Over 1 million tech questions and answers.

Error code 0x80070570 when trying to create folder on RAID

Q: Error code 0x80070570 when trying to create folder on RAID

I have installed Win 8.1 in some different way than normal. I have sysprepped Win 8.1 in VMware and then saved a image using Clonezilla. When I installed/copied this image to a new computer I removed admin account - before that I have created another admin account with another name. I have RAID array which is my D: partition and when I tried to download file using utorrent it gave me - error the disk is unreadable or corrupted. If i try to copy one file in D: it gives also same error with code 0x80070570.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Error code 0x80070570 when trying to create folder on RAID

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 77.2

Hey guys.
I have a segate 1TB external HDD and right now I barely have anything stored on it. Well, just now when i tried creating a new folder i keep getting error code 0x08000FFFF! What the hell?! This HDD is not even 2 months old! Is it curtains for the drive? Or is there some action I can take? I follow directions very well. Thanks for taking the time to read this question.

A:persistent Error code when trying to create folder on HDD

Download SeaTools for Windows Downloads | Seagate

and run that to see if the drive is bad

as a side note. HDD's can go bad at any time,, they can last 5 min or 20 years, there is no way to tell.

Read other 5 answers
RELEVANCY SCORE 73.2

first of all sorry for my bad English..

I have downloaded windows8 developerPreview-32bit-English (2.8 GB) successfully..
made a bootable USB and tried to install (fresh install).
when it comes to expanding files at 57% it gave error code:0x80070570 and tried again.
same error..
tried to install on VMWare, Virtual Box directly with ISO..
same error.
on the other system with different configuration..
and again same error..

so, i searched on google. only the solution there may be problem with ISO is to re-download ISO..
but my net speed is very very low (download sppeds upto 12 kbps).
i downloaded it 2.8 with great difficulties.. (took 5 days to download.)

i can't download it again..

is there any alternate solution like rebuilding the ISO with working files.
is it possible to know which files of ISO are corrupted and replace them with working files..

pls help...

A:error code : 0x80070570

Sorry, but your best bet is to redownload. good luck.

Read other 5 answers
RELEVANCY SCORE 73.2

Get this error code 0x80070570
cant remove any programs or files
Windows 8.1
HP PC

Read other answers
RELEVANCY SCORE 73.2

I tried to update my son's laptop with the latest "Cumulative Update for Windows 10 Version 1607 (KB3213986)", but after downloading the update I got : Error code: (0x80070570). The same thing happened with the December Cumulative Update and I thought that Microsoft would fix this in the January update? Apparently not. At all other computers at home there was no problem with the update. Any solutions?
 

Read other answers
RELEVANCY SCORE 73.2

I keep getting the error code: 0x80070570, cannot locate file, installation will now be cancelled.  This is Windows 7 Home Premium-32 bit.  I'm trying to do a clean install. Please help.

A:Error Code:0x80070570

Hey,in my view, this kind of problem is probably caused by the culprits as follows: 1.memory installation issue : try to check the installed memory situation on you motherboard and fix it if it has come adrift. 2.driver confilt : update some unsuitable driver to the latest version.

Sometimes things happen that are just out of your control.

Read other 5 answers
RELEVANCY SCORE 73.2

Trying to install Windows 7 Pro and I keep getting the error code 0x80070570.
I have tried everything from removing ram, clearing BIOS, jumper configs, re-downloading the software, slow burn...etc...
Can someone help me please

A:How do I fix 0x80070570 error code??

Fill in your computer specs. Since it's a custom build, include the motherboard make and model.

Read other 5 answers
RELEVANCY SCORE 72.4

Hi,

Hope someone can help me with this issue.

I am trying to install Windows 8 64 Bit on a HP 2530p laptop using a USB Flash Drive that I set up with DiskPart and copied OS files to - from DVD disc.
I first tried to install using a DVD disc in a external DVD RW I plugged into USB port of laptop - this laptop has no built-in optical drive.
I got the same error code with DVD disc that I get with USB Flash drive.
I formatted HD during beginning of install so there is no OS on laptop...

Windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570.

I ran a MemTest86 and did a HD Test from BIOS and both passed.

Any thoughts?

