Over 1 million tech questions and answers.

Solved: unable to configure router after factory reset

Q: Solved: unable to configure router after factory reset

Hi all my friend,
I have a (Air Access) - ZG-5000-11g Wireless Outdoor Bridge , Ap Router, It has hanging problem, so I make it factory default. but now I have unable to configure it. so plz some one help me to find out default ip address.. plz help me…

RELEVANCY SCORE 200
Preferred Solution: Solved: unable to configure router after factory reset

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solved: unable to configure router after factory reset

Read other 7 answers
RELEVANCY SCORE 77.2

Hi. Last night my router automatically reset itself to the factory settings. Is it still secure? How can i create a unique password like i did upon initial set up. Right now it is just Cisco + (last 5 digits of the serial number) and the password is well "password". I figure anyone with any knowledge who was looking for a available wireless network to use could hack into it, or worse yet do something illegal in which case i guess the IP address would show as coming from my home.

It is a linksys E3000

How can i make it secure again?

Thank you
 

A:Solved: My router automaticallyy reset itself to the factory settings. Is it still se

Read other 6 answers
RELEVANCY SCORE 75.6

Hi

My friend asked me if I could set up his Router so that he could connect wirelessly. No problem, I said.

I ran IPCONFIG /ALL and discovered that the Default Gateway was 192.168.2.1

Then I hit a brick wall.

No default passwords seemed to work, so I assumed one of his friends had set an Administrator Password.

No problem, I said.

I called Orange (his ISP) and they gave me the Broadband Username and Password.

I then RESET the Router.

Sure enough, there was now no Internet Connection which leads me to believe that the Router had been reset.

BUT!! I STILL cannot login using admin which is what the default password should be according to

http://freeola.com/support/dns-hitachi.html

Now, 2 thoughts are in my head (The Router was NOT supplied by his ISP btw, nor can he remember which ISP, if any, it was originally supplied by)

1. The default password is different than the default found on that link
2. An Administrator Password change affected earlier in its life has somehow become immune to a Reset using a paperclip!

HELP! lol

I have had to loan him my Netgear DG834G btw (which, btw, set up to the Internet with no problems whatsoever when given the BB UN / PW)
 

A:Solved: Cannot login to Hitachi A261-431245R Router even after factory Reset!

The Hatachi setup guide I found shows default password after reset is 0000.
http://freeola.com/support/connections-adsl-hitachi.html
 

Read other 3 answers
RELEVANCY SCORE 68.8

I have an Asus wireless WL-520GU that I have a wired connection to my PC. Why, because I am using the wireless only to allow access to my webradio.

Problem is the web radio connects 50% of time. Other times to connect I need to manually configure on webradio to connect to connect to wireless. It works sometimes other times not. I haven't been be to get to point of securing the SSID. So probalby someone is stealing my bandwith.

Now to explain my setup, my modem is connected to my Linksys 2102 adapter (used for VOIP) which to connected to the Lan port on the router.

I can surf the web on the PC, but trying to establish a connection, the PC does not recognize a wireless device. I cannot even access the Asus web interface (192.168.1.1)

My default gateway is 192.168.0.1 that of the Linksys adapter,

How to enable SSID so I can lock it and I can access the wireless problem-free from the web radio (Aluratek) ?
 

A:Unable to configure wireless router

Read other 16 answers
RELEVANCY SCORE 68.4

Hi guys
my boss gave me two routers a while back and when i got home i tried to set them up but they still have the old settings from the internet at work,so how do i reset them to factory settings?they are both netgear dgn2000.

so i also have five laptops and xerox work centre 7020 printer that i want to connect to the network but i can only print from one pc.

i have the following to set up the network: 25 port netgear switch,two wireless netgear routers,cat5e cables,xerox workcentre 7020 printer and five laptops and i want all of them to communicate on ethernet network

i would very much appreciate any expert advice,i am not a geek

cheers
cheers
 

A:how to reset router to factory settings

Procedure starts on page 36.

http://www.downloads.netgear.com/files/GDC/DGN2000/DGN2000_SM_20May08.pdf

Suggest saving the PDF for future reference.
 

Read other 1 answers
RELEVANCY SCORE 68

hi,
I have a Packard Bell imedia 1628 pc running Windows xp. My pc hasn't been running for quite some time so I cleaned all the dust out and rebooted to see a login screen. I couldn't remember my password.
Is there a way to get into the account. I've tried the hold f8 method and login as admin through ctrl + alt + del but neither worked please help

-Ben
 

A:unable to factory reset

We don't provide help here with a password-protected computer because we have no way to confirm ownership or intent for accessing it.

