Over 1 million tech questions and answers.

2TB new hard drive and Sata Cable

Q: 2TB new hard drive and Sata Cable

I currently have an SSD with the OS on it.

I have a 500GB hard drive about to fail that has all my games and programs.

I have a new 2TB HD and a SATA cable.

My question is what is the best way for me to move all my programs and games over to this new hard drive?

Thanks,

H

Read other answers
RELEVANCY SCORE 200
Preferred Solution: 2TB new hard drive and Sata Cable

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 82

I want to transfer data from my hard drive in my laptop (Lenovo Y480) to a hard drive in my desktop. the cables for the sata adapter do not fit the hard drive from the laptop. Is there a different form for a 2.5 hard drive and a 3.5 hard drive?
 

A:sata to usb adapter cable dosen't fit sata hard drive in laptop?

Does the drive have an adapter need to remove to expose the SATA conenctors? I don;t see anything about the Y480 not having a standard SATA drive and laptop and desktop SATA connectors are the same.

Maybe post pictures of both the drive and your SATA cables.
 

Read other 2 answers
RELEVANCY SCORE 76.4

hi guys,

I have just built a computer with the following spec
intel 2.6 E5300 dual core processor,
gigabyte GA-73PVM-S2 motherboard with graphics and audio,
hanns g 19 inch widescreen monitor via dvi,
sony SATA dvd rw,
western digital 500 gb sata hard drive (WD5000AKS)
4gb corsair ddr2 ram
WIn XP SP3

In Bios my sata hard drive is assigned as IDE and if I assign it as RAID or AHCPI it gives an error and I cant boot to XP. No big issue there. The hard drive is connected via a sata cable and so is the DVDRW. What I want to know is if my hard drive is working as a SATA drive. WHat is the way to check this please ? Just wanna make sure that the pc is at optimal.

Also, my SATA DVDRW only has two connections, as far as I can see, sata and power. My motherboard has a CD in, how do I connect a CD in cable to the DVDRW or is this not necessary because it is connected via a sata cable ?

many thanks
 

A:sata hard drive and cd in cable for dvdrw

anyone ?
 

Read other 1 answers
RELEVANCY SCORE 76.4

I just made a mistake and put a locking type SATA cable in my computer and now cannot get it out. The idea is good but the design leaves a lot to be desired. I am afraid of damaging the motherboard by just pulling this thing out of the socket.

I have another identical cable to look at and experiment on and pressing on the metal device on the sides of the head does not do anything that I can see.

Is there a secret to getting these out of the sockets? Once out, I will not be using these again.

Thanks
 

A:How to unlock SATA hard drive cable?

Actually, pushing the metal release does depress the two small latches. Try this. Depress the metal release, and put the connector INTO the board first and wiggle it around gently. Then, gently pressing it away from the metal catch, try to remove it.
 

Read other 1 answers
RELEVANCY SCORE 75.6

hello! i recently got blackscreened on my old dell. it would boot up to the log in screen and allow me to pass but would not load from there. from what i read online, this SATA cable would allow me to access my hard drive on another computer to possibly save some files. when i plug it in to the new computer, it recognizes the drive but when I click on it i get "Access is denied." I tried to go to settings-security-allow user permissions to access. When I did that I could see some file names I recognized flash by on the screen but it still wont allow me access. any help is greatly appreciated!!
 

A:trouble accessing hard drive via SATA cable

http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CCsQFjAA&url=http%3A%2F%2Ftechnet.microsoft.com%2Fen-us%2Flibrary%2Fcc753659.aspx&ei=FyVXU46RFufZ2wXW5YGABg&usg=AFQjCNEjdekykpsYrvL4JcIQn4F0BpgEnQ&sig2=XQw2Q3LkdVaFGZjbynmu_g&bvm=bv.65177938,d.b2I
 

Read other 1 answers
RELEVANCY SCORE 75.6

i have 2 old hard drive's with some data in them and im trying to retrive it back to my current computer.
one of the drive's works perfectly, but when i connect the second drive it kills the cable totally.
i cant use the cable anymore.. even for the first drive.
it happend for the second time already so i figured out the hard drive is the problem..
any ideas how to fix the problem? what should i do?
 