Thank you all

gregmy123

A:Win 8 64 Bit Install Error Code 0x80070570

I would rebuild your USB install drive, you might have ended up with some corrupted files. Was this computer shipped with Win 8? if not then you'll need to set up your USB to boot UEFI, IE is has to be formatted fat 32, then on boot up hit which ever key on your computer that brings up a boot menu select you UEFI USB drive
UEFI Bootable USB Flash Drive - Create in Windows
Upgrade Install to Windows 8 or Windows 8.1

However I would use RUFUS to create your install USB thumb drive

Read other 7 answers
RELEVANCY SCORE 72.4

I get the error code 0x80070570 Everytime I try and install Windows 7. I am trying to do a custom install so it cleans out the computer. I have windows Vista Home edition and I am trying to install either Windows 7 Home premium. I have the requirements it takes to put windows 7 on a computer. You can post on this thread to help me or if you need to email me for some reason it is [email protected]
 

A:error code 0x80070570 When installing win 7

Read other 6 answers
RELEVANCY SCORE 72.4

I keep getting error code 0x80070570
An unexpected error is keeping you from creating the folder. If you continue to receive this error,you can use the error code search to help with this problem

any suggestion to fix would be appreciated
Thanks
D

A:Need Some Help New To Windows 8 Error Code 0x80070570

When do you see this error message? Is it during install or while using Windows 8?

Read other 5 answers
RELEVANCY SCORE 72
A:Error code: 0x80070570 during installation 7100 x86

As I have just posted on another thread put the iso back in utorrent and force a recheck. The same thing happened to me a couple of weeks ago and it turned out the iso was not complete. If it is complete try burning at slower speed.

Read other 4 answers
RELEVANCY SCORE 72

I used to run windows 8.1 x64 but I had to reformat because I thought that would've fixed my problems installing windows 10. When I tried to install windows 8.1 x64 again it failed and got the 0x80070570 error. I also tried windows 7 64bit and windows 10 64 bit but I got the same errors. 32-bit OS installs fine though. Of course all my attemptse were clean installs.

Read other answers
RELEVANCY SCORE 72

I am trying to install Windows 7 32-bit RC on a desktop PC. I have previously used this disk successfully to install the OS on a laptop.

I keep getting an error message to the effect thatWindows cannot install required files.
...
Error code: 0x80070570Initially I thought that this was due to a flaky DVD drive but I have now installed a different drive and am still getting the same message. I also tried a SATA DVD drive but it seems that the Windows 7 installation process didn't like (have drivers for) this interface

edit:I have previosuly managed to load Windows 7 64-bit RC on this PC but had some problems with stability so thought I would give the 32-bit version a go.

I notice that some people have got around this problem by burning the DVD at slow speeds and by using a USB drive to boot from; since I have successfully installed using this DVD, the former doesn't seem relevant and I don't have an 8GB USB drive available. I will try running MemTest86+ on the system on the off-chance.Any explanations / other suggestions . . . please . . . ?

ps - I have just downloaded a new copy of Windows 7 32-bit RC, burned it at 1x and have got the same unhelpful error message

A:Error code: 0x80070570 when attempting to install

Welcome surv1v0r.

Burn the iso again with imgburn @4x speed and try again!!

Good Luck

Read other 9 answers
RELEVANCY SCORE 72

I'm new guys so bear with me.

Just built a new rig, specs are in my bio but long story short I'm trying to install w7 fresh onto a sshd from a usb. When it gets to 15% during expanding windows files it gives me the error code 0x80070570. so here's what I've done: ensured sata settings are set to ahci, used different ram in different slots on mobo, format hd in cmd with diskpart, made sure ram settings good in uefi, redownloaded Iso file and reran program to make usb drive bootable. Currently I'm using the clean all command in disk part and then going to try and partition the drive. Should I be partitioning for the ssd? Is there something else I'm missing with the hybrid drive? I've been working at this for about 2 days and could use some help. Thanks in advance

Read other answers
RELEVANCY SCORE 72

I am trying to install Windows 7 on an HP Slimline s5220y with a USB installer I made from a Windows 7 ISO (I made the ISO from a working Windows 7 DVD). At around 25% through extracting the files, I get an error message with the error code 0x80070570. Any help is appreciated

A:Windows 7 Installation Error code 0x80070570

Hello and welcome Cave mate I think personally although fiddly using this tutorial and invoking the ie.cfg removal tool would be far less problematical as long as you choose the correct version for which you have the activation code for.

Clean Reinstall - Factory OEM Windows 7 it does also give info on doing it with a stick anyhow.

