Over 1 million tech questions and answers.

possible infection, now can connect to router/wireless network, but does not connect to the internet

Q: possible infection, now can connect to router/wireless network, but does not connect to the internet

I have a lenovo u160 running windows 7, a couple of days ago it seemed my computer was infected with something, giving a series of security warnings I had not seen before (not av security suite). It slowed the computer down for a few minutes.

After closing these messages, there seemed to be no problem, but then my computer was no longer connect to the internet. It connects to our router/wireless network, but not to the internet.

I tried resetting and unplugging the router and the modem, but still no luck. We have two other computers on the same network that are connecting to both the network and the internet.

I tried running rkill and malwarebytes twice and no malicious items were detected.

I restored the computer to an earlier point (2-3 days earlier)

On the toolbar in the bottom right of the taskbar, it shows a 5 white signal bars, with a "!" inside a yellow triangle.
If I click on the network button it states it is "connected" to the network. It describes the connection as "excellent" (4-5/5 bars).

Above the display of the available networks, it states

"currently connected to:
Unidentified network
No Internet access"

I am not computer savvy and have not run into this problem before. Thanks for your time and help.

RELEVANCY SCORE 200
Preferred Solution: possible infection, now can connect to router/wireless network, but does not connect to the internet

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: possible infection, now can connect to router/wireless network, but does not connect to the internet

Hello,And welcome to BleepingComputer.com, before we can assist you with your question of: Am I infected? You will need to perform the following tasks and post the logs of each if you can.Malwarebytes Anti-MalwarePlease download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Full Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Click OK to close the message box and continue with the removal process.Back at the main Scanner screen:Click on the Show Results button to see a list of any malware that was found.Make sure that everything is checked, and click Remove Selected.When removal is completed, a log report will open in Notepad.The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.Copy and paste the contents of that report in your next reply. Be sure to post the complete log to include the top portion which shows MBAM's database version and your operating system.Exit MBAM when done.Note: If MBAM encounters a file that is difficult to remove, you will be asked to reboot your computer so MBAM can proceed with the disinfection process. If asked to restart the computer, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware.SUPERAntiSpyware:Please download and scan with SUPERAntiSpyware FreeDouble-click SUPERAntiSypware.exe and use the default settings for installation.An icon will be created on your desktop. Double-click that icon to launch the program.If it will not start, go to Start > All Prgrams > SUPERAntiSpyware and click on Alternate Start.If asked to update the program definitions, click "Yes". If not, update the definitions before scanning by selecting "Check for Updates". (If you encounter any problems while downloading the updates, manually download them from here. Double-click on the hyperlink for Download Installer and save SASDEFINITIONS.EXE to your desktop. Then double-click on SASDEFINITIONS.EXE to install the definitions.)In the Main Menu, click the Preferences... button.Click the "General and Startup" tab, and under Start-up Options, make sure "Start SUPERAntiSpyware when Windows starts" box is unchecked.Click the "Scanning Control" tab, and under Scanner Options, make sure the following are checked (leave all others unchecked):Close browsers before scanning.Scan for tracking cookies.Terminate memory threats before quarantining.Click the "Close" button to leave the control center screen and exit the program.Do not run a scan just yet.Reboot your computer in "Safe Mode" using the F8 method. To do this, restart your computer and after hearing your computer beep once during startup (but before the Windows icon appears) press the F8 key repeatedly. A menu will appear with several options. Use the arrow keys to navigate and select the option to run Windows in "Safe Mode".Scan with SUPERAntiSpyware as follows:Launch the program and back on the main screen, under "Scan for Harmful Software" click Scan your computer.On the left, make sure you check C:\Fixed Drive.On the right, under "Complete Scan", choose Perform Complete Scan and click "Next".After the scan is complete, a Scan Summary box will appear with potentially harmful items that were detected. Click "OK".Make sure everything has a checkmark next to it and click "Next".A notification will appear that "Quarantine and Removal is Complete". Click "OK" and then click the "Finish" button to return to the main menu.If asked if you want to reboot, click "Yes" and reboot normally.To retrieve the removal information after reboot, launch SUPERAntispyware again.Click Preferences, then click the Statistics/Logs tab.Under Scanner Logs, double-click SUPERAntiSpyware Scan Log.If there are several logs, click the current dated log and press View log. A text file will open in your default text editor.Please copy and paste the Scan Log results in your next reply.Click Close to exit the program.If you have a problem downloading, installing or getting SAS to run, try downloading and using the SUPERAntiSpyware Portable Scanner instead. Save the randomly named file (i.e. SAS_1710895.COM) to a usb drive or CD and transfer to the infected computer. Then double-click on it to launch and scan. The file is randomly named to help keep malware from blocking the scanner.Instructions:Download and scan with SUPERAntiSpyware Free for Home UsersDouble-click SUPERAntiSpyware.exe and use the default settings for installation.An icon will be created on your desktop. Double-click that icon to launch the program.If asked to update the program definitions, click "Yes". If not, update the definitions before scanning by selecting "Check for Updates". (If you encounter any problems while downloading the updates, manually download them from here. Double-click on the hyperlink for Download Installer and save SASDEFINITIONS.EXE to your desktop. Then double-click on SASDEFINITIONS.EXE to install the definitions.)In the Main Menu, click the Preferences... button.Click the Scanning Control tab.Under Scanner Options make sure the following are checked (leave all others unchecked):Close browsers before scanning.Scan for tracking cookies.Terminate memory threats before quarantining.Click the "Close" button to leave the control center screen.Back on the main screen, under "Scan for Harmful Software" click Scan your computer.On the left, make sure you check C:\Fixed Drive.On the right, under "Complete Scan", choose Perform Complete Scan.Click "Next" to start the scan. Please be patient while it scans your computer.After the scan is complete, a Scan Summary box will appear with potentially harmful items that were detected. Click "OK".Make sure everything has a checkmark next to it and click "Next".A notification will appear that "Quarantine and Removal is Complete". Click "OK" and then click the "Finish" button to return to the main menu.If asked if you want to reboot, click "Yes".To retrieve the removal information after reboot, launch SUPERAntispyware again.Click Preferences, then click the Statistics/Logs tab.Under Scanner Logs, double-click SUPERAntiSpyware Scan Log.If there are several logs, click the current dated log and press View log. A text file will open in your default text editor.Please copy and paste the Scan Log results in your next reply.Click Close to exit the program.If you have a problem downloading, installing or getting SAS to run, try downloading and using the SUPERAntiSpyware Portable Scanner instead. Save the randomly named file (i.e. SAS_1710895.COM) to a usb drive or CD and transfer to the infected computer. Then double-click on it to launch and scan. The file is randomly named to help keep malware from blocking the scanner.Now GMERGMER does not work in 64bit Mode!!!!!!Please download GMER from one of the following locations and save it to your desktop:Main Mirror
This version will download a randomly named file (Recommended)Zipped Mirror
This version will download a zip file you will need to extract first. If you use this mirror, please extract the zip file to your desktop.Disconnect from the Internet and close all running programs.Temporarily disable any real-time active protection so your security programs will not conflict with gmer's driver.Double-click on the randomly named GMER file (i.e. n7gmo46c.exe) and allow the gmer.sys driver to load if asked.Note: If you downloaded the zipped version, extract the file to its own folder such as C:\gmer and then double-click on gmer.exe.
GMER will open to the Rootkit/Malware tab and perform an automatic Full Scan when first run. (do not use the computer while the scan is in progress)If you receive a WARNING!!! about rootkit activity and are asked to fully scan your system...click NO.Now click the Scan button. If you see a rootkit warning window, click OK.When the scan is finished, click the Save... button to save the scan results to your Desktop. Save the file as gmer.log.Click the Copy button and paste the results into your next reply.Exit GMER and be sure to re-enable your anti-virus, Firewall and any other security programs you had disabled.-- If you encounter any problems, try running GMER in safe mode.-- If GMER crashes or keeps resulting in a BSODs, uncheck Devices on the right side before scanning.

