Over 1 million tech questions and answers.

BSOD Driver Power State Failure ntoskrnl.exe, ntkrnlmp.exe

Q: BSOD Driver Power State Failure ntoskrnl.exe, ntkrnlmp.exe

Been having the occasional blue screen every few hours for the past week or two now, I've been trying to pinpoint exactly which drivers are causing the issue or if it's something more serious. It's a custom built machine and around 18 months old now, so it's not completely unlikely that some of my parts are starting to wear out. (Not overclocking)

Also, I had a hal.dll error associated with the Driver Power State Failure as well, it just didn't fit in the title.

If anyone can give me a hand with this it'd be much appreciated. I've attached the SF files as requested.

RELEVANCY SCORE 200
Preferred Solution: BSOD Driver Power State Failure ntoskrnl.exe, ntkrnlmp.exe

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD Driver Power State Failure ntoskrnl.exe, ntkrnlmp.exe

I"m sorry that I missed this post.
Please reply back if you still need help. I'll reply after work today (after 3pm Eastern time in the US).

Read other 1 answers
RELEVANCY SCORE 143.2

Hi all,

I was hoping to bring the 'big guns' on this forum to bear on my problem. My friend has an Asus UX32A notebook with Windows 8. To provide some back story (the meat of the problem is after this paragraph if you want to skip)...

It is brand new with hardly anything installed on it besides Norton 2013 and Office. It would freeze about 60 seconds after start up, for a good long while, and it seemed to get worse over time. I have done a LOT of things to it in the last two days - uninstalled Asus bloatware (which was also causing a black screen on startup problem), updated just about every driver and BIOS, disabled fast start up, disabled 'dynamictic' via cmd prompt, disabled all non-Windows services and then progressively enabled them to try to isolate a rogue one. I THINK I might have fixed it (in the end I left 7 services disabled - two Intel Management, Intel Dynamic application, Intel ME service, as well as Wireless PAN, Skype updater and Sony PC companion. I have no idea if it's one of these but the system seems not to freeze now and I have reached the end of my patience anyway). It might seem like too much but it was very difficult because e.g. to test the effect of one change I would have to restart, and the laptop would not restart because of the black screen issue, or would immediately freeze. It was very frustrating and I had to work from safe mode to start with, but now it seems to behave better.

But...

I have had several hang-during-reboots today, forcing ... Read more

A:Driver Power State Failure; ntoskrnl.exe; ntkrnlmp.exe

Check out the forum thread here "ntoskrnl.exe" BSOD - Windows 7 Help Forums

Since it is new or relatively new a complete reinstall using the ASUS recovery is recommended. That I saw on several searches.

Read other 1 answers
RELEVANCY SCORE 121.6

Hello, my computer has crash 4 times within the past two hours. I believe it has something to do with the Elgato Game Capture HD software I installed on the computer, since it seemed to only happen when I was either using it, or trying to uninstall it. Currently, I've uninstalled it, and no BSOD so far. I have updated my drivers and performed any windows updates available. Please help.

Thanks in advance.

Read other answers
RELEVANCY SCORE 121.6

Hey, my desktop computer keeps freezing here and there. I have a bad feeling it happens when working with my data HDD (not a system one). Some applications freeze and some not, I can restart, but it gets stuck when "Turning off" .. after few mins I get BSOD.

I've tried to boot up with driver Verifier and it freezes right after login screen .. no BSOD (within 30 mins).

The only thing I know from minidump is that it causes ntoskrnl.exe

Would someone help me to identify my problem?

Thanks in advance.

A:BSOD Driver Power State Failure ntoskrnl.exe

Welcome aboard.

Code:
fffff880`0355b488 fffff880`010bb041Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x3f041
sptd.sys is the most well known causes of a crash in windows 7. There are some technical reason behind it is that much crash prone. It is a paer of Daemon tools, so better you uninstall Daemon Tools.

Also free up the startup.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
Let us know the results.

Read other 8 answers
RELEVANCY SCORE 121.6

Hello guys,
I tried resolving this issue by myself, but I can't figure it out. I'm getting BSOD on my new laptop. The laptop is brand new, I bought it about one month ago. It came with the default linux OS installed by the manufacturer, but I did a format and I installed Windows 7 Ultimate x64.
Machine specs:
Acer Aspire V3-771G 736b4G75Maii
CPU: Intel Core i7-3630QM 2.4GHz with Turbo Boost up to 3.4GHz
GPU: nVidia GeForce GT 640M 2GB DDR3 memory
RAM: 1x 4GB DDR3
HDD: 750 GB Toshiba

I got BSOD 3 times, every time I was browsing the internet using Mozilla Firefox. First couple of times I was on facebook checking some pictures and the 3rd time I was on forums looking for a solution to this problem. The BSOD happened when the laptop was on high performance settings, but i can't remember if it was plugged in or not.

As i said, the laptop is 1 month old, but it came with a broken speaker so it was sent to the service where they replaced the entire front cover. They said the reason is that the speakers are glued to the front cover so it was not possible to replace only the speakers. Before sending the laptop to the Acer service I did not experienced any BSOD and I used it for like 2-3 weeks, I even did some gaming on it.
The first BSOD occurred last week and the laptop wasn't used until yesterday when it happened again and the last BSOD happened just earlier today.

I will attach the prefmon.html and the folder with the files I got from the BSOD_Windows7_Vista_v2.64_jcgriff2_.ex... Read more

A:BSOD ntoskrnl.exe driver power state failure

I forgot to mention, from the last BSOD in event viewer i have the following events:
Event 6008
The previous system shutdown at 3:44:38 PM on ‎8/‎19/‎2013 was unexpected.

Event 1001
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa8005294a10, 0xfffff80000b9c3d8, 0xfffffa8004b9a570). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 081913-17596-01.

Event 41
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Event 1101
Audit events have been dropped by the transport. 0

Event 10002
WLAN Extensibility Module has stopped.

Module Path: C:\Windows\system32\athihvs.dll
Event 4001
WLAN AutoConfig service has successfully stopped.
Event 37
The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 41 seconds since the last report.

this last event shows up 8 times, one for each core. The CPU has 4 physical cores, but with hyperthreading it has a total of 8.

I did a Driver Verifier according to the instructions posted here (http://www.techsupportforum.com/foru...ed-473665.html) and there was no BSOD.

Read other 16 answers
RELEVANCY SCORE 121.6

I'm getting (seemingly) random BSOD's, and according to bluescreenview it's caused by ntoskrnl.exe. Not really sure how to fix this, and what it means.

It's a relatively fresh install of windows, built PC

AMD phenom II X4
ECS a750GM-M V7.0 motherboard
G Skill memory (4 GB)
Windows 7 Pro x64
if any of that is relevant.
All windows updates are installed
All drivers are up to date

It says I'm not permitted to upload the .dmp files, so I'll post them on Mediafire, unless there's a way I can view them myself and post them.

