Over 1 million tech questions and answers.

Configure Thomson TG585v8 Wireless Router To Relay off Alvarion Ethernet

Q: Configure Thomson TG585v8 Wireless Router To Relay off Alvarion Ethernet

Hi All

Not a network expert so need a little help here!

I live out in the sticks so the only way to get an internet connection is through a white box radio receiver made by a company called Alvarion. It's stuck on the outside of the house and only has one wire protruding. This wire runs inside and ends in an ethernet connection. I've been using this to connect to the internet.

So far so good. But now I was hoping to be able to somehow turn this ethernet connection into a wireless connection.

I have a Thomson TG585v8 wireless router and was wondering if there is a way that I can use this? I tried just plugging the Alvarion ethernet connection into one of the Thomson's ports but this didn't work.

I read somewhere that I need to turn off the DHCP for the Thomson router but I can't work out how to get into the configuration menu to do so. If I connect the Thomson directly to my laptop and go to the default Thomson Gateway (192.168.1.254) it asks for a username and password and I can't get past this. I've already tried Administrator and a blank password and I've tried the Network Name and Wireless Key just in case, but to no avail. I reset the router but still no luck. I've also tried going to dsldevice.lan but. again, no luck.

Well, I may be wildly off track but if someone would be kind enough to steer me in the right direction it would be much appreciated!

Cheers,

Chew

RELEVANCY SCORE 200
Preferred Solution: Configure Thomson TG585v8 Wireless Router To Relay off Alvarion Ethernet

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Configure Thomson TG585v8 Wireless Router To Relay off Alvarion Ethernet

Read other 16 answers
RELEVANCY SCORE 140.8

Hi,
i have configured my wireless router.But im having problems. I can connect to the the internet using a lan cable which is connected to the router. but when im using the wireless connection i do not have internet connectivity. please help!!
 

A:Configure Thomson TG585v8 Wireless

What happens when you try and connect using wireless? Do you aquire an IP Address? Do you get any sort of error messages? Can any other devices connect to the wireless?

Please do the following :

Start > Run > Enter "CMD" > Select ok

Enter "ipconfig /all" and copy and paste the results here

Thanks
 

Read other 1 answers
RELEVANCY SCORE 78.4

How can I use DWS to set up my Linksys befw11s4 as a wireless relay for internet access? I've upgraded to the latest firmware to give this router DWS capability but am at a loss as to how to set it up. I'd like to set one of these routers at one end of my house connected to my cable modem and have the other in the middle of the house to provide internet access for two computers on the far end which are out of range of the first router. HELP!
 

A:wireless relay using a DWS router

I have only heard of the befw11s4 being an access point or a router I have not seen it where it an be a range extender.

Personally I owuld look for some kind of range expander or some type of hi gain antenna.
 

Read other 2 answers
RELEVANCY SCORE 76.8

Hi.

Im trying to access my router but I have no clue what the Username and Password is for it.

I have factory reset it and tried all the options on the bottom of the router but nothing works!!!

Here are the pics of the 2 stickers on the bottom of the router.

I found this link; https://www.plus.net/support/hardware/thomson585web.pdf

In step 9 it says user should be Administrator and pass should be the serial of the router but this does not work either

Can anyone help me out? PLEASE!!!!

Thanks in advance

A:Need Help with Wireless Router Thomson TG585 v7

As soon as you reset the router it lost all of it's previously set passwords. Default is admin for Thomson.

Just typing admin should get you there.

Read other 1 answers
RELEVANCY SCORE 76.8

Hi
I have just gotten a thomson TG585 modem/router. I have it connected to my main home PC via ethernet and can get the net just fine on that PC. But I've read the manual and it says to shortly press the front wireless button, I do that and nothing happens at all. I have a solid orange light for wireless on the top of the unit and according to the manual that means "no wireless activity, WEP encryption"

does anyone have any idea what that means and how I get my wireless to work? I need it for my phone and also for tivo.
thanks
wendy
 

A:Solved: No wireless with thomson router

Read other 6 answers
RELEVANCY SCORE 76.8

I use a wired network connection to my neighbours Vodafone Modem (We share his monthly cost).

I also have a TP-LINK 54M Wireless ADSL2+ Router from a previous broadband contract with a landline phone company.

Is it possible to reset and configure the TP-LINK Router to act as a relay unit, connected to the network cable, so I can then use my laptop elsewhere in the house?
 

A:Using TP-LINK Wireless ADSL2+ Router as relay?

a wired network connection to my neighbours Vodafone ModemClick to expand...

Can you post a link to the ISP's terms of service that shows they permit such sharing? As our rules say, "Also, please note that almost every ISP prohibits sharing your Internet connection with another home, and we will not assist you in breaking their rules."
 

Read other 3 answers
RELEVANCY SCORE 74.4

I am using a TP-Link TD-W8960N as my main router with ADSL connection.

It works fine but on the top floor our signal is pretty low.

I want to us the Thomson SpeedTouch TG587nv2 (O2 Wireless box IV) as a secondary wireless repeater.

I can't use a ethernet cable between them. I want to make a wireless bridge or use WDS.

Please can someone give me advice on how to do this?

