What are the measurements of the power adapter plug (that plugs into the power port)? I'm looking specifically for the two measurements that apply to the inside diameter and outside diameter of the plug. Typically, each of these measurements is given in mm (millimeters).ThanksRead other answers
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)
I am not really sure what happend, it was working. Then the next day i unplugged the adapter plug from the pc and the power cord from the wall. and when i plugged the power cable back in the surge protector and the light was on. but when i plugged the adapter plug into the pc and the light on the power adapter shut off. and im not really sure if the power supply is broken, or if its something with the motherboard or the power input is broke on the pc.
Hello @Morgan2468, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer's light on the power adapter shut off. Is the desktop not able to power on? Does the adapter work if plugged into another outlet? Does the adapter light come on if it is plugged directly into a wall outlet? Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!Cheers!Read other 2 answers
THE POWER ADAPTER LIGHT TURNS ON WHEN PLUGED TO THE WALL OUTLET BUT WHEN I PLUG IT IN TO THE COMPUTER IT TURNS OFF, PLEASE HELP WITH THIS ISSUE. I HAVE TRIED THEREE DIFFERENT POWER ADAPTERS AND THE COMPUTER DOSE NOT POWER ON , THERE IS NO POWER AT ALL AND THE POWER LIGHT IS NOT TRUNIN ONRead other answers
I am traveling to Hong Kong in a couple of months. My HP laptop is from the US. It has an external power brick that takes 100-240V.
My question is about the cord that goes from the power brick to the wall outlet. The cord has a US plug. Does the cord also take 100-240V and I just need to buy a plug adapter, or does the cord only take US voltage and I need to buy a new cord?
You just need a plug adaptor, the power brick and the cord itself already supports International Voltages (worldwide)
(e.g. Hong Kong uses 50 Hz, 200/220 V, so you're pretty much covered there.)
Something like this:-
Amazon.com: Belkin F8E449 Universal AC Travel Adapter: Electronics
I have been searching for a right angle adapter for the DC power plug. The male plug diameter is 4.5 mm (0.178 inch diameter). The existing male plug is straight and the cord receives much stress at that point because the female receptacle is located on the side of the laptop rather than the back. A right angle adapter will relieve that stress. There are many right angle adapters available but I have been unable to find any of the correct size needed, which is much smaller on this laptop. Looking for a source!
If you search the forums, you'll find others who've looked extensively and not found any.Read other 1 answers
Hi I'm using an Advent 7111 Laptop using Windows XP Media Centre SP2.
I have an Orange Livebox wireless router (formerly Wanandoo I believe) and I can connect wirelessly on my laptop just fine when it is running on just the battery. As soon as I plug in the power adaptor/charger, the wireless connection disconnects. When I hover the cursor over the wireless connection logo in the bottom right corner (system tray i think it's called) it says the connection strength is excellent!? But even when it says it is excellent strength I still can't sign to Windows Live Messenger or surf the web! Please reply ASAP please!!!
I did that to myself once when I carelessly put the power supply too near the wireless adapter.
If your power supply is not within inches of the adapter, and not in the direct path between router and adapter's antenna I'd guess you have a serious problem with the power supply or with the overall wiring in your house. Try plugging into the same outlet as the router.
Can anyone provide the specification for the power adapter tip for the HP 15 Notebook? I'm looking for details on size. Thanks. Bill
Part Number: 45 W HP Smart AC adapter (nPFC, RC, 3-wire, 4.5 mm) 741727-001. 19.5V 2.31A 45W Here is a picture with the dimensions of the tip. If this is "the Answer" please click "Accept as Solution" to help others find it.Read other 1 answers
I recently purchased a Lenovo Ideapad 110-15ISK, Model 80UD0017US, and would like to purchase a 2nd power adapter as a backup. I saw in the hardware manual that there are several part numbers listed, and the specific ones on my adapter are:45w AC Adapter Model Name: PA-1450-55LLLC P/N: 5A10H42923 In looking for the part online, I saw several on eBay and Amazon with the PA-1450-55LL reference, but at least one seller mentioned that the size of the connectors aren't always the same. In the hardware manual I did not see a reference as to the connector size (ie 4.0mm*1.7mm), which is the connector size reference I saw by one seller. Does anyone know the connector size on this power adapter for my model? Thanks,KimRead other answers
I verified the PSU is good.
