Over 1 million tech questions and answers.

slip stream MS window8 usb 3.0 driver into window 7 install CD

Q: slip stream MS window8 usb 3.0 driver into window 7 install CD

this could be somewhat complicated and should be either in driver section, or installation section or could be on both windows 7 and 8 forum.

here goes.. recently im into SSDs and usb 3.0 so i got myself a usb 3.0 flash drive, made it bootable with window 7 files on it and then install window 7 from flashdrive to my ssd which takes about 3 mins, very fast.

since window 7 natively does not support usb 3.0, i had to install usb3 drivers during installation screen which is a hassle because i have 4 laptops, which all have usb 3.0 ports, but each laptop uses different usb 3.0 drivers and thats where my problem is.

i could slipstream usb 3 driver into win7 install disc, then copy the disc files onto my flashdrive but then i would need 4 seperate flashdrives, or 4 times amount of files. then i thought about windows 8 which ive tried, it automatically detects usb 3.0 during installation screen just fine and of course theres no way it would know what drivers i am using, so obviously microsoft has a *general* usb3.0 driver they use themselves for windows 8.

if i can find that usb 3.0 drivers for windows 8, i should be able to slipstream into the window7 install cd, then of course copy it onto my flashdrive so i no longer have to install different usb 3.0 drivers everytime, correct?

plz help me out.. lol

Preferred Solution: slip stream MS window8 usb 3.0 driver into window 7 install CD

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: slip stream MS window8 usb 3.0 driver into window 7 install CD

Chances are Win8 has most of the USB 3.0 drivers so that yours is able to be installed. Absent this I would simply get the driver from optional Windows Updates which is how the installer drivers are updated and missing drivers supplied shortly after Win7 install.

Short of that keep the USB 3. driver on stick to install in Device Manager.

If you want to try to slipstream the Win8 USB 3 driver into your 7 installer using 7Lite to see if it will work, then that might be a fun project but hardly necessary.

Read other 6 answers

If one has a 2002 XP- PRO SP-2 OEM CD and has a CD with SP-3 from M/S is there a need for Slip Streaming.

A:Slip stream Yes or No

The slipstream disk is far superior to the upgrade in place option

The slipstreamed disk can be used as a repair disk without going all the way back to sp2

Windows is much smaller when you use the xp sp3 clean install

Even with sp3 I had 50 megs of critical updates from MS not including maliscous tool or IE 8

Read other 3 answers

I found this website driverpacks.net. How can slip stream those drivers into a install?

A:How can I slip stream a bunch of drivers that I found on the internet?

Why would get drivers from anywhere but the computer manufacture or manufacture of the hardware ?
Fish oil driver packages cause more issues than solutions.

Read other 2 answers

i have:
2 x seagate 80 gb SATA drives
asus p4s8x mx board with sis 694 /180 controllers
i have already:
made a raid 0 configuration from the raid bios utility
tried to install windows but it says there is no hardisk in your system
now i want :
make a slip stream cd of windows xp sp 2 with sis raid drivers
to install windows without using a floppy (F6 option) as i dont have a floppy drive
i need help and step by step please

A:Solved: how to slip stream a windows xp sp2 cd with sis sata / raid drivers

Read other 8 answers

After updating from window 8 to window 10 my sleekbook WiFi not working. Provide solutions please

Read other answers

Dear Tech guyz,
I've got this Dell laptop with Windows8 pre-installed.
I don't like this windows8 would therefore want to downgrade to windows7 without having to run clean install.

Is there a way out?

A:Downgrading window8 to windows7 without Clean Install

Read other 8 answers

Hello everyone and thank you in advance for reading this thread,

I have BSOD situation for a while. When I hibernate or put my computer asleep and leave this mode my computer freeze for a while before showing of a BSOD with driver power state faillure. I have windows 8 sometime it start freezing rightaway or sometime It happens like 10 sec later (after logging with my password). It bug also when I restart my computer the clean way. I first decided to solved this issue by doing a refresh of the system (I don't if it's the proper word as I and my window8 are French). It implies that all the softwares I have installed were erased but my files were saved. It might not have been my smartest move as it didn't change anything ....

