Over 1 million tech questions and answers.

Fan Error - Thinpad T61

Q: Fan Error - Thinpad T61

My ThinkpadT61 keeps displaying the fan error. The system boots up afer pressing ESC multiple times. What happens now is the syste, shuts down all of a sudden while I am working with it.I have decided to replace the fan myself. Was trying to find the part# but was not sure which one to order.Laptop Type - 7658CTOThe part numbers I found online were 44C0825 & 42W2460. Not sure which part is the correct one. Can someone please help with the correct part# ?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Fan Error - Thinpad T61

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 47.2

I bought this laptop used, and did not work. To test the operation I entered the Linux cd Lubit and the thinkpad a31 work properly, the only problem is not installed because he had no hdd. So I installed without updating bios and hdd upgrade has failed. Now I added hdd and the computer says "BOOTMGR is missing Press Ctrl + Alt + Del to restart" how do I restore?

A:Thinpad A 31

Welcome to the forum!
 
My guess is that you're looking at a blank hard drive with no operating system installed.

Read other 7 answers
RELEVANCY SCORE 46.4

The computer will not boot. When I run the test I get DEV 086 ERR 22 FRU 0010 on the SystemBoard test. What does this mean. Does this mean I need a new SystemBoard
 

Read other answers
RELEVANCY SCORE 46

Hello,Can you tell me how much of ram support the laptop PC x250 ref:20CLS79700 of lenovo and which are the frequencies supported.What is the spec of this memory ?Thanks

Read other answers
RELEVANCY SCORE 45.6

USB ports not working Thinpad 18 58 69g


Running XP
x64

Can someone sort drivers for me to get USB ports back running?


Would be appreciated.
 

Read other answers
RELEVANCY SCORE 45.6

I doubt there are any fixes and these are mostly observations, but here goes: 1. The other day, I had screen flashes for a couple hours in the middle of the day. I was battery for extended time, but not doing anything video intensive - taking notes with onenote in laptop mode. The screen would flash with random frequency, and made it almost unusuble, but then would stop for a few minutes and start again. It finally stopped, but i never found a cause. I did disable the WIndows error reporting, made sure i had the latest driver (mine is slightly newer then what lenovo system wants to download) -  2. Video resolution when used with external monitor - I have an external monitor above the laptop - leaving the laptop at recommended 2560 x 1440 and size at 200% (recommended) makes the laptop 2x as big as the monitor above it in the extended desktop layout - this causes issues moving the mouse between the 2 as the monitor is 2x the size of the lptop. (Driver 21.20.16.4678) 3. Dragging windows from this 200% display to  my external monitor causes some 200% sized artifacts until the entirewindow is moved. 4. I use synergy to share mouse and keyboard between my Macbook and this - the mouse hits an artificial wall near the laptop right side - i believe it has to do with the display scaling 5. Reducing the lapop to 1280 x 720 at 100% solves all the above issues, but then text is not crisp in Outlook app. Most other apps look fine, as does windows it... Read more

Read other answers
RELEVANCY SCORE 45.6

Hello everyone,My Thinkpad T450s under w7 Pro worked perfectly and I wanted to switch it to w10 by reformatting to make a clean installation.After the install, w10 works perfectly and I wanted to enter the Bios by F2, it does not open anymore.Same for the boot menu by F12, it does not open anymore.I tried also by the recovery, there instead of the Bios I'm entitled to all other starts.I can not boot on usb stick it is impossible to stay in the state.cordially

A:No access to bios Thinpad T450s

Hi,
 
Are you trying those keys on startup or on restart?  If you've only tried on startup,  try on restart - or on startup after a full shutdown (SHIFT + shut down).
 
You could also try the advanced startup options from within windows.
 
Z.

Read other 1 answers
RELEVANCY SCORE 45.6

I doubt there are any fixes and these are mostly observations, but here goes: 1. The other day, I had screen flashes for a couple hours in the middle of the day. I was battery for extended time, but not doing anything video intensive - taking notes with onenote in laptop mode. The screen would flash with random frequency, and made it almost unusuble, but then would stop for a few minutes and start again. It finally stopped, but i never found a cause. I did disable the WIndows error reporting, made sure i had the latest driver (mine is slightly newer then what lenovo system wants to download) -  2. Video resolution when used with external monitor - I have an external monitor above the laptop - leaving the laptop at recommended 2560 x 1440 and size at 200% (recommended) makes the laptop 2x as big as the monitor above it in the extended desktop layout - this causes issues moving the mouse between the 2 as the monitor is 2x the size of the lptop. (Driver 21.20.16.4678) 3. Dragging windows from this 200% display to  my external monitor causes some 200% sized artifacts until the entirewindow is moved. 4. I use synergy to share mouse and keyboard between my Macbook and this - the mouse hits an artificial wall near the laptop right side - i believe it has to do with the display scaling 5. Reducing the lapop to 1280 x 720 at 100% solves all the above issues, but then text is not crisp in Outlook app. Most other apps look fine, as does windows it... Read more

Read other answers
RELEVANCY SCORE 45.6

Hello. I recently installed a Samsung 950 Pro in the P50.After some problems during the installation it seems to work fine, but.... The 950 pro supports AES Hardware encryption (Advanced Encryption Standard, Class0 SED).I also was able to use it with a normal SSD before. After I installed the 950 NVMe, the option for setting a harddrive Password inside the BIOS just vanished.  am not able to set any harddrive passwort and thus use encryption. Every other PW seems to work fine...I would like to ask why that happened there and I hope that some of you may be able to help me with that. Thank you very much,Greetz










Solved!
Go to Solution.

