Over 1 million tech questions and answers.

Inaccessible Boot Device on 2000 Server

Q: Inaccessible Boot Device on 2000 Server

Windows 2000 Server
Original Mother board: PIII
Replaced with PIIII board and chip.
Now it won't boot and gives the message Inaccessible Boot Device
Is this because the HAL is written to the boot sector or is the Hal info in the (HKLM Key\System\Current Control Set\Services) pointing to the the PIII board and causing the error? Does anyone know how to fix this problem. Would the command in the recovery console Fixboot help?

RELEVANCY SCORE 200
Preferred Solution: Inaccessible Boot Device on 2000 Server

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Inaccessible Boot Device on 2000 Server

It sounds like the BIOS is not directing the boot to the correct disk. I assume that nothing else has changed. Check the disk connection. Try booting with a DOS or win98 disk and run fdisk to see if the drives and partitions are viewable (don't change). If you can see the partitions as they were, you might try exiting first and run "fdisk /mbr" (no quotes) and if that is not the answer, try a repair install of 2k to see if it recognizes a previous install.

Read other 1 answers
RELEVANCY SCORE 107.6

Can I please have some ideas on how to fix this?

PiXhost - Free Image Hosting

Read other answers
RELEVANCY SCORE 92

I'm running a k62 500 and am attempting to install Win2kPro on a 3 gig partition

I started the setup in win 98 and when it rebooted i selected win 2k setup instaed of win 98 dual boot seemed to be workinhg bu whe it continues setup it tells me the boot device is innaccessible

the partition Win2kPro is on going on is 3 gigs fat32 designated d: the version of win 98 on my c: is second edition and the partition is also fat 32 it is a fujitsu hard drive and i intend to use one o when another fails since i do a great deal of experimenting and make a large number of changes on a near daily basis
 

A:[Solved] win 98/2000 pro 2000 pro setup boot device inaccessible (HELP ME)

Read other 7 answers
RELEVANCY SCORE 87.2

Hello,

For days one of our computers here at work has been acting strange....booting to windows, then rebooting. I booted to safe mode, then restarted to normal mode it seemed fine...then one day...blue screen! The error "inaccessible boot device error" comes up when windows trys to load. I can F8 to pick safe mode, but it returns to the blue screen.
Any thoughts on how I can fix this problem? I have searched for answeres but there is nothing to really grab hold of and work through.

On another note, while this first computer was out of commision I moved one of our other computers over to that workstation..and two days later it started acting funny too. No blue screen yet but did the restarting thing today and also went to a black screen with one line saying HD error. What gives?? As a side note, both computers had a automatic windows update happen recently. Also, I was wondering, could a faulty battery backup device be the cause of this? A virus?

Thanks so much for any help at all.

Monique
 

Read other answers
RELEVANCY SCORE 84.8

After an entire weekend working on this project, I am beat. I have a client who has a Windows NT Server and is replacing a 4 GB SCSI hard drive with a 20 GB IDE. System sees the new drive. I have used Ghost to create the clone of the original drive from the 4 GB SCSI to the 20 GB IDE. That worked fine. However, after removing the SCSI drive to boot from the 20 GB IDE, I repeatedly obtain the STOP: 0x0000007B INACCESSIBLE_BOOT_DEVICE. I have been in contact with Symantec and they have not been of much help. I have seen the article from Microsoft regarding the error as well but have not had much luck.

My question is by chance, has anyone else experienced a similiar situation and what has been your resolution? I would be extremely grateful to anyone who may have an answer to this problem.

Thank you for any help you may provide. I have not seen a similiar thread here on this forum of a clone from a SCSI to an IDE.
 

A:Inaccessible Boot Device after cloning a SCSI to IDE drive in NT Server with Ghost

Read other 13 answers
RELEVANCY SCORE 78.8

Need help again all on my brother in laws computer.....every time he trys to turn on computer he gets post and the windows splash screen and it acts as if it is loading and then the blue screen of death comes up and he gets a message saying STOP...inaccessible boot device.......gets same message even if you try in safe mode.....they said they first started getting this right after the computer was making a terrible noise....could this be a fried hard drive and how do I find out what it actually is....do I need to put a boot disk in and try????Whats my next step?
 

A:windows 2000 and "inaccessible boot device"

Hi itsme,

That sound could have been the hard drive.

Get right down to the drive with a paper
towel roll or something, while you're
hitting the power on button. You should
HEAR the drive starting up. If not, it's
a dead puppy.

If you DO hear it running smoothly, then
the boot sector has been corrupted. You
Might try booting with floppies - just so
you can access the C: Drive. If you can,
then run "chkdisk" on it.
 