Thanks very much
 

A:Using the Thomson SpeedTouch TG587nv2 as a secondary wireless router/repeater?

user manual here
http://www.technicolorbroadbandpart...ways/products/product-detail.php?id=208&seg=3

does not look like you can
 

Read other 3 answers
RELEVANCY SCORE 71.2

i want to know how to configure the frame relay in cisco packet tracer if any knows pls send the wholw configuration file and packet tracer file.
 

Read other answers
RELEVANCY SCORE 71.2

Hi all,

I am new to TechSpot. Actually, I need some help setting up my wireless network at home. currently, I am using Dlink 502T DSL router for internet and trying to connect the Dlink router to Netgear wireless router WGR614 for wirelss internet connection to other PC's. Could anybody please tell me how to connect these routers. I am trying to connect Dlink with netgear but i am unable to configure the same. When i use Dlink router directly with the PC, my internet works fine but when i try to use netgear inbetween Dlink router and a PC, my internet stops working. Please suggest. I want to distribute internet to my other computer thru netgear wireless router. please help...

ndhingra
http://www.techspot.com/vb/images/icons/icon5.gif
 

A:how to configure Dlink ADSL router and Netgear Wireless router for internet distrib

Ndhingra said:



Hi all,

I am new to TechSpot. Actually, I need some help setting up my wireless network at home. currently, I am using Dlink 502T DSL router for internet and trying to connect the Dlink router to Netgear wireless router WGR614 for wirelss internet connection to other PC's. Could anybody please tell me how to connect these routers. I am trying to connect Dlink with netgear but i am unable to configure the same. When i use Dlink router directly with the PC, my internet works fine but when i try to use netgear inbetween Dlink router and a PC, my internet stops working. Please suggest. I want to distribute internet to my other computer thru netgear wireless router. please help...

ndhingra
http://www.techspot.com/vb/images/icons/icon5.gifClick to expand...


The easiest way is to run the CD that should have come with the Router, if you havent got it then you will have to configure it manually.

Full instructions can be found on the netgear website here.

Regards
 

Read other 1 answers
RELEVANCY SCORE 67.6

i have bought wireless-G Router(cwr-854) will you please tell me how to fix and to use it

thanks and regards
yassin
 

A:Configure wireless router.

i have adsl conection ineed to acces through my laptop and other dvices by wirels
 

Read other 2 answers
RELEVANCY SCORE 67.6

Apparently this is a common problem but I'm unable to fix it:
I have a DSL modem (Bell Sympatico) and a wireless router (D-Link WBR-2310). I made a wireless network which works fine, but I want to enable encryption and need to access the router's configuration screen at 192.168.0.1.

Trouble is I can't seem to access it - my browser attempts to connect to it as a web address.

I've been told I need to set a static IP, so I changed my IP to 192.168.0.2 and the default gateway and DNS server to 192.168.0.1. This didn't work - in fact after I did this I couldn't connect to ANYTHING. So I must have done something wrong. Clearly I don't know what I"m doing and am in over my head

Anyway, here's ipconfig-all:
-----------

Windows IP Configuration

Host Name . . . . . . . . . . . . : rob-d4997e1c357
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : no-domain-set.bellcanada
no-domain-set.bellcanada

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . : no-domain-set.bellcanada
Description . . . . . . . . . . . : LAN-Express IEEE 802.11 PCI Adapter
Physical Address. . . . . . . . . : 00-02-8A-E0-E2-12
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.2.12
Subnet Mask . . . . . . . . . . . : 255.... Read more

A:Cannot configure wireless router

Read other 8 answers
RELEVANCY SCORE 66.8

I have two subnets on my home network, one for my family's Internet access and one for my video surveillance system.

https:[email protected]/14869987704/

Sorry for the link rather than inserting a picture but I don't have an account anywhere I can link to the picture or don't know how from Flickr.

It all works correctly except for the wireless connection on the video network. I'm trying to use the wireless router as an access point instead of router; maybe that just won't work with the two routers I've tried. Alternatively, I could have a third subnet for the wireless cameras but I am unsure how to make that work so that the dual-homed PC could access it.

What is best? To buy an access point rather than a router? Or manual route to a third subnet? If the latter, I'd appreciate any instruction on how to configure it. I've read some articles from various router makers on it but it's still not clear.

Thanks,

Dale
 

A:How to configure wireless router on 2nd subnet

Read other 10 answers
RELEVANCY SCORE 66.8

My cousin is using AOL DSL services. Before he can access the web he must log-in his AOL username and password on the computer. I notice it is not a constant connection like RCN or Pacbell service, where it does not require users to log-in. Which automatically obtain the IP dynamically or with a static IP the user put in.

The problem is that he recently bought a Linksys Wireless Router from Fry's Electronics and the other wireless device attach to the computers and laptops. We are not sure how to configure the Linksys Wireless router.

Please let me know if you encounter the same problem and was able to resolve it.

Thanks in advance.
Charlton
 

A:How to Configure Linksys Wireless Router to use with AOL ISP?

Read other 6 answers
RELEVANCY SCORE 66.8

I have an Asus wireless WL-520GU that I have a wired connection to my PC. Why, because I am using the wireless only to allow access to my webradio.