I removed all drives, all cards, even memory.
All the fans spin for a moment then nothing they stop.
I assume the MB is now destroyed? A GTX 260 has two 6 pin power connectors, since the PSU only had one 6 pin power connector, I thought to try it.
MB is Asus P5QC
So is it dead?
Did you read the GTX 260 manual to see if it has to have the two connectors on?
This is an old MB, so it has a story. Tell us how did you get it and what memory, GPU etc it has before.
With no memory it won't boot. Do you have a speaker connected to the MB so you can hear the beeps when you turn it on?
Witch power supply you have? GTX 260 requires 500W as minimum.
I have an external hard drive Seagate backup plus 1 tb working fine with Sony vaio E15136 win 8.1 64 bit 4gb Ram. As long as I change the power supply i.e either plug in or plug out the power supply of my laptop, external drive is re-detected.
The external drive draws power from laptop.No external power source.
In case of USB pen drives this thing didn't happen.
Looking for any solution or explanation?
Sorry I don't know the proper terms, but basically the pin inside the jack where the power cord gets plugged into on my laptop was bent so that it's really hard for me to plug in my power cord and have it stay in place. My warranty with best buy has expired, so I need to figure out how to solve this problem on my own. I can't just leave it like this because the cord comes out really easily and I can't continue to work with such a tenuous setup. Anyway, is this just a matter of replacing the entire unit inside my laptop? I know you probably need more information, but I'm not sure what to provide, so please ask any questions. The laptop is a Toshia M-45, about 3-4 years old. Thanks in advance
umm.. bend it back so it's closer to normal? That's all I can say about it. usually works for me.
My daughter has a HP laptop and she cannot use it as it wont turn on. I thought it was the a/c adapter but it is not (other daughter has the same machine). I think the problem is where the adapter plugs into on the laptop. Can this be replaced or is her laptop broken completely?
Please help, she is driving me mad x
Which laptop model is it (get the info from the label on the bottom, not the bezel or plastic near the screen.
The adapter plug can be repaired by a skilled technician... but the cost is often as high as $175... the cost of a new motherboard. The part itself is sold by HP for about $40 from their "support" center, but should really only be about $6.00 on eBay. The trick is the soldering, which require skill and a lot of experience.
When we know your model numbers from the bottom sticker, we can perhaps be of more help.
It would also be helpful to know the city near where you live that might have technicians.
The pin on the inside of the ac adapter plug on the back of my notebook computer broke off. Therefore, I am not able to connect the ac adapter. I have a hp pavilion za4805us model. Does anyone know if that can be repaired. I understand that some plugs can be replaced and others are attached to the motherboard. Any ideas or help.
I'm not sure about that particular model, but you would think it would be like anything else, just soldering a new plug onto the motherboard. Not something I could do, but a laptop specialist can do it I would think.
Finally broke down and started building a new system -
I'm too old to game, this all started out as a home video
Anyway - gathered all my components, now I'm working
to assemble them.
The case came with an Okia Model 500-ATX power supply.
But no wiring schematic.
I'm trying to identify the power supply fan plug - what seems
to be it doesn't at all match the connector on the board.
And I've got that positively identified by the board manual.
The board has a small male 3 pin connection. The only thing I
can find that might be the fan connector coming from the
supply is a small 4 pin plug at the end of 1 of the strings of
drive power harnesses. Nothing tucked up behind the
supply case or anything.
Is that likely to be it? Or would that be for a floppy or something?