Read other 5 answers
RELEVANCY SCORE 72

I've seen a lot of threads about Error code: 0x80070570 here, but none of the solutions works for me.

I posted on /r/techsupport earlier today:

https://www.reddit.com/r/techsupport...boot_from_usb/

Where I had trouble getting into the windows installer. I managed to get the installer going, but now I am getting an error message during the installation:

https://gyazo.com/cc6818f7667da1c11a66f360a712a0d3
Error code: 0x80070570

This happened after I formatted my drives; during the installation. I've tried to take out my RAM 1 by 1, but with no luck.
Running Windows 7 Ultimate x64 on a self-built desktop computer. Installing Windows 7 Ultimate x64 with a Kingston USB-stick "burned" with Rufus. This is the ISO I am using:

Download Official ISO's of Windows 7, Windows 8.1 or Windows 10 legally and for free - TechFleece

I have no access to a different Windows computer, only a MacBook Pro Retina. Nor do I have a different USB-stick or drive, so solutions which no not require any of this is appreciated. I am not the most computer savvy guy either, so keeping it simple would be nice

Thanks in advance!

Read other answers
RELEVANCY SCORE 71.2

If you just want the solution page down .. it's in this blue

New shiny windows 7 disk arrives. ...... doesn't want to install ...

keep getting error message 0x80070570 when Windows 7 is expanding files:






Quote:
Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation.


Spend an hour googling .. people suggest RAM problems .. I know my RAM is good but spend an hour or two running MEMTEST ...

Then I see a lot of people reduced to trying to install from a USB key .... great .... borrow my neighbours 4GB Cruzer, follow instructions, ... and bork it in the process of not installing the OS.

So eventually I call Microsoft and speak to a very nice lady in India who runs me through a dozen or so workarounds for this .. I'm pressing control +F keys left, right and centre, taking out RAM sticks, disabling EVERYTHING in BIOS.

Always the same thing:






Quote:
Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation.


So after maybe two hours on the phone with her she decided to report the issue to the second line team. I'm told they will call me back today as they don't work weekends (all this took place Friday up til now).

EASY SOLUTION:

I don't wait weekends for answers (nor do I usu... Read more

A:0x80070570 Error Code on install - One Easy Solution

thanks for telling them , they're flooded with all sorts of setup issues (most of which are resolved with hardware removal)

Read other 9 answers
RELEVANCY SCORE 70.4

While i am installing Windows 7 Home Basic 64 Bit on my SONY VAIO VGN-NW350F laptop i am getting the following error .

Windows Cannot Install Required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570.

I am getting error at installing Windows level.....while Expanding Windows Files at 5% it struck.

Formatted total HDD and given new partitions, No use

I have tried with 3 Different Genuine Windows 7 Disks but getting same problem every time.

Please provide me workaround or good solution to fix the problem.

Thanks In Advance
Shankar
9986680858

A:Getting Error code: 0x80070570 while installing Windows 7 Home Premium

Work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums

Read other 3 answers
RELEVANCY SCORE 70.4

Guys i have this problem with my Toshiba laptop:
Several days ago my com crashed..when i started my computer on the very beginning on start up screen when it says windows is starting i get a 1second blue screen with some saying and my laptop restarts by it self.
So,ok i have Windows 7 Ultimate installation dvd and i tried to install it,everything goes well untill on the second line of the very beginning of windows installation 98% i get this message Error Code:0x80070570
I've read some forums people were saying that this could be a RAM problem,so,ok my toshiba have 2 RAMS x 2 Gb..so i taked out 1 tried to install-same error,putted in another slot-same error,replaced and putted my other Ram Memory in the slots same again.
So,is there any solution how to fix this?i can see in bios that bios is reading my HDD,not sure if its working,does that mean that if BIOS is recognizing my Laptops HDD that works 100%???Could be something else causing that error code mentioned above??
Please someone respond and help me...THANK U IN ADVANCE

A:WINDOWS 7 Ultimate installation Error Code 0x80070570 problem!!!

Follow these steps exactly to Clean Reinstall - Factory OEM Windows 7.

Did Ultimate come with the laptop? Install only the licensed version using the Product Key on COA sticker.

