Over 1 million tech questions and answers.

Once PC goes to sleep, will not wake up

Q: Once PC goes to sleep, will not wake up

Hi group,When my PC (HP Pavilion) goes into "idle" - when I'm not using it - it will not wake back up. I get no video, and sometimes my mouse will not wake up either. When I disconnect my power cord and reconnect the computer, I am able to boot up and things work. The computer works fine as long as I don't let it go to idle. For example, when I shut it down, it will boot up fine the next time. This just started happening recently after two updates: one from Norton, and the other from Quicken. I have no idea whether one of these caused the problem. I keep my PC well-maintained with all the latest updates. I have run the power troubleshooter, as well as the updates troubleshooter, and both detected no problems. Open to any ideas you may have,Thanks,Jeff

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Once PC goes to sleep, will not wake up

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 67.6

My PC is fairly new and I'm having problems with slow shutdowns/restarts and slow sleep/wakes. Recently it seems to fail waking altogether and restarts after a while instead. Usually during waking I just have a black screen for a long time before the reset/restart but sometimes I see the Windows log-in screen but it's unresponsive.
The problem predates my CPU undervolting and doesn't seem to change when I switch RAM settings back to Auto instead of XMP (I my RAM necessitates some kind of overclock in order to function at its rated speed).

Can anyone advise how to proceed? Thanks.
System specification below. This forum has a fantastic design that eliminates the form of pasted lists of information. That's just great for preventing people from reading it. I was worried someone might have read this information.
OS: Win 10 Pro 64-bitMainboard: ASUS Z170 Pro GamingCPU: Intel i7 6700 (6th gen), Stock HSF, Undervolt Offset -0.15 V, LLC 4RAM: Corsair LPX Vengeance 2x8GB DDR4-3000 (CMK16GX4M2B3000C15)Graphics: Gigabyte NVIDIA GeForce GTX 950Sys Drive: Samsung Evo 750 SSD, 250 GBData Drives: OCZ Vertex 2 SSD, 60 GB; WDC WD1002FAEX-00Y9A0, ~1 TB; WDC WD2003FZEX-00Z4SA0, ~2 TB; WDC WD2002FAEX-00MJRA0, ~2 TB; RAID 0, ~300 GB [Maxtor 6B160MO x 2]PSU: XFX TS 750W (P1-750S-NLB9)Bluetooth: Parani UD100 Bluetooth USB AdapterMonitor: LG 21.5" W2246S-BF 16:9 Wide LCD Monitor 1920x1080 5msLogitech G500 mouse, K120 keyboard.UEFI BIOS divergence from optimised default settingsAI Overclock Tune... Read more

Read other answers
RELEVANCY SCORE 67.2

W7 PC wakes up from sleep every few minutes. It didn't use to. I am the builder / owner / sole user. Investigation done so far at the DOS prompt to establish the cause:

powercfg -devicequery wake_armed
(no results returned)

powercfg -waketimers
There are no active wake timers in the system

powercfg -lastwakeWake History Count - 1
Wake History [0]
Wake Source Count - 0Other ideas to try and establish the cause with please?

Many thanks.

Read other answers
RELEVANCY SCORE 61.6

Hi,

I am new here. Hoping someone can help me out with this issue. I work in IT so am not a complete computer bonehead and am at my wits end with this.

My laptop is about 4 years old, it's a toshiba. For whatever reason, it started taking 5+ minutes to wake up from sleeping. If it sleeps for an hour, it's OK.. but if you leave it sleep all night and try to wake it up in the morning, it's quite cranky. After the 5+ minute wake up, it performs as normal. It was running Windows 7 Home 32 bit.

Troubleshooting steps that I have taken are as follows.

Reinstalled windows. Issue was resolved! but after about 2-3 weeks, issue came back. I thought maybe it was some type of windows update, so I reinstalled windows again and paid closer attention to the updates. Issue presented itself again after 2-3 weeks, and there were no updates immediately done prior to it starting.

I started to think maybe it was something related to my hard drive, so i performed laptop surgery and swapped out my original hard drive with a solid slate drive, and installed windows 7 Ultimate 64 bit (this laptop can support 64 bit so I figured why not upgrade.).

issue again was resolved for a few weeks, and now it's back to taking 5+ minutes to wake up again.

If you're turning the laptop on from scratch, it takes 10-15 seconds tops. if you're restarting, it's 10-15 seconds tops (man, I love SSD...)... if you're waking itup within the hour, its 1-2 seconds. But anything longer then that, 5+ minutes.

It ba... Read more

A:Laptop extremely slow to wake up from sleep mode, 5+ minutes to wake

Hi there, have you ran any malware/anti virus scans?

Read other 9 answers
RELEVANCY SCORE 61.2

I have a Dell Optiplex 755 with WinXPPro SP3, 2GB RAM and an Intel Core 2 Duo E4600, and it is unreliable for Wake on LAN and Wake on Ring. I also wonder whether my Standby - Sleep - Suspend (S1 or S3) is working correctly.

When the PC is in Standby - Sleep - Suspend mode (S1 or S3), Wake on LAN and Wake on Ring work some of the time but not all of the time, and I'd like them to be 100% reliable.

These may be two different problems, but your advice will be appreciated. (Also, if I should post in a different forum, please advise.)

My Network Card is an Intel 82566DM-2 Gigabit Network Connection, and I recently upgraded its drivers using "generic" PROXP.exe from the Intel website, although this has not helped the problem. The specific driver file e1e5132.sys is now from 2009 -- it used to be from 2007. But, as I say, Wake on LAN from Standby was not and is still not reliable, both before and after the driver update.

In Settings .. Network Connections ... Local Area Connections ... Properties ... Configure ... Power Management, all the Wake on LAN options are checked ON:

- Wake on Directed Packet
- Wake on Magic Packet
- Wake on Magic Packet from Power Off State
- Wake on Link

The NIC card's Diagnostic checks are all OK.