A:Thinpad P50, Samsung 950 pro and password security

While 950 Pro presumably supports AES on hardware level (i.e. all data is encrypted prior being written on the flash chips), key management is still "to be supported by FW update" ( http://www.samsung.com/global/business/semiconductor/minisite/SSD/global/html/ssd950pro/specificatio... ) If you want to encrypt your 950Pro, use Bitlocker or other third-party encryption solution. There is a performance and SSD wear cost associated with that, but it's negligible for most applications.

Read other 3 answers
RELEVANCY SCORE 45.2

Imaged Lenovo Thinkpad X270 with Win 7 but get'Starting Windows' then 'BSOD Stop: 0x0000007B' error in continuous loop.Presume this model supports W7 as drivers are available.Have seen a suggestion to change BIOS Serial ATA setting but this is not available in this BIOS.Have upgraded to latest BIOS.Can image with Win10 no problem.Any help appreciated. Thanks Mike

Read other answers
RELEVANCY SCORE 45.2

Hello, My Thinkpad Yoga (model year 2014-2015) gives sometimes a white screen by startup, or after a softclose (for example when turn over from laptop to tablet mode). When I open and close my screen after a couple of times the screen is ok and I can work with it. I called Lenovo support because I think it is something with the connector from the screen to the motherboard. The computer was 2 months out of warranty so they say that I could send it to support for a check, what will cost me a lot of money for only analyse the issue. So I asked for another solution. They asked me to reinstal Windows and al the drivers, because they think that it is a software issue. Because there is a lot of software on my computer, and I need him every day for my work, I didn't have time to do this directly (first make a backup and then reinstall al the software). So I bought a new Lenovo thinkpad Yoga 260, and installed al my software. Now my "old" Yoga, whit the white screen issue, is ready for reinstall the software. Today I reinstalled Windows 10, but the issue is still there "sometimes white screen". So I think again it is not a software issue but a issue whit the connector from the screen to the motherboard. My question is if someone has experience whit this issue, or maybe the same issue?

A:Thinpad Yoga White screen by startup

i have the same problem i think with the yoga.. but what u mean "white screen"? and does its happend after the lenovo icon appears?

Read other 1 answers
RELEVANCY SCORE 45.2

Hello, My Thinkpad Yoga (model year 2014-2015) gives sometimes a white screen by startup, or after a softclose (for example when turn over from laptop to tablet mode). When I open and close my screen after a couple of times the screen is ok and I can work with it. I called Lenovo support because I think it is something with the connector from the screen to the motherboard. The computer was 2 months out of warranty so they say that I could send it to support for a check, what will cost me a lot of money for only analyse the issue. So I asked for another solution. They asked me to reinstal Windows and al the drivers, because they think that it is a software issue. Because there is a lot of software on my computer, and I need him every day for my work, I didn't have time to do this directly (first make a backup and then reinstall al the software). So I bought a new Lenovo thinkpad Yoga 260, and installed al my software. Now my "old" Yoga, whit the white screen issue, is ready for reinstall the software. Today I reinstalled Windows 10, but the issue is still there "sometimes white screen". So I think again it is not a software issue but a issue whit the connector from the screen to the motherboard. My question is if someone has experience whit this issue, or maybe the same issue?

Read other answers
RELEVANCY SCORE 45.2

Can the external monitor on the thinkpad 770 be used independently (ie: separate application) with the lcd ?
 

A:Solved: Dual Monitor on IBM Thinpad 770x

Dusty,

Do not confuse "external monitor" with "DUAL Monitor". The latter is what you apparently want. The former is what you have.

You can Google: Thinkpad 770 external monitor

and view item:

http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=PFAN-3PVSCN

which will confirm what you have with the 770.
 

Read other 2 answers
RELEVANCY SCORE 45.2

Hello. I have a ThinPad T431s , which does not detect any wireless network, even though the wireless adapter is active . To fix this, I have to connect to the network through the network cable after the connection is established proceed to disable the wireless adapter and turn again , then it detects the wireless networks . The big problem is that it is becoming very common this situation. What could be the reason for this? Thanks in advance.

A:Thinpad T431s don't detect wifi conectons

Hi, Have you tried to update your WLAN driver? System Update is a good tool to detect drivers and helps you to update them:https://support.lenovo.com/us/en/documents/ht080136 I would try that first and if it still has the problem, try to respond with: - Operativing system (x86 (32-bit) or x64 (64-bit)) (See Control Panel -> System)- Product Number (P/N)

Read other 2 answers
RELEVANCY SCORE 24.8
RELEVANCY SCORE 22.8

I'm running Windows 7 Pro on my Dell laptop. This laptop has been in storage and hasn't been turned on in a year. Originally, all I wanted to do was use iTunes. The problem:
 
It made me update it in order to use it, but I got an error.
 