Read other answers
RELEVANCY SCORE 75.6

I finally loaded my window xp media center on my brand new Seagate 320gb SATA 3.0g/s transfer rate hard drive 7200.10 series and the next day the computer wont turn on at all dead. My thoughts were first the power supply went bad or bad power cable to power supply but after checking all connections and possible options i found out that it was hard drive related. I thought it was my hard drive at first because only when the power cable was connected was when the computer wouldnt power up at all and it would shut off if i tried to connect it while computer was running. The hard drive also smelled like an electrical fire so i thought i fried the mother board on the hard drive or it froze on me. I sent it back in the Seagate warranty and they gave me a factory repaired unit. I used a temporary hard drive (WD 60gb IDE not SATA)for the time being with windows xp proffesional on it and worked completely fine no problems at all. As soon as i got the new hard drive i found out that the new hard drive didnt fix the problem i had before and in fact it got worse. The computer will run but somewhere where the red cable connector meets the hard drive power connector is where it starts smoking and burning up. So im thinking it could be the power cable itself because i was using the same SATA power cable as before but im not totally sure yet? any suggestions
 

A:SATA hard drive power cable shorting?

You can have a defective connector. As a test, use a molex>sata power adapter to connect the sata drive to a standard molex connector ie the same one you used for the ide drive.

Next have you given the sata connector a VERY close inspection with a bright light?
 

Read other 2 answers
RELEVANCY SCORE 74.8

were would I get a splitter canle for sata hard drive

A:Install second hard drive need a sata data cable splitter???

Hi, You can't split SATA data signals.  SATA power yes, but data no.

Read other 1 answers
RELEVANCY SCORE 74.8

I just bought a couple Barracuda drives on eBay and want to install in my desk top LeNovo computer.
There is a couple cables free but only one fits the drive. The other 4-pin ones don't. There must be some sort of adapter for this.
Appreciate some help.
Thanks,
KJ
 

A:Cable(s) for SATA hard drive - Seagate Barracuda, in LeNovo

We would need to know which exact Barracuda drives you bought and your exact motherboard or atleast the model of the Lenovo in order to provide any useful guidance.
 

Read other 3 answers
RELEVANCY SCORE 74.8

Hi, I'm looking for a reliable power cable for a SATA hard drive, which one(s) would you recommend?
 

A:reliable SATA hard drive power cable recommendation

Read other 16 answers
RELEVANCY SCORE 74

Hello, I have some issues with my c540 all in one touch. A couple weeks ago, I noticed a burning smell coming from inside the pc, and then a little smoke. There was also a clicking sound from the speakers after I turned it on. Of course I turned it off, and unplugged it all. I did some research then on my other pc, and found that this was/is an ongoing issue within this particular pc. Isn't anything being done about this, to ensure people don't end up being killed? Luckily, I caught it in time, and was able to purchase another sata cable on ebay, but I shouldn't have had to do that. What if I wasn't home? The whole house could have burned down, and our pets would have been here!! Again, I bought another sata cable, but I'm really on edge, fearing it will happen again.  I also have another question - where can I find a list of parts that are compatible with this all in one? I want to replace the ethernet card, if possible, as it's not very good, neither is the wifi. I would like to have someone within lenovo comment on the burned cable issue, and please don't say you don't know anything about it, it is apparently a huge and widespread issue.You can see the melted bit. This all happened after only being on for about 1-2 minutes.?This is the burned part on the internal metal casing near the MB. I scraped it, to see how bad it was.?

























20... Read more

Read other answers
RELEVANCY SCORE 74

I have a Dell Inspiron 1545 laptop. I recently developed hard drive trouble and have had to order a replacement.

Instead of installing Windows 7 all over again, with all the drivers, etc., I want to clone my existing hard drive to the new one.

I intend to connect one of the hard drives to my system via a USB SATA cable with the other drive connected inside my system.

To test this, I removed my hard drive and connected it using the USB SATA cable that comes with Seagate Hard drives (Amazon.com: Seagate FreeAgent GoFlex Cable - USB 2.0 STAE100: Electronics)

I tried booting up my laptop using this setup.

The BIOS does detect the OS on the hard drive and attempts to boot from it, but flashes the BSOD when the Windows logo appears on the screen and reboots to a message that says that I should reseat the hard drive.
It then goes to a menu that asks me if I want to run startup repair or boot normally. Selecting "boot normally" repeats the process.