Read other 13 answers
RELEVANCY SCORE 102.8

Hi guys,

I have a very annoying problem. I am on a wireless network. We're getting the connection from a floor below, usually the signal is pretty good. I can always connect to the router, but once in awhile, it just won't give me internet access. Like right now for example...I'm using my roommate's computer which sits on the same wall as my computer, just on the other side. Yet for some reason, I can't access the internet. It shows me as connected in the network connections though.

Any idea where to start here? It is driving me absolutely nuts!
 

A:Wireless Network: Can connect to the router, but no internet signal...

Read other 16 answers
RELEVANCY SCORE 101.6

Hi all,

I am having a huge problem that needs to get fixed asap as I have classes starting tuesday (2 days from now) and I will need my own computer to be back and running so I don't fail miserably in school, so here's my dilemma.

My sister had downloaded a trojan by accident virtumonde.prx like 2 weeks ago and today my computer wouldnt boot to windows at all so I had to reinstall everything, that went all fine and smooth up until the part where I tried to connect to the wireless internet (password protected) here at home.

The big problem is, I try to connect and the password for our router is 15 digits long and when i try to enter a password for the windows xp network for it, it says it can only be 10 digits or 13 digits, hexidecimal and some ascii thing i think.

I don't think it even has sp1 or 2 as its not listed under the add/remove programs section and I do not have a spare usb hard drive or flash drive on hand big enough to download one on another computer to transfer to mine.

Is there anyway that I can connect to my password protected network? maybe I am doing something wrong or maybe I need to have the service packs or something?

Please help me asap as my college classes are starting soon and I am just very stressed out not knowing how I can take my online classes without being online!!

Thanks in advance,

Rob

I will be monitoring this thread every few minutes in the hopes that you computer savvy folks can save me!

Thanks again

A:Reinstalled Windows XP Pro and can not connect to wireless router/network/internet

Are you sure you are trying to connect to your router and not another one . . the router should tell the network adaptor what level of protection it is using.


Have you installed the newest driver for the network adaptor?

Right click on My Computer and select properties . . it will tell you the SP level.

You may have to update to SP3 to get wireless networking right:

If you have no service packs, you will have to install SP1a first

You can download SP1 here and install on the other pc:

http://www.microsoft.com/downloads/d...displaylang=en

Then you can go straight to SP3:

http://www.microsoft.com/downloads/d...displaylang=en

( ignore the warnings about being only for network admins )

See if your wireless works ok then

Read other 6 answers
RELEVANCY SCORE 100.8

I just connected a linksys WRT54G version 8 wireless G router to a desktop computer in my apartment that's directly connected to the internet via cable. I have a desktop pc in the next room with a WUSB11 version 2.6 linksys adapter. I'm trying to connect to the main computer's internet connection. When I first set up the router, everything worked fine. The second computer was connected with the wireless adapter. As soon as I secured the network, that second computer couldn't connect anymore. I've tried both WPA and WEP, and my wireless connection settings on the second computer are configured correctly according to the linksys site and various other places with instructions on the web. I've rebooted my router, reset passwords, tried disabling that wireless zero thing in windows administration tools I've read about online, and looking through every option on that linksys router website (http://192.168.1.1). Any more suggestions? I'm a Windows XP home user.
 

A:Solved: can't connect to internet via wireless adapter AFTER securing network with new router

Just so we're clear. If you disable encryption on the link, you connect fine, but any encryption on the router inhibits the wireless machine from connecting?

Have you tried using only WZC and not the adapter's wireless client?
 

Read other 1 answers
RELEVANCY SCORE 100

Hi there, I'm having a bit of an issue with one of my computers. It's fairly new, running on Windows Vista.

I am able to connect to a wireless router (Belkin), but I am not able to connect to the internet on this one particular computer. Another desktop computer on the network is able to access the internet. I just get the error "Internet Explorer cannot display the page" on the laptop whenever I attempt to open IE.
I've read through quite a few similar problems on other sites, but have yielded no solution. Any suggestions?
 

A:Able to connect to wireless router, but unable to connect to the internet.

