Over 1 million tech questions and answers.

Get a error on laptop needs driver for acpi\pnpocof\1 Lenovo t410-2537

Q: Get a error on laptop needs driver for acpi\pnpocof\1 Lenovo t410-2537

I was trying to go thrue non working drivers and it popped up one bad thing acpi\pnpocof\1 dosent have a driver?? I don't have a clue what this is or I could fix it. Anyone please help win 7 pro 32 bit intel core 5 on a Lenovo thinkpad T-410 -2537

Preferred Solution: Get a error on laptop needs driver for acpi\pnpocof\1 Lenovo t410-2537

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Get a error on laptop needs driver for acpi\pnpocof\1 Lenovo t410-2537

I recommend that you post in the Win 7 forum since this is a Vista forum.

Read other 1 answers

Hi I'm having trouble finding the drivers for my device can you help me or could you provide a Lenovo Support email address that drivers can request

Read other answers

The machine starts, fan is working, no LCD screen, no beeps regardless of RAM installed or not. ON/OFF switch is lit.  Any clue how to go on?

Read other answers

I have a new LCD. BIOS shows ThinkPad LCD option activated. I have perfect picture on my external screen (VGA). ThinkPad LCD black, when I start I can notice/glimpse the ThinkPad Logo. Is there anything else I should check in order to get ThinkPad LCD to work?

A:T410 LCD issue 2537-25G

Probably you have a blown fuse on the motherboard.  It was common on that model when breaking the original panel

Read other 1 answers

I noticed that the trackpoint pin in the machine is smaller that my available trackpoints. To search for and buy what are these 'adapters' called?

Read other answers

W10 tells me to active BT when trying to connect a BT device.  In device mgr under hidden devices I find BT (3 drivers) When I try to  update these I get the message; best driver already installed. Pressing F5 BT is not visible. In Lenovo EOL there is no BT driver for W10 available. What to do? Kenneth in Stockholm

Read other answers

I run Win10. I have tried installing the driver for this via the device driver, Win10 Update and Thinkvantage update. No luck (no driver found). Any clue?


Go to Solution.

A:T410 - 2537 - Integrated Mobile Broadband (Gobi 2000 3G with GPS)

Installed a driver from Lenovo EOL for W7.

Read other 1 answers

I reinstalled Windows 7 Ultimate x64 and was wondering where I could get the fingerprint reader, bluetooth and thinkvantage drivers for my Thinkpad. I'm not really sure which drivers to get online.

A:Lenovo Thinkpad T410 Driver Help

Quote: Originally Posted by verbatim20

I reinstalled Windows 7 Ultimate x64 and was wondering where I could get the fingerprint reader, bluetooth and thinkvantage drivers for my Thinkpad. I'm not really sure which drivers to get online.

Hi verbatim, you can find the drivers here Lenovo Support - Download Drivers and Software (GB)? if you need further help post back

Read other 1 answers

Hi Guys,

I got Lenovo T410, I installed Windows 7 Ultimate, and it function well besides that I don't have comunication, no WiFi nor by cable. I assume driver is missing. Any suggestion?


Read other answers

System information:

- Lenovo T410
- Bought December 2010
- Windows 7 Professional 64-bit OEM
- Hitachi 500 GB hard drive
- NVIDIA NVS 3100m Optimus Graphics 512MB DDR3 with AMT
- 4 GB PC3-8500 DDR3 SDRAM 1067MHz SODIMM Memory (2 DIMM) + I installed another 4 GB

I have not reinstalled the OS. The laptop had BSOD's right out of the box. They are unpredictable and occur 1-4 times per day. I disabled the switchable graphics, which seemed to reduce the frequency of the BSODs a little. I've updated the system via Lenovo's System Update tool. I called Lenovo's technical service and they ran through their stock checks and it didn't help.

I've attached the dump and system file collection + system diagnostics.

Thanks for any insight,

A:Frequent BSOD - new Lenovo T410 laptop

Hi davevoyageur and Welcome.

For a stable set up your Ram should ideally be matched. Same Manufacturer. Type. Model. Size. Batch. Timings. Etc..
Have you tried uninstalling the one stick and seeing if the blue screens continue?