Wipe the HD before install with Diskpart Clean Command

Read other 9 answers
RELEVANCY SCORE 70.4

For the last few days, the system BackUp on my external hard drive is getting failed with error code 0x80070570 after completing nearly 95%. The backup consists of system images and other folders that windows automatically choose. Even when trying to run backup without the system images, the backup fails. As per my findings, the 'AppData folder' in additional locations is creating the problem as removing it from backup settings does solve the problem. But this problem didn't exist a few days ago and while letting windows choose what to backup, brings back the problem. How to fix it?

A:Unable to complete System BackUp, Error Code 0x80070570

Hello UrAshish mate maybe it is worth running a test on that drive because that error code covers other issues that come up on a Google.

SeaTools for Windows | Seagate

Read other 3 answers
RELEVANCY SCORE 70.4

windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570. This happens when im trying to do a clean install on a blank ssd - Samsung using windows 8 or windows 7 ultimate. My computer is an Avatar Pitbull gaming computer and you can find the specs here :

Newegg.com - Avatar AMD FX-Series 16GB DDR3 2TB HDD+120GB SSD HDD Capacity Desktop PC Windows 8 64-Bit Gaming PitBull

A:Windows cannot install required files. Error code: 0x80070570

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. (If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install.) Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. Your installer is questionable so if it fails after one more attempt, try another ISO burned with tool in link, then try flash stick method.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the... Read more

Read other 7 answers
RELEVANCY SCORE 64.8

Hi friends
I want to know how to create a folder in java using files concept.
Can any one send me the code to create a folder in our system using files concept.
Thanks in advance
 

A:code to create a folder in java

Have you looked at the API?

Have a look here and see if you can come up with anything:
http://java.sun.com/j2se/1.5.0/docs/api/java/io/File.html#mkdir()
 

Read other 1 answers
RELEVANCY SCORE 61.6

Hello,
 
I have domain user account, with user home folder located on samba share.
When I try to make new folder into my home folder i got following error:
Unable to create folder "New folder" File system error (65535).
 
or
 
An unexcpected error is keeping you from creating the folder. If you continue to recieve this error, you can use the error code to search help with this problem.
Error 0x8000FFFF: Chatastrophic Failure.
 
However the folder is being created. How to solve it?

Read other answers
RELEVANCY SCORE 59.6

Hi heroes,
I can't install win 7 on my brother's laptop. error 0x80070570, file missing or corrupted.
I've seek solution on the net but nothing seems to work.
Laptop decription: ACER Inspire 7250, AMD proc. 64bits,8 Go RAM, HDD 500 Go, 3 partitions : 1.PQSERVICE(OEM) with windows and drivers 2.System reserved 3.Principal
What I tried (I used 8Go USB card with windows usb download tool):
- format principal drive and install clean windows -> format ok, install failed at 4% code 0x80070570
- use (shift) + alt + F10 at startup to reset at factory default -> nothing happened
- download another iso of windows -> same error
- try another version of windows -> same error
- verify integrity of all memories -> errors found on the HDD clusters moved in quarantine -> same error
- plug the HDD on my desktop and try install windows -> same error
- format and delete all partitions on the HDD, except the RECOVERY OEM reserved and create new clear partition -> same problem
No more ideas... please help

A:Unable to install win 7 (code 0x80070570)

Try another flash stick or DVD using the ISO and tool to burn to disk/stick in Clean Reinstall - Factory OEM Windows 7 which steps will assure you get and keep a perfect install. Since Acer Recovery will not run after a Clean Reinstall to C, delete all partitions during the booted install.

If this fails work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums reporting back any failure by when it happened and any error or other behavior.

If these fail test your hard drive using the maker's HD Diagnostic extended CD scan, followed by another Disk Check run from installer's Command Line on the full disk partition you created.

Read other 7 answers
RELEVANCY SCORE 59.2

I have win xp and I cannot fined where to fix this error code 10 device will not start is there someone that can help me. ::

A:Raid Card (Error Code 10)

Hi and Welcome to TSF

Did you install Windows on this system or was it pre-installed? Were the RAID drivers installed ? What other devices ar installed on your system?

In the Device Manager, remove the device and reboot allowing Windows to redetect it.

Read other 5 answers
RELEVANCY SCORE 58.8

Hi, I've just installed one of these:

Eastern Computers - SATA & IDE Green PCI Desktop Driver: Amazon.co.uk: Electronics

(Eastern Computers - SATA & IDE Green PCI Desktop Driver Controller Card).