Any help? What can I do to rectify this problem? And more importantly, how can I make sure that my cloning process will go off without any trouble? I intend to use DriveImage XML for the cloning.

A:Unable to boot from Laptop Hard drive connected through USB SATA cable

Windows 7 will not boot and run from a USB drive.
However, that should not interfere with your ability to clone the drive using a USB connection.

Read other 2 answers
RELEVANCY SCORE 74

Hi there, im wondering if there is anything wrong with running three hard rives off the same power source. Basically coming form my power supply (antec 550 watt) im looking to split a single molex into three SATA power cables for the three hard drives b/c i have the molex to sata power splitter to do so. This way the case can stay a bit neater. But am not sure of the reprcussions of doing so if any.

I can see in the case of a power surge that there might be an issue...but i think there would be an issue either way if there was a power surge. But other than that i think i should all right...i think. But id rather ask first and she what ya all say before i go killing three drives with one stone.
Also, with the SATA II data cables that have the metal latch for keeping from coming dislodged....can those work on drives that are only sata I. Well im sure they would work...but would the latch actually make the data cable from coming off easier if the drive isnt meant for it??
Any suggestions is greatly appreciated.
 

A:SATA / Molex Power and data cable hard drive question

Read other 14 answers
RELEVANCY SCORE 63.6

Computer: Dell Dimension 5100. 6 years old.
Current hard drive: SATA 250GB (think it's SATA 1). Dell web site says its ATA-133

Looking to: Replace the hard drive due to faults

Question: Can I fit a SATA 3 hard drive in this computer? Would this just work at SATA 1 speeds because of the old mainboard? Most of the hard drives listed for sale are now SATA 3.

Thanks for any replies.
 

A:Solved: SATA 3 hard drive to replace a SATA 1 hard drive?

Read other 11 answers
RELEVANCY SCORE 63.2

Hello my laptop needs to be an internal cable Hard to look for this model What is the number that exists on cable model Hp Compaq  presario cq58 d56se 

Read other answers
RELEVANCY SCORE 63.2

Just bought a HDD on amazon and I was wondering if it comes with an SATA cable. It didnt say it did, nor did it say it didnt include one. If not, where could I buy one? Walmart? Best buy?

A:Do hard drives come with an SATA cable?

It depends. Often they are oem drives - no screws or leads included.

You might need screws, sata data cable and molex - sata power cable. They are usually very cheap on Amazon, Scan, Aria, etc.

I expect they have them in Best Buy.

Read other 4 answers
RELEVANCY SCORE 61.6

ok i have a Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive and i need to the max of hard drive i can run or allow on my DEll Optiplex 740  small factor tower plus  also need help about if i can upgrade my  ADM Athlon Dual core Processor 4850e  and higher?

A:want to upgrade my hard drive Seagate Barracuda 250GB HP Model VB0250EAVER (ST3250318AS) SATA Hard Drive

Any 3.5" drive at 2T or under should work fine.  Upgrading the CPU would mean buying used - these CPUs went out of production not long after your system was current - and that was a decade ago.

Read other 1 answers
RELEVANCY SCORE 61.6

I have to replace my original hdd on my 9 year old Dell XPS 8100. The desktop  has an i7 chip so I'd hate to replace it with a new i7 PC because they are expensive.The bad drive is an esata drive. I notice that current crop of hdd's seem to be sata III drives. Will the old Dell PC mother board  on the desktop support the new sata III drivesIf I replace the bad hard drive would I be able to restore the W7 OS and all my data by using a macriumbackup file on the desktops external  backup drive?
Thanks for your help!

A:Can old oem sata hard drive be replaced with a new current generation sata III hdd on an 8 year old xps 8100 with an i7 chip??

Any 3.5" SATA drive will work.
As long as the system is in working order, and you purchase a SATA data cable for the additional drive, you should have no trouble cloning the existing drive to a new one.