Problem is the web radio connects 50% of time. Other times to connect I need to manually configure on webradio to connect to connect to wireless. It works sometimes other times not. I haven't been be to get to point of securing the SSID. So probalby someone is stealing my bandwith.

Now to explain my setup, my modem is connected to my Linksys 2102 adapter (used for VOIP) which to connected to the Lan port on the router.

I can surf the web on the PC, but trying to establish a connection, the PC does not recognize a wireless device. I cannot even access the Asus web interface (192.168.1.1)

My default gateway is 192.168.0.1 that of the Linksys adapter,

How to enable SSID so I can lock it and I can access the wireless problem-free from the web radio (Aluratek) ?
 

A:Unable to configure wireless router

Read other 16 answers
RELEVANCY SCORE 66.4

I am an *****, i was messing around with my routers settings, and i accidentally clicked"use as an access point". now the dhcp server is turned off and when i use it to connect with my laptop through wireless, i get the WAN ip instead of the LAN ip. and i do not know how to get into the settings. I have reset the router many many times, and i hjave tried entering the WAN ip into IE7 and i get a msn search error or w/e. I* have a cheap Belkin F5D7230-4. and im hoping that i do not have to buy a new router
 

A:Cant configure my wireless router/access point

Hi,

Check out "Portforward.com" they have guides for using/accessing most routers, including forgotten passwords etc.

Regards, Ellgor.
 

Read other 16 answers
RELEVANCY SCORE 66.4

Ok, not sure if this is possible but I am sure someone will set me straight. Here is the setup I currently have. I have a Netgear wireless router connected to a couple of computers, no problems at all with it, next, in another room, I have a desktop computer with a wireless card installed to access my network. Is it possible to hook my extra wireless router (D-Link DI524) to this computer and configure it to act like an access point to extend my signal further through my house? If so how is this done? I need detailed instructions. Someone told me I could do it this way with a crossover cable attached to the computer and the router....is this true? Any help would be great. Thanks, Mike
 

A:Need help to configure wireless router as access point

Read other 10 answers
RELEVANCY SCORE 66.4

I have tried two wireless routers and couldn't connect
to the configuration page on either

I have tried manually assigning IP the correct adress which didn't help
I have tried resetting the routers, using automatic configurations,
using different browser softwares;
just about any normal soloution you could think of.

the routers are both new and I assume both working,
both display an adsl connection, the pc displays the LAN connection.

but I just can't open the http://192.168.0.1 type pages. It's driving me crazy

the problem must be with my pc, but I don't know what.

releasing and renewing ip from the router's factory settings didn't help either.

any ideas what it could be? I have spent over 30 hours of research and messing about to get it working

I seen some guy talking about winshock or something in the cmd functions, please help me.

here is my ip settings from the cmd ipconfig/all:

Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : Intel(R) 82559 Fast Ethernet LOM wit
h Basic Alert on LAN*
Physical Address. . . . . . . . . : 00-03-47-16-E7-6D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.2.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 192.168.2.1
192.168.2.1
Lease Obtained. . . . . . . . .... Read more

A:Solved: Can't connect to configure wireless router

Try the router's address: Default Gateway . . . . . . . . . : 192.168.2.1

Note the '2' instead of '0' in the third position.
 

Read other 2 answers
RELEVANCY SCORE 66.4

I purchased a Linksys WRT54G wireless router (version 4) from amazon and when it arrived in the mail, there was no CD with it. I thought it was a new router, but I think it must have been used as it has a goodwill price tag on the underside of it. How do I get this router to send a wireless signal throughout my house without the CD?

So far I have connect the blue ethernet cord from the router to my internet modem and another ethernet cord from my router to my computer. I also have both the wireless router and the internet modem powered up. There is one numbered light on which is where I have the ethernet cord from the computer connected to the router and the internet light is blinking.

I have done several internet searches trying to find how I can send a wireless signal through my house with this router and the main thing I got was to go to the address 192.168.1.1 and configure my router. The thing is though, is that while I can configure the router with a password and everything, I still cannot get connected to the internet. Can anyone walk me through this step by step?
 

A:How to configure linksys WRT54G wireless router without CD?

http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G

That should have everything you need.
 

Read other 3 answers
RELEVANCY SCORE 66.4

Hi. Need a lot of help here please......
Let me quickly describe the situation.

I have an ADSL broadband router.
I have recently purchased a NETGEAR WGT 624 wirless router so that I can connect laptops to our network.

Following advice posted on this site previously, I have use lan cable to connect the ADSL router to the netgear. I somehow managed to turn off the DHCP server and have set a static address. I have no idea how i did this or what the static address is, as I fiddled a lot and somehow got it to work.

As I sit here my laptop is able to connect to the wireless network and pick up the network called NETGEAR. It is only a local connection however and does not pickup the internet.
If I plug in a lan cable from the NETGEAR to the laptop, I then have internet connectivety.

The main problem is I have no idea how to configure the netgear router. The manual says:

To log into your router after you have configured your router, do the following:
1. Type http://www.routerlogin.net in the address field of Internet Explorer or Netscape®
Navigator.
When prompted, enter admin for the router user name and password for the router password,
both in lower case letters (or enter the password you chose if you changed it during the setup
in “Initial Configuration” on page 3-2).
Note: The router user name and password are not the same as any user name or password you
may use to log in to your Internet connection.

