Over 1 million tech questions and answers.

Wingman Force joystick generates MULTIPLE_IRP_COMPLETE_REQUESTS BSOD

Q: Wingman Force joystick generates MULTIPLE_IRP_COMPLETE_REQUESTS BSOD

I have a Logitech Wingman Force joystick that is about 8 years old. When I do a normal boot with the joystick on a USB port it's detected but I always get a MULTIPLE_IRP_COMPLETE_REQUESTS blue screen of death.

When I do a safe boot with networking the joystick is detected and there is no BSOD.

My computer is a Dell Inspiron 9400, Centrino Duo T5600 3.4 GHz, Windows XP 32-bit SP 3, NVIDIA GeForce Go 7900 GS, 2 GB RAM.

I haven't used this this joystick for more than a year, but previously it worked flawlessly with this computer.

I have updated my BIOS and my device drivers.

Logitech suggested reinstalling the driver (result: reinstalling LGS 4.30 or 4.60 didn't help) or trying other USB ports (no improvement).

Microsoft's knowledge base didn't have anything relevant.

I searched on this forum but couldn't find a solution.

Any help would be much appreciated. I really like this joystick and would like to continue using it.

Preferred Solution: Wingman Force joystick generates MULTIPLE_IRP_COMPLETE_REQUESTS BSOD

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Wingman Force joystick generates MULTIPLE_IRP_COMPLETE_REQUESTS BSOD

Did you ever figure this out? I have the exact controller and Laptop and get the same result in trying to use it. I know I had it working on here before. Probably with XP sp1. Wouldn't be surprised if the Service Packed XP is the culprit

Read other 2 answers

Hi all

I am having trouble with using a logitech wingman joystick with BF 1942 & desert combat when I jump in a plane it goes backwards and when I get into the air the planes tend to fly downwards. Any ideas


A:BF 1942 & logitech wingman joystick issues

Hey Dan,

Have you set up your controls in the options menu for your joystick?
you can set the joystick as an alternate so you can still use mouse or keyboard to fly, drive, ect...

Good choice of game by the way.

if you still have problems let me know I have the same joystick I can try it in the next few days. I personally perfer the mouse to fly both planes and choppers.


Read other 2 answers

I have an old logi wingman force[not 3d] that Im trying to get to work with windows vista 32 bit. i run logitech gaming software, and it gives me this "rundll32" stopped error. can i download the files thats on the dvd tht goes with it? I lost my DVD. thx

Read other answers

Hello everyone!

I bought a new Logitech Force 3D Pro Joystick when I bought my PC a couple of weeks ago, the force feedback was working fine until I upgraded to SP1 last night with no problems (it seemed) and the update disabled the force feedback

I've looked everywhere trying to get it going again...nada

Any ideas folks!

PS: Everything else on the joystick works fine

Disregard : Downloaded Logitech Vista64 driver and all is fine now

Thanks in advance


Read other answers

Does anyone know if the old MS Sidewinder Force Feedback Steering Wheel and Joystick work on Windows 10? Thinking of the USB variety rather than the even older gameport devices. I presume they should just be plug in USB and Windows recognises them.

Read other answers

I still have my MS Sidewinder Force Feedback peripherals (joystick and wheel). Both are the later USB revisions. They worked to perfection on Windows 7 (just plug and play) but do they work/get recognised by Windows 10?

The way my machine is setup it will be quite an undertaking running the wires etc in and around the desktop and cramped desk space so I'd like to be confident they would still work

does anyone still use these peripherals or similar types? I found it dissapointing MS turned its back on the sidewinder products. Have never been able to get to grips with game pads really. Playing a driving game or flight sim with a game pad just feels unnatural.

A:MS Sidewinder Force Feedback Joystick and Wheel

If it worked on 7, it likely will work in 10, you may have to reinstall drivers, but in all likely hood the upgrade should be fine.

Read other 1 answers

I came across an excellent flight simulator (Flight Gear) that makes me want to take the old M/S joystick out of moth balls. Trouble is when I hooked it up, it apparently does not know Windows 7 x64bit from apple butter!
I have a USB adapter that shares a USB2 with a 15 pin game port; so obviously they both function as USB2 ports. The old joystick has a 15 pin plug on it and attaches to this connector, but nothing happens. The machine does not recognize it.
Can this 15 pin game port connection function connected through a USB2 to the Motherboard? Can settings be made to tell the machine that it is there or will the Microsoft sidewinder force feedback joystick just not function in that lash-up?
Trying to load the factory included programs/drivers fails because it will not allow Windows 7 to load them. If this type of connection will not function, is there some kind of a card I could get to make it function? And it that is available how does one go about getting a driver that will function with a W-7 x64bit system.
Lots of questions; LOTS of thanks!