I tried to Google for a wiring schematic, but could find nothing.
In fact, nothing much at all on this brand of supply - just
a couple places that sell them. Please don't tell me I got
an el cheapo that isn't worth having!
At the risk of getting ahead of myself, in case I need to adapt
something like that to the different style male connector on the
board, in this case or something else I may find as i progress,
is there some type of source for adapters, or what would I do?
Bear with me, this probly won't be the last question I'll dream up -
just getting started.
While I'm at it - the board manual talks about a conn... Read more
There are basically two voltages available to you: 5V and 12V. Doesn't really matter where you get it from - some pin on the mobo or some wire from the PSU.
From the PSU the yellow wires are 12V and red ones 5V, black is ground. The fan voltages should be written on the fan itself, the black fan wire is ground, red may be 12V or 5V depending on the fan voltage.
Fan headers on the motherboard should be labelled so, check with a voltmeter what pin gives out what.
hi all i'm new in here and i want to ask why when i plug my ac adaptor all of usb port seems restarting, when i plug my android to usb port the phone keep reconnecting to the laptop and the hard disk make strange noise like when the laptop start, but after i unplug the ac adaptor all of the problem seems disappear, i think there is something wrong in the driver because i use win 7 in a win 8 laptop that all of the driver is only supported win 8 OS, can anyone at least give me a way to check if the driver is wrong or faulty?
Hi there .. Welcome to Seven Forums .. Can you please post your System Specs . The Link below will help you achieve this ..
System Info - See Your System Specs
My ac adapter connection is loose and flaky on my lifebook 2020.
I need to get inside and fix this. (I hope)
I have removed all the screws I can find but it dosen't seem to want to come apart easily
I dont want to force anything till I get more info.
Any help would be appreciated.
Pretty sure I can fix it if I can open it ok
Thanks for any and all responses
You will have to get it open. Look for any hidden screws or latches... Be sure to remove all memory, PCMCIA devices, CD/DVD drives and hard drives, Also, be prepared to replace the DC jack if needed
Check your power settings. Right click on an empty spot on you desktop, click on screen saver, click on change power settings, change the plan and then advanced settings. You can set the brightness intensity there and a lot of other things that you want to happen when plugged in and not plugged in.Read other 9 answers
Recently purchased the XPS 17 laptop, and first thing I noticed when I plugged in the adapter is that there is entirely too much play, it flops down and has fallen out quite a few times already. Have several other DELL laptops and those are still nice and tight even after years of use~ did they give me the wrong one?? I see no reason why a brand new plug/laptop should be this loose?
There is a simple resolution. Dell has not provided the @malkboy explanation to it phone support, engineering, tech, Terry_B or its partners.
Dell has not made an official statement regadring the design, the problem or a fix. Until then we can assume its a problem because we the customers don't like it.
@melkboy - were it the case that this is the design to prevent the cost of replacing a motherboard, etc., then Dell should so say. As it is Dell has burdened the cost of replacing my XPS17 2x, sending me an XPS 15, providing a daughterboard repalcement, 3x a new powercord and my loyalty and business. I have BEGGED to peak to someone with knowledge and no one has come forward to make your explanation.
@Terry_B has provided the best communication and there has been no communication from him to this effect.
Its a bad design, Dell's intent was not to prevent damage from tripping. Dell is running away from its customers and this problem.
Has anybody else had this problem? I have a Vostro 1500 -5 months old and Dell haa sent me a replacement AC adapter but it still has the same problem. I do move the laptop around a bit, but never pulling on the cord, and yet the plug just falls out of the jack while I am working. My adapter is Rev 03 which is pretty new, I guess. Right now I am working with someone else's adapter which is Rev 02 and seems a little more stable. Is it possible that the plugs are different?Thanks.
possibly the plug on the laptop where the cord plugs into is loose.. meaning that no matter what adapter you plug into it, being new or used, it will fall out easily..Read other 16 answers
Is it possible to prevent reset of icon size inside a folder, or to have an adaptative (to avoid having too many blank space) icon size in folders?