Read other 2 answers
RELEVANCY SCORE 60.8

The time has come for me to wipe the hard drive and re-install Windows 7 following a recent disastrous download that's effectively knocked out my Internet Explorer 11 and rendered Internet browsing difficult. My system has since become unstable and progressively slow and unfortunately, for some reason, I am unable to Restore to any previous installation. As I have loads of files I want to access, I've decided get a new Hard Disk and run the original H/drive (if possible) from a SATA drive Docking Station. So essentially, I would like to know if my Dell DXC061 will run and support a new Seagate 1Tb SATA3 7200rpm Barracuda. My BIOS is Ver. 2.4.0 dated 05/24/07. I have opened the CPU to see that the current drive connectors appear similar to those on the SATA Docking Station and think my old drive will fit it. However, it's now occurred to me that its possible the newSATA 3 drive may not be compatible with my BIOS or Motherboard. Any help or comments please? Incidentally I have most of my most useful files backed up on an external drive, so all, hopefully is not lost.

A:Upgrading Hard Disk from SATA to SATA 3 Drive

You need a SATA3 port to connect a SATA3 HDD to be fully compatible.

Read other 6 answers
RELEVANCY SCORE 60.8

I have 2 IDE HDs installed and added SATA drive lately. SATA runs in IDE mode in CMOS. Problem is, even though SATA drive is recognized by BIOS, Disk Manager, Norton Ghost & System Works, it doesn't show in My Computer, causing problems with saving and opening files. Tried a couple of tricks (changing the drive letter,disconnecting & reconnecting the drive, reformatting etc. ) nothing seems to work. I use this SATA drive for storage and for now I have to drag the files down there manually.
I don't know if it's of any importance, but I have nVidia GeForce graphics card onboard.
Has anyone encountered this kind of a problem ?
Thanks Carl

Read other answers
RELEVANCY SCORE 60.8

I've recently had problems with two SATA drives that were not recognized by the system and the problem is both cases turned out to be a faulty SATA cable.

These have got to be some of the worst designed connectors I've seen. Two of the four I've used have failed. The connector is very fragile and will spread open or crack along the side and not make contact if they are bent or bumped when attached to the drive or MB.
 

A:Tip- SATA drive problems may be due to the cable

What manufacturer supplied the cables? I had 2 faulty IDE cables come with 2 separate motherboard companies the other day. usually when a drive is not working properly at the initial install.
 

Read other 2 answers
RELEVANCY SCORE 60.8

My old HP had a IDE drive that crashed. To put a SATA drive in, do I nedd to change the motherboard or the cables?
 

A:Can I install a SATA drive on and IDE cable

Both. If your board is not set up for SATA, you need to buy a PCI add-on card or new board.
 

Read other 1 answers
RELEVANCY SCORE 60.8

Hi all,
 
I am attempting to install Win7 in an Inspiron 1545 with a new SATA hard drive that was purchased. When i insert the drive, I get "Internal Hard Disk Drive Not Found." I have verified the drive is not showing in the BIOS, I've already attempted to reseat the drive several times. In addition, I've attempted to load the chipset drivers, SATA drivers, etc from Dells website, the drive still does not show in the OS install when booting to DVD or in bios.
I dont believe it to be an issue with the new drive, as I plugged the new drive into another model Dell laptop and it recognizes the drive fine in BIOS, also I can still boot to the previous hard drive in this laptop without issue when i plug it back in.
Is there a specific driver, etc that I need to use for the drive to be recognized or other thoughts people have?

A:Inspiron 1545- replacing hard drive, new SATA drive not found "Internal Hard Disk Drive Not Found

This is strange - either the new hard drive has a rare compatibility issue with your onboard controller (I use a 500Gbyte in my 1545 without probs)) or it is a mechanical problem.I would take a close look at the physical dimensions and compare your original hdd with the new one.Watch the video (even though it's about a 1525 (similar to an 1545) and an SSD hdd) -  go to 2:20

Read other 10 answers
RELEVANCY SCORE 59.6

I have an apparent hard disk failure and I am planning to install a new disk, but I want to insert the failed disk into a disk caddy to attempt recovery of a few items of data which were not backed up.

There is however a clip which secures one of the cables onto the drive housing, and I have not encountered this type of clip in previous drive rescues. The clip is pictured in these linked images:

https://drive.google.com/open?id=0B5EglFQB3L3oWmFzcTFuZkJyR3M
https://drive.google.com/open?id=0B5EglFQB3L3oNHlWTnVoaDlCX0E

(The clip is the small metal protrusion at the very centre of each image)

I need to know how to remove this clip, please - preferable in a way so that it can be reinserted if I am in fact able to recover the drive. Any help much appreciated!
 