The card installed fine, but when I connect some disks to it I get an error is device manager:
"This device cannot start. (Code 10)". I'm running Windows 7. I've refreshed the driver (windows says it has the latest driver installed). I've also tried uninstalling the driver and reinstalling. The driver version is 7.0.9600.6352.

Any ideas please?

Thanks

Read other answers
RELEVANCY SCORE 57.6

Hello Guys,

Please help me to solve this problem.
I have two(2) Western Digital VelociRaptor 150Gb HDDs
I have enabled RAID in BIOS. Connected both drives into GSATA controller 0 (0/1).
I'm trying to install Vista Ultimate 64 bit SP1 from original DVD.
Before copying files window, windows sees both drives as one (286Gb). So RAID-0 seems to be working. Then.
When it gets to "Copying Files (0%)" stage it displays the Error Code 0x80070057.
I have formatted both drives on another computer and have replaced SATA cables. I'm still getting same error.

Please help.

A:Error Code 0x80070057 when installing Ultimate 64bit on RAID-0

Have you tried to brake RAID-0, connect one drive and install?

Read other 6 answers
RELEVANCY SCORE 57.2

Hey, yesterday I connected my external HDD to my laptop, and I noticed that a folder was corrupt, suddenly. The folder didn't have the folder icon, and I couldn't access to it. I was mad about that cause that folder had very valuable files o'mine.

I was just about ask here for help, but I've found a solution. Well, the error I was getting:

0x80070570

OK, I've first right-clicked on my external hard drive:

This PC, right-click F:, Properties, Tools, Error Checking, CHECK.

After that, I've done this:

Start Menu (I have Classic Shell)/Programs/Windows System/right-click on Command Prompt/Run as administrator

Then type:

chkdsk /F F:

Where there's the F:, you got to put your external hard drive's letter. In my case, F:. So, if you have a corrupted file in you USB that is G:, you have to type "chkdsk /F G:".

After that, I was able to access to my folder, and everything has been fixed.

Hope it helps someone out there!
PD: thanks to this video, it was so helpful:

Read other answers
RELEVANCY SCORE 56.8

Whenever I try to create new folder in my one of my system drives it is displaying "Unable to create the folder "new folder"". File system error(65535). Previously I was able to create/delete files.
Now every thing i want to do is getting failed (create/delete/modify).

A:Unable to create the folder "New folder" system error 65535

I would try a scan with MalwareBytes Antimalware. A couple of years ago I had something similar where I could not delete any files using Explorer. MBAM picked up the registry hack and fixed it.

The free version works just fine for scanning. A "Threat Scan" should be enough to pick if off if it's a Registry nuisance.

Read other 7 answers
RELEVANCY SCORE 56.8

I have a problem with my 2nd hard drive (70Gb)
which only happen recently.

When I try to make a new folder it says
"Unable to create the folder 'new folder'.
The request could not be perform because of
an I/O device error."

And when I try to save data it says
"Windows - Delayed Write Failed..........
this error may be caused by a failure of your
computer hardware or network connection..."

I got no problem to open files or to copy files
from this drive.

My computer:
Athlon xp1600+
Ram: 256 KB
OS: Windows 2000 pro

I've tried to search thru Microsoft and internet
for any solutions and have try my best including
checking the hardware cables and connection
but no success. Really appreciate if anybody could
share their expertise. Thank you.
 

Read other answers
RELEVANCY SCORE 56.8

I'm having difficulty access media files from my simpletech external hard drive. It pops up immediately upon opening. However it freezes as soon as I click an icon. I try to make it respond and it takes a couple minutes before the folder opens. When it does, and I want to create a new folder, after some time in deep freeze, it gives me the following message:

Unable to create the folder 'New Folder'. the request could not be performed because of an I/O device error.

The media files in the folder open up with no trouble, just your typical pc trouble.

The funny thing is, when I'm in the main folder (which freezes on its way back up the folder heirarchy), I can create a new folder.

I am nervous for the fate of the external harddrive. This is where I back up EVERYTHING.

A:I/O Device error; or Why can't I create a new folder?

you may think this is an odd idea but it will save you from lots of small culprits just backup the things that you can on your system and well connect your ex hdd and full formate it (not quick) . Then disconnect and reconnect it and try by copying files if the problem comes once again or not. If problems not come then before copying back your old data check them with you antivirus with latest virus definitions. u may think what is relation with i/0 error with viruses but it is i have suffered this in my 4 gb pen drive. After all this replay us quickly.

