Over 1 million tech questions and answers.

https error turn on TLS - TLS is ON and NO I don't want to turn on SSL

Q: https error turn on TLS - TLS is ON and NO I don't want to turn on SSL

In the last couple of months we have begun seeing some of our secure sites failing in IE. Many will work in Chrome or in Firefox, as a business standard we prefer IE. The SSL is off by GPO. TLS 1.1 and 1.2 are on (TLS 1.0 is off for a reason-but
had this problem even before the change.) Have turned off and back on by GPO and still have issue. We do not want to turn back the clock and use SSL (nor would our auditors permit it). Any suggestions?

Rebecca Palmer

Read other answers
RELEVANCY SCORE 200
Preferred Solution: https error turn on TLS - TLS is ON and NO I don't want to turn on SSL

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 75.2

Hi, I?m new to TechNet so sorry if ive followed procedure!
I?ve just setup 15 Windows 10 PC's in a new ICT at a Primary School. I?m trying to roll out software via ninite.com to save time but I?m getting the above error. Like
others if install a different web browser like Chrome its fine. I?ve tried resetting IE 11 back to default and I?ve played around with the TSL and SSL settings under advanced till I?m blue in the face. I run light speed Rocket as my web-filter and I have no
issues on any other OP or devices within school that i am aware of.  Issue but be with IE and how it sees specific sites. 
Any advice would be appreciated. 

Apologies if this has been answered previously
Mick

Read other answers
RELEVANCY SCORE 64.8

Hello everyone. Thanks for your access to this thread.
Today, I want to ask you about HTTPS Scanning feature provided by anti-malware solutions for consumer.

For example, Bitdefender Internet Security 2018 has a feature which was named "HTTPS Scanning" for scanning malware incoming through HTTPS (SSL) traffic of browsers.
I am using Bitdefender on one of the my PC and this feature is working correctly on my PC now.

By the way, when I turn on this feature, the SSL certificates of each websites are replaced with a fake certificate provided by Bitdefender.
This is not good for me to confirm correctness of the website.
Especially, the websites, which are having EV-SSL including corporate name are not able to be confirmed by me.

But some anti-malware solutions (e.g. Avast Free, F-secure, and more) are providing HTTPS Scanning feature without replacing with the fake certificates by them.
These solutions are not preventing original certificates like EV-SSL.
It is very good for me to confirm the web site.

AV-Comparatives's Real-World Test is judging some security solutions on default configure of them.
And, "HTTPS Scanning" feature of Bitdefender is enabled as default setting.

Question 1:
Should I turn on "HTTPS Scanning" provided by anti-malware solutions for consumer PC?
In these days, many websites (... even dangerous and fraud websites) are preparing HTTPS (SSL) connection for access users.
If the user disable HTTPS Scanning feature, will m... Read more

Read other answers
RELEVANCY SCORE 64.8

I am having issues with accessing any of my local devices (switches, router, firewalls, etc.). When accessing a LAN device, as https://10.0.0.254, from IE, Firefox, or Chrome, I get an error, such as "Turn on TLS 1.0, TLS 1.1, and TLS 1.2 in Advanced
settings and try connecting to https://10.0.0.254
again. If this error persists, it is possible that this site uses an unsupported protocol or cipher suite such as RC4
(link for the details), which is not considered secure. Please contact your site administrator"
I can access the devices from other computers. How can I fix this? I know this is due to the cert, but I don't care about the cert security as I know where I am connecting to and most of these devices have self-signed certs.
Thanks.

Read other answers
RELEVANCY SCORE 64.4

Hi

I have configured ad-hoc network for internet sharing from my PC. Normally I start it by
netsh wlan start hostednetwork
As I noticed the hotspot is automatically turned off when I turn off WiFi adapter. So I have two questions:

How do I turn on WiFi by command line, so that I can control it from various commandline scripts?
How do I configure the script for WiFi for autostarting hotspot whenever WiFi is turned on?

netsh wlan ...

A:How to turn on WiFi adapter from command line / How to turn on hotspot

  
Quote: Originally Posted by Anakunda


Hi

I have configured ad-hoc network for internet sharing from my PC. Normally I start it by
netsh wlan start hostednetwork
As I noticed the hotspot is automatically turned off when I turn off WiFi adapter. So I have two questions:

How do I turn on WiFi by command line, so that I can control it from various commandline scripts?
How do I configure the script for WiFi for autostarting hotspot whenever WiFi is turned on?

netsh wlan ...