Another question, probably a lot easier: is it possible to avoid Windows automatic Optimize this folder for?
Welcome to Seven Forums Joljo. For the Optimize issue, this seems to be a windows thing, where even though you set everything the way you like, Windows has it's own ideas that said, have a look at the registry edit in this thread
Disable "optimize this folder for..."
It's always advised to make a system image before doing any regostry editing, or at least make a backup of the registry
Registry - Backup and Restore
As to the icon issue, I'm afraid I don't know quite what the issue is, can you explain the behaivor and what triggers it?
I have a problem . I have the LG Flatron L2320a. the box is broken.
I was using it as TV. . the cable got vga 31 pins plug i need Adapter plug from 31 to 9 or 15 pins
what I can do now ? anyone got any suggestions
Read other 16 answers
Need to know which battery plug in adapter works for Real Tec Radio Model RTL8188EE.Its a HP laptop. Missing the plug in.Read other answers
a little bit of background first. i no longer have a battery for my laptop. i can only use it when the adapter is plugged into it. yesterday i tried turning it on, but it doesnt. this morning i tried turning it on again and it turned on, for a few seconds then it died. after a few frustrating tries, i noticed that the AC adapter light would blink on and off, like it wasnt supplying power to my laptop. and because my laptop no longer has a battery, it dies. i tried to plug the adapter to another socket because i thought it was a grounded socket issue, but the same thing happens. a friend of mine suggested that it may be the radeon video card that i had got somehow fried or overheated or something, so we tried uninstalling it(yes, there was a time it stayed on long enough for me to log in and uninstall my video card). sometimes it would take 5 seconds for the AC adapter light to blink and die, sometimes it takes 5 minutes or so. after uninstalling my video card, the same thing still happens. when i turn it on, sometimes it only takes a couple of seconds before it dies. sometimes, even if i dont turn it on, the AC adapter light would go on and off, like there was something disrupting the flow of electricity from my socket to my AC adapter to my laptop that causes the light to blink on and off very fast. could it be a power supply issue?Read other answers
My Dell D800 laptop stop working.
When I plug the ac-adapter the power light goes off on the adapter. It is obvious short on the motherboard. I did took it apart and look for some problem around DC-jack, but I don't think the problem is there. All the accessories are off . It is only mobo now by it self and does same thing. Anybody knows where I should look for the short. Which chip or diode it could be? I heard it is very common problem with D800 and D600 models. Since I am pretty good with soldering I think, and it is my hobby as well I would like to repair the mobo my self instead replace. Definitely would be much cheaper as well.
Thanks in advance for any input on this matter.
Some laptops have a separate internal DC converter, and some DC converters are part of the motherboard. If you haven't tried another AC adapter, I would do that first. After replacing the AC adapter, check the DC jack for a high resistance using a good multimeter... A normal resistance would be around a half Meg ohm. If the internals are shorted, the resistance would be much lower. Unless you have the skill and tools to do surface mount soldering, I wouldn't attempt a repair
Hi. Often, not always, when I plug in a USB device to one of the external USB ports on my desktop, my (already plugged in, and working) USB wireless adapter stops working. I lose my wireless Internet connection, and I have to reset it - either manually by unplugging it and re-inserting it, or via Windows' troubleshooting wizard. Is there either a way to stop this from happening completely (preferred, of course), or is there at least a quicker way of resetting it - like a quick program on the desktop I can run - I can even code it in Visual Studio (2013) if needed). I'm assuming that the USB ports are somehow shared and conflicting? FWIW, I have 6 USB ports on the back of the machine, plus a single one on the front access panel. Win 7 Ultimate x86, 3 Gig, no errors/conflicts under Device Manager\USB controllers. Any help is appreciated. Further info upon request....