I have run a whocrashed and it tells me that the issue come from a kernel &system :

On Sat 31/05/2014 15:18:22 GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\053114-281984-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7B440)
Bugcheck code: 0x9F (0x3, 0xFFFFFA8004629060, 0xFFFFF8012DDF47E0, 0xFFFFFA80045E8010)
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System


On Sat 31/05/2014 15:18:22 GMT your computer crashed
crash dump file: C:\WINDOWS\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bug... Read more

A:driver power state faillure -sleeping mode-ntoskrnl.exe-window8

Hi there,

Try updating your Intel rapid storage technology driver,

start end module name
fffff880`016e5000 fffff880`019af000 iaStorA (deferred)
Image path: \SystemRoot\System32\drivers\iaStorA.sys
Image name: iaStorA.sys
Timestamp: Mon Jul 09 13:42:33 2012 (4FFB4239)
CheckSum: 000AB20A
ImageSize: 002CA000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
There is a newer version here,

ASUSTeK Computer Inc. -Support- Drivers and Download K56CM

Under the others tab.

Have you tried updating your OS?

Microsoft Windows 8
Version du syst?me: 6.2.9200 N/A version 9200
Fabricant du syst?me d'exploitation: Microsoft Corporation
Configuration du syst?me d'exploitation: Station de travail autonome
Type de version du syst?me d'exploitation: Multiprocessor Free
Propri?taire enregistr?: Windows User
I only see a few updates installed. Have you tried updating to 8.1?

Read other 7 answers

Making a slip install of Office 2007.

My main question is after I make this slip
Using the setup.exe /admin and I make it like I think I want it.
I run the setup.
And it pops up....
Select a Microsoft Office product page.
With the radio dots asking what I want to install.
I have to go down to the MSOffice Professional Plus 2007 and then click continue.

When I first set up the setup.exe /admin I had to chose that one too.
Is there a way it will just install the MSProPlus2007 without asking?

A:Slip install of Office 2007

I have the Slip working. It works great.
But is there a way to get rid of the part I have to select the PRO Plus version.
After selecting that and hitting OK it installs like it should.
I don't want to have to do this for 1000 users.

Read other 1 answers


I need help..please ))
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..

advice please..??

A:Window 7 64 bit cannot install driver sotware(canon printer driver)

Hi did you try a system restore to a point when it did work.

Read other 2 answers

I plugged my Lenovo Tab s8 to my PC and Windows tried to install the MTP driver via Windows update. It found the driver but when want to install it show me installation failed :(
In device manager it show me "Lenovo MTP interface" with a yellow sign. How can I solve it? I download a driver from Lenovo support and installed it too but problem not solved :(
Any idea?


Read other answers

 do you reset windows on a hp stream laptop

Read other answers

Just got a new Asus Zenbook UX31E and am having a certain problem where if I plug my external drive (Samsung S2 1TB, USB 3.0, 2.5") into the 3.0 port windows tries to install a driver for the new device but fails. Now the drive powers on when connected but wont load up as an accessible drive and is not found is disc management.

I've tried the HDD successfully in another laptop with USB 3.0 and it works fine on my Zenbook's USB 2.0 port so I'm guessing there's no problem with the HDD itself. Also I have tried a small flash drive in the Zenbook's 3.0 port which worked fine.

I have tried updating the USB 3.0 driver to the latest version via Asus' driver database but have got the same result.

I would of thought with such a prestigious laptop someone else would of run across this problem but all my googling has turned up ziltch.

Any ideas/suggestions much appreciated!

(Running Windows 7 Home Premium)

A:USB 3.0 External HDD Failed Window 7 Driver Install on USB 3.0 Port

Is anyone able to point me in the right trouble shooting direction? Like are there any generic USB 3.0 drivers out there that could be used in place of Asus' ones? Has anyone come across an issue like this before?

Read other 9 answers

I brought two brand new Sabrent 6 Channel 5.1 Sound 3D PCI Sound Cards. Installed both on two exact systems except one is running windows XP and the other is running Windows 7 Ultimate 32bit.

No problems installing card and driver in the XP machine, but the window 7 doesn't even pick up that's it's there. I tried to installed the driver hoping maybe this will cause windows to see the card but the installation starts and after a few seconds comes up with and error message that says "Do not support this platform 0" this is coming from the CD that came with the card.

I tried downloading and installing the driver from Sabrent, and C-Media and with each installation attempt same error message. Does anyone have any idea?

A:Sabrent SBT SP6C Driver Won't Install Window 7 Ultimate 32bit

Have you contacted Sabrent about the problem? According to the Microsoft Windows 7 compatibility site there is compatible drivers available from Sabrent.