You really should move on to a newer and faster computer with Windows 7 or Windows 10.

---------------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 68

Hi all, FInally, I got myself a new T series notebook.  I'm looking to get rid of my X1 Carbon (Gen 2).  A few months back, I did a factory reset from Windows 10 and it went smoothly, but when I attempted it today again, I kept getting the error "there was a problem resetting your pc".  Has anyone ever got this and have any idea why? Are there any other alternative ways to have Windows reconfigured to factory state and have all of the files destroyed and deleted? I'm looking sell the machine off, would love to get all my data off for good with a fresh copy of windows.Thanks!

Read other answers
RELEVANCY SCORE 68

This is a friend's laptop (Sony vaio), windows 7 home premium edition. Apparently, after it developed some issues, a colleague reformatted the drive, and could not reinstall the OS.

I have tried the following:

- Tried to use the two recovery dvds created when the computer was purchased. It does not work. The screen is blank. In safe mode, it goes tries to the recovery mode, but then nothing happens.

- Tried to use the .iso image from Microsoft and burnt it to a dvd. The screen asks for the language and the country etc., then after it says install windows, the screen remains at setting up. Nothing happens.

-Tried to use my windows 7 "update" dvd to start the laptop. Same result as for the .iso image.

Grateful for any help. The laptop has a separate "one touch web access without booting up" key, and that brings the internet up with a "slapshot" browser.
 

A:Unable to go to factory reset

I'd first suspect a hard drive or memory defect. If the BIOS has diagnostics run them.
 

Read other 3 answers
RELEVANCY SCORE 68

Have an Inspiron 2305 desktop with Windows 7.
Installed Windows 8 Consumer Preview and it caused a bunch of problems, so I decided to revert.
There's no way to simply roll back to Windows 7, unfortunately, so I'm OK with just saving all my files and doing a factory reset.
[It's been a year since I bought it, so I actually like doing that once every year]
However, following the directions from the manual,  booting up and pressing F8 doesn't do anything.
It's like it just doesn't recognize the F8 key.  It does recognize other Funtion keys: F2 (setup) and F12 (advanced).
Not sure how I can factory reset it.  I don't have any system recovery disks.  I can't start Dell Datasafe (doesn't work right for some reason - probably because it's all running on Windows 8).

Any suggestions?

A:Unable to use F8 to do the Factory Reset

sreeve29,
Thank you for using the Dell Community Forum.
You can fill out the online form below to request backup disk. I am not familiar with Windows 8 since it is a beta version. It more than likely destroyed the restore partition. You will need to get the disk and then format/reinstall Windows.
Request Backup Disk for US Customers

Read other 4 answers
RELEVANCY SCORE 67.6

I have a Netgear DGN2200v4 router.

Yesterday I had random problems with the Internet connection - not unknown here. My usual practice is to drop the ISP connection and then login again, but that did not work. So switched the router off, waited, then powered it on again. Usually that fixes the problem, but not this time. Repeated that a few times - still no luck.

Eventually I discovered that the router had reset itself to factory defaults! I reloaded configuration details from a backup file and OK after that. BUT....why would it apparently reset itself like that?
 

A:Unexpected Factory Reset on Netgear Router

Nemo2000 said:


BUT....why would it apparently reset itself like that?Click to expand...

Maybe an unusual reaction to a small power surge?

Maybe trying to alert you that it is beginning to fail and you may want to start researching/shopping for your next router?
 

Read other 2 answers
RELEVANCY SCORE 67.6

Hello,

I have an Arris Tg862 for my home network, with a single computer attached to it. I wish to reset my wifi's security key for multiple reasons, but I cannot access the router options at 192.168.0.1 because I do not remember the password. After looking online several times, I performed a factory reset on the router, but it seems to no avail, as the wifi still works on my phone and I still cannot use the default password and user on the router. (The factory reset entails holding the reset button pinhole down for ten seconds or so.)

I just want to be able to reset the router to factory settings to access it, but it seems that the reset doesn't work.

My ISP is Time Warner Cable and they are the ones who provided the router.
 

A:Cannot access router. Factory reset not working.

Have you called your ISP and asked for help in doing it?