Read other answers
RELEVANCY SCORE 59.6

Don't have many of the specifics of the computer with me. Generally speaking, I have an older (circa 2006), but still pretty darned capable, Gateway FX Desktop. It's running Win7 on a SATA 2. Want to buy a new drive to dual boot with Win8. In general, are the SATA 3 drives backwards compatible with a mobo supporting no more than the SATA 2 data rate, etc? I think he answer is yes, but just checking. Would I need a different cable? I doubt you can even find much in the way of new (not refurbished) SATA 2 drives these days. I have found quite a few refurbished--e.g. this one. I will need very little storage. Don't want an SSD.

A:Older Computer: SATA Drive/Cable Question

YES & NO.

Western Digital SATA III Desktop Drives are backwards compatible with SATA II Motherboards only with a jumper is set on pins 5 & 6.

You can check the JUMPER setting here:
WD Support / Installation / SATA & SAS / WD Blue / SE / SE16 (SATA II)

Read other 2 answers
RELEVANCY SCORE 59.6

Does anyone know what the cable length is when it's mounted at the very top of the case?  Is it 18 inches, 20, or neither?

Read other answers
RELEVANCY SCORE 58.8

Hi, I offered my friend a hand to solve this strange problem with his serial ata port. It seems one of the Sata wont work properly, the hard drive has windows 8.1, with uefi bios available. The point is, after switching sata ports it boots from dvd by default, can I set to boot from hdd first,
? I tried a lot of times to set boot option #1 hdd
Boot option #2 to disabled but the system still boots from dvd, the next time I enter the bios appears by default dvd drive
I went to cd dvd boot option and set It to disable the drive
Then I went to hdd and set to default the hdd
I even disconnected and booted without the drive dvd
But there is not any changes. If I insert a boot capable disc into the drive, it boots from the dvd drive.
Thanks in advance for any help.

A:Hello, gigabyte motherboard after switching Sata cable would boot from dvd drive

Is the time and date correct?
 
This could be caused by one of these.
 
A connection problem between the motherboard and the hdd.
 
A problem with the operating system, like a problem with the MBR.  But you should receive an error message like boot device not found, or hdd not recognized.
 
A problem with the hdd.

Read other 2 answers
RELEVANCY SCORE 58

Hi, I was wondering if it was possible to clone a SATA hard drive with Windows XP to a USB hard drive, and rather or not if Windows XP would work well on the USB hard drive after it was cloned from the SATA hard drive. The USB hard drive would be the only hard drive used after the SATA hard drive with Windows XP was cloned to the USB hard drive.
 

A:cloning SATA hard drive with Windows XP to USB hard drive

Read other 6 answers
RELEVANCY SCORE 58

Hi. I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one? Any help would be appreciated. Thanks in advance.

A:How do I transfer files from bad sata hard drive to new hard drive

You could make your own external HD, & than copy/paste over.
http://www.sevenforums.com/hardware-...ard-drive.html

Read other 4 answers
RELEVANCY SCORE 58

A friend of mine has asked me to transfer some music and picture files from his old IDE hard Drive in a HP Pavillion System, to his new SATA hard drive in his new Dell System, it sounds like it should be a fairly simple process, but my question is, what is the best way to just copy these files and not the entire hard disk?
 

A:Need help transferring files from IDE Hard Drive to SATA Hard Drive

Read other 6 answers
RELEVANCY SCORE 56.8

Hello, my computer had locked up not to long ago so I had to give it a hard reboot. However, now it doesn't seem to recognize my main hard drive. I have 2 sata hard drives plugged in and it only recognizes my other one. If i set the option for "Configure SATA as" to RAID in bios, it shows it in the boot list but then throws a BSOD with error code 0x0000007b. Also it seems the same BSOD error happens when I set it as AHCI. Both hard drives recognized but BSOD thrown.When it has "Configure SATA as" IDE it only shows the other hard drive. Any ideas?