Mediafire link to all four dump files: http://www.mediafire.com/?psykx435dqvuabq,8m3hdbhxsquktsg,mth615eme064b6k,m6n5nd3144355os

A:BSOD, driver power state failure, ntoskrnl.exe

Hi -This is a way to see the BSOD records and post them here -Download BlueScreenView:http://www.nirsoft.net/utils/blue_screen_view.htmlunzip downloaded file and double click on BlueScreenView.exe to run the program.when scanning is done, go to EDIT - Select AllGo to FILE - SAVE Selected Items, and save the report as BSOD.txtOpen BSOD.txt in Notepad, copy all of the content, and paste it into your next replyThank You -

Read other 13 answers
RELEVANCY SCORE 120.4

Hi!

I recently got a laptop from Scan.co.uk, it's a custom build using the Clevo kit.
I have been having intermittent BSOD's with a Driver Power State Failure message at random times, I can't see a discernible pattern.

It can happen whether on the desktop, chrome or gaming but generally on the desktop during minimal use.
I can play games for around 8 hours without issue but sometimes I'll get the error straight after booting up or whilst shutting down or just doing work in chrome.

I've seen people with similar issues in this forum and have tried to make sure all my drivers are up to date but I'm missing something somewhere

Any help offered would be greatly appreciated

Steps I've taken so far;

Avast Virus scan - No threatsEset online scan - No threatsAll windows Updates AppliedDism run
"Dism /Online /Cleanup-Image /ScanHealth" - The component store is repairable. The operation completed successfully."Dism /Online /Cleanup-Image /CheckHealth" - The component store is repairable. The operation completed successfully."Dism /Online /Cleanup-Image /RestoreHealth" - The restore operation completed successfully. The component store corruption was repaired. The operation completed successfully.

A:BSOD Driver Power State Failure ntoskrnl.exe+153ca0

Hi ApocalypseMeow & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
0: kd> !irp ffffe0011851f010
Irp is active with 6 stacks 4 is current (= 0xffffe0011851f1b8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe001143e9880 00000000 fffff801f3aa2fc4-ffffd0002a3468f0 Success Error Cancel pending
\Driver\pci dxgkrnl!DpiFdoPowerCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 ffffe00117f61040 00000000 fffff800b4395fd8-ffffe0011a826f08 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
\Driver\nvlddmkm nt!PopRequestCompletion
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe0011a826f08
Args: 00000000 00000000 00000000 00000000


As we can see that the "nvlddmkm.sys" which is the... Read more

Read other 7 answers
RELEVANCY SCORE 120.4

Hello,

This morning when i woke up when i switched my pc's monitor i got those beloved letters.My computer was on idle,probably it fell asleep.The settings on power options were on Balanced mode.Pc is on stock clocks.No overclock made.
Heres the minidump file.
Notice: this happened a couple of days once i updated lots of windows updates.

A:BSOD - Driver power state failure - ntoskrnl.exe+75bc0

Welcome to the Forum.

AVG is contributing to your BSOD. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

Rt64win7.sys Thu Feb 26 15:04:13 2009 (49A65B0D)
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC
Driver Reference Table - Rt64win7.sys

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run a System file check (SFC): SFC /SCANNOW Com... Read more

Read other 1 answers
RELEVANCY SCORE 120.4

Hello,

I've had 3 BSOD in the last few days, usually when my computer is asleep or when I am not actively using it. Malwarebytes anti-malware software indicates no issues, as does esot nod antivirus5.

Ran a free program (BlueScreenView v1.47 by nirsoft) which indicated a driver power state failure and/or a ntoskrnl.exe problem.

I do not know how to proceed, and would love some advice!

A:BSOD - driver power state failure or ntoskrnl.exe problem?

All of your crashes are caused by your Texas instruments USB 3.0 driver:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80140bfcd0, fffff80000b9c3d8, fffffa8011a2aac0}

*** WARNING: Unable to verify timestamp for tihub3.sys
*** ERROR: Module load completed but symbols could not be loaded for tihub3.sys
Probably caused by : tihub3.sys

Followup: MachineOwner
---------
Driver Reference Table - tihub3.sys
Looking at the driver we can see it is rather old:

Code:
kd> lmvm tihub3
start end module name
fffff880`053d7000 fffff880`053fb000 tihub3 T (no symbols)
Loaded symbol image file: tihub3.sys
Image path: \SystemRoot\system32\DRIVERS\tihub3.sys
Image name: tihub3.sys
Timestamp: Wed Nov 23 00:50:16 2011 (4ECC8998)
CheckSum: 00021577
ImageSize: 00024000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update your driver from here: Analog, Embedded Processing, Semiconductor Company, Texas Instruments - TI.com

Read other 5 answers
RELEVANCY SCORE 120.4

Hello,

I've been having bsod's for a while ever since I disabled the Automatic Restart. I'm going to say that I figure it might have something to do with my Toshiba external hdd but I hope I can get a fix for this. I've spent days researching online - I've tried to find if I had any drivers to update by going to my Device Manager but all "update driver" results I get are the same: they are up to date.

My zipped minidump files: http://sdrv.ms/YPs4lS
Win7 Home Premium x64
Dell Inspiron 580S
Intel Pentium G6950 2.80GHz
4GB of RAM
Service Pack 1

Most recent crash info:On Sun 2/24/2013 1:44:16 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022313-16130-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75C40)
Bugcheck code: 0x9F (0x3, 0xFFFFFA80059EB060, 0xFFFFF80000B9C518, 0xFFFFFA80074604B0)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
Any help is greatly appreciated!

A:BSOD: Driver Power State Failure ntoskrnl.exe 0x9F

Hi and welcome to the forums.

Seems like a core Kernel level issue.

Things to do:

Run System File Checker to verify/repair the integrity of system files.
Full tutorial here: SFC /SCANNOW Command - System File Checker

Uninstall COMODO Internet Security and replace it with Microsoft Security Essentials - Microsoft Windows
Update it and run a full scan.

Go to Start>Run
Type MSCONFIG and press Enter.
Click on Startup tab, now click on Disable All.
Click Apply and OK. Reboot the system.

In addition, run chkdsk /f to repair corrupt hard drive sectors.
Full tutorial here: Disk Check

If all of the above fails, as a test, I'd suggest you to Enable Driver Verifier to find out which driver/software is causing the BSOD. Once you enable it, expect some frequent BSODs. After 24 hrs, disable the Driver Verifier and re-upload the dump files for analysis.

Let us know if it works.

The below is for information purpose only:

BugCheck Analysis:


Code:
ADDITIONAL_DEBUG_TEXT:
You can run '.symfix; .reload' to try to fix the symbol path and load symbols.

MODULE_NAME: nt

FAULTING_MODULE: fffff80002e56000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 503f82be

DRVPOWERSTATE_SUBCODE: 3

DEVICE_OBJECT: fffffa8005bca060

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x9F

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80002f3f6d2 to fffff80002ed4fc0

STACK_TEXT:
fffff800`00b9c4c8 fffff800... Read more

Read other 5 answers
RELEVANCY SCORE 120.4

I've been experiencing this BSOD on and off for a while now, and after doing some research came across a forum post suggesting to do a memtest. I've only had time to run it for 3 passes and will try for the full 8 later in the week when I have more time.