Read other 7 answers
RELEVANCY SCORE 98.4

Have a USB wireless WiFi unit. To connect to the Internet. Have to disable the Local Area Connection. When connected to the Internet. If I enable the Local Area Connection. Unable to connect to the Internet. When I disable the LAC, the Internet connection is restablished. Using a D-Link boradband VPN router.
 

A:Wireless Network Connection will only connect to Internet if Lcl Area Connect disable

sounds about right! Your big issue will be the VPN, as it is frequently specifically
config'd to use a specific adaptor AND to force all tcp traffic thru that connection,
even though you want to do some trivial google.com search.

Consider using a Hardware Profile to define
1) a LAN connection environment (ie no WiFi)
2) a WiFi environment (w/o a LAN)

the choice occurs at boot time and the hardware is enabled/disabled per
the profile.
 

Read other 1 answers
RELEVANCY SCORE 98

I feel bad for starting a new thread on the subject, but I looked through a bunch of the other threads and I couldn't find a solution.

I am on a Dell Laptop (Latitude D600)
And I'm running Windows XP Ver 5.1 Service Pack 3
My ISP is Speedlink Cable
We are using an SMC modem/router SMC8014WN

My roommate can connect to wirelessly, and I can connect with a hard wire connection. I also can connect to the router (full speed), but I get limited or no connectivity to the internet.

I connect to the wireless via a 'NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter' using the NETGEAR SMART WIZARD - Wireless Assistant WG111v2

When I run IPCONFIG /ALL the output is:

Windows IP Configuration
Host Name . . . . . . . . . . . . : GOAT2
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 570x Gigabit Integrated Controller
Physical Address. . . . . . . . . : 00-0D-56-DC-55-46
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.0.11
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . .... Read more

A:Can connect to wireless router BUT cannot connect to internet :(

Try putting static IP addresses in to your wireless network connection.
By the looks of it it seems your wireless connection cannot get an IP address automatically via DHCP.

Let me know if this works or you need help doing this.

Read other 12 answers
RELEVANCY SCORE 95.2

Hi I need a little assistance. I am on a dell laptop running Windows XP Pro SP2. This is my mothers laptop and I have no clue what she did with it. OK, so I have an IP address, connected to Wireless network, can ping DNS Server, DHCP server, and Default Gateway. Tried the Winsock reset and the int ip reset. Also IPconfig release and renew. Haven't gone into the registry yet (Kinda nervous don't wanna mess anything else up. Need specific instructions). Uninstalled and reinstalled drivers (found online). Ran into a whole different set of problems and error messages, but I've gotten all those resolved already. I connected a LAN line with still no luck. I even installed Firefox. With all that done it still won't connect to the internet. I've used up all my tech savvy\expertise and I'm at a lost. Anything else you can think of that I can try? Thanks in advance
 

A:Can connect to wireless network, but can't connect to internet.

Read other 11 answers
RELEVANCY SCORE 93.2

I have a wireless network, and I restored my computer. I finally got my card's correct drivers installed and everything, and it worked before because I went to "manually connect to wireless networks" but that option is no longer there! What?? how do i get it back? I know how to get there, but it isn't there!
 

A:Help! Don't see "Manually Connect to Wireless Network" and can't connect to my router

Are you using the "classic" start menu. If so, the "connect to" option disappears.

Use the standard startup menu and click "connect to"

Good Luck
 

Read other 1 answers
RELEVANCY SCORE 91.2

Hey guys, currently I have a modem and wireless router next to the family desktop, but the signal is not strong enough for me to get wireless internet on my laptop at the opposite end of the house (where my room is )

I borrowed a friends signal boosting aerial (can't remember the model sorry) to test out whether that helped, but the signal was still not strong enough and faded out alot.

I would like to purchase a gaming desktop for my room to play online games, so was wondering if it is possible to connect a second wireless router in a different location in the house so that the range covers the whole house? The outcome I am searching for here is that I can plug this gaming desktop directly into the second router and use my laptop wirelessly anywhere in the house. Is this possible? Could you also recommend a good "G" router? I don't need a really expensive one with a heap of features either, just a good reliable signal.

Thanks in advance!

P.S. I'm not sure how well I explained what I was after so just left me know if anything needs clarifying

Does setting it up like this sound good to you guys that are more knowledgeable than me?
http://www.ehow.com/how_4527815_two-routers-one-home-network.html
 

A:Is it possible to connect a second wireless router to the same network?

you want

Code:
modem===router#1 - - - - wifi - - - - router#2-----gaming system
this is called a BRIDGE connection and usually only available with an Access Point, and infrequently in routers.

Of course you know that gaming is intensive and WiFi is restrictive. A wired connection,
perhaps via the attic, would give better results.
 

Read other 5 answers
RELEVANCY SCORE 91.2

I just bought a D-Link DIR-655 wirless router here at the company. I assign a static IP address to the router along with the DNS server addresses and it works great with many laptops here. But I'm having one laptop cannot connect to the network, it could connect to the internet but NOT the network. The laptop is also has a unique static IP address.

Any reasons why?
 

A:Wireless router cannot connect to network

Is the laptop that cant connect joined to the domain or workgroup.
Any other info you can provide would be great.
OS's....ipconfig of non-working laptop......ipconfig of working laptop......
 

Read other 3 answers
RELEVANCY SCORE 90.8

Hey guys, need some urgent help here.

I have a program on my computer called Intel(R) My WiFi Technology, which has something to do with my network adapter (Intel (R) WiFi Link 1000 BGN). I recently had an annoying notice popping up from this program saying 'The Wireless Network Adaptoor could not be found'. So I decided that I should find a solution on Intel's forums. I came across a thread that discussed my problem, and one of the Intel workers mentioned that Uninstalling and Reinstalling the program would be the best solution. So I followed the steps and came across a huge problem . Turns out that once I removed this program, my computer wouldn't connect to my wireless network in my house. I went onto my other devices throughout the home and they all seemed to be working fine, and that my router was still working fine aswell. I went onto my other computer and downloaded the program onto my USB, and installed it back onto my original computer. There still wasn't any difference, and my computer still currently can't connect to my wireless access point. I've rolled back drivers, updated them, and I've refreshed wireless network adapters in my Network and Sharing Center in Control Point. I'm starting to run out of ideas, and I really need some help. My computer can still detect networks though, but I've discovered it can connect to my Mobile Phone's Access Point, meaning I can connect to 3G through my phone. I'm sus... Read more

A:Uninstalled/Reinstalled Wireless Network Adapter - Can't connect to Wireless Router

Make sure you have the latest wireless driver from your laptop manufacturer's web site.