My System is:

ASUS P5E LGA 775 Intel X38 ATX
Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775
CORSAIR XMS2 DHX 4GB (2 x 2GB) 240-Pin DDR2 SDRAM
Seagate Barracuda 7200.11 ST31000340AS 1TB 7200 RPM SATA 3.0Gb/s Hard Drive
 

Read other answers
RELEVANCY SCORE 56

Tried yesterday with an SATA adapter (unpowered) and my Yoga 920 would ding that something was plugged in, but wouldn't show it in File Explorer.Traded the unpowered drive for a powered one and the same result, a ding but nothing shows up. Is there something else that I can do? Thanks in advance

A:Can I remove the hard drive from my Yoga 2 Pro and plug it into an SATA drive and transfer the data?

I am confused.  You are talking about an mSATA -> USB adapter?  mSATA-> 2280 SSD?  What is a powered mSATA adapter?

Read other 1 answers
RELEVANCY SCORE 55.6

Can anybody talk me through installing a slave drive on my gateway gm5483e motherboard model 945gct-m3 made by elitegroup also known as ECS
 

A:windows Vista sata hard drive slave drive

plvness,

It should be as simple as installing a couple of cables. Hopefully you've got a nice flat cable either with the new slave drive, or a spare with the motherboard: it's normally red, but can be other colours, about 1cm wide and 1mm thick. That needs to be plugged in between the drive and one of your SATA slots on the motherboard. They'll normally be black, and unlike most, will have a slight 'L' shape to them. If you get a torch on your motherboard, you should see SATA1 or SATA2 written very close to them. If you've already got a SATA drive, then it should be easy to spot, so just use the second port.

When you start the machine up, go into the BIOS by pressing the appropriate key (it should come up with a screen just after displaying what graphics card you have / testing memory, telling you what key to press - normally F1, F2, F12, Esc or Del),

Then find your way to the 'Boot Order' section (sorry, not sure quite where it'll be for your chipset - but it'll be either on the first screen, or more likely a menu off of it), and make sure that it's still on your CD/Floppy/original drive first and hasn't swapped to your new SATA (it shouldn't have done, but some prefer a SATA drive by default to an IDE).

Any probs or questions, please come back. You'll do fine!

Rich.
 

Read other 2 answers
RELEVANCY SCORE 55.6

I bought myself a SATA caddy to replace the optical drive on my Lenovo Z51-70, with a 2.5" SATA Drive.The caddy and the hard drive work, as tested on another HP Laptop.But on my Z51-70, the Hard drive is not detected, either in BIOS, or within Windows itself. I checked the Device Manager and Disk Management, but it is not visible anywhere like it is on my HP Laptop. Any and all help and suggestions will be appreciated!I desperately need this to work!Please Help! 

A:Z51-70 2nd Hard Drive via SATA Caddy to replace Optical Drive.

Lenovo released a new bios update! Did you try it?

Read other 1 answers
RELEVANCY SCORE 55.6

Dell Dimension 8400 (about 3-4 years old). Stock SATA 160gb hard drive crashed (got the blue screen, all the codes, etc.) Took it to a computer place, they also said the HD crashed. I have bought a replacement 250gb SATA HD - attached the two inputs to the back (one thin and ling, one thin and short) and all I get on boot up is a couple of chirps and the screen says "Drive 1 (and 2 and 3) Not Found: Serial ATA, SATA-1" and repeats for drives two and three. The drive is warm, it's being accessed (it's humming), but I've also tried a third 160gb drive, same thing. I even replaced the original drive back in and the same thing - not even the blue screen and error codes any more.

Went to F2 set up, set to auto detect, all (SATA) drives sets to 'on.'

I'm computer literate, but not a techy or anything.

Totally lost now. Please help.

emsguy4you at aol dot com
 

Read other answers
RELEVANCY SCORE 55.6

I have a Dell Vostro 200. It has a hatachi 80 GB harddrive. It has no OS installed. I want to switch it with a 1TB hard Drive. 1st does it matter who the manufacter is? Dell wants WD. I want Seagate. And do I just load the XP Pro disc in and start? Oh, I don't believe it has ever been used. It was supposed to be a vista...yuck!
 

A:Is it hard to just replace a SATA hard drive?

ynotbme said:





1st does it matter who the manufacter is? Dell wants WD. I want Seagate.Click to expand...

Brand names are irrelevant especially when you are installing your own OS.




ynotbme said:





And do I just load the XP Pro disc in and start?Click to expand...

