Over 1 million tech questions and answers.

Headpone/ main speaker problem & BSODs

Q: Headpone/ main speaker problem & BSODs

My problem is that recently my headphones and pc speakers arent qorking properly. normally when the headphones arent plugged in the speakers should play sound and when the headphones are plugged in, the speakers mute and sound goes to the headphones.

well now its one or the other. when i boot, if the headphones are in, sound only comes to them and when they are unplugged there is nothing. same for the speakers at boot. the "playback devices" menu recognizes when the headphones are plugged in but sound still streams to speakers unless it is booted with them plugged in.

more info. a while ago i uninstalled realtek and used the computer without it for about 6 months fine. then i realized it was still hiding on the computer and tried to re-install it. it worked until i started getting BSOD's with an AVG update. now realtek is hidden with no way to access it though it's drivers are still used in adobe audition and the speaker icon says im using the stock 'high definition audio device'. i feel like this has something to do with this.

any suggestions?

RELEVANCY SCORE 200
Preferred Solution: Headpone/ main speaker problem & BSODs

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Headpone/ main speaker problem & BSODs

Update your Realtek audio drivers - http://218.210.127.131/downloads/

Go into Windows Control Panel, Realtek Control panel and change settings.

Remove AVG - http://jcgriff2.com/A-V_Removal_Tools/AVG_Removal.html

Reboot upon completion.

Install MSE - http://www.microsoft.com/Security_Essentials/

Regards. . .

jcgriff2

`

Read other 3 answers
RELEVANCY SCORE 58.4

Everything with my sound was fine and then i left my computer running and it log out because I didn't do anything on there in a while...when i signed back into windows and tried to play somethin the sound would only come from one speaker, the speaker that controlled the volume had no sound. I looked in the volume control everything seemed to be fine. I tested the speakers and the main one still had no sound. Can somebody tell me whats wrong or what i can do.
 

A:Main Speaker has no sound

ok first tell me the model no. of the speakers and who makes them ill do some research and figure out the problem
 

Read other 1 answers
RELEVANCY SCORE 57.6

Hope I'm in the right place.I want to find out if I can switch from Headphones to Main Speakers, or Back without having to keep going into Volume Control Options and resetting the Default (what a Hassle)??I just purchased Logitech G390 Headphone/Microphone for Using with Skype and My Online Games. I have a Gigabyte MoBo w/High Definition Audio, Main Speakers are the Logitech Z5500.And on a Rare Occasion it would help if I could Have the Headphones On with the Main Speakers On too. The Case has a Audio Control, However it only works with a Pin-Type Jack for Headphone,This G390 uses PnP USB 2.0.Can someone steer me down the right path if there is such a thing?

A:Headphone or Main Speaker Control

Switch Headset to Speakers QuicklyDoes this help?If not, try the guide here.

Read other 3 answers
RELEVANCY SCORE 56.4

First of all, the problem occurred after upgrading to Win10. What I noticed first was that strange looking audio driver(FIRST PICTURE BELOW). I have tried uninstalling and reinstalling the driver but it only dissapeared and appeared looking the same. Another thing I have noticed was that I don't see the Beats audio icon to adjust some settings. I did installed it and maybe I heard a slight difference. But the sound was low. I tried solutions I could find here(HP forums) that were related to my problem. But none of them fixed my problem, only installed the Beats audio drivers(which is good). After opening device manager I saw this(I opened it after all the installations I made)The properties of High Definition Augio Device It would be great if someone of the experts here could help me out. Or maybe some customers have encountered similar problem and fixed it. 

A:Cannot hear sound from the main speaker(Beats audio)

Hi: The High Definition Audio device is the Intel HDMI audio device that needs a driver installed.  It has nothing to do with the Beats Audio not working. Here's what I recommend you do to install the Intel HD audio device with the ! mark. Download and install this free file utility.  The 2nd file on the top of the page is for 64 bit. http://www.7-zip.org/ After you install 7-Zip, download and save, but do not run the Intel graphics driver on your notebook's support page. This package provides the driver that enables the Intel High-Definition (HD) Graphics in supported notebook models that are running a supported operating system. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. http://ftp.hp.com/pub/softpaq/sp72001-72500/sp72370.exe Right click on the sp72370 driver file you saved. Select 7-Zip from the list of items on the menu. Have 7-Zip Extract to:  and let it extract the file into its folder name (sp72370). Once 7-Zip has created the driver folder, go to the device manager and click on the problem HD audio device. Click on the driver tab.  Click on Update Driver.  Select the Browse my computer for driver software option, and browse to the driver folder 7-zip created.  Make sure the Include Subfolders box is checked, and the driver should install.  Then restart the PC. The only suggestion I can... Read more

Read other 1 answers
RELEVANCY SCORE 50.8

I have tried all I could possibly do and I cannot come up with an answer, I have a Soundblaster Audigy LS soundcard, and Midiland MX-5 Speakers,these speakers need no drivers, and I have the newest drivers for the Audigy LS soundcard, I have gone through the programs and done so much that I could, I tried the cmss option and my subwoofer just never works. They are properly plugged in according to the instructions that came with the soundcard, I am running out of things to do and I've come here as a last resort, hoping i've given enough information for someone to help, if you need any additional information just let me know and I will do my best to help

Thank you for your time
 

A:Soundblaster Audigy LS Speaker Problem (Subwoofer/Center Speaker)

1st thing have u gone to the windows sound panel,

control panel ; sound and audio devices problem ; under volume tab speaker settings Advance ; check the speaker setup.

might b default setup is set to sumthing else.

Other do you have THX console, if so u tried playing around with that and the other extras thown in with the card.

or u just have a messed sub box, which i highly doubt,
 

Read other 2 answers
RELEVANCY SCORE 42.4

I am having an issue with my main pc, computer 1 in my signature, not turning on or shutting itself down. It all started last week, I left the pc on and went to work, then a couple days later went to get on the pc and it was off. I have to try several times at turning it on before I finally get a post beep, I have unplugged the dvd drive, took out the video card, (that was my problem last time) and I even took out the ram and reseated it but I still can't get it to post beep the way it should. When I finally do get it to turn on it loads everything just fine then shuts itself down unexpectedly. I have a new power supply bought earlier this year and I am also on my 3rd video card since building this system. I was thinking maybe that the stuff between the processor and cooler could be old and not working, there by forcing the shutdown, any thoughts would be appreciated.
 

A:Problem with main pc

Read other 16 answers
RELEVANCY SCORE 42.4

Hi all
So far I,ve enjoyed using W7 X-64 but there's one application that consistently (and randomly) fails for what I can see is no apparent reason.

The message IE8 has unexpectedly stopped working.
You then restart IE8 and it will sometimes but not always restore your last session.