I un-installed it and tried downloading a fresh copy and I get the following error:
After some Googling, I read that not having the latest Windows .NET framework might be the problem. Sounded reasonable so I fired up Windows Update but that gave me an error and wouldn't start checking for updates.
 
I managed to get it to check for updates, but now when it starts the process, I get the following:
I Googled the error code "8007007E" and tried a few things to try and fix it.
 
I downloaded the windowsupdatediagnostic.diagcab, found on Microsoft's site, here:http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
I tried resetting the Windows Update reset tool, using "MicrosoftFixit50202", found here:http://go.microsoft.com/?linkid=9665683
I download the system readiness tool, found here:https://www.microsoft.com/en-us/download/details.aspx?id=3132
I tried a clean boot.
 
I tried renaming the Windows Update Softwaredistribution folder.
 
None of this worked.
 
I ran the System File Checker tool (SFC.exe) and the results said I had bad files, but I don't know how to fix them. It generated a CBS log, which is too large for me to post (10MB) , so I've uploaded to dropbox,... Read more

A:Windows update error.. System File Checker integrity error..iTunes install error

Open the Command Prompt, copy and paste the commands below one at a time followed by pressing Enter after each command.
 
net stop wuauserv
 
rmdir /s %windir%\softwaredistribution\wuredir
 
net start wuauserv

Read other 9 answers
RELEVANCY SCORE 22.8

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

Read other answers
RELEVANCY SCORE 22.8

I had a very bizarre problem today. I downloaded about 50 .mpg files and put them into a folder on my desktop. I opened one of them, and it worked fine, but after that every time I even opened the folder that the files were in, only half of the thumbnails would appear and then it would tell me that I had a Visual C++ Runtime Error, from explorer.exe aborting. At the same time as this, windows would pop up a little message saying that my virtual memory was low. Later, it popped up a message saying that my Media Player needed to be reinstalled and that my Norton Antivirus needed to be reinstalled. Then it disabled my Norton Firewall and my Norton Antivirus. Lastly, I started getting error messages telling me that my soundcard needed to be configured to handle voice files, by enabling hardware acceleration. The only problem with that was that Windows would not let me access the advanced sound settings!

I am running Windows XP (all patches up to date), 256 MB Ram, 75 Gig HD - so I figured the "low" virtual memory had to be an error. I tried tripling the virual memory to 1GB and also tried letting Windows automatically set the virtual memory size, but neither of these fixed the problem. My immediate thought was that it was a virus or trojan, but Norton VirusScan, Swat-It Trojan Scanner, and System Suite VirusScan all failed to detect anything, and all of them have their definitions up to date.

I ran a Google search to see what other things I should try and none of the... Read more

Read other answers
RELEVANCY SCORE 22.4

I am getting a blue screen after I attempt to login to a pc.

Verification error in wmiacpi.sys (WMD driver error) 20e

wmiacpsi.sys = 152f at B9BAB852F

I have run the Dell diagnostic and everything passed.
This is a Dell laptop latitude D531. Dell just replaced the hard drive about 10 days ago. It worked fine until Monday.

Any any what this may be?

A:Blue Screen Io Error. Verification Error In Wmiacpi.sys (wmd Driver Error) 20e

Are you sure of the spelling of the 2nd file name? If so, Google doesn't give any results for it - which is suspicious.The first file name ( wmiacpi.sys ) is a Windows file that's used to help manage the ACPI settings in your system. http://www.bleepingcomputer.com/filedb/wmiacpi.sys-7763.htmlA BSOD error will usually point to the file that the error occured in, but this may not be the source of the error. Here's a link on how to find more info about the BSOD message: http://www.bleepingcomputer.com/forums/top...tml#entry409491Once you locate the .dmp files for the event, you can use this link to generate an analysis of the dump for us to have a look at ( http://forums.majorgeeks.com/showthread.php?t=35246 )

Read other 6 answers
RELEVANCY SCORE 22.4

The error onpage of Dell Start Page Trying to edit weather and the error message shows up. the error message is as follow: Line 2 Chasr 316 Error "HTML" is null osr not an object Code O URL HTTP:www google.com/IG/dell?HL=en&client=Del Would you send me an e-mail with the answer, please.

Read other answers
RELEVANCY SCORE 22.4

Ive just bought some new memory (TWIN2X4096-8500C5C G), the new memory doesnt seem to work unless I only add one stick, and even with that I get blue screen errors.

So from reading a few pages on teh internet I put my old memory back in, and ran windows driver verifier. Upon restarting I got and keep getting teh following BSOD.