My fax modem card is a Conexant D850 PCI V.92 Modem, and I have the most recent drivers dated 7/27/07, version 7.67.0.50. In Settings ... Phone and Modem Options ... Modems ... Properties, "Allow this device to bring... Read more

A:Trouble with Wake on Ring, Wake on LAN and Standby - Sleep - Suspend

More to above: Dell has suggested I must re-install Windows. I've never done that, and I realize I'd probably lose all my applications and data - no good. Seems to me that's like using an atomic bomb to kill a mosquito. And why should I assume that will work?

But is there a way to re-install -- or maybe fix -- Windows that leaves everything else safe?

FYI - About a month or so ago, I ran SFC (System File Checker) in repair mode, and that didn't help with this problem.

Any ideas?

Read other 1 answers
RELEVANCY SCORE 57.2

Whether I choose any option other than to turn PC off, instead of tapping spacebar on my MS wireless keyboard I have to tap the button for power on the tower, then the monitor turns on as the fan runs, but always a black screen. So then I have to do a manual boot and select to start normally.
 
Started a week ago, around the same time as a graphics card failure. I installed a new PNY GeForce, updated ALL drivers on my Gateway DX4710-UB301A, (Win 7 Home Premium 64-bit, AVG antivirus free 2014) played with power management and startup config settings, trolled forums, performed malware scans, and still can't figure out the issue. 
 
Please help!

Read other answers
RELEVANCY SCORE 57.2

I have an issue with the sleep function. The computer does not awake from sleep. When I try to do it, it behaves as if it was waking, but it never ends and there is only a black screen; the mouse and keyboard are inoperative. The only thing possible to do is a hard reboot. When it boots, it shows a notice with a minute report (in the zip file) usually saying there was a blue screen, but I NEVER see any blue screen at all.

I know the power configuration is OK because I have always used the same scheme. A powercfg ?energy report shows several errors and warnings. They refer to USB and PCI (vendor 1002=ATI motherboard), but I don?t know how to repair them.

I downloaded the drivers downloader from Rrecipester.org and downloaded and installed the drivers. They are all Broadcom Corporation signed, the brand of my USB Bluetoth attachment. I rebooted after installing, as recommended. Run powercfg ?energy again and got the same report issues (in the zip file). I don?t think the processor utilization warnings to be very important because they are low and sporadic picks. It has been like this for some time now, so I don?t have a restore point. Can someone help and tell me what I can do so solve this issue, please?

Files uploaded in the attached zip:
. Windows warning after reboot
. Windows dump and xml files (2 = 1 each)
. Powercfg -energy report
I wanted to correct the thread title, but was unable to do it. Maybe someone else can do it.

A:No Wake From Sleep BlockedI have an issue with the sleep function. T

Quite confident it's a driver issue, it will be very difficult to troubleshoot from the one included dump file though as it's incomplete and inconclusive.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

BAD_POOL_CALLER (c2)
The current thread is making a bad pool request. Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 000000000000109b, (reserved)
Arg3: 0000000004440006, Memory contents of the pool block
Arg4: fffffa8007c481b0, Address of the block of pool being deallocated

Debugging Details:
------------------

***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.

Cannot get _POOL_TRACKER_BIG_PAGES type size
Cannot get _POOL_TRACKER_BIG_PAGES type size

POOL_ADDRESS: fffffa8007c481b0

BUGCHECK_STR: 0xc2_7

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffffa80036544e0 to fffff800038c2d40

STACK_TEXT:
fffff800`00b9c360 fffffa80`036544e0 : 00000000`00000000 00000000`000007ff fffffa80`... Read more

Read other 9 answers
RELEVANCY SCORE 51.6

Hi, I was wondering if anybody has had this problem before?

My computer was put to sleep earlier on today, and I moved the mouse to turn it back on. The power light went from orange (sleep mode) to blue (powered on). Nothing was displayed on the machine. Bashed some buttons, nothing happened, so did a hard reboot.

The power button went red (which happens if I hard reboot it) then to blue but that's it. The fans and hard drive starts going, but no beeps, no POST, no display. Nothing.

Already, I've tried:

- Reseating my RAM sticks - nothing
- Unplugging the hard drive - bf actually broke a sata slot, although he says it was lose before. The pins are not straight now and I can't get the black slot back onto the mobo. Plugged hard drive into sata 2 slot, still get no reaction.

Anything else I can try?
 

A:Can't wake up from sleep.

Try clearing CMOS, see if that helps.

http://time4tech.com/article25.html
 

Read other 3 answers
RELEVANCY SCORE 51.6

Hi all,
I have win 7 x64 running on a custom built machine. Every now and then the machine freezes up when I try to wake it up from sleep (usually overnight). I have not made changes to make it hybernate. I experienced this again last night and am wondering if I could get some help analyzing this minidump as I don't know how to analyze it.

Any help will be appreciated.

Thanks!

A:win 7 won't wake up after sleep

Hello IndianinIA,

I wonder if that was caused by your network driver. Try uninstalling and reinstalling that driver, e1e6032e.sys, and make sure that you get the latest version.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Jonathan\Desktop\020810-18921-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a00000 PsLoadedModuleList = 0xfffff800`02c3de50
Debug session time: Sun Feb 7 23:28:12.828 2010 (GMT-5)
System Uptime: 0 days 13:16:53.125
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Read other 9 answers
RELEVANCY SCORE 51.6

help please...
i just added 2 gig of ram to my lappy.(it was originally using 2 gig)
Since added i realised that windows is having trouble waking from sleep especially if i leave it to sleep for some time ( about an hour of sleep time) when i try to wake it it justs seems to lose power and dies or the fans just keep spinning but nothing happens.... nand i have run windows memory diagnostics... it doesnt seem to detect any problem with the ram..

A:Cant Wake From Sleep

  
Quote: Originally Posted by manusdn7


help please...
i just added 2 gig of ram to my lappy.(it was originally using 2 gig)
Since added i realised that windows is having trouble waking from sleep especially if i leave it to sleep for some time ( about an hour of sleep time) when i try to wake it it justs seems to lose power and dies or the fans just keep spinning but nothing happens.... nand i have run windows memory diagnostics... it doesnt seem to detect any problem with the ram..



