Over 1 million tech questions and answers.

My Computer Can't detect my new graphics card

Q: My Computer Can't detect my new graphics card

I purchased a new GPU Sapphire Dual X R9 270X 2GB DDR5 OC WITH BOOST
My Graphics Card fan work fine but when I turn on my pc the monitor does not show anything.

I had another graphics card before but needed to replace it so I dont know if this is the trouble.

Anyone can help?

Thanks in advance

RELEVANCY SCORE 200
Preferred Solution: My Computer Can't detect my new graphics card

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: My Computer Can't detect my new graphics card

Do you have required power connections to it ?
Tried another PCIx slot ?
Monitor connected to the right place ?
Can't be problem because of another GPU for BOOT at least, in the OS later on maybe, if it's different than old one.

Read other 20 answers
RELEVANCY SCORE 74

Im not quite sure what the exact spec of my pc are, but here are a few

AMD Atholon 64 x2 dual core processor 4200+ 2.20ghz its a 32 bit operating system, i dont quite know alot about computers so please keep it rather basic, thanks.
 

A:Computer doesnt detect Graphics Card

You need to post the brand and model. That way we can find the model and see if you have slots to install a graphics card.
I'm guessing you have a graphics chip on the motherboard that has died.
 

Read other 1 answers
RELEVANCY SCORE 73.2

HELP. I tried uninstalling old nvidia drivers. When I put my new one in, there wasn't an old graphics card in place. I tried youtubing possible solutions. I'm considering taking my pc the best buy so they can hook it up, but I don't wanna spend more money. The power watts meet it's standard. I had to buy a new one. I KNOW it's in the right place inside, but my computer won't detect it. The PNY software DVD won't detect it. It says not found. I understand that you have to install a diver that's compatible, and I tried that, but it says checking system... and then It can't find it! It's been months. I uninstalled every nvidia driver or thing on my computer, which now makes my screen look small, which is really annoying. please help!
 

A:Computer won't Detect Nvidia Geforce 730 Graphics card

You need to tell use more about your computer, what is the make and model of it, what is the model of the motherboard, what is the model of the power supply? What version of Windows?

Is it the Geforce GT 730 you bought or something else? What is the intended use of the new graphics card?

And what graphics card or GPU did you have before adding this card?

Do you have the monitor connected to the new graphics card or do you by chance still have it connected to the integrated graphics that many computer have? It needs to be connected to the new card before turning the computer on.

Have you made sure the card is seated fully in the slot?

Have you tried using the latest drivers from the NVidia website: http://www.geforce.com/drivers

Do you have access to another computer to try the card to make sure its not defective?
 

Read other 1 answers
RELEVANCY SCORE 63.2

Hi!

Yesterday I bought myself a new graphics card: Radeon HD7870.
I've plugged it into my motherboard: MCP73VT-PM but the thing is that I don't receive any signal from it when I connect the vga cable into it, tried with hdmi cable aswell...
Also bought a new PSU 550V to make it match the requirements..

Can it be that the onboard vga graphics collides with the new card? If so... could anyone help me out? I've tried almost everything, spent the whole day trying to get it to work.

My BIOS settings doesnt support editing the onboard stuff.

Thanks in advance
 

A:Won't detect new graphics card

Read other 8 answers
RELEVANCY SCORE 63.2

Hi

I need help here. I cannot detect my Graphics Card in Device Manager.I do anything but not working. This is my report

Read other answers
RELEVANCY SCORE 62.4

Hello dear community, I've just formatted my notebook again and installed Windows 7 Professional 64-bit. The problem is that system is unable to detect my graphics card - Radeon HD 7600M, which was working fine before. Device manager is showing it as a standard VGA graphics card. My notebook is also using Intel HD graphics 4000 and it's working fine after manually instaling required drivers. When I am trying to install drivers for Radeon, two things are happening: - setup manager returns error message that installation process failed(I've even tried to edit "InstallManager.cfg" file and change "WorkaroundInstall=false" to true, setup manager installed everything(AMD catalyst, etc.), just not the driver - as soon as setup manager is trying to detect my graphics card, blue screen appears and notebook is rebooting It is pretty random which one of the above things will happen. I've tried installing few different drivers and nothing changed. I've also tried(in the device manager) to manually choose the location with the driver - Windows tells me that system knows it's the Radeon HD 7600M device, but cannot install the drivers. During the format, I deleted ALL partitions and created new ones. I remember that there was a small partition(which I left untouched during the earlier notebook format), but this time I deleted it too. Maybe this partition had some important HP data which is causing this problem now? I am also attaching a screenshot of my device... Read more

A:Windows cannot detect my graphics card

Hi: I think that HP has the wrong switchable graphics driver listed on your notebook's support page. See if this W7 AMD/Intel graphics driver works. You must only install the AMD graphics driver, which installs the drivers for both the Intel and AMD GPU's. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58894.exe I don't understand the language shown in your screen shot. Can you translate to English what the other two devices that need drivers are? I'll take a guess and say that the PCI Device needs this driver... This package contains the driver that enables the Realtek Card Reader in supported notebook models that are running a supported operating system. The card reader enables users to read from or write to supported removable storage cards, which are typically used in digital cameras, digital music players, and cellular phones. http://ftp.hp.com/pub/softpaq/sp61501-... Read more

Read other 1 answers
RELEVANCY SCORE 62.4

Im trying to get more performance out of my laptop and cant detect the AMD graphics card. I cant see the card in device manager and if I try to download amd drivers and services, they dont work.Please help.

A:My z51-70 cant detect the amd r9 m375 graphics card.

Do you have switchable graphics turned on in BIOS?  Also is your laptop plugged in to outlet or running on battery?

Read other 1 answers
RELEVANCY SCORE 62.4

Hello,

I recently updated the drivers for my video card, NVIDIA's discrete GeForce GT 335M, and afterwards I was unable to get my monitor to display anything. My laptop screen is broken so I use a standalone monitor with VGA cables for my display. So after this I tried the obvious troubleshooting, using my fn key to switch between displays and holding the windows key + P to pick the projector option, both to no avail. I then started windows in safe mode and rolled back the most recent driver update for the video card. Since then my laptop does not detect the video card, like it is gone. I still have the updates installed, NVIDIA Control Panel still exist but says no card is detected.