---------------------------------------------------------------
 

Read other 4 answers
RELEVANCY SCORE 67.2

hi i have a ideapad 310 im trying to reset back to factory but it wont let me any ideas please 
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

Read other answers
RELEVANCY SCORE 67.2

I have a newer Samsung laptop with windows 8 along with a system recovery cd, but no
matter what I do I am unable to restore it to factory. I am able to perform the reset, but
all of my original settings are still there. I would appreciate any help. I'm pretty sure I
have some sort of virus.

Thanks,

Karen

A:Unable to reset windows 8 to factory

if that is the case your system is using a customrefresh.wim and not the needed istall.wim

right click > command prompt > run as admin then type

reagentc /info

post the results by using the snipping tool

Read other 5 answers
RELEVANCY SCORE 67.2

I have a Pavilio g6 which has got a win7 original os that I updated to win 10. recently I turned off my machine while was booting and after that it gave me a blue screen error that said: bad cinfig system info. somehow I managed to install a win 8.1 pro but first when I enter my product number it doesn/t activate and I can't reset factory my device back to its original win 7. I guess it can't find the primary drive storing the source files and it gives me an other message that the main drive has already 4 partitions and can't have more. I used to be able to reset factory my device at any time but now it asks for a sorce drive and it just takes back to win 8.1. how can I reset my device?

Read other answers
RELEVANCY SCORE 67.2

Hi, i recently purchased a d-link router, so i could have a wireless router. Ive got it up and running, but having some problems with letting others to connect! I know what the problem is, i just dont know how to solve it!
The router is currently connected in port 1, which makes the ip adress messed up, and i can only have one other pc connect to the network, and that computer has to type in my DNS adress, because the router will not accept ip adresses automaticly. However this can be sold if i connect the router in the Wan port. But when i do this i loose my connection, it just get limited connection. and to fix this i have to go into the admin panel, which i cant connect to! Have tried by wireless and with cable, with no luck.

BUT!

If i reset my router to factory settings, this will be solved. But the router wont reset, ive tried reseting it for 30 secs with power on, but it just restarts and the settings are the same, have also tried this with power off!

What am i doing wrong?

Please help
 

A:Unable to factory reset my d-link 615

The router is defective, take it back.
 

Read other 1 answers
RELEVANCY SCORE 67.2

I have a Netgear DGN 2200 Router-modem that has a broken reset button. I confirmed this by opening the device itself to find the button actually missing...(I know there is supposed to be a button there because I used to have the same model at my home) There's no way I can solder anything to fix the issue internally. Unfortunately, some of my router configurations were changed by my room mate and now we are unable to log in (he accidentally changed the username and/or password) and configure the settings of my network on my computer. Is there a way I can reset the router console settings? I have everything to my disposal such as the router-modem itself and the computer that is connected to the device with an ethernet cable. My room mate tried to block certain keywords and websites that I use daily such as Google and reddit as a prank which is why I'm not able to Google this problem. You would think that if you had an ethernet cable hooked from the router to the computer you would be able to access it...
 

A:Restoring router to factory settings without reset button

Read other 7 answers
RELEVANCY SCORE 66.8

i'm trying to do a factory reset because i likely have viruses that haven't been detected by my antivirus software. i read in the manual that with the older laptops you have to hold "0" and then press the power button while it's loading, but when i do that instead of giving me the long beep and warnings i'm taken to the boot manager. am i doing something wrong? laptop model number is Satellite C655-s5061
edit: i have also tried hitting f8 at startup and selecting repair computer, which eventually takes me to system recovery options, but the toshiba recovery wizard does not show up as an option. iv been looking at other forums and someone said that "It won't go to the Toshiba Recovery menu if the Toshiba Recovery partition is deleted or corrupted."  is that likely the case here?
fyi, i am able to navigate the desktop so the pc is running, alebit slowly

A:unable to do factory reset on toshiba laptop

If the Partition for Recovery is missing or damaged you may have to order recovery disc`s  from Toshiba { At a Cost }.
 
You can see if the Recovery Partiton is actually there ?
Control Panel /   Administrative Tools / ComputerManagement  / Disc Management 
If it is , it shoud be about 10 - 20 Gig in size and named Recovery.
 
As you have already tried from F8 to enter recovery , you may also try from Start / Programs / Toshiba Folder / Recovery / if its listed.
 
If all else Fails , provided you have a valid Product Key on laptop , you coould download Operating System ISO and burn to disc and Install.
This will not have Drivers or Toshiba Apps , you will have to get them later , if you wish to have them. 