Read other 3 answers
RELEVANCY SCORE 69.2

Hello! After yesterday (05.09.17) system update which was the only option to shut down my PC, I cannot start it. The automatic fix program said it was the error designated as Inaccessible Boot Device. I tried the system restore from two recent restore points offered by my PC. Didn't help. I tried startup repair - didn't help. System image recovery didn't work because windows couldn't find a system image on my computer. Not sure if I would like to try to reset my PC since this will bring the state when I got my PC by deleting all the software packages I installed but saving personal files. Is there any option I can fix my desktop without doing reset? Thank you.

A:Inaccessible Boot Device

Welcome to this forum. > The automatic fix program said it was the error designated as Inaccessible Boot Device. From what you write, below, it seems like that *WAS* the error, and that it *FIXED* the error, so that your boot-device (the disk-drive) once again is "bootable". > I tried the system restore from two recent restore points offered by my PC. Didn't help. Sigh.  But, it is good that it did boot from your boot-device, to get to the point where it offered this option. > I tried startup repair - didn't help. Sigh.  Did you try this repair a second or third time, to see if there were errors that were not fixed the first time? > System image recovery didn't work because windows couldn't find a system image on my computer. Sigh. > Not sure if I would like to try to reset my PC since this will bring the state when I got my PC by deleting all the software packages I installed but saving personal files. Windows 10 has a "refresh my PC" option, which they claim will reinstall Windows, without affecting your personal files and your other applications.  But, don't go there, just yet. > Is there any option I can fix my desktop without doing reset? Only a "long" path: * buy a new disk-drive;* disconnect the old disk-drive, and set it aside, for a while;* connect the new disk-drive;* reinstall Windows.  Since you have been running Windows 10, you have a "digital entitlement" ... Read more

Read other 5 answers
RELEVANCY SCORE 69.2

My X1 carbon showed me error on booting after windows update (blue page). Before that , I found no USB device while I plug the USB Storage key to the USB port.The message showed : inaccessible boot deviceI tried all options in recovery but none of them solved my problem. Please tell me how to do now?

Read other answers
RELEVANCY SCORE 69.2

Hi guys I'm getting an stop 0x00000007b, inacessible boot device error.on my windows 2000 computer. the last thing I did before I go this massege was trying to install a virtual drive with nero 6 after I rebooted the computer I recieved this blue screen error. The error is telling me that I might have a virus and that I should run my antivirus , but how do I do that if I can't boot to the computer .My antivirus is up to date and I'm running avg .
my systems specs are amd xp 2500 , 256mb , shuttel an35n ultra motherboard.
 

A:inaccessible boot device

Read other 16 answers
RELEVANCY SCORE 69.2

Hello everyone,

Under the advice of a University computer "techie" in order to fix my wireless card, he had me uninstall windows service pack 4 from my laptop. After doing so I cannot boot up windows in any mode (normal or safe mode) and I have already completed a system repair using the window's disc. These steps have been to no avail .

Full error message is below.
*** STOP : )x0000007B ()xEB82784C, 0xC00000034, )x00000000, )x00000000) INACCESSIBLE_BOOT_DEVICE

System specs are.
Dell Lattitude C640
1.8 Mhz Pentium 4
512 MB Ram
40GB IBM harddrive
Windows 2000

Any help is more than welcome!
 

A:Inaccessible Boot Device

savemeplz said:

Hello everyone,

Under the advice of a University computer "techie" in order to fix my wireless card, he had me uninstall windows service pack 4 from my laptop. After doing so I cannot boot up windows in any mode (normal or safe mode) and I have already completed a system repair using the window's disc. These steps have been to no avail .

Full error message is below.
*** STOP : )x0000007B ()xEB82784C, 0xC00000034, )x00000000, )x00000000) INACCESSIBLE_BOOT_DEVICE

System specs are.
Dell Lattitude C640
1.8 Mhz Pentium 4
512 MB Ram
40GB IBM harddrive
Windows 2000

Any help is more than welcome!Click to expand...
Welcome to the forums

one option since this a dell is to call tech support and get their help. it is a dell and everyone raves about dells tech support - so make sure to let us know how good they are. Dell also has a great feature in that you can restore it to its bought condition. Again, you have to get dell support to do this. if you have data you want to save, you lose that however. dell should be able to help you access your bios and make sure the boot device is turned on...doc
 

Read other 1 answers
RELEVANCY SCORE 69.2

Not able to boot to windows 10.

Bcdedit returns:
The boot configuration data store could not be opened.
The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.