I use almost NO plugins apart from the adobe flash - this installs on the 32 bit version of IE8 but not the 64 bit version.

(You can tell if flash is working / installed or not) by simply loading the BBC's home page (BBC - Homepage) and seeing if there is a little square analog clock application running at the right hand top of the screen - this won't appear if you start the 64 bit version of IE8).

I "tolerated" the occasional failure of the pre-RTM versions of W7 but I would have expected it to be fixed in the RTM.

Handling badly written / dubious code from zillions of websites can be tough on a browser but IMO the browser should be robust enough to just ignore or issue a message when it has problems accessing a particular site.

So W7 X-64 RTM in general very positive but not too happy with some aspects of IE8.

(Firefox hasn't yet crashed on my system - but for work compatability I'm often forced to use IE8 ----- so don't reply "why not use another browser please ).

Cheers
jimbo

A:IE8 - my main problem with W7 X-64 RTM

Here's something you can do:
1: Open Internet Options and go to and uncheck Enable Protected Mode.
2: Under Advanced tab, uncheck Enable 3rd party browser extension.

Clear all cookies and temp and then restart your pc.

Read other 2 answers
RELEVANCY SCORE 42

my main board wont load when powered. when i apply power, the keyboard lights, and the CPU/sink fan starts, but the monitor does not reflect any activity. i pused the num lock key, to see if that would work, but it didn't respond.

the board is a "PC100 Systemboard, Slot 1/socket 370". the processoer is a pentium celeron.

so far, i have:

changed memory, changed CPU, checked and confirmed jumper settings, replaced the bios battery, replaced the BIOS chip itself, swaped power supplies, striped periphials, and even changed the system speaker to see if there was an "error beep" i was missing.

the results:
nothing.

the VGA "card" is onboard, with a ribbon cable "dongle"

i think that somthing is bad in the electronics of the board itself.

the system was functional before, then i put it aside, while i worked with another machine. now it just "doesn't work".

if anyone has sugguestions (can't spell that word), or knows how to check the board itself, let me know.

my email is:

[email protected]

my AIM handle is:

LNBLD

thanks,

Nick
 

A:main board problem

strainge that you dont get any beep code , not even the single beep . i assume that you have tried another monitor .
 

Read other 2 answers
RELEVANCY SCORE 42

hello!!I have DAP , and it automatically tries to download this "http://t34rulit.com/main.exe" everytime i open any type of window (IE, windows explorer, my computer...)searched the web, found your site to be very informative, got the hijackthis.exe v1.98.2... here's the log...Logfile of HijackThis v1.98.2Scan saved at 12:30:07 PM, on 05/12/2004Platform: Windows 98 SE (Win9x 4.10.2222A)MSIE: Internet Explorer v6.00 (6.00.2600.0000)Running processes:C:\WINDOWS\SYSTEM\KERNEL32.DLLC:\WINDOWS\SYSTEM\MSGSRV32.EXEC:\WINDOWS\SYSTEM\MPREXE.EXEC:\WINDOWS\SYSTEM\mmtask.tskC:\WINDOWS\SYSTEM\MSTASK.EXEC:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\CCEVTMGR.EXEC:\PROGRAM FILES\COMMON FILES\SYSTEM\MOSEARCH\BIN\MOSEARCH.EXEC:\PROGRAM FILES\COMMON FILES\MICROSOFT SHARED\VS7DEBUG\MDM.EXEC:\PROGRAM FILES\NOVAPORTAL.COM\NOVAPORTAL SINGLE USER\NPSU.EXEC:\WINDOWS\SYSTEM\RPCSS.EXEC:\WINDOWS\SYSTEM\PSTORES.EXEC:\WINDOWS\SYSTEM\TAPISRV.EXEC:\WINDOWS\EXPLORER.EXEC:\WINDOWS\TASKMON.EXEC:\WINDOWS\SYSTEM\SYSTRAY.EXEC:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\CCAPP.EXEC:\PROGRAM FILES\DAP\DAP.EXEC:\PROGRAM FILES\WINAMP\WINAMPA.EXEC:\WINDOWS\ptsnoop.exeC:\PROGRAM FILES\COM... Read more

A:need help for "t34rulit.com/main.exe" problem

First, click here to download Javacool's RapidBlaster killer. Launch the program and hit the Scan button. RBKiller will find any RapidBlaster variants on your system, kill the process, delete the Registry Run entry, and remove the file itself. Reboot when done.Click here to download Spybot Search & Destroy - install, update, scan and fix all RED items it finds. Reboot when done. Click here to download Ad-Aware SE and install. Before scanning click on "check for updates now" to make sure you have the latest reference file. Click "Start", select "Perform Full System scan" and "Next" to start the scan. When the scan is finished, the screen will tell you if anything has been found, click "Next". The bad files will be listed, right click the pane and click "Select all objects" - this will put a check mark in the box at the side, click "Next" again and click "OK" at the prompt "# objects will be removed. Continue?".Reboot when done. Rescan with HJT and post a new log here so that any remnants can be removed manually.

Read other 6 answers
RELEVANCY SCORE 42

Yes i've been getting this problem when I start my computer up, I have getright as my downloader and the second it starts, another download box pops up to download a file called main from t34rulit.com. it only does it once every start up and I am on 56k so im not instantly connected.heres a Hijack this log file.Logfile of HijackThis v1.98.2Scan saved at 12:00:14 PM, on 12/4/2004Platform: Windows XP SP1 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Common Files\Symantec Shared\ccSetMgr.exeC:\Program Files\Common Files\Symantec Shared\SNDSrvc.exeC:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exeC:\WINDOWS\system32\LEXBCES.EXEC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\system32\LEXPPS.EXEC:\WINDOWS\Explorer.EXEC:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exeC:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exeC:\Program Files\Common Files\Symantec Shared\ccProxy.exeC:\Program Files\Norton Internet Security\Norton AntiVirus\navapsvc.exeC:\WINDOWS\System32\nvsvc32.... Read more

A:T34rulit.com Main problem?

I want you to fix some of those entries. Please do the following:Please make sure that you can view all hidden files. Instructions on how to do this can be found here:How to see hidden files in WindowsRun Hijackthis again, click scan, and Put a checkmark next to each of these. Then close all other windows--you should only see HijackThis on your Desktop--and click the Fix Checked button.O4 - HKLM\..\Run: [FX] C:\WINDOWS\Downloaded Program Files\ieloader.exeO16 - DPF: {39B0684F-D7BF-4743-B050-FDC3F48F7E3B} (FilePlanet Download Control Class) - http://www.fileplanet.com/fpdlmgr/cabs/FPDC_1_0_0_44.cabO16 - DPF: {88D969C0-F192-11D4-A65F-0040963251E5} (XML DOM Document 4.0) - file://C:\TempEI4\EI40_\msxml4.cabO16 - DPF: {99802379-7362-40E2-9D28-8A3B9AF880B7} - http://hotsearchbar.com/toolbar2/winhot32.cabReboot your computer into Safe ModeThen delete these files or directories (Do not be concerned if they do not exist)C:\WINDOWS\Downloaded Program Files\ieloader.exeC:\TempEI4\EI40_\msxml4.cab<=Delete TempEI4 FolderReboot your computer to go back to normal mode and post a new log.