When I follow these instructions, my browser (firefox and internet exp... Read more

A:Configure Netgear WGT624 wireless router

Read other 10 answers
RELEVANCY SCORE 65.6

I just purchase a Trendnet 432brp wireless router and I'm struggling with getting it working.
First I put in the EasyGo CD for installing the router and followed the instructions to the letter but the connection of the ethernet cable from the router to the computer was not recognized.
No configuration can take place without the internet connection and that can't take place unless the computer recognizes the ethernet cable. Help !!
 

A:Trendnet 432brp wireless router configure problems

Please supply the following info, exact make and models of the equipment please.

Name of your ISP (Internet Service Provider).
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Version and patch level of Windows on all affected machines, i.e. XP (Home or Pro), SP1-SP2-SP3, Vista (Home, Business, Ultimate), etc.
The Internet Browser in use, IE, Firefox, Opera, etc.


Please give an exact description of your problem symptoms, including the exact text of any error messages.


If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms?
For wireless issues, have you disabled all encryption on the router to see if you can connect that way?
Have you connected directly to the broadband modem to see if this is a router or modem/ISP issue?
If there are other computers on the same network, are they experiencing the same issue, or do they function normally?


On any affected computer, I'd also like to see this:

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

Type the following commands on separate lines, following each one with the Enter key:

PING 206.190.60.37

PING yahoo.com

NBTSTAT -n

IPCONFIG /ALL

Right click in the comm... Read more

Read other 1 answers
RELEVANCY SCORE 64.4

I have a sagem 3304 wifi modem router provided by the telecoms company. it has a limited wifi range and in my experience of wifi it also has frequent dropouts/connection problems. we connect the desktop pc to it by ethernet and that's just fine.

we also were given (by a 3rd party) a belkin n1 wireless router (the model without modem) and would like to try it out to be the wifi router. The idea is to connect it by ethernet to the sagem and place it in a more central part of the property. I reckon about 15m of ethernet cable. we would disable the wifi on the sagem. had we been given the belkin model with internal modem, this would not be an issue and we would not need to use the sagem at all - that is not meant to sound ungrateful!!

can anyone see any pitfalls with this? or if it is do-able, any recommendations re:configs?

I have found another post loosely related to using 2 routers however it doesn't really address this specifically:
http://forums.techguy.org/networking/715999-using-2-routers-same-time.html
 

A:Connecting a wireless router to a modem router via ethernet?

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!

This procedure bypasses the routing function (NAT layer) and configures the router as a switch (or wireless access point for wireless routers).
 

Read other 3 answers
RELEVANCY SCORE 63.6

Hi, I currently connect to the internet through a wired ethernet port in the wall which connects to my university's network.

I want to make this wireless since I bought a new macbook and was wondering if this product would do it? http://www.amazon.co.uk/dp/B006PYGWG6

I don't know much about it but I was concerned because the Router Mode says 'cable connection only' and I'm not sure the connection is cable (is it ADSL?). Will I need anything else like a modem?

Any advice?
 

A:Making an ethernet university connection wireless with TP-LINK Wireless Travel Router

Read other 6 answers
RELEVANCY SCORE 63.6

Allright, after trying fro 2 days i really hope i can get some help ;-)

3 PC` s ----- laptop win7 no probs
Desktop winxp No probs
Desktop winxp Can not ping the modem comes up with limited or no connectivity.
Try repair : following action cannot be completed. Renewing your ip addres

Try network diagnostics: under Network adapters it says 2WireGateway USB "Failed". There is only one networkcard in the pc and thats not this one. (how can i get rid of this?)
Then it shows Gigabit Ethernet network PCI adapter (Rev D) (Passed)

Between the 2 desktops i use one cable and the same connection to number 1 at the modem.
This means its not the cable. And not the modem.

Any one who has advice.
Thanks heaps and a lot in andvance. Please let me know if you need more info.

The modem does not detect the pc. The pc does not show up in the devices list on the modem.
 

A:Solved: Thomson TG 782T ethernet connection

For the two desktops please show the following (and identify the problem PC if it is not obvious).

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 2 answers
RELEVANCY SCORE 63.2

My question is regarding our needs for a router/routers.

Our current setup consists of an ethernet broadband router (where everything plugs in) in the "main box" that holds all of the wiring that then goes throughout the house into the bedrooms/den/kitchen desk via cat 5 wiring.

At each of those room locations you can then plug into the wall (cat5) for internet/phone/etc. We have many items that use wifi (iphone, tablets, roku and laptops) so we have plugged a wireless router into the cat 5 jack in the den, then plugged the desktop computer in that room into the wireless router. The rest of the items are used wirelessly throughout the house.

Well our broadband router up in the "main box" we think is going bad (guess is its 8 yrs old). Our internet lately has been patchy, slow and needing to be reset often. Upon speaking with our ISP, they say the connection to the dish on the deck from their tower on the neighboring hillside is "excellent", so we are thinking it must be the router installed when the home was built.

