Over 1 million tech questions and answers.

Difference between 40 pin LCD connector and 40 TTL connector

Q: Difference between 40 pin LCD connector and 40 TTL connector

I am working on a project and I have a Laptop monitor here that has a 40 pin LCD connector that I am trying to convert to HDMI to plug into an xbox 360. I have gone and looked for an 40 pin LCD to HDMI converter but all I could find was an 40 pin TTL to HDMI. Will this work? https://www.adafruit.com/products/2...2KF8Y_EOnrMVziicEfgwarUPZqSbe_j7LMRoCMFXw_wcB

RELEVANCY SCORE 200
Preferred Solution: Difference between 40 pin LCD connector and 40 TTL connector

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Difference between 40 pin LCD connector and 40 TTL connector

Read other 6 answers
RELEVANCY SCORE 86

Hi. I am new to building computers and have a question on fans. My case has three fans. Two of my fans have both pin connectors and molex connector attached together. How do I power the fans ?- do I need both connections?
thanks
 

A:Fans with molex connector and pin connector

The 3pin connectors are to plug directly in to the motherboard......if your motherboard does not have the 3pin connectors then plug the molex into the power supply
 

Read other 1 answers
RELEVANCY SCORE 86

Hi there. Please view this item
http://www.newegg.com/Product/Product.aspx?Item=N82E16833127063

I am confused whether or not the antenna or cable will screw onto my wireless adapter card.

My wireless Adapter card has a SMA connector on it with the screw wedges on the outside rather than inside with a pin in the middle.

Heres a photo of a similar SMA connector - http://content.answers.com/main/content/wp/en-commons/thumb/9/90/200px-Gniazdo_RPSMA.jpg

The brand of the network adapter is the same as the brand of the antenna they are both D Link so youd think they would fit.
will the antenna or cable screw onto that?

thanks, jordan
 

Read other answers
RELEVANCY SCORE 79.2

I am wanting to install a new video card. It has a VGA and a DVI output on it. The old card has only a EVC connector on it. From there it goes to a Y cable with 2 CRT monitors (VGA connections) coming off of it.

My question is. Can I use a DVI to VGA adaptor and hook both monitors to the new video card and do away with the T cable?

Thanks Bill
 

A:Can I change from a EVC connector to a VGA connector?

Most definitely. You can down convert form DVI to VGA, but not the other way around (inexpensively, anyway)
 

Read other 1 answers
RELEVANCY SCORE 64

Windows 10 Settings have this mysterious item.

What does the App Connector do and why does it need access to my location, camera, etc....?
Thanks,
BBDS

A:What is App Connector...?

Have a look at this article. It won't answer your question though.

Source
exceprt :
Microsoft allows you to uninstall App Connector, which seems to support the idea that it doesn’t do anything super important. If uninstalling this app caused problems with Windows 10, Microsoft wouldn’t let you do it so easily.

Read other 3 answers
RELEVANCY SCORE 64

Hi, I acquired (for free) a dell Dimension E510 and it it does boot up. When I power it up, it makes a terrible beeping/whining noise and then powers down. The power indicator light starts to blink and I can't power up the computer again unless I hold the power button down for 10 seconds or I unplug the power and then push the power button again. If I disconnect the square 4 pin connector from the mobo, it does not make the beeping sound and the power indicator light stays solidly lit, Regarding the PSU 4 pin connector, I am getting 11.95 volts on each yellow wire (with a volt meter to the chassis) and (minus) - 2 volts on the black wires.
I have tried removing and replacing the cmos battery, disconnecting the modem card, hard dive. Its only when I unplug the 4-pin connector that the computer does not beep and turn off

What does the 4 pin connector supply power to?
Does it sound like the 4 pin connector is good?
Could the mobo be faulty?

Thanks, Bill
 

A:Bad PSU? What is the PSU 4-pin connector?

The 4Pin power connector powers the CPU

But it sounds as though you haven't plugged the power into the Video Card (some 3D Video cards have this, maybe yours?)
 