Read other 5 answers
RELEVANCY SCORE 41.2

Basically the problem is, that the Main Menu keeps appearing then disappearing ON ITS OWN. I don't even press a button and it shows up then goes away, then shows up, repeatly, for the longest times it keeps doing this. It gets the worst on weekends.

Anyways it's super annoying and right about now I wanna break my monitor.

I am using a Hp computer, its kinda new or whatever. The monitor itself is a hp pavilion f1703.

its doin it as i'm typing this......

help me

A:Monitor Main Menu Problem

Check and make sure the connections on your mouse and keyboard are secure.

If you are using USB connections for them, try PS2 instead, in fact, if you can borrow a mouse and keyboard from another computer try them, again, preferably not USB connected.

If they are wireless, change the batteries (yes, they do indeed have batteries).

Read other 3 answers
RELEVANCY SCORE 40.8

I recently discovered a difference in the volume; the left speaker of the laptop has been functioning normally while there seems to be very low to no sound coming from the right speaker.

Any suggestions?

A:Dell Inspiron 15 5559 Audio - Right Speaker has low volume while the left speaker functions normally

Hello.You didn't mention the headphone jack, so if you have not yet done so, plug in headphones and see if the balance is okay in them. If the headphones check out okay, then most probably it's a problem related to the speakers.
The test for speakers is the ePSA audio test. It is a hardware test, which means that if the test  tones are very low in the right speaker, but normal in the left speaker, then there is hardware failure somewhere, related to the right speaker.
If both speakers sound normal during the test, then the problem is in the software. Do the usual things like re-install the audio driver, check the balance levels in the Sound properties, try different audio sources, etc.
Re-installing the audio driver resets the settings to their default configurations, so if you do it then you don't have to bother with things like volumes and balance settings, because they will be okay.(Also if the balance is okay through headphones, then it should be okay through the speakers too.)
Here is how to do a simple driver re-install:
1.    Open the Device Manager.2.    Expand the "Sound, video & game controllers" category.3.    Right click on "Realtek High Definition Audio".4.    Click "uninstall".5.    Do not check the box to “delete the driver software for this device”. 6.    Restart the computer. Windows will detect your device a... Read more

Read other 1 answers
RELEVANCY SCORE 40.8

ComboFix 10-06-07.03 - mungo_test1 06/07/2010 22:29:31.1.2 - x86Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.1014.469 [GMT -4:00]Running from: c:\documents and settings\mungo_test1\Desktop\ComboFix.exeAV: Symantec AntiVirus Corporate Edition *On-access scanning enabled* (Updated) {FB06448E-52B8-493A-90F3-E43226D3305C}.((((((((((((((((((((((((((((((((((((((( Other Deletions ))))))))))))))))))))))))))))))))))))))))))))))))).c:\documents and settings\ebergofsky\Local Settings\Application Data\syssvc.exe.((((((((((((((((((((((((( Files Created from 2010-05-08 to 2010-06-08 ))))))))))))))))))))))))))))))).2010-06-07 21:52 . 2010-06-07 21:52 -------- d-----w- c:\documents and settings\ebergofsky\Application Data\Malwarebytes2010-06-07 21:29 . 2010-06-07 21:29 -------- d-----w- c:\documents and settings\mungo_test1\Application Data\Malwarebytes2010-06-07 21:29 . 2010-04-29 19:39 38224 ----a-w- c:\windows\system32\drivers\mbamswissarmy.sys2010-06-07 21:29 . 2010-06-07 21:29 -------- d-----w- c:\program files\Malwarebytes' Anti-Malware2010-06-07 21:29 . 2010-06-07 21:29 -------- d-----w- c:\documents and settings\All Users\Application Data\Malwarebytes2010-06-07 21:29 . 2010-04-29 19:39 20952 ----a-w- c:\windows\system32\drivers\mbam.sys2010-06-07 05:43 . 2010-06-07 05:43 -------- d-----w- c:\documen... Read more

A:combofix log with AV Security suite the main problem

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers
RELEVANCY SCORE 40.8

I've been having problem the past 2 weeks with BSOD. I've run Prime95 for like 2h, no BSOD and the temp is around 75C, I've done some chkdsk on all of my drives. Have one SSD and four HDDs.
I've also run memtest86. First time I got one errr after pass 1 finished and started with pass 2. The test had run for like 2hrs. Then I pulled out one of the RAM(the one closest to the HDD cage), ran the test again for 2,5 passes(2-3hrs), no errors. Ran the RAM I pulled out, same length, no errors. Put the other three back in and ran the test over night for 8hrs, no errors.(??) I think it was around 5-7 passes. Under computer properties it was Installed RAM: 16GB (15,9GB usable)

But I still had problems. Reinstalled Windows 7 Enterprise, installed all the Windows updates and the drivers from Gigabytes webpage, this time without the EasyTune etc.
I also have simple programs like: uTorrent, Minecraft Server, Mumble Server, Wampserver, Plex Media Server and Filezilla Server on it. So no random programs etc.
Still got problems. I've tried to reset BIOS, didn't help. I have changed from IDE to AHCI in the BIOS(cause I have SSD). When I come home today I will try to pull out two RAM and see what happens, if that doesn't help, I will try to run with the two I pull out. I will also try to disconnect the HDDs and only have the SSD plugged in.
I will try to update BIOS too. If none works I will reinstall Windows again and dont install ANYTHING and see what happens. Any ideas? I... Read more

A:BSOD -ntoskrnl.exe main problem file

Here comes my dumps: https://dl.dropboxusercontent.com/u/...6_17283367.rar
(Download link don't work for some reason. Check the atteched files further down the thread.)

Does it matter that I use my computer via Remote Access from my main computer? That shouldn't be an issue.

Got a BSOD now when I got home.
This time is was the files: ntoskrnl.exe, tcpip.sys and win32k.sys.

Took out 2 of 4 RAM slots and will see if it BSODs anything. The RAMS are at 1600mhz atm. Shall I change back to 1333mhz?
Under Computer Properties it says: Installed RAM: 8GB (7.88GB usable)

I also use Classic theme on the dekstop. Not the Areo.