A:Microsoft sidewinder force feedback joystick (Oldie but Goodie)

Check out these MS websites to see if they help.

How to install Microsoft Sidewinder Joystick on a Windows 7 - Microsoft Community

Windows 7 compatibility for Microsoft SideWinder Joystick Game Controller model E13-00002

Read other 8 answers

Hey all,

Occasionally getting BSOD's with the above error. Files are attached, and here's my info:

- Windows 7 64-bit
- Original OS was also Windows 7 64-bit
- Full retail version
- ~4 years old
- Reinstalled OS a couple times, most recently last month

- CPU: Intel i7 980
- Video card: Nvidia GTX 580
- Motherboard: Gigabyte G1. Sniper (Socket 1366)
- Power supply: 1000W Coolermaster

- Custom-built from iBuyPower
- Desktop

Will now run a Driver Verifier and update with any appropriate information. Thanks in advance for any help that can be given!

A:BSOD - multiple_irp_complete_requests

Update: Ran Driver Verifier, crashed a couple minutes after reboot. Dump is attached.

Read other 9 answers

I installed Windows XP yesterday, and it was all up and running OK. Then I restarted it and got a blue screen STOP error message with:




This happens immediately after logging in on the welcome screen, on any account. If i reset, the same happens again.

However, if i reset and select 'last known good' from the F8 menu, it all works fine, which is how im typing this now. But then, on the next restart, I will get the Blue Screen STOP error after logging in again just like before! So i have to keep selecting last known good - anyway, I was wondering if anybody could help me??

System Specs:
PC CHIPS M810LMR board
AMD Athlon 1600XP
Two IDE 40GB Hard drives
GeForce4 MX 440 AGP video card
Windows XP Pro

Any info appreciated!



Read other 13 answers

2-3 times a day, I get a MULTIPLE_IRP_COMPLETE_REQUESTS BSOD. I am unable to debug it as no dump is created due to it hanging on "Initializing disk for crash dump". After at least 10 crashes in 4 days and a Missing operating system message, I am fed up. Forgot to say, OS is windows 7 Trying to put the computer in hibernation also causes a crash with a different error. The Bugcheck given when hibernating is just about the most cryptic one i've seen. It is 0x00000609, which may possibly be a totally undocumented bugcheck.I had took a picture of the 0x609 bugcheck. 



Read other 7 answers

I'm working on a Dell Dimension E510 with XP Media Edtion. Client installed I-Tunes and system crashed. Can't get into Safe Mode. Recovery Console doesn't work off Dell Reinstallation DVD. I've used Unbuntu to check memory a hard disk and no problems were found.

A:BSOD Multiple_IRP_Complete_Requests

Hello and sorry for the delay.Do you get a BSOD or a black screen?We Need to Diagnose Your BlueScreenWhen you boot your machine, press F8 to list the startup options, exactly as you would if you were trying to enter Safe ModeSelect "Disable Automatic Restart on System Failure", as shown here:
When your system BSODs, write down the STOP error code, as well as any written out error message back here. The STOP error will always appear, but the message may not. You are looking for this:
Please post me the error(s).

Read other 1 answers

? OS - Win 7 Ultimate SP1
? 64bit
? What was original installed OS on system? (Windows 7 home)
? Is the OS an OEM version (I bought and installed Windows 7 ultimate)
? Age of system (2 Years Old)
? Age of OS installation - have you re-installed the OS? I have reinstalled 3 times... Last was June 2012

? CPU (Intel(R) Core(TM) i3 CPU M370 @ 2.40GHz)

? System Manufacturer (Toshiba)
? Exact model number (Toshiba Laptop A665-S6081)

A:BSOD Multiple_IRP_Complete_Requests

It appears that you are using an ATEN USB to Serial adapter.

If so look for an updated driver or remove it for testing.

Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02c11000 PsLoadedModuleList = 0xfffff800`02e55670
Debug session time: Sat Sep 29 04:13:00.577 2012 (UTC - 4:00)
System Uptime: 0 days 3:55:48.028
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck 44, {fffffa800cf809b0, eae, 0, 0}

*** WARNING: Unable to verify timestamp for ser2at64.sys
*** ERROR: Module load completed but symbols could not be loaded for ser2at64.sys
*** WARNING: Unable to verify checksum for win32k.sys
Probably caused ... Read more

Read other 4 answers

Am having two or more BSOD a day when resuming from standby or closing a VMWare virtual machine on my laptop.

Complete dump attached, any help appreciated !!!

A:BSOD Multiple_IRP_Complete_requests

Quote: Originally Posted by tassmuc

Am having two or more BSOD a day when resuming from standby or closing a VMWare virtual machine on my laptop.

Complete dump attached, any help appreciated !!!

You have massive USBPORT driver issues. YOu need to remove them all and re-install only what is needed.

Ken J


Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\101110-15132-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\symbols;*http://msdl.microsoft.com/download/symbols/;srv*e:\symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0x82e38000 PsLoadedModuleList = 0x82f80810
Debug session time: Mon Oct 11 05:11:36.737 2010 (GMT-4)
System Uptime: 0 days 0:00:19.624
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
0: kd> !analyze -v
* ... Read more

Read other 9 answers

Hi everyone,

My dial-up Creatix V.90 HAM modem causes this BSoD Multiple_IRP_Complete_requests when shutting down Windows 7. I've used this modem for years with other versions of Windows without any problems.

There are no drivers for Windows 7, but it installs, is recognized with its full name, the General box says "This device is working properly" and operates without problem with this OS. Before shutting down, I have to disable the modem in Device Manager to avoid the BSoD (sometimes this very disabling causes the computer to hang and nothing less than a reset will do).

Is there something I can do -a change somewhere in the properties dialog in Device Manager for instance- to resolve this?

Thanks in advance.

A:Multiple_IRP_Complete_requests BSoD

Hi zpluug. What is the dates of drivers? If there are no Win 7 drivers, it is time to upgrade your modem to one certified compatible with Win 7.

Read other 6 answers

Hi. I have had this BSOD twice, today and yesterday, while running Microsoft Flight Simulator 2004 (on my 'gaming' PC, dedicated to MSFS). I have never had a BSOD on this machine before yesterday... I did not install new hardware (or software, as far as I know!).

I have read the instructions on posting here, but can I ask first whether I have to use the DM Log Collector software, or can I just upload the minidump and xml files that I saved?

Many thanks for the help!


Read other answers

Hi everybody,

I already read some threads about this error, but as it seems to be completely different each time, I thought it would be better to create my own.

So as the title says, I got this BSOD error few times a day. It seems to appears randomly, there is no specific action that causes this. As far as I know, I got it the first time while installing a driver (this one : Drivers Intel PROSet/Wireless WiFi Connection Utility 16.7.0 WHQL), so I suppose I got now two drivers who are interfering each others.

I also attach a .rar with the files SF Diagnostic tool created.

Thanks a lot for your help, and please forgive the writing errors a bad-in-english frenchie can make.

Have a nice day !

A:BSOD Multiple_irp_complete_requests, Windows 8.1


Uninstall Hamachi.

Here is how to do it manually, if you run into issues.

Read other 3 answers

Hi there, to anyone reading this, thanks a lot for taking your time to help me with this, I really apreciate it!

I have an Acer Aspire V3-571G-9686
Intel Core i7-3632QM 2.2GHz
Nvidia GeForce GT 640M with 2GB dedicated VRAM
Intel Graphics HD 4000

The problem goes like this:

I updated my intel HD 4000's driver, and suddently the touchpad's gestures stoped working. After this, I reinstaled the touchpad's driver from Elantech. I did not worked, so I uninstaled it and restarted my computer, after this I got the BSOD with the error: MULTIPLE_IRP_COMPLETE_REQUESTS

A:Bsod: Error: Multiple_irp_complete_requests

Please see Brink's thread at the top of this subforum, and post what he shows to, here.

Blue Screen of Death (BSOD) Posting Instructions

Read other 3 answers

I've been having BSOD problems lately. First it was just DRIVER_IRQL_LESS_OR_NOT_EQUAL with something like x0000000d but now it seems to be a combination of that and MULTIPLE_IRP_COMPLETE_REQUESTS.