Read other 5 answers

Hi there, I just bought a hp stream 11 laptop (window 10 home) and I used the outlook.com account to set up the laptop and I want to change to my gmail. I haven't activate the Microsoft Office 365 yet. The reason I wanted to change is I am more familiar with the gmail and some other staff. Here are my question,1) How can I change the set up eamil address from outlook.com to gmail.com?2) If I can change the set up email address, does it effect the Microsoft office 365?3) If there isn't any option, can I format the laptop and reset again? Best RegardsJohn

Read other answers

ADM QUICK STREAM ERROR after upgrading to Window 10 Message reads "The license information to use this software is not found" How can I fix this? Fingerprint scan does not work, again after upgrading to Window 10.

A:ADM QUICK STREAM ERROR after upgrading to Window 10

Hi @McHarg , Welcome to the HP Forum! It is a terrific place to find answers and tips! For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide: First Time Here? Learn How to Post and More.  I understand that after upgrading to Windows 10, you receive the message "ADM QUICK STREAM ERROR The license information to use this software is not found" To assist you I will need to know what your exact model of HP notebook is.HP Notebook PCs - How Do I Find My Model Number, Serial Number or Product Number?.  Did you upgrade from a previous version of Windows and if so what was it or did you do a clean install?  Have you run the Windows troubleshooter?  Have you done all your Windows updates?  Have you run the  HP Support Assistant ? Hope to hear back from you soon. Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the ?Thumbs Up? below is a great way to say thanks!   

Read other 2 answers

Help....I am getting a constant stream of Window's dialog boxes. If left undeleated I get over 100 and they are constantly in the way of anything I am doing on the computer. The boxes are titled: C: WINDOWS\system32\cdm.exe ... I tried to do a system restore but was unsuccessful. I am also not able to reinstall the OS. Please provide easy to understand fixes since I am somewhat a computer novice. THANKS

Read other answers

ADM QUICK STREAM ERROR after upgrading to Window 10 Message reads "The license information to use this software is not found" How can I fix this? Fingerprint scan does not work, again after upgrading to Window 10.

Read other answers

Everytime I tried to open rtsp://streamserverIP:554/live.sdp (my IP camera video stream file); realPlayer Basic v14 kept opening an upgrade to realPlayer Plus window. When I click on "No thanks" another window for free trial opened. This was an endless loop. The IP camera video stream is H264 format and streams just fine on my other Windows 7 PC. Well, to make a long story short; the Win 7 Pro machine did not have QuickTime player installed which provided the H264 codec needed. I installed QuickTime and the IP camera now streams via realPlayer 14. I suspect you could install any H264 codec and accomplish the same thing and avoid the Plus upgrade. I hope this post will help others with similar realPlayer issues.

A:RealPlayer opens an upgrade to Plus window when opening a video stream

Thanks Allenn. I'm a regular RealPlayer user and appreciate the information. I haven't had this problem (yet) but now I'll know how to handle it.

Read other 1 answers

Hy every one. I want to scure my live video during broadcasting. I am using window media encoder series 9. I want to add some script in session's security of WME. Any one can give me solution. I also have problem to get username/password window at the end of Broadcast a Live Event wizard in WME 9. Both of problem are explianed in figures.

Thanks & Regards,

Shahzad Ahmad

Read other answers

A̶̲̥̅♏ having issues updating my window8 64bit actually I want to install net framework3.5

A:window8 update

Are you starting a new thread on the same issue?

Microsoft net framework 3.5
How to enable .NET Framework 3.5 on Windows 8 in Offline Mode

Read other 1 answers

I know ati released their new 7.5 cards, and my question is I can't seem to select my capture device from the firefox flash. Is there a driver that will make it show on firefox? I know my cam driver works, but the ati device capture won't show under the list on vista x64. Any help would be appreciated.


Read other answers

My HP laptop window 8 want let me get pass welcome page go on internet because the screen is flashing

Read other answers

I am looking for this driver, pci encryption/decryption controller driver. I have tried using the support assistant software without results and manually downloaded and installed all the drivers from the support page. Thank you.

A:HP Stream Notebook 11-d007na driver

Hi,Please try this:https://support.hp.com/us-en/drivers/selfservice/swdetails/hp-stream-11-d000-notebook-pc-with-datapa...RegardsVisruth

Read other 1 answers

 Hello, I did a clean windows 8.1 install on my HP stream x360, (not the HP WIN8.1 recovery mode)  downloaded all drivers here from the HP website. Everything worked accept the touchscreen.  In system i see "no pen or touch is available for this display".  Pen and Touch is missing in control panel., also Tablet PC settings is missing.  Is there any touchscreen driver available for the HP Stream x360 ?  Thanks in advance . Marcel

A:Touchscreen driver HP stream x360

After installing the drivers http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=7579... and the touch screen still not working... Check if touch screen is enabled/disabled:Device manager > Human Interface devices > Right click "HID compliant touch screen" > Click enable Make us know if it worked!  