IO SYSTEM VERIFICATION ERROR in wmiacpi.sys (WDM driver error 20e)

[wmiacpi.sys+152f at B7C5C52F]

A:Blue Screen IO Error. Verification Error In Wmiacpi.sys (WMD Driver Error 20e)

If the system ran fine...before you added RAM...then you need to see if the new RAM (by itself)...works.The new RAM may not be compatible with your old RAM, in which case the system will run fine with one or the other...but not both.The Driver Verifier tool is tricky to use, I would disregard that effort...for the moment.Remove your old RAM...put the new RAM in...see if the system works properly.FWIW: http://www.bleepingcomputer.com/forums/t/153175/blue-screen-io-error-verification-error-in-wmiacpisys-wmd-driver-error-20e/Louis

Read other 14 answers
RELEVANCY SCORE 22

Hello there. I have been redirected here by jamanji, whom has been most helpful by the way.
My PC crashed a little over a week ago.
Rather than retype everything, I would like to give you the link to my post.
I am not 'Tech' per se, but I would like to try and resolve my problem myself,
To make a long story short... I had error 0xc000000f. I have 2 threads on the subject, but the first thread was useless.( I think)
I read gregrocker's tutorial.
I made a Kaspersky Disc. I have a Pop Up from Kaspersky.
saying if I continue...........

Here are the links.

confused by what type of disc to use

Error 0xc000000f

If you read this...Thank you for your time.

A:Burnt out from error error error! Time to go back to Paper.

Ok mate one thing straight up the Kaspersky only requires a CD you can use a DVD but seriously a waste of useable space. Have been using Kaspersky security and tis rescue disk for years now so just the CD mate.

Just follow the prompts when you run the disk. It will boot (of course) but will not need Windows to do anything.

There are other options -

Bootable AntiVirus Rescue CD for Windows: Free Download any are good and again do not require Wndows to run.

If you can get it going then I would try this
http://support.kaspersky.com/viruses/utility < the top scanner TDSS Killer

Read other 9 answers
RELEVANCY SCORE 22

I have got error 0x8007371 when I tried to install .netframework 3.5 which was required to install windows essentials.
I ran DISM command to fix 0x80073712 error, and received another error message in the command prompt: Error 14098 Component store has been corrupted.
THen I ran sfc/scannow which gave another error "An error occured during installation of assembly component".
This is such a bul grab, can someone help
Thankz

Read other answers
RELEVANCY SCORE 22

Hey guys, having trouble getting XP to Update, well it did Update MSRT and failed on Flash as usual because I removed Flash.  The only thing I can think of that I changed was my Router settings to more aggressive, but it has not affected Windows 7?
 
This is the ms document on it: https://support.microsoft.com/en-us/kb/883820
 
I tried all the stuff they say there but none works.  I have SP3.
 
I am also being sent to this site, which don't look like it should.
http://windowsupdate.microsoft.com/
 
Thanks pcpunk

A:HTTP Error 500 - Internal Server Error, Error 0x8ddd0010

All good now!

Read other 1 answers
RELEVANCY SCORE 21.2

so i recently had this virus and someone on these boards helped me remove it. ty for that! but after 2 reboots it has come back..and with more errors this time like the explorer and drwatson. and also can you tell me why i have to do "open as" instead of just clicking on text documents? it says access is denied. i didnt do anything to get it again nor did i dl anything. anyway here are my logs any help is appreciated.
Gmer.txt
Hijackthis.txt
DDS.txt

A:Csrsc.exe error, Drwtsn32.exe error, explorer error

I have reasons to believe that you have a file infector onboard.
Please visit this website - http://virusscan.jotti.org
Submit the file for a comprehensive scan & then post the results back here.

C:\Windows\system32\cmd.exe

If it's virut, you need to wipe the machine immediately. Do not connect this machine to another one for you will infect that one too

Read other 7 answers
RELEVANCY SCORE 21.2

My pc reboots for no reason when I try and access my network folders. I get the following errors in Event Viewer.


************************************************** ******

Event Type: Error
Event Source: ipnathlp
Event Category: None
Event ID: 31008
Date: 2004/11/10
Time: 07:33:55 PM
User: N/A
Computer: GIGS
Description:
The DNS proxy agent was unable to read the local list of name-resolution servers from the registry. The data is the error code.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 6f 00 00 00 o...

************************************************** *******

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 2004/11/10
Time: 02:40:01 PM
User: N/A
Computer: GIGS
Description:
Error code 00000051, parameter1 00000004, parameter2 00000001, parameter3 e12cfe18, parameter4 00008080.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 35 0000005
0020: 31 20 20 50 61 72 61 6d 1 Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 30 34 2c 20 000004,
0038: 30 30 30 30 30 30 30 31 00000001
0040: 2c 20 65 31 32 63 66 65 , e12cfe
0048: 31 38 2c 20 30 30 30 30 18, 0000
0050: 38 30 38 30 8080


**********************************... Read more

Read other answers
RELEVANCY SCORE 21.2

Greetings!

I am having a problem with the above error message (error:syntax.error) when I'm running Firefox.

I have uninstalled Java and reinstalled it, but still the same problem.