My husband logs on to his work computer from home with gotomypc.com and works on (enormous) spreadsheets, so we need speeds to be fast to keep his sanity. Our current service is 4mbps.

Now my questions finally, 1) do we need the 2 routers i.e. the broadband router in the "main box" with a wireless router in the den or can we do everything we need with one router in the "main box"? The "main box" is ... Read more

A:Ethernet broadband router and/or wireless router

Read other 6 answers
RELEVANCY SCORE 63.2

Hello, wondering if I could anyone could help me out.
My father used to have SBC DSL and used a 2WIRE-wireless router. He liked being able to have his computer connect to the internet downstairs and connect by access point with his laptop upstairs. Well he moved and now has DSL through anther phone company(www.NETNET.com) He now connects through a ethernet router. Not sure how to use the wireless router as well as the ethernet router? Thank you for anyone who takes the time to help out!
 

A:Connecting a DSL ethernet router and wireless router

Can't he just use the wireless router and not the ethernet router?
 

Read other 2 answers
RELEVANCY SCORE 61.2

netgear n300 wireless
wnr 2000 v4

Ethernet cable connections are ok
The computers that connect wirelessly have to be restarted often to regain connection.
 

A:ethernet/wireless router

from one of the computers - can we see an xirrus screen shot please

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply

http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
( the site now appears to require a business email, and does not allow webbased emails like gmail,hotmail or yahoo etc )

Use the links below

http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html
http://www.softpedia.com/progDownload/Xirrus-Wi-Fi-Monitor-Download-99109.html

Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You will need to have NET Framework installed for the WiFi Inspector to function.
On windows 8 - (i do not have windows 8) but, it would appear that, When you first try to run, you may get a message that .net framework is needed, and included in that message is a link to download/install.

Run the program

A user... Read more

Read other 2 answers
RELEVANCY SCORE 60.8

Hi all ,

I have a Thomson TG 587n router that for some strange reason blocks all HTTP traffic. When connected , downloads work fine as do torrents, p2p applications , and streaming radio. however ALL HTTP traffic is blocked . From ANY browser. Websites appear as 'loading' until i get a timeout blank screen.

I've tried updating the firmware but i cant find ANY firmware information on this online. (not even on the company site).

I've also tried using it as a switch in bridge mode with another router and the same problem persists.

Here are the specs on it.

http://www.modem-help.co.uk/Alcatel/TG587n-v2-Multi-User-Wireless-Hyper-N-Gateway.html

Does anyone have any ideas ?
 

Read other answers
RELEVANCY SCORE 60.8

I just installed my speedtouch router,and seem to have configered it ok. I am new to routers dont no nofing about them.

But it seems to me after doing on line tests (shildes up) i dont need a firewall on my system windows xp as my router got one installed, am i right in beleving this or do i still need zonealarm running..

Does anyone now where i can get a good setup manual, so i can setup two desktops running windows xp. as speedtouch manual does not explain it to someone who nows nofing about routers.. thanking you.....
 

A:Thomson speedtouch 530 router:

You don't really need a software firewall (such as zonealarm) if you are behind a NAT Router. A NAT Router does a god job of keeping unwanted incoming packets out, so thats fine. If you still want an outgoing firewall then keep the software firewall, but you don't really need one.
 

Read other 1 answers
RELEVANCY SCORE 60.8

I am offered a Thomson TG585 router by my ISP, I do not have a network card or anything on my desktop PC, will this unit work with a USB Wireless adaptor please. Thanks in advance Teriel9
 

A:Thomson TG585 router

Read other 6 answers
RELEVANCY SCORE 60.8

tg585 v8, thomson router wifi, keeps freezing when in certain sites and cuts internet off
 

A:modem thomson router

more details needed
 

Read other 1 answers
RELEVANCY SCORE 60.4

Hello, friends,

So, I have a weird issue. The other day, I was playing League and my connection started dropping. I spent a couple of days troubleshooting everything I could think of - using multiple PCs, swapping ethernet ports, messing with my router, etc. After a lot of frustration, I had an idea.

Now, on my roommate's PC, he could play League with no issue. On my laptop and my desktop, I couldn't do anything without my connection failing. Bear in mind, I'm hard wired and he's on wifi. Now, our router has a 2.4 ghz band and a 5 ghz band. His wifi connection is on the 5 band, and, as I mentioned, he had no issues. I asked him to swap over to the 2.4 connection, and all of a sudden, lag spikes everywhere.

So, from that we managed to deduce that the 2.4 ghz band on our router is dying. That's all well and good, but now we have another issue - why is our network connection trying to force its way through the wireless router? We tried hardwiring 4 different PCs, and 3 of them are defaulting to the wireless router networks, even when the wireless adapters are turned off. My laptop and desktop are defaulting to 2.4, my roommate's desktop is defaulting to 5, and our last desktop is connection just to "Network". Below is a screenshot of my network connections.
I tried doing an ipconfig /release, /renew, /flushdns, but I got the following error - "The operation failed as no adapter is in the state permissible for this operation." I'm completely ... Read more

A:Ethernet connection going through wireless router

Welcome to the forum!

Choose to "forget" the wireless network. Turn off wireless SSID broadcast on the router. Unselect "connect automatically" for the wireless network. Select "connect automatically" for the wired network.