Read other 9 answers

Hi,Apologies if this has been answered already, but I couldn't find anything on the boards. My ideapad is showing error saying PC needs to be repaired. error code 0xc0000098. I thought I could use my Windows 8 disc to recover/repair, but when using the Repair facility (Repair > Troubleshoot > Refresh your PC) I get the message "drive is locked". Microsoft tell me this is something only Lenovo can help with... Does anyone have an idea what I might need to do? I can't pull the drive out or send the pc away - it's my Mum's; she's visiting and lives on another continent... Many thanks for your help!!Marc

A:Trying to repair Window8 but "drive is locked"

Is it possible you have bitlocker turned on?

Read other 1 answers

please help.me

View Solution.

A:I can't open my hp window8.1 from sleep mode

Please help me

Read other 2 answers

The update today (kb3054476) says it's for when you use (stream.sys driver-based applications) , what exactly is that?

Looked on "google" but not much help , i have Win 7 64 bit SP1 .

Thank you

A:Curious about what (stream.sys driver-based applications) is .

-Article ID: 3054476 - Last Review: May 19, 2015 - Revision: 1.0
May 2015 update for stream.sys driver-based applications in Windows 7 or Windows Server 2008 R2.

This update helps Microsoft improve the experiences when users run stream.sys driver-based applications in Windows 7 Service Pack 1 (SP1) or Windows Server 2008 R2 SP1, such as the performance and the quality improvements.


Could be for Windows Media based Application, webcams (not entirely sure) ect...Got it too today's evening.

Read other 9 answers

Using Window 8.1, today I get updates and than it say update not complete undoing changes....... but it stuck here. I does system restore but I get error on this
Which is unspecified error accured during system restore (0*80070017). And I don`t have sysm image to do system image recovery.. please help me it ruined my whole day..

Read other answers

hi I have a toshiba laptop using windows 8 having no problems .I have done a restore .repair , reinstalled my programs etc but I cant run live tv off sky news or virgin media everywhere,
I can run these off the normal desktop but not off windows metro screen , can anyone help please


Read other answers

well i ordered a studio xps 9000 and i forgot to ask my dell salesperson about how my free mcafee subscription be renewed if i install a window 7 free upgrade from a window vista?well my mcafee free subscription be gone forever or is there a way for me to get it back???

A:mcafee free suabscription be gone forever if install window 7 from window vista?

Me too

Read other 1 answers

Need SATA AHCI driver/controller for  HP STREAM 13-C000NT Product Name:  STREAM 13-C000NTOperating System: Microsoft Windows 8.1 (64-bit)Hello, I need the SATA AHCI driver/controller for STREAM 13-C000NT. Please help!

Read other answers

Reopening this problem of network device driver disappearing. only had this machine for less than a month! reloaded device driver and it worked temporarily but the same problem occurred again.  at the advice of hp support also loaded new bios and also returned the pc back to original factory settings/software. wi-fi temporarily worked, but by the next morning again the network device driver disappeared.  waiting now to see if hp will receive it for fixing.

A:hp stream 11 network device driver disappearing so unable to...

Same problem since the end of last week. Already re-set the pc with HP assistance on the phone. After that it worked for 10 minutes and then again unable to see any network. If a restart I can then connect for few minutes and then back agian to no networks detected, no wifi.Is there a way to fix this without sendind the laptop away?Thanks

Read other 9 answers

High Pitched Chipmonk Audio on Window8 with Realtek HD

Recently my laptop started sounding like the Chipmonks, with a higher pitch, set to all of the sounds coming out my computer. After reading dozens of useless posts, I came to the conclusion that this 'must be a settings' issue, and started looking around. The culprit, in my case, was a setting for Realtek HD sound card. This is what I did to correct it:

1. Put on some music or sound for monitoring.
2. Right-click on the (little red speaker) icon, for the Realtek HD sound card on the toolbar (or find in programs).
3. Click on 'Sound Manager'
4. Click on 'Sound Effects'
5. Find the 'Karaoke' setting.
6. Set it to '+0'
7. IMPORTANT: Click 'ok' on the bottom right corner.

That should do it.
Setting that Karaoke tab up will increase the sound pitch for all audio on the computer. Setting it down, will lower the pitch for all of the audio. I hope this helps someone out there.