Read other 3 answers
RELEVANCY SCORE 64

i am using the standard ATX 20 pin power connector that i am using... and is that the new ATX12v connector the 4 pin? and do i use the new 2x2 pin along with the standard connector?
 

A:PSU connector

two1361 said:

i am using the standard ATX 20 pin power connector that i am using... and is that the new ATX12v connector the 4 pin? and do i use the new 2x2 pin along with the standard connector?Click to expand...

If your board has the 24 pin connector then use the 2x2 with it.

Yes, the square 4 pin is the 12V connector to the MOBO.
 

Read other 3 answers
RELEVANCY SCORE 64

Hi guys,:wave:

I've lost my Cellphone's USB Cable/Connector.
I want to transfer photos, videos, etc. from my CP to my PC.
Is there other way of connecting my CP to my PC?

thank you very much!

regards,
portaltreaf

Note: my cellphone is Nokia N72.
 

A:My CP's usb connector

You realize this is a computer forum don't you?

Within 7 hrs you have created 5 new threads and posted 13 posts
You certainly need a lot of help :rolleyes:

I'd say for this one, buy a new cable !
 

Read other 3 answers
RELEVANCY SCORE 64

I have a problem. I had an old PC running Win98, and the C drive went bad. I had some photos and music on another drive. I purchased a new computer, running WinXP. I also purchased one of the USB to IDE converters so I could plug the drive with the pics into my new system and recover the pics, etc. My system recognizes the drive being attached to the USB, but I can't seem to access the info on the drive. Am I missing something, or perhaps it's impossible to recover the pics since I'm now running WinXP instead of Win98? Any help would be appreciated, since I'd hate to lose the pics! Thanks,

Tom
 

A:USB to IDE connector HELP!!

Read other 14 answers
RELEVANCY SCORE 64

I have an ABIT AX5 motherboard and am running Windows 98. The keyboard connector (PS/2) no longer works. I am wondering is there and can I connect a USB keyboard and have it work? I am in stationed in (US Army)Korea and don't have access to a repair shop (and can't afford a new motherboard).

Thanks
Dave
 

A:USB connector HELP!!!

Don't know why not, there are a lot of usb keyboards available. The only down side would be no keyboard in dos mode. Windows should be fine though. Here is a list of usb keyboards etc
http://www.usbworkshop.com/products/keyboardlist/subcat0/
 

Read other 1 answers
RELEVANCY SCORE 64

Hi, I have two 7800 gt's in my motherboard. I have a Gigabyte GA-MA790X-UD4P mobo. I heard that you do not need a sli bridge connector for lower end cards.

But I boot up (both the cards are working, there fans are spinning) and the enable sli configuration box is not in nvidia control panel. Now is this because I do not have a sli bridge connector or is it possible to work without it?
 

A:Sli Connector

The 790X-UD4P doesn't support SLi, only CrossFireX. ("Ati version of SLi")
 

Read other 2 answers
RELEVANCY SCORE 64

Like many, I have CD-ROM problems, but mine is a little unusual. I have a 58x vanilla CD-ROM chained as a slave to a master Plextor 708-A DVD writer. Both are on the secondary IDE connector of an Asus P5GD1 board. This is the one with the RAID connector possibility on the secondary connector but the default on the Secondary connector is to IDE and I've left it that way. The two hard drives are chained master/slave to the primary and are working fine. Windows XP SP2, P4 3 Ghz, 1 GB RAM.

The CD-ROM shows up in Device Manager but freezes when I've tried to read a CD. The DVD writer works fine and will show anything when there is a disc in there. I've tried the usual workarounds, elminating the Upper and Lower Filters, removing the drives from Device Manager, zilch. In Event Manager, I keep showing Event 51 (paging error) and 11 (controller error) trying to use the CD-ROM. The Event 11 explanation says a "faulty cable" is the problem but I've changed cables twice.