EDIT: My Samsung 840 EV 120GB SSD have the latest firmware and the chkdsk didn't show any problems what I could see and Samsung Magician showed that the disk is healthy so I don't think is the SSD anyway.

Atm I'm running with 2x4GB RAM and trying to see if the system is stable. If not, I will try the other two sticks in the meantime you guys look at the dump files.

While the system is running I checked the Event Viewer in Windows under Custom Views->Administrative Events and found these Errors:
Unloading the performance counter strings for service WmiApRpl (WmiApRpl) failed. The first DWORD in the Data section contains the error code.

The performance strings in the Performance registry value is corrupted when process Performance extension counter provider. The BaseIndex value from the Performance registry is the first DWORD in the Data section, LastCount... Read more

Read other 9 answers
RELEVANCY SCORE 40.8

Hi, I have been experiencing major slowdowns and have run all necessary programs and I have Smart Security ESET/NOD32, and used all anti-spyware programs recommended. I myself looking at the log from previous experiences see some things that may be spyware, please help in confirming and making my decision. Here is my HJT log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:46:25 PM, on 10/04/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16640)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
c:\program files\common files\logishrd\lvmvfm\LVPrcSrv.exe
C:\WINDOWS\arservice.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\mscorsvw.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\dllhost.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\ehome\ehtray.exe
C:\WINDOWS\RTHDCPL.EXE
C:\WINDOWS\ARPWRMSG.EXE
C:\WINDOWS\System32\svchost.exe
C:\Program Files\HP DigitalMedia Archive\DMAScheduler.exe
C:\WINDOWS\eHome\ehmsas.exe
C:\Program Files\HP\HP Software Update\HPwuSchd2.exe
C:\WINDOW... Read more

A:Unsure of Main Problem, Am Positive that I have various Problems

Bump Please

Read other 1 answers
RELEVANCY SCORE 40.8

Hi

On my outlook express 6 the outlook express main folder hasn't changed for ages. It's still saying that there are two undread messages from ages ago! I am recieving emails ok, I can just go straight into my 'inbox' folder but does anybody know how to stop this from happening?

Let me know, it would be appreciated

Jon
 

A:Outlook Express 6 main page problem

Jon
Here is an article from the newsgroups that tell you how to adjuct the message count for XP.
"Doug Knox MS-MVP" <[email protected] wrote in message
news: [email protected]..
To reset the message count, click Start, Run and enter REGEDIT

Navigate to:

HKEY CURRENT USER\Software\Microsoft\Windows\CurrentVersion\UnreadMail

Look in the subkey for each e-mail account. The value you're looking is MessageCount

Double clickthe MessageCount entry and set the value to 0.

To disable this option completely visit my web site,
www. dougknox. com and go to the Win XP Fixes section. Follow the link for Disable/Enable Unread Message Count

--
"Do not Panic! Your password is correct. It just looks wrong!" - MS-MVP
KellyClick to expand...

Link to article Here

Let us know if that helps or if you need help in using regedit.

Dave
 

Read other 1 answers
RELEVANCY SCORE 40.8

Sorry if this gets long, I want to make sure I explain the problem sufficiently. I am trying to hook up my LG LCD HDTV to my husband's Toshiba Satellite via HDMI. I right-clicked on the desktop and went into "Graphics Propreties...". At first, I did a desktop clone, which worked out great, but I wasn't satisfied with the resolution. I figured it had something to do with the max resolution available on the notebook, since what displayed on the TV was just a clone of the notebook's display. I then switched to single display, with the HDTV as the display. That worked, andI was able to up the resolution past what was available before. Here is where the problem starts: I was switching back and forth with a few different resolutions, and happened to pick one that apparantly my HDTV does not like, as the screen went black and "Invalid Format" danced around the screen. As soon as I unplugged the TV from the notebook, it switched back to the notebook's display. Here is my question: I need to know how to either fix the resolution issue with the TV without it being plugged into the notebook, or I need to know how to reset the graphics settings so that it does not remember that I ever hooked it up to the TV in the first place, at which point I can start from scratch and not mess around with the resolution to begin with.
 

A:Solved: Problem with using HDTV as main display

Hi Skinygrl99, and welcome to TSG.

Found this in the PDF version of the A500 Series User Guide:
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
Some modes are only available with the appropriate device attached
and turned on.
The quickest way to change the display output settings is to use the
display hot key (Fn + F5):
1 Press Fn and F5 simultaneously.
2 While holding down Fn, press F5 repeatedly until the setting
you want takes effect. Briefly pause each time you press the F5
key to allow time for the display to change.
This hot key cycles through the settings in the following order:
&#10070; Built-in display only
&#10070; Built-in display and external monitor simultaneously
&#10070; External monitor only
&#10070; TV (or other external video device) only
&#10070; Built-in display and TV (or other external video device)
simultaneously
&#10070; Built-in display and external monitor (extended desktop)
&#10070; Built-in display and TV (extended desktop)
&#10070; Swap&#8212;Switch primary display between internal display
and external monitor when using extended desktop
Click to expand...

That should let you get back to using the control panel to select a suitable mode for the exteranl screen.
 

Read other 3 answers
RELEVANCY SCORE 40.8

I cannot get the MC7354 on the Thinkpad T520 to work. It is constantly complaining that the Hardware switch is off when this laptop does not have a WWAN hardware switch. I also have a MC7700 that is doing the exact same thing.  I can't get either of these cards to work simply cause I can't get them to actually turn on in windows. 













Solved!

Go to Solution.

A:MC7354 on T520 [Main Problem Solved, No LTE however]

I believe the slide switch at the front left controls both the WiFi and WWAN radios

Read other 9 answers
RELEVANCY SCORE 40.8

EDIT Moved from Am I Infected to XP. As requested in post 22 ~~boopmeMy computer runs XP - Home.Last night I was prompted to update Media Player to version 8. I was afraid to do so, because many "updates" from MS mess up my computer. However, I loaded the update. I noticed the new icons in the tray and on the Start Menu, so I assumed all was well.On Friday nights I run my anti virus and anti spyware software. I started AVG anti-spyware. I checked on it 2 hours later and my boot up screen was on the monitor. By bootup screen I mean, when my machine is turned on, it stops soon after the bootup begins and says something about the Processor was changed??? and prompts me to hit F1 to continue or Del to go to the BIOS setup. I always hit F1 and the machine always bootsup just fine.Something happened while AVG was running to shut down the computer, what I don't know and I don't know if it is connected to the Media Player update or to a virus I picked up the night before (4 of us use this computer, so viruses and adware are not uncommon - I automatically run Norton Anti-virus and manually run AVG, Ad-Aware, SuperSpyware and Lavasoft). HOWEVER, this time when I hit F1 the machine did not boot up but rather loaded my desktop but with NO tray, NO icons and no response from the Windows key on the keyboard, but with only the mouse pointer on the screen. I could get the Task Manager by hitting Alt-Ctl=Del, but nothing else.I rebooted several times, and always ... Read more

A:Boot problem of main operating system

Are both of these installations in the same partition?Since you can open Task Manager, Click on the Applications tab and end all running processes.Start a new task and type explorer.exe and OKHopefully, you should have your Desktop back and you can run some tools--------------------------------------------------------The process of cleaning your computer may require you to temporarily disable some security programs. If you are using SpyBot Search and Destroy, please refer to Note 2 at the bottom of this page.Please download Malwarebytes Anti-Malware and save it to your desktop.alternate download link 1alternate download link 2Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself.Press the OK button to close that box and continue.If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, lea... Read more

Read other 21 answers
RELEVANCY SCORE 40.8

Hello, I have a problem with any Realtek driver since I updated from Windows 8.1 to 10 (x64).
On every boot, I have no sound on the rear speakers : the black pin switches automaticaly to "side". I have to reconfigure the black pin to rear every time !