Read other answers

Hello guys
Yesterday I updated Winndows 8.1 Preview to Windows 8.1 Final version,but when I reboot, this appeared.And I cant activate Windows.What I have to do .

A:Windows 8.1 Preview after updating final version Window8.1

Are they asking for a product key ?

Read other 13 answers

Recently I have been getting the message" New Hardware Found" when I use Windows Media Player. The hardware is called BDA Slip De-Framer and it wants me to install it. Is this some kind of spyware? I did an Avast scan and a spybot scan and they both came up clean. I've put an HJT log here, so could someone please look at it and let me know if there's anything weird in it?


Logfile of HijackThis v1.99.1
Scan saved at 13:46:20, on 10/11/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16544)

Running processes:
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Alwil Software\Avast4\ashMaiSv.exe
C:\Program Files\Alwil Software\Avast4\ashWebSv.exe
C:\WINDOWS\System32\DLA\DLACTRL... Read more

A:BDA Slip De-Framer?


Read other 2 answers

After installing Win XP SP2, I find that the OS will no longer recognize my LEGAL copy of Win XP Pro. I get a message saying that there is a more advanced OS on my machine and it will not boot up so that I may try and repair the OS. As we all know there is no new version on the market as of yet. I found that there is a " fix" called "Slip Streaming", but it is fairly complicated and after trying to follow the directions I became completly lost. Has anyone else run into this problem and found an easier fix. I am running a generic machine I buillt with a amd barton 2800 chip , 128mg ATI graphics card, 1 gig of ddr 2700 RAM on a recent MSI board, and am working with Roadrunner . Appreciate anyone with an idea on this item. Thank you. l

A:Slip streaming.?

Read other 8 answers

What tools would i need to perform a slipstream install of Windows Vista Ultimate with all updates and service packs applied?

A:Slip Streaming SP2

Don't know how much different than XPhttp://www.bleepingcomputer.com/tutorials/slipstreaming-windows-xp-to-create-bootable-cd/

Read other 2 answers

I've recently had to completely wipe my pc... got all my drivers back bar one... the bda thingy... its not on any of my recovery discs... any suggestions on how to fix????

much appreciated...

oh don't know much about pcs so idiot explaination needed

A:bda-slip de framer


If you can tell us the name of the driver file perhaps someone can find it for you.

Read other 1 answers

Hi Anyone,

I've slip streamed SP 2 into XP a while back, have a CD with the final product on it and have used it successfully.

Now I'd like to add SP 3 to this. Can I slip stream SP 3 into this CD? If so, I take it that it's done the same way as slip streaming XP and SP 2 together? If not, then how?

Also, now that I'm thinking about it. Is it possible to make a bootable OS CD not only with SP 3 but with all the updates sense SP 3 came out on it?

Is this possible? If so, how would this be accomplished?

As always, all your help gives me a feeling of more independence.

Thanks and Happy 4th,


PS Love the fireworks display in MSN's toolbar for IE! You should check them out!

A:Slip Streaming Sp 3 Into Xp Sp 2?

Many different options for it here: http://www.google.com/search?q=slipstream+...lient=firefox-aFWIW - the other techs at work are recommending nLite for slipstreaming. They state that the problems that drove me away from it are fixed - and that it's a reliable and handy tool to use.

Read other 8 answers

Hello,I recently bought a HP Stream 13 to my daugther.Because it only has 32gb disk and 2 gigs mem, probably it would be better to have 32 bits of windows 10, but it comes with 64 bits.Is it possible to install 32 bits version, and if so where are the drivers (model 13-c103np)? Are they all present in windows yet? windows 10 64bit - takes 20 gig space and runs in 2 gig memorywindows 10 32bit - takes 16 gig space and runs in 1 gig memory(i have to have spare memory for the running apps) thank youbest regardsmynamea    

A:Is it possible to install 32bits windows 10 on stream 13?

That was discussed here for the Stream 11 which is similar to the 13.  It was discovered that there were not 32-bit drivers for all devices so 64-bit was a better choice.  It does not use much more disk space or RAM according to my tests.