Also I can not get BIOS to run on boot, possibly because my monitor won't display anything until it gets to the windows home screen.

Any help would be greatly appreciated, thanks,

Shawn

A:Unable to detect graphics card.

Get your Laptop screen fixed first.
You may need to spend less than $100, I guess.

http://www.amazon.com/ALIENWARE-LAPT.../dp/B0049AJ468

Read other 5 answers
RELEVANCY SCORE 62

Hello, I've been having this problem 2 days ago and it's a bit frustrating. I was just playing some games when it suddenly restarted automatically. My device manager doesn't seem to acknowledge my graphics card anymore for some apparent reason. I've tried plugging my monitor in my graphics card and it just seems like on a standby mode with the blank screen showing nothing. But when I plug my monitor to my motherboard port it shows up fine and is in the device manager. I've tried cleaning my drivers with "Driver Sweeper" then reinstalling the lastest driver for my graphics card, but that didn't do anything. I was hoping if anyone knows what's wrong with my graphics card . Thank you.

Is my graphics card burnt/broken?

EDIT:
Graphics card - Radeon x1900

A:System doesn't detect Graphics Card

OK first of all there are no drivers for Windows 7 supporting you card. Your card is not even supported by Windows Vista as support has been removed, therefore, the reason for the problems you have been experiencing is a driver issue not the card itself. You cannot use 6.5 drivers on you card, the reason why you are getting these blank screens and dropping out of games is because of the drivers.

Not the news you peobably wanted to here but an upgrade is needed the drivers which would have been used would have been Catalyst 9.3.

ATI Catalyst? Display Driver
Version 9.3

9.3 Operating System(s)

Windows Vista - 32-Bit Edition Products Supported

AMD has moved a number of DX9 ATI Radeon? graphics accelerators products to a legacy driver support structure. This change impacts Windows XP, Windows Vista, and Linux distributions. AMD has moved to a legacy software support structure for these graphics accelerator products in an effort to better focus development resources on future products.
The following products have been moved to the legacy software support structure (including Mobile and All-in-Wonder Variants):

ATI Radeon 9500 Series
ATI Radeon 9550 Series
ATI Radeon 9600 Series
ATI Radeon 9700 Series
ATI Radeon 9800 Series
ATI Radeon X300 Series
ATI Radeon X550 Series
ATI Radeon X600 Series
ATI Radeon X700 Series
ATI Radeon X800 Series
ATI Radeon X850 Series
ATI Radeon X1050 Series
ATI Radeon X1300 Series
ATI Radeon X1550 Series
ATI Radeon X1600 Series
ATI Radeon X1650 ... Read more

Read other 9 answers
RELEVANCY SCORE 62

First, my specs:

OS: Windows Vista
2.3ghz Intel Celeron
2 gigs of RAM
250gb HDD
GFXCard trying to install: Geforce FX 5200

Alright, so this is a simple question, shouldn't be difficult to answer!
I've read that sometimes you don't have to disable the Onboard Graphics in the BIOS when putting in the gfxcard. So, I stuck it in without disabling in hopes that I didn't have to. Well, the monitor won't turn on, so I just have to pull it back out of the processor. The weird thing is, it won't even turn on if I have the monitor plugged into the onboard gfx slot. It won't until I completely remove the GForce FX. So, I went into the BIOS and saw that the Primary is selected as PCI and not Onboard, even though I use chipset. Could that be why the monitor is getting confused?

But here's my main question, before I get started in all this: if I choose the Primary Video in BIOS as PCI-E, would I still be able to see the monitor once it turns back on? In other words, would I be able to change the bios back if the gfxcard don't work? Will the onboard video work regardless of what's chosen in the BIOS menu?

Would appreciate ANY help! Thanks in advance!

EDIT: oh, and hey does the GeForce FX 5200 support 1440x900 resolution? Could that be the problem it's not detecting it?
 

A:Installing Graphics Card - Monitor won't detect it?

Please post your system specs, To include Make and model System if Big Box, or same info for the following it custom or home built, Mother Board, Processor, Ram, Video Card, Hdd(s), Optical Drive(s), Power Supply Manufacturer Model, Wattage and Amperage on the +12V Rails, OS, and any other peripherals installed on the motherboard.
 

Read other 3 answers
RELEVANCY SCORE 62

I recently got a VGA-HDMI Cable, so I could link my TV to my computer, but when I went to plug it in, my computer did not detect it. I then tried to force my computer to detect it, as many of the things I saw online recommended this, but this did not work either.
Please help me!
Thanks
J
Also, if its any help, my graphics card is AMD Radeon HD 6400M Series, and as this is a laptop, I cant really get a new graphics card.
 

A:Graphics Card doesn't detect second monitor

Read other 7 answers
RELEVANCY SCORE 62

i have about a 5 yr old compaq running xp.i had bestbuy to put in a radeon 9550 avg graphics card and i had to restore my com now windows wont detect the card so when i try to install the soft ware it says it cant find any hardware to install the software.i could use any help plz and ty.
Edit/Delete Message
 

A:Windows doesn't detect my new graphics card

Double post

Already answered here: http://www.techspot.com/vb/topic112198.html
 

Read other 26 answers
RELEVANCY SCORE 62

Hello
I uninstalled my nvidia graphics card via device manager because I was having annoying freezes and nothing I tried fixed it. But when I restarted windows, the graphics cards didn't appear any more and I couldn't install the drivers back. Since it's a laptop I can't just unplug it and plug it in again. How do I get it back?

A:Uninstalled graphics card. Windows cannot detect it now

Do not try to install it through Device Manager.

I just did mine less than an hour ago. So maybe this will help.

After reboot W7 will load but have poor resolution. Go to where the Nvidia driver is downloaded (mine was in the Download folder) double click the Nvidia driver download and follow the prompts to install.

It may show it did not install the driver but don't worry just reboot when it is finished installing or says it didn't install properly.
That is what mine did and after a reboot all was installed properly.

