Server 2008 R2 without a doubt.

Read other 9 answers
RELEVANCY SCORE 59.6

One of my clients purchased a "stand alone" 8 camera DVR. DVR-X 9100 server.
all cameras and system were working fine until last week when suddenly when we start up the system, says " Driver 0% not found" Then, we get error, Either dvr not installed or driver not found. The system is windows based. System recovery is off.
The company they purchased from is not responding, when they purchased they were not given any disks or anything. Bottom line, where can I find the drivers for this unit OR should I just find and install a new DVR board and get the installed cameras back up?
Please let me know your opinions.
Thank you
 

Read other answers
RELEVANCY SCORE 58

Hello,
In the DISA Security Technical Implementation Guides (STIGS) there is a test for event tracing (#V31026). 
The STIG indicates that if you are running Win 2008 the absence of etwenable = false is not a 'finding' because event tracing is enabled by default (on 2008 servers) and it should be enabled and running.
Is this the same for windows 2008 R2 Enterprise Server?
I cannot find the element etwenable in my 2008 R2 Enterprise server test system, it does not exist.
Does that mean the requirement for the STIG is met, and event tracing IS enabled by default on Win 2008 R2 Enterprise Servers?  No further action is required to enable? 

Is there an easy way to verify it actually is enabled?  Check registry value, run script?

Excerpt from the STIG:
Microsoft Dot Net Framework 4.0 STIG
Rule Title:  Event tracing for Windows (ETW) for Common Language Runtime events must be enabled.
STIG ID: APPNET0067  Rule ID: SV-41075r1_rule 
Vuln ID: V-31026
Severity: CAT II Class: Unclass
NOTE:
Beginning with Windows Vista and Windows Server 2008, ETW Tracing is enabled by default and the "etwEnable" setting is not required in order for Event Tracing to be enabled. 
An etwEnable setting of "true" IS required in earlier versions of Windows as ETW is disabled by default.
Thank you,
V/R
Bill
William C. ?BC? Davis PMP, CISSP, IASO
Lead Infosec Engineer/Scientist
Comm:   781.271.5221
DSN: ... Read more

Read other answers
RELEVANCY SCORE 57.6

Hey all,

I'm inexperienced with Windows Server 2008 and am setting up a "lab" or test server here at the company I work for's network.

In the intial configuration process, when setting up the Active Direct Domain Services, I'm stuck at the DNS server

Questions are...

-Do I install it?
-Will this interfer/mess up things with our main file server?

Sorry, a bit amateur with this stuff

Any help is appreciated
 

A:Windows Server 2008 - DNS Server..?

Bump...

Anyone?

Thanks
 

Read other 3 answers
RELEVANCY SCORE 57.6

how can i remove all my old computer programs from my new hp slimline desktop260-po26 . mircosoft keeps loading all my old computer stuff everytime i hook up my att internet connection 

A:how to remove window server 2008 2008 sp1,sp2 vista,sp1,sp2,...

chuck5014 wrote:how can i remove all my old computer programs from my new hp slimline desktop260-po26 . mircosoft keeps loading all my old computer stuff everytime i hook up my att internet connection Could you clarify what you're having a problem with?   Post a screenshot if possible.

Read other 1 answers
RELEVANCY SCORE 56.8

I need to run ipmsg in all my client  when a user log on. I have tried in computer confuguration but it doesn't work any idea

Read other answers
RELEVANCY SCORE 56.8

Hi,

I have just installed Windows Server 2008 trail and i need to create a password but i have tried different lengths and numbers and i cannot login.

It says i have to create a new password but iv tried everything. I have searched on google but i cannot find anything. Does anyone know what i can do?
 