Read other 9 answers
RELEVANCY SCORE 60.4

Hello,

I have a hopefully simple problem to solve!
I'm in a shared house and the wireless router lives just outside my room. However, the wireless has been playing up a lot lately and keeps dropping out.

I have an ethernet cable connected from my PC to my PS3.

Can I remove this from the pS3 and connect it to the ethernet port on the router to get a wired connection?
I tried it but it would only pick up the wireless and, when I disabled the wireless dongle, nothing at all!

Is there some setting I need to make to 'active' the ethernet connection?

The Router is an O2 Wireless II box. I have Windows 7 Ultimate.

What the lights on the O2 wireless box mean - Support - O2

I may end up getting a separate service put in, because the dropping out is really annoying, but I thought this would be a relatively simple stopgap solution!

Thanks
Mark

A:Ethernet/Wireless router confusion...

For the wireless dropping out problem, have you tried using a different channel in the router's wireless connection settings?

You can scan the area around your house using this Xirrus wi-fi inspector which will help you find an unused channel in your area.

Xirrus: The Leader in High Performance Wi-Fi - Advanced IT Wi-Fi Networking Tools

As for the wired connection, assuming the DHCP is enabled, it should work as soon as you plug in the eithernet cable. If not, then you might need to download some drivers for your wired eithernet adaptor.

Read other 2 answers
RELEVANCY SCORE 60.4

*I am not tech savvy, at all! I will need specifics on HOW to get somewhere/do something. A lot of the terminology used is completely foreign to me.* ​
Weeks ago, my Toshiba Satellite P755-S5215 suddenly stopped having internet access. Instead of a 'connection' icon, I had a computer (??) icon with a red X over it. It said there were no drivers installed. At the time, I had the phone/email support of my computer-knowledgeable ex-husband, who has since decided to stop offering his help. With him, I was able to re-install all network adapters (which were showing the yellow triangle/exclamation mark..I have 7 WAN Miniports that still show this). I tried rebooting in safe-mode, I tried system restore (it says the specified object was not found), and when I tried to run the recovery disc, I go a pop-up message that said "This program does not have a file associated with it for performing this action..."

I did something, as I now get the 'connection' icon, however it has the red X, and says no connections are available. My sons' computers/phones/tablets pick up the wireless, so I know there are connections available. I also tried to connect using an ethernet cable, but that didn't work, either.

I appreciate any help that anyone has!
Thank you!
 

A:No wireless or ethernet connection - not router

Read other 16 answers
RELEVANCY SCORE 60.4

Greetings:

Our home school's having trouble attaching a wireless router to my XP PC's ethernet port.

Our donated vintage Macs and XP machines are tied to the internet via a cable box's wireless router. Works just fine. Now I wish to boost the signal to a building beyond the local area by attaching a wireless router to a Dell 260 running XP. This router's IP is 192.168.11.1 (ON) and 192.168.11.100 (OFF), and I've spent hours with the Connection Wizard thing on XP trying to create a ethernet path to the router but I can't find a configuration that states an ethernet path or channel. The modem lights normally and other machines can pick up and connect with its signal but there's no real transmission, the receiver machines getting:

Firefox can't find the server at http://www.acorn.com.
Check the address for typing errors such as ww.example.com instead of http://www.example.com
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Ironically, the router works just great on the Macs, which has both Airport on to receive signals from a cable TV wireless router and also has its shared Ethernet connection on, and the ethernet side requires no IP configuration like it seems you must on the XP's internet connection page. The router in question just plugs in the Mac and transmits just fine. I... Read more

Read other answers
RELEVANCY SCORE 60

Hi,

For a school project, we programmed a DHCP relay on a PIC development board, which has 1 ethernet port. So to test it, we need to set up the relay and the clients in one subnet, and a DHCP server in another subnet.

We've been given a TRENDnet TW100-S4W1CA router, which has 4 LAN ports and 1 WAN port. Our plan was to connect the DHCP server with the WAN port and the relay & clients with LAN ports. I made a diagram of this setup:

The problem is that with this configuration, it's not possible for us to ping the DHCP server from a client. The network is unreachable. So all DHCP discover packets sent from the clients never get past the router to the other subnet containing the DHCP server.

The configuration is quite simple though: the router is assigned a static IP for it's WAN interface: 192.168.1.1 and for the ISP gateway address we entered the IP of the DHCP server (192.168.1.2).

Does anyone here know why this doesn't work?
Much appreciated.
 

A:Testing a DHCP relay - two subnets, one router

Do you have pings working between the DHCP server and the router?
 

Read other 3 answers
RELEVANCY SCORE 60

Problem: I can't access it

Some specifics; NO firewall issue, latest firmware & router is working properly in every possible way ( except the me not being able to access it part..) And the operating system I'm on is Microsoft Windows XP Home Edition (5.1, Build 2600)

( Ask me anything else you need to know )

So what I've tried..

I tried reset (duh), I tried changing the address I use to go on the router (static ip kinda..), I tried different browsers from IE to Avant & Firefox, I tried cmd telnet

In general everything I've been able to think of doesn't work and I know FOR CERTAIN that the router itself is fine and perfect with the firmware and etc possible..