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 8099 Mb
Graphics Card: Intel(R) HD Graphics Family, -238 Mb
Hard Drives: C: Total - 698475 MB, Free - 580394 MB;
Motherboard: TOSHIBA, PEQAA
Antivirus: avast! Antivirus, Updated and Enabled

Thanks,
Barbara
 

A:Error Message error:sytax.error - Firefox

See if you can find help here.

http://www.java.com/en/
 

Read other 1 answers
RELEVANCY SCORE 21.2

Just got a new computer and am trying to install my Philips Mini HiFi sytem. Contacted their support centre and they don't know what to do! The stereo system simply plugs into a usb port and plays your audio through their system. The only difference between the system it worked on a few days ago and now is that I am running Windows Professional x64.

The problem:

three things to install:

1. the Philips drivers. Philips support got me to download their drivers for Win XP.

When I install this the error rec'd is: "Install 2.15 setup. While installing drivers Plug and Play error detected. Please reboot and try again". I reboot and try again, same thing.

2. The program "Sound Agent" to run the show. When I install the Sound Agent program, the error rec'd is: "VDI32.exe has encountered a problem and needs to close".

3. MusicMatch to channel the audio through to it. (Seems ok but tells me it's out of date - no biggie I can deal with that).

In Device Manager there is "Unknown Device" listed under System Devices shown to be not installed (the yellow exlamation mark through it). When I try to Update Driver it says, "Cannot Install this hardware. The hardware was not installed because the Wizard cannot find the necessary software".

Finally, whenever I reboot I get the error message: "The QVE bus driver is not detected. Reinstall the Qsound Virtual Audio Devices Bus Enumerator driver".

I have reform... Read more

A:A Real Tough One. PnP error, VDI32.exe error and a QVE error. Help Please

Your link is not working, but many things don't have 64 bit drivers. Did the drivers say for XP or specifically for 64 bit?
 

Read other 2 answers
RELEVANCY SCORE 21.2

Ok so my first problem was what I thought the sasser worm. I researched it online and I can't find any traces of it anywhere now. I ran a few spyware checkers and stuff and I think I may have messed with some registries.

Now I cannot access the internet and heaps of things are stuffing up. I disconnected my internet and upon startup get this.

A "Data Execution Prevention" window that closes "Generic Host Process for Win32 Services".

I press OK and that goes away. I found some suggestions online but none of them seem to work. That's my first problem.

My computer runs fine until I connect my internet. It runs alright for a minute or two before I get this error.

The instruction at "0x00401000" referenced memory at "0x00401000". The memory could not be "written". Which has recently been appearing at the same time as AVG saying a threat has been detected at "C:\WINDOWS\drivers\atimixx8.sys"

After this has come up I can press OK to terminate the stop error, or cancel to debug. Either one does nothing but stops my internet from working, and the internet on other computers in my house (we are all on a network). When I try to heal/move to vault/delete the AVG threat, it says I don't have permission.

I've thought about just formatting, but I have seen people who say that even with a format, the problem still persists.

Please help!
 

Read other answers
RELEVANCY SCORE 21.2

I am using a WD Proxkey DSC and while signing I am getting the following error"
"The Windows Cryptographic Service provider reported an error: The parameter is incorrect. Error Code: 2148073511"

Read other answers
RELEVANCY SCORE 20.4

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!
GregaR

Read other answers
RELEVANCY SCORE 20.4

hi....
i have promblme , i do not know how to fix it..
i have kodak scnners i1220 plus
i have RD Web Access
the promblme is..
I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message
(Scan Error Error while Scan::0::LEAD Error: Twain source manager no)
and
(Scan Error
Error while Scan::0::LEAD Error: Twain DS is connected to max possible apps)

Knowing that the scanner system has worked to windows xp but when we tray on Windows 7 does not work
why..............
i have pormission administrator and i setup the scnners drivers agine still same problme..
.......
i have windows 7 professional
service pack1
hp compaq 6200 pro MT PC
intel(R) core(TM)i5-2500 CPU @ 3.30GHz 3.29 GHz
4.00 GB
32-bit operating systme

A:Scan Error Error while Scan::0::LEAD Error: Twain source manager no

It's possible that TWAIN DSM is missing on your Win 7 machine. You can get it here and try again.

Catherine Sea
Dynamsoft: Provider of version control solutions & TWAIN SDKs

Read other 1 answers
RELEVANCY SCORE 20

Hey to all.
I am new to this forum and I want an answer with an ERROR.
My ERROR is "Fatal Error,NET_SendPacket ERROR : NO ERROR"(the same as title of the thread)
it occurs whenever i try to play counterstrike 1.6,counterstrike condition zero or half life 1 over LAN with another computer on the same network.But as soon as i start the game in this computer OR try to find any LAN server the Other PC which is the LAN server has this error and it exits the game on that computer only and as a result I get no LAN server.
I first thought of googling this error out but nothing worked out like the QoS uninstallation and tweeking the administrative tools>Local Security Policy.(honestly i just tried these two because i cold not understand or read any further)
Ohh and I have just re-installed the windows xp sp2 on this system.
If Any Additional Information is required please let me know.
So can anybody help me?
and please be simple i am not a geek or nerd ya know,so HOW?
 