Read other answers
RELEVANCY SCORE 56.8

Is Windows Server 2008 Std/Ent MAK B or
Windows Server 2008 Std/Ent KMS B considered an Enterprise version? If not what is the Std/Ent from the
License Details website?
We are trying to get over 4GB of Ram and hopefully not having to purchase a 64-bit '08 version.
Thanks in advance

A:Windows Server 2008 Std/Ent MAK B

Hello Glueck,
The Std/Ent means those keys work for either Standard\Enterprise, they also work on either 32-bit or 64-bit versions, both of which should be available from the Volume License website.  The MAK B key is probably the one you want to use, the KMS
B is used to setup a KMS host machine that will then activate other Windows Server 2008 KMS clients Enterprise sku or lower as well as Windows Vista KMS clients.Thanks, Darrell Gorter This posting is provided "AS IS" with no warranties, and confers no rights. Volume Activation documentation on TechNet http://technet.microsoft.com/en-us/windows/dd197314.aspx http://technet.microsoft.com/en-us/library/dd996588.aspx
VAMT - Volume Activation Management Tool - Download link http://www.microsoft.com/downloads/details.aspx?FamilyID=ec7156d2-2864-49ee-bfcb-777b898ad582&displaylang=en

Read other 3 answers
RELEVANCY SCORE 56.8

Can I install Windows server 2008 R2 on my external hard drive so that I can use it as means to practice network on my laptop?
 

A:Windows Server 2008 R2

Windows switches from the bios usb drivers to it's
own during boot,which would cause a usb drive
installation to crash.
I would suggest you consider using some virtual machine
software so you can run it from an image on your windows drive.
 

Read other 1 answers
RELEVANCY SCORE 56.8

Hi
I decided to install windows server 2008 onto a virtual machine and play around with it and try to learn.
I've messed around with lots of stuff on it. The two things I would like to get working are FTP and VPN into the server. I've sort of managed to get ftp working. I can access it using the private ip address of 192.168.2.13, but when I try to access it with my public IP this is where the problem starts. Port forwarding is set correctly on my wireless router, port 21 is being forward to 192.168.2.13. So when I go type ftp://publicipaddress into my web browser it pops up asking for the username and password. This is where I?m stuck. I have no idea what it is, I?ve messed with lots of the settings and whatever I do it still asks for this username and password, even though if I access the ftp server through my LAN using the private IP address it doesn?t ask for a username or password, it's only when using the public ip that it asks. Anyone got any idea's how I set the username and password to something I actually know?

Secondly.
I would like to be able to VPN into the server. I did follow a guide, but it didn?t work when my friend tested. Could someone point me to a nice guide on how to achieve this?
I'm more interested in getting the ftp to work for now.

Thanks all!
 

A:FTP and VPN into Windows Server 2008

the Virtual server is run under a specific user-id; I think you need that id and password

<ctl><alt>del will get the task manager and the column name User Name is what you need.

scroll to the process controlling the VM

you may need to alter the settings for the VM to force it to run under another
specific user which you can set the pwd
create new account
set new password for it
login to that account to create the %profile% area​then assign the VM to run under that login
 

Read other 3 answers
RELEVANCY SCORE 56.8

All my windows 7 wireless laptops connect to nps and get authenticated. Windows 8 on the same hardware cannot to wireless. Tried to load the certificate locally but still cannot connect. Thanks for your help.

A:Windows 8 and 2008 r2 server

Originally Posted by Rgrove86


All my windows 7 wireless laptops connect to nps and get authenticated. Windows 8 on the same hardware cannot to wireless. Tried to load the certificate locally but still cannot connect. Thanks for your help.



Welcome to the forum Rgrove86.

Do you have Windows 8 Pro version to connect to this Domain?

Read other 8 answers
RELEVANCY SCORE 56.8

Anyone know of forums like these for the R2 beta of Windows Server 2008? I'm testing it as well and would love to read more about it from users.

A:Windows Server 2008 R2

  
Quote: Originally Posted by FreakyFerret


Anyone know of forums like these for the R2 beta of Windows Server 2008? I'm testing it as well and would love to read more about it from users.


"And Thus spake the Lord - Blessed are those that Possesseth the Power of the Almighty Google for they shall inherit true Riches".

Actually this Forum is fine -- I've been using it too. There's a special section as well on the R2 beta of Windows server 2008.

Windows Server 2008 Forum

Hope this helps

Cheers
Jimbo

Read other 3 answers
RELEVANCY SCORE 56.8

i want to know difference between win server 2008 and win7 that oly i want to know

A:windows server 2008 rc

There are lots of differences. One is a client (win7) and 1 is designed to be a server (2008). The server offers various basic network services such as DHCP, DNS, WINS, VPN, Active Directory, Certificate Services, IIS Web Server, FTP Server, etc. Server 2008 is far more expensive to buy licenses for.