What I'm thinking is that I currently have an 80-pin cable hooked up to the two optical drives and the Asus Secondary Connector which is made for an Ultra ATA 133/100/66 port and the motherboard asks for an Ultra ATA signal cable. Should that cable be a 40-pin connector rather than the 80-pin connector? Would that allow the CD-ROM to be read and will the DVD still work?

Thanks for any help here,

Neal Lavon
Takoma Park, MD
USA
 

A:40 vs 80-pin Connector

Read other 6 answers
RELEVANCY SCORE 64

I need some information on the pin configuration of the PS2 connector. Looking at the connector with the Large index slot at the top "12 oclock" position, counting clockwise which pin is "Data", "Gnd", "Vcc", "Clock"? I need this information so I can set up the connector to connect to the mother board. Thank You.
 

A:PS2 connector

Clockwise from the slot...

Signal: Clock Description: clock

Signal: GND Description: Gound

Signal: DATA Description: DATA

Signal: NC Description: No connection

Signal: VCC Description: +5V

Signal: NC Description: No Connection
 

Read other 2 answers
RELEVANCY SCORE 64

I have a Intel PII 350, 8.6 Gig HD and 128 MB of Ram. I am using Windows 2000 as the OS. I was trying to install a USB modem on my computer when I noticed that my USB connector wasn't installed properly. I uninstalled the hardware and re-installed it using the old and new drivers but still it wasn't working. When I went to the trouble shooting tab, it set that USB connecter not starting up. Would you be able to tell me what the problem is.
 

A:USB Connector

Enter the bios and make sure usb is enabled, quite possible it's not if your not using anyother usb devices.
 

Read other 3 answers
RELEVANCY SCORE 64

I noticed on a motherboard there was a 8pin connector but 4 were covered by a sticker...what is the 8pin for and is there a cable i can convert to a 8pin???

A:8 pin connector?

You only use it if your PSU has an 8 pin.

if you really want to use the 8pin here is an adapter,
http://www.directron.com/ad202.html

http://en.wikipedia.org/wiki/EPS12V

Read other 4 answers
RELEVANCY SCORE 64

i have recently bought a psp/tv cable so i can play things on psp on the tv. the cable has 5 connectors, 1 Blue 1 Green 1 Yellow 2 Red, which of these connectors do i use in the tv? does anyonehave any suggections
 

A:psp/tv connector

Read other 8 answers
RELEVANCY SCORE 64

Hello, I'm about to purchase a GTS450 card and noticed it required one 6 pin pci-e power connector. However I only have an 8 pin pci-e power connector. Would this still work?
 

A:6 pin pci-e connector

Might check your 8 pin connector to see if it is a 6+2.
That means that 2 pins may be removable to allow
use as a 6 pin connector.
Check the cards package content list to see if it includes
a 4 pin molex to 6 pin pci express adapter.
If not,you can buy one pretty cheap.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812887001&cm_re=molex_pci_express-_-12-887-001-_-Product
 

Read other 1 answers
RELEVANCY SCORE 64

Me bad. Bought a new cheap MB (Biostar tforce 550) which has only one IDE connector.
But I want to connect an optical drive and a spare IDE HD.
I remember that using one IDE cable for the two could cause problems, and a hit in performance.
The first I think can be corrected by putting the HD first. But how big is the performance hit?
Does it only occur when using the optical drive?
Thanks
 

A:one IDE connector.

Read other 7 answers
RELEVANCY SCORE 64

I'm going to get this heatsink:

http://www.newegg.com/Product/Product.asp?item=N82E16835109118

to cool my Pentium D 830 processor. Problem is it needs its own cooling fan and I'm going to get this one:

http://www.newegg.com/Product/Showi...eeve+Blue+LED+Light+Case+Cooling+Fan+-+Retail

But the cooling fans all have 3-pin connectors. My mobo's CPU colling fan connector is 4 pin althouth it looks like it could also take a 3 pin where one pin just wouldn't be used. Will 3 pin connectors work? What's the difference?

MOBO is ASUS P5WD2 Premium.
 