Read other 2 answers
RELEVANCY SCORE 56.4

I'm using the latest Macrium version (6.2.1495) and running the latest Win10 Pro 64bit Insider Preview Fast Ring (14393.67, v1607). In other words, everything is up-to-date.

In the past I've had no problems creating Macrium image backups of Win10 Insider Previews. However, I now keep getting Error Code 10 regarding clusters when the imaging process starts:






Cluster Run Error. Ununsed cluster found in cluster run - Error code = 10. Please run 'chkdsk /r'



I've done the whole chkdsk /r thing via Windows reboot and via Macrium Rescue Media (for the drive I'm trying to back up and even for the drive I'm backing up to) but to no avail.

There seems to be very little on the Net about this issue and Macrium doesn't give support as I'm using an Insider Preview Windows. Would any of you fellow-tenforumers happen to know what would help?

Read other answers
RELEVANCY SCORE 56.4

I have a Satellite Pro C660-2JT running Win 10. When trying to create a recovery media, I get an unexpected error, telling me to quit application and restart it, even if I restart application. Please could someone help.

Read other answers
RELEVANCY SCORE 56

The error occurs during the initial phase of the "Creating Disc" process, which is right after the "Preparing Disc" phase. I have already checked other similar posts. They suggest the firmware software drivers. I went into System from
the Control Panel. From there I went to Devise Manager, then to the DVD/CD-ROM Device and did a software update check. It comes back as okay...you have the most current software. I checked the latest version number for my device (Slimtype Combo LSC-24082k
ATA) at several online download source sites and they verify that I, indeed, have the latest software. So...what's next...how can I fix this so I can create my System Repair Disc?

Read other answers
RELEVANCY SCORE 55.2

*NOTE* I am running XP and Office 2000 I am very happy with these so please DO NOT recommend that I upgrade. Thank you. *NOTE*

When I try to create the folder this comes up every time(please see attached image):

These are the instructions from here:

Create a New Personal Folder
To finish the process you need to define a new personal folder for the user. To do this, use the following steps:
On the File menu, point to New, and click Personal Folders File (.pst).
Type the name of the new Personal Folder. Verify and change the file location if necessary. Click Create. Note Do not use the name mailbox.pst.
Verify and change the information if necessary, and then click OK.
If the Folder List does not appear, on the View menu, click Folder List.
Right-click the new Personal Folders, click "Properties for <Personal Folders>", and click "Deliver POP mail to this personal folders file," click OK.
On the File menu, click Exit. Restart Outlook.
In the Folder List, right-click the Personal Folders not associated with Outlook Today, click Properties, click Advanced, and verify that the path of this file is different than the one you created in step 2. Click OK twice to close the dialogs.
In the Folder List, right-click the Personal Folders not associated with Outlook Today, and click Close "Personal Folders Name."
Click to expand...

Step 2 is the one that crashes Outlook. Is there a patch to get around this error?
 

A:Outlook 2000 create new personal folder (pst) error

Hi Jim
Are you creating a new .pst file due to storage issues with your current .pst folder?

Were you getting any errors in Outlook before attempting to create the new .pst file?

Have you attempted to create the .pst file using the Mail applet in the Control Panel, with Outlook not running?
 

Read other 14 answers
RELEVANCY SCORE 54.4

I'm trying to install Microsoft Office 2013 Professional on my laptop from a USB with the OFFICIAL ISO on it, not a torrent. I am getting an error which reads
"Error 1318. Setup cannot create the folder
C:\ProgramData\Microsft\OFFICE\UICaptions. Verify that the path exists in your system and that you have sufficient permissions to update it."
I am the only account on this laptop, being an administrator, I have tried running this as an admin, changing the permissions of the OFFICE file in ProgramData to "Full control" and it replied with "Access is denied." while trying to apply security information.
When I try double-clicking the OFFICE file in the hidden ProgramData folder, it says that the file or directory is corrupted and unreadable.
Any ideas on how I can get around this issue, any help would be much appreciated, thank you for reading.

A:Microsoft Office 2013, Error 1317 Setup cannot create the folder

Welcome to the forum. Open a cmd prompt then type

chkdsk c: /r

say yes to check on reboot the drive may be corrupt thats giving the problems

Read other 6 answers
RELEVANCY SCORE 53.2

How can I resolve this common problem I have... unknown error during install of Windows Service Pack SP1 update ? I had to restore my older notebook to factory status and now this important update won't complete the install due to this error code. I also
can't update Internet Explorer browser from version 8. Can somebodey help me with these issues?