Read other 1 answers

I wanted to install windows 10 on my Stream 13 (only 32 GB SSD). With the recovery partition and windows 8.1 plus all updates i was left with not nearly enough space to install Windows 10.  After a few failures I was able to make this work and this is how. My solution to the problem. This is not to say that a easier one may turn up but this is the only thing that worked for me. *Compleate a fresh recovery to create as clean of a install as posible*Install all updates*use the Media creation tool to create a USB for the instal.https://www.microsoft.com/en-us/software-download/windows10*On another USB I created a copy of the system recovery (because my goal was to delete the recovery partition after installing windows 10 and save some much needed space)*Click on the setup on the USB made from the media creation tool (dont boot in to it this time and run a full clean install or windows will not recognise your 8.1 key). follow the directions to upgrade your pc. *Somewhere here i was told that i didnt have enough space on my  computer but was given an option to select an additional drive or USB to compleate the upgrade. I used my micro SD but had the option to use a USB thumb drive as well.  Just plug one in with enough space, refresh and select the one you want.*once done I was running a upgraded version of windows 10. and all was well.  Now at this point my hardware was recognized for Windows 10 and I can reinstall all I want.*Personally at... Read more

A:How I was able to install Windows 10 on HP Stream 13 (32GB S...

Well looks as if i found a fix to the problem. Posted it all above in an edit. Hope it helps someone

Read other 10 answers

I have the same problem but with no nearer to resolving the issue, tried everything and going out my mind with it, installed windows 10 several times, installed Synaptics driver from hp website and it installs fine but won't show up in the add/remove programs or in the mouse settings

Read other answers

Despite my best efforts, I am unable to clean the C: drive (28GB!!!) of my Stream 200-009 to have enough room to operate normally.  I am now at the limit and thinking of upgrading the hard disk.  How can I do this?  Can I copy the factory-installed recovery partition on the new hard drive?  And then, how do I make the new hard drive bootable in order to re-install the OS on a boot partition?  Will I be able to recover to a new, larger hard disk from the original recovery image, or is there a "safeguard" on the recovery image to prevent re-installing on anything but the factory-installed 32GB HD?   Thanks!

Read other answers

I am having an annoying problem with my IE.I'm using IE 7 and from 4 days ago, everytime I open IE or a new tab I got the annoying stuff:Insecure Internet activity. Threat of virus attackDue to insecure Internet browsing your PC can easily get infected with viruses, worms and trojans without your knowledge, and that can lead to system slowdown, freezes and crashes.Also insecure Internet activity can result in revealing your personal information.To get full advanced real-time protection for PC and Internet activity, register KvmSecure. We recommend you to protect your PC now and continue safe Internet browsing. Click here to get full advanced real-time protection and continue browsing. Continue to this website unprotected (not recommended). I strongly believe this is merely because my IE has been infected so I did some research I was lead to this webpage http://www.bleepingcomputer.com/forums/top...tml#entry840027 which shows how to solve the problem but it requires ComboFix and I did not even know what it was so I click on a link provided on that webpage and jumped to http://www.bleepingcomputer.com/combofix/how-to-use-combofix . I clearly understand it. But to what I understood, the webpage instructing how to use combofix only shows how to install window recovery console with a CD. However, I'm using Vista Home Premium and I have not such a CD. Instead there's a driver on my computer called HP_RECOVERY (F:) which had been already installed on my laptop when I bought it. I'... Read more

Read other answers

Currently I have a pc with Windows 7 32bit installed on it. I have a disk with Windows 8.1 Pro 64 bit which I would like to dual boot with the current Windows 7 32bit . i have 2gb ram ,500gb hd 4 parttion Once I restarted my pc with the dvd in it, it asked me if I wanted to boot from Cd/DVD which I did. It then started the normal Windows setup screen. after saveral min this error show i/q error occure 0xc00000e9 what i do plz help

A:dual boot window7 bit and window8.1 64bit pro installation problem

it happened to me as well when i was trying to install Windows XP as dual boot with windows 7 home premium
i always get the blue screen due to the SATA driver that xp doe snot recognize my HD,,
but the people in the forum really do good help by pointing me to virtualize xp INSIDE W7..
IT works using VMware , why do not you use the same thing
or do you have another purpose of installing w8 as dual boot with w7

Read other 3 answers

Sigh, I guess I will start from downloading IOBIT advanced system care and then it asked me to update my driver and now I have this driver failure thing where I'm unable to login to window, I've googled so much and now I'm in need of the rescue disc file for rebooting so I can perform system restoration, but I'm unable to download it from the window official website because I don't have the registration key... it was installed for me at the shop so I never had a disc.

I've actually downloaded the disc else where and installed it onto a USB but it didn't seem to detect the USB at all, I did perform F2 , boot mode and put all my USB drives to the top as my priority, I don't know if the files were corrupted at the beginning so now I'm hoping if someone can help....

Many thanks


Read other answers