Ad-Hoc requires that you restart the session each time.

Connectify pro has an auto start option that does this but it's a paid version, connectify lite is free but I'm not sure if has auto start.

Download - Connectify

Read other 8 answers
RELEVANCY SCORE 64.4

I have a bit of a strange issue with my computer. Forgive me if I'm a little too descriptive, but I'm not sure which details are relevant and which are not for such a problem. First, the specs:

Model: eMachines T2984
Operating System: Windows XP Service Pack 2
Processor: Intel Celeron D Processor 340, 2.93 GHZ, 256K L2 Cache, 533 MHZ FSB
Power Supply Unit: Bestec Model: ATX-250-12E REV: P7
Motherboard: I can't tell, but it appears to be an Intel motherboard by the number of Intel labels on it
RAM: 512 MB DDR SD originally, added 1 GB a couple of months ago
Let me know if you need anything else...

Yesterday, I got home from shopping around 1PM, and I tried to start the computer. I pushed the power button, and nothing happened. I checked all of the cords, and they were all plugged in. Not knowing what else to do, I opened up the case to see if there was something obviously wrong. The only thing that I noticed (other than a bunch of dust) was that the power supply unit was still hot. I shut the computer down about 5 hours earlier after about 20 minutes of use, so it seemed strange that the power supply was still hot. I unplugged the computer just in case there was some sort of fire hazard.

At this point, I called a friend who suggested that the problem might be with the motherboard or the power supply unit.

A few hours later, I plugged it back in to try to get it to work. As soon as I plugged it in, the entire unit suddenly started "running" by itsel... Read more

A:Computer Doesn't Turn on, Fans and Some Lights Turn on Automatically

I would suspect that the Power Supply Unit (PSU) is going south. If you have a spare one laying around, install it and see if the problem goes away.
You can buy a new,better PSU from Newegg for about $40.00. I have used a Thermaltake 430 watt in one of my machines for some time now and it works well.
You will have to check the size of your PSU to be sure a new one will fit into the eMachine.
Here's the page with that PSU on it. It's the last one on the list.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010320058+50001379&name=Thermaltake
 

Read other 3 answers
RELEVANCY SCORE 64

Hi to all Eight forum.
I m here with a strange problem, it happens from yesterday, the problem is when I playing games on my Dell inspiron N4050 and then the main power where the charger pluged in is turn off (it is the most problem in my country that there is heavy short fall of power), the laptop is remain ON just for 2 or 3 seconds and then its suddenly OFF. its not happening before, why is that,? why is the laptop didn't get power from the battery.?
.
when not playing games. and the main power (electricity) is gone, then this problem is not occurred.
plz understand my problem and reply me.
sorry for my bad English.

A:Laptop suddenly turn off when main power turn off.

Could it be overheating protection?

Read other 16 answers
RELEVANCY SCORE 64

So I have already tried the solutions such as boot up the pc and press shift and such to get a menu and then download somthing on a usb and get into an administrator account.The Administration account I can at least log onto as it's not password protected but I still can't turn on Wi-Fi which basically defeats my whole purpose of using the computer as I use it for gaming. So regarding me not being able to log into my actual account, I've tried resetting my password multiple times without success. I think it's due to the fact that I am not able to connect to any Wi-Fi spots (which I assume is because of safe mode which I can't turn off for some reason) And that brings me to my next point, of I can't connect to Wi-Fi die to safe mode. I have tried to turn off safe mode in the settings but when I press the button for it to turn off it slides back over to the on side. Please let me know if you have any other solutions that I have not tried yet, Thanks !

Read other answers
RELEVANCY SCORE 64

This is driving me crazy. My HP has Windows 7 and everytime it connects to the internet (wireless connection) Windows Live Messenger opens down in the left hand corner taskbar near the start menu. I close it, and fifteen minutes later it will open again.
I opened the options and unchecked the boxes pretaining to 'Run Windows Live Messenger when windows starts' but it still repeatedly opens. I use hotmail, but i really have no use for Messenger. The program is not listed under add/remove programs. Someone please help me turn this thing off.
 

A:Solved: Windows Live Messenger-TURN IT OFF TURN IT OFF!

It should be listed in Programs & Features under Windows Live Messenger or Windows Live Essentials. If you still can't find it listed then go to get.live.com and re-download the installer, reinstall it, then uninstall it.
 