Since I also got another router from a friend and a laptop.. I tried both routers on the laptop and they work, consequently neither of them work on my CPU

And I have no idea what could be the reason for this since as I said there is NO FIREWALL and anything else basic that could tinker with it..

So.. Please.... Any ideas? Advice? Am I missing something obvious? x.x help me
 

A:Router: Thomson Speedtouch 585v7

Read other 14 answers
RELEVANCY SCORE 60

I live in a shared house and one of the tenants, who is away for weeks at a time leaves his p2p sharing program running 24/7 eating every last bit of the bandwidth in the house. I have spoken to him on several occasions but to no avail.

I read about blocking the ip address of his computer but the instructions did not accomplish what I required.

I telnet into my router, log in with Admin and Pass

{Administrator}=>firewall
{Administrator}[firewall]=>rule add
chain = forward_level_Standard
[index] =
[name] =
[clink] =
[srcintf] =

this is as far as I have got as these were not included in the instructions I read previously, elsewhere.
Any help would be greatly appreciated

thanks in advance
 

A:Solved: Thomson 585 V7 Router Ip blocking

ok i accomplished my end goal using mac filtering in telnet instead of trying to block the ip

wireless macacl add hwaddr=00:xx:xx:xx:xx permission=deny
 

Read other 1 answers
RELEVANCY SCORE 60

Executive summary:

I want to add a win98 laptop to my network which consists of a desktop that receives a wireless signal from a router. The laptop would connect to this desktop with an ethernet cable.

Here is my detailed setup:

I.
A) Internet comes in through the wall to a Shaw surfboard, then uplinks to a D-Link router (DI 524 - a bit old).

B)The router sends wireless signals flying across the apartment to my desktop
i)which has a wireless ring receiver thingie (http://i265.photobucket.com/albums/ii221/computer-camp/ASUS Wireless Antenna/oly3646.jpg)
ii)The router also connects directly to my girlfriend's computer via ethernet, but that's not important right now.

II.
A) My desktop has two ethernet ports.
B) The desktop connects to a laptop running win98 (best for playing old games - at least the ones that don't run so well on DosBox)
i)The laptop has an IP when I use ipconfig to check what it sees. This IP is 169.254.122.9
ii)The laptop also shows a default gateway: 255.255.0.0

III.
A) When I look at the network, I can see my computer and my girlfriend's. I cannot see the win98 laptop. I suspect I must make changes to its network settings so that I can see it in the list of computers. I might have to bridge some connections? Enable internet connection sharing on the laptop? (AND desktop??) I'm not sure.

additional info: pinging 169.254.122.9 from the desktop: request times out.

ipconfig info for the desktop:
DHCP enabled: yes
Autoconfig e... Read more

A:Is this possible? wireless router + desktop + ethernet + win98

Read other 16 answers
RELEVANCY SCORE 60

Friends -

I am a comcast cablemodem subscriber, and recently upgraded some of my hardware, including a new Motorola modem, which is working fine, and a new Linksys Wireless Router, which doesn't seem to be working fine. The Linksys is talking to two wireless laptops and three desktops, all running Windows XP with SP2 and up to date on all security & patches.

The wireless laptops have no trouble with internet access through the new router, however, two of my three desktops which are connected to the router via standard 10-base-T ethernet cable are having sporadic internet connectivity. The desktop through which the router was installed never has any difficulty with its internet connection. Swapping the cables among the 4 ports on the router doesn't make any difference. All of the default settings were taken with the router's installation (no domain/host indicated), and DHCP for assignment of IP/DNS addresses. Installation was successful. All three of the desktops show a live connection to the LAN at 100 Mbs, even when the two affected desktops can't access the internet. The phenomenon is the same for Netscape, Mozilla, and IE browsers. The TC/PIP settings on each of the desktops are set for "auto" when obtaining the IP and DNS addresses. Comcast will not provide a static IP address to use for the DNS setting, and says that their policy is to use DHCP to assign the addresses. Linksys has been unhelpful.

The cables and ethernet cards are all ... Read more

A:Ethernet Troubleshooting on a Linksys Wireless Router

Make sure your Linksys router has the latest firmware. You can update it from www.linksys.com
 

Read other 2 answers
RELEVANCY SCORE 60

Hello,

My problem is that I can not access the internet and print at the same time. I access the internet thru a modem with a ethernet connection directly to my laptop and I also have a wireless router (TrendNet 54 Mbps, TEW-432BRP) that I use to connect 2 printers.

If I want to use the internet I have to disconnect the wireless router and then if I want to print, I have to re-connect the wireless router which then prevents me from accessing the internet. I can only connect to one of these at a time which is driving me crazy.

I also receive error messages about ip address conflicts on my laptop so I don't know if this has anything to do with my problem. I hope someone can help me with this.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Celeron(R) CPU B815 @ 1.60GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 2
RAM: 4039 Mb
Graphics Card: Intel(R) HD Graphics Family, 1795 Mb
Hard Drives: C: Total - 260242 MB, Free - 119605 MB; D: Total - 29690 MB, Free - 27423 MB;
Motherboard: LENOVO, Base Board Product Name
Antivirus: Microsoft Security Essentials, Updated and Enabled

Thanks & God bless,

Patrick
 

A:Solved: Ethernet & Wireless router problems

Read other 13 answers
RELEVANCY SCORE 60

I have a Belkin G wireless router connected to an Arris modem (Comcast).
I am trying to connect a laptop and an android phone. There is also a PC connected to the wireless router via an ethernet cable.