Delete all wireless profiles. Then try again to connect.

Please attach a screen shot of the Networks page of the Xirrus Wi-Fi Inspector and show ...

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 1 answers
RELEVANCY SCORE 90.4

Hi everyone: Iím having an extremely frustrating problem connecting to my Netgear DG384G v3 wireless router in my flat.

In short:

Ever since I reformatted my hard drive and reinstalled Windows XP Pro, internet browsers do not detect a connection to the internet despite a wireless connection being detected in the network connections (and the icon in the system tray) when my wireless adapter is plugged into my PC. Connection problems only occurred after the reformat, another PC in my flat connects wirelessly to our router with no problems (before, during & after the time I reformatted; Iím posting this using his PC) and the router config settings have definitely not been changed in any way so its not a router problem. It appears that the wireless adapter is able to detect a signal from the router but the router is not sending information to the adapter (I canít even connect to the router setup IP address 192.168.0.1)?

More detailed:

1) I wiped the PCís harddrive then reinstalled Windows XP Pro Ė I thought the recovery disk would have drivers with it (like others Iíd used) but it didnít so I had to manually find nVidia chipset & 3com Ethernet controller drivers and SP1 (for USB 2.0 functionality), download them on another PC and transfer and install them on mine. I got SP2, this didnít change anything, I changed back to SP1, still no change to connectivity.

2) When my Netgear WG111 v2 wireless adapter is plugged into a USB port, Windows recognises it as a d... Read more

A:Can't connect to net despite wireless adapter connecting to router's wireless network

Read other 16 answers
RELEVANCY SCORE 90

Hi all,
i have some problem with my wireless connectivity,
When i try to connect to a wireless network, it keep saying "Unable to Connect to X" (let's assume the network name is X)

When using network troubleshooter,
it recommend me to turn off the router, keep it for 10 secs, and turn it back on,
i've done so, but the problem still there
and then the troubleshooter say there're some problem on the access point or the network adapter (Intel WiFi Link 5100 AGN)

but it seems no problem with other networks and all laptops except this S57B works fine..

and the strangest of all is: somtimes it works fine, and sometimes disconnected + unable to connect.

What possibly causing the problem?

Additional Info:
BenQ Joybook S57B
OS: Win 7 Ultimate x86 (Upgrade ver. from Vista Home)
Network Security Type is WEP

Thx in advance

A:Win 7 unable to connect to wireless network(router)

I have had trouble adding a separate cisco switch and a wireless router onto the comcast cable router. I have the phone and internet. After running a PING test I saw the speed was significantly slowed down by 1/4 due to the netgear wireless router. So I unplugged that and bought a non-wireless cisco router that did not slow the speed down. Now I need a wireless router as my wife bought a Ipodtouch. Don't waist your money on one of these, get the real ipod phone! Just a note! These are worthless if you can't get online! Only good for photo's, Music, and videos downloaded onto it. Back to the wireless network problem. The main router needs to have multiple ports or the DNS will not work. I am guessing you are running more then 1 router inline.

Read other 3 answers
RELEVANCY SCORE 89.6

 
prior to downloading the Windows 7 service pack 2 I had windows 7 basic that connected to the internet with out any issues. After istallation I no longer had the option to manually connect to a wireless network or set up a wireless router or access point
or ad hoc. It will only let me have dial up/lan/vpn there is no wlan anywhere? I can't access the internet on that computer so I have no idea how to fix it. How can I manually add a wireless network if I dont have the option?

A:Don't have the option to manually connect to a wireless network or set up a wireless router or access point or ad hoc after installing Windows 7 service pack 1

Reinstall your wireless network card driver to the latest one.
And refer to this:
Setting up a wireless network
Regards,
MiyaMiya Yao
TechNet Community Support

Read other 3 answers
RELEVANCY SCORE 89.2
A:Solved: One Router, Two PC's with a Wireless Network Card - How to Connect Both to Ro

Read other 10 answers
RELEVANCY SCORE 88.8

I have an wireless/4 port adsl router/bridge. 2 PCs (running XP) are plugged directly into the router and are working perfectly.
The 3rd machine (Windows 98SE) was plugged in and also working, but I have now moved it and installed a wireless adaptor. The wireless network is working OK - PC 3 can detect the other 2 machines on the network & vice versa, but it won't access the internet (can't find server/DNS error).
I've checked all the TCP/IP settings and they look fine, I've rebooted (machine itself & router), I've removed the TCP/IP protocols and reinstated them, but the problem still remains. The machine can ping itself but it doesn't receive a reply when pinging the router.
Any ideas? It's driving me mad!

Thanks.
 

A:can't connect to internet via wireless router

I've got it working! I did ipconfig/release_all then ipconfig/renew_all.
 

Read other 1 answers
RELEVANCY SCORE 88.8

This is definitely my last resort. I've been trying for days to get my router to work, but it just isn't. Here's the details:

I have a D-Link WBR-2310 router. I have an Efficient Networks (< ?) SpeedStream modem. My computer is running Windows XP.

I can set up a home network and connect with other computers/devices easily, but I can't connect to the internet when I have the router hooked up. The wired PC can't even connect. I've read that I need to change the IP Address to a different one than my modem, because my modem is a router too? Something like that...

Anyway, I really don't know what I'm doing, so a step by step would be more than wonderful.

Thanks so much, guys.
 

A:Cannot connect to the internet through my wireless router.

Read other 8 answers
RELEVANCY SCORE 88.8

Hi, I am a University living in halls and my flat mates and I want to set up a wireless router for our flat.