Read other 9 answers

I have Lenovo G50-70 Laptop Running Windows 10 OS. Few Days Back, While doing Clean install with Windows Anniversary Update, I downloaded all Latest Driver from Support.lenovo.com but while checking Today For latest Driver for my system on support.lenovo.com ACPI Driver is missing from Support Site and There is no Lenovo Energy Manager also as it was in Windows 8.1. Can anybody Help me is it necessary to install ACPI Driver if no why Lenovo Removed it?? And where can I get Lenovo Energy Manager so that I can keep system in Conservation Mode as it was in Windows 8.1??


Read other answers

Hi All,Have just bought a ThinkPad X280Have setup with  Windows 7 (64-bit)  and have  issues   STM7304 driver for windows 7 (64 bit)This is the only driver I cannot find  ACPI\STM7304 can any please tell me where I might find it.Thanks

A:Lenovo x280 ACPI\STM7304 Driver

HiIt seems the OS is installed in Legacy mode. In this case you have to disable TPM functionality (Security Chip) in the BIOS Setup. Or reinstall the OS in UEFI mode (or convert using some additional tricks) and read this articlehttps://support.microsoft.com/en-ca/help/2920188/update-to-add-support-for-tpm-2-0-in-windows-7-and-...

Read other 1 answers

I download the :Advanced Configuration and Power Management Interface (ACPI) Driver, from the Lenovo website: The link for the driver ( for Lenovo y700-15ISK) :
 Click here
I download, give permission to run, then nothing happens; no installation wizard, nothing. This is the only driver I haven't been able to update, and it is the one that is causing me serious problems with audio latency, as Latencymon v 6.50 tells me. I get crackling sound from speakers, but when I disable the ACPI driver, the crackling goes away. The problem is that if I disable the ACPI driver, I am no longer able to see my battery status. So it is important that I update this driver. However, I don't know how it is possible that the driver provided by Lenovo does absolutely nothing at all.
Mod Edit: Corrected the text format so message displayed correctly

A:Lenovo y700 ACPI Driver, not installing

The fix for this is to go to safe mode (on windows 10) : Settings-> Update & Security-> Recovery : press restart now -> After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options >Startup Settings > Restart-> After your PC restarts, you'll see a list of options. Select 4 or F4 to start your PC in Safe Mode. then in safe mode go to device manager ->System devices  right click on Lenovo ACPI-Compliant Virtual Power Controller  -> Uninstall  Double click on the ACPI Driver you downloaded. this should fix the problem.

Read other 1 answers

hello folks, i have another problem with a lenovo product!lenovo yoga 20FQthere is a device in the devicemanager i am not able to find a driver for that.1.) this driver is NOT included in enterprise management package2.) this driver is NOT listed on http://support.lenovo.com/at/de/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x1-... so where can i get this driver? devicename: ACPI\MSFT0101 need fast help.thanks!

A:lenovo yoga acpi driver windows 7

problem solved! intel PTT does not work with windows 7 - i have disabled it in bios!

Read other 1 answers

I noticed that new drivers were released for G580. The drivers (Lenovo Enegry Management Driver) canot install because when the installer starts up, it immediatelly closes. Do I have an issue somewhere? Windows 10 (1511, Build 10568.17)Lenovo G580 (20157)

A:Lenovo G580 Windows 10 ACPI Driver not installing?

hi acemod13,
I looked at the Lenovo Energy Management driver for Windows 10 and upon observing the installer behavior, it extract the ACPI driver files (58KB) to C:\ProgramData\Lenovo\ACPIDriver (this may explain why the installer closes right after extracting).
If you're seing an Unknown Device in the Device Manager with an ACPI hardware ID (see image below) then try to update the driver manually and point it to the C:\ProgramData\Lenovo\ACPIDriver folder
 - Sample image
If you're unable to see the driver files, I've uploaded them here.
Let me know how it goes.