Did someone had a similar issue ?

Here's my config if it helps : Asus Sabertooth Mark 2 and Logitech Z906 5.1 speakers.

A:Realtek Audio 5.1 configuration : rear speaker switch to side speaker

Up !

Read other 10 answers
RELEVANCY SCORE 40.8

HI I am facing audio problem for the last few months. when i install window 7 its automatically install audio driver which plays built in laptop speaker but exteranl headphone/microphone do not play sound. Same like this if i install given audio driver of hp probook 6550b which is sp48147 then headphone play sound but spearkers do not. I have installed windows many times to solve this issue but still this problem is existing. Please help in resolving this issue

A:Laptop speaker play sound but external headphone or speaker ...

Hi, Please try to enable it using the following steps (a) Right click the speaker icon,(b) Click Playback devices.(c) Right click External speakers (or similar) ,              (d) Click Enable,(e) Click Apply/Ok Regards.

Read other 1 answers
RELEVANCY SCORE 40.8

I have had a 5.1 speaker arrangement on my Vista x64 PC for some time. Today, the front left speaker decided to stop working correctly. When trying to plug my headphones in to a rear jack on my motherboard (onboard sound), I noticed that sound was only coming through the right earphone. I decided to give up with trying to listen through my headphones for the time being and plugged my speakers back in, only to find that now my front left speaker wasn't working correctly. I tried to adjust the balance on my speakers, as I thought I could hear a whisper of a sound through the front left.
The front left speaker is producing sound, but at a greatly reduced volume to the rest of the speakers, I have to set the balance to the following to make FL and FR speakers 'the same' volume (by ear).
FL volume: 100
FR volume: 0
I have my speakers plugged in to 3 jacks on my motherboard (out of 6).
The green jack for FL and FR.The black jack for RL and RR.The orange jack for C and SubW.I have been unsucessful installing Realtek (which is a shame, because on my last motherboard I was able to solve the problem with that somehow, but I can't remember how) as it states the drivers are not supported. Which I'm assuming means my motherboard doesn't support it.
My motherboard is an MSI Intel p35 Neo.
I have had this setup working fine for around a month.My speakers are labtec (but I don't see how that would matter).I am currently using the normal drivers that come with Vista.Any ideas?

Regards, Grah... Read more

Read other answers
RELEVANCY SCORE 40.8

I hope I've chosen the correct category for this issue. I have a Dell Inspiron 660S desktop computer currently running Windows 7. I need to be able to move around my home from room to room with a single speaker (not a pair of speakers) that provides good volume to overcome other machine noises (not extremely loud noises, but not a quiet environment either). I have tried blue-tooth (two different doggles) and several blue-tooth remote speakers (single-speaker) but the volume is not good and the reception is generally bad. The distance is not more than 20 feet or so but it is through walls (and sometimes up one flight of stairs) and my blue-tooth reception has been sporadic at best. (I haven't tried any speaker "sets" because I often move from room to room and multiple speakers are too cumbersome.)

I gave up on blue-tooth and decided to try a wired USB-powered speaker. I bought a 25 foot USB extension cord and two different USB-powered speakers which worked fine as far as the reception went (of course) but the volume was insufficient on both. I verified that the volume was up 100% on computer as well as on the speakers themselves.

I have small BOSE computer speakers (positioned at left and right sides of monitor) connected to my desktop computer for normal computer activity like movies and playing music and they sound great and I never have to turn the volume up more than about half way. I would like to be able to accomplish the same with a portable remo... Read more

Read other answers
RELEVANCY SCORE 40.4

I have a Compaq Presario which has a fresh install of Windows 7 (legit). All was fine until I was playing a game on Facebook and when I went to play it again one day it wouldn't load properly to the game. I saw a popup prompting that to play games you might want adobe flash player installed but I am fairly sure I installed that when I installed windows7. I am normally very thorough but I tried to reinstall it anyway since it wouldn't or shouldn't hurt.
 
I then found that it wouldn't follow all the way through on the install. Partway through the install I get a popup saying "Installation encountered errors. Actionlist not found."
 
I am also getting messages almost everytime I try to go to a website. I get a screen message that the site is dangerous and I have to agree to an exception in my security to get there. I never set my security that high or like that. It has done that on it's own. I am trying to find where to lower the sensitivity but have had no luck so far.
 
Sometimes when I left click on a link or anything on the webpage that requires a left mouse click it does not accept it. I know that there is nothing wrong with the mouse. I have tested and confirmed it.
 
Does anyone know what might me happening. My Avast virus scan shows nothing. I have Tune up Utilities and it fixed all problems it found but no help and also I am having problems with windows update. Please help if you have ideas about what is going on. Everything was fine until I put the... Read more

A:Main Problem is Windows 7 not allowing updates or installs

You can adjust your security setting from 'Control Panel / Internet Options / Security' but it is possible you have picked up a malware infection. I would advise that you download Malwareytes from here :
 
Malwarebytes Anti-Malware

 
and run it as per its instructions. If this shows anything that you cannot confidentally deal with yourself, or that Malwarebytes cannot deal with on your behalf, you should post baqck here but in the 'Am I infected' section.
 
Chris Cosgrove

Read other 2 answers
RELEVANCY SCORE 40.4

Already found the wayout of thi problem!
Problem with Iexplorer main page,always open(http://213.159.117.134/index.php) !Yee I now this is most often problem,but i need help with it,and regedit dosn't help with it!May be i'm doing something wrong or not doing something! Adware dosnt help!