When the PC is connected, the speed of the wireless connection drops significantly.
From my phone speedtest shows ping 13ms, 27.75 down and 24.18 up when the PC is not connected. When the PC is connected, speedtest shows ping 20ms, 0.2 down, and 0.1 up (if the connection doesn't time out.)

It seems the ethernet connection is taking nearly all the bandwidth and the wireless devices just won't work. How can I give equal bandwidth to the wired and wireless connections?
 

A:Wireless router won't work with ethernet connected

Read other 9 answers
RELEVANCY SCORE 60

Hello,

Thank you very much for your consideration of my problem. I reviewed a couple different searches, but I could no find no information to solve my current problem.

I am running Windows XP Home edition on a Compaq Presario. I have high-speed cable internet through Road Runner, which works very well on my desktop computer. Because of my laptop, I wanted to set up a wireless network, so I purchased a Linksys WRT54GS. For a time, the router allowed my desktop to work on a LAN connection, although the laptop couldn't seem to use the wireless router. The laptop was a budget Toshiba Satellite L35, so I thought maybe the laptop was the problem, but since I have successfully picked up wireless in a few different places outside the home with the laptop.

After about a month, the LAN connection stopped working with the desktop. I believe this occurred after the cable company replaced my modem with a new one. Currently, I have the internet running from the cable modem directly to the desktop. When I plug the desktop into the router by ethernet cord, the power light is solid as is the WLAN light, and the "1" light and the internet light. However, my computer is unable to connect to the internet ("Server not found"). Because of this I can't access the router settings page online, nor can I access wireless from my laptop. Finally, the set-up disk was sadly broken.

Any help or suggestions are greatly appreciated.
 

A:Ethernet and Wireless Issues Linksys Router

Read other 8 answers
RELEVANCY SCORE 60

My trusty linksys wireless router got fried in a recent electrical storm. While waiting for a new d-link "airplus extreme g" to come in, I've been relying on old wireless routers lying around, like a netgear WGR614 v6.

I connect to the router via ethernet because a) I have a desktop and b) no wireless router I've ever used has allowed me to work in sshell without dropping me after a few minutes. I do a lot of work in shell and after the linksys fried, if I wanted to run a program that takes a while, I had to take everyone off the wireless router and connect to the modem directly. I was hoping my new d-link would solve the problem, but so far things are actually much worse.

I'm still connected via ethernet only but now I get "a network cable connection is unplugged" about every 15 seconds (or less). Again, I never had this problem with the linksys but the other modems I've tried since have been pretty problematic, dropping all the ethernet-connected computers on the network. Any ideas?
EDITED: updated the firmware, that seems to help ... please ignore this message until I know I'm stuck again! I would delete it, but that doesn't seem possible.
 

Read other answers
RELEVANCY SCORE 60

I need to connect my W98 SE PC to my wireless router via ethernet cable so I can change the router's settings. I have never used the ethernet adapter on the this PC. DO I have to install any software first? I have been accessing the router via a wireless adapter. Could it be (I hope) as simple as plugging in the wire between the PC and one of the 4 router ports? Does the router signal the PC or will I need to reboot?
Sorry for the "dumb" questions but I know I always get good advice from you guys, and learn in the process.
 

A:Setting up direct ethernet to wireless router

If you can access the router via wireless you can configure it from there as well.
 

Read other 3 answers
RELEVANCY SCORE 60

I have had Windows 10 for a while and haven't had this problem until today. My connection was fine until I woke up this morning. I have tried updating my drivers but none are corrupt and are up to date. I have tried several solutions and looked at many videos and I cannot find a fix. Can anyone help?

A:My Ethernet cable nor wireless detects router.

Hi Dez37, welcome to the forums. Go to start, search and type cmd right click on the returned command prompt and select run as administrator, at the prompt copy paste:-

ipconfig/all > 0 & notepad 0 (press enter) Please post the notepad outcome here.

Also go to start, search and type devmgmt.msc, press enter, device manager will open, expand the tree under network adapters, tell us what you see.

Try a power cycle, turn off the modem/router and remove all power to it, turn off your computer and remove all power to it (if a laptop take out the battery) with the power off press the computer start button for a second, this will drain any residual power, leave the computer off. Now repower the modem/router and wait until it acquires all lead lights. Once this happens repower your computer, test your connection now.

Read other 13 answers
RELEVANCY SCORE 60

I was on here last night trying to get my laptop to connect to wireless internet. I'm still working on figuring that out with the person I bought the laptop from and I may end up purchasing a wireless card, but now my question is:

Can I connect to the internet right now by using an ethernet network cable plugged into my computer and into the D-link router which my desktop computer already accesses the internet from?

I plugged it in but nothing happened.
 

A:Using an ethernet cable to connect to wireless router..

Read other 12 answers