Read other 2 answers

Lenovo Ideapad 710S's ACPI driver just got updated on 14 Sep 2016. However, I can't get it to install. Its installer closes immediately upon launch, similar to the cases here: Lenovo G580 Windows 10 ACPI Driver not installing and Y500 ACPI driver not installing. ACPI driver: Laptops-and-netbooks :: 700-Series :: 710S-13isk - Lenovo Support (SG) -Advanced Configuration and Power Management Interface (ACPI) Driver for Windows 10 (32-bit, 64-bit) ... Any advice is greatly appreciated.

Read other answers

I bought a new ideapad 320 and installed the drivers, all of them installed properly except for the ACPI Driver from:https://pcsupport.lenovo.com/ng/en/products/LAPTOPS-AND-NETBOOKS/300-SERIES/320-14IKB/80XK/downloads... The installer extracted the setup file to C:\Drivers\ACPIDriver but I can't start the setup file, if I click it, it does nothing and I checked Device Manager and the ACPI Driver is not installed.

Read other answers

I would like to ask, my laptop currently in window 10 pro and been quite good. however, i experience a problem, and when i try to diagnosed it, it stated read verification error. and when i try to swtich on my laptop, it stucks at after the boot logo of thinkpad, then stuck at a black screen with this sign ( - ) keep blinking on and off. So is my laptop will be able to be fix? 

Read other answers

I finally got that dreaded "Fan Error" at boot time on my T500.  After some research on this board, this is what I have concluded: 1-  hit Escape, and the machine will boot.  It can do a lot of stuff without a fan turning.  Gaming caused it to overheat.  Either the processor would slow down (by being intermittant) or you get the black screen of death. 2-  It is relatively easy to follow the Hardware Maintenence Manual and remove the fan and heatsink assembly.  Once the assembly is removed, pry open the fan, and remove the blades and clean and lubricate the shaft.  My fan restarted, and the Fan Error went away.  No need to replace the fan. 3-  Unfortunately the machine overheats now (black screen of death), even though the fan does operate.  I traced this to a too liberal application of the thermal joint compound.  Made the compound a very thin film, and that seems to have helped.  Also when replacing heat sink assembly and before bolting it, wiggle it while pressing on it so the thermal joint compound spreads itself at the surfaces of contact.  This seems to have helped. Anything else that you may want to add to this thread?

A:Fan Error Lenovo T500 T510 T400 T410 T60 T61 - rejuvinating the fan

I run into the similar problem here.But even after I clean the fan assembly, the 'fan error' message persists. In fact when the machine is powered up, the fan will run about 3 second, then stops. The sys. self test then reports the error.It is quite weird. The fan is apparently working. The online search does not return much useful info.Anyone likes to comment?

Read other 6 answers

Hello please i have problem my notebook suddenly restarts and give me BSOD ACPI Bios error.i tried everything like load default settings etc. but nothing works.I tried to get lenovo recovery image but its say nothing to download for my notebook  

Read other answers

i have an ibm thinkpad a21m that was put together (mobo, hd, ram, cd, floppy, etc.). installed xp. worked fine. it had "unknown device" on device manager. i used msinfo32 to identify that it needed acpi (advanced configuration power interface). i installed it. the unknown device error went away. when i restarted the system, it keeps going into hybernation after 2-3 minutes. i unplugged cmos and main battery. reset hybernation option to never, reset all the bios to default. still goes into hybernation. my question is: would it go into hybernation if the cpu gets hot? or is there another problem that i'm overlooking?

A:Ibm laptop going into hybernation after installing acpi driver

Most likely an overheating issue. Someone answered your post on another forum with good info so I won't retype it: http://tinyurl.com/3y3pg5
Also look at the bios settings to disable anything related to Hibernation.

Read other 2 answers

I'm having a problem with a Lenovo H500 desktop.  It will not boot.  I get an ACPI_BIOS_ERROR) and it automatically restarts.  It originally had Windows 8 and was upgraded to Windows 10 about 1 year ago.  I've created bootable USB sticks for windows 10, windows 8, and windows 7 and i get the same message with all (ACPI_BIOS_ERROR).  I made a linux bootable and it too won't run due to an ACPI problem.  The only thing i can run is the Lenovo bootable USB diagnostic tool.  All tests check ok with the tool.   I've tried every imaginable bios setting and nothing works.  I removed the HDD and hooked it up to another computer via a usb cable and was able to at least copy all my files.  I can see that everything on the HDD, including the recovery partition, is still intact.  I am out of ideas.  I would love to re-flash the bios but that is impossible without being able to boot the computer.  Unfortunatly I don't have a recovery disk or I would try that. Anyone have any ideas???