Read other 1 answers
RELEVANCY SCORE 56.8

so i know this is a windows seven forums, but i wasnt sure where else to post so please excuse me

I purchased windows server 2008 a while ago and have misplaced the CD, luckily i have backed it up by copying it (backup freak haha)

now my problem is i need to reinstall it but cannot boot from the CD, i have first boot device set to CDROM drive in the BIOS and it doesnt read it and give the option to boot from it?

any ideas on how i could burn a boot image to make it bootable?

Thanks in advance!

A:Windows Server 2008 help please

Hello mate, have a look at this link below and be sure to post back with any further questions you may have and to keep us informed.


How to create a Windows Vista / 7 installation disc using ImgBurn

Read other 6 answers
RELEVANCY SCORE 56.8

our server came pre-installed, how can i get the installation media
we're no longer under warranty, and it needs rebuilt

Read other answers
RELEVANCY SCORE 56.8

Hi all,

I have a server running 2008 r2 and have been having random BSODS for a long time and have no clue as to what it can be since im not trained in the area of debugging at all.... not much time to problem solve on the machine either since... tis a server serving a business so it needs to be up all the time...

I will provide full memdumps and any logs needed if someone is able to help me resolve the issue??!!

HUGE thanks in advance lol!! ;-)

I've uploaded a cpuz screen of the system details

I will provide any more details needed as requested.. :-)

A:Windows Server 2008 R2

The minidumps from bluescreenviewer are here I: -


==================================================
Dump File : 072715-22635-01.dmp
Crash Time : 27/07/2015 11:21:05
Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x000000d1
Parameter 1 : fffffa84`0deac084
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000001
Parameter 4 : fffff880`030e99ed
Caused By Driver : Msfs.SYS
Caused By Address : Msfs.SYS+8829ed
File Description : Mailslot driver
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : x64
Crash Address : ntoskrnl.exe+74ec0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\072715-22635-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7601
Dump File Size : 271,902
Dump File Time : 27/07/2015 11:22:43
==================================================

==================================================
Dump File : 072515-22464-01.dmp
Crash Time : 25/07/2015 19:01:58
Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x000000d1
Parameter 1 : fffffa84`0deca3fc
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000001
Parameter 4 : fffff880`02fca9ed
Caused By Driver : Rt64win7.sys
Caused By Address : Rt64win7.... Read more

Read other 1 answers
RELEVANCY SCORE 56.8

Where is the Hp company , Why They not give us a Drivrs for our laptop, Our works on the windows server 2008 R2,What we will Do in this case, Where Hp Companyyyyyyyyy!!!!!!!!!!











Solved!
View Solution.

A:Windows Server 2008 R2

Hi NazarAL-WATTAR,

 

Glad to hear that worked for you. I have included a couple of links below for you. The first is a link to your computer's home page. From there you can select How To which will give you lots of information about the computer. There is also Product Information, User Guides and Drivers.

 

http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&product=5292805

 

If you need the TouchPad drivers, I have a direct link to them for you here.

 

http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104704-3&cc=us&dlc=en&lc=en&os=4063&product=5292805&sw_lang=

 

Let me know if you need any further assistance.

 

Thank you,

 

 

Read other 10 answers
RELEVANCY SCORE 56.4

Hello all,

I am the new IT guy for a small business, and their server doesn't have an AV program. I'm wondering if there are any worthwhile free AV programs (which I would much prefer) for Windows Server 2008 , or if I should ask the owner to invest in one. Currently the company has AVG (some free and some licensed, I guess) on most client machines. Their system as a whole is a mess, but it's a new server domain that hosts some shared files and I'd like to keep it protected. Advice?

Thanks!

A:Windows Server 2008 Antivirus?

Is that Windows Server 2008 64 bits?
And is this their only server?

Read other 10 answers
RELEVANCY SCORE 56.4

The following fatal alert was received: 70.

this system error is keep coming everyday. Thanks.

Read other answers
RELEVANCY SCORE 56.4

I had this issue back in April, and I updated my Intel NIC drivers and I haven't had this issue since. Today, it happened again and I updated the drivers again with Windows Updates. When it rebooted to the desktop, it BSOD again a few minutes later. Not sure what is causing this. I looked at the minidump and couldn't find anything. But, was wondering if you guys could take a look incase I wasn't seeing enough information on the dumps.

I am using this machine to present iSCSI targets to another machine.