I thought I would start a thread to make sure there are no other underlying issues that could be the cause of the BSOD. Attached are the SF Files. Thanks!

A:BSOD Driver Power State Failure 0x0000009f (ntoskrnl.exe)

Hi MSB117.

The dedicated GPU is totally out!!! Does a restart brings it back?

Yes, a stop 0x9F can do it, based on sleep/hibernation settings and it is often seen for Optimus Technology/Switchable graphics. It is not the first instance.

As the GPU is causing continuous issue over a time, I would suggest you to contract Dell/Alienware servicing center.

Read other 7 answers
RELEVANCY SCORE 119.2

Hello All,

I believe the problem is the result of ntoskrnl.exe because WhoCrashed crash dump analysis says...

This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800A35EA10, 0xFFFFF80000B9C518, 0xFFFFFA8010D8CCA0)
Error: DRIVER_POWER_STATE_FAILURE

although occasionally it is....

This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800A35EA10, 0xFFFFF80000B9C518, 0xFFFFFA8010D8CCA0)
Error: DRIVER_POWER_STATE_FAILURE


? Win 7 Pro
? x64
? The original OS installed on the system was Win 7 Home
? The OS is a full retail version that I installed
? 5 year old Board and chip
? I have re-installed the OS (always a clean install from a wiped drive) several times. Current install is a little over 1 year old.

? Intel Core i7 860 @ 2.8GHz
? NVidia GeForece GTX 650 Ti Boost
? Dell Studio XPS 8100 Motherboard w/ Intel H57 Chipset
? Diablotek Pro Series 550w Power Supply

? Dell
? Studio XPS 8100

Desktop

I have expanded and replaced a number parts on the system since originally purchased. I currently have 3 SATA Drives and the DVD drive attached to the motherboard as well as an external drive attached to the external eSata port. 12GB RAM. My OS resides on its own SSD and all files are stored on other drives. I am not overclocking. The only security I am running is MS security essentials.

Let me know if there is any additiona... Read more

A:BSOD Regularly WhoCrashed says ntoskrnl.exe Driver Power State Failure

Hi

Can you update the driver to your Broadcom NetLink (TM) Gigabit Ethernet from Broadcom?
Let us know the result.

Read other 3 answers
RELEVANCY SCORE 119.2

Hi

XPS L502x : 2nd generation Intel Core i7-2720QM processor 2.20 GHz with Turbo Boost
2.0 up to 3.30 GH
8Gb Ram
Windows 7 64 bit

Have been having repeated BSODs lately. Used to get them about once or twice a week but its now a few times a day that it happens.

Have attached the zip file made by the download from this site and will paste the WhoCrashed Report below.

I have tried numerous fixes and nothing has worked...getting desperate.

Thanks in advance guys


System Information (local)
--------------------------------------------------------------------------------

computer name: LAUCHLANMAC
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 8499937280 total
VM: 2147352576, free: 1943908352



--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.


On Sun 3/4/2012 4:14:17 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\030412-14710-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800D8BC4F0, 0xFFFFF80000B9C3D8, 0xFFFFFA800BDDA010)
Error: DRIVER_POWER_STATE_FAILURE
file path: C... Read more

A:Random BSOD : ntoskrnl.exe (nt+0x7CC40) Driver Power State Failure

These were Related to Mbm3DevMt.sys F3607gw Mobile Broadband Device Management Driver from MCCI Corporation.

I would re-install the newest driver available.
The same is true for wwanussf.sys F3607gw Mobile Broadband Module from Ericsson AB

Why 2 Broadband drivers?

Read other 6 answers
RELEVANCY SCORE 118

Hello and thanks for letting me post on this awesome forum!!!!

I am fixing a family members computer and it has stumped me. I have tried everything that I can find online related to my problem outside of reinstalling but I think it could be a hardware (power or memory) issue from what i read and a reinstall wouldnt fix it.

Driver_Power_State_Failure

I cannot trigger the BSoD of cue. Ive tried quite a bit, bringing it back from sleep, full load, no load, Skyrim, and different video cards.

I have been using Bluescreenviewer / myeventviewer to give me some incite but I couldn't find anything that would help my particular problem. So i present it to the people that know more then me, the online community. I followed the BSoD posting rules but let me know. Ill be checking back frequently.

Thanks again.

PS this computer is having raid issues. I get "Degraded NVIDIA mirror 931.51G" red flashing error for a couple seconds during boot. I dont know if this is related but BSoD's did not start at exactly the same time, but quite a bit of time after, I am told.

A:Random BSoD, Driver Power State Failure, reports blame ntoskrnl.exe

A few issues

1-asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).


2-These were all related to your NVIDIA nForce RAID Driver. Yours is from 2006. Update to current of remove.

3-Old drivers

Code:
ASACPI.sys 3/27/2005 10:30:36 PM
nvrd64.sys 11/10/2006 4:18:39 PM
SiWinAcc.sys 6/14/2007 8:02:02 PM
SiRemFil.sys 6/20/2007 3:42:10 PM
SI3132.sys 10/3/2007 2:39:29 PM
dump_nvstor64.sys 1/25/2008 11:01:22 PM
nvstor64.sys 1/25/2008 11:01:22 PM
nvm62x64.sys 10/17/2008 5:01:06 PM
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of De... Read more

Read other 3 answers
RELEVANCY SCORE 109.6

I'm getting a BSOD pretty much every time I shutdown the PC. Has only just started happening in the last couple of weeks.

DRIVER_POWER_STATE_FAILURE
caused by driver: ntoskrnl.exe

I've attached the SFDiagnostic here - thanks.

A:BSOD - ntoskrnl.exe "driver power state failure" at shutdown

Hi thedriver.

The BSODs are caused by REALTEK 2832U USB Driver (c:\windows\system32\drivers\rtl2832uusb.sys)





Quote:
Windows Error Reporting: Fault bucket X64_0x9F_3_POWER_DOWN_IMAGE_RTL2832UUSB.sys, type 0
Event Name: BlueScreen
Response: Not available
..........;Analysis symbol: X64_0x9F_3_POWER_DOWN_IMAGE_RTL2832UUSB.sys
............



Code:
BugCheck 9F, {3, fffffa8008604060, fffff80001f4a518, fffffa800ae4e710}

*** WARNING: Unable to verify timestamp for RTL2832UUSB.sys
*** ERROR: Module load completed but symbols could not be loaded for RTL2832UUSB.sys
Probably caused by : RTL2832UUSB.sys

Followup: MachineOwner
---------
And the driver is old enough.