Also after reboot the Monitor will show in Device Manager.

Mike

Read other 9 answers
RELEVANCY SCORE 62

Hey guys,
This is an important post for me as its regarding my Graphics Card (as i use it a lot). I have a Lenovo G400 laptop with intel i5 3230m , Windows 8.1 and Switchable Graphics(Intel HD 4000 and AMD Radeon HD 8750m). Recently this morning i kept my laptop for an download and went away from it for a while.Later when i returned i saw that my laptop was on lock screen. I unlocked it to see for the download and it said that could not detect hardware or hardware drivers for my AMD Graphics card. Later i saw it could not even detect my intel graphics card. I managed to download and install intel graphics card and it could detect it but when i tried to install amd grahpics drivers it failed.
It cant even detect the AMD Graphics Card.I tried a system restore and it didnt work. According to me it was due to an windows update recently(so i did a system restore).
This is pretty Important for me , so please reply all the suggestions you have
Thanks

A:Windows cannot detect my Graphics Card [IMPORTANT]

Well The Following Error is Solved. All i did was pray to god and shut down the laptop for a few hours after trying every thing and somehow it worked

Read other 1 answers
RELEVANCY SCORE 62

Hi,
(sorry, but this needs a bit of background)

I've been using a custom PC since June, picked the parts, got it put together in a shop. Recently, I've been having occasional BSODs and a message that says "PFN_LIST_CORRUPT". After the latest BSOD and reboot, my PC couldn't detect the GTX560 graphics card (from Palit) in device manager. Under display adapters it shows "Standard VGA Graphics Adapter" instead of the gtx560.

I tried to update the driver with the latest download from Nvidia (version 280.26), but when I try to it informs me "This graphics driver could not find compatible graphics hardware". I've reinstalled windows 7 and the drivers for Ethernet, motherboard, chipset, etc., but I've still got the same problem when trying to install the graphics driver.

When I open the "Properties" window of the "Standard VGA Graphics Adapter" in device manager, under details->hardware ids the following information is shown:
PCI\VEN_10DE&DEV_1209&SUBSYS_00000000&REV_A1
PCI\VEN_10DE&DEV_1209&SUBSYS_00000000
PCI\VEN_10DE&DEV_1209&REV_A1
PCI\VEN_10DE&DEV_1209
PCI\VEN_10DE&DEV_1209&CC_030000
PCI\VEN_10DE&DEV_1209&CC_0300

Any help?

A:[Help] Can't detect graphics card or install drivers

Hello syalam. Welcome to the Forum.

Have you made any changes or added any new hardware to your system around the time this error began to appear?

That VEN is nVidia, but the DEV is a Fast Ethernet Controller.
It could be that Windows has mixed up the registry folder for the device, or the plug and play feature in the video cards firmware could be corrupted, or there is another corruption in the system.

You can try reinstalling the video card clean:
Be sure you have the most current known good driver downloaded.
Create a System Restore Point.

Now go into Windows Explorer and in the C: drive find the nVidia folder (inside will be Drivers > your driver version) and delete it (the whole folder).
Go into Start > Control Panel > Remove a Program and uninstall all programs for the video card. Do PhysX and Stereoscopic 3D first, then the driver. The control panel will uninstall with the driver.

Shut down computer, wait 30 seconds, and then boot the computer.
When it reaches the desktop Windows will find new hardware and will install it's own WDDM1.1 driver. Let it. You will be asked to restart. Do it.
Once back on the desktop you can now install the nVidia driver package for your card.
Try that and see if it works. That PFN_LIST_CORRUPT error can be caused by other bad drivers too, and by bad RAM. But lets check that video card installation first.

Read other 9 answers
RELEVANCY SCORE 61.2

few days ago i tried to update my nvidia geforce gt 335m driver. but the update would not install, so i thought of deleting the nvidia driver and install the new version. i went to control panel(uninstall a program) and deleted everything with the name nvidia on it(physcs,graphics driver,control panel) now when i tied to install the new driver it said "this graphics driver could not find compatible graphics hardware. so , i went to device manager and the only display adapter there was intel hd graphics. and the intel processor pciexpress root port-0045 was showing "A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)" my laptop: alienware m11x r2 details:M11x R2 Specs & Latest News | Alienware | The Verge PLEASE HELP!!!

A:how to make device manager detect my graphics card?

Try using Driver Robot or Driver Pack solution 13 Search on google.

Read other 9 answers
RELEVANCY SCORE 61.2

hi
i have this big problem is that my graphics card as a problem that in almost 2 years it never did this
i never had problems with this computer
but what happend is that i use a LCD screen the resolution is use is 1768x992 and i use a Nvidia GeForce 9800 GT graphics card
what happends is that when i turn the computer on i see the screen with ALOT of lines with weird colors and i thought this was a drivers problem so i installed the graphics card drive and clean the PC up for the 2nd time nothing worked so i tried formating it but i doubt it that would work because those lines where there so yea
i did manage on getting a screen cap from the windows and it looks like this :

http://i954.photobucket.com/albums/a...9418/wtf-4.png
the weird part is that the lines and stuff that appear on the screen as well dont show up on the picture so i tried using another monitor and it had the same result
im using Windows Ultimate 32 bit
i have my graphics card connected to my TV(LCD) with a HDMI cable
i thought it could be that so i tried another cable it didnt work
so at this point i ran out of ideas
so i was wondering if you guys could help me
i really need my pc on my other drive i have stuff from work and i cant lose it for the life of me without counting the school stuff
please help me

A:graphics card doesnt detect monitor correctly

I don't know how this happened to you, but the picture is very typical for a desktop that's set to use only 16 colors.

Nowadays, videocards can render millions of colors with a 24-bit or 32-bit depth, this is called "True Color." Many moons ago, you had to make do with about 65 thousand colors (16-bit depth or "High Color"), and earlier still you only had 16 colors or 256 colors (8-bit depth) available.
Using such limited color palettes resulted in images such as the one you have on your screen now.

You should be able to go into your advanced videocard settings and change the color depth, but it would be extremely unusual for a modern nVidia card to offer only 16/256 colors. Still, can you check and see which color depths are actually available?