Read other answers

When i updated from Windows 7 to 8 i found that this driver had a problem. Error Code 28

Can Anyone Help?

A:Error Code 28 - Unknown Driver Microsoft ACPI-Compliant

To know how to identify unknown devices, find and download, install
follow this link… How To Find Unknown Device Drivers By Their Vendor & Device ID

Read other 1 answers

Hello. I have a Toshiba A305-S6845 laptop, whose specs can be seen here:

Recently it has been shutting down on me when I play games. Specifically, I think that it is overheating, or it's a heat related issue as the computer tries to throttle down my speed (hence acpi problem?). Anyway, I've been playing games on it for over a year, but only now does it start to fail on me. Non-coincidentally, this starts happening after I installed windows 7. The computer came with vista, which I never used, and windows XP is what I ran the first year, which worked without a hitch.

When I scroll through the windows error logs, there is an error which coincides with the shutting down:

The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.Click to expand...

Anyway, I have narrowed down my problem to a few culprits:
-dried out thermal grease (apparently can be a problem with toshiba)
-driver/bios problem
-Windows 7

Since this didn't happen till windows 7, I am thinking that it is the latter. There is a BIOS update available but I don't see anything in it which would apply to me.... Read more

Read other answers

I have a Satellite Pro L300 with Windows Vista and it has been temperamental to say the least, causing me to reboot the whole system a few times.
The last couple of times, it has since not stopped coming up with an error message saying 'Can't open ACPI ATK0100 Kernel Mode Driver', and I understand that this may be what is causing it to have subsequent problems.

I have tried updating the BIOS, reinstalling drivers, and, searching for answers and, of course, reinstalling the whole system, but I still get this message every time I turn my laptop on and I really don't want it to give me blue screen of death again - please help me!


A:Satellite Pro L300 shows ACPI ATK0100 Kernel Mode Driver error

Wait a moment.

You?ve made clean Vista installation using original recovery DVD and you get this error anyway (no additional software is installed)?

Read other 4 answers

Hello, I need the Drivers for install die Device with Hardware ID ACPI\BCM2F36 I think that this is the NFC Driver. I can't find anything. Regards


Read other answers

I have been getting regularly occurring BSODs with various errors. Looking for help please.
The dump output from BSOD program and performance monitor data are attached.

The system is:
Lenovo T410
Current OS is Windows 7 and is the one that came with the system.
System is 3 or 4 years old.

The BSODs seem to occur during heavy browser usage. Having multiple tabs opened and switching back and forth between tabs, the browser, and desktop apps. But almost always (if not always), when I am in a browser window.


Paul T.

A:BSOD Lenovo T410

Additional info ... The internet browser being used seems to be unimportant. I get BSODs with Chrome, Firefox and IE.

Paul T.

Read other 7 answers

Hi everyone,
Need a new laptop for my computer science degree, considered quite a few. Was just wondering if anyone has an oppinion on the Lenovo ThinkPad T410 2516, I would upgrade it as follows:
i5-460m processor
windows 7 home premium 64
320GB 7200rpm hard drive
9 cell battery
Anyone think i should upgrade it differently, I'd like to get it a little cheaper so where if anywhere should i make the cuts in upgrades?
Has anyone got this laptop? is it particularly heavy to carry around?

A:What do you think of the Lenovo ThinkPad T410?

what the difference in 3 and 4GB memory - i would not expect you to use that amount of memory unless you are using some special heavy memory programs

what other choice of CPUs do you have

Read other 2 answers

Hello there folks. I've got a ThinkPad T410 that I has no charger as I threw it away, the cord frayed, didn't work and threw off sparks everywhere. Since then the T410 has just been sitting in storage but now I'd love to get it up and running again. Thing is, I don't remember which charger I need. Lenovo's official page for the T410 says it supports a 65w and a 90w charger and I don't know which one it needs. Does it matter? Thanks, have a good day.