Code:
fffff880`07778000 fffff880`07785000 RTL2832UUSB T (no symbols)
Loaded symbol image file: RTL2832UUSB.sys
Image path: RTL2832UUSB.sys
Image name: RTL2832UUSB.sys
Timestamp: Wed May 04 14:05:12 2011 (4DC10FC0)
CheckSum: 0000ACF2
ImageSize: 0000D000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Some information about what this driver does: Realtek
Unfortunately I am unable to search an appropriate update for you. I hope you know the sources to get it, as you are using it.

If you can, update the driver. Otherwise, dont use it.

Read other 3 answers
RELEVANCY SCORE 109.6

Hi Folks,

I really hope you can help me, I followed the instructions to create the attachement.

What I know so far is that this machine has BSOD'd several times...The last 2 times a ultilty called BlueScreenViewer.exe says it's due to "Driver power state failure" caused by: ntoskrnl.exe

I checked event viewer for the time mentioned 6/17/2012 11:29:02 pm and it says there is system error "source:Bug Check" at that exact time

For anti-virus I have MS Security Essentials. For Spyware, I have Spybot S&D.
I use with Workstation 7 as a study too so it has hosed my VMs which is very disappointing. I would really like to root cause this to continue with confidence...

I know you hear this all the time...but... please help! I don't mind collecting info and checking into things, I am just out of my element a little here.

I looked throug the results of the permon report and it seems clean for the most part.

Thanks in advance,

Jay

A:BSOD "Driver power state failure" caused by: ntoskrnl.exe

Is there anything else I can do to help action this post? Thanks

Read other 9 answers
RELEVANCY SCORE 109.2

I have a 13 days old win7 pro RTM x64 system. In the past two days I had
two BSODs of similar fashion:

The machine was running for several hours at that point, and suddenly the
blue screen pops up. I wasn't really pushing the system, just browsing.

The crash dump is like this in both cases:






Quote:
This was likely caused by the following module: ntoskrnl.exe
Bugcheck code: 0x9F (0x3, 0xFFFFFA8003B4B050, 0xFFFFF80000B9C518, 0xFFFFFA80052E0E10)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Likely the culprit is another
driver on your system which cannot be identified.



I'd appreciate any help.

A:ntoskrnl Driver power state failure

I had the same problem
I tried everything nothing worked
I saved everything in safe mode and did a re-install

But do some searching on Google
one thing I didnt try was replacing ntoskrnl.exe with one downloaded from the net
I will search for mine & post it here for you here

Also do some searching on here

Read other 9 answers
RELEVANCY SCORE 109.2

I apologize in advance if this is a duplicate thread to a problem already solved previously.

Two months ago, I purchased this laptop (Alienware M17x R3) and was met with strange problems some time after owning it. An error code for memory failure, refusal to boot, BSOD with the error of DRIVER_IRQL_NOT_LESS_OR_EQUAL and SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Not sure what to do, I didn't do much of anything, except check my RAM chips for contact damage, and a swapping of positions was performed. So far, those particular error messages have not happened again, except for a DRIVER_POWER_STATE_FAILURE. These happen seemingly at random, but occur more frequently when the computer is under graphics stress, such as in a Starcraft 2 match.

I have, per the posting suggestions, attached relevant files.

Thanks.

A:Driver Power State Failure, ntoskrnl.exe?

Welcome to SevenForums.

Here's an output of your recent BSOD dump file:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800e3c6a10, fffff80000b9c3d8, fffffa800ed0fe10}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 000000000000... Read more

Read other 9 answers
RELEVANCY SCORE 107.2

Hello.I am new here so please excuse me for any mistake i might make.

Just when i sing in my account i get an error and my laptop restarts.
My operating system is windows 8.
I have collected all the information you might need with SF diagnostic tool.

Attachment 48873

Hope you help me.

A:Driver Power State Failure ntoskrnl.Unkown driver.

Hi Simiskos123 & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the latest dump file for informative purposes :-

Code:
******************************************************************************** *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa80046a3060, fffff880009bfb40, fffffa80088498f0}
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys
Followup: MachineOwner
---------
1: kd> !irp fffffa80088498f0
Irp is active with 4 stacks 3 is current (= 0xfffffa8008849a50)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 2 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 ffffffffc000000e
[ 16, 0] 0 2 fffffa80046a3060 00000000 fffff88006e17018-fffffa80085907c0
\Driver\pci nvlddmkm
Args: 000000... Read more

Read other 3 answers
RELEVANCY SCORE 106.8

Hello,
I've spent days researching online - I've tried to find if I had any drivers to update by going to my Device Manager but all "update driver" results I get are the same: they are up to date.
My minidump file: https://drive.google.com/file/d/0Bz9...it?usp=sharing .

DRIVER_POWER_STATE_FAILURE
Bug check code: 0x0000009f
Parameter 1: 00000000'00000003
Parameter 2: fffffa80`07d0ba10
Caused by Driver: ntoskrnl.exe
Caused by address: ntoskrnl.exe+75bc0
File description: NT Kernel & System
Crash address: ntoskrnl.exe+75bc0

Windows 7 Professional x64 Service Pack 1
Lenozo Ideapad z500
8gb ram, NVIDIA GEFORCE 2gb
Intel Core i7

Any help is greatly appreciated!

A:Windows 7 Pro: Driver Power State Failure ntoskrnl.exe 0x9F

from the research Ive done previously etc; I do believe the ntoskrnl.exe possibly leads to ram issue. I would test the ram by running memtest86+ from the following link: its best to let it run overnight if possible and to run it several times to make certain it shows accurate results as sometimes errors wont show up right away. Here is the link to that:

Memtest86+ - Advanced Memory Diagnostic Tool

If you get any errors from the test; then its likely you have one or more bad ram sticks

Read other 9 answers
RELEVANCY SCORE 104.8

Win7 laptop running fine, suddenly 2 BSODs today, within an hour. First occurred while surfing (firefox), second occurred without any keyboard/mouse activity. No new hardware installed since new hard drive about a month ago. SF attached. TIA

A:Random BSODs, ntoskrnl, driver power state failure reports on minidump

Sorry for the late reply, Your dump files are not opening for me.
But you should remove some add ons to firefox, specially the adxloader.dll





Quote:
Event[10757]:
Log Name: Application
Source: SideBySide
Date: 2012-10-03T15:36:32.000
Event ID: 9
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: RWT-PC
Description:
Activation context generation failed for "C:\Users\RWT\AppData\Roaming\DocuSign\DocuSign Ink\adxloader.dll.Manifest".Error in manifest or policy file "C:\Users\RWT\AppData\Roaming\DocuSign\DocuSign Ink\adxloader.dll.Manifest" on line 2. The manifest file root element must be assembly.


It may be the cause of the crash while using firefox.

Just a question, when the keyboard and mouse was inactive and you got the crash, was the Cyberlink editing program in use? The event log says so, and actually that program failed there.

You should update the nvidia display driver, too.

Code:
Driver c:\windows\system32\drivers\nvlddmkm.sys (8.17.12.7527, 10.09 MB (10,583,656 bytes), 6/23/2011 6:38 PM)
Update your WiFi driver.