Read other 2 answers
RELEVANCY SCORE 61.2

So this is a strange issue that I don't think many people will even quite know what to say...
First I should say that I'm not that tech savvy, and I'm not much of the forum person, so if I've put this thread in the wrong place then I'm sorry. I'll try and give you as much information about my specs as possible:

Case: iBuyPower Revolt
Motherboard: AsRock B75M-ITX
Processor: Intel i3-3220 @ 3.30 GHz
Hard Drive: WD Blue 500 GB
Memory: 2 x 4 GB RAM
OS: Windows 8.1
Graphics Card: Geforce GTX 750 Ti
Power Supplies: 350W and 250W
And some DVD drive.

Right, so as you can see, my situation is a little complicated, as I have TWO power supplies. That story's even more complicated, but it doesn't matter so much, all that matters is that those two power supplies are what I have to work with. The 350W supply (which is the supply that I bought later on) is powering everything in my computer EXCEPT the graphics card. Then the 250W power supply (came stock with my computer) is powering the graphics card exclusively. Or at least, that's what's supposed to happen.

So I bought this graphics card about 6 months ago, and realized that I'd need more power for it. So I ordered a more powerful psu. When I realized the 350W psu didn't have the 6-pin pci-e power connector I needed, I realized that I'd have to use the paperclip method to power my graphics card with the 250W power supply instead. I sat the 250W psu outside my rig, powering the graphics card inside my computer ever since. Until about a... Read more

A:Can't detect graphics card and SATA device simultaneously?

SO

After staring at my computer for an hour, and trying multiple random internet chats to no avail, I stared at my UEFI settings for a little bit longer and started messing around with some of the settings.

I found one particular setting that said: "PCIE1 Link Speed," which was set to "Automatic".
Since I didn't know what this meant, I didn't mess with it the first time I saw it; also, I figured since it was set to Automatic, it would automatically choose the best setting for me.
But, this was not the case. Because, as my desperation for high-quality game performance continued, I grew more daring and started changing around different settings to see what (if anything) would happen. So I changed the link speed from "Automatic" to "Gen1". There was also "Gen2" and "Gen3", but by luck of the draw, I chose "Gen1." When I saved and exited UEFI, everything worked beautifully just as it always has for the past 6 months.

I still don't know exactly what this means, or why it changed from the correct setting to "Automatic" but I'm just glad it works now. If anyone may have an explanation for why this works or what this means, I'm all ears, but I am currently able to game again at high quality, and that's all that matters.

Curiously, the other settings, "Gen2" and "Gen3" don't work; they don't even let the computer recognize the onboard graphics, and I had to reset my CMOS.

Thanks to... Read more

Read other 1 answers
RELEVANCY SCORE 61.2

I just installed windows 7 professional last night and when trying to personalize my theme, i realized that i couldn't change window color. It only gave me the contrast themes unlike in vista where i could choose the color and it would still look like vista. I'm not sure if that last sentence made much sense, but i hope you get the idea. I can still use the desktop backgrounds and sounds, but not the aero window colors.

When I go to device manager, the only graphics adaptor it shows is the standard VGA. When I had Vista I didn't have any problem. But now that I have Windows 7, the OS won't detect the graphics card. Is it not compatible with Windows 7? I saw another post with a fix for the 8400M GT, and was wondering if maybe there was hope for me.

Thanks in advance for any advice

A:Windows 7 won't detect GeForce 8400M GS graphics card

Google/goto NVIDIA drivers downloads on Nvidia website, select your graphics card and 32/64 bit. It should give you the latest driver to download. (195.62)

Read other 4 answers
RELEVANCY SCORE 61.2

Hello,
I have an alienware laptop with an nvidia 335m gt graphics card and it works perfectly for about a week. Then after an update, it can't be detected. This is the second time this has happened, the first time I just reformatted and it was back. Now after about the same amount of updates, it's not being detected again and the system reverts to one called "dell chipset family". The nvidia geforce program is still installed, however when I run it, it can't find the graphics card either. Please help lol I don't want to have to reformat every week because I'm not savvy enough to figure out what the problem is.

Thank you
Ricky

A:Cannot detect my nvidia 335m gt graphics card after update

You should not be installing this update.

Download the video drivers directly from Dell.

Uninstall any video drivers you have now.

Install the drivers you downloaded from Dell.

It will now be fixed.

Laptops are different, you need the driver from Dell and do not let windows update it.

Make sure windows is set to let you know about updates, but let you decide whether to install them, do not install any video drivers using windows update.

Read other 9 answers
RELEVANCY SCORE 61.2

Hello, I recently performed a clean install of Windows 7 x64 Ultimate onto my computer. While doing so, I had to unplug my graphics card and use the onboard video, otherwise I'd get an error about unexpected restarts.

After installing, Windows 7 doesn't detect the graphics card (the card works, but it doesn't show up under the device manager and I can't install nVidia drivers). If I use the BIOS to switch to onboard video, then that shows up on the device manager and works fine, but I use this PC for gaming so I'd prefer to use the video card.

Any help would be greatly appreciated .

Graphics Card - nVidia 9600 GT
Motherboard - ASUS M2NPV-VM
CPU - AMD 64 4800+
RAM - 3GB

A:Windows 7 Doesn't Detect nVidia Graphics Card

Which drivers did you try, these?
NVIDIA DRIVERS 196.21 WHQL
Also, did you try running windows updates afterwards, specifically "optional" updates?

Read other 9 answers
RELEVANCY SCORE 61.2

how to check my pcie slot working or not. When i inserted nvidia Gforce 9500gt it is not detecting my mother board (Asus M2N VM HDMI ) but graphics cards fan is working. then how can i identifies the slot is faulty or not. Is their any changes to be done in the bios. Please help me. My processor is AMD Phenom 9550 and 3Gb DDR2 ram is inserted.
 

A:PCI-E slot issue or any changes to be done in BIOS to detect my graphics card

You do need to go into BIOS and disable the onboard video card in order for one plugged into a PCI slot to work. That is most likely your problem.