A:Will 4 pin CPU connector take 3-pin fan?

Read other 16 answers
RELEVANCY SCORE 64

I'm buying a new PC tomorrow, but I want to keep my 250GB IDE drive in addition to a 250GB SATA drive. The motherboard I'm purchasing has one IDE connector, but I have two IDE devices that I want to connect. There's the 250GB hard drive, and my DVD burner. Will that be possible using just the one connector? I'm not sure what they mean by that, since I know IDE cables sort of have two cables in one.
 

A:Can I do this with one IDE connector?

If the cable only has one connector then you can buy one with 2 connectors on it.

If they mean that you only have one IDE connector on the board then might be a little trickier.
 

Read other 3 answers
RELEVANCY SCORE 64

I am about to put together a new (simple) PC. The MB is a Biostar 6200, the processor is an AMD Sempron 2800+. The MB has a socket, which the book says allows 12v to be connected to the processor (??????). A modern PSU has such a 4 pin connector, two black, two yellow wires i.e. 12 volts. I want to use an old PSU which doesn't have the 4 pin connector. Is it necessary?
 

A:4 pin 12v PSU connector

Read other 15 answers
RELEVANCY SCORE 64

I have a question about a P10 connection on my motherboard. I bought a new power supply and the P10 connector is not the same as on the one I removed. The slot is straight with 6 pin holes. The new power supply P10 connector is square with 3 pin holes on top of 3 more. I powered up my computer and it seems fine. I would like to know if the motherboard P10 slot is necessary if you are using an AGP graphics card. Thanks
 

Read other answers
RELEVANCY SCORE 64

Does anyone know what a Y-Connector looks like? (i.e. the kind which allows you to hook up 2 computer monitors to one CPU.

For example, say there's a 3 ft. or 6 ft. Y-connector - does the split begin after 1 1/2 ft. / 3 ft. (respectively)?

I couldn't find any online diagram of same.

Thanks.
 

A:Y-Connector?

Read other 16 answers
RELEVANCY SCORE 64

well here goes...i have a compaq presario 1900xl-163..(notebook)
and i have been trying for weeks to find the interface cables that connect the dvd and floppy to the thing....
but everywhere sofar ..nothing...

the dvd and the board it attaches to are both 50 pin female.
so the cable needs to be male on both ends...
the drive is a toshiba sd-c2302.
so..if anyone has any idea where i can find this cable it will be greatly appreciated...
ps i tried every way that i know of to get one from compaq but they are very uncooperative..
 

A:dvd connector

www.pricewatch.com has every doo-dad under the sun for computers, that would be a good place to check first. Best of all, its cheap!
 

Read other 3 answers
RELEVANCY SCORE 64

Hi, I need to buy a connecting USB to connect the S140u Portable Screen to my HP Elitebook. I currently have the old connector which has two USB connectors at the end but my Elitebook doesn't have anywhere to connect the two.Any ideas if HP sell this separately - i've looked under the S140u "Accessories" section but they dont seem to sell it separately. Thanks in advance,Emma

Read other answers
RELEVANCY SCORE 64

Hi, I have purchased a OCZ Stealth Xtream 500W PSU (model: OCZ500SXS2), I have also choosen a motherboard (Gigabyte GA-890GPA-UD3H 890GX Socket AM3 HDMI DVI VGA.. | Ebuyer.com) but this motherboard has a 8 pin CPU power connector and on this PSU I only see a 4 pin CPU power connector (P3):? I need to know if I purchase this motherboard will it be able to work with the PSU and power up an AMD Phenom II X6 1075T 3GHz Socket AM3 125W 9MB Cache.. | Ebuyer.com
Also read on a website:

"You can plug a 4 pin 12V cable into an 8 pin motherboard and it will sometimes work properly but other times it won't work at all or will burn/melt the connector."

Thanks in advance for the help.