I have XP SP2 and not all of my drivers are up to date but most of these are just mouse/keyboard and USB stuffs and the like. I have recently updated my video drivers but can't remember whether the BSODs started before then but I know the second BSOD I mentioned only started today.Haven't run any virus scans or the like. I have tried updating updating my VIA ethernet adapter but when I restarted it came up with something like 60h/64h emulation not available on this USB controller, so I reverted the driver.

It seems mostly to happen when I'm playing a game. The stuff I've been playing recently isn't very stressful on the system.

My specs are;
Intel Pentium D 2.66Ghz Dual core
Nvidia GeForce 9500GT 1024mb
4GB of ram(Only shows up as 2.5gb)
VIA compatible Fast ethernet adapter
Netgear WN311t wireless PCI adapter
Not sure of motherboard

Thanks, Cheese.

A:BSOD Driver_Irql and Multiple_IRP_Complete_requests

Seriously? This is truly a no-fix problem?
Can't find anything on this and it's already fallen to the second page

Read other 1 answers

OS - Windows 8
? x64
? What was original installed OS on system? : Windows 8
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? : OEM
? Age of system (hardware): ~1 year
? Age of OS installation - have you re-installed the OS?: ~1 year; never re-installed.

? CPU : Intel Core i7 - 3632QM @ 2.20GHz
? Video Card : Intel HD Graphics 4000 (up to 1.65 GB)
? MotherBoard: HP Pavilion g6
? Power Supply - brand & wattage: HP, 19.5V, 65W MAX (laptop adapter)

? System Manufacturer: Hewlett-Packard (HP)
? Exact model number: 2377sz

Additional Info:
- The BSoD crashes are very random and inconsistent.
- The problem persists for 3 days.
- My antivirus has revealed no viruses on my computer.
- The "perfmon /report" command did not work in "Safe Mode with Network". The error it gave me was related to the "path not specified". Trying to do it manually resulted in the same error. The info attached regarding it is from the normal OS mode.
- System Restore Mode does not work because of corrupted files.
- The Error Checker option of the HDD revealed nothing wrong.
- The BIOS is in french. Not sure if I can change that. And I'm not too good with french.
- My first post regarding this problem can be found here:
multiple_irp_complete_requests problem

Thank you in advance!

A:[SOLVED] BSoD Multiple_irp_complete_requests problem


You are having the same issue as

1. Blue Screen - MULTIPLE-IRP-COMPLETE-REQUESTS on Windows 8.1 - Microsoft Community


2. Update Drivers to stop "Blue Screen Of Death" - Microsoft Community


3. Windows 8.1 Error : MULTIPLE IRP COMPLETE REQUESTS. - Microsoft Community


4. [SOLVED] BSOD Win 8.1 Multiple Complete IRP Request


Please follow my advice I have given there, which is to go ahead and remove LogMeIn for troubleshooting purposes as there appears to be a bug with it. If you heavily rely on the use of remote access software, you can in the mean time use an alternative such as TeamViewer (which I prefer more, anyway).

See my blog post for any more information - BSOD Kernel Dump Analysis: LogMeIn bug (possibly)



Read other 3 answers

Hi EightForums,

Today, on my new-ish Windows 8.1 laptop, after not being able to load any web pages with Google Chrome (I didn't try IE), I rebooted, then I started chrome, I was able to connect to google.co.uk but then suddenly encountered a BSOD saying the aforementioned error had caused it.

On booting again I again started Chrome to look up this error and BSOD again for the same reason.

I googled on my old W7 laptop this error and it seems to be caused by pretty much anything so I've made my own thread.

Using IE, I managed to get the SF_Diagnostic_Tool and ran it, I've zipped the files, bluetoothed them to this old laptop and attached them here.

So, so far I know it's possibly something to do with Chrome, it isn't IE and it isn't bluetooth. Nor to do with running (at least some) programs. As of right now it's idling and not crashed again.

!!!Mid-Writing update!!! I hibernated the laptop (Sleep seems to cause some issues but they're liveable) and on waking, while still on that drop down thing it crashed again. On rebooting it crashed in the same place. It was the same error.

I don't yet have the dumps for these last two.

Please help and thank-you anyone that can!


Update: It automatically booted me into startup repair. Should I perform a system restore?