Bootrec /Scanos returned:
Total identified windows installations: 0

Bootrec /fixboot:
The system cannot find the file specified.
Please help!!
 

Read other answers
RELEVANCY SCORE 69.2

I've been hvaing problems recently with a hard-drive. It no longer boots and gives me this message:

Stop:0x0000007B (0xEB41B84c, 0xC0000034, 0x00000000, 0x00000000) Inaccessible_Boot_Device

I've tried looking this up at the Microsoft site, and it's not very enlightening I've also run AVBoot, but it didn't find anything wrong. Does anyone have any suggestions as to what this problem might be, and if it's at all fixable?

Thanks!
 

A:'Inaccessible Boot Device'

Read other 11 answers
RELEVANCY SCORE 69.2

Installed 8.1 upgrade from 8.0. Now have inaccessible boot device blue screen. I can't run chkdsk /f becase I get a write only  rejection. Is there a program I can use ?
 

A:inaccessible boot device

How did you do the upgrade?  With a disk or downloaded or ??  You can try booting off the windows disc and choosing the option to repair windows installation.  It sounds to me like you have a corrupt driver.

Read other 2 answers
RELEVANCY SCORE 69.2

I am working on getting our Windows 8 image working for an upcoming deployment. I am running into an issue when deploying to the Dell Optiplex 745. I am deploying via PXE and MDT/WDS. This method deploys fine to our DakTech models and even our Lenovo T60 laptops. I can install from the DVD just fine on the machine. I have extracted the drivers from the ?reference machine? and added them to my deployment share. I have still receiving the ?error inaccessible boot device.? This image is from the DVD not a custom image, but I have tried a custom image from my reference machine with no luck. I have also tried both the normal and the legacy settings for SATA operation in the BIOS. I have since run across this issue with a Lenovo desktop as well.

Read other answers
RELEVANCY SCORE 69.2

I'm trying to install windows 2k on this pc and it's giving an inaccessible boot device error(code 0x0000007B)

the real problem is that there shouldn't be a problem.
I resized my main partition to make 2gb of unallocated space.
I partitioned and formatted the space as NTFS
I can access it from vista and move files freely into and out of it,
but when I try to install win 2k it gives a bluescreen error after loading its components.

I'm trying to put 2k on so I can play metal fatigue, system shock, and other old games.

I'm confused as to how there is any error at all.
 

A:Inaccessible boot device

After researching and tinkering, i have found out that i need to get the SATA controller drivers for my motherboard. I have a Dell XPS 410 but i can't manage to find anything useful on the dell site, I need to know where I can find a SATA controller driver. HDD is a WDC WD5000AAKS in case you need to know.

I don't have a motherboard disk and I don't have the Dell drivers and utilities disk, which probably wouldn't have it anyway.
 

Read other 3 answers
RELEVANCY SCORE 69.2

can someone just tell me how to get out the cycle this error msg shows it says error detected will restart computer for me and then it just keeps going in that cycle. I just need to be able to boot from usb or something please help
 

A:inaccessible boot device

Read other 7 answers
RELEVANCY SCORE 69.2

Ive had a blue screen appear when i try to start-up windows XP. It says that there has been an error and that windows has shut down to prevent problems.
It didnt disappear so i was forced to reboot windows, that is now in a new partition with little space, the old drive is still there, but still shows the blue screen when i try to start it up.
I am looking to fix this error but have no real idea what the problem with it is. I am a reasonably good novice with pc's and have tried running both 'chkdsk' and 'fixboot' with the Windows recovery centre, both to no avail.

Any help on this matter would be nice, and anyone who knows how to fix it would be greatly received.

The full Technical Information on the message reads:
*** STOP: 0x0000007B (0xFA2C7640, 0xC0000034, 0x00000000, 0x00000000)

I am running a computer with: AMD Athlon XP 2400+ 2ghz, 224mb RAM.

Please ask for anything else you may need to know, but as i say i am quite a novice. Please help.

A:'Inaccessible Boot Device' - Help!

hmmm......have you checked the hdd for any errors. if your internet is working fine, i recommend going to the manufacturer's website of your hdd and download their diagnostics utility.

then boot up with it, follow the on-screen instructions, and test your hdd for any errors.

Read other 5 answers
RELEVANCY SCORE 69.2

Signed up for DSL. Got the modem and the installation disk. Started through the process. Stopped me and said I didn't have an ethernet card, which I do, but had previous problems so maybe it was uninstalled.