Read other 2 answers
RELEVANCY SCORE 64

Wife updated Norton twice and had two Norton Firewalls and Windows Firewalls running together. Paid twice for the 2 updates. Removed Norton Completely and then re-installed Norton 360 Security Version 5, but am still unable to turn off Windows Firewall under Windows XP Pro and also cannot turn on Automatic updates, getting message "we're Sorry, the Security Center could NOT change your Automatic Windows Update setting. To try changing these settings, go to SYSTEM in Control Panel. On the Automatic Updates Tab, select AUTOMATIC (recommended) and then click OK. None of this works, then tried using an app to reset Security Settings and that didn't work either. Any suggestions on what I try next. I would like to reinstall Norton 360 Internet Security Version 5, I know there are those out there that hate Norton and the overhead that comes with it, but over the years I've gotten used to it and I like it very much. Thank you, PhotoRay

A:In XP Pro can't turn off Windows Firewall or Turn on Automatic Updates

How did you remove Norton in the first place?

Read other 3 answers
RELEVANCY SCORE 64

Hello Folks,

I'm not sure if my issue is with hardware (possibly MB?) or graphics card, so please forgive me if I've posted in the wrong section. The first problem I was having was random blue screens of death that displayed graphic card driver issues. I was able to remedy that by updating my graphic drivers and have not had an issue since.

However, ever since then I have been running into another hardware or graphics-related issue that is random and completely stumping me. What is happening is, I will be on my computer, leave and turn my monitor off, and (randomly) when I come back to use my computer again, when I turn on the monitor there is no signal and a black screen (e.g. when I turn my monitor on my desktop will pop up and the light on my monitor will turn blue, when it doesn't turn on there will be a black screen and the light on the monitor stays yellow as if it is idle). I have tried swapping out the monitor to see if that was the issue and the same problem persists, so it does not appear to be my monitor or VGA cables.

The only way I can temporarily fix this issue is to reboot/restart my computer and viola! The monitor works again and I can see everything. This issue is very random. Sometimes I can go weeks without an incident, other times this is happening a couple times a week. I honestly don't know if it's my motherboard or video card or what. My PC isn't overheating, I'm not overclocking, and all of my drivers are updated.

I'm not sure what... Read more

A:Turn Off Monitor, Turn On Later and Black Screen, PC Still Running

try checking your power options settings and set it to high performance then check in advanced power settings and do not allow hard disks to sleep

Read other 1 answers
RELEVANCY SCORE 64

Hi!
I have this issue that when I turn on my computer, the power LED does not turn on but you can hear the fans working properly. I don't the issue and I'm not much of an expert with computers. Please help me solve this issue because I'm completely clueless.
 

A:Try to turn on my computer but only the fans work and the power led does not turn on

How old is the computer, what was the last change you made to the computer and when you last shut it down did it shut down correctly?
 

Read other 3 answers
RELEVANCY SCORE 64

I can't turn my computer on. The fans and lights turn on for a second and then turn off. a few seconds later they'll turn back on and then turn back off. I've had this computer for 4+ months now, i built it myself. it recently started doing this but i'd just turn off the PSU (Power Supply Unit) and turn it back on and it woould fix it. now it doesnt fix it anymore. i've re-slotted the RAM (Random Access Memory) and pushed it in firmly, but that hasn't done anything. i've tried different power outlets and pushed everything into the MOBO (Motherboard), i havent messed around with CPU (Processor) because that's just a pain in the a**... i was wondering if there was anything else i could do before having to take it into a local repair shop, lol.

as for my computer specs

CPU (Processor): Fx-6300 AMD
GPU: R9-270x AMD
RAM (Random Access Memory): 8GB Ballistix sport
MOBO (Motherboard): ASRock 970 Extreme3 R2.0
PSU (Power Supply Unit): Corsair X500 w 80+
Case: Rosewill GALAXY

thanks
 

A:Fans turn on, lights blink and then turn off/on repeatedly.

First, I would unplug everything that isn't necessary. Everything external except for the keyboard and monitor. Internally, just leave the CPU, RAM and video card installed. See if it turns on. If not, you might try and test the power button. Disconnect the power button from the mobo. If the pin headers allow for it, use the reset button as the power button. If not, you can use a flat head screwdriver to power on the computer (cross the two pins for the power button with the blade of the screwdriver). If you do this, just be very careful. Touch only the power button pins and nothing else! You could easily damage components by touching the screwdriver to the wrong thing.