Read other answers
RELEVANCY SCORE 20

Hello,Ok so I have many issues with my laptop.First of all one day it failed and it was giving me the Hard drive not found (3F0) error.I decided to buy a new hard drive and still the same.Then I inserted a bootable usb (windows 7 pro 64bit) and tried to install windows.Then on the screen that I had to select the drive, the hard drive was shown.When I pressed to install windows a new error appeared. (ERROR CODE 0X8007045D).I devided to start over. Then again a new error appeared (Error 0x8004240f)I am really frustrated.What's wrong?Any advice?Thank you

A:3F0 Error, Error 0X8007045D , Error 0x8004240f

@ptheodoulou4abc? You need to partition the drive into one whole drive. You can use any free partition tool on-line. http://download.cnet.com/MiniTool-Partition-Wizard-Free-Edition/3000-2094_4-10962200.html REO  

Read other 9 answers
RELEVANCY SCORE 20

I've just install windows 7 home premium 64bit and got 4 times of BSOD.

for the first time error code is 0x0000001a
for the 2nd time error code is 0x0000003b
for the 3rd time error code is 0x0000003b
for the 4th time error code is 0x000000d1

I also attach minidump files and text files that I got from sf dianostic tool.



And another problem is I try to follow the instruction in this thread
How to fix BSOD caused by ntoskrnl.exe and ntkrnlmp.exe
and now I cannot start the normal window, I have to run in safe mode with network.



in the reply #4 that zigzag3413 post

Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here... Read more

A:BSOD by ntoskrnl.exe, error d1, error 3b, error 1a

For now, I do a restore point and be able to run the normal window7.

Read other 1 answers
RELEVANCY SCORE 20

Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots.

I've updated all my drivers. Tested my memory. Tested my RAM. Run a virus scan. Checked the heat on my Graphic card and CPU. and all seems to work just fine.
This is the errors i get:


Code:
Log Name: System
Source: EventLog
Date: 25-12-2013 19:10:41
Event ID: 6008
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Snaski-PC
Description:
The previous system shutdown at 19:08:21 on ‎25/‎12/‎2013 was unexpected.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="EventLog" />
<EventID Qualifiers="32768">6008</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-25T18:10:41.000000000Z" />
<EventRecordID>2045</EventRecordID>
<Channel>System</Channel>
<Computer>Snaski-PC</Computer>
<Security />
</System>
<EventData>
<Data>19:08:21</Data>
<Data>‎25/‎12/‎2013</Data>
<Data>
</Data&... Read more

A:Error 41, Error 1001 and error 6008.

Hi Snaski.

It is some display/graphics related issue.

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Let us see a screenshot of the furmark window, just before you close it.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Install the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Let us know the results.
_____________________________________________________________________________________

Code:
*******************************************************************************
* ... Read more

Read other 7 answers
RELEVANCY SCORE 19.2

Hello.
I wonder if you can help me.
I keep getting error 0x800f0906 when running DISM /Online /Cleanup-Image /RestoreHealth.


DISM /Online /Cleanup-Image /RestoreHealth
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
[==========================100.0%==========================]
Error: 0x800f0906
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required to restore the feature.
For more information, review the log file.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
*********************
relevant bits from it seem to be:
Checking System Update Readiness.

(p)    CSI Payload Corrupt            amd64_microsoft-windows-windowsupdateclient-ui_31bf3856ad364e35_7.8.9200.16927_none_28265fa316d944b7\wuaext.dll
Repair failed: Missing replacement payload.
(p)    CSI Payload Corrupt            amd64_microsoft-windows-windowsupdateclient-ui_31bf3856ad364e35_7.8.9200.16927_none_28265fa316d944b7\wushareduxresources.dll
Repair failed: Missing replacement payload.

Summary:
Operation: Detect and Repair
Operation result: 0x800f0906
Last Successful Step: Entire operation completes.
Total Detected Corruption:    2
    CBS Manifest Corruption:    0
   &nb... Read more

A:Error when running DISM /Online /Cleanup-Image /RestoreHealth - error 0x800f0906

Hi,
Please upload the DISM.log files into OneDrive and post us the link here. The DISM log file can be found at
C:\Windows\Logs\DISM\dism.log.
Besides, for the CSI payload corrupt issue, please take a try to reset the Windows update components. Then try to run the command and check the results:
Follow this guide: How do I reset Windows Update components?
In addition, update the system to Windows 8.1 will make a better usage of the features and functions offered.
Windows 8.1 and Windows RT 8.1 build on
Windows 8 and Windows RT, to bring you enhancements in personalization, search, apps, the Windows Store, and cloud connectivity, and has the security and reliability features you expect from Windows. It's fast and made to work
on a variety of devices?especially on the new generation of touch devices.
For more information regarding update to Windows 8.1 from Windows 8. please see:
Update to Windows 8.1 from WIndows 8
Best regardsMichael Shao
TechNet Community Support

Read other 5 answers
RELEVANCY SCORE 19.2

I have windows live mail 2008 Build 12.0.1606 installed on windows xp and everytime a few seconds after i close wlm i get a windows live mail encountered a ploblem and has to close error that tells me to send a report..this happens 80 percent of the time after i close the windows live mail application...By the way i have disable error reporting checked on advanced properties and disabled on services also ...i noticed on the task manager that the wlmail exe process is still running after i close the application and that seems to be the problem..Is there any way, fix or some program that i can get the wlmail.exe process to close at the same time i close the windows live mail application so i dont get this send error report message anymore ?

error i get ^

wlmail.exe still running after closing application ^

A:windows live mail 2008 (Build 12.0.1606) error report error

Hi gbp007,

Try to End Process the extra wlmail.exe file in the Task Manager Processes to see if it will stop the error for you next time.