There are diagnostic cards that you can plug in to test your motherboard such as the one at this site:

http://www.pc-diagnostics.com/pc_diagnostics_tools/flippost_isa_pci_bus.shtml

You also might call nearby computer stores to see if they have the equipment there and will run the diagnostic for you if you bring in your motherboard.
 

Read other 4 answers
RELEVANCY SCORE 60.4

Hello. I'm really new to this thread, and this just happened 18 hours prior to this post. I had to reboot my Windows XP (32 bit) After i downloaded NETFRAME 4.0. When i did, my pc hummed to life, but my monitor (A E19T6W) registered that my GTS 250 1024 MB Card was not reading. I check multipul times, looking at the graphics card as it runs. The fan works like it normaly does, but the display is not working. I am now running on my intergrated motherboard (Asus A8N-LA) Which is a Nvidia GeForce 6150 LE, and i do not know what to do. I tried removing the mobo battery for 5 minutes to reset the board, nothing. Ive tried to reinstall my drivers, That does not work. I Removed NETFRAME 4.0. That dose not even seam to help any. I do not hope it is a bad PCI slot, (had the motherboard for 3 years) but are there any suggestions available? Anything would be nice.

My specs are

System Manufacturer/Model Number: Compaq sr1901wm
OS: Windows XP 32 Bit
CPU: AMD X64 3600+ DUO
Motherboard: Asus A8N-LA
Memory: 1.75GB DDR
Graphics Card: Nvidia GTS 250 1024MB
Sound Card: Soundblaster 24bit
Monitor(s) Displays: Emachine E19T6w
Screen Resolution: 1440x900
Hard Drives: 1st Seagate 80GB
2ndSeagate160GB
PSU: BFG Tech 550 WATT

A:PCI dose not seam to detect my graphics card after NETFRAME 4.0 Update

Anyway you can test your card? I had a 9800gt die after I updated drivers for it and sent it back.

Read other 9 answers
RELEVANCY SCORE 60.4

Hi,
I have my new PC for a 4 months, everything worked perfect till one morning I turned it on, and the monitor (SAMSUNG) tried to detect the graphic card (ASUS R9 290) without any success and turned to sleep mode. The monitor works without problems with another PC or Laptop. I connected the VGA card to my tv LG, and it works without problems, after when I connected it back to my monitor, it works, but not stable, in the screen resolution properties it doesn't recognize the monitor, it's going in safe mode for any entering to game, installing some program or restarting of the computer. I tried to put my GTX 650 into that slot (there are 2 slots for graphic cards, and I tried both of them) instead of R9 290, and everything works without problems. So I decided to connect my GTX 650 that works perfect to x16 slot, and the R9 290 to x8 slot... connecting the monitor to GTX650, it detect also the R9 290 without any problems, but when I disconnect the monitor from the GTX650 and connect to R9 290, the monitor going to safe mode again. I tried all these connections with many different cables (all the cables are in working condition).
If somebody can help me, I will be grateful
Thanks
 

Read other answers
RELEVANCY SCORE 60.4

Here's the deal,
I purchased a HP Pavilion dv9540us Entertainment Notebook PC and upgraded to Windows 7, after I got a virus and let Microsoft Techs into my laptop remotely in an effort to remove the worm and they deleted some key OS Files. So, they were kind enough to give me Windows 7 Professional & install Office 2010, but failed to inform me that upgrading from Vista to Windows 7 would render my Nvidia graphics card useless. So, here I am trying to figure out what to do and where to get the correct Drivers to get my HDMI & Other ports working again. I tried talking to HP, but to them it's a matter of national security & if your not willing to "Grea$e the wheels" they're not willing to give up the "seceret." Although, They did tell me that I will need to download a chipset driver to my HP Pavilion dv9540us that is compatible with Windows 7 and then my Nvidia graphics card will be detectible by my Device manager. Then I would need to update my Nvidia Drivers, Reboot, and I should be up and running. Sounds good, but what is the HP Driver I need? Does anyone have a link or any better input?
Because, I am about ready to Smash this thing or hunt down some HP Support guy.

A:HP Pavilion 9540us Windows 7 OS, won't detect Nvidia Graphics Card

Welcome to seven forums american n need

Please fill in your specs by clicking this link Fill in your Computer specs

To know what your computer specs are do the following:
Click on the start
Type in System Information in the Search box
Copy and paste it here as well as your system specs in user cp.
System Info - See Your System Specs

Post back for further suggestions.

Read other 1 answers
RELEVANCY SCORE 60.4

Hi,I have in the past had a lot of problems with my Nvidia K2000M on my W530. Windows have kept disabling this due to "code 43" (Yellow triangle by the display driver).I have solved this by reinstalling Nvidia drivers, but when this happened every 3 days or so, I started to suspect something was wrong. And I believe I was right.... I tried to uninstall the driver (probably a mistake) before reinstalling the driver, but now the graphics card cannot be detected at all. When I try to install Nvidia drivers I get the following error message: "NVIDIA Installer cannot continue. This graphics driver could not find compatible graphics hardware". I also tried to disable optimus in BIOS, and enabled discrete graphics to try to force the computer to find the NVIDIA graphics card, but this obviously didnīt work. The computer then starts up with low graphcis and bad resolution. Under "Display adapters" in Device Manager there is no card detected at all (As the Intel integrated was disabled). So, is my NVIDIA graphics card defective, or is there som other solution to try to detect it? PS! I Also did a system update through Lenovos update center. Updated firmware in BIOS etc. This did not solve the problem..... Thanks,-ø 

Read other answers
RELEVANCY SCORE 60.4

I sent this laptop in for repair awhile ago and I just noticed that my computer doesn't recognize my dedicated NVIDIA 650m graphics card. It's not avalible in device manager or anything. It's as if it doesn't exist. I've started doing some work where I really need it and I'm stuck with the integrated graphics. I've ensured every drive is up to date, I've tried downloading drivers from NVIDIA's website, and I've tried downloading HP's posted Windows 8 drivers (there's nothing for WIndows 10). Nothing has worked so far.

Read other answers
RELEVANCY SCORE 60.4

Hey guys, I was hoping someone could help me with a problem my friend and I are having with his new Motherboard.