A:PSU Connector help

Take look here:

Kustom PCs 4pin P4 12v to 8pin EPS Connector



8Pin 12V to 4Pin Power Cable : Internal Case Cables : Maplin

Read other 5 answers
RELEVANCY SCORE 64

May I direct you to my post on another forum instead of reposting it all?
http://www.hardwareforums.com/what-kind-connector-lcd-controller-21858/

It seems that either no one knows or cares to reply. Just post any replies here instead of having to sign up over there. Thanks for any help!
 

A:what is this connector

I am pretty sure that would be an LVDS (Low Voltage Differential Signaling) Connector. The fourth picture is your LCD Inverter.
 

Read other 1 answers
RELEVANCY SCORE 64

Please help.
my question:While implementing any standard bus architecture like ISA ,EISA..in our own designs ,is there any standard to be followed while selecting bus Connectors (physical) or we can use any type of connector?
 

A:ISA bus connector

ISA .. WoW that brings back memories
In theory you should follow the standard set for ISA to avoid interconnectivity problems. In practice , well if the system will be used mainly by you, then it shouldn't matter since you might be able to get away from connection problems by manufacturing your own connectors
 

Read other 1 answers
RELEVANCY SCORE 64

Hi. If I would get a PS2 to USB connector for my laptop, could I just connect a keyboard or would I have to connect both a mouse and keyboard?

Thanks.
 

A:PS2 to USB Connector

You can just connect the keyboard, the laptop mouse will still function.
 

Read other 3 answers
RELEVANCY SCORE 64

I've got a Jaton brand GeForce4 TI4200 video card.
Lost the dang manual, and manufacturer's website is none-too-helpful.
Beside the blue VGA connector, there's a round connector, with 9 pins (female). It's not marked, and I initially thought it was for TV-out (S-Video), but I can't find another on the web that looks similar.

I'm hoping to use it as a TV-out, I guess I'd better figure out what it is first...
Any help will be very much appreciated.
Oh yeah, here's a link to a pic:

http://img78.photobucket.com/albums/v239/jamesl777/?action=view&current=video_card_connectors.jpg

Thanks for your time,
James
 

A:What connector is this?

Read other 8 answers
RELEVANCY SCORE 64

I have several HD's and DVD's that have been removed from computers.
I would like to connect one of the Lightscribe DVD's to a computer that has no workable internal slot to install the drive in.
Is there a cable that I could use to connect the IDE drive to a spare SATA connector and allow the drive to be used outside of the computer for writing a few discs.
I have found some plug in converters but would like to find a single plug to plug cable (plug into the back of the DVD drive and route the cable into a spare SATA slot/connection inside the computer.
I hope this makes sense and someone can point me to a solution.
Thanks.
Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Pro, 64 bit
Processor: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, Intel64 Family 6 Model 94 Stepping 3
Processor Count: 8
RAM: 16323 Mb
Graphics Card: NVIDIA GeForce GTX 960, -2048 Mb
Hard Drives: C: 1862 GB (1741 GB Free); D: 931 GB (81 GB Free); E: 3726 GB (3066 GB Free);
Motherboard: HP, 2B4B
Antivirus: Norton Security Suite, Enabled and Updated
 

Read other answers
RELEVANCY SCORE 64

Probably a simple answer I know.. PC stopped working, Checked power supply it was fine, unplugged everything except the p4 connector, still nothing. Ha unplugged the p4 connector now things come on. The question..Bad motherboard or cpu?

Thank-you in advance
 

Read other answers
RELEVANCY SCORE 63.2

I have a Dell Inspiron laptop with a 15-hole connector port and a 7-hole connector port (black). Could someone pls tell me what those connectors are for? Thanks

A:Connector ports?

Which model laptop is it? They're most likely display/communication (COM) ports.

Read other 4 answers
RELEVANCY SCORE 63.2

Hey guys had a question for you all.

First the mobo in question is a Abit NF7, a bit on the older side (which explains my problems now) but has worked perfectly for me until today.

As far as I can tell, the CPU fan connector on the MB is dead, plugging the fan into another connector works fine, plugging another fan besides the cpu fan into the cpu fan connector gives me a non working fan so it simply leads me to believe the connector on the BM itself is dead.