Code:
Driver c:\windows\system32\drivers\netw5s32.sys (13.1.1.1, 6.44 MB (6,755,840 bytes), 1/13/2010 3:36 PM)
Update ethernet controller driver.

Code:
Driver c:\windows\system32\drivers\yk62x86.sys (11.43.1.3, 310.28 KB (317,728 bytes), 5/26/2011 2:29 AM)
Free up the startup.
Click on the Start button
Type “msconf... Read more

Read other 3 answers
RELEVANCY SCORE 104.4

http://m.bestofmedia.com/sfp/images/...il-100x100.jpg


I hope someone can help been on this problem for a week now.

I have an external synth that conects via usb My problem is when i switch off the nord the usb ports crash and any new connection is not recognised until i restart my computer which when i do hangs on the shutdown page for about 10 minutes the i get bsod with error driver state failure or bad pool header.

I can start my computer then turn on and off the nord with no issues the problem only happens when i use it in cubase 7 as a midi track even if no midi signal is sent to the nord. The problem is when i turn off the nord by the power button the driver disconnects then if i try to reconnect the nord nothing happens in the device manager all usb that are still connected work but any new connection is not seen.

I have done a fresh install of windows 7 64bit updated all drivers for everything & windows updates.

I have tried disconnecting all usb devices and still the same problem. Im not over clocking or under clocking. I have tried a different usb lead, used various usb ports, external powered usb ports.

The drivers i have installed are nord a1 midi, clavia usb 3.02 driver & clavia compostite usb driver.The latest ones.

The units was working fine until about 2 weeks ago where i was able turn the unit on and off using cubase with no problems.

Hope we can find a solution to the problem.

Read other answers
RELEVANCY SCORE 102.8

Hi,

I have a 2 week old HP Envy 14, running Windows 7 Home Premium 64bit, 4GB Ram, and an ATI Radeon HD 5650 Graphics card.

Initially for the first few days the notebook worked well, no problems. This week, I encountered the dreaded BSOD. The notebook had trouble shutting down or restarting, taking 10-15 minutes or so. Upon rebooting, I get a BSOD with DRIVER_POWER_STATE_FAILURE message.

I also encountered the USB not recognizing anything that was connected to it after the computer started. If the mouse/ thumbdrive was connected before the computer booted up, it worked. If it was disconnected after booting up, and reconnected the mouse/ thumbdrive would not work. I do not get anything (no error messages or acknowledgement that anything was connected).

I checked the Device Manager, and there are no error messages.

Strange this is, these problems happen sporadically. Sometimes everything works well- USB working as it should, not issues restarting etc. Upon rebooting, the problem starts again.

I've tried updating the latest Win updates, drivers, HP bios etc but still no luck.

Please help. Thank you in advance.

A:BSOD Drive Power State Failure, ntoskrnl.exe, USB ports not working

Hi cabe and Welcome to SF!

First of all, hpdskflt.sys was mentioned in the crash dmp, it belongs to HP Mobile Data Protection System Disk Filter. I would download and install fresh copy of the driver, or might be uninstall it to see if it has anything to do with the crashes you've experienced.

For the mouse and thumbdrive, you might want to have their drivers installed properly, or perhaps you might want to try to have fresh re-install of USB driver by going to Device manager, under USB list you uninstall everything then restart your system. (To go to Device manager, right click on computer and choose manager)

In looking through your driver, I can see some out of date one:

Code:
btwl2cap btwl2cap.sys Fri Apr 03 19:28:45 2009 (49D6A9BD)
Broadcom Bluetooth L2CAP Service. Please download and install fresh update of it


Code:
RimSerial_AMD64 RimSerial_AMD64.sys Mon Nov 24 11:01:01 2008 (492ADDCD)
Virtual Serial Port driver for Blackberry. This need to be updated as soon as possible

BUGCHECK SUMMARY:

Code:
BugCheck 1000009F, {4, 258, fffffa800416d680, fffff80000b9c510}

Unable to load image \SystemRoot\system32\DRIVERS\hpdskflt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for hpdskflt.sys
*** ERROR: Module load completed but symbols could not be loaded for hpdskflt.sys
Probably caused by : umbus.sys

Followup: MachineOwner
---------
Regard,

Tuan

Read other 7 answers
RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98

Hello forum. My wife has a Dell Inspiron 15r 5010. Win 7 Home Premium x64. Yesterday she had a BSOD. I have followed your posting guidelines and hope that I have everything attached that you will need. She will go nuts if she isnt able to play her games lol Thank you in advance for your time and suggestions.

A:Driver Power State Failure BSOD

One of the most clear cut crash dumps I have ever seen.

Code:
FAULTING_MODULE: fffff8800aacc000 tap0901
It is used by two things. Comodo, and some VPN clients.

If you have (a glance at your system says that you have) such programs installed, uninstall them and see how it goes.

Let us know the result.

Read other 5 answers
RELEVANCY SCORE 98

Hi,

I'm new to this forum but i hope you can help with BSOD issues on my windows 7 Laptop.

I have a HP HDX18 Laptop that is about 8months old. I bought it with Vista home premium and upgraded to windows 7 home premium when it was released. As soon as i upgraded i started having blue screen of death problems (BSOD) problems. The laptop became unusable as it would crash intermittantly. It turned out to be my anti-virus software, Zone Alarm and so i swapped to Kaspersky.

About two months ago the machine started running slowly, locking up and crashing. I wasn't able to complete any tasks, there didn't seem to be any system restore points and it was completely unusable and so i decided i would recover to factory condition (Vista) and start again. I have done this and reloaded Windows 7 update and normal windows software. I also upgraded again to windows 7 ultimate so i would have networking capability as my other computers are XP pro and a Mac and the networking function in Win 7 home premium is worse than useless.

This all completed successfully last week and within a few days i am again having problems. I cannot shutdown my laptop, it will hang (saying 'shutting down') for about five minutes and then BSOD. I have attached the minidumps files using the SF Diagnostic Tool from this forum.

I also cannot use any usb ports, backup and have trouble with some proprietory HP software.

First things first, i need to find out why i cannot shut down so hopefully someone can ... Read more

A:BSOD - driver power state failure

  
Quote: Originally Posted by onyxquark


Hi,

I'm new to this forum but i hope you can help with BSOD issues on my windows 7 Laptop.

I have a HP HDX18 Laptop that is about 8months old. I bought it with Vista home premium and upgraded to windows 7 home premium when it was released. As soon as i upgraded i started having blue screen of death problems (BSOD) problems. The laptop became unusable as it would crash intermittantly. It turned out to be my anti-virus software, Zone Alarm and so i swapped to Kaspersky.

About two months ago the machine started running slowly, locking up and crashing. I wasn't able to complete any tasks, there didn't seem to be any system restore points and it was completely unusable and so i decided i would recover to factory condition (Vista) and start again. I have done this and reloaded Windows 7 update and normal windows software. I also upgraded again to windows 7 ultimate so i would have networking capability as my other computers are XP pro and a Mac and the networking function in Win 7 home premium is worse than useless.