I have a TP-Link WA500G, routers are not allowed but other people have from neighbouring flats have set them up as I can see at least 3 now.
I have set up a password and selected it to be a Wireless AP.

Each room has it's own ethernet socket and that socket has a unique IP, Like 141.163.180.XXX
Do I have to enter the IP that it is plugged into into any of the fields like gateway or in the DHCP settings?

Or do I have to enable WMM, AP Isolation or disable short preamble?

Thanks
 

A:Wireless router won't connect to the internet.

Read other 7 answers
RELEVANCY SCORE 88.8

I'm at my brothers house for a few months and trying to get my laptop connected wirelessly to his network.

They have multiple computers and their laptops all are able to connect wirelessly. My laptop is able to connect via cable. It also gets a local connection wirelessly, just won't connect to the internet so I'm assuming it's a setting on my computer. It's a Linksys E3000 router. I have an HP G60-235DX laptop running Windows Vista Home Premium.

Any help would be greatly appreciated!
 

A:Can't connect to internet with wireless router

Read other 14 answers
RELEVANCY SCORE 88.8

I have a zyxel prestige 600 ADSL modem. I bought a TP-LINK WR541G wireless router. Tried to connect the PC through the router to the modem. however i cannot access the internet.

The ip address for both the router and modem are the same (192.168.1.1). could this be causing the problem?
the default gateway address is the same as the modem and the router (192.168.1.1). Could this be causing the problem?

i really can't think of anything else...

Appreciate any help.

ethan.
 

A:Cannot Connect to Internet via Wireless Router

Read other 16 answers
RELEVANCY SCORE 88.8

Hi Guys,

I'm new, so please be gentle ;o)

I have a Dell Vostro laptop running windows 7. My ISP is a company called Scarlet which supply connection via an external modem complete with aerial. When I connect directly from the modem to the laptop via the modem it's fine.

My problem is that I bought an Advantek wireless router which a friend tried to install, I'm not sure if he was successful at any point as it was some time ago. However, I am now trying to set the wireless connection up so that I can surf on the laptop and my girlfriend on her ipad in separate rooms.
I currently haven't got as far as getting the laptop to work along with the modem and router, I think there may be an IP conflict.

What info do you guys need in order to assist me or won't a wireless router work with an external wireless connection via my ISP?

Many thanks in advance.

Monty123.
 

A:Wireless Router cannot connect to internet

Read other 16 answers
RELEVANCY SCORE 88.8

I recently purchased a Belkin F5D7230-4 Wireless G Router and connected it to a Dell Dimension 4600 PC. All wires are connected properly, with an ethernet cord going from my Surfboard Cable Modem to the wireless router and from the router to the PC. All lights on the router appear to be on, EXCEPT for the "connection" light which blinks continuously. I can connect to the internet fine with the modem goes straight to the computer but not when the router is in between. Belkin, Charter, and Microsoft are all baffled regarding this issue, and each thinks that the other is at fault.

My system is running Norton Firewall software, but I don't think that this is the problem because I installed it after I was having the problem. When I look at the router's "security log" on the settings page, it shows a the router (255.255.255.0) being denied to connection to "10.232.64.1" over and over again every few seconds. So I wonder if it just cannot connect to my ISP?

I will be very plea$ed if someone could help me with this as I would like to have wireless internet in my house. Thank you so much.

Best,
Ben
 

A:Wireless Router cannot connect to internet

Read other 12 answers
RELEVANCY SCORE 88.8

I have a Netgear wgt624 wireless router. I tried creating a home wireless network, but I can't connect to the internet with my laptop. I can connect to the router perfectly fine (computer shows excellent 54.0 mbps connection on the task bar), and I can connect to the router settings page. I tried connecting the router to the laptop with an ethernet cable and it still didnt work. I tired connecting my home PC directly to the router and the net still won't work. If I unplug the router and connect it directly to my laptop, it works fine. Can anyone offer any advice for this issue? (I've tried resetting the router). Thanks.
 

A:Wireless Router won't connect to the internet

Did you power cycle the broadband modem? When you change the device connected to it, you MUST cycle power on the modem.
 

Read other 3 answers
RELEVANCY SCORE 88.8

hey guys, i have a BR-6524N Edimax Wireless Router and i accidentally pushed the reset button, be4 this a computer technician came and set it up, so i need some help getting it back to the way it was

there's an Ethernet cable hooked up to the WAN port of the router from my modem

a 2nd Ethernet cable from a computer(not my computer) hooked into "1" of my router

a cable from the wall hooked up into "2" of my router--didn't know why the main internet cord is plugged in here where a computer Ethernet cable would normally be

and finally there's my Ethernet cable from my computer plugged into "3" of the router

also we have a "Sting" satellite receiver that somehow gets internet from here, maybe that's the cord plugged into "2" of the router, im not sure

so i need to no how to set up my wireless router to get back internet to all these locations

i have the router's installation cd also, after it asks me for the host name and mac address, i put clone and apply, then it tries to connect and it cant, i reset back to factory default and everything
 

A:cant connect to the internet through my wireless router

Read other 6 answers
RELEVANCY SCORE 88.8

k first post here tell me if i do something wrong or you need mroe info or w/e

i have internet connected to my computer with a ethernet but resently baught a laptop
and want itnernet on both so have got myslef a wireless router connected my modem into it and conected my computer to it with a ethernet and i can only get local acsses conection. also when i try to connect my laptop with wireles i can connect to the router but same problem no internet connection. any help would be nice thnx.
 

A:Can't connect to internet with wireless router

Install problem Too difficult to tell you how online... Try to find an exprienced computer hobbyist, and get him or her to work it up properly for a six pack or a bottle of wine.
 