Some motherboards have a power button right on the board that you can press to power on the computer. I looked at a pic of your board and didn't notice one.

If that doesn't do it, plug the power button back in. You might try and play around with the RAM. I don't know if you have 2 or 4 sticks of RAM, but try and boot the computer with only one stick of RAM at a time. If there's a bad stick, you'll find it through this process of elimination.

If none of the above works, then it might be a bad PSU.
 

Read other 1 answers
RELEVANCY SCORE 64

Running Windows Vista Ultimate.

Display turns off after about fifteen minutes regardless of whether I am actively using the computer or not. The only way to turn the display back on is to close and then open the lid. This disconnets me from AOL, so I have to sign back on again, and if I was emailing, I might lose my current email.

Under Power Options, I have 'Turn off the display' set to Never for both On Battery and Plugged in. Under 'Put the computer to sleep' I have both On battery and Plugged in set to never. Nonetheless, the display still shuts off while I am working.

What do I need to do to prevent the display from turning off at odd intervals?

A:Vista Ultimate x64: turn off display, will not turn back on

sounds like your display drivers are crashing.

Do not rely on windows update drivers - go to graphics chipset manufacturer website and get latest drivers

Read other 6 answers
RELEVANCY SCORE 64

Hi All,
 
I am using Windows 8.1 and had to refresh my computer as I was experiencing some problems. Everything seemed to be normal so I started slowly installing the programs I had before. Now a few days after, I find that my wireless device is Off and Flight Mode is On. I have been in settings but the relevant switches are disabled.
Can anybody tell me how to fix this please ? I really don't know how it happened. Can it be that my laptop is still infected ?
 
Thanks,
Robert

A:Turn Off Flight Mode & Turn On Wireless Devices

Is there a physical switch on your laptop for wireless? Often on the edges of your laptop... easy to miss.

Read other 7 answers
RELEVANCY SCORE 64

I just put together my first computer 6 months ago. It abruply shutdow in the middle of writing a paper for school. I couldn't turn it back on right away. after trying a few times, it turned on. All the fans are working even the fan on the power supply, the motherboards lights are on. My graphic card in on the motherboard. I think it might be my power supply because when I first put it together I didn't plug in the smaller power connection to the motherboard and the same thing is happening, black screen. It's like my computer isn't giving my monitor any feed. I will have more info when I get home. I can't get in to bios or safe mode.
 

Read other answers
RELEVANCY SCORE 64

Hello Microsoft team,
We need for an application to unplug and replug usb3 - not physically but with a program.
We checked a lot on the internet but did not find answer how to do it in windows 8.1 pro (in c++).
We know that hibernation creates something alike, but how can we only turn down the power of usb3 and return the power back on back via program (in c++).
Thank you for your help.

Read other answers
RELEVANCY SCORE 62.8

I use Word
I press CTRL H to replace text everywhere
I input my text and search
And then press Alt + A - this is meant to select 'Replace All'

I've been doing it for years
Always used to work

Now...
All works 70% of the time
30% of the time... Sniper tool turns up thinking I want to take a screenshot
It winds me up.

How do I turn off and on?
AND... why and how does it turn on by itself?
I mean I don't turn on intentionally

Thanks.
 

Read other answers
RELEVANCY SCORE 62.8

HI TO ALL:
im having a problem with my pc that i mostly used..heres the situation :
my pc is working fine suddenly 1 day it slows and slightly hanging so i restarted it after restart problem occurs it powers on(all running: fans,hdd,dvd rom,cpu fan)then after 2 seconds it goes off automatically.so then i open the case and reseated all components(i know some basic troubleshooting) i tried to power on again and same things happen turn off after 2 seconds. i remove the gpu and connect my monitor to the onboard, so it starts finally and get me to "loading windows "then it go black screen, i restart it again by pressing the restart button and i boot trough enable vga mode by pressing f8.then it boots and it loads the windows and i can use it normally only on vga mode..so i downloaded the latest driver of my gpu's onboard and external.i uninstalled the drivers through vga mode then restart,again loading windows then black screen,restart againd and boot through vga mode install the updated drivers then reboot,loading windows then black screen with some pixelate flickering cursor on screen. (to make it short it only boots on enable vga mode..then i go replacing my psu with working from another pc and same thing happened..so then i reformat my pc and didnt installed any gpu including the onboard i disabled it..and its working fine with that..

note* with my external gpu installed it goes off after 2 seconds it power on.
with my onboard gpu enabled it gives black screen ... Read more

A:Pc turn on and immediately turn off after 2 seconds(with external gpu)

Read other 10 answers
RELEVANCY SCORE 62.8

Good day!