This all completed successfully last week and within a few days i am again having problems. I cannot shutdown my laptop, it will hang (saying 'shutting down') for about five minutes and then BSOD. I have attached the minidumps files using the SF Diagnostic Tool from this forum.

I also cannot use any usb ports, backup and have trouble with some proprietory HP software.

First things... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hi everyone, have had a huge amount of help from this website in the past and am wondering if anyone can help.

I have a year old Windows 7 Acer Laptop. Has been performing fine, but have had a couple of Blue Screens in the past week, one of which was a "Driver Power State Failure".

Have attached the minidump files to this message. If anyone can help it would be greatly appreciated.

Thanks,
Jon
 

A:BSOD Driver Power State Failure

don't like to bump my own threads but if anyone can help, would be great help.
 

Read other 1 answers
RELEVANCY SCORE 98

Any help is appreciated. This BSOD error has happened 3 or 4 times over the past couple months.
Each time after a hard shut down and reboot it seems to work normal.
Today when before it happened Chrome internet was very slow/lagging but that might have been wifi related not sure.

thanks

Read other answers
RELEVANCY SCORE 98

Hi, I've been getting this BSOD error quite frequently now and I'm not sure what the problem is.
I've attached the zip from the SF Debug Tool.

Note: I have a modded BIOS for lower GPU voltages from
L502X modded bioses download (GPU voltages and more!)
and also have my GPU underclocked if that information is relevant.

A:BSOD Driver State Power Failure

Hi Aurum & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Sat Dec 20 08:06:04.657 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\122014-5562-01.dmp]

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows 8 Kernel Version 9600 MP (8 procs) Free x64

System Uptime: 0 days 0:08:10.789

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Probably caused by : ntoskrnl.exe ( nt+1509a0 )

BugCheck 9F, {3, ffffe000cf5eb4f0, ffffd00020775960, ffffe000d5bf2bd0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe000cf5eb4f0, Physical Device Object of the stack
Arg3: ffffd00020775960, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe000d5bf2bd0, The blocked IRP
BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: WRONG_SYMBOLS

CPUID: "Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz"

MaxSpeed: 2000

CurrentSpeed: 1995

BIOS Version A12

BIOS Release Date 09/07/2012

Manufacturer ... Read more

Read other 8 answers
RELEVANCY SCORE 98

I'm running Windows 7 Home Premium on an HP Pavilion Elite e9180f machine. I have an Intel core i7 processor (2.66 GHz), 9GB RAM.

I received a BSOD when Windows was shutting down. The message said "DRIVER_POWER_STATE_FAILURE".

I've attached the results of running the BSOD_Vista_v2-2_jcgriff2_.bat file and perfmon.

Thank you in advance.


Brad

A:Bsod driver power state failure

Please start by going to Device Manager and right clicking on the Microsoft Teredo Tunneling Adapter(s). Select Uninstall and let it uninstall the adapter. Don't be surprised if the adapter doesn't come back when rebooting - the only problem would be if it still shows an error condition after rebooting.

I suspect that this will fix the BSOD's, but we'll have to look at the dump files and (at a minimum) replace the networking drivers just to be sure.

....Running the dump file now.....

The dump file blames e1y62x64.sys - a component of your Intel(R) PRO/1000 Gigabit Networking Adapter

Please download a copy of the latest Windows 7 64 bit driver for this device from the Intel Download Center ( http://downloadcenter.intel.com/Default.aspx )
Then uninstall the current Intel networking driver from your system
Then install the freshly downloaded driver and monitor for further BSOD's.

Please also update this driver: 000.fcl Fri Sep 26 09:11:22 2008
It is a component of the Cyberlink program installed on your system.

Summary of the BSOD:

Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Jan 28 19:05:24.908 2010 (GMT-5)
System Uptime: 0 days 10:14:11.188
BugCheck 9F, {3, fffffa80083a6060, fffff800044e8518, fffffa800b85a790}
*** WARNING: Unable to verify timestamp for e1y62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1y62x64.sys
Probably caused by : e1y62x64.sys
DEFAULT_BUCKET_ID: ... Read more

Read other 1 answers
RELEVANCY SCORE 98

I've been coming across this bsod for a few weeks now, it only happens when i put the computer into sleep/hibernate. It even happens sometimes when the computer tries to start from a cold boot. The only hardware change i've made to the computer was a new wireless adapter from netgear model no.: WNA3100. I made sure to download the latest driver to support windows 8 but the bsod still occurs.

Heres a link to my minidump file if anyone can analyze it and tell me which driver is causing the problem it would be much appreciated.

https://skydrive.live.com/?cid=284E7...02A97481AA!105

Thanks

Read other answers
RELEVANCY SCORE 98

Hi. Im having a problem with my computer. The last few days I have been having a new BSOD problem. I have been getting a driver power state failure for a while and I had it fixed but when I updated my graphics card drivers it started again and I cant figure out why. Any help would be much appreciated.

A:BSOD Driver Power State Failure

Welcome to the forum.

Based on the bugcheck, I would recommend you follow and complete the steps given below:





Quote:
1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot o... Read more

Read other 1 answers
RELEVANCY SCORE 98

I've been dealing with random BSOD for months now when I sleep/hibernate my computer. Lately it has gotten quite bad and happens nearly everytime. I'm thinking it is a hardware issue, but I'm trying to rule out a software issue. I've tried to update every outdated driver on my laptop to the latest version. Nothing seems to help.

I've also run full hardware diagnostics/memory scans, and that doesn't reveal any problems.

Any help before I throw the computer out the window would be appreciated!

Thanks,
Michael

A:BSOD Driver Power State Failure

raterus, welcome to SF .

You mentioned several bugchecks occurring over a period of a few moths yet the file
contains not more than one dump file, if you have the rest please upload them as well.

As for the bugcheck in question.

The predominant driver of the stack is nvkflt.sys:


Code:
fffff800`00b9c4e0 fffff880`0470b854 nvkflt+0x38854
fffff800`00b9c4e8 fffff880`0470c938 nvkflt+0x39938
fffff800`00b9c4f8 fffff880`046f32d4 nvkflt+0x202d4
fffff800`00b9c518 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c520 fffff880`046f327c nvkflt+0x2027c
fffff800`00b9c580 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c598 fffff880`046e569c nvkflt+0x1269c
fffff800`00b9c618 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c630 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c638 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c648 fffff880`046e569c nvkflt+0x1269c
Driver Reference Table - nvkflt.sys

If we check it's time-stamp we can see that it is not inline with your description of the problem
being it is very recent.