He's running an Asus M4N68T-M LE V2 and while the rest of the board works fine, it just won't see his graphics card in the PCI-E slot. We've tried various solutions and none have yet to yield any results.

We've tried disabling the onboard graphics through device manager etc. The board also doesn't let you turn off the onboard from BIOS, only allows you to set the priority of the display adapters, which is set to the PCI-E first. It just won't show his card in device manager.

His spec is: Asus M4N68T-M LE V2. AMD Phenom II x4 965 3.4Ghz Black Edition. 4GB (2x2GB) Mushkin 1333Mhz DDR3 Ram. Nvidia Geforce GTS450 GFX Card.

I've also tried using my ATI Radeon 5750HD Card and still shows no detection.

We've been trying this for over a day and we just can't figure it out. Help please

A:Asus M4N68T-M LE V2 won't detect external graphics card in PCI-E Slot

One problem that is common when installing these big video cards into Micro-ATX motherboards is that you may not get the card to fully seat properly because some obstruction is holding it up.

Carefully check the entire card/MB area to see if there is anything that may be propping the card up.
Remove the card and re-seat it looking and listening carefully to hear the rear tang on the video card "click" into place.

Read other 9 answers
RELEVANCY SCORE 60.4

Hi,I have in the past had a lot of problems with my Nvidia K2000M on my W530. Windows have kept disabling this due to "code 43" (Yellow triangle by the display driver).I have solved this by reinstalling Nvidia drivers, but when this happened every 3 days or so, I started to suspect something was wrong. And I believe I was right.... I tried to uninstall the driver (probably a mistake) before reinstalling the driver, but now the graphics card cannot be detected at all. When I try to install Nvidia drivers I get the following error message: "NVIDIA Installer cannot continue. This graphics driver could not find compatible graphics hardware". I also tried to disable optimus in BIOS, and enabled discrete graphics to try to force the computer to find the NVIDIA graphics card, but this obviously didnīt work. The computer then starts up with low graphcis and bad resolution. Under "Display adapters" in Device Manager there is no card detected at all (As the Intel integrated was disabled). So, is my NVIDIA graphics card defective, or is there som other solution to try to detect it? PS! I Also did a system update through Lenovos update center. Updated firmware in BIOS etc. This did not solve the problem..... Thanks,-ø  

Read other answers
RELEVANCY SCORE 55.6

I was trying to install a new video card to my father in laws HP. Its an HP Pavillion m7530n. It had a 7300 LE that I guess burned out and wasn't physically installed. I plugged in the vga cord to the standard plug on the back of the computer and started uninstalling the old nvidia drivers. Once uninstalled I restarted and put in the 8800 gts. I had all ready downloaded new drivers for the card so once back up and running (still plugged into the standard vga because no picture from 8800 gst) and installed new drivers. After that was done I rebooted again and no picture still from 8800 gts. I plugged it back into the onboard plug and the drivers had updated the onboard 6150 LE.

Tried a few things such as BIOS loading the video from PCI-E instead of PCI or Onboard and still no picture. Any other ideas? I tried posting on tomshardware (mistake again...) and only got sarcastic replies and a "what you should have done was". Could the card itself (a card from a friend who bought a new one) not be working, not compatible? Oh, I did put it a new power supply. 450 watt with 24a on the 12v. I used the direct 6 pin for plugging it in. COuld the monitor cord have something to do with it also? I am using a vga with an adapter on the vid card side only. Any advice on what to do next would be appreciated.
EDIT: Right now I plugged it back into the vga port and it has the 6150 LE installed again. If I plug it into the 8800 gts it is only a black screen and the only picture... Read more

Read other answers
RELEVANCY SCORE 55.2

HiMy computer can't detect the AMD graphic card,(It only detects the intel(R) HD Graphics card 5500)Eventhough I installed its driver and I didn't get any error messages.Help please !! 

A:My computer can't detect the AMD graphic card

Hi,  I assume you have installed Windows 10 64bit OS. Download this : AMD/Intel Switchable Graphics Driver (Windows 10 v1607) to your desktop. Next, Uninstall the drivers listed under Display Adapters in Device Manager. Next, right click the previously downloaded driver (.exe file), click Run as Administrator. Complete the installation procedure. Restart system. Check if the Device Manager for both Intel and AMD drivers listed.  Your HP laptop driver page.  Regards Visruth   

Read other 3 answers
RELEVANCY SCORE 55.2

I was downloading my latest video driver and in the middle of the installation it, I got the blue screen. Now my resolution only goes to 1280x1024 and when i go to the properties of my videos card, everything says unavailable. I'm really scared now.
 

A:Computer cannot detect video card

You could try using System Restore to go to a point before you tried to install the new driver.

Also, before installing a new graphics driver try first uninstalling the old one from Programs and Feature (Vista or W7) or Add or Remove Programs (XP).
 

Read other 1 answers
RELEVANCY SCORE 55.2

System Properties/Device Manager/Display Adapters/Nvidia GForce 9500 GT/Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)

I have been using the above video card successfully since 2009. I booted this box a couple of days ago to a different video resolution and a partially covered monitor screen.

I'm not aware of any changes that have been made to any settings or any added or deleted hardware changes.

I'm using XP Home, SP3, P4, 3.20MHz, 2GB ram. Anh help would be appreciated

A:Computer will not detect video card

From Explanation of error codes generated by Device Manager in Windows XP Professional

Quote:




Make sure that Device Manager is open, and that the device that has the problem is selected. You can perform some recommended resolutions through Device Manager.
Right-click My Computer, and then click Properties.
Select the Hardware tab, and then click Device Manager.
Double-click the device type that has the problem. For example, if you have problems with your modem, double-click Modems to see the devices in that category.