Have a good day.

A:Need a charger for Lenovo T410

Hi Ram,
Welcome to Lenovo Community!
As I understand that you have query regarding T410 AC adapter. Yes, you can use both 65W & 90W Adapter depending upon your usage.
Normally 90W Adapter is used when you are using the system with dock as it will consume more power 
List of universal adapter for your T410 65W & 90W
And for more details you can go through the parts list or HMM, page 179
I hope the above information helps. Please feel free to post in Lenovo Community Forums if you have any further queries!
Tap that Kudos button if I helped.If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Read other 1 answers

What is max ram can be upgraded too I've been told 2 x 4gb could I not get away with 2 x 8gb? 

A:Lenovo thinkpad T410

Welcome to the forum!
Max RAM for your T410 is 2x 4GB. While a 8GB module will fit in, the laptop most probably won't boot.

Read other 1 answers

Hi, everyone.

I hope someone here can help me, as I can't seem to solve this problem I'm having.

Basically, I have two laptops here. There is my brother's Toshiba Equium L40-156, and a HP Compaq 6720s.

I made an image of the hard drive in the Toshiba laptop, and restored that image to the HP laptop. I have spent the afternoon installing most of the necessary drivers so that the OS from the Toshiba laptop can run on the HP laptop.

The error I am having, as stated in the title, is that the message "Can't Open ACPI ATK0100 kernel Mode Driver" appears every time the system loads. I have tried researching this error, but I didn't have much luck. As suggested on various sites around the web, I have tried a few versions of the driver for the display adapter ("Mobile Intel(R) 965 Express Chipset Family"), but none seem to resolve the error. Nothing in Device Manager has a triangle to indicate an error.

Any insight into the situation would be greatly appreciated.

Thanks in advance,

A:"Can't Open ACPI ATK0100 kernel Mode Driver" error at boot.

I'm surprised this has worked at all for you to be honest, I wouldn't even know where to begin on all the problems you are likely to have with this scenario.

...wouldn't be surprised if authentication fails on you either.

Read other 9 answers

Hi Can I use Battery from Lenovo ThinkPad T410 in Thinkpad T400?

A:Can I use Battery from Lenovo ThinkPad T410 in T40...

No.  It is a different shape

Read other 1 answers

Hi. lenovors:I recently purchased a refurbished lenovo T410 from the newegg. Upon receiving it, I have been in love with it. But two weeks ago, I encountered [0xc000000f] error message while I was doing a resetting it to out of the box condition. Since it was around thanksgiving, I decided to upgrade the computer. I bought an 8G memory and 256G ssd. Now I am having the following problems:1. With the original hdd in, windows was fine, I switched out the one original 2g memory to the new 8G memory. After I turned on the computer, it passed on the window log (starting) without moving. Basically, it was stuck after swapping the 2g original memory with a newly bought 8G memory.The original memory is Hynix, HMT325S6BFR8C-H9,SODIMM, 2G, 204 Pin, PC-10600 (Bus Type), 1.5ns (Cycle Time), CL9, 1333Mhz (Data Transfer Rate), 166Mhz (Memory Clock)The new 8g memory is: Team 8GB 204-Pin DDR3 SO-DIMM DDR3 1600 Laptop Memory Model TSD38192M1600C11-EWhen I put the new memory in, got into BIOS, the computer recognized it, it show the total memory as 10G.Please advise me if anything I could do to get this memory work out, otherwise, I have to return the memory back to newegg.2. I swapped out the old hdd to new ssd. It does not have issue with hardware. Since my old hdd has [0xc000000f] error message, I installed my own copy of windows7_pro_with_SP1. The windows7 was installed successfully. However, now my wireless, wire internet connection seem not work, also, when I was with 'old' hdd, my compu... Read more

A:lenovo T410, upgrade (add more) memory, hdd to ssd...