Went out and bought a new ethernet card. Installed in an open PCI slot. Tried to install the drivers off the floppy provided. Got error message that inf file did not match the one specified. Took the card out; took out the old ethernet card; put the new one in that slot; tried again. Same error message.

In the meantime, my 5-year-old turned off the power source while the computer was on. When I tried to power up again, I got the following error message: ***STOP: 0x0000007B (0xF081B84C, 0xC0000034, 0x00000000, 0x00000000) INACCESSIBLE_BOOT_DEVICE.

I am using Windows 2000 Professional, installed on my home computer by the IT guy at work, who now does not have time to try to fix it.

I unplugged the hard drive, took out the new ethernet card, turned on the computer again, but I keep getting the same message.

Keeping in mind that I'm not very computer literate, can someone walk me through the steps I need to do to get the darn thing to work again?????
 

Read other answers
RELEVANCY SCORE 69.2

I'm usins ASUS X540S laptop.it has windows 10 and i tried to reset it but after completion 100% resetting it is appearing "Your pc is running into problem, we'll restart it for u" inaccessible boot device.
And then it restarts and repeat same thing.
I called to asus helpline and they told u have BIOS related problem but they didn't solved it plz help.
 

Read other answers
RELEVANCY SCORE 69.2

My MOBO went out and I had to replace it.. After I finished, the Windows2000 splash screen came up for about 2 seconds then I got the "Blue Screen Error" "Inaccessible_Boot_Device".. I tried booting with the w2k installation cd <no luck, same thing happened>.. Was going to try to boot using the MSDOS boot disk <but lost the darn disk>

Anyone know what the heck I can do short of Deleting my Hard drive??

Please keep in mind I have limited funds..
Thank you,
Barb
 

A:inaccessible boot device

Read other 7 answers
RELEVANCY SCORE 68.4

I'm in a quandry here and can't figure out how to get out. I was reinstalling my HP scanner software when a stop error screen came up during reboot. I tried restarting and I keep coming back to the same screen. I tried booting from my Norton Antivirus Emergency Boot Disk and keep getting stuck at the same screen. I tried going into safe mode with command prompt and still come to the same screen. I checked the connections on the back of the computer and have unplugged the scanner. Still no luck.

Here's what the screen says:
_______________________________________________________

***STOP: 0x0000007b (0xEB81B84C, 0xCOOOOOOE, 0x00000000, 0x00000000)
INACCESSIBLE_BOOT_DEVICE

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

Refer to your Getting Started manual for more information on troubleshooting errors.
____________________________________________________

Where do I go from here?
 

A:Can't Reboot - Inaccessible Boot Device

I'm runing a Windows 2000 Professional with 512 RAM, 20GB HD, and a Pentium 3.
 

Read other 2 answers
RELEVANCY SCORE 68.4

I had a problem where my XPS 8900 would not power on. I sent it back to Dell for repair. To protect my private data, I removed the hard drive before sending it back. Dell replaced the processor and shipped it back to me. I put the hard drive back and powered the PC on. Now I get the Inaccessible_Boot_Device error.
I tried the following:
1. Swapped in a different SATA cable.
2. Plugged the SATA cable into a different port in the motherboard.
3. Checked the drive for errors and didn't find any.
4. Restored a system image to the drive.
I have another hard drive sitting around and my next step is to install Windows 10 on it to see if it will boot.
Is it possible that the Dell tech changed some BIOS boot settings and I just need to set them back? What settings should I check?

A:XPS 8900 - Inaccessible Boot Device

SATA operation changing from INTEL Rapid Start or AHCI  or ATA.
However it could also be physically damaged.
STOP 0x0000007B INACCESSABLE_BOOT_DEVICE is not the same as STOP 0x00000024 or STOP 0x000000CA
 

Read other 1 answers
RELEVANCY SCORE 68.4

What can be done to make a system workable again after getting the following message: "STOP 0x0000007B Inaccessible_Boot_Device.?

The system was just powered off for the weekend and powered on Monday morning.

Need Help Desperately..

Bob
 

A:Inaccessible Boot Device - NT40 SP6

Read other 9 answers
RELEVANCY SCORE 68.4

hi I have been trying to install XP 64 bit on a partition on my laptop and half way through i get a blue screen: 0x0000007B inaccessible boot device and this is quite frustrating because i can install XP 32 bit successfully but not 64bit.

A:XP 64 bit 0x0000007B inaccessible boot device

When you power on your computer, look for a message telling you which key to press to enter your BIOS Setup - usually Delete or F2. Go into setup and change the hard drive setup from SATA to something like Compatible Mode or IDE Mode. The description varies. After you get Windows installed you'll have to update all your chipset drivers then change the hard drive access mode back to SATA.