A list of devices appears. If a device has problems, the device has a red exclamation point next to it. If a device is unknown (usually because of missing drivers), the device has a yellow question mark next to it.
Right-click the device that has the problem, and then click Properties. This opens the device Properties dialog box. You can see the error code in the Device status area of this dialog box.
Use the Troubleshooting Wizard, if it is available, to help you diagnose and resolve your problem.
On the device Properties dialog box, click the General tab.
Click Troubleshoot to start the Troubleshooting Wizard. The wizard asks you some simple questions and provides a solution to your problem based on the answers that you provide. If the Troubleshooting Wizard is not available, go to step 3.
Follow the resolution steps provided by the wizard to resolve the problem.
Check the Device status area of the device Properties dialog bo... Read more

Read other 2 answers
RELEVANCY SCORE 55.2

Hey everyone, I'm in dire need of some help with my PC. The computer turns on fine, and boots up (can hear the windows start up tune) but I can't see anything on the monitor. Here's the details:

I was playing a computer game on friday, and during that it crashed. I have no idea if this is when things started or not, but I restarted and it was fine.

On sunday I had another crash, only the screen flickered once or twice and there were green pixel lines going from top to bottom of the monitor , about 2 inches apart in a perfect pattern. When I restarted, there were no graphics on the monitor. The light was flashing indicating it was on power saving mode.

I took the computer apart, unplugged everything, and put it all back together, and for whatever reason it worked fine for about 6 hours.

The next day I turned the computer on, and it loaded fine, but shortly after there was the return of the green pixel lines, with the added addition of the top left corner of the screen being filled with green pixelated triangles in a perfect pattern. These were flickering furiosly.

I tried restarting my computer, and again I got no graphics posted to the monitor. However the computer booted up fine, and I heard the start up tune, and 5 minutes later I shut it down by pressing the "Power Off" button on my keyboard.

I tried another monitor and again, got nothing. I then tried taking the computer apart and putting it back together again, only this time it didn'... Read more

A:Graphics card doesn't post any graphics to my monitor, computer boots up fine

Its usually just the graphics cards, they do fail especially if they overheat - then video card fan not speeding up might have been the problem - most are dynamic and should actually speed up under load. Depending on the manufacturer of your 8800GTX you might be able to get it replaced under warranty if they have a 3 year or greater warranty.
 

Read other 1 answers
RELEVANCY SCORE 54.4

Anyone know whats causing it? I tried both PCI slots it didn't work in either of them. Also made sure they were inserted correctly.Tried googling but to no avail.

AMD Athalon 64 x2 3.2 ghz dual core processer
2x nVidia 8600 GT Graphics Cards
2 gigs of ram

Thanks!
 

A:Computer won't detect brand new PCI sound card.

Read other 11 answers
RELEVANCY SCORE 54

For the usb detection error it is an adapter that plugs my micro sd card into the usb port so i can move music onto it to put it in my phone, i had to reformat the sd card while it was in my phone so my phone could use it and now i cannot get it detected on my computer no matter how i connect it (usb adapter, SD card adapter, micro sd port ) and i have yet been able to find a solution to this problem. the device status is "This device could not start. (code 10)"

The issue with my wifi card is still unknown to me as well, i have my wifi card plugged into my desktop and it says i have nothing plugged in in the bottom righthand corner where the internet connection would show. When i go to device manager it has the yellow warning symbol next to it and the device status is as follows "Your computer's systems firmware does not include enough information to properly configure and use this device. to use this device, contact your computer manufacturer to obtain a firmware or bios update. (code 35)"
this wifi card started to perform slowly and made my download rate drop from 1.3MB/s to under 100Kb/sec randomly. I have a Broadcom 802.11g network adapter with hardware id pci\VEN_14E4&DEV_431&SUBSYS_044914E4&REV_02 and i had the driver tuner from broadcom which needs internet to work... seems counter intuitive to me but whatever.
I ran into this issue when I switched my wifi cards to a different one and the new one didnt download the drivers correc... Read more

A:USB detection error and computer cannot detect my wifi card

Hi Welcome to Seven Forums .. Your second issue Code 35 could be a BIOS Issue ..

Have a look in System Information there you should find which Version you are using ...

Then check on your Motherboards Website .. To see what the latest Version is ..
Personally i do not recommend Updating the BIOS ..
As for Code 10 that is a tricky one ...

Read the Link below ...
How To Fix Error Code 10 (This device cannot start)

Read other 1 answers
RELEVANCY SCORE 49.6

I have a BenQ computer and AMD Radeon HD 6800 graphics card. When I install my the driver for my graphics card it detects my monitor as non-pnp mobile, and I can only get 640x480 resolution. If I uninstall my graphics card and restart, I get a generic VGA graphics card and the computer will give me a higher resolution, but it is not the native resolution.

I don't know what to do. Do I need to get a new graphics card?
 

Read other answers
RELEVANCY SCORE 49.2

Because I'm not at the computer at the moment of typing, all I can really say is this.

I want to use the PC for gaming, it's a new computer, about a month old with little to no use.

500 gb HDD
Nividia 7100 - 128 mb RAM
4 gb Cpu RAM
HP Slimline pc

I'm trying to play games such as Call of duty and World of Warcraft with decent quality. I was wondering if an slimline pc could have an extra gfx card added into it or replace the 7100 with another card. I don't know if it has an extra slot for the card. I think it may have 1 slot open.
 

A:Can my computer use 2 graphics card?

Probably not. I believe that model is a small form factor PC, which would restrict you from installing pretty much any powerful video card. And seeing as you'd have trouble installing one card, installing 2 cards in SLI or Crossfire is really out of the question. Unfortunately, that PC is not too upgradeable
 

Read other 1 answers
RELEVANCY SCORE 49.2

Hi and thanks for reading my post.

I have an old computer, bought about 5 years ago, with a Pentium 4 2.8GHz processor, 2G of RAM and an ATI Radeon 9600 series video card. Its running WIndows XP SP3 and I recently had it re-installed and all drivers updated etc. When I had this work done I also had a Hauppage TV card installed but it has never really worked properly. Recently it has also started randomly freezing, so completely I have to press the power button to re-start - yet it runs fine at other times. IT is not associated with any particular application - sometimes it does this when booting up - but it often happens if I am streaming video eg BBC i-player. I used to play MMORPG on the machine but now I have a new PC for that - its still installed however.

I have run malware programs, have AVAST installed and have cleaned and defragged the disc to no avail.

I am wondering if a new video card would solve my problems, but have no idea how to choose one.