Hi manusdn7 and welcome

The windows memory test does not stress your memory enough to tell, plus it is run from within windows.

You need to run memtestx86

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember that memtest errors can be either memory or bad motherboard slots so you may have to test memory one stick at a time, and the slots with known good memory.

Let us know if you need further assistance
Jan

Read other 5 answers
RELEVANCY SCORE 51.6

I try hitting the power button, nothing. I have to restart, it takes a long time to read the hd's in bios, then when it restarts there is no network connection, so I need to restart again.

no real pattern to this, sometimes I leave the machine on all night and no problems, other times just a couple hours and it happens.

I am also using a wireless mouse/kb if that makes a difference.
bp

A:win 8 goes to sleep (i think) and won't wake up

Originally Posted by badperson


I try hitting the power button, nothing. I have to restart, it takes a long time to read the hd's in bios, then when it restarts there is no network connection, so I need to restart again.

no real pattern to this, sometimes I leave the machine on all night and no problems, other times just a couple hours and it happens.

I am also using a wireless mouse/kb if that makes a difference.
bp



I think you switch to second screen try to plug-in the second monitor and switch only PC screen only

Read other 3 answers
RELEVANCY SCORE 51.6

Since installing SP1 my computer has been acting like a one year old. When I put it to sleep at night it keeps waking and then goes to sleep only to wake again. Left untouched it went through this cycle all night. Starts 20 seconds after I put it to sleep and stays on for 2 minutes and then goes to sleep for 20 seconds then wake for two minutes etc etc etc.I disconnected a flash drive that I had in a USB port.
I disabled "wake timers" under Sleep in Power Options
I disabled "allow this device to wake the computer" in the properties of the USB wireless mouse
In the properties for the network adapter under the "Advanced" tab I disabled the "Wake on Settings". That fixed the problem but then I couldn't wake my computer with Logmein and I think Orb is disabled.
Noticed when I went back that there's another tab "Power Control" for network adapter. I disabled "allow this device to wake the computer" and changed the Advanced tab "Wake on setting" to "OS controlled".
Now when I put it to sleep it seems to stay down. I'll update tomorrow if it misbehaves tonight.

A:Sleep Wake Sleep Wake

If you think it might be the network card, you can always open a cmd prompt and run powercfg -lastwake to see which device was logged as waking the machine last.

Read other 3 answers
RELEVANCY SCORE 51.6

So it sleeps no bother normally but it seems that if my htpc has woken it with a wol magic packet, it will not go back to sleep , ever unless manually put to sleep. Rebooting and automatic sleep works again. I recently reinstalled windows and have looked atvevery setting I can think of. Including unattended sleep timeoutvin gpedit which I have tried not config and set to one min. Powercfg shows nothing.

A:no sleep after wake on lan

I have been searching the internet and it seems that this situation is unique.

To clarify, sleep works fine but if the computer is woken with a magic packet from any source it does not then go back to sleep after inactivity. Even the monitor stays on.

In gpedit I have tried disabling allow applications to prevent sleep under power options with no change.

Anybody got any ideas, this is driving me crackers!

Read other 9 answers
RELEVANCY SCORE 51.6

Greetings.  I have a T61 that won't wake from sleep. Situation:Put PC to "sleep" using Fn+F4, closing lid or let it go to "sleep" via system timerPC will not wake upon opening lid, using Fn+F4 or power button.We're forced to either 1) hold down power button (which forces a reboot), or 2) (when that fails), unplug from wall AND remove battery.System:T61, 7664 RYU, Bios 7LETC6WW (2.26)VistaAll Microsoft and Lenovo patches installed and current Notes:Don't have a restore point we can refer back to.Don't want to have to burn it down and start over.My hunch is that there is a conflict somewhere in the registry (maybe between what the bios thinks and what the registry has)?I'll PayPal you $25 if your solution fixes it....  Seriously. Many thanks.  

A:T61 Won't Wake From Sleep

Hi, I have the same problem and have tried all the fixes...none work.  If you get a solution please let me know! Thanks,[email protected]

Read other 4 answers
RELEVANCY SCORE 51.6

Hi,
I've been running Windows 7 Ultimate for the better part of a year now. For about the last week or so now, my computer is going in to (what I assume is) sleep mode at the most inopportune moments. No amount of anything will wake the computer from its sleep - not the keyboard, mouse, ethernet activity (which should keep it from falling asleep in the first place) - only a hard reboot will bring my PC back to a state where I can use it.

Some of the things I've tried, so that people don't answer with "change your power plan settings" or some such thing. If it was that easy, I wouldn't be here asking for help. I'll restate that I've been using the same Win7 Ultimate install on the same PC for a year now, and it's only in the last week this has been happening.

Anyways, I have:
Verified all my power plan settings;
Disabled any screen saver;
This is an older desktop, not a laptop, so hibernate and hybrid sleep options are not even present. Nevertheless, I've followed this guide and this one for disabling both.
Used device manager to specify my keyboard, mouse, and ethernet card as "wake up" devices. Also used the command line to manually set these as "wake from any state", only to have them all not work.
Tried changing group policy and eliminating sleep/hibernate from the user group.
As I said, it's only been doing this for a week or so now. All my drivers are current. All my system updates are current. I haven't installed any new software. I was ... Read more

A:A sleep I can't wake up from.

Did you try system restore? Actually sounds like a bad power supply. Good luck to you.

Read other 4 answers
RELEVANCY SCORE 51.6

My computer can go to sleep mode. But upon wake up, it will stuck there with no video signal. I can see the fans are moving, cd and hd seems working. I have the latest bios installed and have tried different settings. Any thoughts?
This is my spec:
MSI Neo2 P35 with intel e2180
evga 8600gts
4gb ram.

A:Help with sleep wake up

Do you also have the latest driver for your video card?

Read other 9 answers
RELEVANCY SCORE 51.6

My computer will go into sleep mode (sleep, hibernate, and all power off settings in the power setting are disabled) and it will not wake up. Preform a hard reboot and it beeps once every second without getting through post. Leave it alone for a few days and it's fine boots as normal. Last for a day or two then happens again. Any one got any ideas?