Read other answers
RELEVANCY SCORE 53.2

I know there are discussion about people windows update not working but none of the solutions are relevant to my situation.

- this error code comes up WindowsUpdate_80072EFE
- your discussion says you have to rename my SoftwareDistrubition Folder
- the problem is i don't have one to rename
- or i cannot find it
- i looked within the search box on windows & no folder called SoftwareDistrubition came up

So can you please let me know where i have gone wrong and what i have to do to ensure that my window update works.

Read other answers
RELEVANCY SCORE 53.2

I've just had a balloon pop up saying that the C:\Windows\winsxs\filemaps folder is corrupt, so I took control of the folder so that I could try and find what file in it was corrupted, so when I actually right click on the folder and click on open, it says that the folder is corrupted and unreadable, so if anyone know how to repair or even restore the filemaps folder it would be most appreciated.

A:Corrupt Filemaps Folder, no error code

First, run chkdsk to correct any File system problems, then run System File Checker (sfc).
Open My Computer.
Right click on drive: and select Properties (drive: is your boot drive, usually C:)
Click on the Tools tab then the Check now button.
Check the Automatically fix File System errors box.

Alternatively, you can click on Start then Run, type chkdsk c: /r and press Enter.

For your boot drive (usually C:), you will get a window that says the check could not be performed ....
Do you want to schedule this disk check to run the next time you restart the computer?
Click on Yes.

Shutdown and reboot. Chkdsk will start. It can take an hour or more to run depending on the size of your hard drive. Be patient and let it complete undisturbed.

If that doesn't fix the problem, run sfc:
Click on Start, type command prompt.
Right click on Command Prompt at the top of the window and select Run as Administrator.
In the Command Prompt Window, type (or copy and paste) sfc /scannow and press Enter.

Vista and Windows 7 tell you if there were and problems, XP did not. You can examine the SFC results as follows:

Open a Command Prompt (does not have to be as Administrator):Type (or copy and paste) findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >sfcdetails.txt and press Enter.
Type (or copy and paste) notepad sfcdetails.txt and press Enter.

Read other 5 answers
RELEVANCY SCORE 52.8

First timer here, so please bear with me. Any help you can offer is MUCH appreciated!

Some of the files on my SD card have changed file extensions and appear corrupted (the modified dates are wonky and the file sizes are off). For example, a file that was formerly IMG_3324.JPG is now MG_3324J.PG, and I can't open, copy, or rename the file. When I try, I receive Error 0x80070570: The file or directory is corrupted and unreadable.

I have gone into Properties>Tools>Check. I receive the following: "We found errors on this drive. To prevent data loss, repair this drive now." However, when I click Repair Drive, I just receive the error, "There was a problem scanning and repairing this drive..."

Most of the files on the SD card are readable and work just fine. I was able to copy them to another location; however, there are about 60 or so corrupted files that I would like to repair (I don't want to lose the pictures!).

Also, any ideas what causes these errors? I want to make sure I don't repeat this in the future :-/

I'm running Windows 10, and the SD card is a Dane-Elec Proline 4GB card.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, Intel64 Family 6 Model 78 Stepping 3
Processor Count: 4
RAM: 8084 Mb
Graphics Card: Intel(R) HD Graphics 520, 1024 Mb
Hard Drives: C: 237 GB (154 GB Free);
Motherboard: ASUSTeK COMPUTER INC., K501... Read more

Read other answers
RELEVANCY SCORE 52.4

I have a folder X which contains a folder Y. When I try to explore this folder I receive the message: 'C:\...\Y is not accessible. The file or directory is corrupt and unreadable.' If I try to delete either X or Y, I receive the error code: 0x80070091, The directory is not empty.

I have full administrator privileges for both folders and I've tried running Disk cleanup, Chkdsk and MoveOnBoot but none of these managed to remove the folders. Can someone help me get rid of them?

Thanks in advance,
Michael

Read other answers
RELEVANCY SCORE 52.4

hi. I have 3 possibly related issues.

1- Recently I've had multiple cursor/arrow freezes after I close my laptop and reopen it. This requires me to go into Task Manager, close everything down and reboot.