Read other 11 answers

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
8.00 GB (2x4) Kingston HyperX Beast Memory
Sapphire Dual-X AMD R9 280 Graphics Card - 3GB GDDR5, 384-bit
(1) AMD High Definition Audio Device (2) Realtek High Definition
1920 x 1080 x 32 bits (4294967296 colors) @ 60 Hz
Seagate 2TB Barracuda

Hello I hope you can help me out. I have been encoutering strange problems with my PC last few weeks and this one causing me the most problems, I have tried system restore off the hdd and a win 7 64bit ultimate dvd without help. I have tried bootrec /fixmbr, bootrec /fixboot and bootsect /nt60 all.

I am unable to get chkdsk /f to work as anytime I schedule it through a windows CD or Windows Safe mode it never seems to actually be scheduled the BSOD pops up again.

Please help I am trying to at least get back into this windows and use AcdSee for a few hours to export a backup of the database which has a lot of important work with metadata/tags. Thank you in Advance.

1) I have have been having problems with my pc for the last few weeks, the most recent was anytime I plugged in a ps3 joystick into any usb 2 or 3 port the screen would turn into crazy colours and the pc locks up. Last thing I did was flash my BIOS in hoping that and installing new USB drivers things would get fixed. I believe that flashing my BIOS might have reset the HDD AHIC/IDE setting and so I was unable to boot into ... Read more

A:ps3 joystick/usbs lock up pc, flashing new BIOS causes BSOD 0x000007B

Hiya and welcome to SevenForums!

BugCheck C4, {e3, fffff88006c7e871, 77aee9a0, 0}

Unable to load image \SystemRoot\system32\drivers\aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by : aswSnx.sys ( aswSnx+24871 )

BugCheck D1, {fffff8800819d638, 2, 8, fffff8800819d638}

Unable to load image \SystemRoot\system32\DRIVERS\MijXfilt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+1b638 )

BugCheck 124, {0, fffffa80090b3028, be000000, 800400}

Probably caused by : hardware

MODULE_NAME: hardware

IMAGE_NAME: hardware



BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE

BugCheck 18, {fffffa8006ce45b0, fffffa800b5e7c20, 1, 1}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+279e0 )
Please run Prime95, if the temps goes too high, exit the test. Hardware - Stress Test With Prime95

Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninsta... Read more

Read other 3 answers

when trying to install, program asks for windows 98 disk.
i have one, but NOT the original one for this computer.
program shows joystick not installed.
i did download driver from logitech

A:wingman extreme 3d

Read other 7 answers

I am trying to install a Logitech-wingman game controller. When I highlight the one I want and hit"ok" a message pops up that says I have too many devices and must delete one first. I actually have no devices hooked up. Please Help! Jane's F/A -18 is awaiting.

A:wingman controller

You'll have to tell us more before we can help.

What OS are you using?

Where are you highlighting "one"? And what do you mean by "one"? Is this in the game?

Read other 1 answers

Can anyone tell me what games are compatable with Wingman rumble pad? Ive used it with motocross madness and works great but not many games use the rumble feature. Is it a good game pad and is it worth the money? Thanks for any help.

Read other answers

My new computer (Dell XPS running Windows XP Professional w/SP2) crashes when I connect my Logitech Wingman Formula Force Wheel. No problem with other devices, including Logitech Extreme 3D Pro Joystick.
I've followed all Logitech suggested fixes. I was able to install the latest Logitech software and successfully connect and run the device in the "clean boot" mode, however, after normal boot the system crashes -- obviously some conflict that I can't find.
Error messages as follows:
Blue screen – “windows shut down to prevent damage”


STOP: 0x00000044 (0x86F23008, 0x00000D62, 0x00000000, 0x00000000)

Thanks for any suggestions. . .

A:Logitech Wingman Conflict

http://support.microsoft.com/default.aspx?scid=kb;en-us;839619 or http://msdn.microsoft.com/library/default.asp?url=/library/en-us/w2kmsgs/1183.asp

Read other 2 answers

hey all out there ..I need some help ...I have a nes rom ...gauntlet and trying to get it to run on my gamepad .... I cant get it ... i am using logitech wingman game pad ... I love this game and cant get it working ..I have downloaded all kinds of nes emulators ..if you all know how to get this working let me know. also if you know where I can find gauntlet 2 nes I would appreciate that help also ..I cant use game pad on playstation emulators and other games but cant figure this one out ... thanks

you can get ahold of me via messenger or email


aol -- mmoore5553

yahoo -- [email protected]

msn -- [email protected]
thank you in advance

A:nes emulation and wingman gamepad help


Read other 1 answers

I have been using the gamepad for about a month and it's the best gamepad ive used, but not many games that use D-Force or the rumble feature. Can anyone tell me what games use the rumble feature? The only one I know of is Rogue Squadron. Any help is appreciated, thanks.