A:Sleep will not wake

Hi @Cbwesson, and thank you for your post.Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that your computer is not waking properly from sleep. I am happy to help with this. Please post the full product number and operating system in use on your computer. See the following, if you need help with that information.How Do I Find My Model Number or Product Number?Is the Windows Version on My Computer 32-bit or 64-bit? For now and assuming that you are using Windows 10, give this a try: HP PCs - Sleep and Hibernate Issues (Windows 10, 8), and let me know how it goes. I look forward to seeing your response, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.

Read other 6 answers
RELEVANCY SCORE 51.6

driver me crazy:
my PC details :
MB : GIGA X38-DQ6 BIOS F9a
Menory: G.Skill DDR800 (1+2G) X2 =6 G 4-4-4-12
CPU: E6550
Harddisk : WD 3200YS
Vedio Card: LeadTeck PX8800GT
I can not stand 8800GT's 100% fan noice , so I order AC S1 (Rev2) heatsink to replace old one, replcace is good, the noice is down, and also control the temp to 43 degree,
then the story comes: I find VISTA Home P 64 SP1 Can Sleep , but when I try to wake up , the PC , CPU(Fan), Hardisk , VedioCard fan start working , but the LCD have no signal, and Wireless Keybord and mouse does not work .
I reinstall chip (MB)drivers and vedio card drivers ... ... still same problem.
I change DELL 2407 to Philips 190P stll no siginal...

I change BIOS From S3 to S1 , yes, it can wake up, but I need S3 !!!
I check the Device Manger, and find SYSTEM DEVICES -> PCI Bus Properties general say working properly, BUT resources menory range conflicts
pls. see the picsorry it is Chinese ) :
Powercfg /a says system support S3:


I am sorry my OS is Chinese, but I can NOT find answer from China, pls. help, if you guys need transfer into English, just let me know!
one more pic from DM:

A:S3 STR Sleep Can NOT Wake up

Hi Wufawutian,

Check this Tutorial for solving sleep problems...

Power Options and Sleep Mode Problems

Let me know the results
Steven

Read other 5 answers
RELEVANCY SCORE 51.6

HI all I have just  tried my Yoga 520  in tablet mode. great!  I tmporarily sent it to sleep with the power button.. quick press. I later pressed the power button briefly again and up came the normal lock screen.. I could not log in to open the session though.. I had to turn it back to laptop mode and either use the finger reader or pin. You have to do that everytime in tablet mode..? I'm willing to learn what others are or 'i should be doing.

Read other answers
RELEVANCY SCORE 51.6

Hi Guys/Gals

Never use sleep function but last night instead of selecting shutdown hit sleep by mistake. Couldn't get system to wake from sleep and had to turn off by holding power button.

Today when switching system back on i get fan & case lights on , hdd and dvd activity. The keyboard is unresponsive (no lights) and monitor remains in stand by. Mouse gets power but doesn't wake pc.

Using reset or power button on case just restarts system to exact condition above.

Can't contact pc manufacturer til monday (pc 4 months old). Read quite a few other posts regarding vista sleep issues but haven't found anything that would seem to rectify this problem.

Any comments/tips gratefully recieved

Karlos

A:Can't Wake PC From Sleep

Well I'm a beginner but I had a lesser important case than yours. I found you interupt a process of sleep if you try to wake it before about 5 seconds. Anyway, there are a couple of things you can try.

Unplug the power cord and plug it back in.

Pull out the wall socket thingy and put it back in.

Try doing something like booting into safe mode if you can.
The pc maybe still functioning but the monitor can't interact with it. Once you try to boot it, keep pressing F8 for about 10 seconds and then press enter. See if anything happens.

Could also be a shortcircut or something. Other people have had a similar problem.

Read other 12 answers
RELEVANCY SCORE 51.6

Having struggled to get my computer to sleep -

When I do a wake up from 'Sleep' I get - Windows did not shut down correctly.
It then offers the 'Safe Options' list,

Anyone know why it does this?

A:Wake up from sleep

Does the power remain connected to the PC?

Read other 5 answers
RELEVANCY SCORE 51.6

Hi,

Hoping someone can help me with this.

I installed 7RC a couple of months ago. Since then whenever my pc sleeps I can not wake it up. It used to wake up fine in XP.

To get it going again I have to cold reboot or pull the plug. When it comes back up everything I was doing is still there, I just have to enter my password.

I think I have all the settings right but if someone could run me through everything that needs to be set I'd be really grateful.

Thanks in advance.


Rich

A:PC Won't wake from sleep

Mine is the same and takes about 2 and a half mins to wake up

I have my bios set to wake up on double mouse click, it does wake up eventually

Should be fixed in the official release!!

Read other 9 answers
RELEVANCY SCORE 51.6

Hello Eight Forums,

New HP Notebook. One month power on. W8.1 64bit

Setup with Classic Shell and Fast Startup Off

Have to decide next week. If I should return for new machine exchange or keep with two known issues.

1) Sleeps on timer okay. Just cannot wake from Sleep. Tap space bar. Black screen goes gray. Times to black.
Noticed ethernet lite not on. Plug is clear plastic with white led normally on and on during startup.

Suspect power to NIC not satisfied so, no wake from Sleep. Have to force shutdown. Startup is normal. Forced shutdown is not flagged prompting startup options.

2) igfx Tray Module has stopped working pops dialog box on some startups.

HP and I have been round and round. HP wants me to contact Microsoft. We all know that's not fun. HP is bad enough. Always leaving remote session with machine worse for the experience.

HP went through settings and drivers. HP un-installed, re-installed over-installed and updated drivers till they were exhausted. Using HP Support Assistant and pulling soft paks from HP.com.
Then came the requisite System Recovery. Then came more BS.

Yesterday, after a Device Manager graphics driver un-install / install. Windows Update offered it's two cents with an Intel HD Graphics update.