Code:
Timestamp: Fri Aug 09 21:59:07 2013
Driver Version 9.18.13.2078
Download the latest version offered by your OEM.
Dell Support
Attachment 285494
Looking at the bugcheck we can see it's due to the PNP-subsystem:

Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
... Read more

Read other 7 answers
RELEVANCY SCORE 98

Hi Everyone,

Got a BSOD yesterday and want to see if you guys could help me isolate the issues. This is my first BSOD in about a week.

Actually, things used to be alot worse like a week ago, I was getting random BSODs due to the installation of a Belking Wireless Adapter. I thought I had everything resolved by uninstalling the drivers and then reinstalling under windows XP because I haven't had a BSOD since then.

Anyways, I am running Windows 7 and would appreciate any help.

Thank you,
Abad

A:BSOD Driver Power State Failure

Hi,

Got the correct files for you to look at.

Thanks again.

Read other 2 answers
RELEVANCY SCORE 98

I'm getting daily BSOD failures, and was finally able to get some of the information. I've attached the zip file and hopefully someone can tell me what i need to do to remedy this. I've included as much information as i can find in my profile.

A:BSOD Driver Power State Failure

In your files, I only found 2 dump files, about a month apart. If you are having daily BSODs, please be sure your computer is configured to create small memory dumps. this will help you Dump Files - Configure Windows to Create on BSOD Pleas use the steps listed to create small memory dumps.

The first dump was on 5-9


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff800034c45da, fffff88003968fa8, fffff88003968800}
Probably caused by : memory_corruption ( nt!MiGetNextNode+2e )
Followup: MachineOwner
The second dump was in July of 2012 So really is of little importance at this point. However, I would suggest you update your Nvidia driver to the latest WHQL version I would also use this method to insure you get a clean install. NVIDIA Drivers - Avoid Problems

I would also, after doing the above like you to Open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, noti... Read more

Read other 9 answers
RELEVANCY SCORE 98

Current OS
? Windows 7 Home Premium
? 64-bit

? What was original installed OS on system?
Windows Vista Home Premium 64-bit.

? OEM version (came pre-installed on system) or full retail version?
OEM Version.

? Age of system
7-8 Months.

? Age of OS installation
Windows 7 just installed, but i had this problem previously with Vista.

? CPU
Intel i7 920

? Video Card
Nvidia GTX 285

? MotherBoard
Not sure.

? Power Supply - brand & wattage
Not sure.

Thank you for your time. :)

A:BSOD driver power state failure

Hi -

The bugcheck on the lone mini kernel dump -

0x9f (0x6,,,) = driver in an inconsistant state of power; the power transition timed out waiting to synchronize with the Pnp

The first driver was named the probable cause of the BSOD. They all need to be updated -
[/font] [/code]

Code:

RTSTOR64.SYS Tue Dec 02 01:01:40 2008 (4934CF44) - Realtek USB 2.0 Card Reader

e1y60x64.sys Mon Aug 18 17:45:05 2008 (48A9ED61) - Intel(R) 82567LF-2 Gigabit Network Connection
gwfilt64.sys Thu Apr 10 04:20:29 2008 (47FDCDCD) - Realtek HD audio
SCDEmu.SYS Tue Aug 07 11:19:48 2007 (46B88D94) - PowerISO Computing, Inc.

Realtek HD Audio --> http://www.realtek.com.tw/DOWNLOADS/...&GetDown=false

Realtek USB card reader drivers --> http://www.realtek.com.tw/downloads/...&GetDown=false

Intel Intel(R) 82567LF-2 Gigabit Network Connection --> http://www.intel.com/support/etherne.../cs-029669.htm

Power ISO - see system manufacturer's web site.

Un-install Daemon Tools/ Alcohol 120. The driver common to each has caused many BSODs in Windows 7 systems.

Regards. . .

jcgriff2

.




Windows 7 x64 - Bugcheck 0x9f (0x6,,,)

Code:

Opened log file 'C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\_99-dbug.txt'

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading ... Read more

Read other 6 answers
RELEVANCY SCORE 98

Hello all
I started to have a driver power state failure bsod error. I don't what triggers the error it seems random to me tho I have a hunch about it's being connected to internet usage or hdd, like when I use spotify or dropbox it's likely to crash.

Uploaded both dm log and sf diagnostic log

Thank you all!

A:BSOD Driver power state failure,

Hello

It seems like Google Chrome is causing an issue I would uninstall that and see how that goes.
I am also seeing an error with your NVidia driver. The driver is dated Wed Jul 02 18:42:02 2014.
Try see if there is an update for your NVidia card.

I also noticed from dxdiag that your display is using the integrated Intel HD 4000 and not your GeForce GTX675m. Not to sure on this though, but that is what it seems like.

Are you using multiple displays?
Is your DVI or HDMI cable plugged into the Graphics card?
(Best to wait for additional input from someone else regarding the display)

- Callum

Read other 4 answers
RELEVANCY SCORE 98

Howdy

So I'm getting the driver state power failure BSOD as well. This computer used to be Vista, about a month ago I put Windows 7 on here. It worked great for like 3 weeks but now its giving me this BSOD every 1-2 days, starting May 7th. It happens randomly - the only constant is that I've had firefox open but I don't know if that really has anything to do with it.

I did look into this before posting here, but it seems like basically everybody's is for different reasons so I'm not sure what to do.

I've attached the latest memory dump file from today.

Any help would be greatly appreciated!

A:BSOD - Driver State Power Failure

dmp points to atapi.sys. Please run a system files check:


Quote:




Open an elevated command prompt and enter sfc /scannow.




Update or remove these old drivers or their respective programs:

Code:
fffff880`0443b000 fffff880`0459f400 RTKVHD64 RTKVHD64.sys Mon Jun 02 06:11:37 2008 (4843C759)
fffff880`02d5d000 fffff880`02d76000 SCDEmu SCDEmu.SYS Fri Oct 31 02:56:21 2008 (490AAC15)
fffff880`04fa2000 fffff880`04ff8000 SynTP SynTP.sys Thu Mar 27 21:15:32 2008 (47EC46B4)
You may also try a repair install.

Please upload any new dmps that might come.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Jonathan\AppData\Local\Temp\Temp1_051510-21528-01.zip\051510-21528-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00ba2730?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02a12000 PsLoadedModuleList = 0xfffff800`02c4fe50
Debug session time: Sat May 15 21:55:53.880 2010 (GMT-4)
System Uptime: 2 days 11:35:38.626
Loading Kernel Symbols
.................... Read more

Read other 1 answers
RELEVANCY SCORE 98

Laptop works fine as long as monitor doesn't go to sleep or if computer is shutdown. After a certain period of time when monitor goes to sleep, BSOD appears and then computer restarts. If I try to shutdown the laptop, it hangs. Screen just says "Shutting Down" for approximately 10 minutes and then get BSOD. Works fine in Safe Mode. I have 2 additional files that I will have to post in the thread. Any help would be greatly appreciated.

OS - Win 7 (x64)
HP HDX Laptop purchased in November 2009 with Vista...upgraded to Win 7 in December
CPU - Intel Core 2 Duo - P7450 / 2.13 GHz
Video Card - NVIDIA GeForce 9600M GT
Not sure about motherboard and power supply data...let me know where to find it and I will post.