Hello JDGiants. Welcome to the forum.
Does this behavior happen no matter what port you plug the USB stick into? Even the one on the front access panel?
If this were a power problem then it would make sense that it occurs when two or more devices are drawing power from one USB controller on the motherboard.
USB2.0 can have up to 4 ports on one controller, so I'm guessing that at least 2 ports in the back are on a separate controller. By trying the wireless device in all the different ports you may be able to come up with a pattern.
You might also try experimenting with the keyboard and mouse disconnected. Report back what you find.
I have an HP Spectre X360. It has power adapter, with a right angle end (blue tip) that plugs into computer.I HATE THE RIGHT ANGLE !!! if I'm on the couch, it points down, gets extra pressure on it.if I'm on a table, it points front or back, and puts pressure because the cord wants to go to the side of the computer does anyone know of a patch cord, that would allow that adapter end to plug into, and then have a STRAIGHT blue-tip adapter end on it, so that I can relieve the pressure on this cord wire when I use it? any assistance appreciated
Hi,What is the exact model name, product number of your laptop?http://support.hp.com/in-en/document/c00033108We could help you by providing you the Manual and see if HP is listing any spare part like that for your model. No promises.RegardsVisruthRead other 1 answers
Okay, first let me apologise for the vagueness of the following post.
The jacks (or plugs? not sure of the name for it) on old headphones, some microphones, guitar cables etc... are big, as compared to most headphones you find nowadays, which have small jacks. Now, is there an adapter I can get to make the old big jacks fit into the new smaller sockets, if so, what does it look like/what is it called?
Thanks, and sorry once again for the infuriatingly vague post.
Read other 8 answers
So I like to think I'm pretty good with PCs considering i do the maintenance on my own whenever I need to. However, this computer is pretty new, about a week old. But I noticed that half the time, when i plug in my adpater to charge my laptop while I'm using it, it goes to sleep. I know it's asleep because (a) the fan stops running and (b) it's woken up quickly using typical methods to wake a computer.
Anyone got a clue about how to prevent it from auto-sleeping?
I would suggest you to update the BIOS and Video card driver on the system. Please enter your service tag # on the link below, select the OS, then download the BIOS from BIOS section and Video card driver from Video section onto the system and install it.
In addition, Please run the diagnostics on the computer by following the steps mentioned in the video below and check if there is any issue with the memory on your system.
Also, I would suggest you to run a thorough test on the system. You can download Support Assist from the link below and run the PC CHECKUP on system to check for issues
Please let me know if this helps.
As soon as i plug in battery white screen glows I removed the battery and plugged in the adapter alone still just the white screen without pressing any buttons in both casespower button is not at all functionali pressed the power button for 30 secs still no go while connecting the charger charling led glows without battry plugged in please help me with this issue asapRead other answers
My Dell 5558 go to sleep when i plug AC adapter while using it.I diagonised using all software tools provided by dell.At last I contacted dell toll free technical support and with out checking itself The technical team agent is saying that it wont go to sleep there is no way to go to sleep etc.why you calling here for this type of issues.Actually i had paid and extended warrenty.he is saying its not a issue. for people who are working on laptop who had to connect external power source while working that time its go to sleep is a issue.Please make any solution for this.atleast respect the money i had paid to dell
Wall plug was damaged during an incident of unauthorized use by one of my resident knuckleheads. The plug was snatched out of the wall but ground prong did not come with it. I would like to repair vs. replace sincere ordinarily this is such a simple fix. Unfortunately, I am unfamiliar with DELLs or their vendor's choice of wiring colors. So I'm not sure where each of the purple, blue and yellow conductors should be landed on the replacement plug.Read other answers
When plugging in the power adapter, the "charge" light does not come on, nor will the notebook power up. To rule out the HP power adapter I plugged in a Targus universal adapter (with correct polarity) and same result. Same results whether the battery is installed or not. The notebook had been in storage for several months, therefore, no recent changes. Any ideas?Read other answers
I am not sure if this is the right area, but I have browsed through all the places and sadly clueless.