I can return to Staples for new same machine. No harm. No foul. No cost. New warranty period.

Machine worked no issues afaik for two weeks. Then BIOS and UEFI manual pull updates via HP Support Assistant. No issues.... Read more

A:New W8.1 cannot wake from Sleep

Geez, not even a Welcome

HP referred me to Microsoft. Microsoft referred me back to HP
M$ did offer me fee based support. No guarantee my system would not be left as a door stop.

So, whose responsible here. HP the vendor of M$
Or, M$ the author of W8
Or, Intel
Or, one of the umpteen needless Windows apps that came pre-installed.

If I want Netflix. I can get em' without a Tile.
If I want the weather...well, you can follow where I'm going.......................

Not even a Welcome ~

Read other 4 answers
RELEVANCY SCORE 51.6

I'm running Snow Leopard on my iMac which is wirelessly connected to the house's router with Airport. The PC is connected directly to the router with the ethernet cable. It is a fairly new computer, running Windows 7. It is an Acer, 2.something GHz processor. Is there any software that I can use on my mac to wake up my PC remotely from my Mac? Thank you.
 

A:Can I Wake My PC From Sleep From My Mac?

Wake on Lan is just a magic packets to notify any WOL capable nic and computer to turn on or wake up. Just Google search for OS x wol.
http://www.readpixel.com/wakeonlan/
 

Read other 1 answers
RELEVANCY SCORE 51.6

1st system
Windows 7 x64 7600 clean install, intel e6550 cpu, intel 965g motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more mornitors, 1.5gb memory

- no problems going to sleep or waking up, using either S1 or S3 as sleep state in bios

2nd system
Windows 7 x64 7600 clean install, intel i5 750 cpu, gigabyte p55-md80 motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more monitors, 4gb memory

- no problems going to sleep or waking up, using S1 as sleep state in bios

- no problem going to sleep using S3, however cannot wake up from S3 sleep. Pressing the power button produces a normal reboot instead of a wake up.

System 2 can sleep and wake up normally when using just the nvidia 6200. It is only when the 4670 video card is used in system 2 that S3 sleep becomes an issue. Doesn't matter if its by itself or paired with the 6200.

I have tried every sleep tweak suggested here in terms of modifying bios settings and advanced power settings. I've tried the radeon driver 9.9, 9.5, and 9.3 for win7 64. There are many reports of S3 issues with MSI motherboards in general, as well as with win7 ati drivers. Open to any suggestions. Thanks

A:Cannot wake from S3 Sleep

  
Quote: Originally Posted by johnhoh


1st system
Windows 7 x64 7600 clean install, intel e6550 cpu, intel 965g motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more mornitors, 1.5gb memory

- no problems going to sleep or waking up, using either S1 or S3 as sleep state in bios

2nd system
Windows 7 x64 7600 clean install, intel i5 750 cpu, gigabyte p55-md80 motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more monitors, 4gb memory

- no problems going to sleep or waking up, using S1 as sleep state in bios

- no problem going to sleep using S3, however cannot wake up from S3 sleep. Pressing the power button produces a normal reboot instead of a wake up.

System 2 can sleep and wake up normally when using just the nvidia 6200. It is only when the 4670 video card is used in system 2 that S3 sleep becomes an issue. Doesn't matter if its by itself or paired with the 6200.

I have tried every sleep tweak suggested here in terms of modifying bios settings and advanced power settings. I've tried the radeon driver 9.9, 9.5, and 9.3 for win7 64. There are many reports of S3 issues with MSI motherboards in general, as well as with win7 ati drivers. Open to any suggestions. Thanks


Hi,

Try Standby Tool, it solved all my S3 problems.
Here is the version for Win7.
In the post you'll see "mst09098.exe".

http://www.degroeneknop.nl/forum/ind....htm... Read more

Read other 4 answers
RELEVANCY SCORE 51.6

hi-i am trying to enable wake my computer from sleep using the keyboard or mouse.i have checked all of the bios settings and neccessary power settings are all enabled.i ran the power-cfg cmd to check if my computer will allow itself to use these,and it stated that i could using s1 setting.however it still wont work.i checked on the internet,and one forum suggested it could be that i should check the option under usb root hub-"allow this device to wake computer from sleep".i cannot check any of these options as the box is grayed out.can anyone help?

A:wake from sleep

It may be that one or more devices in your system is/are not compatible with sleep mode, hence those options are greyed out.

Read other 1 answers
RELEVANCY SCORE 51.6

My Vista PC keeps going into sleep mode, or closes down. When I start it up again, it gets to a black screen saying continue restore, or re-start. Sometimes I get a blue screen with some sort of loading message on it, but on re-booting, it's ok. I 'googled' the sleep mode problem, and on one link it said it is commonly and registry error, and I needed to download a program to fix it. Can anyone help with the solution. Thanks.
 

A:Wake from sleep

Read other 7 answers
RELEVANCY SCORE 51.6

I am using a wake on lan app on my ipod so i can wake my computer from sleep. Im running into a problem though. When i go into configure my network adapter, and go to the power management tab, if "allow the computer to turn of this device to save power" is unchecked, the app works, but when the computer comes back on it cant connect to the internet, if it is checked, the app doesnt work, but when the computer turns back on the internet works. Any ideas on how to solve this problem, so the internet will work when it wakes and the app will work, thanks!

A:help with sleep / wake on lan

Actually i dont think the internet is working with either setting. After short periods, like 5 minutes or less, the internet still works, but after longer periods, when i wake it the network has limited connectivity or doesnt work entirely.

Read other 2 answers
RELEVANCY SCORE 51.6

Hi guys, srry haven't been to tech support guy for awhile, in case if i miss any information, feel free to remind me
and i'll post it asap.