Read other 6 answers
RELEVANCY SCORE 68.4

Hey guys,
I am new to this so please go easy on me. My so bought a used computer some time ago. He jammed the mouse wire behind his desk and severed the wire while running his computer. No need to say it shorted out his motherboard. I had another motherboard on hand that had the same 370 socket and it fit right into his mini tower. But now comes the thing. I installed the board and hooked up all the drives, hoping that it will start right up. Bad news. Blue screen. Inaccessible boot device. How can I get back into that hard drive without deleting everything thats on it. I hope someone can help me here. Thank you
 

A:inaccessible boot device win2k

Read other 16 answers
RELEVANCY SCORE 68.4

Have a 2K prof machine, with all the Service packs installed, and NAV running. Ran fine yesertday, and for quite some time. Today, It crashes with the fatal blue screen

STOP: 0x00000078b (0x814725b0, ....... ...... Ect...
inaccessible_boot_device

It gets past post, then jumps into starting windows 2000 prof. screen. 1/2 way through, it crashes.

I've tried to boot into safe, last known good boot, etc... All crash.

Any ideas?
 

A:Solved: Inaccessible Boot Device

Read other 7 answers
RELEVANCY SCORE 68.4

I have a refurbished computer, no win2000 disk or boot disk.. I need help... I would also like tp purchase a new system, but I do not want Vista.. ny suggestions? Thanks, Edie
 

Read other answers
RELEVANCY SCORE 68.4

I am running 2000 pro and every time I try to put sp1 or sp2 on the computer it comes up with an inaccessible boot device message. I tried the recovery disk, console but everytime I end up haveing to reload windows on my system. The whole 30 gig drive is formatted as ntfs and split into two partitions. Windows 2000 pro is loaded into the first partition.

I have tried everything I could think of so any suggestions would be appreciated.
 

A:Inaccessible boot device message.

Hi Desperado83, welcome to TSG - we might be able to help you. It would help us if you would post the exact error message you are getting.
 

Read other 2 answers
RELEVANCY SCORE 68.4

I was working on my computer, Windows 2000 Pro. - I was moving my foot under the desk and accidentally switched off the surge protector.

I turned the protector back on and restarted my computer. I get a royal blue screen that says Stop Error.... "Inaccessible Boot Device"

None of the F8 options work for restart, they all say the same thing. I really don't want to have to reformat... Can someone please help ASAP?

Thanks!
 

A:Inaccessible Boot Device - HELP! URGENT!

Read other 8 answers
RELEVANCY SCORE 68.4

My laptop model no. Hp pavallion 15e039tx. Blue screen show and wrtten show STOPCODE INACCESSIBLE BOOT DEVICE .please solve my problem soon...

A:stopcode inaccessible boot device

 Perform a hard drive diagnostic testRun the Hard Drive Test in HP Advanced System Diagnostics using the steps in this section. The test might take 60 minutes or more to complete, depending on the size of the drive and the extent of the problems.Turn on the computer and immediately press the esc key repeatedly, about once every second, to display the Startup Menu.Press the F2 key to open System Diagnostics.Figure : System DiagnosticsOn the HP Advanced System Diagnostics screen, click Hard Disk Test.Figure : Hard Disk TestClick Start Hard Drive Test.Figure : Start Hard Drive TestWait for the diagnostic test to complete. The test progress screen shows the estimated time remaining.Figure : Hard Disk Test ProgressWhen the test is complete, the results display on your screen.  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

Read other 1 answers
RELEVANCY SCORE 68.4

I just replaced my P11 450 with a gigabyte mb and a P4 1.8. While initially all looked well, during the boot into Windows 2000 that wonderful blue screen with tons of words, among them, inaccessible boot device.....check your hard drive...blah, blah, blah came up. The only difference between the new configuration and the old is the MB and processor. What stupid thing did I miss? I'm guessing that there may be something in the BIOS that I've misset. Help!!

Pat
 

A:[Solved] Inaccessible boot device

You will have to reinstall Windows. It does not like you changing the hardware, which includes BIOS and CPU. The reason is Windows create a Hardware Application Layer (HAL) to separate the OS from the hardware when installed.
 