I have a westinghouse flat screen monitor Model LCM 17v2ls and I cannot located the plug.
I want to use it as the temporary monitor since my MAC OS screen cracked and it costs over 300 to replace.
I went to radio shack and they could not find the right type of powerplug. I just need some direction I will also call Westinghouse on Monday but any support would be great.
Welcome to Techguy! Don't feel bad about not knowing everything; we all suffer from that. Generally, monitors either use a standard 3 prong power connector just like your computer, or an external AC adapter, i.e. a power brick. Yours uses a brick. I did a quick search online, and found at least one vendor selling them: http://www.lcdpayless.com/productpage.php?productId=4794. However I don't know them, so don't take this as an endorsement. You might also find adapters on eBay. As long as you stick with top-rated vendors, I wouldn't be afraid to buy. You can also search more online using "westinghouse LCM 17v2ls power adapter" (no quotes) as your search string.
I am installing a cd drive. I took my old one out but forgot to check which plug to the power supply I am supposed to use. There is P2, P3, and P7. Is there a certain one that is used for a cd drive?
No, any one of the standard four prong plugs should work just fine
Please help it worked fine for a while after my daughter knocked it of the side but now it won't power on
I've tried different power adapters and still does the same thing
No power makes it to the computer at all, the yellow/ green light on the power transformer just goes out when it touches the computer is there a safety switch on the mother board ?? I've tried it with everything disconnected
And still nothing
Does anyone have any suggestions ???
I just purchased an adapter plug that allows me to connect my Lenovo/IBM thinkpad (T420) to my HDTV by plugging the HDMI cord into my TV and the other end to this adapter plug which converts the HDMI cable into a male plug which fits into my display port (there is no HDMI port on this model computer). It worked, but now I can't remove the adapter plug...it's stuck in the laptop display port. I do not know if the problem is caused by the male adapter plug or the female jack in the computer, but they're locked together now.
I have previously read review comments (on these HDMI/display port adapter plugs) mentioning this jamming happening on more than a couple occasions, but I don't recall any resolutions being mentioned except to break off (and destroy) the plug and possibly damage the display port as well. I called Lenovo tech support but they said I'd have to mail the computer to them to get it fixed. I'd prefer avoiding that if possible even though my warranty is still in effect and it would be of no cost to me.....just time lost without a computer.
I'd greatly appreciate hearing from anyone who may be aware of how to resolve this problem (and also how to avoid it happening again) without doing damage to either the plug or especially the computer display port.
Thanks for your consideration in any case....
Read other 8 answers
My laptop will no longer turn on. When the AC adapter is plugged in, the LED light is white indicating power is arriving at the laptop. However, nothing happens when I push the power button. Troubleshooting steps I have completed already include: Hard reset (several times including after each step below)Tried starting without the batteryRemoved all removable components and reseated themRemoved all removable components as well as bottom cover. Cleaned with compressed air. Put everything back.Nothing appears wrong and nothing happened between the last time it turned on and this time that I am aware of. The laptop is out of warranty, and I am pretty handy with computers. Is there anything that can be suggested short of a hardware replacement that would help get this resolved? TIARead other answers
The tips I got with this Kensington 33197 power adapter have numbers stenciled on them like N3, N5, N19, etc. The tips sold on their web site make no mention of the "N" numbers and have numbers like K20059, K20050, etc. and there is no cross reference.
You can also see a complete reference for "N" numbers to all the laptops they support at the above link. Again, no mention of the numbers Kensington uses on their site.
I need a cross reference for these kinds of numbers.
Kensington referred me to their telephone tech support; but, there is a language or cultural barrier that prevents their understanding what I need.
Does anyone know of such a reference?