2- I'm still use a hard drive based email (Eudora) and have large files . When I rebooted for a cursor freeze last night, I got this error "could not open the file c:\Eudora\in.mbx for writing. Cause: The request contains an invalid argument (22).? Every so often my mailboxes get too large and I have problems, and in the past I was able to create a new inbox.

3- When I tried to rename the inbox or cut and paste it elsewhere so as to create a new one, I got this message "An unexpected error is keeping you from renaming the file" and "Error 0x80070570: The file or directory is corrupted and unreadable."

I've ran System Mechanic several times and have had no issues other than these for the 2 years I've had my X1 carbon, running Windows 7.

Thanks.

A:Error 0x80070570

I'd run a chkdsk /r from the command line and see what comes up...sounds like a corrupted file. You do have backups of your data, right? If not, back up what you can before you start tinkering.

Read other 18 answers
RELEVANCY SCORE 52.4

Hello,

Im currently running Windows XP Home Edition 32-Bit and I just downloaded Windows 7 Professional Upgrade 64-bit. I downloaded the ISO from Digital River which was part of the ultimate steal for students. Then I downloaded the Windows 7 DVD/USB Download Tool and made a bootable usb drive with the ISO on it. I booted from the USB drive and the first part went fine. I chose install now then custom install and then installed it on the drive partition containing XP. It got to about 54% on "unloading files" before it gave me an error 0x80070570. It said the media was corrupted or something and said to make sure all the installation files were there and then restart again. So I tried again, no cigar. I dont really know what to do now!

As im typing this im re-copying the ISO onto the USB Drive a 2nd time to see if it will work now.

Thanks for any help

A:0x80070570 Error

Hi Solidsteel,

You are on the right track, by recopying across the installation media.
Here are some other avenues to look into should your fix not work. If it's possible, run check disk on both your Windows install drive and your usb drive. Also de-fragment both if you can. The error you mentioned is due to corrupt files; but at this early stage (without digging deeper) we don't know where the corruption is. i.e. It could be:Your win 7 install files might be corrupt (this you are now looking into by recreating the installation media)
Your usb drive may have a corrupt partition (run chkdsk /R /X from an elevated command prompt to fix)
The usb drive could be failing
Your Operating system hard drive could have a corrupt partition (chkdsk /R /X), or could be failing
Either drive may be too fragmented for windows to access the files quick enough

Also, can you please confirm if you ran the windows 7 upgrade advisor prior to installing windows 7?

Read other 7 answers
RELEVANCY SCORE 52.4

hi all i have been getting a error message when transferring files to a flash drive the transfer get almost done and then 0x80070570 error can any on help thanks

A:error 0x80070570

Try:
http://windows.microsoft.com/en-US/w...sked-questions

Read other 2 answers
RELEVANCY SCORE 52.4

Aaaargh! I successfully installed the 32-bit windows 7 on my computer, upgrading it from windows XP. I spent an hour realizing how awesome the new OS is before deciding i needed to reformat to be sure i was rid of all spyware/malware. After trying to do the clean install, I keep getting the "Windows cannot install required files" error right when the install starts "expanding". It goes to 1% and then stops. I am installing this from an ISO off of a 4GB flash drive.
Here's what I have tried so far:
Redownloading and rewritting the flash drive (several times)
Updating the BIOS drivers
Restarting the installation without a reboot
Running chkdsk on the flash drive

None of these things have worked for me. I know that it has been suggested to set the hard drive (i think..) to SATA or AHCI, but this goes right over my head. Any help would be great

Is there anything else to try?

A:Error 0x80070570 Please help!

I had a problem like yours on a Dell. I had to flash the BIOS to get it to load Windows 7. I don't know if that applies to your problem but it is worth a shot.

Read other 9 answers
RELEVANCY SCORE 52.4

Hi this is my first post

I have been usuing bitcommet to download some tv swhows and a few movies on my pc. things have always been fine...after i download them i transfer them over to a nexstar external hard drive. recently tho i have been getting an error when transfering files
The error is:

An unexpected error is preventing the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:

error 0x80070570: The file or directory is corrupted and unreadable

Is there a simple way to fix this? I am not really good at working with computer but i follow direction well.
Thank you to all the people that take the time to read this and thank you for any help i may receive

A:Error 0x80070570:

Have a read here: http://forums.techguy.org/windows-vista/75...0x80070570.html

Read other 1 answers