My cousin asked me to troubleshoot the problem of his desktop. He was telling me that it is not turning on. I was caught by surprise when i turned on the PC when suddenly I heard some kind of explosion. It sounds like a blown capacitor or something to that effect. I immediately unplug the power cord from the wall outlet. I checked all the capacitors and looking for any damage and fortunately it's all ok. I smell the PSU to check if there's any short circuit occured and there was no foul odor or something. I removed the PSU from the casing for and opened it for inspection. I found out that the fuse exploded and broke into 2 pieces. I don't bother to repair it but instead I bought a new 700 watts PSU.

After replacing the PSU I turned on the PC but i found out that the CPU fan will spin for half a second and turn off. Led green light is on but no post or beep sound. I did some troubleshooting and these are as follows:

1. I removed the motherboard from the casing and put it on top of the table with cardboard underneath.
2. Clean the RAM stick and tried on other slot.
3. Clean CPU heatsink and fan since it was clogged by dirt and replace thermal paste.
4. Replaced the CMOS battery and move jumper pin 1-2 to 2-3 for about 2 minutes.
5. I turn on the PC without the video card, hardisk and keyboard.

SPECS:
Motherboard: asus h81m-c
CPU: Intel core I7
RAM: 8gb

Btw, prior to the above steps, right after replacing PSU I just clean the RAM and turn it on but ... Read more

Read other answers
RELEVANCY SCORE 62.8

Immediately, I use Thinkpad Yoga 260 and now have a problem when it is turned off, then the next day my laptop turns on it doesn't want to turn on again. I pressed the power button, it just turned on the keyboard light for a while then died without having time to enter bios especially into Windows (the screen didn't have time to turn on). All indicator lights are on. Some of what I did;1. Press the reset button. This once managed to make my laptop turn on again, but then it had no effect.2. Also i update all software and Bios, but still forced same problem, then,3. I disassemble the laptop, pull out some connectors such as batteries, keyboards, and more. Some of these steps succeeded, until finally the problem arose and I went to the laptop service in my city.4. There was a slight problem with the supply of electric current on the motherboard and it was successfully fixed and my laptop turned on again. However, after one day the problem reappeared after the laptop was turned off. Luckily, my service place provides a one-month guarantee. But, I have returned to the service area with the same problem (more than 5 times). According to them, my motherboard has no problems, as well as other hardware. I still don't get the cause with this problem often arises. Sometimes a laptop can turn on only by pressing the reset button or opening the battery connector or plugging in the power cord and then I wait a while while the laptop is charging, and ... my laptop is back on... Read more

Read other answers
RELEVANCY SCORE 62.8

I want to discontinue use of McAfee (which came with the initial install) of my Windows 10 computer, and turn on Windows Defender.   I don't know where to start.

A:turn off mcafee and turn on defender in windows 10

Open the start menu. Select  "Control Panel". Select "Programs and Features". Find and select the McAfee program in the list then click "uninstall" at the top of the list. When it has finished uninstalling Windows Defender will activate itself.Go back to Control Panel again and select  "Security and Maintenance" . In the security drop down list it should say Windows Defender is turned on.

Read other 3 answers
RELEVANCY SCORE 62.8

If I unset "Allow the computer to turn off this device to save power" on the Power Management tab of my USB Root Hub properties, then when I attempt to restart my computer from the Start Menu, Windows shuts down but the computer itself keeps running,
i.e. the power light stays lit and the fan continues to run. In order to actually shutdown, I have to press the power button for a few seconds. Upon reboot, there is no indication of a failed shutdown from Windows. However, I am able to shutdown from the Start
Menu without problem.
Is this really the intent of not allowing the computer to turn off a device connected to a USB port, i.e. you can shutdown but you can't restart? Seems a bit arbitrary to me.
Windows 7 Home Premium 64-bit Service Pack 1
Acer Aspire 5560
AMD A6-3420M APU with Radeon HD Graphics 1.50 GHz
8.00 GB
All device drivers and the BIOS are up-to-date.

Read other answers
RELEVANCY SCORE 60.4

Hi,

I have a Samsung UHD tv series 8, a Pioneer receiver and a PS4. The receiver is connected to the HDMI Arc port on the tv. When I turn on my tv in the tv the PS4 and the receiver also turn on, each time my wife is screaming about that in the morning and I want to find a solution to this problem... I don't want to have all those advices on when I turn on my tv. Thanks for your help.