Read other 0 answers
RELEVANCY SCORE 66.8

Using f8, doesn't give me ability to reset.  The partitions are there including recovery but Dell tools do not appear
Did use the recovery disk but problem never went away.
Problem:
After what appeared as a virus intrusion was unable to connect to email.  Ran recovery hoping that that would solve problem but it did not.  Tried thunderbird, others and no luck.  Want to factory reset but am given no opportunity.
Bought at best but but partions are still there so????

Read other answers
RELEVANCY SCORE 66.8

I have a Windows 7 Acer Aspire 5734Z computer 3 GB RAM, 320 GB hard disk. Want to reset to factory settings, but unable to as I am unable to click and reset only to a a very recent level. The computer is REALLY REALLY slow and takes ages to load. Any tips to reset to factory settings or any other tip to make it work like new is much appreciated. Thank you very much.
 

A:Unable to reset Windows7 to factory settings

Read other 6 answers
RELEVANCY SCORE 66.8

 
I used f11 hey mines saying it's repairing but just clicking it's been doing it for abt 30 min ,not working for me, 

A:Unable to Factory reset HP 2000 Notebook PC

Raines Hello;Allow me to welcome you to the HP forums! If you're hearing a "clicking" sound and not seeing any progress in the reset, my guess is that you hard drive has died -- as it will produce that sound when the seek process fails repeatedly. Please follow the instructions in this link to test the drive: http://support.hp.com/us-en/document/c00439024If that is not possible, as is the case where the BIOS is too old to offer that function, then do the following:1) When rebooting the PC, keep pressing F2 repeatedly. That should eventually bring up a Diagnostics menu.2) Select the option to test the hard drive.If the diagnostics fail, your drive has failed and will need to be replaced.Please post back with the results.Good Luck

Read other 1 answers
RELEVANCY SCORE 66.8

I have a same problem,is there someway you can reset it without a recovery disc?
 

A:Unable to reset Windows7 to factory settings

I have moved to a new thread

Make and model of pc
What windows version are you runnin
 

Read other 1 answers
RELEVANCY SCORE 66.8

My Laptop was very slow and very often it was showing BSOD. Using recovery disk, I reset the laptop and reinstalled. I am having Win 7 Home Premium 64 bit OS.  However after installation the laptop restarted and then it is showing Starting Windows and then the screen goes blank. No idea how to get this box up and running. Any help will be much appreciated. I have the recovery disk and tried it twice but its still the smae thing always. I tried to install fresh Win 7 ISO using USB but after loading the files the Win 7 welcome screen comes and then the configuration window starts and then immediately the laptop restarts.

Read other answers
RELEVANCY SCORE 66.8

Product: HP 2000  Notebook PCOS: Windows 7 Ultimate 64 Bit Hi, I have backed up my entire notebook and ready to factory reset but I am unable to achieve this.  I have not been able to find the HP recovery manager on the computer nor a download available for it. I have held the F8 key during reboot but I only get a system restore point option, not a factory settings option.  I unfortunately do not have any CD of Windows 7 ultimate Not sure where to proceed and help is appreciated, Thanks!











Solved!
View Solution.

A:Unable to Factory reset HP 2000 Notebook PC

Hi, If the Recovery Partition is still intact, you may be able to launch this by shutting down the notebook, then tapping away at f11 as soon as you start the notebook. Regards, DP-K

Read other 9 answers
RELEVANCY SCORE 66

I have recently attempted to reset my laptop to factory and i get this issue
Computer specs:
Asus VivoBook S550CM 8gb Ram

1.
2.

HELP, Need more info? please post on thread

A:Unable to reset to factory - ASUS Partition ( Built In )

Take a look at this post: link







Originally Posted by le011


easy way to solv this problem

hi all
i had same problem after update to win 8.1.
after reading this post (which was very usful),i went to asus web site and find solution for this:
pogram cald "Backtracker" fron Asus that will let you to acssec and backup and restor from the recovery partition
even after update to win 8.1. heare is the link to the program:

ASUSTeK Computer Inc. -Support-

i used it to recover my computer and worked perfect and very simpel to use.

i hoop it will help all

Read other 2 answers
RELEVANCY SCORE 66

Hi, I started to reinstall my laptop to factory default settings. I realised I had lost recovery disk 5 when asked to insert. I only have 4/5 disks. I can't complete the recovery and my computer wont boot. What must I do? Yuki

Read other answers
RELEVANCY SCORE 66

Hi,

Hopefully this is the right place for my problem, if not please accept my apologies.