Can anyone offer suggestions please?
 

A:New Graphics card for old computer?

Read other 7 answers
RELEVANCY SCORE 49.2

Hello fellow forum users!

In recent times, my computer has started bugging out (again) whenever I play just about any game. After a while, the screen will flash, then a screen with (usually a certain color) stripes going down it will appear, and my computer will freeze.

This is a picture of the stripe things:

http://i.imgur.com/Ma6g1.jpg

Also, here are my computer's specs:
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz, Intel64 Family 6 Model 26 Stepping 5
Processor Count: 8
RAM: 6134 Mb
Graphics Card: ATI Radeon HD 5900 Series (5970 I believe), 1024 Mb
Hard Drives: C: Total - 610375 MB, Free - 378665 MB;
Motherboard: Alienware, 0H869M
I'm speculating it has something to do with a faulty or corrupted video card, but I wanted some other opinions before taking action. If anyone knows what this is all about, that'd be great!

Thanks for your time!
-Baeo
 

A:Computer's Graphics Card done for?

Read other 6 answers
RELEVANCY SCORE 49.2

ok u guys please help me.. i got a computer like 3 year ago. and i have played lots of games on it.. an now that i try to play halo.. no texture no nothing.. it lags an crap. i dont know.. so im asking new graphics card or just a new computer?????
Machine name: VALUED-CB7D4C82
Operating System: Windows XP Home Edition (5.1, Build 2600) (2600.xpclnt_qfe.010827-1803)
Language: English (Regional Setting: English)
System Manufacturer: Sony Corporation
System Model: PCV-RX860(UC)
BIOS: Award Medallion BIOS v6.0
Processor: Intel(R) Pentium(R) 4 CPU 2.40GHz, ~2.4GHz
Memory: 480MB RAM
Page File: 134MB used, 992MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
---------------
Display Devices
---------------
Card name: SiS 650_651_740
Manufacturer: SiS
Chip type: SiS 651 Rev 00
DAC type: Internal
Device Key: Enum\PCI\VEN_1039&DEV_6325&SUBSYS_811C104D&REV_00
Display Memory: 32.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: SONY SDM-S71
Monitor Max Res: 1280,1024
 

A:Either new computer or new graphics card?

I love playing halo

I love playing halo, and i have a worse computer than that. Make sure you have all the visuals set on low. You don't have a ton of ram, I would upgrade to atleast 512MB. I can play halo on low visuals on a 733MHz processor so that looks good. I would get a new graphics card. You have a 32MB integrated card, and thats terrible. I have a 64MB integrated graphics card, and it runs barely. I would get a new card.
 

Read other 17 answers
RELEVANCY SCORE 49.2

This is all it shows in Display.

A:Does my computer have a graphics card?

Well it does have an on board one, what does it say in Device manager?

Read other 4 answers
RELEVANCY SCORE 49.2

Hi,I am having the following issue: Every time I try playing a game, my laptop gets overheated and after 10 minutes of normal gameplay, the game's framerate goes down to 10-12 fps. Even when I try using smaller resolution or lower down the other video settings, it is the same. I think the main issue is that the computer has integrated graphics card and it is using it instead of my amd graphics card. So, the game that I tried is Counter-Strike Global Offensive. I am using Windows 10 Pro 64bit. My laptop is HP Probook 450 G1 E9Y25EA#AKS.Here are the specs:Processor:      Intel(R) Core(TM) i7-4702MQ CPU @ 2.20GHz, 2201 Mhz, 4 Core(s), 8 Logical Processor(s)Installed Physical Memory (RAM):      8.00 GB (DDR3, 1600Mhz)Screen size:      15.6 inchResolution:      1366x768GPU Type:      Intel HD Graphics 4600 (Integrated) + AMD Radeon HD 8750M (2GB DDR3) I tried the complete AMD uninstall. Then installing the latest drivers but no difference. Then I tried uninstalling them and installing the drivers from hp's servers - no difference. So I am a bit confused now and I don't know what to do. Before a year, I was using Windows 8 and I played all the games I wanted without the annoying lag. I think that probably there is some issue with the drivers for windows 10 or something because my pc is not that bad to run games like CS on 10 fps... Thank you for your tim... Read more

Read other answers
RELEVANCY SCORE 49.2

i am deciding on getting one of these cards nvidia gtx 260 or a ati hd 4870 or an nvidia 9800gtx+ so im wondering will any of these fit my hp m8400f computer and which card also do you think will perform better. I am also wondering nvidia supports physics does ati support physics as well.
 

A:Graphics Card that Will Fit My Computer

Any of those cards will fit in your computer. the 260 and 4870 are probably the better choice as the 9800 is getting a bit dated, although it can still pretty much run any game out there and can be found for less than the other two. I'm not gonna get into an ATI vs. nVidia thing. You'd be better served looking at some of the articles here that do direct comparisons between the two cards.
 

Read other 79 answers
RELEVANCY SCORE 49.2

Hello all, first time poster with a quick question.

I have a 10 year old dell computer that im looking to upgrade (over the years ive bought more ram and graphics cards to keep it afloat) But since money is tight i cant afford a new off the line PC.

Im looking to buy this computer here http://www.currys.co.uk/gbuk/acer-ax3950-refurbished-desktop-pc-09734853-pdt.html

as it says, the graphics card is an integrated intel HD up to 1024mb shared memory (to be frank, i dont know what this means, nor how good it is)

My current graphics card is an ATI Radeon 2400 AGP http://www.amd.com/us/products/desk.../hd-2400/Pages/ati-radeon-hd-2400-series.aspx

Now the question is, can i take my graphics card out and plug it into the new PC im looking to buy? (I do a lot of gaming and im not a stickler for looking beautiful, so long as it performs well) If you need anymore information i will oblige.

Please and Thank yous for any help
 

A:Old graphics card, new computer

No,sorry.
That computer uses a PCI express X16 slot for a graphics card.
Although the integrated onboard video should be good for video
playback,it isn't designed for gaming.
AGP is getting pretty old now.
You might check on ebay.
With a little patience you could probably find an 8800gt on there cheap.
 

Read other 2 answers