Read other 2 answers
RELEVANCY SCORE 88.8

Problem:

I can't seem to be able to connect to the internet on my laptop through my new wireless router.
I can, very slowly, connect to google and do a search, but that's about it.
I wasn't able to make it work with any other pages (get the following error message:
"internet explorer cannot diplay the webpage").
Background:

I recently got DSL from AT&T and purchased the wireless router that AT&T was offering.
Was able to connect it to my pc without a problem, have good access to the internet.
Now I got an older laptop I'm trying to connect through the wireless gateway.
Had to purchase an adapter, and installed it.
Followed the instructions from my ISP and from 2WIRE (the gateway manuf.) to set up the gateway on the laptop.
I am aparently able to connect to the wireless router (I can see it on the laptop, and it shows as associated w/ good reception).

I connected the laptop directly to the router through DSL wire and was able to get on the internet without a problem.
My PC that's currently connected directly doesn't have any problems.
I haven't tried other wireless connections... I don't have any other laptop or anything...
I have a (non-wireless) printer connected to the PC; I can print from the laptop to that printer (through the wireless connection).
I appreciate all your help! I don't know much about all this and am trying to learn as I go;
but there's obviously something wrong that's wa... Read more

A:Can't connect to internet thru wireless router

Read other 16 answers
RELEVANCY SCORE 88.8

Hi,
I have the exact same problem with my high-speed-mode wireless G router F5D7231-4.
the connection LED won't stay on, and no internet for me, but I have internet on 1 of the 4 wired computers, not on the other 3 and not on the wireless one's. And another thing: I can acces the router (192.168.2.1) only on my wireless laptop not on any wired computer, not even on the comuter where I have internet. This is getting realy weird?
Any suggestions?

Malik
 

A:Wireless Router cannot connect to internet

Welcome, malik, but please start a new thread.

This doesn't sound like the same problem. In the new thread tell us about your connections (your cable or DSL modem is connected to the "WAN" or "Modem" or "Internet" port on your router?). Also tell us if you set up the router with automatic software or did it manually.
 

Read other 2 answers
RELEVANCY SCORE 88.8

I have a D-Link DIR-600 N Wireless Router, connected to a Comcast Cable Modem. 3 of 4 computers in our house connected just fine to the network and have internet access. The 4th computer has a D-Link DWA-525 wireless transceiver. It will hookup to the network but will not connect to the internet. I've changed from autodetect DNS and Default gateway to an explicit IP address for the IP address, Default gateway and Devault DNS address based on the settings from ipconfig on one of the other computers that is on the web. I've used ipconfig/release ipconfig/flushdns ipconfig/renew to no avail, and now I'm getting an error message from it.

Is it possible that the DWA-525 itself is faulty, or am I missing something? It shouldn't be this hard to connect to the router and get DHCP to pickup the current gateway IP address.

Any ideas would be appreciated.

Cheers!

[email protected]
 

Read other answers
RELEVANCY SCORE 88.8

I have a Dell Inspiron running Windows XP. After upgrading to SP3, I can no longer connect to the internet, via a Linksys router, using IE or Firefox. I CAN connect with AOL. I can nenew my IP with no problem. I've cleared and flushed as well as reset my IP stacks and catalogs. What makes AOL browser allow me in? Any help? Thanks.
 

A:Only connect internet wireless router using AOL

Read other 10 answers
RELEVANCY SCORE 88.8

This is the idea, I have DVR for CCTV and I need to configure it for port forwarding, and since it has only LAN connection it is not possible to connect in pocket wifi, so i used to have a wireless router since it has a LAN connection. But I do not know how to do this connection as the wireless router to be a bridge in my pocket wifi to DVR, Anyone know how to do this? Thanks!
 

A:How to connect pocket wifi to wireless router, to connect the dvr for cctv?

I'm not at all sure I understand. Are you trying to use the wireless router as a Wireless Bridge (to connect to the pocket wifi via wireless and the DVR via ethernet)? If so, does the router have wireless bridge (or AP Client) mode?
 

Read other 1 answers
RELEVANCY SCORE 87.6

Bit of an odd problem here, hoping someone could offer solutions until I have access to the router settings.
So, I just moved into the 3rd floor of a house here in Boston. I have a desktop, and so I have always used ethernet cables. Unfortunately, the router is on the second floor of the home here, and it's impossible for me to run a cable, so I went out and purchased a wireless adapter (netgear n300). The adapter is great, not a problem. The problem is, when scanning for networks, I can see his router, which is using WEP. I connect, but it refuses to acquire an ip. I can connect to other networks fine, just not the one I need. The man who lives downstairs won't be home for a few hours, so I won't have access to the router until then. I have tried to get to the router from my desktop, but 192.168.0.1/1.1 don't seem to be working, so I have no idea what the default ip could be. Are there any other possible explanations for why this could be happening? Also, what should I do in the router settings when I get access later on tonight?

Any help is severely appreciated!
 

A:Solved: Can't connect to wireless router.. but can connect to other networks..?

Read other 8 answers
RELEVANCY SCORE 87.6

I have a Belkin wireless router that fails to connect to the internet which is the final step in the installation process. All the connections are correct. It will try to connect to the internet up to ten times but still there is no connection. I called Belkin Tech Support and they talked me through several steps so finally they told me to send the router back and they would send another one. I received that one but had the same problem. They told me to send that one back and they would send another one. I did that but the same problem. They told me to send that one back and they would send another one, still the same problem. I plan to keep this one because the cost for shipping them back is expensive. Each time they said they would send an upgrade. I even tried installing it on my wife's laptop but still the same problem. I called my internet service provider and they told me several things to try which didn't work. The dsl modem works fine when I connect directly to my computer. I typed cmd in the Run block and at the black screen I typed ipconfig which showed the IP address. I tried typing in the IP address and also tried clicking on Obtain an IP address automatically. Any help would be appreciated.
 

A:Belkin wireless router can't connect to internet

Read other 8 answers
RELEVANCY SCORE 87.6

We got a new ISP today and now I'm trying to get the router to work but it's not working with me. The modem works when hooking the computer up directly through the ethernet cable but when I try the wireless router it's no bueno. It's running through a Static IP address.

I get full signal from the router but I don't get any internet through it. My IPv4 is "Local" and my IPv6 is "Limited." Disabled the IPv6 but it didn't really change anything. I looked through a few other threads with similar problems but none of them really fixed my problems.