Logfile of HijackThis v1.97.7
Scan saved at 16:33:25, on 2004.10.17.
Platform: Windows 2000 SP2 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\system32\spoolsv.exe
C:\Program Files\AVPersonal\AVGUARD.EXE
C:\Program Files\AVPersonal\AVWUPSRV.EXE
C:\WINNT\System32\svchost.exe
C:\FaxE_Run\FaxECtrl.exe
C:\WINNT\system32\regsvc.exe
C:\FaxE_Run\FaxEPrnt.exe
C:\WINNT\system32\MSTask.exe
C:\FaxE_Run\FaxEPurg.exe
C:\FaxE_Run\FaxERecv.exe
C:\FaxE_Run\FaxEStat.exe
C:\FaxE_Run\FaxEScdr.exe
C:\FaxE_Run\FaxEDisp.exe
C:\WINNT\System32\WFXSVC.EXE
C:\WINNT\System32\WBEM\WinMgmt.exe
C:\Program Files\Symantec\TalkWorks\WFXMOD32.EXE
C:\WINNT\Explorer.EXE
C:\WINNT\System32\wfxsnt40.exe
C:\WINNT\System32\atiptaxx.exe
C:\WINNT\System32\systime.exe
C:\WINNT\System32\internat.exe
C:\WINNT\System32\systime.exe
C:\Documents and Settings\Administrator\Application Data\tacr.exe
C:\Program Files\Symantec\TalkWorks\WFXCTL32.EXE
C:\TYPSoft FTP Server\ftpserv.exe
C:\Program Files\AVPersonal\AVG... Read more

Read other answers
RELEVANCY SCORE 40.4

I have just bought a lenovo ideapad z510 and i found that the right speaker is louder than the left speaker...... I made sure that the balance is exactly the same but still the problem exsists ......... any help

A:lenovo z510 right speaker louder than left speaker

Hi Heshamelmilady,
 
Welcome to Lenovo Community!
 
I?m sorry to hear that the Audio balance is not as expected from the internal speakers. Hence, I suggest you to re-install the Audio driver and also check if the issue is same with the external Speakers/ Headphone connected.
 
Hope to hear back soon
 
Best Regards

Shiva Kumar






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 40.4

I am running Windows 10 Professional with current up-to-date updates on my Dell Inspiron Laptop.

Several days ago I noticed that plugging in current headset no longer muted the internal speaker. I know that it is not the headset as it works perfectly on another computer.
.
Doing a web search has not resulted in finding the problem, let alone a solution. Further my anti-virus is up-to-date, as are the microphone and speaker drivers.

Pointers in the direction of a solution will be much appreciated.

Thanks in advance.

A:External Speaker Fails to Mute Internal Speaker

What audio codec does your laptop use?

It will be listed in device manager. The VEN DEV combo will be enough information.

You'll find it in the device properties details tab, specifically, the "Hardware IDs" section.

It will resemble this:

Code:
HDAUDIO\FUNC_01&VEN_10EC&DEV_0288&SUBSYS_10EC0191&REV_1000
Usually the audio codec chip itself will detect an external speaker is plugged in. Have you checked your audio device's configuration software? It should have a shortcut in the classic control panel.

Read other 1 answers
RELEVANCY SCORE 40.4

Hello Expert, I see lots problems same as me but not get right solution. Echo coming to my laption while typing or make noice near laptop, it won't stop until mute my speaker. I have windows 10 64 bit.  Please help if we have any solution. ThanksP

A:Echo when speaker unmute. Stop while mute speaker. Please he...

Hi, Some things to check for? You will first want to ensure that this ?echo? effect is not being caused by a third party application. The easiest method would be to test the default Windows sounds, then try configuring the speakers, and if the issue persist to try Safe Mode - to eliminate third party software or services as the cause. Use the default Windows Sounds 1.     Click Start, click Control Panel, click Hardware and Sound, and then click Sound.2.     In the Sound window click on the Sounds (tab).3.     You will see a box with a list of items one being Asterisk.4.     Click on Asterisk, or any item in that box, and then click Test.5.     You should hear audio coming from your system.6.     If the clip was not long enough select another item, and then click Test.7.     Determine whether or not the distorted audio is present. Configure the speakers 1.     Click Start, click Control Panel, click Hardware and Sound, and then click Sound.2.     In the Sound window right-click your Speakers and select Configure Speakers.3.     Follow the on-screen setup, and Test the available configurations.4.     Indentify whether or not one configuration appears to have less of an ?echo? than others.5.     If the ... Read more

Read other 2 answers
RELEVANCY SCORE 40.4

My speakers intermittenly stop working.  If both left and right speakers stop working.  I can push the case to the right of the touchpad and it will start working.   If just the left is not working I can usually press to the left of the touchpad.   Also shortly after this started the Left side USB stopped working.   Any ideas  on how to fix this without sending it in?

Read other answers
RELEVANCY SCORE 40.4

I have an issue with my 5.1 speaker. Only the front left and front right would produce sound. However, when i run the speaker test on the CP, everything are working fine.

Here's what I did.

Thanks in advance!

http://support.creative.com/kb/ShowA...785):obj(51680)

here's what i found. I'm using an on board sound card. Don't really understand what Creative is talking about. lol.
 

A:Solved: 5.1 speaker, front speaker produces sound only.

Read other 16 answers
RELEVANCY SCORE 40

have been having a long running problem with not being able to connect to Microsoft downloads, and I cannot update my computer. It been going on for about 6 months now, and I have tried many many trouble shooting steps, and cannot resolve the problem. I think there many be a virus or trojan that my avast cannot get rid of. I have some problems with redirecting on firefox, this problem used to be worse, but has gotten better since I got avast. But nothing I have tried has fixed my inability to update or connect to microsoft downloads.

DSS.txt

DDS (Ver_09-12-01.01) - NTFSx86
Run by Jessie at 14:58:36.44 on Sun 02/28/2010
Internet Explorer: 7.0.6001.18000 BrowserJavaVersion: 1.6.0_15
Microsoft? Windows Vista? Home Premium 6.0.6001.1.1252.1.1033.18.2038.872 [GMT -6:00]

SP: Windows Defender *enabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}

============== Running Processes ===============

C:\Windows\SYSTEM32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\System32\svchost.exe -k secsvcs
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\SLsvc.exe
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k NetworkService
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Al... Read more

A:Main Problem: Cannot update windows or connect to download.microsoft.com

Hello and Welcome. Please subscribe to this thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Subscribe.

Before beginning the fix, read this post completely. If there's anything that you do not understand, kindly ask your questions before proceeding. Ensure that there aren't any opened browsers when you are carrying out the procedures below. Save the following instructions in Notepad as this webpage would not be available when you're carrying out the fix.

It is IMPORTANT that you don't miss a step & perform everything in the correct order/sequence.

---------------------------------------------------------------------------------------------

One or more of the identified infections is a backdoor trojan.

This type of infection allows hackers to remotely control your computer, steal critical system information and download and execute files without your knowledge.