That would be the idea if you have it set to boot from disk in the system BIOS. The CD/DVD must have first priority over the HDD to boot.
 

Read other 2 answers
RELEVANCY SCORE 55.2

Hi, Is this possible? I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.

I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in. I'm pulling my hair out here!!!

My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have win7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)

Help!!

A:Install Windows 7 with Sata Hard Drive and IDE DVD ROM Drive

Have you checked out all of our Questions list ?


Questions to use for help with Installation Issues


One of my favorite tips is to pre-format the HD on another computer to the partitions that you want for the new install on the new computer. Sometimes SATA drivers are required during install either from Disc or USB flash drive containing the correct Sata drivers needed.
Also check your Bios setting for AHCI, SATA, IDE.

Read other 9 answers
RELEVANCY SCORE 55.2

Hi Everyone,

I just bought a 1.5TB Seagate SATA HDD Which I will be using as a data drive. I have my Primary 320gig sata hd which i use for windows. Now when I go to install the 1.5tb Drive, it detects it on first boot in the bios. when it trys to boot, it hangs on a black screen and doesnt move. When I go to restart, the 320 Primary Drive dissapears and only the 1.5tb drive is visable.

So what I've tryed to do is ive disconnected the 1.5tb drive, i left the 320 drive connected and it booted up fine. got into windows and worked as normal. but when I plugged in the 2nd drive it doesnt boot up. and when it doesnt boot, you restart and the 320 dissapears. I've also ghosted my 320gig drive to the 1.5tb drive. My 320 contained 2 partitions (C: for windows and D: for data) So atm im using my 1.5tb drive like my 320 with the C and D. But would anyone know the issue why I cant have both drives in there.?

Here are the troubleshooting steps I took

1) Changed SATA Cables
2) Changed the sata order (Plugged primary in SATA 2 and DATA HD in SATA 3 to see if the ports are faulty
3)Took out the IDE CD-ROM
4) Tryed to mess around in the bios and nothing worked.

Also using an ASUS P5ND mobo with lastest bios update.

A:Hard Drive Dissapears after installing 2nd SATA Drive

What is the power supply like? Make sure the power cables are on a different branch, if possible.

Perhaps the PSU isn't sending out enough power for both drive on a single cable?

Just a guess.

Read other 9 answers
RELEVANCY SCORE 55.2

I have a Dell Dimension MCE 8400 that I ordered with a single drive. In retrospect I should have ordered it with 2 drives and without MCE but that is another discussion. I am wanting to install a new OEM WD Cavier SATA 160 with dual boot operating systems on the same drive but partitioned, XP Pro and MCE. I have installed the WD drive as the second drive (in position 1) and made a partition of 40 GB. The drive is seen by the system. I reboot the system and go into setup, disable the Maxtor SATA drive (one delivered with system and in position 0) change the boot order so it boots from CD, save the changes. I boot the system with the Win XP Pro CD, and in the FDD I have WD SATA drivers. The system boots, I hit F6 and it looks as though it is reading the SATA controller drivers. Needless to say the system doesn't recognize that a hard drive is present. Please help!!!!! If anyone has any ideas or suggestions it would be greatly appreciated.
 

Read other answers
RELEVANCY SCORE 55.2

I have set the dvd and hard drive to cable select. I was planning on connecting the black one(master) to the dvd and the grey one(slave) to the hard drive and the blue one to the board. Can I do that? or the hard drive has to be master?

thanks
 

A:can you connect a dvd drive and one hard drive on one ribbon cable?

You can do that if you want . I generally prefer the HD to be master but the gain in performance is pretty much insignificant .
 

Read other 1 answers
RELEVANCY SCORE 55.2

So i found an old sata hardrive that was stored for about 2 years.
While the computer was on, i tried to plugged the Hardrive in the SATA power connector cable, as soon as i plugged it in the power connector there was smoke coming from the connection and my computer immediately shutdown.

Can someone explain what happened? I though you could connect devices while the computer was on without any issues?

Read other answers
RELEVANCY SCORE 54.4

hi
I'm a bit desperate here. I have a Sata Seagate barracuda 7200 320 Gb hard drive that wont work. it appears to try to start but it starts making a weird sound, almost like a car when its trying to start but can't. I was recommended to get a SATA to USB wire and tried it, but no luck. it tries to start for a while then stops all together. windows said a USB device malfunctioned. any ideas the drive isn't that old so i didn't back it up & there is a lot of data that I would hate to lose, some I don't even remember that may be important. any help will be appreciated. Thanks in advance!
 