I have a device that uses the WIMBoot method - https://technet.microsoft.com/en-GB/.../dn594399.aspx
the device has four partitions, a 300MB System partition, 128MB MSR partions, OS Partition and a Recovery Partition.

I have created a DOS command batch program that runs from a WinPE USB, that takes an image of the device and saves it to the USB (no problems with that)

When I then use the Recovery option of my DOS command batch program it does the following;


Code:
REM --- Constants used to calculate free space ---
REM Overhead Ratio: assume 6 MB overhead per 1000 MB size
set /a NTFS_OVERHEAD_RATIO=500/497
REM Per-Partition Overhead: 5 MB per partition
set /a NTFS_OVERHEAD_BASE=5

REM Megabytes-to-Millions Ratio:
REM This ratio converts values from megabytes to millions of bytes, approximately.
set /a mega_million_ratio=205/215

REM --------- Constants -------------

REM Drive letter of the Windows partition.
set user_volume=C:

REM Drive letter that contains \Images\install.wim. Example: E:
set wimfile_path=%directory%

REM Drive letter that contains \Images\winre.wim. Example: E:
set winre_wim_path=%directory%

for %%A in (%wimfile_path%\install.wim) do (
set install_wim_file_bytes=%%~zA
echo install.wim is [%install_wim_file_bytes%] bytes.
)
set /a install_wim_file_MB=%install_wim_file_bytes:~0,-6%+0
set /a install_wim_file_MB=%install_wim_file_MB%*205/215

for %%A in (%winr... Read more

Read other answers
RELEVANCY SCORE 66

Hi --- I have a similar issue on my Windows 8. My Acer laptop drive crashed. I got a new one. Got recovery bootable USB from ACER. In fact got two. When I ran thru the boot process from the USB, everything appeared to be OK. However, after the program tried to unpack the install.wim file, an error message flashed across the screen saying "The Specified image file did not contain a resource." USB program then finished and said to remove USB and reboot. I did and then after it restarted with a recovery screen, I got an error "Restore Failed: Cannot find image path M:\RecoveryImage\Install.wim " PC is out of warranty and ACER third part tech support wants $100 at minimum with no guarantee. Also, I had tried reloading an image I made last year but recovery CD won't read the image on my external drive. But it does see old windows 7 images. Thanks for any help. I've put hours into this and no luck with windows but it does boot up on Ubuntu, btw.
 

A:unable to factory reset The Specified image file did not contain a resource.

Read other 6 answers
RELEVANCY SCORE 66

I am trying to Format a Toshiba satellite laptop, it is 12 months old and has Windows 8.1 on it.
I press the the "ZERO" key on start up, but when I get to the return to factory setting part it tries for a couple of seconds and then comes up with

"Unable to reset your PC, The required drive partition is missing"

And when I try to Refresh the drive after going to the recovery section then it says
""The drive where Windows is installed is locked, unlock the drive and try again"

Any Help please

A:Unable to reset my Satellite notebook to factory settings

> "Unable to reset your PC, The required drive partition is missing"
Obviously the recovery partition containing all the recovery files isn?t available anymore? probably it has been deleted or modified in the past?
One question:
Can you reset the OS back to factory settings using this method?

1) In the settings charm, click "Change PC settings".
2) Click "Update & recovery" under PC settings.
3) Click "Recovery" tab.
4) Click "Get started" under "Remove everything" and reinstall Windows.
5) Follow the on-screen instructions to finish the recovery.

In case this isn?t possible anymore, you will need to perform the recovery procedure using the Recovery medium (USB flash recovery stick or DVD disk)

Did you create such medium in the past?

Read other 5 answers
RELEVANCY SCORE 61.2

i am unable to reset my router back to default username/password setting.ive been able to reset it in the past, but i cant remember what i did.

i have held the reset button down for 90 secs. then i unplugged the router while still holding down the reset button for an additional 90 secs. and finally plugged the power back in again still holding the reset button for an additional 90 secs.

ive tried switching between different web browser. default gateway is 198.162.1.1

tried using cmd prompt. used ipconfig /release. ipconfig /renew. just for the heck of it.

ive also read that this same model and version is giving alot of people trouble as far as resetting it goes.

honestly, im not sure what firmware i have installed. im not sure how to check it... if that may be the issue.

while trying to login to router via firefox, i get the security level 15 message

cant remember my username/password
 

A:Unable to reset linksys BEFW11S4 ver 4 router

Sounds like your router needs a hard reset, the following has helped me in some cases, but be aware, if these procedures don't work, than your router has gone bye bye, it's junk.