Read other 6 answers
I shorted out my HHD with its power plug now it wont power up. I'm sure i fried the circuit board rether HHd runs fine with that power plug.
I was just wondering if i could fix or get a new circuit board for the HHd .
I have very important info on it i need ...(TAXES) augggggg
Any help PLEASE
Read other 16 answers
Boldfisherman: My Fujitsu N3010 Power plug is broken,I am looking for Part, one repair shop wanted to sell me a complete motherboard, It is a shielded pin connector to motherboard.
I read postabout opening computershell, if I read this correctly one must remove keyboard, How?
Basically i was in the middle of putting together a computer to whihc i had previously had no prcessor, i ordered on from ebay about a week ago and today it finally came, when i realised taht i have idea where to plug in the power button on the motherboard! (which is a stock board from another computer taht was given to me by my friend). Ive put together computers before but ive always unplugged them from the previous one, thus knowing where i need to plug everything. Ive had no luck searching for it online, i was wondering wether there is a symbol were i need to plug it in or some universal way to tell where it goes, or if u can tell me where to find a guide, i just have no idea where to put this thing, heres a picture http://i16.photobucket.com/albums/b29/dashdanw/Photo546.jpg
Read other 16 answers
I have a Dell Lattitude D530. I believe it's at least three years old. I have had it for a year and everything was working fine. My children (thirteen, ten, and eight) were using it and they said the plug kept falling out of the outlet and they said there was a spark when they plugged it into the outlet but it worked after that. Then all of a sudden the laptop went black. Assuming it was out of battery power, and well past thier bedtime...they returned the laptop to me. I plugged it in and the 'transformer box' on the plug worked when I plugged it into the power outlet but as soon as I plugged it into the laptop it lost power. Hence the blue power light on the 'transformer box' went out. I have to let it sit for about 15 minutes and plugged it back into the power outlet the blue light on the 'transformer box' came back on but once again as soon as I plugged it into the computer the blue light went out again. HELP!I have a Blockbuster DVD stuck in the laptop and I don't want to break it to get it out. Luckily it isn't due for a week. LOL!
I appreciate any help you can give me.
there should be a tiny hole on the front of the DVD tray. You can insert a straightened paper clip in it and manually open the tray
As to the power problem, I am sure one of the folks with more experience will stop by and assist you.
Staff at our office have received from HP Services, replament power cords for their notebook computers. The recall information on your site informs us that if LS-15 is molded on to the plug then it needs to be replaced. My question is why did HP send us power 4 sets of power plugs all with LS-15 molded onto the plug? If these plugs were these sent in errorhow do we send back the defective plugs and get the new plugs? Thank you. Bogdan Kowalski
Hi @MAGPGT I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.Read other 2 answers
Ok... now i am having a real trouble. my Power cable to CPU fan plug is broken, not the fan, but the power to connect it to the fan(the male one). its 3 pin connector. there is one fan using 3 pin connector too from the MB (motherboard). i think its the fan for the motherboard. i am just wondering if i can use the splitter to the MB plug so i can connect it to both fan (motherboard and processor)
Are you refuring to the 4 wire Molex adapter? If so, yes use that. Well, there are no molex plugs that plug into the mobo, there is the 20pin or 24, and the 4 wire, square one. But yes, you can use the 4wire molex adapter, that would be giving cdrom/hdd/video card power.
Hello all, my power supply for my laptop quit working and i am looking for a new one. The input is 120/240, 50/60Hz and the output is 19V & 3.15A. I have found many plugs like this or very close to this with the same voltage and slightly different amperage but I am worried if I buy this over the internet the actual little round connector thing that plugs in at my lap top may physically be too big or too small. How can i determine if I am buying the right one?
Do any of them claim to be a replacement for your model? Have you searched using either your laptop model number or the power supply part number?
Many of them do use a "standard" size connector, but there are enough proprietary models around that I won't say it will work.