A:Sata hard drive gone bad

You need a professional data recovery service (expensive) or an identical drive and mechanical ability:

http://www.overclockers.com/tips1035/
http://free-backup.info/do-it-yourself-diagnostic-tips-for-hard-drive-recovery.html
http://repair4harddisk.org/disassembly_hard_drive.html
 

Read other 1 answers
RELEVANCY SCORE 54.4

Ok i just installed an SATA Hard Drive, but when i look at device manager it shows it as an ATA Hard Drive? I am running Vista Ultamite and yes i have downloaded the SATA Driver for my motherboard and istalled it but is there some setting i need to change to make my pc see it as an SATA or is the device manager just wrong Any help would be apreaciated
 

A:SATA Hard Drive

A SATA is an ATA drive--it just happens to be a serial one.
 

Read other 3 answers
RELEVANCY SCORE 54.4

hi folks
my hp pavillion dv2058ea came new with a western digital 120gb sata hard drive. i've decided to up grade to a western digital sata 250gb drive. i have updated to the latest bios on th laptop and i have created a floppy with the latest sata drivers from hp. when i tried to use the hp recovery discs they would not recognise any hard drive. bios does not show any hard drive either and when i put the old hard drive back it all works fine though bios only shows it in boot optios as 'notebook hard drive'. thinking that the recovery discs only work with the original hard disc i have purchased a windows xp with sp3 disc. set up proceeds and using the f6 option i instal the sata drivers and set up continues to the end. then when i click enter to instal windows the screen tells me no hard drive is found press f3 to exit setup. thinking i may have a faulty hard drive i tried it with a new hitachi travelstar sata drive but got the same results.
where am i going wrong folks?
all answers appreciated.
 

A:Xp not seeing my new sata hard drive

Read other 6 answers
RELEVANCY SCORE 54.4

I just recently aquired a Sata Hard drive off ebay used. First time ever messing with SATA at all and I am a little purplexed on how to hook it up to my computer.

It is a Wester Digital Caviar SE16 500 GB with model number WD5000AAKS-00TMA0 . It came with the Sieral Data Cable. http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1409

According to my mother board manual it supports

"- Supports two native SATA 1.5Gb/s devices
- Hot-swap capability, allowing disks to be changed without powering down the system.
- Supports SATA ATAPI devices "

My first question is what all is needed to hook it up to my computer?

Secondly my second question revolves around jumper settings. On the jumper settings there is a setting to bump the hard drive down to 150meg/s. Would this be needed since I have an older style SATA? I am a little confused on the rest of the jumper settings that are available for it. If someone would be willing to explain them to me I would be most grateful.

Thirdly I noticed when I installed my mother board driver that installed a Raid Controler on my computer and was wondering how that would impact my SATA hard drive and what exactly is raid? Thank you for your time in reading and responding to my question.
 

A:Sata Hard Drive Help

Read other 7 answers
RELEVANCY SCORE 54.4

Hello peeps, im new to the forum so bare with me.

Ive got a computer which has windows XP. It has a SATA hard drive.
It wont switch on. Ive taken it apart and ive come to a conclution that it will only switch on if the hard drive power is unplugged. There is a light on the motherboard which when the hard drive isnt plugged in it is red. I turn the computer on and the bios loads up, but as i plug in the SATA ( Plug and Play) harddrive the computer just shuts down. Ive tried two different power supplys so its not that. Please help because this is really annoying.

Thanks

Tyler

A:Sata Hard Drive Help!!!

Hi Tyler and welcome to TSF

Did the SATA drive just fail, or has it been bad all along? It sounds like a short in the power supply connection at the Hard Drive. Check the pins on the HD's power input plug. You may have a bent one. If you have access to another SATA drive, try it.
Try unplugging all other devices on the PC (printer, usb devices, etc) to help unload the power supply and see if that makes a difference.
My SATA drive has a small flat plug for the power supply input. It looks like it could be plugged in upside down with very little force. Make sure your's is plugged in properly.

Hope this helps
Mack1

Read other 4 answers