If you do any banking or other financial transactions on the PC or if it should contain any other sensitive information, please get to a known clean computer and change all passwords where applicable, and it would be wise to contact those same financial institutions to apprise them of your situation.

You can read this: How Do I Handle Possible Identify Theft, Internet Fraud and CC Fraud?

--------------------------------------------------------... Read more

Read other 13 answers
RELEVANCY SCORE 40

I sadly don't really know to much about how to fix computers past the more basic problems so I hope this is all the relevant information
My computer was fine 2 days ago and I can't think of anything that might have caused it to, well, not be. It hasn't been dropped or had anything spilt on it, I scan it regularily for viruses, malware and the like, haven't installed or downloaded anything recently either.
Anyway, yesterday when I logged in it took 20 minutes from submitting the password to fully loading the desktop. It was fairly slow and nothing Google would work, upon trying to open AVG anti virus it crashed. I opened it in the safe mode, ran a few scans, followed the windows prompts, restarted it and it worked fairly well (the login delay continued). Later in the evening upon trying to start it though it would not log in saying that the C: Drive cannot be located and then bring me back to the account screen. This morning when trying to log in in order to copy down the error message, it blue screened and said there was an essential compnent missing and rebooted.
I can still log in on the admin account but it will not load the desktop icons or any of the menu items - only My Computer and Control Panel will open.
I'm presently on exchange and I need my computer not only for work but because my laptop is the only communication I have with back home and I really need it to be working as soon as possible.
Any suggestions or help would be greatly appreciated. (Should I restore i... Read more

A:Windows 7 evolving problem - log in main account/hard drive

Hi and welcome to TSF what is the make and model of your laptop ? do you have a install or recovery disc ? have you tried booting to F8 and choosing last known good configuration

Read other 6 answers
RELEVANCY SCORE 39.6

I had (still have?) the Windows XP Total Security virus - I *thought* I removed that main problem with MalwareBytes, but I'm now having browser (IE) redirect issues and "IE Script Error" pop-ups. Also, Windows Updates, Avira Updates are disabled.
I have run all reports: DDS below and Attach & GMER reports attached.
Thanks in advance for your help!

.
DDS (Ver_11-03-05.01) - NTFSx86 NETWORK
Run by dwa1000 at 10:28:46.73 on Wed 04/13/2011
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.1014.617 [GMT -7:00]
.
AV: AntiVir Desktop *Disabled/Outdated* {AD166499-45F9-482A-A743-FDD3350758C7}
.
============== Running Processes ===============
.
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\system32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Documents and Settings\dwa1000\Desktop\dds.scr
.
============== Pseudo HJT Report ===============
.
uSearch Page = hxxp://www.google.com
uStart Page = hxxp://www.cnn.com/
uSearch Bar = hxxp://www.google.com/ie
uInternet Connection Wizard,ShellNext = wmplayer.exe //ICWLaunch
uSearchURL,(Default) = hxxp://www.google.com/keyword/%s
mSearchAssistant = hxxp://www.google.com/ie
BHO: Adobe PDF Link Helper: {1... Read more

A:I had (still have?) the Windows XP Total Security virus - I *think* I removed that main problem with MalwareBytes, but I'm...

Hello and welcome to the forums!My secret agent name on the forums is SweetTech (you can call me ST for short), it's a pleasure to meet you. I am very sorry for the delay in responding, but as you can see we are at the moment being flooded with logs which, when paired with the never-ending shortage of helpers, resulted in the delayed responding to your thread.I would be glad to take a look at your log and help you with solving any malware problems.If you have since resolved the issues you were originally experiencing, or have received help elsewhere, please inform me so that this topic can be closed. If you have not, please adhere to the guidelines below and then follow instructions as outlined further below:Logs from malware removal programs (OTL is one of them) can take some time to analyze. I need you to be patient while I analyze any logs you post. Please remember, I am a volunteer, and I do have a life outside of these forums.
Please make sure to carefully read any instruction that I give you. Attention to detail is important! Since I cannot see or directly interact with your computer I am dependent on you to "be my eyes" and provide as much information as you can regarding the current state of your computer.
If you're not sure, or if something unexpected happens, do NOT continue! Stop and ask!
In Windows Vista and Windows 7, all tools need to be started by right clicking and selecting Run as Administrator!
Do not d... Read more

Read other 2 answers
RELEVANCY SCORE 39.6

Hello,

I purchased Creative Gigaworks T40 series II PC speakers in April. Just yesterday, the sound is cutting out when I play music CD's on the computer. I have a home-built PC that has been performing very well. I have an ASUS M4A78LT-M LE motherboard with on board sound card. Operating system is Windows 7 home premium. Below is the list of troubleshooting I have tried:

1. Rebooted PC
2. Checked computer and speaker connections
3. Made sure all hardware has latest drivers
4. Ran anti-virus scan. No virus detected.
5. Windows diagnostics didn't detect any hardware problems
6. Adjusted and experimented with settings in Windows Media Player

I also hooked up the speakers to a stand-alone DVD player (non PC). I watched 4 hours of DVD movies and the speakers performed flawlessly.
Then I played a flight simulator game on the PC for a couple hours. Again the speakers performed flawlessly.

Through process of elimination, this leads me to believe the problem is Windows Media Player software. This is what runs music CD's off the PC.
Either that, or my CD/DVD combo drive.

Past experience has shown me that sooner or later any version of Windows Media Player will cause problems.

Am I on the right track? Or am I overlooking another cause?

A:PC speaker problem, I think I narrowed down problem area

I never use WMP myself, but if you suspect that's the problem you could download a free media player like VLC and see if that improves the situation.

Read other 2 answers
RELEVANCY SCORE 39.6

Hi,

I remember deleting something named "Realtek HD blah blah" from the below screen.

http://www.sevenforums.com/attachmen...1&d=1341120073

From then my normal speaker (audio jack) at the back doesn't work. But my USB speaker works.

I tried to reinstall the audio driver from my motherboard CD and nothing happens.

Please help. This is very annoying.

A:Analog Speaker not detected. USB speaker works

If you deleted RealTek, that is a PC sound (Integrated on the motherboard) and most likely why your speakers are not working. You must have a PC sound device, other than a USB connected device, for the speakers to work.

First step is to reinstall the RealTek drivers. Its best to get the driver either from your PC vendor or Motherboard vendor, as applicable and install that as the first step. Then make sure your "speakers" (sound card) is set as the default playback device in the Control Panel/Hardware and Sound/Sound panel.

Read other 1 answers
RELEVANCY SCORE 39.6

I've been having something strange happen with my speakers but only resonantly. I got a cheap pair of headphones resonantly but since I've plugged them in when I use a mic my speakers sound extremely bad. I use a laptop that has windows 7, 4GB RAM and HD sound.
 