Serge
 

Read other answers
RELEVANCY SCORE 60.4

after serching all night to find out why his computer is in limbo, i leave my brother's house without finding needed help. his computer won't turn off...the fan, a couple little lights until he unplugs it from the wall. first, the computer did a restart all by itself, he said, then it would not turn on, except the fan and little lights inside that won't turn off. he took out the hard drive and it functions in his other computer...he puts the hard drive back into the new computer and it will not turn on or completely turn off that fan. he tried the "hold the on/off button for at least five seconds" step and nothing changes. he has had the computer for a year and a half, so he really wants to figure this out. how can he even get it to turn on so he could do a safe start up? so far we cannot find a way to troubleshoot. he have checked the cords, perhaps there was a freeze up that began this loop and that's why the fan stays on? please say this is something you have heard of and there may be a solution. the advice we have found usually goes back to buying a new computer. thanks in advance, tea
 

A:what's a girl to do when her computer won't turn off, or turn on?

Welcome to TechSpot

I'd unplug all drives and add-on cards (such as soundcard if there is one), and try booting then.
 

Read other 3 answers
RELEVANCY SCORE 60.4

If I turn the laptop off and back on again, like next morning etc the dongle doesn't connect to the internet, but if i then restart it, the dongle connects.

Why is this? anything else I can do?

Read other answers
RELEVANCY SCORE 60.4

why my hp x360 turn off  without warning and turn on again it turn off without warning and them turn on again?

Read other answers
RELEVANCY SCORE 60.4

Hi everyone,i have a trouble with my laptop, it auto turn off, then I cannot turn on, I have to wait around 15mins, then try to press turn on, so the laptop can start, but it only on around 45mins, then off again, I don't know what wrong with that, even I tried to hard reset it 

Read other answers
RELEVANCY SCORE 60.4

My HP pavilion refused to turn on in the morning after charged last night. The charging indicator light used came up at first but now nothing is working. I used working chargers and batteries from HP pavilion, still nothing. I removed the battery push the power button for a minute the fix the battery and on. Nothing. I used ram from other pavilion, still nothing. Please I need your help

Read other answers
RELEVANCY SCORE 60.4

Hello everyone, I have an HP Envy j100t which I purchased in 2014. ever since yesterday it's been starting but the screen remains pitch black, no display at all. It won't get to start up page, just remains a blank dark screen even though the power light is on and there's no battery issue because it was on charge all night and the AC adopter is still in.   I keep on having to get to get to the BIOS recovery screen, letting that update, and then it proceeds to restart. However when it restarts, it never gets to start up and there is the same dark screen- no display.  I have to always update BIOS, take out the battery and AC adapter, put them back in, and then it will start. Or sometimes even that whole process might not restart it.  Please help!

Read other answers
RELEVANCY SCORE 60.4

Hey all I'm new to this forum but I've built a few computers in the past but have never experienced any problems like this.

Case: Powerspec Cooler master case
Processor: Intel i5 750(quad core)
Motherboard: Gigabyte H55M-UD2H
Powersupply:OCZ 500 watt Mod X Stream-Pro

Here are some pictures of my build and a video of what is going on.

Video: youtube.com/watch?v=UbuFZJQnlds

As you can see the PSU, CPU, and Case fans are turning on and the Motherboard LED lights are blinking and then they quickly turn off. I dont think its a problem with the Power Supply because I have already returned one with the same issue thinking it was defective.

Pictures:

wont let me post pictures =/

Any help is appreciated, thanks for your time!
 

A:CPU and PSU fans turn on but then quickly turn off as does everything else

Does your current BIOS version support your CPU?

Your 4 pin power connector looks to be missing.... Top right of the video 8secs in.
 