1) Tried the Winsock reset
2) Tried disabling the security
3) Made sure the cables weren't faulty
4) Factory reset on router
5) Firmware upgrade on the router
6) Ipconfig /renew
7) Tried automatically finding the IP address/DNS and my own set IP address/DNS's

Here's my ipconfig and pings:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

Wired Connection

C:\Users\Holzer>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Holzer-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : domain.invalid

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : domain.invalid
Description . . . . . . . . . . . : Atheros L1 Gigabit ... Read more

A:[SOLVED] Can't connect to internet through wireless router

Turn of the computer. Unplug the modem and router wait 3 mins. Plug back in the modem and router. Wait for all the lights to stabilize. Turn the PC back on.


Quote:




Wireless Connection

C:\Users\Holzer>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Holzer-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : domain.invalid




Dns suffix search List (domain.invalid) seems odd.

Did you try running COMMAND Prompt "As an Administrator" then typing?


Code:
Ipconfig /Release
Ipconfig /Flushdns
Ipconfig /Renew

Read other 10 answers
RELEVANCY SCORE 87.6

Plain and simple I want to replace my old DIR-615 v4 d-link router with my new WRT160N v3 linksys router. The thing that I did was I simply disconnected my old one and plugged in my WRT, my Laptop detects it but it wont connect to the internet. Can anyone give me a step by step tutorial on how to make it work? Also I'd like to use my old wifi username and password on my new router so I dont confuse all my other family members with the new router. Thanks in advance.
 

A:New Wireless Router Wont Connect to Internet

theres a dir-615 emulator online here
http://support.dlink.com/emulators/dir615_revB/221/login.htm

a versin 3 emulator here
http://ui.linksys.com/files/WRT160N/v3/3.0.00/

how is the old one setup and have you checked the new one has the same settings

you can also see how to set the wireless up
if you goto wireless
basic wireless settings - you can set up the SSID - wireless name to be the same
and also
goto wireless security and set up the password
 

Read other 3 answers
RELEVANCY SCORE 87.6

OK, first off I'm a newbie to this forum, so hello all. And I'm also pretty much a newbie to Vista also, but know XP alot, so should be able to go along with any help. Here's the problem:
I had someone move into my old office & his computer (Dell, Vista Home, 1gbRam, 160GBhd, nVidia network controller) is now going to be the one wired directly into the router & modem with the rest of the 3 comps in the house getting wireless signal as they had been for the past 2 years.

When I first plugged his comp in & installed the Netgear router from the disk, the install screwed up in that his comp was getting the internet cause it was plugged via ethernet, but the rest of the house couldn't cause there was no wireless signal. Also shown by the wireless light not being on on the router, but all the other were, power, LAN port4, & internet.

So I uninstalled the router since wasn't working correctly unplugged it all from the comp to restart fresh.

Went and did the install again, but now the wired in comp is not getting any kind of internet signal at all either being plugged directly into the modem, directly into the router, or even trying use one of the wireless USB adapters that are running on the other comps just fine, on it right now, but even that way there was something not allowing it to install correctly and get an internet signal, just kept saying can connect to a local network but not to the internet, rebuild this, blah blah blah.

Som... Read more

A:Cant connect to Internet either wireless or plugged into router, PLZ HELP!

Read other 16 answers
RELEVANCY SCORE 87.6

I have two static IP internet accounts through DSL. Currently I have a wireless access point that works fine with my two computers.

Purchased a NETGEAR wireless router (dual band WGU624 a and g; same brand as access point) so I can get rid of one static IP and add additional computers to the network as I please.

Initially couldn't get the thing configured because of problems with login to router. Ended up re-installing my OS and moving everything away from my cordless phone

So now I can login to the router through the wireless connection and configure appropriately. I was able to get to the internet everything looked ok. Came back later that day no connection. Spent several hours troubleshooting including resetting the router to default settings and reconfiguring several times. Could never get back to the internet. Tried pinging my ISP DNS server but no dice. Can ping the router from my computer. Router shows my computer as connected to the network with an ip that is within the range the router can assign. Spent several more hours today but no dice

Could this be a problem with a "noisy" phone line? My ISP also tried to configure the router remotely and mentioned that the phone line was very noisy.

Has anyone ever heard of incompatibility of modem and router (my modem is an infinilink i500)?

Unfortunately I dragged my feet getting this configured so have gone past the "free support" from NETGEAR and they want $30 to talk to a tech support person.... Read more

A:Wireless Router fails to connect to Internet

Read other 9 answers
RELEVANCY SCORE 87.6

I am only 16 and this is my first time to deal with routers. I was just given a Belkin router (specs posted at the end) i know for a fact it works because i used it on this very laptop for 3 days before bringing it home. However, when i plugged it in the first two lights ( wired, router) light up blue within 5 seconds but the third light for the modem has been blinking orange for about 2 hours. the desktop that it is wired to says that there is an internet connection but i cannot seem to get access to any website other than the router setup. and my laptop will connect to it but it wont access internet either. i really have no idea.i reset my modem at one point and while the modem was booting up the modem light on the router turned blue and the internet light began to flash. this lasted about 10 seconds(long enough to get my hopes up) but then just went back to a flashing modem LED when the modem finished resetting (crushing my hopes). one last thing i feel i should tell you, on the router setup page, at the top it says Home| Help | Logout Internet Status: No Connection i am at my wits ends with the thing. the previous owner has no clue. and i am at a loss. please help me out!!
Specs from under the router (copied word for word)

N Wireless router
Model No. F5D8233-4
ver.1022

i've been through countless forums and emailed belkin i dont even know how many times. please someone help me
 

A:Wireless N Belkin Router won't connect to internet?

Have you entered the right details from your isp into the router ?
 

Read other 2 answers
RELEVANCY SCORE 86.8

I set up the router perfectly and 2 of my friends can connect to the internet perfectly even through mobile phone, but i cant connect through mine laptop samsung r60, i was able to connect when it was without password ,but when i put it on i wasnt, it showed, that i am not able to connect to preferd network, but i am able to connect to other networks even at school where we have wireless network.. so what i have to fix? i have windows xp sp 3
 

A:Cant connect to internet with Neatgear wireless router MR814 v3

Describe the encryption you are using.
 