A:mic and speaker problem

2haloes said:


I've been having something strange happen with my speakers but only resonantly.Click to expand...

That's almost poetic... What's the Make and Model of the system...We can get more info from that...
 

Read other 2 answers
RELEVANCY SCORE 39.6

Speaker Problems

Hello. I am fairly new to the computer world. I recently bought a computer from Dell. The model is 4400. I really didn't like the speakers that they gave me so since I like to play a lot of games

I decided to buy surround sound speakers for my computer. The product and model name of the speakers is: Creative Inspire 4.1 4400. I went home and set up my speakers.

When I had them all arranged where I wanted them I tested them out and I found that my two rear speakers weren't working. I then checked all of the connections and I found out that I only have one line out port that I can connect into. So I was wondering if anyone knew of a way to turn my line in port into another line out port (without having to take apart my computer a whole bunch). Or if that can not be done could someone tell me of something I could buy that I could use to make my speakers work. Thanks.
 

A:4.1 Speaker Problem

There are two solutions for this problem:

The cheap fix: Buy a Y adapter(one male plug and two female plugs) and plug your two speaker lines into the one jack.(this is really a waste of the 4.1 surround sound speakers though)

The correct way: Buy a new sound card with setreo out, such as a Sound Blaster Live! or Audigy.
 

Read other 6 answers
RELEVANCY SCORE 39.6

I have notebook ASUS W 1 SNA series. I have serious problem since I can not use the speaker to speak on Skype. Can anyone give me idea whether it has something to do with driver or hardware/speaker.

all suggestions are very helpfu.l thanks.
 

A:speaker problem

speakers make the sound, it doesn't pick it up. for that ypu'd need a microphone
 

Read other 1 answers
RELEVANCY SCORE 39.6

Right now, I can't hear any sound from speaker, Except when I put it on max, There would be a little cracking noises. I tried finding guides from Google, but couldn't find any, and lead me to this site~ So please help me fix this problem ASAP
 

A:Speaker problem

Read other 13 answers
RELEVANCY SCORE 39.6

I have had these two speakers for about four-five years, they have lasted me threw threw some heavy albums and long nights of gaming. Today when I threw in a CD, they sounded muffled and such. I fiddled around with the volume controls on my computer and still the same. I have no other pair to test out to see if they are really dieing, so should I just go out to get a new set of speakers (I have had my eye on these Logitech ones for a while)? Thanks for any advice

A:Speaker Problem

Hmmm....I've never had a set of speakers just start dying like that. I have, however, had speakers "blow" without my knowledge, and sound crappy (distorted, somewhat muffled, etc.) and after playing with the sound controls, I ended up replacing the speakers. The only thing I'd check before replacing the speakers is that you don't have an effect turned on. Without me actually hearing your speakers make the muffled sound, I'd say that you *might* have enabled the "underwater" effect that makes everything sound muffled. I say *might* only because my son has done this to me, and it took me 20 minutes to figure out that he had sabotaged my audio .

I'm not sure if this will work, but try plugging in a headset your sound output. I can't remember the exact size of the speaker jacks, and if they're the same size as the headset jack. If it does work, and your headset sounds fine, then your speakers are messed up. If your headset sounds messed up, then the speakers arent' your problem, it's your sound card (or onboard audio) that's messed up, wich may or may not be fixed by uninstalling and reinstalling the drivers. You could always go get a cheap set of speakers from a dollar store or walmart (you should be able to find a really cheap pair for under $10) and try them on your computer (or borrow a pair from a friend).

Hope all this helps!

Read other 1 answers
RELEVANCY SCORE 39.6

My aunt has a bit of a speaker problem. When she downloads songs and listens to them, the sound only comes out of the right speaker (that happens in kazaa). When she puts a CD in, and listens to it in Windows Media Player, it still plays through the right speaker. But, when like windows xp starts up, the opening sound is played through both speakers. I double-clicked the volume logo in the bottom right corner and the balance is perfectly fine (bar is in the middle). Please help me so that she can listen to music and CDs through both speakers.

Thank You,

JTJ
 

Read other answers
RELEVANCY SCORE 39.6

i am having a speaker problem were my speakers have a constant buzzing noise.
i get sound but the noise get annoying
 

A:speaker problem

Read other 6 answers
RELEVANCY SCORE 39.6

Ok, well I had my computer formatted a while back, it's a Dell Dimension 5150 running on Windows XP, since the format, the speakers have not worked, they are plugged in the correct place. The speakers are Dell, model A215 (manufactured by Samsung), when I open up the control panel on Sounds and Audio devices, under the Hardware tab it says everything is working properly, except for "Sound Blaster 16 or AWE32 or compatible (WDM)" Device type: Sound, video and game controllers, Manufacturer Creative Technology Ltd. it says "This device cannot start (Code 10)" I was wondering if that might be the problem? Can anyone tell me how to fix this and get my speakers working?

Thanks
Jay
 

A:Speaker Problem

Anyone?
 

Read other 3 answers
RELEVANCY SCORE 39.6

Ok,

I have an EVGA x58 LE motherboard. When I plug my speakers into the back they only play sound out of the right speaker, tried headphones, does the same thing (plays sound out of the right speaker).

I have audio ports at the front of the case, they work fine, beautiful sound.

My speakers work fine, so do my headphones.

Realtek audio drivers, most updated according to Realtek's website. No matter what I do, only the right speaker plays, the balance is not off or anything, most updated chipset drivers, most updated graphics card drivers.

Does anyone know how to fix this?
 

A:Speaker Problem

Read other 7 answers
RELEVANCY SCORE 39.6

Hello,

I have a set of pc speakers that work on a usb connection.

Trying to get a new set, non usb, working.
I guess the plug for these goes to the green jack on the back of my Dell pc.
Right ?

Nothing coming out.

How do I tell W7, or the pc, to use this jack, now, rather than usb ?

Thanks,
Bob

A:Speaker Problem ?

Open the Windows playback properties and make sure that the onboard sound is set as the default playback device. If it isn't showing, double check in the bios that it is enabled. You may also need to install the driver for it.

Read other 3 answers
RELEVANCY SCORE 39.6

I bought a pair of Altec Lansing speakers about half a year ago and have enjoyed using them. However recently whenever the speakers are turned on they give me this horrible static for a moment or two. I know it is not the speakers themselves because i have put my headphones in a jack on the speakers and the headphones do the same thing. I was wondering if there is a way to fix this problem and what is causing it? Maybe the cords?
 

A:Speaker Problem

I would recommend opening the case, and lightly jiggling the cables going to your sound card, while the system is running, to see if you can locate a bad connection. Of course, you should also check the cable connections going to the speakers.
 

Read other 2 answers