Thanks!

A:BSOD - Driver Power State Failure

Attached are 2 additional files.

Read other 1 answers
RELEVANCY SCORE 98

Hi. Every time I shut down, I'm getting the good old BSOD with the message DRIVER POWER STATE FAILURE. I attach TSF_Vista_Support.zip containing TSF_Vista_Support files and PERFMON.html. System spec below...

Windows 7 Home Premium 32-bit
Previous OS - Windows Vista
System is 8 months old, 4 months since Windows 7 installation
1.4Ghz Intel Core2 Solo
Motherboard: Acer Aspire 4810T Base Board Version
3GB RAM
Controller: Intel(R) ICH9M-E/M SATA AHCI Controller
Display: Mobile Intel(R) 4 Series Express Chipset Family

I hope that covers everything. Any help would be much appreciated as I have no idea what is going on! Many thanks in advance

A:BSOD Driver Power State Failure Win 7

Hello and Welcome to TSF,

From what you are stating here - Do have any external USB devices attached to the computer? were they attached when you reinstalled another operating system?

Read other 4 answers
RELEVANCY SCORE 98

I get a BSOD after working for a while and there seems to be nothing in common with the activities I am working on when it occurs. Computer is a HP Pavilion tx100 laptop with Vista Home Premium. I have attached the dump files from several occurrences. There were some additional files that for some reason I could not zip but are listed in a tex file included in the zip file. If you need them let me know and I'll try and send them

Thanks for any insight you can provide.

A:BSOD Driver Power State Failure

Thanks for the additonal info in the text file. These are the BSOD messages that are saved in your Event Viewer and will likely correspond to the dump files that I'm analyzing right now. The zip file contains 14 memory dump files from late May until very recently.

They are primarily STOP 0x9f errors with a single STOP 0xfe error.
The STOP 0x9f errors are a DRIVER_POWER_STATE_FAILURE error,
While the STOP 0xfe is a BUGCODE_USB_DRIVER error

So, the most likely cause here is a USB device that's having trouble with "suspend" operations. Do you have any USB devices attached to your laptop? Does this problem go away when they're unplugged?

Now we wait for the analysis to finish......

Phew! It's finally done!

So, the analysis shows the primary suspect as being ATSwpDrv.sys (dated from August of 2007) - which is a component of the AuthenTec Fingerprint Reader. It's usually hooked up internally to the USB bus, so this tends to confirm the initial suspicions.

The HP website doesn't show a TX100 laptop, but does show 36 different versions of the TX1000. Use this link to determine the exact model of your laptop: http://h10025.www1.hp.com/ewfrf/wc/d...t_page=product (it's the numbers that number 1 points to) Let us know what the model number is.

Next, go to Start and type in "control system" (without the quotes) and press Enter.
Let us know what it says under System...System Type

Armed with that information, we can visit this site an... Read more

Read other 19 answers
RELEVANCY SCORE 98

Hi,

I have been having a problem with multiple BSOD on my almost-new laptop (got it in November).

The blue screen will happen at completely random times, sometimes I am just surfing the web when it happens.
Today it has happened twice withing 10 minutes.
I have of course Googled it, but there seems to be a lot of different solutions, and they all rely on the mini dumps.

I have no experience when it comes to these crash dumps, but I have gathered them in a zip file and I really hope someone can see what the problem is!

My specs are as follows, please ask if you need more information:
XMG A723 Shark Gaming Edition laptop
Intel® Core™ i7 4th Generation Quad Core
NVIDIA® GeForce® GTX 765M 2GB GDDR5
3 x 204-pin SO-DIMM sockets supporting a maximum of 24GB 1600MHz DDR3 memory
Intel HD Graphics
Intel® HM87 Express Chipset
2x 9.5mm 2.5" SATA-III Drive
1x mSATA-III SSD

Thank you in advance!
- Sophie
 

A:BSOD: Driver power state failure

Read other 8 answers
RELEVANCY SCORE 98

? OS -Windows 7
? x64
? Vista x64 original
? Age of system ~ 4yrs
? Age of OS installation - just reinstalled about a month and a half ago
? Q6700 quad core 2.66
? 2x 8800gt
? Asus p5n-e sli
? Power Supply - xion 800watt


the blue screen usually happens after the computer hibernates or something similar. i know it happens alot more than i actually see because i come back to my computer and it will have a recovery message. if theres anything else i need to post just let me know.

A:BSOD Driver power state failure

Are you overclocking - either the system or the video card? If so, please stop until we're finished troubleshooting.

Please check the KB articles about hibernation/sleep at this link: http://www.carrona.org/bsodindx.html#0x0000009F

There are 11 memory dumps
3 different BSOD errors
and 4 different causes blamed (all are hardware or Windows drivers)
This makes a hardware failure a possibility. In particular, you have 4 STOP 0x124 errors - which are usually either hardware or compatibility based. Please follow the instructions for troubleshooting STOP 0x124 errors here: http://www.sevenforums.com/crash-loc...-what-try.html

The P5 series of motherboards tends to have issues with RAM in Win7. Please don't use the Auto setting in the BIOS - rather, visit the website of the RAM manufacturer, get their recommended settings and use them in your BIOS.

Asus doesn't completely certify your motherboard for Win7 - so you may have issues that involve compatibility. Also, in this case, there is a driver present that is a known cause of BSOD's (ASACPI.sys dated from 2005). As there are no Win7 compatible drivers listed, you'll have to download the Vista 64 bit version and install it in Comaptibility mode. Again, this will be at your own risk as there's no guarantee of compatibility.

Here's the link to the page for the driver: http://support.asus.com/download/dow...ge=en-us&os=30
Expand the Utilities section and download the "ACPI driver for ATK 0110 virtual device&quo... Read more

Read other 3 answers
RELEVANCY SCORE 98

Hi
I have had for 2 days 20% CPU of SVchost. exe
and now a BSOD 9F Driver power state failure
Before i did this month MS update (only one critical update) and uninstalled Quicktime.
rebooted, running avira and no other virusscanner.
Any help is appeciated.
Thanks
Ar7

Read other answers
RELEVANCY SCORE 98

Hi All

Being the non-technical, geekless person I am, I would certainly very much appreciate your assistance in ascertaining why I have just experienced a BSOD during Shutdown which took over half-an-hour.

My Windows 7 Ultimate x64 was working perfectly up until now and I am at a total loss as to why this has occurred.

I have attached a Crash Report courtesy of NirSoft's BlueScreenView software program.

Thank you in advance for your assistance with this matter.

Warmest Regards

Neil (Mr Smiley)

A:BSOD-Driver Power State Failure-Please Help

According to what you attached in the screenshot, it appears that one of your services failed to stop or shut down, causing the system to go in to a infinite loop that tried to kill that process.

It is just a one time event or does it happen often?

Read other 5 answers