To reset your router to factory defaults, use the following procedure:

1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you ... Read more

Read other 1 answers
RELEVANCY SCORE 60.4

Okay, I just successfully installed dd-wrt on my wireless FON router.

I have no clue where to go from there. The wireless signal can be seen by my laptop, and i can connect to it, but if i try to open a web browser, i get a page cannot be displayed. The laptop gets assigned an IP address od: 192.168.1.114, so it is assigning me an IP, i'm just not sure if it is the correct one. read on...

I am assuming this has to do with configuring the wireless router. My wireless FON router is connected to hub or a router (i am not sure, it came with my xbox and it says "Gamester" on it, with 5 ports). The Gamester is connected to my Speedstream 5667 dsl modem.

I am kind of new to this forum, so if you need more info, just ask. Anyone know where I can start to solve this problem?
I can also access the router by typing in 192.168.1.1 into my browser. I think i read somewhere that I need to find the IP of my router? or wireless router? I have no clue
 

A:Solved: How to configure dd-wrt firmware on router??

Read other 11 answers
RELEVANCY SCORE 60

if I use my backup disks will this this put my laptop back to factory spec including the registry .

ASUS laptop win 7
 

A:Solved: factory reset

Read other 6 answers
RELEVANCY SCORE 60

Here is my Desktop Specs:

Windows XP Svc Pack 3
Mainboard : Asus P5KPL-CM
Network Card : Atheros AR8121/AR8113 PCI-E Ethernet Controller
Current Router - LinkSys BEFSR41 (Hardwired, CATV cable)

Static IP - 192.168.1.100, 255.255.255.0, Gateway 192.168.1.1

Problem: I purchased a new GB router, Dlink DIR825, wireless and 4 ports, and cannot connect to it to set it up. I need to get into it to change its IP address from 192.168.0.1 to 192.168.1.1 and to make a few other changes. I have 6 different ethernet cables, all of which work with my desktop as well as my laptop. I can get into the new Dlink router just fine with my laptop so it is not a bad port on the new Dlink. The cables work with my existing router and my new router using my laptop so it isn't a cable problem.

My internet connection is Hughesnet (DISH) which uses the 192.168.0.1 address, the same as the new router. So here is what I have tried:

1. Powered down Hughes router, new router, and old router.
2. Removed cable from Hughes router to old Linksys.
3. Changed static IP on desktop from 192.168.1.100 to 192.168.0.50 and Gateway to 192.168.0.1.
4. Rebooted
5. Connected ethernet cable from desktop to Port 1 on new router.
6. Powered up new router.
7. Brought up Browser and entered the 192.168.0.1. Nothing happens. The Port light on the new switch shows the connection properly and the other lights are on properly, except for the Internet light which I haven't hooked up yet.

The above does not work so I... Read more

A:Solved: Can't get to Admin screen to configure new router

Read other 9 answers
RELEVANCY SCORE 60

I'm trying to do a simple ip change to the primary lan setting on the router and an error keeps telling me that it is already being used in another pool of ip addresses. In reaction to that I turned off anything that had an ip pool and logged out and then back in again to the router, I tried to change the lan ip again and it still said that it was in another pool or it was invalid. I'm trying to use 192.168.2.X as primary lan and 192.168.12.X as guest lan.
 

A:Solved: trying to configure a surfboard sbg6580 router

So to confirm:

Under Basic > Setup, change the LAN IP 192.168.2.1 and click on Apply.
Then click on DHCP and confirm the Starting Local Address shows 192.168.2. then a box. That needs to be .2. The Number of CPEs should be no more than 253.

Under Wireless > Guest Network, make sure that the IP address shows 192.168.12.1, the subnet mask as 255.255.255.0, the Lease Pool Start as 192.168.12.10 and Lease Pool End 192.168.12.99. The Lease Time should be left unchanged. If you need more than 89 IP addresses, change the Lease Pool End accordandly.
 