A:Logitech Wingman Rumble Pad


Not a gamer myself, but had a quick search:


http://groups.google.com/groups?q=R...[email protected]&rnum=3

May have to wait to see if someone here uses one.



Read other 3 answers

I would like to use the twisting handle on my logitech wingman extreme joystick with Descent 3 to control the banking...however when i go to assign the controls in the joystick section when i click to change it it automatically selects "Axis Z" before i do anything. Any help would be appreciated.

Read other answers

I have purchased a new joy stick for my pc I am using win 95. I have the updates for win 95, Where the problem is information I got from Logitect web site was I needed to have in the control panel/system/device manager/Universal serival bus contoller, I need to have 1 , USB Root Hub and a USB Port where my problem is I have the USB Root HUB but not the USB Port, So where can I get the information to install one of these

Thanks Dave

A:Logitech Wingman Extreme Digitial 3d

Read other 16 answers

i have a logitech wingman interceptor 9-button. i know its maybe 8 years old and there are much better joysticks out there but i'm comfortable with it's feel and the placement of the buttons. here is the real problem:-( all my new computers and both my notebooks don't have any midi/gameports. im thinking about buying one of those gameport to usb connectors,but im not sure if it will work???

i need the help of anyone who's been thru this situation before,and what happened after you did try to use it hooked up thru the gameport to usb connector running windows xp

A:Gameport to USB For Wingman Interceptor 9-Button

It does appear that incompatabiliies may abound.

Read other 1 answers

Okay... here is my new problem.

My Logitech Wingman Rumblepad (USB) causes most games on my computer to run very choppy. It will run good for about 5 seconds and then it will stutter for about 5 seconds and then repeats. I have not noticed any problems playing video files in Media Player.

I believe it is my controller doing it because deleting the controller in device manager makes everything work good again.

I have downloaded the newest wingman software (v1.2) and this hasn't helped at all.

Anybody have any suggestions as to why this may be happening? I have a Pentium III 550 with a Radeon 7000 graphics card and am running under Windows 98 2nd ed.


A:Wingman makes graphics stutter

Read other 7 answers

im trying to play the game Hawx with a Logirech wingman joystick, but its like the joystick only half works with the game, it will pitch up, shoot missles and machine gun, but thats it, i cant roll side to side or anything, and if i set the controls for the joystick it still dont work, thanks

Read other answers

I'm not sure if this is a Hardware or Software question, but it's game related so I'm posting it here.

Basically, when I'm playing The Hobbit, it works just fine for awhile, but then after say fifteen minutes of playing, the directional joystick tweaks out and makes it so that instead of running, Bilbo walks, when I have the stick pressed in the right. That's what it's been doing as long as I've had the game but just today it did something different, after it did the usual weaker directional sense, the right direction cut out completely, and the left direction did the same thing that the right direction used to do. It only happens in this one game, and if I take the pad out and plug it into a different USB port, it fixes the problem temporarily, but then it starts up again after about the same amount of time. Also, the rumble doesn't ever come on in any of the games, even if they support it. But as far as the directional problem goes, it only happens in The Hobbit, but it's fixed for a little while when I unplug it, which leads me to believe it's a hardware problem.

I'm using Windows XP Home, I'm on a Dell Inspiron 8500 Notebook, both the notebook and the pad are almost brand new, the Notebook is plugged into the docking bay, but I don't know how that would make any difference. Intel P4m 2.6 GHz CPU, 512 MB DDR RAM, GeForce 4 4200 Go Graphics Card, my system fully supports it, I can't figure it out.... Read more

A:Logitech Wingman Rumblepad Glitch

Read other 8 answers

I'd like to force a crash but I can't seem to do it.

I have no Scroll Lock key so I can't force a dump through the keyboard as Microsoft suggest. Forcing a System Crash from the Keyboard (Windows Debuggers)

I can't force one through WinDbg due to the error shown below - I tried changing "bcdedit -debug on" and restarting but it didn't help.

I tried powershell get-process | stop-process -force but that only stopped powershell.

I can get a user mode dump by attaching to a process - that is all.

What should I do? It is only for my education you understand - I don't have an issue to resolve.

A:How can I force a BSOD

The easiest way is to download: StartBlueScreen - Initiate a Blue Screen of Death (BSOD) in Windows operating system

Read other 6 answers

I run Avast Internet Security 2016 for my main defense against malware.