 The ThinkPad T410 doesn't support 8 GB DDR3 modules. You need two 4 GB modules.

Read other 1 answers

Anyways my Lenovo ThinkPad has started to go laggy all of a sudden and I think its because of a virus bc my anti-virussoftware (Avast) always says that it blocks multiple urls that are supposedly infected and similar things like that, but factory restore seems to get rid of most viruses and I'm not exactly sure if my lappy has a virus or not, but it still lags and it could be adware or something like that meaning that it'd be a minor one, . I tried following guidelines how to do a factory reset but it wasnt the right guideline. But anyway, how do you factory restore a Lenovo T410? Any help would be greatly appreciated

A:How to do a factory restore on a Lenovo T410?

Welcome rex1. Backup all your data to other drives (external USB HDD or thumbdrive)
2. Restart your machine, Press ThinkVantage button during ThinkPad logo (POST) to launch Factory Restore
ThinkPad W520 | ThinkCentre E73 SFF | IdeaPad K1 | IdeaPad Yoga 11s | Miix 2 10" | 3000 Y300 | Yoga Tablet 2 Pro
Give kudos to reward people for their assistance | Mark thread solved if the solution works | Please do not send me an e-mail regarding technical questions | I am not an Lenovo employee
Dolby ; IdeaPad Slate Tablet

Read other 2 answers

Hi guys and/or girls, I am working on upgrading a business laptop which happens to be the Lenovo Thinkpad T410, now im putting an 250GB 850 Evo to replace the INSANELY SLOW HDD, however i am also upgrading the system from windows 7 and upgrading the RAM, now here is where i need help, I am going to be installing a 2x4GB kit of Corsair Vengence SODIMM, however I am unsure whether i should go for the DDR3 1600 kit or the DDR3L 2133 kit, now these are both the same price so the obvious pick would be the DDR3L due to the lower power draw and higher frequency, but the current memory installeld is only 1333, however the laptop is documented to work with 1600 so i know this isn't a problem, however I am unsure if it would even correctly downclock the 2133 or would it simply refuse to post, as well as this, would the laptop still attempt to send 1.5v to the memory or will it automatically do 1.35v as required by the DDR3L, oh how i do wish laptops all offered an "advanced" section within the BIOS which would allow me to tweak all of this stuff, however the only thing the bios lets me do with memory is set an extended mem test during boot which obviously is no help.  Thanks for your help 

Read other answers

I need some help please:

I keep getting a BSOD like clockwork on my Laptop.
The Laptop can run in safe mode with no issues....Tested this last night and this it was still on this morning.
I initially thought it was the ram so I removed the onboard 4Gb and replaced it with a new chip.
I thought it was the video drivers so I tried all Lenovo's recommended drivers but it doesnt work cause according to the drivers I dont have a graphics card.
I reloaded windows 7 32 to bit by doing a clean install and have not loaded any other drivers except the ones thats generic by windows7.
I am clueless as I have tried every angle possible.

Anyone pls

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.
Locale ID: 1033
Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 85C3C01C
BCP3: F61EA240
BCP4: 00040150
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that help describe the problem:
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
If the online privacy statement is not available, please read our privacy statement offline:

A:Consistant BSOD Lenovo I5 T410

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.

To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\M... Read more

Read other 5 answers

I have windows 7 and im new in using it. I recieved error acpi\pnpocof\i, when i used my archos 404 to download pics i had saved off an old computer operating with windows xp. What does it mean and how do i fix it.

Read other answers

HelloI am planning to update my t410 with an egpu adapter.What interface should I consider? Express card or maybe pcie?Which version of the express card is in that platform (t410)?And I really want to know the same about pcie.

Read other answers

My lenonvo (thinkpad) t410 is stuck in startup. I was checking email and I noticed that my screen was freezing up a bit when an error message box came on screen (unfortunately I did not take note of what it said) and my computer began to shut down by itself. I hit the power button to make sure it wouldnt restart and gave it 20 minutes before i went to turn it back on. Now when i try to turn it on, it shows the lenovo splash screen but then goes black and shows the splash screen again, never proceeding to windows. I have spent most of the say looking up possible solutions, but while many people have had similar problems, most other posts involve system recovery options, which do not appear on my screen. It is allowing me to boot into BIOS but I have not been able to find a solution there. Do I need to reinstall Windows? Please help.