Task Manager - Open and Close Applications and Processes

Shawn

Read other 13 answers
RELEVANCY SCORE 19.2

I did tried to update an old modem about a week ago and ever since I cannot connect to the internet. I have two laptops and works fine. I have a wireless set up.

I just tried plugging in the Ethernet connection to the laptop to no avail. Still no connection.

Info:

HP Compaq nc6230
Wireless setup

I tried connecting to other unsecured wireless networks in the area and still was not able to access the internet.

Please help.

Thank you.
 

A:Laptop cannot connect to Internet - DNS Failure, Gateway Error 0x2afc, Error 12007

Read other 8 answers
RELEVANCY SCORE 19.2

I have an Acer 6920, Vista, and I have taken the following actions after the computer would not boot:
a. ordered reinstall disk from Acer
b. reinstalled the system using the four disk
c. worked with computer normally for three weeks
d. encountered the original problem again of not booting
e. tried to go back to factory settings using the reinstall disk from Acer
f. after 65%, encountered the 0XD00000A error
g. tried again, and encountered the same error

Is this a Vista problem, an Acer problem, or something that happens often?

Any help would be greatly appreciated.

Read other answers
RELEVANCY SCORE 19.2

no matter how many times i clean the drive it will still come up with this error. i can't figure out what is going on. i am able to convert the movie just fine but when it comes times to write to blank dvd, it won't do it. this is the problem i am having on my laptop which i will include the log. for some reason on my pc the program convertxtodvd doesn't even acknowledge that i have a dvd drive , i believe it is the pcouffin, which i have uninstalled and reinstalled but i cannot get it to work. it says it is working fine but device no longer available. well here is the log from my laptop which will convert but will not finish the copy.

2/20/2008 1:29:47 AM info ********** Report session closed ***********
2/20/2008 1:29:30 AM error BURN: Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burner is dirty)]
2/20/2008 1:28:14 AM info BURN: Write started 894784 sectors to write
2/20/2008 1:28:14 AM info BURN: Writing speed requested x4.0, effective x4.0
2/20/2008 1:28:13 AM info BURN: Available write speed: 8x, 6x, 4x, 2.4x
2/20/2008 1:28:13 AM info BURN: Media ID: SONY-D21-00
2/20/2008 1:28:13 AM info BURN: Media type: DVD+R
2/20/2008 1:28:13 AM info BURN: Multiword DMA Mode 2
2/20/2008 1:28:11 AM info BURN: Scanned files #8, folder #2 - total size 1831393280 b. (1.71 Gb.)
2/20/2008 1:28:11 AM info BURN: Inserted media type : DVD+R
2/20/2008 1:28:11 AM info BURN: Write started
2/20/2008 1:28:10 AM info --------... Read more

A:Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burne

Replace the laptops burner... Laptop/notebook CD/DVD R/W's are very delicate and are more subject to failure than desktop writers
 

Read other 3 answers
RELEVANCY SCORE 19.2

I am trying to install cakewalk SONAR 7 and I get this error when running the installation and start the small window on "c++ 2005":

"Error 1935. An error ocurred during the installation of assembly
'Microsoft.VC80.ALT.type="win 32", version="8.0.50727.762", publickey Token="1fc8b3b9a1e18e3b", processor Architecture="AMD64". Please refer to help and support for more information."
-------------------------------------

When I checked the event viewer, I have a Vista application event ID 33, with the description below,

"Microsoft.VC80.MFC,processorArchitecture="amd64",
publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762"
Could not be found. Please use sxstrace.exe for detailed diagnosis."
--------------------------------------

When I try to run the sxstrace.exe, I have then this message (the error message is in blank.):

"C:\Users\Xxxxx Comp>sxstrace parse -logfile:sxstrace.elt -outfile:sxstrace.txt
Parsing log file sxstrace.elt...
ProcessTrace failed. Error message is:"


I been google this problem and try different approaches for the last 3 days and nothing fix this problem. I try to install microsoft visual c++ 2008 and c++ 2005 and have similar errors.
Any help in this matter will be highly appreciated, right now is a "dead end"...

Thanks, guys in advance for the help in this matter...

A:"Error 1935. An error ocurred during the installation of assembly 'Microsoft.VC80.AL

Hi,

Just to confirm for us, install the Visual C++ redist 2005, then VC++ redist 2005 SP1, then VC++ redist 2008, then VC++ redist 2008 SP1. Only restart PC after last one has finished and do them in order, one at a time. This will take quite a long time, let them finish. Then run windows update and select everything, in particular the updates for the VC++ redists (mainly security updates) and restart PC again. Tell us if anything here fails and any error messages you get. Are any of your applications getting side by side configuration errors? Then try your program install again. Hopefully it will now work. Tell us what happens. Will try and post links later as this post sent off iPhone.