My laptop is about 2 years old (Acer Aspire 6920), one day like any normal day i was away from my laptop
and it went to sleep. The next time i was using it i tried to wake it up, it froze for around 10 mins, so i tried to
restart it and the next thing i knew it only starts up to "startup repair". Any attempts to access safe mode to
debug the computer has failed and since then the laptop has gone on a loop -->fail to repair in startup repair
--> restart computer again --> running startup repair. So i decided to reinstall the OS.

after reformatting and reinstalling windows 7 to my laptop though, i seem to encounter a similar error. The laptop
seems to work fine although whenever it goes to sleep and i try to wake it up, the screen froze and starts
flashing and the laptop wont work until you restart the computer again. I made my second attempt to reinstall
a new OS to the system and the same error occurred. My laptop has the latest bios and i tried various versions
of drivers for my graphics card (intel 965 chipset) and the problem continues to persist.

I was wondering if there's any program to debug this error or whether this is a hardware error that i can somehow detect.

Thanks!

Acer Aspire 6920
Windows 7 32 bit operation system
 

A:Cant Wake up from Sleep

bump
 

Read other 1 answers
RELEVANCY SCORE 51.6

Hi All,
   My boss just bought a XPS 15 9550 last September.  There are a few cases each week that it does not wake up from sleep.  All drivers are up to date.  I did an online check with Dell for hardware check and all seems fine.
The computer goes into some state that the screen is black, the computer is running and there is nothing else but holding the power button down to restart it.

It's frustrating. 

A:Cant wake up from Sleep

Hi,
Thank you for writing to us!
We would like to apologize for the inconvenience caused.
In this case we would suggest you to update the BIOS to the latest version. Also update the chipset drivers on the system ( un-install -> restart system -> install ).
Kindly private message the service tag and email address.
Thanks
Robin

Read other 1 answers
RELEVANCY SCORE 50.8

I am randomly facing a BSOD when my PC wakes from sleep. This usually happens when Windows goes to sleep automatically and then I try to wake it after a while. However when I put my PC into sleep manually I don't face the issue when it resumes again. I really appreciate if someone can help me resolve this issue.

I suspected it was a NVIDIA driver issue so I updated and downgraded but the issue still remains. I am currently on version 326.80.

A:BSOD After Wake from Sleep

Only 79 Windows Updates installed. Most systems have 100 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

You have a 802.11n USB Wireless LAN Card:





I do not recommend using wireless USB network devices. Especially in Win7/Win8 systems.
These wireless USB devices have many issues with Win7(and I suspect with Win8) - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7/Win8 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



This could also be a problem with the video card(s). Please try the suggestions here: Video TDR Timeout - 0x116 + 0x117 - Sysnative Forums Don't forget the video stress tests here: Hardware Diagnostics

With only 1 memory dump it's difficult to figure if this is a hardware problem or not. Normally we need at least 5 memory dumps to venture a guess about a hardware problem. I suspect hardware here (due to the involvement of hal.dll in the dump) but cannot be certain at this point.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

AsUpIO.sy... Read more

Read other 6 answers
RELEVANCY SCORE 50.8

I have a dell 15 r.  when I put it to sleep, then wake it up, the power light is steady, instead of fading in and out.  the computer does not wake up.  when I hold down the power button to restart it, it does not even make the usual shutting down noises, like the hard drive stopping.  any ideas as to what could be causing this?

A:laptop does not wake from sleep

Not sure if this would help but have you seen this link?

Read other 5 answers
RELEVANCY SCORE 50.8

About 1/2 the time, computer will wake up from sleep, but the monitor will not. The only way I know to get it fully back is to reboot. I have tried all the sleep combinations available, but nothing works except not allowing it to sleep at all. Help!!

Read other answers
RELEVANCY SCORE 50.8

Hello, I have done lots of eliminating so hopefully someone out there has the real solution for this. I have Vista Home Premium 64bit SP2. If I choose SLEEP mode it is my MONITOR that won't re-wake. When in sleep, I touch the mouse or keyboard and my CPU DOES re-wake, because I can hear the fan kick back on and the light on it lites back up, but a signal is not sent to wake the monitor. I thought it might be the video cards (I have 2 cards) so Dell replaced both under my warranty. I have made sure the video card drivers have been updated, in fact a newest published driver is only 2 weeks old. I then had Dell replace the monitor too, but that was not it either. So I have done lots of eliminating with hardware and drivers but nothing helps, so I'm thinking it has something to do with VISTA not sending a signal from the mouse/keyboard or even the CPU to tell the monitor to wake up! Even if I press the power button on the monitor, it will light up for a few seconds and then give the message "entering power save mode" and go back to black. It is like the monitor has been told 'you are in power save mode - stay there'. Lastly, another site suggested that some mice/keyboard software have an option to choose them to allow them to send a signal to wake monitor from sleep, but there is no type of choice for that on mine that I find.

Read other answers
RELEVANCY SCORE 50.8

When I either close my lid or press the power button, my Vista laptop activates sleep mode. From which it WILL NOT wake up from sleep mode. I need to remove the battery and put in back in then restart the computer. I just had my laptop sent in and the motherboard was replaced because my network port was bent. It never happened before it went in but it does now.

Any ideas?

THANKS IN ADVANCE!
Bryn

P.S. My laptop is a Compaq Presario CQ50

A:Computer will not wake up from sleep. HELP!

I wouldn't it in sleep mode any more. To change the button from sleep mode to power off do this

control panel (classic view)
power options
(left pane) choose what the power buttons do
change the power button so it will now turn off the computer and not put it to sleep.

Read other 11 answers
RELEVANCY SCORE 50.8

Once and a great while my PC will actually stay asleep, but usually it's always being woken up by what appears to be my USB controller. Need to figure how to stop the premature wakeup!


Wake History Count - 1
Wake History [0]
Wake Source Count - 2
Wake Source [0]
Type: Device
Instance Path: PCI\VEN_1B21&DEV_1042&SUBSYS_84881043&REV_00\4&15c45f2f&0&00E3
Friendly Name:
Description: ASMedia XHCI Controller
Manufacturer: ASMedia Technology Inc
Wake Source [1]
Type: Device
Instance Path: USB\ROOT_HUB20\4&39f1d5&0
Friendly Name:
Description: USB Root Hub
Manufacturer: (Standard USB Host Controller)

A:Wake From Sleep Issues - Win 8.1

Seems had this issue before Waking From Sleep ? ? ? Year ago

Common issue with Windows 8.1 for some with sleep. Ever try look for updates from ASUS ?
What about settings in Device Manager, right click root hub select properties then Power Management.