Read other 3 answers
RELEVANCY SCORE 60

I have tried two wireless routers and couldn't connect
to the configuration page on either

I have tried manually assigning IP the correct adress which didn't help
I have tried resetting the routers, using automatic configurations,
using different browser softwares;
just about any normal soloution you could think of.

the routers are both new and I assume both working,
both display an adsl connection, the pc displays the LAN connection.

but I just can't open the http://192.168.0.1 type pages. It's driving me crazy

the problem must be with my pc, but I don't know what.

releasing and renewing ip from the router's factory settings didn't help either.

any ideas what it could be? I have spent over 30 hours of research and messing about to get it working

I seen some guy talking about winshock or something in the cmd functions, please help me.

here is my ip settings from the cmd ipconfig/all:

Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : Intel(R) 82559 Fast Ethernet LOM wit
h Basic Alert on LAN*
Physical Address. . . . . . . . . : 00-03-47-16-E7-6D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.2.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 192.168.2.1
192.168.2.1
Lease Obtained. . . . . . . . .... Read more

A:Solved: Can't connect to configure wireless router

Try the router's address: Default Gateway . . . . . . . . . : 192.168.2.1

Note the '2' instead of '0' in the third position.
 

Read other 2 answers
RELEVANCY SCORE 59.2

If I use the reset to factory settings option on Windows 8, will I need a disk for it?

A:[SOLVED] Reset to Factory Settings

Depends on whether the pc has a recovery partition or not. . what brand and model

Read other 5 answers
RELEVANCY SCORE 58.4

I have a Gateway Z06 laptop with Windows 7. It got some sort of virus that I couldn't remove no matter what I did. I had no other option but to reset the laptop, but when I started the Windows Boot Manager I got messages saying the following programs were corrupted:

winload.exe 0xc0000428
memtest.exe 0xc000000f

I've seen comments saying that I need to insert the Windows 7 CD, but my laptop came with the OS already installed. What can I do?
 

A:Solved: Can't reset laptop to factory settings

Read other 14 answers
RELEVANCY SCORE 58.4

hi,
I did a factory reset on my emachine et1331g and now I can't connect to Internet. Says modem error and it's a wireless connection. Also it's a desktop. Please help if you can
 

A:Solved: Factory reset. Connect problem

Did this system come with a wireless card or was it added? If it was added, you probably need to install the driver for the card. Post a screenshot of device manager.

In addition when you restored the system, you removed any stored pw. Have you scanned for the wireless network and inputted the correct pw?
 

Read other 2 answers
RELEVANCY SCORE 58.4

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) Dual CPU E2220 @ 2.40GHz, Intel64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3838 Mb
Graphics Card: NVIDIA GeForce 7100 / NVIDIA nForce 630i, 256 Mb
Hard Drives: C: Total - 296527 MB, Free - 243361 MB; D: Total - 298588 MB, Free - 296651 MB;
Motherboard: Acer, Aspire X1700
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Enabled

After Factory reset Code80072F8F error. Cannot update Vista. Tried to dl service pack 2 and was told "Thanks for the Download" but there is no record anywhere on my computer as to where the file is/went. There are no updates showing beyond 3/13/09 under Programs in the Control panel. I do appreciate you guys and any help you can give.
 

A:Solved: Problems after factory reset in Vista.

Read other 16 answers
RELEVANCY SCORE 58.4

Moving house this weekend and I want to give away my ex room mates Dell PC (specs: http://gyazo.com/8d626c5b85a227fa5ca9767b8f0bd6de) but I want to remove all the files on it first by doing a factory reset.

Theres no disks and I dont want to buy any (dont have time, I have 4 days until Im moving and I dont want to take the desktop with me) but I do have 2 installation CDs (didnt come with the dell) to install Wins service pack - not sure if this is going to help. Ive looked online and here but I still cant restore it.

Thanks!
 

A:Solved: Factory reset for Dell Pentium 4

SOLVED! Hold Ctrl + tap F11
 

Read other 1 answers
RELEVANCY SCORE 58

I recently had to perform a factory restore on my HP slimline s5212y with windows 7. Before I did this I backed up all the computer files onto an external hard drive. How do I restore the files properly? Can I recreate all users and will the backup files be put where they belong? Any help on this subject is appreciated.
 

A:Solved: factory reset and restoring backup files

How did you backup these files?
 

Read other 3 answers
RELEVANCY SCORE 58

So i've looked up and i can't really find any useful info on how to reset my Acer laptop back to factory settings. the info i did find doesn't really help. If anyone could help me out with this it would be much appreciated. I have tried methods i've found online but with no luck. and for some reason my restore points have been erased so theres no way to backdate anymore...
 