A:Lenovo T410 stuck in start up loop

Read other 6 answers

Hello,  I have a lenovo T410 with stock memory 2x2gb ramaxel DDR3 1333, on windows 7. I want to upgrade the memory by upgrading one slot to 4gb. I have bought a G.skill F3-12800CL9S-4GBSK. After replacing one of the slots with the new memory - windows won't boot, sometimes the windows icon shows for a moment and then the computer reboots, and sometimes I get BSOD with the error "IRQL_NOT_LESS_OR_EQUAL"  Windows startup recovery gives the same result.  The memory is recognized by the bios and I can see the memory increment.  Tried to change bios SATA setting from AHCI to compatability with no success. The memory works fine on Fujitsu Ah532 running windows 10. Please help! 

Read other answers

Hello, i have a lenovo thinkpad t410 that doesnt want to boot up and stays at the thinkpad screen, i fixed a fan error that it had and later started up with this problem please help

A:Lenovo thinkpad T410 startup problem

i fixed a fan errorClick to expand...

Describe how you fixed the fan error.

Read other 1 answers

hi, i have a laptop lenovo T410 that run on window xp.
After running the window, i am prompted to log in but i forgot the password.
So what must i do. How do i reset the laptop to its original factory setting.

A:how to reset lenovo T410 to factory setting.

All your files will be lost. Do you want to recover them first?

Do you know the Administrator password?

Do you have a blue button above the keyboard?

Read other 3 answers

Hi, After scanning my HDD on linux with this command : sudo smartctl -q errorsonly -H -l selftest /dev/sda I get this output :sudo smartctl -q errorsonly -H -l selftest /dev/sda
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
Failed Attributes:
5 Reallocated_Sector_Ct 0x0033 001 001 050 Pre-fail Always FAILING_NOW 16376

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: unknown failure 90% 7882 0I can't install an OS on sda because it's blocked in read/write. So I'm looking for a  HDD low  level formater(iso or software)  in Linux or windows for my  Lenovo think pad t410(serial number : R8L4H40). Thanks 

Read other answers

Lenovo thinkpad T410 SIM card inserted but not detected

A:Lenovo thinkpad T410 Sim cards not detected

Welcome to the CommunityIs the laptop equipped by built-in wwan modem either?

Read other 1 answers

I am having trouble getting the built-in wireless adapter on this laptop to get connected to the internet. I have installed the following driver:
but have had no luck. there are no available wireless connections I can connect to.
I have also tried to use USB wireless adapter TP-LINK TL-WN725N to connect to internet. It is able to find available connections but when it tries to connect it says unable to connect and give options to troubleshoot. Once troubleshoot is complete it says to investigate router or access point issues. I have reset the router many times. Other devices are working fine with the internet just not this laptop.
I am running windows 7 64Bit.
Please help.

A:Lenovo Thinkpad T410 wireless issue

Can you connect the laptop to the router using a cable at all ?

using just the laptop wireless adapter
unlikely to be this as it is reporting NO networks available - but check anyway please
Check the wireless is switched ON
theres often a physical switch or a combination of the FN and one of the F keys to toggle the wireless on/off
often F2 is used - but note , not always - look for a symbol that looks a little like (( i ))

is the wireless on?


can we see an ipconfig /all - see how below
do a tcp/ip reset - see how below
post a screen shot of xirrus please - see how below


ipconfig /all

We would like to see the results from an ipconfig /all - post back the results in a reply here.

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the information above ... Read more

Read other 1 answers

Recently my T410 laptop has had issues with charging the battery, the battery is plugged in and not charging.I have attempted updating the firmware for the battery, it failes half way through as the battery cannot be not identified.The lenovo power mannager does not resolve the issue either as it cannot detect the battery. Any advice on diagnostics or resolutions would be greatly appreciated, as after contacting lenovo support, they simply told me to replace the battery. Which I am happy to do but only as a last resort. 

Read other answers