A:Windows Server 2008 BSOD tdx.sys

Hello StrongMan.

It is caused by Symantec/ Norton Network Dispatch Driver.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {6, 2, 0, fffffa6002fce545}

*** WARNING: Unable to verify timestamp for SYMTDIV.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMTDIV.SYS
Probably caused by : tdx.sys ( tdx!TdxSendDatagramTransportAddress+1d5 )

Followup: MachineOwner
---------
Description here: Driver Reference Table - SYMTDIV.SYS

I'd suggest you to uninstall Norton and all Symentec products using Norton Removal tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner. (I hope MSE can be used with your windows version.)

Download and install those, and then run full system scans with both of them, one by one.

Let us know the results.

Read other 3 answers
RELEVANCY SCORE 56.4

Hi all

Looking for some advice regarding adding an email client to our server. Rather than just jump in and install a copy of Outlook, I wanted to check if there are any similar/better alternatives I could look at. We have recently installed some Project Management software that requires this for raising invoices, so integration across all users is important, in case that makes a difference to what options I can consider

Thanks in advance.
 

Read other answers
RELEVANCY SCORE 56.4

The Microsoft website is mostly geared for corporates, so how does a home user get a copy of Windows Server R2?

I want to use it for Sharepoint 2010 Foundation self training as I am interested in learning more about multi tenancy.

Is there a cost effective way I can achieve this?

A:Best way to get Windows Server 2008 R2 for home use

  
Quote: Originally Posted by jnevans


The Microsoft website is mostly geared for corporates, so how does a home user get a copy of Windows Server R2?

I want to use it for Sharepoint 2010 Foundation self training as I am interested in learning more about multi tenancy.

Is there a cost effective way I can achieve this?



Welcome to the Windows 7 forums Jnevans.

Microsoft has a trial version of server 2008r2 at

Microsoft Windows Server 2008 R2

that page should give you a start, Also you can buy windows home server
which might do what you need.

Rich

Read other 2 answers
RELEVANCY SCORE 56.4

Hi
after migrate windows 2003 to 2008 R2, when I tried to print, it shows the error below.
I have reinstalled the printers drivers, run as admin, and reboot the server.
any suggestion? 





<errorDetails
            text="NW.native99: Error in native code: 7!Exception in Documents.Open (D:\edTemp\word2pcl45080.doc/) (Code=-2146823191, &quot;There is insufficient memory. Save the document now. 
(D:\edTemp\word2pcl45080.doc)&quot;) (source=D:\edTemp\word2pcl45080.doc, destination=D:\edTemp\word2pcl45081.prn, printer=RenderPS, collate=off)"
            messageKey="NW.native99">com.insystems.distributor.services.rendering.RenderingServiceException: NW.native99: Error in native code: 7!Exception in Documents.Open (D:\edTemp\word2pcl45080.doc/)
(Code=-2146823191, &quot;There is insufficient memory. Save the document now.  (D:\edTemp\word2pcl45080.doc)&quot;) (source=D:\edTemp\word2pcl45080.doc, destination=D:\edTemp\word2pcl45081.prn, printer=RenderPS, collate=off)
 at com.insystems.distributor.services.rendering.NativeWrapper.newException2(NativeWrapper.java:268)
 at com.insystems.distributor.services.rendering.RenderingPipe.renderAll(RenderingPipe.java:775)
 at com.insystems.distributor.services.rendering.NativeWrapper.render(NativeWrapper.java:144)
 at com.insystems.dist... Read more

Read other answers
RELEVANCY SCORE 56.4

I have got a server which is having Windows Server 2008 Standard Service Pack 2 32 bit Operating system installed on it. Is it possible to find out if this machine is capable of supporting Windows
Server 2008 R2 Standard/Enterprise 64-bit SP1?

Read other answers
RELEVANCY SCORE 56.4

Trying to figure this out, anybody know how to tell?

Thank you

A:Do i have Windows server 2008 SP1 or regular 64 bit SP1 ?

Click Start, right-click Computer [or My Computer], click Properties, should tell what you have and will include whether it's a 32-bit or 64-bit version. A 64-bit computer can run either 32-bit or 64-bit OS [not at the same time] and either 32-bit or 64-bit programs but a 32-bit machine is limited to 32-bit software.

Read other 5 answers