A:Solved: Acer Extensa 4420 factory reset

Read other 9 answers
RELEVANCY SCORE 58

Howdy everyone....I'm working on a Samsung 305e5a laptop and I'm getting severely frustrated, so maybe someone here can help point me towards the tools I need to figure this out.

WIndows won't load. On startup, I get the screen that says a previous run of Windows has failed to load propperly and lets me try to Launch Startup Repair or Start Windows Normally.

If I start Windows normally, I get to the windows logo and it freezes.

If I try to boot into safe mode, it loads up to a certain file then just hangs there.

If I launch the startup repair, I get to a screen with a mouse cursor and pretty blue wall paper, but no repair/recovery utilities ever actually load.

If I use a Windows 7 Repair disc, I get the same thing. The same pretty blue wallpaper but no window full of recovery options.

If I hit F4 on the Samsung splash screen to try to load from the recovery partition, I get a DIFFERENT pretty green wall paper that says "Please wait..." and again, no tools ever load. Ever

If I use a windows 7 installation CD that I have sitting around from another computer, it at least loads to a window where I get the options to install windows or repair windows. If I select repair, the window vanishes and I'm once again left with pretty blue wallpaper and a mouse cursor. No recovery tools or options.
I have a copy of Hiren's BootCD installed onto a thumb drive. I've tried loading Mini Windows XP from it but it fails to load and reboots me r... Read more

A:Solved: Windows 7 won't load. Or repair. Or factory reset.

Memtest86 has run for almost 12 hours now, completing 10 passes with zero errors.
 

Read other 2 answers
RELEVANCY SCORE 58

Hidy ho all, I just reset my Lenovo G505s back to its factory default. So far everything up to this point has gone well. Files are in place, most of the programs I needed to use are re-installed. Everything except the fact that now no flash player services are playing through firefox. Quite frankly I've never had this before. When I go to any site (using youtube as an example from here on) I get the black window where flash player should be working. But all it shows is the flash player symbol in the center, and nothing else. And firefox is the only browser that seems to have this problem. When I try to hover over the symbol, nothing. Its just an image. I've tried installing flash, and shockwave player. I have java installed and running. Has anyone else had this problem? If so, do you know how to fix it?
 

A:Solved: flash player not working after factory reset

Read other 14 answers
RELEVANCY SCORE 57.2

I need to reset xp to factory default AND wipe all personal data and files.

I don't have the manufacturers disk. I have been bitten when I tried to use a retail disk to do a reinstall to be sure of wiping all personal data on a proprietary system (proprietory key and retail disk won't work)
Every thing I could find is based on saving data, and restoring to default.
These (5) are give aways for students who can't afford computers.

A:[SOLVED] Wipe all files/data etc and reset to factory default

what Operating system? You can use dban to wipe the drive, but you will need a valid installation disc to install the new operating system.

Read other 7 answers
RELEVANCY SCORE 56.8

Getting an infinite loading sort of error where my comp goes to HP loading screen, blackscreen, turns off, and repeats. Very annoying and nothing I've seen so far is working. I don't have a disk or drive to use to reload Windows with, and I didn't set any system restore points like an idiot, so I'm stuck here. I'm not that great with computers so any help would be appreciated, thanks.

A:Stuck restarting after failed factory reset, reset still not working

What is the full model number of the HP desktop?

Read other 3 answers
RELEVANCY SCORE 56.8

I got this today "Your device is at risk because it’s out of date and missing important security and quality updates. Let’s get you back on track so Windows can run more securely. Select this button to get going"

I ran several command prompts including chkdsk,  got  a repair utility to repair registery... etc,  defragmented and everything  I tried every solution found online and  I still  get this error when useing updates.  I even updated my drivers. I tried everything,  s  I even uninstalled my antivirus and tried it again.   I gave up and tried to do a reset  and also tried to whipe everything and do a reset and can not. really odd. 

Any insight will be appreciated.

Also on the microsoft website I saw a security update dated 09/25/2017 ( today)  and when trying to manually update it said it did not apply to my pc.  I own a Dell Desktop all in 1 64-bit operating system Product ID 00325-95873-11633-AAOEM touchscreen 24 inch all in one

A:Windows 10 update issues. Also can not do a factory reset or any kind of reset

This sounds like your system took a hit with phishing-ware or other malware.
Factory reset instructions:
www.dell.com/.../reset-or-reinstall-windows-10-on-your-dell-computer

Read other 1 answers