Read other 4 answers
RELEVANCY SCORE 50.8

7 has been running perfectly since I installed it Jan. 2. Around Feb. 10 I noticed that I could not wake it from sleep, I would have to cut power, wait a bit, and then boot. When it boots however, it will prompt that it is "resuming windows" like it had been sleeping. All windows updates are installed and I have Panda Antivirus running along with Spybot (both show no infections or errors). I looked in the action center for errors and got the following message:



I think this is the problem, there were about 12 other listings of the error.

I'm not sure if it's just that my bios needs to be updated or what, so I'm just looking for any suggestions on what to do. (My bios hasn't been updated yet since the install of 7)

Some Specs:

MOBO is an ASUS P5WDG2 WS Professional
Dual Core 2.6ghz
6 gigs of RAM
8800GTS (driver version is 8.17.11.9621) aka 196.21
Creative SB Audigy 2 ZS (yeah, it's old)
[also I have a USB keyboard and a Bluetooth mouse that uses a USB dongle to connect]

Any help is appreciated!

A:Cannot Wake From Sleep in Windows 7 x64

*bump*

Read other 3 answers
RELEVANCY SCORE 50.8

When I put my laptop to sleep or it sits idle for a period of time and goes to sleep on it's own it stops recognizing the laptop monitor.  It will still display on other monitors connected through the docking station, but not the laptop.  It doesn't matter if I put it to sleep while on the dock or off the dock, it never recognizes the monitor.   I have an Intel HD Grpahics 4600, and an NVIDIA Quadro K1100M video cards.  I've checked drivers for both and they both say they are up to date (9/29/14 for Intel, and 09/12/2014 for NVIDIA).  I have also updated every possible thing in the Lenovo System Update. This problem occured after switching from windows 7 to windows 8.1.  I've looked at other similar issues in the forums that seem to revolve around updating drivers to solve the problem, so I've done as much of that as I know how to. I have also lost the ability to control the brightness of my laptop monitor through my computer at any point in time.  The function keys don't work, and the setting is not shown on my power manager. If you need additional information just let me know, and any help is much appreciated.













Solved!

Go to Solution.

A:Won't Wake Up from Sleep (W540)

I am having exactly same problem. Eventualy tried samethings but still cant find any solution. (installing latest video drivers,lenovo driver updates, fingerprint reader installation...) Thank you Ender 

Read other 9 answers
RELEVANCY SCORE 50.8

Hi,

I have a rather weird problem since installing win 8. When the computer goes to sleep, my normal practice is to hit the esc key to wake it. Worked fine on win 7. Now, when the computer goes to sleep, I hit esc and the computer wakes up but only for about a second or two and then it goes back to sleep. I must wait until it goes to sleep completely (about 5-10 seconds) and after I hit esc again, it wakes up ok.

I have a gateway laptop running intel core i3-2310M.






Acer - Recovery Management Version 5.00.3002.0
Acer Incoperated - Identity Card Version 1.00.3006
Acer Incorporated - Power Management Version 6, 0, 3006,
Acer Incorporated - Updater Version 1.02.3005
Acer Incorporated - Welcome Center Version 1.02.3101.1031

Communications

↓ Broadcom NetLink (TM) Gigabit Ethernet
Status: Cable unplugged
Dhcp Server: none responded
Physical Address: B8:70:F4:8F:4B:A0
↑ Intel(R) Centrino(R) Advanced-N 6205
primary Auto IP Address: 192.168.0.11 / 24
Gateway: 192.168.0.1
Dhcp Server: 192.168.0.1
Physical Address: A0:88:B4:0A:F6:D4
Connection Speed: 144 Mbps
↓ Microsoft Hosted Network Virtual Adapter
Status: Not connected to a network
Dhcp Server: none responded
Physical Address: A2:88:B4:0A:F6:D4
Microsoft ISATAP Adapter
Microsoft Kernel Debug Network Adapter
↓ Microsoft Wi-Fi Direct Virtual Adapter
Status: Not connected to a network
Dhcp Server: none responded... Read more

A:must wake from sleep twice after win 8 upgrade from win 7

Try pressing other keys; clicking; fooling with trackpad. On my laptop, I sometimes have touch the power button briefly. This procedure doesn't make much sense though. If fast startup is enabled, then you might try disabling it: Fast Startup - Turn On or Off in Windows 8.

Read other 5 answers
RELEVANCY SCORE 50.8

The other day when I woke my laptop from sleep, the front indicator light turned on, I could hear the processor fan, but the screen was black (there is no dedicated on/off button for the screen). One hard shutdown later, I get the obligatory "Windows shut down unexpectedly" window after logging in, with the details saying it was a BSOD.

The last time this happened was a few months ago when I had old chipset drivers. I've had the updated ones for about 3 months with no issues.

Any idea why this would happen?

Here is my BlueScreenView log:

==================================================
Dump File : 012510-26707-01.dmp
Crash Time : 1/25/2010 1:28:49 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 0x00000003
Parameter 2 : 0x857a4400
Parameter 3 : 0x82f69ae0
Parameter 4 : 0x85bf8520
Caused By Driver : ntkrnlpa.exe
Caused By Address : ntkrnlpa.exe+dcd10
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : 32-bit
Computer Name :
Full Path : C:\Windows\minidump\012510-26707-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 7600
==================================================

It hasn't happened since, and I'm hoping it doesn't ever.