Read other 14 answers
RELEVANCY SCORE 60.4

 I got hp z600 and i got geforce gtx 1070, I bought a power adapter 6 pin to 8 pin. I have the issue the PC will turn on and works fine but when i power it off and want to turn it on again it wont turn on at all. I have to unplug it and hold the reset button for few seconds then I plug it back again and it turns on. No it seems it is dead 100%. What can it be? too much power consumption from the video card? I got other hp z600 with gtx 1050 no external power required and it works great. Any suggestion? Thanks

Read other answers
RELEVANCY SCORE 60.4

Hello  i am writing my  mother laptop for some reason it acting very odd brand new not even few months old  Ok yesterday her laptop she could shut it down with no problem this morning she going out she turn it off bout close it.. but it decided turn back on not going thru booting it up with hp Icon no went straight away to windows 10 automaticaly.  So i decided to check some program see if anything conflicting it nothing  so i decided to shut it down thru windows 10  power shutdown but still turn back on..  i shut down it with power button but even still turn back on please help me   

Read other answers
RELEVANCY SCORE 60.4

Hello i've Toshiba C55-B5302 when i try to turn on and then turn off again. You can turn on the laptop as normal. The LED lights on the laptop light up, but once this is done, the laptop just runs for 5 seconds and it automatically shuts off again. You can hear the fan run for a while but other that it just turns off. So what is the cause for a problem like this? i've dissasemly it and clean the fan there's no dust, i've remove the battery and keep the power button for 60sec read it on other forum, press many times the power button without the battery and the charger to reset the bios info, but without any luck.
Cheers

Read other answers
RELEVANCY SCORE 60.4

I am using a client computer that is connected to a modem via a LAN cable which is in a neighboring house as far as about 50 meters. The host computer is there. The host computer is only using Internet Connection Sharing (without a router) to share its Internet connection with me. Within this network there are only two computers, the one I use (as client) in my house and the other one is the host computer as I mentioned earlier.

How do I know that the host computer is being turned on or off?

The purpose is to know so that I can use all the bandwidth from the modem when the host computer is not turn on. Because there are no restrictions on bandwidth from the host computer, and I just wanted to use all the available bandwidth only when the host computer is not turned on.

Both computers use Windows 7.

Read other answers
RELEVANCY SCORE 58.4

This just started happening. My T420s won't turn on using ON button -- it blinks a bit but nothing happens -- but it will turn on if I push and hold down the down-arrow button. The only problem is I have to keep holding the down-arrow button down. As soon as I lift off the down-arrow button it crashes. Wierd I know. Any ideas? I mainly want to use this laptop in the expansion tray with an external monitor so I am thinking of trying to put a pad on the down arrow button that a closed top will hold down but this is a bit of a kluge...

A:T420s won't turn on using ON button but will turn on if I push and hold down arrow button

OK ... first I gotta know .... what made you try holding down the down-arrow key?    Does the T420s have the "paper clip reset" hole on the bottom? This is the procedure for an X1:  https://is.wfu.edu/help-articles/hard-reset-for-lenovo-x1-carbon/ My T440s and T480 both have the hole....the hole is not in the same place on all the machines of course, but you get the idea.Or maybe you already tried this trick?  

Read other 1 answers
RELEVANCY SCORE 57.6

when i switch on it says main class not found what does this mean ?
 

A:error when i turn on

It's a java error indicating that something in your startups is looking for a java application but is not finding it or a part of it.

Let's see what you have starting.

Create a new, permanent folder for HijackThis and save the file to that. Run it and select "do a system scan and save the log file". Then copy/paste the contents of the log to a reply

Direct HijackThis download link: http://www.spywareinfo.com/~merijn/files/HijackThis.exe
 

Read other 1 answers
RELEVANCY SCORE 57.6

Windows Vista Home Premium, How can I turn off group policy, If I try to run defender or change startup programs, it will not allow me. Message to contact your system administrator to turn off group policy.  Please help

Read other answers
RELEVANCY SCORE 57.6

Can't give exact machine spec because I can't get it on.
AMD
350GB HDD
2 GB Ram
Windows 7 Home Premium 64 Bit


I could not figure out which category to post in so please help me!
I will give the back story and you can move the thread if you think it's in the wrong place...

Current issue is this>

I press the power button and the fan spins for maybe half a second and then stops - nothing else happens at all. No beeps, no sound, nothing. It's just dead.

Leading up to this was this sequence of events>

My pc was crashing out due to overheating.
It seemed to be that he thermal paste needed re applying.
So I bought thermal paste - followed the regular steps to apply etc, re-fitted the fan.

Powered on machine.
Saw usual start up screens with press del for setup etc.
Then> CPU fan error, press F1 to resume.
(The fan was spinning)
Pressed F1
It seemed as though star up was going to continue but instead screen went blank with just a flashing curser in top right corner.

Tried several re-starts.
Changed connection on CPU fan.
Same issue kept happening, exactly the same.

Went to bios and changed fan boot thing (can't think what it's called) to ignore.