Read other 2 answers
RELEVANCY SCORE 86.8

After months of paying $55 a month for Comcast cable, I've decided to give cheaper Qwest DSL a try. My cable setup is D-Link DCM-202 cable modem -> Vonage VT1005V voice terminal -> Netgear MR814v2 wireless router. With cable service my Vonage worked fine as did the wireless router/internet for my laptop.

I just replaced the cable service with Qwest DSL (with GT701 DSL modem). DSL works fine if I connect my laptop directly to the DSL modem. When I add the Vonage modem and the wireless router, I can't get to internet anymore (wireless). Vonage still works fine and I can access the wireless router from my laptop, but can't get to internet.

Any help would be appriciated.
 

A:Can't connect to internet using Qwest DSL/Netgear wireless router

Read other 9 answers
RELEVANCY SCORE 86.8

Day 2 of Cox High Speed Internet Premier Service.
Laptop 1: Macbook - OS 10.6.4
Laptop 2: Toshiba - WindowsVista
Modem: Best Data CMX300V2
Router: Belkin Wireless G Router
I was able to wirelessly connect 2 laptops and my PS3 momentarily yesterday by adding the password to the SSID ( first day of service) but have not been able to connect since. I added the network to my PS3 yesterday and was able to save, however, anytime i try and get online i get an error message: "The key information exchange timed out. The WPA key you entered may not be correct.

A wired Ethernet connection between the computer and the modem (CMX300v2) works and you can access the Internet.

A wired Ethernet connection between the computer and the Belkin Wireless G Router works and you can access the Internet.

The Belkin Wireless G Router broadcast and shows a good signal strength but when prompted for the password, the connection times out.

Could this be an IP issue? Setting each machine with its own IP address help? I can login to my router admin page http://192.168.2.1 to make adjustments. I am just not sure what the issue is here.

Thanks!
 

A:Wireless router is showing it is connected but still can't connect to internet

Read other 8 answers
RELEVANCY SCORE 86.8

Been trying to sort out my mother in law's laptop for about 2 hours and need some help.

Its a Toshiba laptop and she has a d-link 2680 wireless router. The laptop will successfully connect to the internet through an ethernet cable, and will connect to the wireless network fine but when wireless i cannot access the internet. I have an iphone which connects to the wireless network and accesses the web perfectly.

I have tried everything I can think of and find online to try and talktalk tech support won't help as its a hardware setup issue. Please see the dump of the ipconfig /all below

Can anyone help!!

Windows IP Configuration
Host Name . . . . . . . . . . . . : Barbara-laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : dlink.com
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . : dlink.com
Description . . . . . . . . . . . : Atheros AR5007EG Wireless Network Ad
apter
Physical Address. . . . . . . . . : 00-26-B6-21-16-5F
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
Lease Obtained. . . . . . . . . . : 23 February 2013... Read more

A:d-link 2680 wireless router - can connect but no internet

I have seen this a few times and 1 had a virus that stopped it from working on wireless but would work on Ethernet.
There are also a few malware that can do it to.
I suggest down loading the free anti malware removal software and running a full scan.
 

Read other 2 answers
RELEVANCY SCORE 86.8

Hi I just purchased an LG P500 phone with android 2.2. I am having no luck connecting the phone to the internet at home. I travel and in a hotel I can connect to the internet no problem. When I scan and connect the phone finds the network and connects, I am then asked for the login ID and pass word from the hotel and I am connected. So far no problem. When I get home I want to connect the phone to the internet so I scan for my wireless router. The phone and the router see each other, the router asks for the router WEP pass word I input it and the phone connects, no problem. I try to go on the internet and the phone tells me no connection.

This is likely because my connection is through the phone line, I have ADSL. When I connect with my laptop either wireless or with cable at my desk, I connect with the router using the WEP and then when I connect to the internet I use my login ID and pass word for the IP provider. Therfore my problem is that the smart phone can't get to the internet becasure I haven't logged in to the provider.

I have looked and looked but I can't find anything on the smartphone about sending or keying the User ID and PW for the internet service I have. Is it me or is this a limitation of my setup?

Thanks in advance for any info.

Louie....
 

A:Connect Smart Phone to Internet via wireless router

Read other 8 answers
RELEVANCY SCORE 86.8

I have an IBM ThinkCenter running XP Professional, connected to the internet and another computer via an ADSL modem and ethernet router. I am trying to replace the ethernet connections with a Linksys WRT 54G wireless router.

The installation seemed to go fine, but I get no internet connection. The only help from the Linksys setup routine was a suggestion that the ISP may have trouble identifying the modem when the wireless router is attached.

The IPConnect output when connected through the ethernet is ...

Windows IP Configuration

Host Name . . . . . . . . . . . . : IBM
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : lan

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : lan
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection
Physical Address. . . . . . . . . : 00-0D-60-24-F1-8D
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 209.42.192.253
209.42.192.252
Lease Obtained. . . . . . . . . . : Tuesday, October 07, 2008 3:36:02 PM
Lease Expires . . . . . . . . . . : Wednesday, October 08, 2008 3:36:02 AM

When using the wireless ... Read more

A:Solved: Problem getting wireless router to connect to internet

Read other 14 answers
RELEVANCY SCORE 86.8

hi please help,
i have a wireless router model :TL-WR340G
and an EMTA cable modem with ISP:TPG

i am able to connect on the wireless network but unable to connect to the internet.
all the ethernet cables are plugged in correctly.

how do i connect to the internet?
 

A:wireless router to connect internet by EMTA modem

Read other 9 answers
RELEVANCY SCORE 86.8

For the past week I have had a wireless connection and a wired connection to my router, I cant connect to the internet. Also all of my roommates are able to connect to the internet. I have also tried the TCP/IP Repair stack options but that didnt work. Could anybody please help me out??
 

A:Have a Wired & Wireless Connection to Router but Cant Connect to Internet

Read other 11 answers