Hope this helps, though you may have already done this.

Richard

P.S. You could try sfc /scannow though I really doubt it will help.

EDIT:

Here are the web addresses in the correct order:

http://www.microsoft.com/downloads/d...displaylang=en

http://www.microsoft.com/downloads/d...displaylang=en

http://www.microsoft.com/downloads/d...displaylang=en

http://www.microsoft.com/downloads/details.aspx?familyid=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

Read other 2 answers
RELEVANCY SCORE 19.2

Hi All
system info : HP LAPTOP DV6 -1256tx , windows vista sp1 32 bit
When I am trying to install windows vista sp1 from recovery disks/partition I am getting the error from recovery manager prompting me to choose either to retry or see the details for failure : CTOERROR.flg in form of notepad on my desktop. I have done retry 100 times but to no avail. I cannot restart after this recovery failure message as it shows dialog box on restart: windows security update is not installed successfully or is not trusted.So, i have to go through recovery process again to see the desktop (everything functioning - internet,video, music all) but only once.
Last time i got this message too . When i did installing windows from recovery disks few months back, that time i figured out to install all imp. updates through automatic windows update.All the updates were installed successfully and then it restarted and gone through process of language settings,time settings and all....
But this time when i am trying to update windows, i am getting windows update error 0x643 which is for security update for .net framewrok 3.5 sp1 and family update.I do know the answer how to get away with this error from "windows help" and also from this forum too, which asks for installing .net framework updates from windows update site directly. But the problem is:
Windows update ask me to restart after automatic or manual windows update installation takes place and restart causes problem as it shows d... Read more

A:Windows vista recovery error CTOERROR.f​lg and following that error 0x643 while insta

Do you have the original (no SP1 or SP2) Vista installed? You won't be able to install SP1 otherwise.

Read other 7 answers
RELEVANCY SCORE 19.2

Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks

HDDStatus - Tool to check hard disk status, health and reliability

Hey,

I've been using GoodSync for the past couple of months to chain synchronize 3 hard disk drives and ran into my first issue today. GoodSync stopped responding whilst synchronizing changes to files so I used task manager to manually end the process.

I'm not entirely sure how much damage has been caused but when I re-analyzed the file changes a lot of the changes prior to the crash was no longer listed.. So I'm unsure of the file integrity but have so far noticed some music video files are corrupt with cyclic redundancy check errors but is not easily visible to check corrupt files because they still play but parts of data are missing.

I think I've experienced cyclic redundancy check errors before when my external hard drive fell flat on it's side whilst it was playing music (3 years ago). It took me a long time to filter out the bad files because all the mp3 files worked but some songs would randomly play in others etc.. is their some type of automated CRC scanner or method to check all my files ?

Thanks

A:Error copying file: Data error (cyclic redundancy check). CRC Scan ?

If you are able, try this programme, it is VERY good. HDD Regenerator - Dmitriy Primochenko Online

Read other 1 answers
RELEVANCY SCORE 19.2

I dont know how this started but i need major help please.... When I turn on my computer I receive an AutoIt Error, Line -1, Something went wrong with " Object" and when i dismiss the warning later on I receive Data Executive Win32 Prevention Errors and memory reference errors. I have read alot of forums for help. I have ran malware programs, virus scans, etc.... No luck its just getting worse and slowing down my computer and now I get a blue screen when I try to boot up in safe mode and the drivers loading screen comes up. What do I do?

I read the instructions for posting this type of post, and I have attached the logs requested.



.
DDS (Ver_2011-08-26.01) - NTFSx86
Internet Explorer: 8.0.6001.18702
Run by patesag at 16:03:47 on 2012-06-08
.
============== Running Processes ===============
.
.
============== Pseudo HJT Report ===============
.
uStart Page = hxxp://bakerhughesdirect.com/
mStart Page = hxxp://search.searchonme.com/
uInternet Settings,ProxyOverride = *.local
BHO: AcroIEHlprObj Class: {06849e9f-c8d7-4d59-b87d-784b7d6be0b3} - c:\program files\adobe\acrobat 7.0\activex\AcroIEHelper.dll
BHO: DivX Plus Web Player HTML5 <video>: {326e768d-4182-46fd-9c16-1449a49795f4} - c:\program files\divx\divx plus web player\ie\divxhtml5\DivXHTML5.dll
BHO: PlusIEEventHelper Class: {551a852f-39a6-44a7-9c13-afbec9185a9d} - c:\program files\nuance\pdf professional 7\bin\PlusIEContextMenu.dll
BHO: Groove GFS Browser Helper: {72853161-30c5-4d2... Read more

A:AutoIt Error, Data Prevention Win32 Error, and Memory Reference Errors.... Help!!!!!!

When the drivers loading screen comes up during safe mode boot the computer goes to a blue screen. I never faced this problem before. Please help....

Read other 19 answers