Read other 3 answers
RELEVANCY SCORE 68.4

Been working on this for weeks to no avail. I have Win 7 on on ssd and Win 10 on another ssd. I am not dual booting but switch to the drive I need in the bios. Using Casper 8.0, I clone the Win 7 and Win 10 to backup internal ssds. These internal backup drives have no issues booting. I also clone the Win 7 and Win 10 to LaCie usb3 thunderbolt ssd drives. This is where the problem starts
The Win7 has no issues creating a bootable usb3 backup.
The Win10 will not create a bootable usb3 backup.
When trying to boot to the Win10 usb3 drive, I get the "inaccessible boot device" error then a restart.
I have tried just about everything I can find but nothing fixes the issue.
Any suggestions?
Ron

Read other answers
RELEVANCY SCORE 68.4

I'm running Windows 10 64 bit without any problem. Dual core cpu 3 gb ram gigabyte motherboard. 320 gb sata hdd. Everything's okay until i connect an additional 160 gb sata hdd from another computer.

What happened:
1. When i connected 160 gb sata hdd, it booted XP os. I know that bios recognized it as the first boot device.
2. I changed the boot order where my windows 10 installation is present.
3. BSOD with a message inaccessible boot device.
4. When i remove that 160 gb hdd, windows 10 boots like nothing has happened before.

What i did:
1. Booted live ubuntu and deleted partitions on 160 gb hdd from disk utility menu. It has some extended partitions which I'm going to delete as my pwfree_64.iso gets in my bootable usb flash drive.


What i want:
I want that 160 gb hdd fully formatted connected to my computer without any boot errors.

Please help me. I've encountered this issue for the first time in my life.

A:Inaccessible boot device error

Still seems like bios is the problem. Do you have a BIOS that supports both Legacy and UEFI booting? You might have changed the boot priority for Legacy but not for UEFI. Is there an option to enter the manual boot menu screen? On my laptop it is F9, on my desktop it is F11. Try entering the manual boot menu and see what the options are for booting, that will help tell you what to set as the priority device. Also, make sure the SSD is connected to the first SATA port on the motherboard, then I like to do CD/DVD drives next, then storage hard drives.

Also, post a complete disk management screenshot and that will help us:
Disk Management - How to Post a Screenshot of - Windows 10 Forums

Read other answers
RELEVANCY SCORE 68.4

Hi

Windows 2000 pro
Last night when l was running out of my office l was in a real hurry to catch a train and when l tried to shut dowm my IBM Thinkpad 650x it froze so l manually shut it down but when l tried to start it up again this morning l saw the following;

*** STOP: 0x0000007B (ox81423030, )xc0000032, oxc000032, ox0000000, 0x0000000)
Inaccessible boot device.

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated, run CHKDSK/F to check for hard drive corruption, and then restart your computer.
How can l check my computer for a viruse if l can't get into it??

What did l do this time and how can l fix it?

Thanks

Alan
 

A:inaccessible boot device screen???

More than likely it's not a virus. Most often than not, this is caused by a bad hard drive. I would replace the drive.
 

Read other 2 answers
RELEVANCY SCORE 68.4

Hi, I started having the Inaccessible Boot Device error after I installed a new memory RAM on my laptop ASUS x501A running Windows 10. After installation, I got a BSOD but windows was able to boot after restart. Everything worked fine. I installed new software after that (Spybot and another one that disable bad startup registry-can't recall the name of that one). Everything worked fine until the PC froze. I left it for 5 minutes, but it was still frozen. I had to turn it off (pushing the power button) then on. Here is where I got the inaccessible boot device screen and tried everything suggested on the web with no luck. Reinstalled my old RAM, running automatic repair, modifying BIOS, Chkdsk, SFC, downloaded windows 10 installation on a USB flash drive, and many more.
1. I can't boot into safe mode (I get the same BSOD after selecting safe mode option#4)
2. I can access CMD. From CMD I ran notepad and then tried to open a new file (to check if the HHD is readable); I was able to see all my files and the windows files, and I am able to create/copy/paste files through notepad's [open-file] window. However I am getting really frustrated with this issue. I have a lot of programs installed and don't want to try a clean install.
Any help would be appreciated...
Thank you in advance.
MA

Read other answers
RELEVANCY SCORE 67.6

I bought a lenovo yoga 510, after a set of updates were installed, I got inaccessible boot device problem.  I downloaded the recovery media by following all the instructions, but the laptop stucks on this screen any suggestions


























20170824_100439_HDR-1.jpg ?1207 KB

Read other answers
RELEVANCY SCORE 67.6

Hey,

I need some help fast please. I recently booted up my gaming rig after swapping out a 7970 graphics card and upon system boot up, as the windows 7 logo appeared the system crashes and a BSOD appears for a split millisecond and I'm asked to start up repair windows or start windows normally however when I click start up repair a black error screen appears with the following message and error: The boot selection failed because a device is inaccessible error state and an error code:0xc000000e. Now of fixed this before multiple times except this instance nothing seems to work Ive tried the following:

- check for any unplugged or loose cables
- Re installed my ram
- Booted with on board graphics
- unplugged all usb devices and external devices with the exception of the keyboard and mouse
- Booted with system installation disc and attempted system repair several times only with the same outcome of wanting to restore from a previous system restoration point however it always fails
- changed the boot type to IDE which made the system boot furhter past the logo screen however it still crashes with the same error
- From the system installation disc I ran a chkdsk /f and no corruptions or bad sectors were found

However, I did run from the installation disc a "bcdedit" and my osdevice was unkown and my boot manager and boot loader were set to two different drives on being D: and the other being C:. So I re-linked all three back to the D: drive as the windows... Read more

A:The boot selection failed because a device is inaccessible

Hi, Welcome to Seven forums.

Check out this thread. Post # 20 have the solution.

That might also help you.

Read other 1 answers
RELEVANCY SCORE 67.6

I have a computer I built myself and one day I was running it and chrome seemed to keep inexplicably closing without warning. I decided to restart my computer on when I booted it up it hit the Windows 8 logo on black background with the white circles, waited a little, then went straight to BSOD with the error: INACCESSIBLE_BOOT_DEVICE. I've tried the multiple options in the recovery advanced options, and I made a recovery media from a laptop i have, but when I tried to use it said "The media inserted is not valid". I'm not quite sure what to do. I may open it up to see if there's a loose connection or something. Please help.

A:BSOD on startup. Inaccessible boot device

Definitely check your connections, specially the hard drive SATA data cable.
To be sure, you can swap the HDD data cable with the DVD.

Read other 11 answers
RELEVANCY SCORE 67.6

Hi i am getting this error upon start since yesterday. Basically i am unable to boot further DELL LOGO. Getting the message "YOUR PC RAN INTO A PROBLEM AND NEEDS TO RESTART. WE'LL RESTART FOR YOU" The same comes upon every restart and getting stop code: Inaccessible Boot Device.
Currently using DELL INSPIRON 3647. Kindly help

Read other answers
RELEVANCY SCORE 67.6

I bought a new laptop and in order to move my data to it, I took out the hard drive of my old laptop and hooked it up to a SATA device. After that, I put it back in the old laptop. When I turned it on, it would not boot because of the device (hard drive) being inaccessible with an error code 0xc000000e.

I do not have the Windows installation CD to run the repair, I ran a BIOS diagnostic and it found nothing, the boot order in BIOS is correct. Any further ideas?

A:Boot selection failed because of inaccessible device

What OS is on each machine?

If they're both Win7 64-bit then create a system repair disc on the working machine and boot the other using that disc and select repair from the menu.

If they're different, you could try downloading the ISO here. Be sure to select the correct bitwise ISO (32-bit or 64-bit) and then create a system repair boot disc.

Then follow this tutorial: Startup Repair

Read other 1 answers
RELEVANCY SCORE 67.6

hi,

please help me; i replaced my RAM which worked ok until i put back the cover and move the pc back in place, then it gives me a bsod
"stop:0x0000007B (0x84DAD870,0xc0000032,
inaccessible boot device"

after rebooting, it still gives me the same bsod screen; it happens after the windows 2000 splash screen

i can't boot into safe mode either (same bsod message)

i can boot with a win2k boot cd but i dont know what i can do with it; i can get to the dos prompt but when i do a dir c:, it lists contents of another HD (not the main primary partition); it doesnt see any other partitions from the dos prompt

i have 5 HD on this computer, and am on windows 2000 pro

i dont know what the next step to figure out the problem is.

Thank you very much.
 

A:please help with bsod (inaccessible boot device"

check these links

http://support.microsoft.com/default.aspx?scid=kb;en-us;324103

http://support.microsoft.com/defaul...port/kb/articles/Q122/9/26.ASP&NoWebContent=1

http://www.jsiinc.com/SUBL/tip5500/rh5534.htm

http://www.experts-exchange.com/Operating_Systems/Win2000/Q_20637525.html
 

Read other 1 answers
RELEVANCY SCORE 67.6

re installed windows 7 from hidden partition. Now when I go to boot up computer I get black screen that says:
WIndows failed to start. A recent hardware or software change might be the cause. Etc.
Status: 0xsc000000f
Info The boot selection faile because a required device is inaccessible.
I tried using dos to fix using bootrec /fixmbr and bootrec /fixboot and it says that the repair was successful. It will then boot up fine and work. But the next time I have to reboot it fails to start and I have to do it all over again.
Any help would be appreciated!