A:Condor-Wingman Malware Configuration Shield

I would set Smartscreen to System Wide and add Zemana Anti-Malware as a scanner. Also this is a good guide to follow for Avast lovers. How to setup Avast Internet Security 2016 for Maximum Protection (Guide)

Read other 4 answers

So... Before anyone tells me to send it to Logitech for repairs, I should mention that there are none that I know of in my area, and I'm not willing to pay R300 (ZAR) postage to send a big box 600km away to get my wheel 'checked'. Other than that, it's already nearly 3 years old and way out of warranty...

Now, onto the finer details. The force feedback suddenly stopped working one day a few months back. There was no funny smell or smoke or unusual amount of heat, etc.. Anyways, long story short: I suspect the motor is the culprit here, I can't see any damage or burn marks on the IC boards..

A Google search for the details on the side of the motor returns nothing even remotely related to Logitech or electronics in general, so I'm hoping someone can help point me in the right direction here.

Markings on the side:
* Made in China

The * above is a symbol, almost like a logo, but I don't recognise it... I've redrawn it in Paint (see attached), perhaps someone else knows it...? Other than that, I've also attached a photo of the motor with a CD beneath it for a size reference.

I don't play racing games enough to warrant buying a new wheel, and everything else on the wheel still works, I simply don't have any force feedback and the wheel obviously doesn't center itself anymore (no springs, all done with the motor). If anybody can help point me in the right direction with looking for a way to either test / repair / replace this motor, I would be eter... Read more

A:Logitech Driving Force EX - Force Feedback Motor Query

Hello, I am also facing the same problem as faced by you. The wheel is working fine but there is no ff. I dont know whether the fault lies with adapter or with motor or it is a circuit problem. Could you please tell me how did you manage to solve your problem??

Read other 1 answers

This maybe unrelated but here it goes. I done a full system backup with Acronis and after it completed, I then shutdown the PC. It then started to validate the new backup, with the "operations in progress" appearing. Anyway, I had to use my PC urgently so did a force shutdown.

PC booted up as normal and I carried on using it. However, when I went to system shutdown, a BSOD appeared. I looked at the mini dump file and it appears to have been caused by ntoskrnl.exe & tcpip.sys (which maybe totally unrelated to the above shutdown).

I have attached the dump file to see if someone can help me.

Thank you

A:BSOD after force shutdown

Quote: Originally Posted by happyhammer7

This maybe unrelated but here it goes. I done a full system backup with Acronis and after it completed, I then shutdown the PC. It then started to validate the new backup, with the "operations in progress" appearing. Anyway, I had to use my PC urgently so did a force shutdown.

PC booted up as normal and I carried on using it. However, when I went to system shutdown, a BSOD appeared. I looked at the mini dump file and it appears to have been caused by ntoskrnl.exe & tcpip.sys (which maybe totally unrelated to the above shutdown).

I have attached the dump file to see if someone can help me.

Thank you

Hi happyhammer7

It seems that your Razer Tarantula Keyboard Driver cause the bsod.

So please try to update the keyboard driver http://www.razersupport.com/index.ph...20&nav=0,77,20

Please post back with any results.

Read other 5 answers

Hello everyone!

I am looking for information on a issue I have when I open Delta Force Task Force Dagger.

The game will actually open two instances of itself, I will be able to play in the one that pops up but when I click on the Exit button there is still a instance on the start bar. I have to maximize that then it goes back into the game which at that point I have to click the exit button again and then the program is closed.

I checked on Novalogic's web site support and even emailed them but no resolve either way.

Thanks in advance for any help!


Read other answers

Hello, I am asking if it is possible to force a BSOD in Win8.1 such as 0x0000009F: DRIVER_POWER_STATE_FAILURE

A:How to force a BSOD with a specific code?

You are asking for information that could be used to harm someone's computer.

Read other 3 answers

Hi guys and girls,

My Pc keeps going to the BSOD everytime i start my computer. i get this report in safemode.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.
Locale ID: 2057

Additional information about the problem:
BCCode: 19
BCP1: 0000000000000022
BCP2: FFFFF8A000C00000
BCP3: 0000000000000001
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:

any help would be greatly recieved! i have attached the report to the thread.


A:BSOD on startup unless i force it into safemode.