Any recommenda... Read more

A:Crash on wake from sleep

If it happened just once, forget about it.......
........until next time (if)

Read other 6 answers
RELEVANCY SCORE 50.8

Hello HP forum experts, quite simple, I wish to wake-up from sleep mode via an external keybaord or mouse (RF). Both peripherals are connected to USBs. I tried all power related adjustments in Windows 10 PRO. I read the article " HP PCs - Sleep and Hibernate Issues", but there is no help for my problem.I guess that I would need to change the USB power settings in BIOS (UEFI), however, these settings are not available in BIOS. Any help ? Thanks in advance Klaus  

A:Wake-up from sleep mode

Hi, I use external mice and keyborads 99% of my time on at least half a dozen of laptops daily form 3 vendors HP, Dell and Lenovo.  Just checking them and (Windows 7 Pro, Whidows 10 Pro and Windows 10 Home):                 They all work as designed. Regards.

Read other 1 answers
RELEVANCY SCORE 50.8

I have windows 7 ultimate. anyways I have a problem waking my computer monitor up. things I done.

1. went to power saving mode and turned off everything keep everything on.
did not work
2. updated video card did not work.
3. went to device properties and checked network video card properties to see if there was a settings to keep computers awake no luck.

Plus a different issue my computer keyboard acts weird its like I hit different shortcut keys when i am typing messages. keyboard worked great for xp and ubuntu. just problems with windows 7 uninstalling and reinstalling keyboard drivers did not help.

A:wont wake up from sleep w7

Hi, this from another post covers your problem:-



Quote:




Hi, since this revolves around "hibernation" lets take a look there. Your hibernation settings are contained in a file "hiberfil.sys" and if it is corrupt could be the cause of your problem (none of this will do any harm). Lets clear the file:-

Open a CMD prompt (as administrator, accessories right click command prompt select "run as administrator)

At the prompt type:-
Code:
powercfg -h off press enter
reboot to take effect
This will disable hibernation and clear the hiberfil.sys file.

After reboot open another CMD prompt (as administrator, as above) and type:-
Code:
powercfg -h on press enter
reboot to take effect
Now go to this site and apply the recommended settings for power saving (inc hibernation) read it all.

http://www.vistax64.com/tutorials/63...-problems.html

Hopefully this will resolve your problem.(don't worry about the vista applies to 7 as well)
__________________

Read other 1 answers
RELEVANCY SCORE 50.8

After my H50 machine goes into sleep mode, moving the mouse eliminates the screen saver back to the main screen, however,none of the programs work, at this point.   The open programs are all condensed on the taskbar.  When i hover the mouse over the task bar icons, I see the running programs and screens, but clicking on them does not activate the program into the larger screen.    I've had this problem right out of the box since I bought the computer several weeks ago. I end up shutting down the computer and restarting to get my programs to work again. Any ideas? 

A:H50 - Does not wake up from sleep properly

What H50 model and what Windows OS are you running?Have you updated the system to the latest video drivers etc. or applied all the Windows Updates yet?

Read other 1 answers
RELEVANCY SCORE 50.8

Hi all, Facts :Last august 30th, I ordered a Lenovo Yoga 3 14 (i5 / 8 / 256) from Amazon.It's been delivered one week ago (02/09/15).Two days ago (monday), I installed Kaspersky antivirus, downloaded the files for Windows 10, closed the screen and it went to sleep...And never woke up again ! I tried any and every keys / switches combo I thought of (power switch w/o volume switchs + and -, Novo switch, function keys, Ctrl/alt/ del, ctrl/shift/esc, escape, spacebar, enter... Right now, the power led is still on, the PC runs on battery and I'm waiting for it to run out of charge.I can hear and feel a very tiny ventilation from the back. The USB ports are active since my phone and an external HDD are plugged in them.The keyboard doesn't respond or enlight itself anymore. Despite all my tryings, I get no sound from the speakers... So I hope I will be able to reboot it and find a suitable solution (BIOS, driver update ?).The Yoga is new (one week old) and I'm yet already struggling to bring it back to life !!!!! Question :Is there any way to manually shut down the computer (the power switch for 60 sec doesn't work, the battery can't be taken out, no reset pin hole...) ? LENOVO, please HELP !!!!!I was so happy of this computer, don't let yous customer down. PS : As soon as the battery turns off, I'll try to save the PC and let you know how it goes.Sadly, I'm already considering to turn it back.

A:Yoga 3 14 won't wake up from sleep !!!

Auto-reply.The PC ran out of battery.Once it's been plugged in again, it booted nicely.I'm now downloading Win10 and associate drivers.Wait and see... ++

Read other 9 answers
RELEVANCY SCORE 50.8

Hello, I am using an X240 with the following specs: Processor:  i5-4300 CPU @ 1.90 GHz 2.50 GHzRAM: 8.0 GBSystem: 64 bit, Windows 7No external monitors When my computer lid is closed and it automatically sleeps it is not possible to wake it again when I open the lid. I will move the mouse (both the external and the built in), touch the keys, and even push the power button and it will not wake up. The power button light remains solid. The only way I have figured out how to wake it up is if I plug in a VGA cable that is connected to an external monitor or projector.Does anyone know how to fix this?  

A:X240 will not wake from sleep

First step is to look in the event log to se if a device is throwing a message about a problem entering the sleep state.

Read other 2 answers
RELEVANCY SCORE 50.8

I just upgraded the APU and motherboard of my HTPC and i had to format. I used to be able to wake it using 2 keyboards but now it isn't working anymore.
In the device manager, the option "allow this device to wake computer from sleep" is enabled

In power management, USB selective suspend is turned off.
My motherboard is MSI a75m-e45.

In BIOS advanced settings, in the "wake up event setup" options, there is an option called "wake up event by:"
It is currently set to "OS"

The second option is "BIOS" which unlocks the following options:
"wake up from S3 with USB device"
"wake up from S3/S4/S5 by PS/2 keyboard"

Wether i enable or disable these options, the computer still won't wake from sleep using any USB devices...

It is also impossible to wake the computer sending a magic packet with the correct MAC address. I used to be able to do that before the recent hardware change.

I use Windows 8.1, installed on a SSD
All drivers latest version

A:can't wake from sleep using keyboard or WOL

Also did you check the USB root hub in device manager right click it select power management Tab and uncheck this " Allow the computer to turn off this device to save power ". I found sometimes in Power management settings doesn't always work.

Read other 50 answers