A:Boot selection failed device inaccessible

It's not a win7 problem, it's a boot manager problem. Next time do only bootrec /fixmbr or bootrec /fixboot . I want to know which of the two command did fix it.

In that recovery DOS screen:

Code:
bcdedit /enum all
any lines with "unknown" in text? Most likely osdevice or device lines.

Read other 2 answers
RELEVANCY SCORE 67.6

My desktop computer was struck by lightning last month and every since then, it's been on a blue screen loop whenever I start up the computer. It gives me the Inaccessible Boot Device error. None of the troubleshooting solutions work (system restore, system image recovery, system repair, UEFI firmware settings, go back to the previous version) nothing works. The drive is fried. The drive was even switched from C: to X:

I was told by tech support that it's not damaged severely because it's still able to turn on and boot up. but I would need to reinstall windows completely. They offered to sell me the recovery disk but I am looking for another option.

I have downloaded Windows 10 to my flash drive and tried to boot Windows that way but when I got to the stage "Where do you want to install Windows?". The box is empty and I clicked load driver, the USB drive showed up on the list under Browse but I kept getting an error saying "No signed device drivers were found. Make sure that the installation media contains the correct drivers..." when I clicked USB Drive (C, ESD-USB (D and Boot (X

I went to HP's website to download the storage drivers for my desktop on my flash drive thinking that would do the trick but that did not help.

I have no clue what I'm doing and I'm basically taking bits and pieces of information from the internet to try to come up with a solution but the frustration has set in because I had my computer set up to... Read more

A:Inaccessible Boot Device - Blue Screen

You appear to actually have a HP 251-a123w Desktop PC (N0B07AA).
It was introduced in September 2015 in the U.S.A. and came with Windows 10 Home 64-bit.
What's the exact serial number and product number on yours?

If you go HERE and follow the instructions, you can purchase a USB recovery media kit for it.
Using it will revert that desktop back to its original new condition, along with all the drivers, programs, etc. that came in it.

If you go HERE, you can download the Media Creation Tool, then use it to download Windows 10 Home 64-bit, then create a bootable USB thumb drive or bootable DVD.
Using it will install Windows 10 Home 64-bit, but you then will need to install the needed drivers and programs afterwards.

You admit to not being computer-knowledgeable, so you'll probably need someone who is to help you.

--------------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 67.6

I installed Win 7 on another SSD and it works fine. But my old SSD can't seem to boot win 7.

The SSD is fine, I can see the files. GParted marked the main 'partition' as boot.

The repairing of it says something about missing partitions and trying to fix it. Though that didn't seem to work.

I've also noticed that along with main partition the System Reserved partition decided to show itself, not sure if that's related. Also, in Diskpart, there doesn't seem to be a name assigned to the volume, not sure if that plays a part too.
 

Read other answers
RELEVANCY SCORE 67.6

If I ever just upgraded someones computer with no snages, I might have a heartatack....

266Mhz system, with Win2000 pro on board, I upgraded MotherBoard and Chip (went to MSI K7t turbo 2 and a AMD XP2000+ !) new vga card and thats pretty much it. Same config and cards and all.

It fired up with old motherboard, now with new one it goes through INITIAL Windows progress bar, THEN Win 2000 Spalsh screen that says "Starting Up" at bottom, gets 3/4 through and I get this!

***Stop: --(bunch of numbers-lemme know if you need these--
Innaccesible_Boot_Device

If this is the first time you have seen this stop error screen, restart your computer. If this screen appeats again, follow these steps.

Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run chkdsk /f to make sure it is not corrupted and then restart your computer.

Refer to manual for more info on stop screens....
Well I cant get it to let me in on safe mode, I get same screen,,, and I cant get to a command prompt, same screen again!
ANY HELP????

Is there someplace I can download startup disk files? (If I had win2000 startup disk I could get to command prompt right, win 98 startup would not help would it -- or is chkdsk command same on all OS's)

Thanks so much for any and all help~
tvance
 

A:win2000 upgrade --Inaccessible boot device

Read other 9 answers
RELEVANCY SCORE 67.6

Can't access pc after changing to windows 10. Can't get anything except a blue screen and constantly recycling 'inaccessible boot device' and we'll restart for you. Took several hours downloading osl (or whatever) on my laptop and; put it on usb and tried that in my desktop but that was no good either. Also tried original windows 7 disc and a boot disc that I bought and also the backup discs none of which have any affect. I can't afford a new pc on my pension and I can't afford to take it to a mechanic. Any clues anybody?
 

Read other answers