Probably caused by :avgldx64.sys
This is your AVG driver, AVG is known to cause some BSODs,
This also those that AVG isn't installed correctly, or the install is corrupt.

Security Processor Loader Driver ROOT\LEGACY_SPLDR\0000 This device is not present, is not working properly, or does not have all its drivers installed.

Either uninstall through Programs and Features, or use the AVG uninstall utility: http://download.avg.com/filedir/util..._2015_5501.exe
Although this may be the only problem, here's some other suggestions.

sptd.sys Thu Oct 31 10:26:53 2013 (527276BD)
This driver belongs to SCSI Pass Through Direct Host - Daemon Tools, and is a known problem to cause BSODs. I suggest uninstalling it using this tool DuplexSecure - Downloads

nvrd64.sys(NVIDIA nForce RAID Driver) Mon Jun 22 17:23:00 2009 (4A400444)
nvstor64.sys(nVidia Storage Driver) Mon Jun 22 17:23:37 2009 (4A400469)
These 2 nVidia drivers are out of date, I suggest you update them: Drivers - Download NVIDIA Drivers

Post back results,

Read other 3 answers

Hello, I have been trying to install my windows 10 upgrade, but keep encountering the error Multiple_IRP_Complete_Requests as well as the following errors,  0x80070057 and c1900101-30018. Would someone please help me resolve this conflict? Thanks!!

Read other answers

I have gotten a blue screen several times over the last month. This is the first time I looked closely at what it said, but I believe it has been the same each time.

The OS is Windows XP Home Edition.

The error message is MULTIPLE_IRP_COMPLETE_REQUESTS. The specific message is "STOP: 0X00000044 (0x8240B008, 0X00000D64, 0X00000000, 0X00000000)"

Additional information. The boot also takes a very long time sometimes as much as an hour until the machine is usable. More specifically, XP itself boots fairly quickly, but then it takes up to an hour for all of the icons to be fully painted on the screen and in the taskbar, and the machine is not responsive until this occurs. However, once the machine is responsive, it works as usual. This also occurred about a month ago -- I got it to stop by removing some programs from the start-up sequence. But it has returned.

Read other answers

I keep getting a MULTIPLE_IRP_COMPlETE_REQUESTS BSOD, usually 5 minutes or so after bootup, or sometimes after intensive tasks. I suspect it is hamachi, but I have no way to tell. Can anyone help me locate the source so that I can update a driver, or uninstall the problem?

Dump Files: Minidump.zip



As you suspected, Logmein Hamatchi driver seems to be the culprit.

BugCheck 44, {ffffe00006f87a60, f8a, 0, 0}
Unable to load image \SystemRoot\system32\DRIVERS\Hamdrv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Hamdrv.sys
*** ERROR: Module load completed but symbols could not be loaded for Hamdrv.sys
Probably caused by : Hamdrv.sys ( Hamdrv+1f0a )

Driver Reference Table - Hamdrv.sys

Please uninstall and check.

Read other 2 answers

I have seen this problem addressed in other forums but the remedies are not possible for my computer. I am getting this error message upon startup/reboot and I can't get windows to load. Any suggestions on how I can fix this problem? I've gone into the startup options as suggested, and tried to select Safe Mode but again upon startup the error message reappears.


Hi, and welcome to TSF.

Do you have Novell Client 4.83 installed ?

A little more info and specs would be good.

Read other 3 answers

Have Dell Latitude D520, BIOS Dell Inc. A08, Microsoft Windows XP Pro- version 5.1.2600, service pack 3.0, use a docking station with direct link thru Cisco hardwire/wireless router to internet.

when laptop in docking station no problems.

when laptop NOT in docking station get blue screen of death- MULTIPLE_IRP_COMPLETE_REQUESTS

Tech info says STOP: 0x00000044 ------

have uninstalled various software that has been added (to best of my knowledge) back to prior to this problem.. no solution

used to work fine prior to 12.31.09


Read other answers

I have been receiving this when i boot up my computer. I have been searching forums for the fix but my problem is the computer will not start in safe mode. It just freezes on a screen that tells me to start in safe mode when I start it in safe mode. Anyone that can help would be appreciated.



Does it actually boot to 'normal' following that error message or what ?

MS have this info which isn't a lot of help: -> Bug Check 0x44: MULTIPLE_IRP_COMPLETE_REQUESTS

Bottom line is, you likely have 2 drivers trying to do the same thing. One of them is redundant.

Read other 3 answers