My question is, buying a new mobo isnt an option for me right now and I can easily plug the cpu fan into another connector to get it working but is there anyway to bypass the computer checking if the cpufan is working before booting up?

As it stands right now, the computer won't boot since it detects no CPU fan even if there is one running in another connector, can I bypass this check by any chance?
 

A:Dead CPU fan connector

generally no. You might be able to get the board repaired, but you're better off replacing it.... tough break.
 

Read other 2 answers
RELEVANCY SCORE 63.2

Hey I'm new to pc building and my friend suggested me to buy pc parts. Biig mistake lol. SO my problem is that I plug everything in to the mother board, but once I plug the cpu power connector into the mother board and power supply it starts for 5 seconds and then shuts off for a few seconds then comes back on in a loop. I did the 24 pin wire and the cpu wire only and same problem. It only works if the cpu wire isn't plugged in. Any suggestions?
 

Read other answers
RELEVANCY SCORE 63.2

Right. I bought a 120 mm fan salvaged from some old server system from my friend with a Coke. It has this funny 2-pin power connector. Any way to connect it to a MB with only 3-pin connectors free? Can I just match the 1st pins and try it out? Would this hurt my system by chance?
 

A:Solved: 2-pin fan connector

The third wire is generally for fan speed control, so it should work with 3 pin header.
 

Read other 2 answers
RELEVANCY SCORE 63.2

Hi all,
I recently installed a Zalman-VF1000 cooler:

http://www.amazon.co.uk/Zalman-VF10...?ie=UTF8&s=electronics&qid=1272212395&sr=8-11

to my 9800gt and now when i use the left dvi port i get flashing lines all over the screen. When i use the other port its fine. I suspect that port may have been damaged somehow. Are there any suggestions as to how i can fix this or do i have to get a new graphics card?
Satch
 

A:Faulty DVI connector?

Also I just had a crash while playing bf bc 2 (bad company 2) with lots of artifacts after which i had to restart. I hope i installed it correctly. The fan is working and riva tuner says its averaging 35 degrees. Also the chipset is firmly touching the heatsink base with arctic silver thermal compound on it etc. Any suggestions?
 

Read other 1 answers
RELEVANCY SCORE 63.2

ALOHA,

I have "VIVIDENCE CONNECTOR" on my computer. What is this and how can I get rid of it.

MAHALO PLENTY,

Kalikokat

A:Vividence Connector

Hi there

Please download Adaware SE and install it if you don't have it already. Make sure it's the newest version and check for any updates before running it. Go to this site to get the plug-in for fixing VX2 variants. Also make sure to customize the settings in Adaware for better scan results. Run the scan and fix everything that it finds then........................

Please go into Windows Explorer, click on C:\ > File > New Folder and call it HJK, or another name of your choice. Go to this site and download Hijack This. Install the program into the folder you created then run it. Click Scan. Save the log file to Notepad, then copy and post it back here. Make sure to include the System information at the top of the log as well.

Read other 1 answers
RELEVANCY SCORE 63.2

I got the Nintendo Wi-Fi USB connector to get wi-fi in my Wii and DSi for some pokemon games, and it used to work fine, then it started acting weird.

At first, I had it installed into my Windows XP desktop and it worked okay, other than the fact that I would have to take down my Firewall everytime I wanted to use it. THen I got a Windows Vista laptop, which I am currently using and it caused me a lot of problems.

The first time I downloaded it, it took me 2 hours before it finally worked. I don't know what I did differently for it to work, but it did, and I installed no drivers for it for windows vista, because this USB is a Windows XP device. So, I'm still confused on how it worked for a while in the first place.