Re-started.
Fan spinning. (no cpu fan error message)
Regulr boot process kicked in
Screen blank, then > Error loading Operating System.

Checked all internal wires etc. Unplugged unnecessary stuff like dvd sata cable etc. Replaced HDD sata cable with new Sata cable.

Re-started.
N... Read more

Read other answers
RELEVANCY SCORE 56.8

Looking for solutions to a number of crashes, cannot get any 'cos error reporting is off.
All the options in Action Center/Problem Report Settings are greyed out - with 'never check' selected.
'Change settings for all users' is also greyed out.
I am the only user and therefore also the administrator.
There are no group policies invoked as far as I am aware (never even heard of them before).
Looked at the tutorial on here, thought the REG file download was the only possible solution but I got a message 'This type of file could harm your computer' so was put off it.
Any other help would be much appreciated.

Windows 7 Home Premium SP1 Acer Aspire 7540

A:Cannot turn on error reporting

Windows says that about any exe. file or registry change. If you got it or your information here via tutorial's then its good to go. We have a well earned high reputation here at the forums and aim to keep it that way.

Read other 1 answers
RELEVANCY SCORE 56.8

Hello, we have a Medion XP computer and it suddenly started having the following error when we try to turn it on:

Windows could not start because the following file is missing or corrupt:
<Windows root>\system32\hal.dll.
Please re-install a copy of the above file.

What does this mean and how can we fix this error?

Thanks!

A:Error when trying to turn on the computer

http://www.google.com/search?hl=en&q...&aq=f&oq=&aqi=

Search through those hits and see if you have your XP CD's. Hope this solves the problem.

Read other 13 answers
RELEVANCY SCORE 56.8

The computer will turn on . When I try to log in an error message comes up , warmgr.exe/application error  the exception illegal instruction ( 0xc000001d) in application at location 0x3d403f1e. Another error message comes up @tUclient_32 : TuneupUtilities App64.exe-Application error . The instruction at 0x3d403ef0 referenced memory at 0x0003001a. memory couldn't be written.The issue is i cant even get into the computer to try and recover or even back up.

Read other answers
RELEVANCY SCORE 56.8

Hi everyone,

I have Windows Vista Home Premium and a few months ago when I turn on my computer, I have this DLL error:

Error loading C:/Users/NCarreira/AppData/Local/KBDamsas.dll

The specified module could not be found.

Iīve already searched for this .dll file and I didnīt found anything.

If someone could help me.

Sorry for my English,

Thanks
 

Read other answers
RELEVANCY SCORE 56.8

I'm going to try to add the image of this problem everything works fine after I click on OK. Thanks for all help & rep points. Also, I have not tried to type any commands.

A:cmd box and error at every turn on or reboot need help please!

  
Quote: Originally Posted by p5200


I'm going to try to add the image of this problem everything works fine after I click on OK. Thanks for all help & rep points. Also, I have not tried to type any commands.


Do you run an AV program? I would suggest checking for a virus/infection.

HTH

Read other 8 answers
RELEVANCY SCORE 56.8

last night as i went to switch my laptop off i kept getting the following message :- windows is currently working with a file
close this file before switching off

the only things i had done prior to that was tidy my music albums photos ect
change my mouse pointer and set it to automaticlly move to the desired are after an action im sure you all know the feture im talking about anyway i had to take the batter out of my laptop and power cable as when i tryed to do a hard reboot it would pop the message up over and over again filling my screen with the same msg the problem i switched it back on again and it turned off normally but im worried it will happen again and want to know if anyone has any ideas what this could be
 

Read other answers
RELEVANCY SCORE 56.8

What does this mean?
C\Progra~1\MYWEBS~1\bar\3.bin\M3PLUGIN.DLL
The specified module could not be found
I saw a similar posting on your web site but it talks about something called HiJack this. I don't think I have that program. I am currently using web root as an anti virus program, also since the pc is still new I'm running norton anti virus on a 60 day trial basis, of which 9 days remain. I thought this was more than enough to keep me protected.
 

A:error message pop up when ever I turn pc on

Hi and welcome to TSGF first you can get hijackthis here http://free.antivirus.com/hijackthis/ next you need to remove one of the antivirus running 2 does not help you and can cause issues,next I suggest you go to our security and hijack forum please follow the instructions here http://forums.techguy.org/malware-removal-hijackthis-logs/622404-please-read-here-first-before.html let them check out your computer and come back if you need futher help
 

Read other 1 answers