Yesterday, I went to go into wi-fi on my pokemon platinum game and it said "No Access Point in Range." I knew this had to be wrong, because I had my laptop opened up and right next to me. Then I noticed that it wasn't lit up green and my laptop wasn't connecting it. So, I popped in my sofftware disk, waited for it to reinstall, and the weirdest error message popped up. "Internet Connection Sharing error. (6.)" I googled it and found multiple of the same situations. I used this site to help me out: http://techforums.nintendo.com/nins/board/message?board.id=wii_internet&thread.id=2112. I followed a few steps to different ones, and now I am getting different numbers. For example, last night I started getting "Interne... Read more

A:Nintendo Wi-Fi USB Connector

Read other 11 answers
RELEVANCY SCORE 63.2

I am trying to use a USB to PS/2 convertor for my keyboard(My mouse one isnt working to but It runs fine threw USB), so it wont be as slow, but I think I am missing all my files for the PS/2 connector, if I need files, where can I download them, if I dont need files, how do I fix the connection? The convertor is not borken.

Thank You.
 

A:PS/2 connector missing?

Read other 8 answers
RELEVANCY SCORE 63.2

hi guys,

i had a problem as my computer was switched off suddenly.after all the checkings i found that 12v atx power connector on mother board is not functioning.

case1: i tried connected both the 20pin and 12vatx pin and try switching on power nothing moves

case2: i tries connecting only 20pin on motherboard the power comes and fan on the proccesor starts moving. but if i connect both the pins on motherboard nothing is happening

so can anyone please tell me what is the problem and what i have to replace.
[/LIST]
 

A:ATX 12v power connector

you're PSU might have blown.. Replace that first.

If its a crappy generic PSU, then it could have taken more than just itself out when your power cut.
 

Read other 3 answers
RELEVANCY SCORE 63.2

Hi, I have an intel 484 socket motherboard without the video connector. How can i connect it with a monitor?
 

A:no vga connector on motherboard.

Plug a video controller card that has a VGA output into the motherboard and plug the monitor into the video controller. Exact type of controller card would depend on what kind of expansion interface types are available on the motherboard.
 

Read other 1 answers
RELEVANCY SCORE 63.2

Ug. I'm trying to set up a new motherboard in my rig, and I note that the motherboard has only 2 pins for this, wheras the case has a 3 pin connector. There's no room for the extra pin, and the 3 pin adapter is encased in hard plastic as shown. Does anyone have experience with this? What would you do?

A:Installing a 3 pin -> 2 pin connector for PWR LED

there are little tabs - locking the pins in place (they look white in your pic) lift those tabs with a needle or small pic and pull the pins out of the connector

Read other 28 answers
RELEVANCY SCORE 63.2

Yesterday my PC refused to start when I removed my graphics card - hitting the Power On button doesn't start the system running at all

So I did several things. I checked the 24 pin power connector from the PSU to the motherboard and tried to re-fit it again. I also removed the Power Switch connector that connects the switch on the front panel to the motherboard, and re-plugged it in. After that, I managed to boot up the system

I'm just asking out of curiosity, because I suspect that it could have been the loose power switch connector, but what will happen if the 24-pin connector is not plugged in properly? Will the system still start up?
 

A:Question regarding 24-pin connector

Read other 16 answers
RELEVANCY SCORE 63.2

In settings - system - apps & features - there is app connector.
What is it?
Can it be uninstalled safely?
Have you uninstallled it?

Googled a lot but not much info on app connector?

Windows 10 app connector and Windows Shell Experience

Some info here.
 

A:What is app connector in Win 10 & have you uninstalled it?

From what I read you can uninstall it and nothing adverse happens but it seems as though nobody really knows what it does,including Microsoft.Personally I would just leave it alone.
Create a restore point and uninstall it and then let us know if something bad happens
 

Read other 2 answers
RELEVANCY SCORE 63.2

Hi, during my first ever pc build, i accidentally inserted the 24 pin atx power supply connector backward. I found it out and took it out after trying for a long time cause it kinda got stuck . So now I was wondering if either the motherboard or the cable got damaged in anyway and I it?s even safe to use. I checked all the pins and they were fine and I never turned the power on , so I don?t think anything fried or something
 

Read other answers